summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
...
| | * | Partial revert "e1000e: Avoid receiver overrun interrupt bursts"Benjamin Poirier2018-03-051-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.html Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | e1000e: Remove Other from EIACBenjamin Poirier2018-03-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | net: usbnet: fix potential deadlock on 32bit hostsEric Dumazet2018-03-071-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marek reported a LOCKDEP issue occurring on 32bit host, that we tracked down to the fact that usbnet could either run from soft or hard irqs. This patch adds u64_stats_update_begin_irqsave() and u64_stats_update_end_irqrestore() helpers to solve this case. [ 17.768040] ================================ [ 17.772239] WARNING: inconsistent lock state [ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted [ 17.783329] -------------------------------- [ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>] asix_rx_fixup_internal+0x188/0x288 [ 17.806790] {IN-HARDIRQ-W} state was registered at: [ 17.811677] tx_complete+0x100/0x208 [ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0 [ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240 [ 17.824469] xhci_td_cleanup+0xf4/0x16c [ 17.828367] xhci_irq+0xe74/0x2240 [ 17.831827] usb_hcd_irq+0x24/0x38 [ 17.835343] __handle_irq_event_percpu+0x98/0x510 [ 17.840111] handle_irq_event_percpu+0x1c/0x58 [ 17.844623] handle_irq_event+0x38/0x5c [ 17.848519] handle_fasteoi_irq+0xa4/0x138 [ 17.852681] generic_handle_irq+0x18/0x28 [ 17.856760] __handle_domain_irq+0x6c/0xe4 [ 17.860941] gic_handle_irq+0x54/0xa0 [ 17.864666] __irq_svc+0x70/0xb0 [ 17.867964] arch_cpu_idle+0x20/0x3c [ 17.871578] arch_cpu_idle+0x20/0x3c [ 17.875190] do_idle+0x144/0x218 [ 17.878468] cpu_startup_entry+0x18/0x1c [ 17.882454] start_kernel+0x394/0x400 [ 17.886177] irq event stamp: 161912 [ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>] __netdev_alloc_skb+0xcc/0x140 [ 17.897893] hardirqs last disabled at (161911): [<d58261d0>] __netdev_alloc_skb+0x94/0x140 [ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout [ 17.906116] softirqs last enabled at (161904): [<387102ff>] irq_enter+0x78/0x80 [ 17.906123] softirqs last disabled at (161905): [<cf4c628e>] irq_exit+0x134/0x158 [ 17.925722]. [ 17.925722] other info that might help us debug this: [ 17.933435] Possible unsafe locking scenario: [ 17.933435]. [ 17.940331] CPU0 [ 17.942488] ---- [ 17.944894] lock(&syncp->seq#5); [ 17.948274] <Interrupt> [ 17.950847] lock(&syncp->seq#5); [ 17.954386]. [ 17.954386] *** DEADLOCK *** [ 17.954386]. [ 17.962422] no locks held by swapper/0/0. Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | fsl/fman: avoid sleeping in atomic context while adding an addressDenis Kirjanov2018-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __dev_mc_add grabs an adress spinlock so use atomic context in kmalloc. / # ifconfig eth0 inet 192.168.0.111 [ 89.331622] BUG: sleeping function called from invalid context at mm/slab.h:420 [ 89.339002] in_atomic(): 1, irqs_disabled(): 0, pid: 1035, name: ifconfig [ 89.345799] 2 locks held by ifconfig/1035: [ 89.349908] #0: (rtnl_mutex){+.+.}, at: [<(ptrval)>] devinet_ioctl+0xc0/0x8a0 [ 89.357258] #1: (_xmit_ETHER){+...}, at: [<(ptrval)>] __dev_mc_add+0x28/0x80 [ 89.364520] CPU: 1 PID: 1035 Comm: ifconfig Not tainted 4.16.0-rc3-dirty #8 [ 89.371464] Call Trace: [ 89.373908] [e959db60] [c066f948] dump_stack+0xa4/0xfc (unreliable) [ 89.380177] [e959db80] [c00671d8] ___might_sleep+0x248/0x280 [ 89.385833] [e959dba0] [c01aec34] kmem_cache_alloc_trace+0x174/0x320 [ 89.392179] [e959dbd0] [c04ab920] dtsec_add_hash_mac_address+0x130/0x240 [ 89.398874] [e959dc00] [c04a9d74] set_multi+0x174/0x1b0 [ 89.404093] [e959dc30] [c04afb68] dpaa_set_rx_mode+0x68/0xe0 [ 89.409745] [e959dc40] [c057baf8] __dev_mc_add+0x58/0x80 [ 89.415052] [e959dc60] [c060fd64] igmp_group_added+0x164/0x190 [ 89.420878] [e959dca0] [c060ffa8] ip_mc_inc_group+0x218/0x460 [ 89.426617] [e959dce0] [c06120fc] ip_mc_up+0x3c/0x190 [ 89.431662] [e959dd10] [c0607270] inetdev_event+0x250/0x620 [ 89.437227] [e959dd50] [c005f190] notifier_call_chain+0x80/0xf0 [ 89.443138] [e959dd80] [c0573a74] __dev_notify_flags+0x54/0xf0 [ 89.448964] [e959dda0] [c05743f8] dev_change_flags+0x48/0x60 [ 89.454615] [e959ddc0] [c0606744] devinet_ioctl+0x544/0x8a0 [ 89.460180] [e959de10] [c060987c] inet_ioctl+0x9c/0x1f0 [ 89.465400] [e959de80] [c05479a8] sock_ioctl+0x168/0x460 [ 89.470708] [e959ded0] [c01cf3ec] do_vfs_ioctl+0xac/0x8c0 [ 89.476099] [e959df20] [c01cfc40] SyS_ioctl+0x40/0xc0 [ 89.481147] [e959df40] [c0011318] ret_from_syscall+0x0/0x3c [ 89.486715] --- interrupt: c01 at 0x1006943c [ 89.486715] LR = 0x100c45ec Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ethernet: natsemi: correct spellingRandy Dunlap2018-03-063-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct spelling of National Semi-conductor (no hyphen) in drivers/net/ethernet/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: broadcom: Use strlcpy() for ethtool::get_stringsFlorian Fainelli2018-03-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 820ee17b8d3b ("net: phy: broadcom: Add support code for reading PHY counters") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: micrel: Use strlcpy() for ethtool::get_stringsFlorian Fainelli2018-03-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 2b2427d06426 ("phy: micrel: Add ethtool statistics counters") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: marvell: Use strlcpy() for ethtool::get_stringsFlorian Fainelli2018-03-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: d2fa47d9dd5c ("phy: marvell: Add ethtool statistics counters") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: dsa: b53: Use strlcpy() for ethtool::get_stringsFlorian Fainelli2018-03-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2018-03-101-1/+1
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull rdma fixes from Doug Ledford: - Various driver bug fixes in mlx5, mlx4, bnxt_re and qedr, ranging from bugs under load to bad error case handling - There in one largish patch fixing the locking in bnxt_re to avoid a machine hard lock situation - A few core bugs on error paths - A patch to reduce stack usage in the new CQ API - One mlx5 regression introduced in this merge window - There were new syzkaller scripts written for the RDMA subsystem and we are fixing issues found by the bot - One of the commits (aa0de36a40f4 “RDMA/mlx5: Fix integer overflow while resizing CQ”) is missing part of the commit log message and one of the SOB lines. The original patch was from Leon Romanovsky, and a cut-n-paste separator in the commit message confused patchworks which then put the end of message separator in the wrong place in the downloaded patch, and I didn’t notice in time. The patch made it into the official branch, and the only way to fix it in-place was to rebase. Given the pain that a rebase causes, and the fact that the patch has relevant tags for stable and syzkaller, a revert of the munged patch and a reapplication of the original patch with the log message intact was done. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits) RDMA/mlx5: Fix integer overflow while resizing CQ Revert "RDMA/mlx5: Fix integer overflow while resizing CQ" RDMA/ucma: Check that user doesn't overflow QP state RDMA/mlx5: Fix integer overflow while resizing CQ RDMA/ucma: Limit possible option size IB/core: Fix possible crash to access NULL netdev RDMA/bnxt_re: Avoid Hard lockup during error CQE processing RDMA/core: Reduce poll batch for direct cq polling IB/mlx5: Fix an error code in __mlx5_ib_modify_qp() IB/mlx5: When not in dual port RoCE mode, use provided port as native IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs RDMA/qedr: Fix iWARP write and send with immediate RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA RDMA/qedr: Fix iWARP connect with port mapper RDMA/qedr: Fix ipv6 destination address resolution IB/core : Add null pointer check in addr_resolve RDMA/bnxt_re: Fix the ib_reg failure cleanup RDMA/bnxt_re: Fix incorrect DB offset calculation RDMA/bnxt_re: Unconditionly fence non wire memory operations ...
| * | | {net, IB}/mlx5: Raise fatal IB event when sys error occursDaniel Jurgens2018-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All other mlx5_events report the port number as 1 based, which is how FW reports it in the port event EQE. Reporting 0 for this event causes mlx5_ib to not raise a fatal event notification to registered clients due to a seemingly invalid port. All switch cases in mlx5_ib_event that go through the port check are supposed to set the port now, so just do it once at variable declaration. Fixes: 89d44f0a6c73("net/mlx5_core: Add pci error handlers to mlx5_core driver") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2018-03-0520-143/+273
|\ \ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
| * | | hv_netvsc: propagate rx filters to VFStephen Hemminger2018-03-041-4/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The netvsc device should propagate filters to the SR-IOV VF device (if present). The flags also need to be propagated to the VF device as well. This only really matters on local Hyper-V since Azure does not support multiple addresses. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: filter multicast/broadcastStephen Hemminger2018-03-041-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The netvsc driver was always enabling all multicast and broadcast even if netdevice flag had not enabled it. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: defer queue selection to VFStephen Hemminger2018-03-041-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When VF is used for accelerated networking it will likely have more queues (and different policy) than the synthetic NIC. This patch defers the queue policy to the VF so that all the queues can be used. This impacts workloads like local generate UDP. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: use napi_schedule_irqoffStephen Hemminger2018-03-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the netvsc_channel_cb is already called in interrupt context from vmbus, there is no need to do irqsave/restore. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: fix race in napi poll when reschedulingStephen Hemminger2018-03-041-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race between napi_reschedule and re-enabling interrupts which could lead to missed host interrrupts. This occurs when interrupts are re-enabled (hv_end_read) and vmbus irq callback (netvsc_channel_cb) has already scheduled NAPI. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: cancel subchannel setup before halting deviceStephen Hemminger2018-03-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Block setup of multiple channels earlier in the teardown process. This avoids possible races between halt and subchannel initialization. Suggested-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: fix error unwind handling if vmbus_open failsStephen Hemminger2018-03-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to delete NAPI association if vmbus_open fails. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: only wake transmit queue if link is upStephen Hemminger2018-03-041-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't wake transmit queues if link is not up yet. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: avoid retry on send during shutdownStephen Hemminger2018-03-041-17/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the initialization order so that the device is ready to transmit (ie connect vsp is completed) before setting the internal reference to the device with RCU. This avoids any races on initialization and prevents retry issues on shutdown. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | virtio-net: re enable XDP_REDIRECT for mergeable bufferJason Wang2018-03-041-12/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XDP_REDIRECT support for mergeable buffer was removed since commit 7324f5399b06 ("virtio_net: disable XDP_REDIRECT in receive_mergeable() case"). This is because we don't reserve enough tailroom for struct skb_shared_info which breaks XDP assumption. So this patch fixes this by reserving enough tailroom and using fixed size of rx buffer. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ppp: prevent unregistered channels from connecting to PPP unitsGuillaume Nault2018-03-041-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed. In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel. However, it is possible for an unregistered channel to connect to a PPP unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT). Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list. Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism. This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | mlxsw: spectrum_switchdev: Check success of FDB add operationShalom Toledo2018-03-041-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, we assumed that in case of error when adding FDB entries, the write operation will fail, but this is not the case. Instead, we need to check that the number of entries reported in the response is equal to the number of entries specified in the request. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | spectrum: Reference count VLAN entriesIdo Schimmel2018-02-282-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the basic construct in the device is a port-VLAN pair, which can be bound to a FID or a RIF in order to direct packets to the bridge or the router, respectively. Since not all the netdevs are configured with a VLAN (e.g., sw1p1 vs. sw1p1.10), VID 1 is used to represent these and thus this VID can be used by both upper devices of mlxsw ports and by the driver itself. However, this VID is not reference counted and therefore might be freed prematurely, which can result in various WARNINGs. For example: $ ip link add name br0 type bridge vlan_filtering 1 $ teamd -t team0 -d -c '{"runner": {"name": "lacp"}}' $ ip link set dev team0 master br0 $ ip link set dev enp1s0np1 master team0 $ ip address add 192.0.2.1/24 dev enp1s0np1 The enslavement to team0 will fail because team0 already has an upper and thus vlan_vids_del_by_dev() will be executed as part of team's error path which will delete VID 1 from enp1s0np1 (added by br0 as PVID). The WARNING will be generated when the driver will realize it can't find VID 1 on the port and bind it to a RIF. Fix this by adding a reference count to the VLAN entries on the port, in a similar fashion to the reference counting used by the corresponding 'vlan_vid_info' structure in the 8021q driver. Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Reported-by: Tal Bar <talb@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Tal Bar <talb@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | mlxsw: spectrum: Treat IPv6 unregistered multicast as broadcastIdo Schimmel2018-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When multicast snooping is enabled, the Linux bridge resorts to flooding unregistered multicast packets to all ports only in case it did not detect a querier in the network. The above condition is not reflected to underlying drivers, which is especially problematic in IPv6 environments, as multicast snooping is enabled by default and since neighbour solicitation packets might be treated as unregistered multicast packets in case there is no corresponding MDB entry. Until the Linux bridge reflects its querier state to underlying drivers, simply treat unregistered multicast packets as broadcast and allow them to reach their destination. Fixes: 9df552ef3e21 ("mlxsw: spectrum: Improve IPv6 unregistered multicast flooding") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | mlxsw: spectrum: Fix handling of resource_size_paramJiri Pirko2018-02-281-37/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code uses global variables, adjusts them and passes pointer down to devlink. With every other mlxsw_core instance, the previously passed pointer values are rewritten. Fix this by de-globalize the variables and also memcpy size_params during devlink resource registration. Also, introduce a convenient size_param_init helper. Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | mlxsw: core: Fix flex keys scratchpad offset conflictJiri Pirko2018-02-281-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IP_TTL, IP_ECN and IP_DSCP are using the same offset within the scratchpad as L4 ports. Fix this by shifting all up. Fixes: 5f57e0909136 ("mlxsw: acl: Add ip ttl acl element") Fixes: i80d0fe4710c ("mlxsw: acl: Add ip tos acl element") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | virtio-net: disable NAPI only when enabled during XDP setJason Wang2018-02-281-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We try to disable NAPI to prevent a single XDP TX queue being used by multiple cpus. But we don't check if device is up (NAPI is enabled), this could result stall because of infinite wait in napi_disable(). Fixing this by checking device state through netif_running() before. Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | gianfar: Fix Rx byte accounting for ndev statsClaudiu Manoil2018-02-281-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't include in the Rx bytecount of the packet sent up the stack: the FCB (frame control block), and the padding bytes inserted by the controller into the frame payload, nor the FCS. All these are being pulled out of the skb by gfar_process_frame(). This issue is old, likely from the driver's beginnings, however it was amplified by recent: commit d903ec77118c ("gianfar: simplify FCS handling and fix memory leak") which basically added the FCS to the Rx bytecount, and so brought this to my attention. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWANBassem Boubaker2018-02-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Cinterion PL8 is an LTE modem with 2 possible WWAN interfaces. The modem is controlled via AT commands through the exposed TTYs. AT^SWWAN write command can be used to activate or deactivate a WWAN connection for a PDP context defined with AT+CGDCONT. UE supports two WWAN adapter. Both WWAN adapters can be activated a the same time Signed-off-by: Bassem Boubaker <bassem.boubaker@actia.fr> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sh_eth: uninline TSU register accessorsSergei Shtylyov2018-02-272-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have uninlined the sh_eth_{read|write}() functions introduced in the commit 4a55530f38e ("net: sh_eth: modify the definitions of register"). Now remove *inline* from sh_eth_tsu_{read|write}() as well and move these functions from the header to the driver itself. This saves 684 more bytes of object code (ARM gcc 4.8.5)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: Restore phy_resume() locking assumptionAndrew Lunn2018-02-272-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f5e64032a799 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: f5e64032a799 ("net: phy: fix resume handling") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | r8152: fix tx packets accountingEric Dumazet2018-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | r8152 driver handles TSO packets (limited to ~16KB) quite well, but pretends each TSO logical packet is a single packet on the wire. There is also some error since headers are accounted once, but error rate is small enough that we do not care. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hdlc_ppp: carrier detect ok, don't turn off negotiationDenis Du2018-02-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du <dudenis2000@yahoo.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | tuntap: correctly add the missing XDP flushJason Wang2018-02-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't flush batched XDP packets through xdp_do_flush_map(), this will cause packets stall at TX queue. Consider we don't do XDP on NAPI poll(), the only possible fix is to call xdp_do_flush_map() immediately after xdp_do_redirect(). Note, this in fact won't try to batch packets through devmap, we could address in the future. Reported-by: Christoffer Dall <christoffer.dall@linaro.org> Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | tuntap: disable preemption during XDP processingJason Wang2018-02-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Revert "tuntap: add missing xdp flush"Jason Wang2018-02-261-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 762c330d670e3d4b795cf7a8d761866fdd1eef49. The reason is we try to batch packets for devmap which causes calling xdp_do_flush() in the process context. Simply disabling preemption may not work since process may move among processors which lead xdp_do_flush() to miss some flushes on some processors. So simply revert the patch, a follow-up patch will add the xdp flush correctly. Reported-by: Christoffer Dall <christoffer.dall@linaro.org> Fixes: 762c330d670e ("tuntap: add missing xdp flush") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ixgbe: fix crash in build_skb Rx code pathEmil Tantilov2018-02-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91a214 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <stable@vger.kernel.org> Reported-by: Ambarish Soman <asoman@redhat.com> Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge tag 'for-linus-4.16a-rc4-tag' of ↵Linus Torvalds2018-03-021-1/+6
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Five minor fixes for Xen-specific drivers" * tag 'for-linus-4.16a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: 64-bit align flags x86/xen: add tty0 and hvc0 as preferred consoles for dom0 xen-netfront: Fix hang on device removal xen/pirq: fix error path cleanup when binding MSIs xen/pvcalls: fix null pointer dereference on map->sock
| * | | xen-netfront: Fix hang on device removalJason Andryuk2018-02-281-1/+6
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A toolstack may delete the vif frontend and backend xenstore entries while xen-netfront is in the removal code path. In that case, the checks for xenbus_read_driver_state would return XenbusStateUnknown, and xennet_remove would hang indefinitely. This hang prevents system shutdown. xennet_remove must be able to handle XenbusStateUnknown, and netback_changed must also wake up the wake_queue for that state as well. Fixes: 5b5971df3bc2 ("xen-netfront: remove warning when unloading module") Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Cc: Eduardo Otubo <otubo@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
* | | gianfar: simplify FCS handling and fix memory leakAndy Spencer2018-02-231-16/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer <aspencer@spacex.com> Signed-off-by: Jim Gruen <jgruen@spacex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | macvlan: fix use-after-free in macvlan_common_newlink()Alexey Kodanev2018-02-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following use-after-free was reported by KASan when running LTP macvtap01 test on 4.16-rc2: [10642.528443] BUG: KASAN: use-after-free in macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10642.626607] Read of size 8 at addr ffff880ba49f2100 by task ip/18450 ... [10642.963873] Call Trace: [10642.994352] dump_stack+0x5c/0x7c [10643.035325] print_address_description+0x75/0x290 [10643.092938] kasan_report+0x28d/0x390 [10643.137971] ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.207963] macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.275978] macvtap_newlink+0x171/0x260 [macvtap] [10643.334532] rtnl_newlink+0xd4f/0x1300 ... [10646.256176] Allocated by task 18450: [10646.299964] kasan_kmalloc+0xa6/0xd0 [10646.343746] kmem_cache_alloc_trace+0xf1/0x210 [10646.397826] macvlan_common_newlink+0x6de/0x14a0 [macvlan] [10646.464386] macvtap_newlink+0x171/0x260 [macvtap] [10646.522728] rtnl_newlink+0xd4f/0x1300 ... [10647.022028] Freed by task 18450: [10647.061549] __kasan_slab_free+0x138/0x180 [10647.111468] kfree+0x9e/0x1c0 [10647.147869] macvlan_port_destroy+0x3db/0x650 [macvlan] [10647.211411] rollback_registered_many+0x5b9/0xb10 [10647.268715] rollback_registered+0xd9/0x190 [10647.319675] register_netdevice+0x8eb/0xc70 [10647.370635] macvlan_common_newlink+0xe58/0x14a0 [macvlan] [10647.437195] macvtap_newlink+0x171/0x260 [macvtap] Commit d02fd6e7d293 ("macvlan: Fix one possible double free") handles the case when register_netdevice() invokes ndo_uninit() on error and as a result free the port. But 'macvlan_port_get_rtnl(dev))' check (returns dev->rx_handler_data), which was added by this commit in order to prevent double free, is not quite correct: * for macvlan it always returns NULL because 'lowerdev' is the one that was used to register rx handler (port) in macvlan_port_create() as well as to unregister it in macvlan_port_destroy(). * for macvtap it always returns a valid pointer because macvtap registers its own rx handler before macvlan_common_newlink(). Fixes: d02fd6e7d293 ("macvlan: Fix one possible double free") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: aquantia: Fix error handling in aq_pci_probe()Dan Carpenter2018-02-221-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | We should check "self->aq_hw" for allocation failure, and also we should free it on the error paths. Fixes: 23ee07ad3c2f ("net: aquantia: Cleanup pci functions module") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge tag 'mac80211-for-davem-2018-02-22' of ↵David S. Miller2018-02-221-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes across the tree, the shortlog basically says it all: cfg80211: fix cfg80211_beacon_dup -> old bug in this code cfg80211: clear wep keys after disconnection -> certain ways of disconnecting left the keys mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 -> alignment issues with using 14 bytes mac80211: Do not disconnect on invalid operating class -> if the AP has a bogus operating class, let it be mac80211: Fix sending ADDBA response for an ongoing session -> don't send the same frame twice cfg80211: use only 1Mbps for basic rates in mesh -> interop issue with old versions of our code mac80211_hwsim: don't use WQ_MEM_RECLAIM -> it causes splats because it flushes work on a non-reclaim WQ regulatory: add NUL to request alpha2 -> nla_put_string() issue from Kees mac80211: mesh: fix wrong mesh TTL offset calculation -> protocol issue mac80211: fix a possible leak of station stats -> error path might leak memory mac80211: fix calling sleeping function in atomic context -> percpu allocations need to be made with gfp flags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | mac80211_hwsim: don't use WQ_MEM_RECLAIMJohannes Berg2018-02-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're obviously not part of a memory reclaim path, so don't set the flag. This also causes a warning in check_flush_dependency() since we end up in a code path that flushes a non-reclaim workqueue, and we shouldn't do that if we were really part of reclaim. Reported-by: syzbot+41cdaf4232c50e658934@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | ibmvnic: Fix early release of login bufferThomas Falcon2018-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The login buffer is released before the driver can perform sanity checks between resources the driver requested and what firmware will provide. Don't release the login buffer until the sanity check is performed. Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net/smc9194: Remove bogus CONFIG_MAC referenceFinn Thain2018-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AFAIK the only version of smc9194.c with Mac support is the one in the linux-mac68k CVS repo, which never made it to the mainline. Despite that, from v2.3.45, arch/m68k/config.in listed CONFIG_SMC9194 under CONFIG_MAC. This mistake got carried over into Kconfig in v2.5.55. (See pre-git era "[PATCH] add m68k dependencies to net driver config".) Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | smsc75xx: fix smsc75xx_set_features()Eric Dumazet2018-02-221-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an attempt is made to disable RX checksums, USB adapter is changed but netdev->features is not, because smsc75xx_set_features() returns a non zero value. This throws errors from netdev_rx_csum_fault() : <devname>: hw csum failure Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | amd-xgbe: Restore PCI interrupt enablement setting on resumeTom Lendacky2018-02-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After resuming from suspend, the PCI device support must re-enable the interrupt setting so that interrupts are actually delivered. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-07 01:56:02 +0000