summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/phy.c
Commit message (Collapse)AuthorAgeFilesLines
* net: phy: Correctly process PHY_HALTED in phy_stop_machine()Florian Fainelli2017-07-311-0/+3
| | | | | | | | | | | | | | | | | | | Marc reported that he was not getting the PHY library adjust_link() callback function to run when calling phy_stop() + phy_disconnect() which does not indeed happen because we set the state machine to PHY_HALTED but we don't get to run it to process this state past that point. Fix this with a synchronous call to phy_state_machine() in order to have the state machine actually act on PHY_HALTED, set the PHY device's link down, turn the network device's carrier off and finally call the adjust_link() function. Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Fixes: a390d1f379cf ("phylib: convert state_queue work to delayed_work") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2017-07-051-31/+32
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-06-151-0/+2
| |\ | | | | | | | | | | | | | | | | | | The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: phy: Make phy_ethtool_ksettings_get return voidyuval.shaia@oracle.com2017-06-131-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-06-061-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Just some simple overlapping changes in marvell PHY driver and the DSA core code. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: hook up clause 45 autonegotiation restartRussell King2017-06-061-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | genphy_restart_aneg() can only restart autonegotiation on clause 22 PHYs. Add a phy_restart_aneg() function which selects between the clause 22 and clause 45 restart functionality depending on the PHY type and whether the Clause 45 PHY supports the Clause 22 register set. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: avoid genphy_aneg_done() for PHYs without clause 22 supportRussell King2017-06-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid calling genphy_aneg_done() for PHYs that do not implement the Clause 22 register set. Clause 45 PHYs may implement the Clause 22 register set along with the Clause 22 extension MMD. Hence, we can't simply block access to the Clause 22 functions based on the PHY being a Clause 45 PHY. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: Delete unused function phy_ethtool_gsetyuval.shaia@oracle.com2017-06-061-24/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's unused, so remove it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge tag 'docs-4.13' of git://git.lwn.net/linuxLinus Torvalds2017-07-031-0/+1
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull documentation updates from Jonathan Corbet: "There has been a fair amount of activity in the docs tree this time around. Highlights include: - Conversion of a bunch of security documentation into RST - The conversion of the remaining DocBook templates by The Amazing Mauro Machine. We can now drop the entire DocBook build chain. - The usual collection of fixes and minor updates" * tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits) scripts/kernel-doc: handle DECLARE_HASHTABLE Documentation: atomic_ops.txt is core-api/atomic_ops.rst Docs: clean up some DocBook loose ends Make the main documentation title less Geocities Docs: Use kernel-figure in vidioc-g-selection.rst Docs: fix table problems in ras.rst Docs: Fix breakage with Sphinx 1.5 and upper Docs: Include the Latex "ifthen" package doc/kokr/howto: Only send regression fixes after -rc1 docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters doc: Document suitability of IBM Verse for kernel development Doc: fix a markup error in coding-style.rst docs: driver-api: i2c: remove some outdated information Documentation: DMA API: fix a typo in a function name Docs: Insert missing space to separate link from text doc/ko_KR/memory-barriers: Update control-dependencies example Documentation, kbuild: fix typo "minimun" -> "minimum" docs: Fix some formatting issues in request-key.rst doc: ReSTify keys-trusted-encrypted.txt doc: ReSTify keys-request-key.txt ...
| * | | net: fix some identation issues at kernel-doc markupsMauro Carvalho Chehab2017-05-161-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sphinx is very pedantic with regards to identation and escape sequences: ./include/net/sock.h:1967: ERROR: Unexpected indentation. ./include/net/sock.h:1969: ERROR: Unexpected indentation. ./include/net/sock.h:1970: WARNING: Block quote ends without a blank line; unexpected unindent. ./include/net/sock.h:1971: WARNING: Block quote ends without a blank line; unexpected unindent. ./include/net/sock.h:2268: WARNING: Inline emphasis start-string without end-string. ./net/core/sock.c:2686: ERROR: Unexpected indentation. ./net/core/sock.c:2687: WARNING: Block quote ends without a blank line; unexpected unindent. ./net/core/datagram.c:182: WARNING: Inline emphasis start-string without end-string. ./include/linux/netdevice.h:1444: ERROR: Unexpected indentation. ./drivers/net/phy/phy.c:381: ERROR: Unexpected indentation. ./drivers/net/phy/phy.c:382: WARNING: Block quote ends without a blank line; unexpected unindent. - Fix spacing where needed; - Properly escape constants; - Use a literal block for a race description. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* | / net: phy: add missing SPEED_14000Joe Perches2017-06-091-0/+2
| |/ |/| | | | | | | | | | | Fixes: 0d7e2d2166f6 ("IB/ipoib: add get_link_ksettings in ethtool") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: fix kernel-doc warningsRandy Dunlap2017-06-051-1/+1
|/ | | | | | | | | | | Fix kernel-doc warnings (typo) in drivers/net/phy/phy.c: ..//drivers/net/phy/phy.c:259: warning: No description found for parameter 'features' ..//drivers/net/phy/phy.c:259: warning: Excess function parameter 'feature' description in 'phy_lookup_setting' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-04-261-4/+36
|\ | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: fix auto-negotiation stall due to unavailable interruptAlexander Kochetkov2017-04-261-4/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Cc: stable <stable@vger.kernel.org> # v4.9+ Tested-by: Roger Quadros <rogerq@ti.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: simplify phy_supported_speeds()Russell King2017-04-171-10/+4
| | | | | | | | | | | | | | Simplify the loop in phy_supported_speeds(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: improve phylib correctness for non-autoneg settingsRussell King2017-04-171-43/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | phylib has some undesirable behaviour when forcing a link mode through ethtool. phylib uses this code: idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex), features); to find an index in the settings table. phy_find_setting() starts at index 0, and scans upwards looking for an exact speed and duplex match. When it doesn't find it, it returns MAX_NUM_SETTINGS - 1, which is 10baseT-Half duplex. phy_find_valid() then scans from the point (and effectively only checks one entry) before bailing out, returning MAX_NUM_SETTINGS - 1. phy_sanitize_settings() then sets ->speed to SPEED_10 and ->duplex to DUPLEX_HALF whether or not 10baseT-Half is supported or not. This goes against all the comments against these functions, and 10baseT-Half may not even be supported by the hardware. Rework these functions, introducing a new method of scanning the table. There are two modes of lookup that phylib wants: exact, and inexact. - in exact mode, we return either an exact match or failure - in inexact mode, we return an exact match if it exists, a match at the highest speed that is not greater than the requested speed (ignoring duplex), or failing that, the lowest supported speed, or failure. The biggest difference is that we always check whether the entry is supported before further consideration, so all unsupported entries are not considered as candidates. This results in arguably saner behaviour, better matches the comments, and is probably what users would expect. This becomes important as ethernet speeds increase, PHYs exist which do not support the 10Mbit speeds, and half-duplex is likely to become obsolete - it's already not even an option on 10Gbit and faster links. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-04-061-1/+1
|\| | | | | | | | | | | | | Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: handle state correctly in phy_stop_machineNathan Sullivan2017-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189d984 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Brad Mouring <brad.mouring@ni.com> Acked-by: Xander Huff <xander.huff@ni.com> Acked-by: Kyle Roeschley <kyle.roeschley@ni.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | phy/ethtool: Add missing SPEED_<foo> stringsJoe Perches2017-04-051-0/+14
| | | | | | | | | | | | | | Add all the currently available SPEED_<foo> strings. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: allow EEE with any interface modeRussell King2017-04-011-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EEE is able to work in any PHY interface mode, there is nothing which fundamentally restricts it to only a few modes. For example, EEE works in SGMII mode with the Marvell 88E1512. Rather than just adding SGMII mode to the list, Florian suggests removing the list of interface modes entirely: It actually sounds like we should just kill the check entirely, it does not appear that any of the interface mode would not fundamentally be able to support EEE, because the "lowest" mode we support is MII, and even there it's quite possible to support EEE. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: restart phy autonegotiation after EEE advertisment changeRussell King2017-04-011-2/+19
| | | | | | | | | | | | | | | | | | | | When the EEE advertisment is changed, we should restart autonegotiation to update the link partner with the new EEE settings. Add this trigger but only if the advertisment has changed. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: avoid setting unsupported EEE advertismentsRussell King2017-04-011-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently allow userspace to set any EEE advertisments it desires, whether or not the PHY supports them. For example: # ethtool --set-eee eth1 advertise 0xffffffff # ethtool --show-eee eth1 EEE Settings for eth1: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full 1000baseKX/Full 10000baseT/Full 10000baseKX4/Full 10000baseKR/Full Clearly, this is not sane, we should only allow link modes that are supported to be advertised (as we do elsewhere.) Ensure that we mask the MDIO_AN_EEE_ADV value with the capabilities retrieved from the MDIO_PCS_EEE_ABLE register. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: switch remaining users to phy_(read|write)_mmd()Russell King2017-03-221-15/+10
| | | | | | | | | | | | | | | | | | | | | | Switch everyone over to using phy_read_mmd() and phy_write_mmd() now that they are able to handle both Clause 22 indirect addressing and Clause 45 direct addressing methods to the MMD registers. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: move phy MMD accessors to phy-core.cRussell King2017-03-221-85/+0
|/ | | | | | | | | | | | Move the phy_(read|write)__mmd() helpers out of line, they will become our main MMD accessor functions, and so will be a little more complex. This complexity doesn't belong in an inline function. Also move the _indirect variants as well to keep like functionality together. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Add missing driver check in phy_aneg_done()Florian Fainelli2017-02-241-1/+1
| | | | | | | | | | Dan's static checker caught a potential code path in phy_state_machine() where we were not checking phydev->drv which is in phy_aneg_done(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 25149ef9d25c ("net: phy: Check phydev->drv") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Check phydev->drvFlorian Fainelli2017-02-201-4/+22
| | | | | | | | | | | | | | There are number of function calls, originating from user-space, typically through the Ethernet driver that can make us crash by dereferencing phydev->drv which will be NULL once we unbind the driver from the PHY. There are still functional issues that prevent an unbind then rebind to work, but these will be addressed separately. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: leds: Break dependency of phy.h on phy_led_triggers.hGeert Uytterhoeven2017-01-251-0/+1
| | | | | | | | | | | <linux/phy.h> includes <linux/phy_led_triggers.h>, which is not really needed. Drop the include from <linux/phy.h>, and add it to all users that didn't include it explicitly. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Avoid deadlock during phy_error()Florian Fainelli2017-01-231-5/+9
| | | | | | | | | | | | | | phy_error() is called in the PHY state machine workqueue context, and calls phy_trigger_machine() which does a cancel_delayed_work_sync() of the workqueue we execute from, causing a deadlock situation. Augment phy_trigger_machine() machine with a sync boolean indicating whether we should use cancel_*_sync() or just cancel_*_work(). Fixes: 3c293f4e08b5 ("net: phy: Trigger state machine on state change and not polling.") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy state machine: failsafe leave invalid RUNNING stateZefir Kurtisi2017-01-091-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: update the mdix_ctrl with correct value.Raju Lakkaraju2016-12-011-4/+6
| | | | | | | | Update the mdix and mdix_ctrl with corresponding ethtool configuration parameters. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: add an option to disable EEE advertisementjbrunet2016-11-291-0/+3
| | | | | | | | | | | | | | | This patch adds an option to disable EEE advertisement in the generic PHY by providing a mask of prohibited modes corresponding to the value found in the MDIO_AN_EEE_ADV register. On some platforms, PHY Low power idle seems to be causing issues, even breaking the link some cases. The patch provides a convenient way for these platforms to disable EEE advertisement and work around the issue. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Add phy_ethtool_nway_resetFlorian Fainelli2016-11-151-0/+11
| | | | | | | | This function just calls into genphy_restart_aneg() to perform an autonegotation restart. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: expose phy_aneg_done API for use by driversLendacky, Thomas2016-11-131-1/+2
| | | | | | | | | | | Make phy_aneg_done() available to drivers so that the result of the auto-negotiation initiated by phy_start_aneg() can be determined. Remove the local implementation of phy_aneg_done() from the Aeroflex driver and use the phy library version. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: leds: add support for led triggers on phy link state changeZach Brown2016-10-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Create phy_supported_speeds function which lists speeds currently ↵Zach Brown2016-10-181-0/+35
| | | | | | | | | | supported by a phydevice phy_supported_speeds provides a means to get a list of all the speeds a phy device currently supports. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Encapsulate actions performed during link state changes into ↵Zach Brown2016-10-181-8/+13
| | | | | | | | | | | | | | | | function phy_adjust_link During phy state machine state transitions some set of actions should occur whenever the link state changes. These actions should be encapsulated into a single function This patch adds the phy_adjust_link function, which is called whenever phydev->adjust_link would have been called before. Actions that should occur whenever the phy link is adjusted can now be added to the phy_adjust_link function. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Use phy name when requesting the interruptAndrew Lunn2016-10-171-2/+1
| | | | | | | | | | | Using the fixed name "phy_interrupt" is not very informative in /proc/interrupts when there are a lot of phys, e.g. a device with an Ethernet switch. So when requesting the interrupt, use the name of the phy. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Threaded interrupts allow some simplificationAndrew Lunn2016-10-171-19/+26
| | | | | | | | | | | The PHY interrupts are now handled in a threaded interrupt handler, which can sleep. The work queue is no longer needed, phy_change() can be called directly. phy_mac_interrupt() still needs to be safe to call in interrupt context, so keep the work queue, and use a helper to call phy_change(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Use threaded IRQ, to allow IRQ from sleeping devicesAndrew Lunn2016-10-171-4/+4
| | | | | | | | | | | | The interrupt lines from PHYs maybe connected to I2C bus expanders, or from switches on MDIO busses. Such interrupts are sourced from devices which sleep, so use threaded interrupts. Threaded interrupts require that the interrupt requester also uses the threaded API. Change the phylib to use the threaded API, which is backwards compatible with none-threaded IRQs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Trigger state machine on state change and not polling.Andrew Lunn2016-10-131-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | The phy_start() is used to indicate the PHY is now ready to do its work. The state is changed, normally to PHY_UP which means that both the MAC and the PHY are ready. If the phy driver is using polling, when the next poll happens, the state machine notices the PHY is now in PHY_UP, and kicks off auto-negotiation, if needed. If however, the PHY is using interrupts, there is no polling. The phy is stuck in PHY_UP until the next interrupt comes along. And there is no reason for the PHY to interrupt. Have phy_start() schedule the state machine to run, which both speeds up the polling use case, and makes the interrupt use case actually work. This problems exists whenever there is a state change which will not cause an interrupt. Trigger the state machine in these cases, e.g. phy_error(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kyle Roeschley <kyle.roeschley@ni.com> Tested-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "phy: IRQ cannot be shared"Xander Huff2016-08-251-2/+4
| | | | | | | | | | | | | | | | | | This reverts: commit 33c133cc7598 ("phy: IRQ cannot be shared") On hardware with multiple PHY devices hooked up to the same IRQ line, allow them to share it. Sergei Shtylyov says: "I'm not sure now what was the reason I concluded that the IRQ sharing was impossible... most probably I thought that the kernel IRQ handling code exited the loop over the IRQ actions once IRQ_HANDLED was returned -- which is obviously not so in reality..." Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-05-151-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phylib: fix interrupts re-enablement in phy_startShaohui Xie2016-05-101-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | If phy was suspended and is starting, current driver always enable phy's interrupts, if phy works in polling, phy can raise unexpected interrupt which will not be handled, the interrupt will block system enter suspend again. So interrupts should only be re-enabled if phy works in interrupt. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: add phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-05-101-0/+24
| | | | | | | | | | | | | | | | | | | | Ethtool callbacks {get|set}_link_ksettings are often the same, so we add two generics functions phy_ethtool_{get|set}_link_ksettings to avoid writing severals times the same function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-By: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | phy: add generic function to support ksetting supportPhilippe Reynes2016-04-181-0/+81
|/ | | | | | | | | | | The old ethtool api (get_setting and set_setting) has generic phy functions phy_ethtool_sset and phy_ethtool_gset. To supprt the new ethtool api (get_link_ksettings and set_link_ksettings), we add generic phy function phy_ethtool_ksettings_get and phy_ethtool_ksettings_set. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Fix phy_mac_interrupt()Florian Fainelli2016-01-211-13/+18
| | | | | | | | | | | | | | | | | | | | | Commit 5ea94e7686a3 ("phy: add phy_mac_interrupt()") to use with PHY_IGNORE_INTERRUPT added a cancel_work_sync() into phy_mac_interrupt() which is allowed to sleep, whereas phy_mac_interrupt() is expected to be callable from interrupt context. Now that we have fixed how the PHY state machine treats PHY_IGNORE_INTERRUPT with respect to state changes, we can just set the new link state, and queue the PHY state machine for execution so it is going to read the new link state. For that to work properly, we need to update phy_change() not to try to invoke any interrupt callbacks if we have configured the PHY device for PHY_IGNORE_INTERRUPT, because that PHY device and its driver are not required to implement those. Fixes: 5ea94e7686a3 ("phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPT") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTSFlorian Fainelli2016-01-211-5/+10
| | | | | | | | | | | | | | | | Commit 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") changed a hunk in phy_state_machine() in the PHY_RUNNING case which was not needed. The change essentially makes the PHY library treat PHY devices with PHY_IGNORE_INTERRUPT to keep polling for the PHY device, even though the intent is not to do it. Fix this by reverting that specific hunk, which makes the PHY state machine wait for state changes, and stay in the PHY_RUNNING state for as long as needed. Fixes: 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add an mdio_device structureAndrew Lunn2016-01-071-12/+13
| | | | | | | | | Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn2016-01-071-22/+14
| | | | | | | | | The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add phydev_err() and phydev_dbg() macrosAndrew Lunn2016-01-071-2/+3
| | | | | | | | | In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 11:20:49 +0000