summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
Commit message (Collapse)AuthorAgeFilesLines
* net: sfp: relax bitrate-derived mode checkRussell King2020-12-091-6/+5
| | | | | | | | | | | | | Do not check the encoding when deriving 1000BASE-X from the bitrate when no other modes are discovered. Some GPON modules (VSOL V2801F and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a 1200Mbaud bitrate, but should be driven with 1000BASE-X on the host side. Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaroundRussell King2020-12-091-5/+58
| | | | | | | | | | | | | | | | | | Add a workaround for the detection of VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single byte I2C reads to the EEPROM. Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module, which reports a manufacturer of "OEM". This manufacturer can't be matched as it appears in many different modules, so also match the part number too. Reported-by: Thomas Schreiber <tschreibe@gmail.com> Reported-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: marvell: replace phy_modify()Yejune Deng2020-12-011-8/+8
| | | | | | | | a set of phy_set_bits() looks more neater Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Link: https://lore.kernel.org/r/1606732895-9136-1-git-send-email-yejune.deng@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: micrel: fix interrupt handlingOleksij Rempel2020-11-271-1/+1
| | | | | | | | | | | | After migration to the shared interrupt support, the KSZ8031 PHY with enabled interrupt support was not able to notify about link status change. Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201127123621.31234-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: realtek: read actual speed on rtl8211f to detect downshiftAntonio Borneo2020-11-251-0/+1
| | | | | | | | | | | | | | | | | | | | The rtl8211f supports downshift and before commit 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") the read-back of register MII_CTRL1000 was used to detect the negotiated link speed. The code added in commit d445dff2df60 ("net: phy: realtek: read actual speed to detect downshift") is working fine also for this phy and it's trivial re-using it to restore the downshift detection on rtl8211f. Add the phy specific read_status() pointing to the existing function rtlgen_read_status(). Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Link: https://lore.kernel.org/r/478f871a-583d-01f1-9cc5-2eea56d8c2a7@huawei.com Tested-by: Yonglong Liu <liuyonglong@huawei.com> Link: https://lore.kernel.org/r/20201124230756.887925-1-antonio.borneo@st.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: mscc: use new PTP_MSGTYPE_* definesChristian Eggers2020-11-252-12/+7
| | | | | | | | | | Use recently introduced PTP_MSGTYPE_SYNC and PTP_MSGTYPE_DELAY_REQ defines instead of a driver internal enumeration. Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Antoine Tenart <atenart@kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: dp83640: use new PTP_MSGTYPE_SYNC defineChristian Eggers2020-11-251-4/+1
| | | | | | | | | Replace use of magic number with recently introduced define. Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: remove the .did_interrupt() and .ack_interrupt() callbackIoana Ciornei2020-11-252-47/+3
| | | | | | | | | | | | | | | Now that all the PHY drivers have been migrated to directly implement the generic .handle_interrupt() callback for a seamless support of shared IRQs and all the .config_inter() implementations clear any pending interrupts, we can safely remove the two callbacks. With this patch, phylib has a proper support for shared IRQs (and not just for multi-PHY devices. A PHY driver must implement both the .handle_interrupt() and .config_intr() callbacks for the IRQs to be actually used. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: qsemi: remove the use of .ack_interrupt()Ioana Ciornei2020-11-251-3/+17
| | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Also, add a comment describing the multiple step interrupt acknoledgement process. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: qsemi: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-251-0/+22
| | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: ti: remove the use of .ack_interrupt()Ioana Ciornei2020-11-256-31/+56
| | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: ti: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-256-0/+191
| | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: national: remove the use of the .ack_interrupt()Ioana Ciornei2020-11-251-14/+22
| | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: national: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-251-0/+22
| | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: micrel: remove the use of .ack_interrupt()Ioana Ciornei2020-11-251-16/+15
| | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Divya Koppera <Divya.Koppera@microchip.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Marek Vasut <marex@denx.de> Cc: Antoine Tenart <atenart@kernel.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: micrel: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-251-0/+34
| | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Divya Koppera <Divya.Koppera@microchip.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Marek Vasut <marex@denx.de> Cc: Antoine Tenart <atenart@kernel.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: meson-gxl: remove the use of .ack_callback()Ioana Ciornei2020-11-251-8/+11
| | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: meson-gxl: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-251-0/+20
| | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: icplus: remove the use .ack_interrupt()Ioana Ciornei2020-11-251-13/+25
| | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: icplus: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-251-8/+16
| | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: intel-xway: remove the use of .ack_interrupt()Ioana Ciornei2020-11-251-12/+15
| | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Mathias Kresin <dev@kresin.me> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: intel-xway: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-251-18/+28
| | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Mathias Kresin <dev@kresin.me> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* mdio_bus: suppress err message for reset gpio EPROBE_DEFERGrygorii Strashko2020-11-201-3/+4
| | | | | | | | | | | | | | | | | | The mdio_bus may have dependencies from GPIO controller and so got deferred. Now it will print error message every time -EPROBE_DEFER is returned which from: __mdiobus_register() |-devm_gpiod_get_optional() without actually identifying error code. "mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO" Hence, suppress error message for devm_gpiod_get_optional() returning -EPROBE_DEFER case by using dev_err_probe(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20201119203446.20857-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-11-192-2/+3
|\ | | | | | | Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: phy: smsc: add missed clk_disable_unprepare in smsc_phy_probe()Zhang Changzhong2020-11-141-1/+3
| | | | | | | | | | | | | | | | | | | | | | Add the missing clk_disable_unprepare() before return from smsc_phy_probe() in the error handling case. Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605180239-1792-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: phy: mscc: remove non-MACSec compatible phySteen Hegelund2020-11-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Selecting VSC8575 as a MACSec PHY was not correct The relevant datasheet can be found here: - VSC8575: https://www.microchip.com/wwwproducts/en/VSC8575 History: v1 -> v2: - Corrected the sha in the "Fixes:" tag Fixes: 1bbe0ecc2a1a ("net: phy: mscc: macsec initialization") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201113091116.1102450-1-steen.hegelund@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: fix kernel-doc markupsMauro Carvalho Chehab2020-11-175-5/+5
| | | | | | | | | | | | | | | | | | Some functions have different names between their prototypes and the kernel-doc markup. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: adin: remove the use of the .ack_interrupt()Ioana Ciornei2020-11-171-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: adin: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: ste10Xp: remove the use of .ack_interrupt()Ioana Ciornei2020-11-171-19/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: ste10Xp: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: smsc: remove the use of .ack_interrupt()Ioana Ciornei2020-11-171-15/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Andre Edich <andre.edich@microchip.com> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: smsc: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Andre Edich <andre.edich@microchip.com> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: amd: remove the use of .ack_interrupt()Ioana Ciornei2020-11-171-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: amd: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: nxp-tja11xx: remove the use of .ack_interrupt()Ioana Ciornei2020-11-171-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Marek Vasut <marex@denx.de> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: nxp-tja11xx: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Marek Vasut <marex@denx.de> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: lxt: remove the use of .ack_interrupt()Ioana Ciornei2020-11-171-10/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: lxt: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: marvell: remove the use of .ack_interrupt()Ioana Ciornei2020-11-171-20/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: marvell: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-21/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: microchip: remove the use of .ack_interrupt()Ioana Ciornei2020-11-172-18/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: microchip: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-172-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: vitesse: remove the use of .ack_interrupt()Ioana Ciornei2020-11-171-21/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: vitesse: implement generic .handle_interrupt() callbackIoana Ciornei2020-11-171-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: don't duplicate driver name in phy_attached_printHeiner Kallweit2020-11-171-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we print the driver name twice in phy_attached_print(): - phy_dev_info() prints it as part of the device info - and we print it as part of the info string This is a little bit ugly, it makes the info harder to read, especially if the driver name is a little bit longer. Therefore omit the driver name (if set) in the info string. Example from r8169 that uses phylib: old: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \ [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) new: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \ (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/8ab72586-f079-41d8-84ee-9f6a5bd97b2a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: mscc: fix excluded_middle.cocci warningskernel test robot2020-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2011161633240.2682@hadrien Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: mscc: Add PTP support for 2 more VSC PHYsSteen Hegelund2020-11-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Add VSC8572 and VSC8574 in the PTP configuration as they also support PTP. The relevant datasheets can be found here: - VSC8572: https://www.microchip.com/wwwproducts/en/VSC8572 - VSC8574: https://www.microchip.com/wwwproducts/en/VSC8574 Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Link: https://lore.kernel.org/r/20201112092250.914079-1-steen.hegelund@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-11-121-0/+2
|\| | | | | | | Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: phy: realtek: support paged operations on RTL8201CPHeiner Kallweit2020-11-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The RTL8401-internal PHY identifies as RTL8201CP, and the init sequence in r8169, copied from vendor driver r8168, uses paged operations. Therefore set the same paged operation callbacks as for the other Realtek PHY's. Fixes: cdafdc29ef75 ("r8169: sync support for RTL8401 with vendor driver") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/69882f7a-ca2f-e0c7-ae83-c9b6937282cd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 00:59:57 +0000