summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rtlwifi/wifi.h
Commit message (Collapse)AuthorAgeFilesLines
* rtlwifi: rtl8192ee: Fix handling of new style descriptorsTroy Tan2015-02-061-0/+1
| | | | | | | | | | | | | | | | The hardware and firmware for the RTL8192EE utilize a FIFO list of descriptors. There were some problems with the initial implementation. The worst of these failed to detect that the FIFO was becoming full, which led to the device needing to be power cycled. As this condition is not relevant to most of the devices supported by rtlwifi, a callback routine was added to detect this situation. This patch implements the necessary changes in the pci handler, and the linkage into the appropriate rtl8192ee routine. Signed-off-by: Troy Tan <troy_tan@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V3.18] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: Unify variable naming for all driversLarry Finger2015-01-091-2/+0
| | | | | | | | | Some drivers refer to a particular quantity in the driver's private are by one name, while others use a different name. These differences are removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8821ae: Add VHT rate descriptorsLarry Finger2014-12-241-0/+21
| | | | | | | | | Device RTL8821AE is the first if the rtlwifi devices to implement 802.11ac capability. As a result, VHT rate descriptors are needed. In addition, the driver is converted to use the descriptors in rtlwifi. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: Convert all drivers to use a common set of rate descriptorsLarry Finger2014-12-241-36/+36
| | | | | | | This common set of rate descriptors is renamed to be DESC_RATExx. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmwareTroy Tan2014-12-241-2/+1
| | | | | | | | | The existing method for loading both normal and WOWLAN firmware for the device duplicates a lot of code. This solution is much cleaner. Signed-off-by: Troy Tan <troy_tan@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: Fix possible unaligned array in ether_addr_copy()Larry Finger2014-10-081-1/+1
| | | | | | | | | | | | Two macros used to copy BSSID information use ether_addr_copy(), thus the arrays must be 2-byte aligned. In one case, the array could become unaligned if the struct containing it were changed. Use the __unaligned(2) attribute to retain the necessary alignment. In addition, the magic number used to specify the size of the array is replaced by ETH_ALEN. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8188ee: rtl8192com: rtl8192cu: rtl8192ee: rtl8723ae: rtl87323be: ↵Larry Finger2014-09-301-1/+0
| | | | | | | | | | | | rtl8821ae: Use common cmd_send_packet A locking problem was found in routine _rtl92ee_cmd_send_packet() that led to system freezes. Upon inspection, several drivers had the same problem; however, the routines all used the same code. The common code has been moved into rtlwifi. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14Larry Finger2014-09-301-7/+1
| | | | | | | | | | | | | This patch updates the driver to match the latest Realtek release, and it is an important step in getting the internal code source at Realtek to match the code in the kernel. The primary reason for this is to make it easier for Realtek to maintain the kernel source without requiring an intermediate like me. In this process of merging the two source repositories, there are a lot of changes in both, and this commit is rather large. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8723ae: Update driver to match 06/28/14 Realtek versionLarry Finger2014-09-301-1/+18
| | | | | | | | | | | | | Not only does this patch update the driver to match the latest Realtek release, it is an important step in getting the internal code source at Realtek to match the code in the kernel. The primary reason for this is to make it easier for Realtek to maintain the kernel source without requiring an intermediate like me. In this process of merging the two source repositories, there are a lot of changes in both, and this commit is rather large. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8821ae: Move driver from staging to regular treeLarry Finger2014-09-261-5/+88
| | | | | | | | | | | | | | | | This driver was entered into staging a few cycles ago because there was not time to integrate the Realtek version into the support routines in the kernel. Now that there is an effort to converg the code base from Linux and the Realtek repo, it is time to move this driver. In addition, all the updates included in the 06/28/2014 version of the Realtek drivers are included here. With this change, it will be necessary to delete the staging driver. That will be handled in a separate patch. As it impacts the staging tree, such a patch is sent to a different destination. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8188ee: Update driver to match Realtek release of 06282014Larry Finger2014-09-261-1/+4
| | | | | | | | | | | | | Not only does this patch update the driver to match the latest Realtek release, it is an important step in getting the internal code source at Realtek to match the code in the kernel. The primary reason for this is to make it easier for Realtek to maintain the kernel source without requiring an intermediate like me. In this process of merging the two source repositories, there are a lot of changes in both, and this commit is rather large. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Finish modifying core routines for new driversLarry Finger2014-09-261-0/+5
| | | | | | | | Addition of the new drivers and the update to a new version for the others lead to changes in all the core routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Modify base.{c,h} for new driversLarry Finger2014-09-261-3/+17
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Modify core.c for new driversLarry Finger2014-09-261-0/+76
| | | | | | | | | Each of the routines in the rtlwifi common driver needs to be modified for the coming changes. This patch prepares core.c, but also touches other files. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl_pci: Start modification for new driversLarry Finger2014-09-261-1/+8
| | | | | | | | | | Future patches will move the drivers for RTL8192EE and RTL8821AE from staging to the regular wireless tree. Here, the necessary features are added to the PCI driver. Other files are touched due to changes in the various data structs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: btcoexist: Fix Smatch warningLarry Finger2014-09-261-1/+1
| | | | | | | | The capability for 802.11ac will soon be added to these drivers. Once that is done, a bitmask will be too large for the data storage. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: btcoexist: Update remaining old parts of the driverLarry Finger2014-09-091-3/+9
| | | | | | | | | This patch makes halbtcoutsrc.{c,h} work with the new pieces of the driver. Also included are some modifications to various header files. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: btcoexist: Modify rtl_btc for changes in latest Realtek codeLarry Finger2014-09-091-0/+3
| | | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: remove unused allow_all_destaddr functionsPeter Wu2014-05-191-2/+0
| | | | | | | | | | | Unused as configure_filter takes care of setting/clearing RCR_AAP. In commit "rtlwifi: rtl8723be: rtl8723com: Remove unused allow_all_destaddr functions", Larry Finger removed allow_all_destaddr from the struct. This commit removes the related function too. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: make MSI support a module parameterAdam Lee2014-05-131-0/+4
| | | | | | | | This makes MSI support a module parameter, for debugging and workaround convenience. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8723be: Fix smatch warningsLarry Finger2014-03-061-1/+1
| | | | | | | | | | | | | Smatch reports the following: drivers/net/wireless/rtlwifi/rtl8723be/fw.c:208 _rtl8723be_fill_h2c_command() warn: variable dereferenced before check 'rtlhal' (see line 69) drivers/net/wireless/rtlwifi/rtl8723be/hw.c:1732 _rtl8723be_read_adapter_info() error: __builtin_memcpy() '&rtlefuse->efuse_map[0][0]' too small (256 vs 512) The first one is fixed by removing two pointless tests for NULL pointers. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Move common routines to coreLarry Finger2014-03-061-0/+16
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: rtl8192se: rtl8723ae: rtl8723be: ↵Larry Finger2014-03-061-15/+186
| | | | | | | | | | | rtl8188eu: Modify for new API The addition of a driver for the RTL8821AE requires a new API for the fill_tx_desc() and set_desc() callback routines. This commit makes the appropriate modifications in all the other drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8723ae: rtl8723-common: Copy common firmware codeLarry Finger2014-03-041-0/+3
| | | | | | | | | The drivers for RTL8723AE and RTL8723BE have some code in common. This commit copies the common firmware routines into the shared code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Prepare existing drivers for new driverLarry Finger2014-03-041-93/+157
| | | | | | | | | A driver for the RTL8723BE will soon be added. This patch adds the necessary parts to the common headers, and modifies the existing drivers for those changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: btcoexist: Add new mini driverLarry Finger2014-03-041-0/+60
| | | | | | | | | | | A new driver in the rtlwifi family for the RTL8723BE will soon be added. The bluetooth coexistence code for this device has been split into a separate mini driver as it will be shared with other devices. This commit adds the the headers and sources, and modifies Kconfig and Makefile to configure and build this driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Redo register save locationsLarry Finger2013-12-051-16/+16
| | | | | | | | | | | The initial USB driver did not use some register save locations in the private data storage. To save some memory, a union was used to overlay these variables with USB I/O components. In an update of the gain-control code, these register save locations are now needed for USB drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192cu: Add new firmwareLarry Finger2013-12-051-0/+1
| | | | | | | | | | Vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404 introduced new firmware for these chips. The code try for the new file, and fall back to the original firmware if the new file is not available. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Fix endian error in extracting packet typeMark Cave-Ayland2013-11-111-5/+1
| | | | | | | | | | | | | | | | | | | All of the rtlwifi drivers have an error in the routine that tests if the data is "special". If it is, the subsequant transmission will be at the lowest rate to enhance reliability. The 16-bit quantity is big-endian, but was being extracted in native CPU mode. One of the effects of this bug is to inhibit association under some conditions as the TX rate is too high. Based on suggestions by Joe Perches, the entire routine is rewritten. One of the local headers contained duplicates of some of the ETH_P_XXX definitions. These are deleted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Stable <stable@vger.kernel.org> [2.6.38+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller2013-10-071-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h drivers/net/wireless/rtlwifi/rtl8188ee/phy.h drivers/net/wireless/rtlwifi/rtl8192ce/phy.h drivers/net/wireless/rtlwifi/rtl8192de/phy.h drivers/net/wireless/rtlwifi/rtl8723ae/phy.h Just some minor conflicts between the wireless-next changes and Joe Perches's "extern" removal from function prototypes in header files. John W. Linville says: ==================== Regarding the Bluetooth bits, Gustavo says: "The big work here is from Marcel and Johan. They did a lot of work in the L2CAP, HCI and MGMT layers. The most important ones are the addition of a new MGMT command to enable/disable LE advertisement and the introduction of the HCI user channel to allow applications to get directly and exclusive access to Bluetooth devices." As to the ath10k bits, Kalle says: "Bartosz dropped support for qca98xx hw1.0 hardware from ath10k, it's just too much to support it. Michal added support for the new firmware interface. Marek fixed WEP in AP and IBSS mode. Rest of the changes are minor fixes or cleanups." And also: "Major changes are: * throughput improvements including aligning the RX frames correctly and optimising HTT layer (Michal) * remove qca98xx hw1.0 support (Bartosz) * add support for firmware version 999.999.0.636 (Michal) * firmware htt statistics support (Kalle) * fix WEP in AP and IBSS mode (Marek) * fix a mutex unlock balance in debugfs file (Shafi) And of course there's a lot of smaller fixes and cleanup." For the wl12xx bits, Luca says: "Here are some patches intended for 3.13. Eliad is upstreaming a bunch of patches that have been pending in the internal tree. Mostly bugfixes and other small improvements." Along with that... Arend and friends bring us a batch of brcmfmac updates, Larry Finger offers some rtlwifi refactoring, and Sujith sends the usual batch of ath9k updates. As usual, there are a number of other small updates from a variety of players as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * rtlwifi: remove duplicate declarations and macros in headersCatalin Iacob2013-09-261-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch brings no functional change. There are still duplicate macros across the rtlwifi directory, for example IQK_DELAY_TIME is defined multiple times, sometimes with different values, this patch only removes duplicates within the same header file. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rtlwifi: Align private space in rtl_priv structLarry Finger2013-09-261-1/+1
|/ | | | | | | | | | | | | The private array at the end of the rtl_priv struct is not aligned. On ARM architecture, this causes an alignment trap and is fixed by aligning that array with __align(sizeof(void *)). That should properly align that space according to the requirements of all architectures. Reported-by: Jason Andrews <jasona@cadence.com> Tested-by: Jason Andrews <jasona@cadence.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192cu: Fix problem in connecting to WEP or WPA(1) networksLarry Finger2013-06-121-0/+4
| | | | | | | | | | Driver rtl8192cu can connect to WPA2 networks, but fails for any other encryption method. The cause is a failure to set the rate control data blocks. These changes fix https://bugzilla.redhat.com/show_bug.cgi?id=952793 and https://bugzilla.redhat.com/show_bug.cgi?id=761525. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8188ee: Enable recognition of RTL8188EELarry Finger2013-04-011-0/+1
| | | | | | | | | | | | | | These patches modify the common probe routine to recognize the RTL8188EE chip and implement asynchronous firmware reading in the callback routine to initialize the sw variables. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192c: rtl8192ce: rtl8192cu: rtl8192de: rtl8723ae: Add changes ↵Larry Finger2013-04-011-10/+91
| | | | | | | | | | | | | | | | required by adding rtl81988ee This patch combines the remaining changes in the rtlwifi family to handle the addition of rtl8188ee. A number of these changes eliminate some CamelCase variable names, and other shorten common variable names so that long lines in the new driver could be shortened. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queueLarry Finger2013-04-011-1/+2
| | | | | | | | | | | | | | | | | In commit a5ffbe0, some of the calls to rtl_lps_leave() were switched to be called from a work queue to avoid a scheduling while atomic bug. This patch converts the remaining calls to use the work queue. In addition, the call to rtl_lps_enter() is also switched to the work queue. None of these newly converted calls had triggered the bug (yet), but this change make all of them fit a single pattern. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8723ae: Update to vendor driver of 2013.02.07Larry Finger2013-04-011-1/+1
| | | | | | | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi Modify existing bits to match vendor version 2013.02.07Larry Finger2013-04-011-8/+108
| | | | | | | | | | | | | | | | | | | | | | | | | These changes add the new variables for P2P and modify the various struct definitions for other new features. This patch updates files base.{c,h} for the changes in the newest vendor driver. This patch updates files ps.{c,h} for the changes in the newest vendor driver. This patch updates files debug.{c,h}, efuse.c, pci.{c,h}, and wifi.h for the changes in the newest vendor driver. This patch updates files core.c, ps.c, rc.c, and wifi.h for the changes in the newest vendor driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: move sequence number arithmetic to ieee80211.hJohannes Berg2013-03-061-3/+0
| | | | | | | | | | | | Move the sequence number arithmetic code from mac80211 to ieee80211.h so others can use it. Also rename the functions from _seq to _sn, they operate on the sequence number, not the sequence_control field. Also move macros to convert the sequence control to/from the sequence number value from various drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rtlwifi: Fix many compile warnings when using W=1Larry Finger2013-02-011-1/+1
| | | | | | | | | | | | Many warnings like the following arise from a build with W=1 on the make line: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Changing the overall debug level storage from unsigned to signed fixes these. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192ce: rtl8192cu: rtl8192se: rtl81723ae: Turn on building of ↵Larry Finger2012-11-141-7/+101
| | | | | | | | | | | | | | the new driver This patch completes the addition of the new driver for the Realtek RTL8723AE devices by adding the make file and by modifying Kconfig and Makefile of rtlwifi. Some variable names were shortened to ease the problem of limiting all lines to 80 characters, thus changes were made to wifi.h and rtl8192{ce,cu,sw}/hw.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: <chaoming_li@realsil.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192c: rtl8192ce: rtl8192cu: rtl8192se: rtl8192de: Shorten some ↵Larry Finger2012-10-301-25/+28
| | | | | | | | | | | variable names The private data areas for these drivers contain some very long variable names that cause difficulty in fitting source lines to an 80-character limit. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Update header fileLarry Finger2012-09-071-1/+91
| | | | | | | | | The latest version of the vendor driver for the rtlwifi family includes many changes. This patch incorporates the difference in the main header file. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192c: rtl8192ce: rtl8192cu: rtl8192se: Remove sparse warningsLarry Finger2012-09-071-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rtlwifi family of drivers has the following sparse errors: CHECK drivers/net/wireless/rtlwifi/usb.c drivers/net/wireless/rtlwifi/usb.c:122:17: warning: cast to restricted __le32 CHECK drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:1157:13: warning: context imbalance in 'rtl92c_dm_refresh_rate_adaptive_mask' - different lock contexts for basic block CHECK drivers/net/wireless/rtlwifi/rtl8192ce/hw.c drivers/net/wireless/rtlwifi/rtl8192ce/hw.c:1909:30: warning: cast to restricted __le32 CHECK drivers/net/wireless/rtlwifi/rtl8192ce/sw.c drivers/net/wireless/rtlwifi/rtl8192ce/sw.c:345:1: warning: symbol 'rtl92ce_pci_ids' was not declared. Should it be static? CHECK drivers/net/wireless/rtlwifi/rtl8192cu/trx.c drivers/net/wireless/rtlwifi/rtl8192cu/trx.c:494:9: warning: cast from restricted __le16 CHECK drivers/net/wireless/rtlwifi/rtl8192se/fw.c drivers/net/wireless/rtlwifi/rtl8192se/fw.c:490:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:490:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:494:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:494:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:499:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:499:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:510:25: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:510:25: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:607:9: warning: cast to restricted __le16 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:607:9: warning: cast to restricted __le16 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:650:9: warning: cast to restricted __le16 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:650:9: warning: cast to restricted __le16 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:652:9: warning: cast to restricted __le16 drivers/net/wireless/rtlwifi/rtl8192se/fw.c:652:9: warning: cast to restricted __le16 CHECK drivers/net/wireless/rtlwifi/rtl8192se/trx.c drivers/net/wireless/rtlwifi/rtl8192se/trx.c:758:9: warning: cast from restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/trx.c:788:17: warning: cast from restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/trx.c:804:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/trx.c:804:17: warning: cast to restricted __le32 drivers/net/wireless/rtlwifi/rtl8192se/trx.c:807:17: warning: cast from restricted __le32 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192c: rtl8192de: Fix typo in cursta_connectctateLarry Finger2012-09-071-1/+1
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move TX station pointer and restructure TXThomas Huehn2012-07-311-4/+9
| | | | | | | | | | | | | | Remove the control.sta pointer from ieee80211_tx_info to free up sufficient space in the TX skb control buffer for the upcoming Transmit Power Control (TPC). Instead, the pointer is now on the stack in a new control struct that is passed as a function parameter to the drivers' tx method. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [reworded commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rtlwifi: rtl8192cu: Change buffer allocation for synchronous readsLarry Finger2012-07-121-0/+1
| | | | | | | | | | | | | | In commit a7959c1, the USB part of rtlwifi was switched to convert _usb_read_sync() to using a preallocated buffer rather than one that has been acquired using kmalloc. Although this routine is named as though it were synchronous, there seem to be simultaneous users, and the selection of the index to the data buffer is not multi-user safe. This situation is addressed by adding a new spinlock. The routine cannot sleep, thus a mutex is not allowed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Add dm structs to private structureLarry Finger2012-04-231-0/+4
| | | | | | | Add the dig_t and ps_t structures to the private variables. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Move dig_t and ps_t structsLarry Finger2012-04-231-0/+59
| | | | | | | | | | Move struct definitions for dig_t and ps_t to the common header file. This move is needed to convert these structures from a "per-driver" to a "per-interface" basis. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routineLarry Finger2012-04-091-1/+5
| | | | | | | | | | | | | | | | | The current version of rtlwifi for USB operations uses kmalloc to acquire a 32-bit buffer for each read of the device. When _usb_read_sync() is called with the rcu_lock held, the result is a "sleeping function called from invalid context" BUG. This is reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775. The first case has the lock originating from within rtlwifi and could be fixed by rearranging the locking; however, the second originates from within mac80211. The kmalloc() call is removed from _usb_read_sync() by creating a ring buffer pointer in the private area and allocating the buffer data in the probe routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [This version good for 3.3+ - different patch for 3.2 - 2.6.39] Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-25 17:28:48 +0000