summaryrefslogtreecommitdiffstats
path: root/drivers/net/usb
Commit message (Collapse)AuthorAgeFilesLines
* cdc_ncm: Fix tx_bytes statisticsBjørn Mork2015-05-221-1/+1
| | | | | | | | | | | | | | | The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by: Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e2168 ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: avoid integer overflow in start_xmitJason A. Donenfeld2015-05-091-2/+2
| | | | | | | | | | | | transfer_buffer_length is of type u32. It's therefore wrong to assign it to a signed integer. This patch avoids the overflow. It's worth noting that entry->length here is a long; perhaps it would be beneficial at somepoint to change this to be unsigned as well, if nothing else relies on its signedness for error conditions or the like. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/usb: Add support for 'Lenovo OneLink Pro Dock'Vasily Titskiy2015-05-091-0/+1
| | | | | | | | This device is sold as 'Lenovo OneLink Pro Dock'. Chipset is RTL8153 and works with r8152. Signed-off-by: Vasily Titskiy <qehgt0@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-04-141-2/+2
|\ | | | | | | | | | | | | The dwmac-socfpga.c conflict was a case of a bug fix overlapping changes in net-next to handle an error pointer differently. Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: rename work handlerOliver Neukum2015-04-091-2/+2
| | | | | | | | | | | | | | | | | | "kevent" is an extremely generic name that causes trouble if debugging for work queues is used. So change it to something clear. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-04-026-9/+28
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/usb/r8152: add device id for Lenovo TP USB 3.0 EthernetChristian Hesse2015-03-312-0/+10
| | | | | | | | | | | | | | | | This device is sold as 'Lenovo Tinkpad USB 3.0 Ethernet 4X90E51405'. Chipset is RTL8153 and works with r8152. Signed-off-by: Christian Hesse <mail@eworm.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: Fix tx_bytes statistic running backward in cdc_ncmBen Hutchings2015-03-294-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no>
| * usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings2015-03-294-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cx82310_eth: fix semicolon.cocci warningsWu Fengguang2015-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | drivers/net/usb/cx82310_eth.c:175:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-231-6/+24
|\| | | | | | | | | | | | | | | | | | | Conflicts: net/netfilter/nf_tables_core.c The nf_tables_core.c conflict was resolved using a conflict resolution from Stephen Rothwell as a guide. Signed-off-by: David S. Miller <davem@davemloft.net>
| * cx82310_eth: wait for firmware to become readyOndrej Zary2015-03-211-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the device is powered up, some (older) firmware versions fail to work properly if we send commands before the boot is complete (everything is OK when the device is hot-plugged). The firmware indicates its ready status by putting the link up. Newer firmwares delay the first command so they don't suffer from this problem. They also report the link being always up. Wait for firmware to become ready (link up) before sending any commands and/or data. This also allows lowering CMD_TIMEOUT value to a reasonable time. Tested with 4.1.0.9 (old) and 4.1.0.30 (new) firmware versions. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-201-1/+10
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "net: cx82310_eth: use common match macro"Ondrej Zary2015-03-181-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 11ad714b98f6d9ca0067568442afe3e70eb94845 because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-034-7/+17
|\| | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-03-034-1/+11
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) If an IPVS tunnel is created with a mixed-family destination address, it cannot be removed. Fix from Alexey Andriyanov. 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo Neira Ayuso. 3) Generic statistics infrastructure can reference variables sitting on a released function stack, therefore use dynamic allocation always. Fix from Ignacy Gawędzki. 4) skb_copy_bits() return value test is inverted in ip_check_defrag(). 5) Fix network namespace exit in openvswitch, we have to release all of the per-net vports. From Pravin B Shelar. 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter. 7) Fix rhashtable grow/shrink behavior, only expand during inserts and shrink during deletes. From Daniel Borkmann. 8) Netdevice names with semicolons should never be allowed, because they serve as a separator. From Matthew Thode. 9) Use {,__}set_current_state() where appropriate, from Fabian Frederick. 10) Revert byte queue limits support in r8169 driver, it's causing regressions we can't figure out. 11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to measure packets in flight, properly use tcp_packets_in_flight() instead. From Neal Cardwell. 12) Fix accidental removal of support for bluetooth in CSR based Intel wireless cards. From Marcel Holtmann. 13) We accidently added a behavioral change between native and compat tasks, wrt testing the MSG_CMSG_COMPAT bit. Just ignore it if the user happened to set it in a native binary as that was always the behavior we had. From Catalin Marinas. 14) Check genlmsg_unicast() return valud in hwsim netlink tx frame handling, from Bob Copeland. 15) Fix stale ->radar_required setting in mac80211 that can prevent starting new scans, from Eliad Peller. 16) Fix memory leak in nl80211 monitor, from Johannes Berg. 17) Fix race in TX index handling in xen-netback, from David Vrabel. 18) Don't enable interrupts in amx-xgbe driver until all software et al. state is ready for the interrupt handler to run. From Thomas Lendacky. 19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric W Biederman. 20) The amount of header space needed in macvtap was not calculated properly, fix it otherwise we splat past the beginning of the packet. From Eric Dumazet. 21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin. 22) Don't raw initialize or mod timers, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 23) Fix software maintained statistics in bcmgenet and systemport drivers, from Florian Fainelli. 24) DMA descriptor updates in sh_eth need proper memory barriers, from Ben Hutchings. 25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal Kubecek. 26) Openvswitch's non-masked set actions aren't constructed properly into netlink messages, fix from Joe Stringer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) openvswitch: Fix serialization of non-masked set actions. gianfar: Reduce logging noise seen due to phy polling if link is down ibmveth: Add function to enable live MAC address changes net: bridge: add compile-time assert for cb struct size udp: only allow UFO for packets from SOCK_DGRAM sockets sh_eth: Really fix padding of short frames on TX Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" sh_eth: Fix RX recovery on R-Car in case of RX ring underrun sh_eth: Ensure proper ordering of descriptor active bit write/read net/mlx4_en: Disbale GRO for incoming loopback/selftest packets net/mlx4_core: Fix wrong mask and error flow for the update-qp command net: systemport: fix software maintained statistics net: bcmgenet: fix software maintained statistics rxrpc: don't multiply with HZ twice rxrpc: terminate retrans loop when sending of skb fails net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface. net: pasemi: Use setup_timer and mod_timer net: stmmac: Use setup_timer and mod_timer net: 8390: axnet_cs: Use setup_timer and mod_timer net: 8390: pcnet_cs: Use setup_timer and mod_timer ...
| | * net: asix: add support for the Sitecom LN-028 USB adapterLuca Ceresoli2015-02-272-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just another AX88178-based 10/100/1000 USB-to-Ethernet dongle. This one shows up in lsusb as: "Sitecom Europe B.V. LN-028 Network USB 2.0 Adapter". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| | * hso: replace current->state by __set_current_state()Fabian Frederick2015-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * usb: plusb: Add support for National Instruments host-to-host cableBen Shelton2015-02-201-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | The National Instruments USB Host-to-Host Cable is based on the Prolific PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'kconfig' of ↵Linus Torvalds2015-02-191-6/+6
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
| | * kconfig: use bool instead of boolean for type definition attributesChristoph Jaeger2015-01-071-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for keyword 'boolean' will be dropped later on. No functional change. Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* | | net: usb: Use eth_<foo>_addr instead of memsetJoe Perches2015-03-034-5/+5
| | | | | | | | | | | | | | | | | | | | | Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings2015-02-284-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: always read interface number from the current altsettingAleksander Morgado2015-02-201-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Always read bInterfaceNumber from the current altsetting, not from the first one available in the altsetting array. This is coming from code review, not related to any specific bug. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: support setting rx coalescehayeswang2015-02-191-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | Support setting the rx coalesce. Then someone could change the rx agg timeout value through ethtool. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: change rx early size when the mtu is changedhayeswang2015-02-191-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | The rx early size is calculated with the mtu, so it has to be re-calculated when the mtu is changed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: separate USB_RX_EARLY_AGGhayeswang2015-02-191-26/+32
|/ / | | | | | | | | | | | | | | | | | | | | | | Separate USB_RX_EARLY_AGG into USB_RX_EARLY_TIMEOUT and USB_RX_EARLY_SIZE. Replace r8153_set_rx_agg() with r8153_set_rx_early_timeout() and r8153_set_rx_early_size(). Set the default timeout value according to the USB speed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: restore hw settingshayeswang2015-02-141-2/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a capability which let the hw could change the settings automatically when the power change to ON. However, the USB reset would reset the settings to the hw default, so the driver has to restore the relative settings. Otherwise, it would influence the functions of the hw, and the compatibility for the USB hub and USB host controller. The relative settings are as following. - set the power down scale to 96. - enable the power saving function of USB 2.0. - disable the ALDPS of ECM mode. - set burst mode depending on the burst size. - enable the flow control of endpoint full. - set fifo empty boundary to 32448 bytes. - enable the function of exiting LPM when Rx OK occurs. - set the connect timer to 1. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | hso: fix rx parsing logic when skb allocation failsAleksander Morgado2015-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If skb allocation fails once the IP header has been received, the rx state is being set to WAIT_SYNC. The logic, though, shouldn't directly return, as the buffer may contain a full packet, and therefore the WAIT_SYNC state needs to be processed (resetting state to WAIT_IP, clearing rx_buf_size and re-initializing rx_buf_missing). So, just let the while loop continue so that in the next iteration the WAIT_SYNC state cleanly stops the loop. The WAIT_SYNC processing will be done just after that, only if the end of packet is flagged. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: use BIT macrohayeswang2015-02-071-17/+17
| | | | | | | | | | | | | | Use BIT macro to replace (1 << bits). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: replace get_protocol with vlan_get_protocolhayeswang2015-02-071-14/+2
| | | | | | | | | | | | | | | | vlan_get_protocol() has been defined and use it to replace get_protocol(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: adjust the line feed for hw_featureshayeswang2015-02-071-2/+1
| | | | | | | | | | | | | | | | Keep NETIF_F_HW_VLAN_CTAG_RX and NETIF_F_HW_VLAN_CTAG_TX at the same line. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: check RTL8152_UNPLUG for rtl8152_closehayeswang2015-02-071-1/+1
| | | | | | | | | | | | | | It is unnecessary to accress the hw register if the device is unplugged. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: check linking status with netif_carrier_okhayeswang2015-02-071-14/+9
| | | | | | | | | | | | | | Replace (tp->speed & LINK_STATUS) with netif_carrier_ok(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: adjust lpm timerhayeswang2015-02-071-3/+3
| | | | | | | | | | | | | | | | Set LPM timer to 500us, except for RTL_VER_04 which doesn't link at USB 3.0. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: adjust rx_bottomhayeswang2015-02-071-2/+13
| | | | | | | | | | | | | | | | If a error occurs when submitting rx, skip the remaining submissions and try to submit them again next time. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | hso: Use static attribute groups for sysfs entryTakashi Iwai2015-02-051-7/+10
| | | | | | | | | | | | | | | | | | Pass the static attribute groups and the driver data via tty_port_register_device_attr() instead of manual device_create_file() and device_remove_file() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-02-052-51/+51
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: usb: sr9700: Use 'SR_' prefix for the common register macrosChen Gang2015-02-042-51/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commone register macors (e.g. RSR) is too commont to drivers, it may be conflict with the architectures (e.g. xtensa, sh). The related warnings (with allmodconfig under xtensa): CC [M] drivers/net/usb/sr9700.o In file included from drivers/net/usb/sr9700.c:24:0: drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined #define RSR 0x06 ^ In file included from ./arch/xtensa/include/asm/bitops.h:22:0, from include/linux/bitops.h:36, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/usb/sr9700.c:13: ./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition #define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v)); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: fix rfkill name conflictsOlivier Sobrie2015-02-011-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By using only the usb interface number for the rfkill name, we might have a name conflicts in case two similar hso devices are connected. In this patch, the name of the hso rfkill interface embed the value of a counter that is incremented each time a new rfkill interface is added. Suggested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: add missing cancel_work_sync in disconnect()Olivier Sobrie2015-02-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | For hso serial devices, two cancel_work_sync were missing in the disconnect method. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: update serial_table in usb disconnect methodOlivier Sobrie2015-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The serial_table is used to map the minor number of the usb serial device to its associated context. The table is updated in the probe method and in hso_serial_ref_free() which is called either from the tty cleanup method or from the usb disconnect method. This patch ensures that the serial_table is updated in the disconnect method and no more from the cleanup method to avoid the following potential race condition. - hso_disconnect() is called for usb interface "x". Because the serial port was open and because the cleanup method of the tty_port hasn't been called yet, hso_serial_ref_free() is not run. - hso_probe() is called and fails for a new hso serial usb interface "y". The function hso_free_interface() is called and iterates over the element of serial_table to find the device associated to the usb interface context. If the usb interface context of usb interface "y" has been created at the same place as for usb interface "x", then the cleanup functions are called for usb interfaces "x" and "y" and hso_serial_ref_free() is called for both interfaces. - release_tty() is called for serial port linked to usb interface "x" and possibly crash because the tty_port structure contained in the hso_device structure has been freed. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: move tty_unregister outside hso_serial_common_free()Olivier Sobrie2015-02-011-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function hso_serial_common_free() is called either by the cleanup method of the tty or by the usb disconnect method. In the former case, the usb_disconnect() has been already called and the sysfs group associated to the device has been removed. By calling tty_unregister directly from the usb_disconnect() method, we avoid a warning due to the removal of the sysfs group of the usb device. Example of warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 778 at fs/sysfs/group.c:225 sysfs_remove_group+0x50/0x94() sysfs group c0645a88 not found for kobject 'ttyHS5' Modules linked in: CPU: 0 PID: 778 Comm: kworker/0:3 Tainted: G W 3.18.0+ #105 Workqueue: events release_one_tty [<c000dfe4>] (unwind_backtrace) from [<c000c014>] (show_stack+0x14/0x1c) [<c000c014>] (show_stack) from [<c0016bac>] (warn_slowpath_common+0x5c/0x7c) [<c0016bac>] (warn_slowpath_common) from [<c0016c60>] (warn_slowpath_fmt+0x30/0x40) [<c0016c60>] (warn_slowpath_fmt) from [<c00ddd14>] (sysfs_remove_group+0x50/0x94) [<c00ddd14>] (sysfs_remove_group) from [<c0221e44>] (device_del+0x30/0x190) [<c0221e44>] (device_del) from [<c0221fb0>] (device_unregister+0xc/0x18) [<c0221fb0>] (device_unregister) from [<c0221fec>] (device_destroy+0x30/0x3c) [<c0221fec>] (device_destroy) from [<c01fe1dc>] (tty_unregister_device+0x2c/0x5c) [<c01fe1dc>] (tty_unregister_device) from [<c029a428>] (hso_serial_common_free+0x2c/0x88) [<c029a428>] (hso_serial_common_free) from [<c029a4c0>] (hso_serial_ref_free+0x3c/0xb8) [<c029a4c0>] (hso_serial_ref_free) from [<c01ff430>] (release_one_tty+0x30/0x84) [<c01ff430>] (release_one_tty) from [<c00271d4>] (process_one_work+0x21c/0x3c8) [<c00271d4>] (process_one_work) from [<c0027758>] (worker_thread+0x3d8/0x560) [<c0027758>] (worker_thread) from [<c002be4c>] (kthread+0xc0/0xcc) [<c002be4c>] (kthread) from [<c0009630>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa208 ]--- Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: replace reset_device work by usb_queue_reset_device()Olivier Sobrie2015-02-011-24/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need for a dedicated reset work in the hso driver since there is already a reset work foreseen in usb_interface that does the same. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: rename hso_dev into serial in hso_free_interface()Olivier Sobrie2015-02-011-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In other functions of the driver, variables of type "struct hso_serial" are denoted by "serial" and variables of type "struct hso_device" are denoted by "hso_dev". This patch makes the hso_free_interface() consistent with these notations. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: fix small indentation errorOlivier Sobrie2015-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | | Simply remove the useless extra tab. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: fix memory leak in hso_create_rfkill()Olivier Sobrie2015-02-011-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the rfkill interface was created, a buffer containing the name of the rfkill node was allocated. This buffer was never freed when the device disappears. To fix the problem, we put the name given to rfkill_alloc() in the hso_net structure. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: fix memory leak when device disconnectsOlivier Sobrie2015-02-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | In the disconnect path, tx_buffer should freed like tx_data to avoid a memory leak when the device disconnects. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: fix crash when device disappears while serial port is openOlivier Sobrie2015-02-011-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the device disappear, the function hso_disconnect() is called to perform cleanup. In the cleanup function, hso_free_interface() calls tty_port_tty_hangup() in view of scheduling a work to hang up the tty if needed. If the port was not open then hso_serial_ref_free() is called directly to cleanup everything. Otherwise, hso_serial_ref_free() is called when the last fd associated to the port is closed. For each open port, tty_release() will call the close method, hso_serial_close(), which drops the last kref and call hso_serial_ref_free() which unregisters, destroys the tty port and finally frees the structure in which the tty_port structure is included. Later, in tty_release(), more precisely when release_tty() is called, the tty_port previously freed is accessed to cancel the tty buf workqueue and it leads to a crash. In view of avoiding this crash, we add a cleanup method that is called at the end of the hangup process and we drop the last kref in this function when all the ports have been closed, when tty_port is no more needed and when it is safe to free the structure containing the tty_port structure. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | hso: remove useless header file timer.hOlivier Sobrie2015-02-011-1/+0
| | | | | | | | | | | | | | | | | | | | | No timer related function is used in this driver. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 01:56:14 +0000