summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* bnx2x: fix handling mf storage modesDmitry Kravkov2012-10-162-4/+8
| | | | | | | | | | | Since commit a3348722 AFEX FCoE function is continuously reset. The patch prevents the resetting and removes debug print to stop garbaging syslog. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: fix bond/team enslave of vlan challenged slave/portJiri Pirko2012-10-161-1/+1
| | | | | | | | | | | In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley <jstanley@rmrf.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* mcs7830: Fix link state detectionOndrej Zary2012-10-121-9/+21
| | | | | | | | | | | | The device had an undocumented "feature": it can provide a sequence of spurious link-down status data even if the link is up all the time. A sequence of 10 was seen so update the link state only after the device reports the same link state 20 times. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reported-by: Michael Leun <lkml20120218@newton.leun.net> Tested-by: Michael Leun <lkml20120218@newton.leun.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: Support devices reporting idlenessOliver Neukum2012-10-112-0/+21
| | | | | | | | | Some device types support a form of power management in which the device suggests to the host that the device may be suspended now. Support for that is best located in usbnet. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ethernet/jme: disable ASPMKevin Baradon2012-10-111-0/+4
| | | | | | | | | | | | | | | Based on patch from Matthew Garrett <mjg@redhat.com> (https://lkml.org/lkml/2011/11/11/168). http://driveragent.com/archive/30421/7-0-14 indicates that ASPM is disabled on the 250 and 260. Duplicate for sanity. Fixes random RX engine hangs I experienced with JMC250 on Clevo W270HU. Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* kaweth: print correct debug ptrAlan Cox2012-10-111-1/+1
| | | | | | | | We nowdays copy the buffer and free fw->data, so make the debug printk use the right thing. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: Change wthresh to 1 to avoid possible Tx stallsHiroaki SHIMODA2012-10-102-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch originated from Hiroaki SHIMODA but has been modified by Intel with some minor cleanups and additional commit log text. Denys Fedoryshchenko and others reported Tx stalls on e1000e with BQL enabled. Issue was root caused to hardware delays. They were introduced because some of the e1000e hardware with transmit writeback bursting enabled, waits until the driver does an explict flush OR there are WTHRESH descriptors to write back. Sometimes the delays in question were on the order of seconds, causing visible lag for ssh sessions and unacceptable tx completion latency, especially for BQL enabled kernels. To avoid possible Tx stalls, change WTHRESH back to 1. The current plan is to investigate a method for re-enabling WTHRESH while not harming BQL, but those patches will be later for net-next if they work. please enqueue for stable since v3.3 as this bug was introduced in commit 3f0cfa3bc11e7f00c9994e0f469cbc0e7da7b00c Author: Tom Herbert <therbert@google.com> Date: Mon Nov 28 16:33:16 2011 +0000 e1000e: Support for byte queue limits Changes to e1000e to use byte queue limits. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> CC: eric.dumazet@gmail.com CC: therbert@google.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen: netback: handle compound page fragments on transmit.Ian Campbell2012-10-101-5/+35
| | | | | | | | | | | | | | | An SKB paged fragment can consist of a compound page with order > 0. However the netchannel protocol deals only in PAGE_SIZE frames. Handle this in netbk_gop_frag_copy and xen_netbk_count_skb_slots by iterating over the frames which make up the page. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: fix oops when give unknown ifindexstephen hemminger2012-10-101-6/+10
| | | | | | | | | If vxlan is created and the ifindex is passed; there are two cases which are incorrectly handled by the existing code. The ifindex could be zero (i.e. no device) or there could be no device with that ifindex. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: fix receive checksum handlingstephen hemminger2012-10-101-2/+1
| | | | | | | | | | Vxlan was trying to use postpull_rcsum to allow receive checksum offload to work on drivers using CHECKSUM_COMPLETE method. But this doesn't work correctly. Just force full receive checksum on received packet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: add additional headroomstephen hemminger2012-10-101-0/+1
| | | | | | | | Tell upper layer protocols to allocate skb with additional headroom. This avoids allocation and copy in local packet sends. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: allow configuring port rangestephen hemminger2012-10-101-5/+57
| | | | | | | | | | | | | | VXLAN bases source UDP port based on flow to help the receiver to be able to load balance based on outer header flow. This patch restricts the port range to the normal UDP local ports, and allows overriding via configuration. It also uses jhash of Ethernet header when looking at flows with out know L3 header. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: associate with tunnel socket on transmitstephen hemminger2012-10-101-0/+19
| | | | | | | | | When tunnelling a skb, associate it with the tunnel socket. This allows parameters set on tunnel socket (like multicast loop flag), to be picked up by ip_output. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: use ip_route_outputstephen hemminger2012-10-101-4/+8
| | | | | | | | Select source address for VXLAN packet based on route destination and don't lie to route code. VXLAN is not GRE. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: fix byte order in hash functionstephen hemminger2012-10-101-2/+2
| | | | | | | | Shift was wrong direction causing packets to hash based on other parts of the ethernet header, not the address. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: minor output refactoringstephen hemminger2012-10-101-11/+20
| | | | | | | Move code to find destination to a small function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'master-2012-10-08' of ↵David S. Miller2012-10-1016-92/+136
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is a batch of fixes intended for 3.7... Amitkumar Karwar provides a couple of mwifiex fixes to correctly report some reason codes for certain connection failures. He also provides a fix to cleanup after a scanning failure. Bing Zhao rounds that out with another mwifiex scanning fix. Daniel Golle gives us a fix for a copy/paste error in rt2x00. Felix Fietkau brings a couple of ath9k fixes related to suspend/resume, and a couple of fixes to prevent memory leaks in ath9k and mac80211. Ronald Wahl sends a carl9170 fix for a sleep in softirq context. Thomas Pedersen reorders some code to prevent drv_get_tsf from being called while holding a spinlock, now that it can sleep. Finally, Wei Yongjun prevents a NULL pointer dereference in the ath5k driver. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * carl9170: fix sleep in softirq contextRonald Wahl2012-10-082-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following bug: usb 1-1.1: restart device (8) BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:654 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper (usb_poison_urb+0x1c/0xf8) (usb_poison_anchored_urbs+0x48/0x78) (carl9170_usb_handle_tx_err+0x128/0x150) (carl9170_usb_reset+0xc/0x20) (carl9170_handle_command_response+0x298/0xea8) (carl9170_usb_tasklet+0x68/0x184) (tasklet_hi_action+0x84/0xdc) this only happens if the device is plugged in an USB port, the driver is loaded but inactive (e.g. the wlan interface is down). If the device is active everything is fine. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: fix potential NULL pointer dereference in ath5k_beacon_update()Wei Yongjun2012-10-081-1/+2
| | | | | | | | | | | | | | | | | | | | The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: update cfg80211 with correct reason code when connection is lostAmitkumar Karwar2012-10-084-16/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver gets LINK_LOST, DEAUTHENTICATED and DISASSOCIATED events from firmware when connection is lost in different scenarios. Currently we are using common code WLAN_REASON_DEAUTH_LEAVING for these cases. This patch adds support to parse an actual reason code from firmware event body and send it to cfg80211. WLAN_REASON_DEAUTH_LEAVING code is used if deauth is initiated by our device. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: update cfg80211 with correct reason code when association failsAmitkumar Karwar2012-10-082-5/+16
| | | | | | | | | | | | | | | | | | | | | | This patch adds support to send correct reason code got from firmware when association attempt fails. Also, the error message displayed for association failure due to network incompatibility is modified. Current message "cannot find ssid.." misleads user. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: reset scan_processing flag in failure casesAmitkumar Karwar2012-10-081-6/+10
| | | | | | | | | | | | | | | | | | | | scan_processing flag should be reset when scan request is failed due to some reasons Ex. memory allocation failure etc. Otherwise further scan requests will be blocked. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: return -EBUSY if scan request cannot be honoredBing Zhao2012-10-082-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | There are cases we cannot scan when request is received. For example, during WPA group key negociation the scan request will be blocked. We should return an error code to cfg80211 because cfg80211_scan_done will never be called. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00/rt3352: Fix lnagain assignment to use register 66.Daniel Golle2012-10-051-2/+2
| | | | | | | | | | | | | | | | | | | | This should be register 66 instead of 62. (probably happened by copy&past'ing from the lines below) Signed-off-by: Daniel Golle <dgolle@allnet.de> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: use ieee80211_free_txskbFelix Fietkau2012-10-053-26/+31
| | | | | | | | | | | | | | | | | | Using ieee80211_free_txskb for tx frames is required, since mac80211 clones skbs for which socket tx status is requested. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: improve suspend/resume reliabilityFelix Fietkau2012-10-054-10/+13
| | | | | | | | | | | | | | | | | | | | Ensure that drv_start() always returns true, as a failing hw start usually eventually leads to crashes when there's still a station entry present. Call a power-on reset after a resume and after a hw reset failure to bring the hardware back to life again. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix ASPM initialization on resumeFelix Fietkau2012-10-051-0/+5
| | | | | | | | | | | | | | | | ath_pci_aspm_init is only called on card init, so PCI registers get reset after a suspend/resume cycle. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | netdev/phy: Prototype of_mdio_find_bus()Mark Brown2012-10-091-0/+1
| | | | | | | | | | | | | | | | Ensure that of_mdio_find_bus() matches the prototype in the header (and stop sparse complaining) by including the header with the prototype. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | farsync: fix support for over 30 cardsDan Carpenter2012-10-091-1/+1
| | | | | | | | | | | | | | | | We're trying to fill a 64 bit bitmap but only the lower 30 shifts work because the shift wraps around. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: Remove code that stops further access to BE NIC based on UE bitsAjit Khaparde2012-10-091-2/+5
| | | | | | | | | | | | | | | | | | | | On certain platforms, BE hardware could falsely indicate UE. For BE family of NICs, do not set hw_error based on the UE bits. If there was a real fatal error, the corresponding h/w block will automatically go offline and stop traffic. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | pch_gbe: Fix build error by selecting all the possible dependencies.Haicheng Li2012-10-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fengguang reported a kernel build failure as following: drivers/built-in.o: In function `pch_gbe_ioctl': pch_gbe_main.c:(.text+0x510370): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x510393): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x5103b3): undefined reference to `pch_ch_control_write' ... It's a regression by commit da1586461. The root cause is that the CONFIG_PPS is not set there, consequently CONFIG_PTP_1588_CLOCK can not be set anyway, which finally causes ptp_pch and pch_gbe_main build failures. As David prefers to use *select* to fix such module co-dependency issues, this patch explicitly selects all the possible dependencies of PCH_PTP. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: David S. Miller <davem@davemloft.net> Signed-off-by: Haicheng Li <haicheng.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller2012-10-093-134/+448
|\ \ | | | | | | | | | | | | | | | | | | Pulled mainline in order to get the UAPI infrastructure already merged before I pull in David Howells's UAPI trees for networking. Signed-off-by: David S. Miller <davem@davemloft.net>
| * \ Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-10-092-134/+446
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ...
| | * \ Merge branch 'broadcom' of git://dev.phrozen.org/mips-next into ↵Ralf Baechle2012-09-271-29/+1
| | |\ \ | | | | | | | | | | | | | | | mips-for-linux-next
| | | * | MIPS: BCM63XX: Move DMA descriptor definition into common header fileKevin Cernekee2012-08-301-29/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "IUDMA" engine used by bcm63xx_enet is also used by other blocks, such as the USB 2.0 device. Move the definitions into a common file so that they do not need to be duplicated in each driver. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4082/ Signed-off-by: John Crispin <blogic@openwrt.org>
| | * | | netdev: octeon_mgmt: Make multi-line comment style consistent.David Daney2012-08-311-18/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No code changes. Recent patches have used the netdev style multi-line comment formatting, making the style inconsistent within octeon_mgmt.c Update the remaining comment blocks to achieve style harmony. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net>
| | * | | netdev: octeon_mgmt: Remove some useless 'inline'David Daney2012-08-311-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net>
| | * | | netdev: octeon_mgmt: Cleanup and modernize MAC address handling.David Daney2012-08-311-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use eth_mac_addr(), and generate a random address if none is otherwise assigned. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net>
| | * | | netdev: octeon_mgmt: Set the parent device.David Daney2012-08-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This establishes useful links in sysfs. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net>
| | * | | netdev: octeon_mgmt: Improve ethtool_ops.David Daney2012-08-311-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correctly show no link when the interface is down, and return -EOPNOTSUPP for things that don't work. This quiets the ethtool program when run on down interfaces. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net>
| | * | | netdev: octeon_mgmt: Add hardware timestamp support.Chad Reese2012-08-311-5/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Octeon cn6XXX models have timestamp support on the mgmt ports, so hook it up. Signed-off-by: Chad Reese <kreese@caviumnetworks.com> Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net>
| | * | | netdev: octeon_mgmt: Add support for 1Gig ports.David Daney2012-08-311-73/+255
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original hardware only supported 10M and 100M. Later versions added 1G support. Here we update the driver to make use of this. Also minor logic clean-ups for testing PHY registration error codes and TX complete high water marks. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net>
| * | | Merge tag 'rdma-for-linus' of ↵Linus Torvalds2012-10-071-0/+2
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband changes from Roland Dreier: "Second batch of changes for the 3.7 merge window: - Late-breaking fix for IPoIB on mlx4 SR-IOV VFs. - Fix for IPoIB build breakage with CONFIG_INFINIBAND_IPOIB_CM=n (new netlink config changes are to blame). - Make sure retry count values are in range in RDMA CM. - A few nes hardware driver fixes and cleanups. - Have iSER initiator use >1 interrupt vectors if available." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Check that retry count values are in range IB/iser: Add more RX CQs to scale out processing of SCSI responses RDMA/nes: Bump the version number of nes driver RDMA/nes: Remove unused module parameter "send_first" RDMA/nes: Remove unnecessary if-else statement RDMA/nes: Add missing break to switch. mlx4_core: Adjust flow steering attach wrapper so that IB works on SR-IOV VFs IPoIB: Fix build with CONFIG_INFINIBAND_IPOIB_CM=n
| | * | | mlx4_core: Adjust flow steering attach wrapper so that IB works on SR-IOV VFsJack Morgenstein2012-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the InfiniBand stack does not support flow steering at the verbs level -- the only usage of flow steering in the IB driver is for L2 multicast attaches. We need to add the IB case to procedure mlx4_QP_FLOW_STEERING_ATTACH_wrapper() to allow IPoIB to work on VFs on ConnectX-3 when flow steering is enabled. Currently, the IB case in mlx4_QP_FLOW_STEERING_ATTACH_wrapper() is missing, so the procedure returns -EINVAL and IPoIB on VFs breaks. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | | | | e1000e: add device IDs for i218Bruce Allan2012-10-092-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i218 is the next-generation LOM that will be available on systems with the Lynx Point LP Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support of those devices. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | | | ixgbe/ixgbevf: Limit maximum jumbo frame size to 9.5K to avoid Tx hangsAlexander Duyck2012-10-092-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change limits the PF/VF driver to 9.5K max jumbo frame size in order prevent a possible Tx hang in the adapter when sending frames between pools. All of the parts in ixgbe support a maximum frame of 15.5K for standard traffic, however with SR-IOV or DCB enabled they should be limiting the MTU size to 9.5K. Instead of adding extra checks which would have to change the MTU when we go into or out of these modes it is preferred to just use a standard 9.5K MTU limit for all modes so that this extra overhead can be avoided. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | | | ixgbevf: Set the netdev number of Tx queuesGreg Rose2012-10-091-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was not setting the number of real Tx queues in the net_device structure. This caused some serious issues such as Tx hangs and extremely poor performance with some usages of the driver. The issue is best observed by running: iperf -c <host> -P <n> Where n is greater than one. The greater the value of n the more likely the problem is to show up. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | | | net: fix typo in freescale/ucc_geth.cMichael Neuling2012-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch: acb600d net: remove skb recycling added dev_free_skb() to drivers/net/ethernet/freescale/ucc_geth.c This is a typo and should be dev_kfree_skb(). This fixes this. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | vxlan: fix more sparse warningsStephen Hemminger2012-10-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a couple harmless sparse warnings reported by Fengguang Wu. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | net: gro: selective flush of packetsEric Dumazet2012-10-082-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current GRO can hold packets in gro_list for almost unlimited time, in case napi->poll() handler consumes its budget over and over. In this case, napi_complete()/napi_gro_flush() are not called. Another problem is that gro_list is flushed in non friendly way : We scan the list and complete packets in the reverse order. (youngest packets first, oldest packets last) This defeats priorities that sender could have cooked. Since GRO currently only store TCP packets, we dont really notice the bug because of retransmits, but this behavior can add unexpected latencies, particularly on mice flows clamped by elephant flows. This patch makes sure no packet can stay more than 1 ms in queue, and only in stress situations. It also complete packets in the right order to minimize latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jesse Gross <jesse@nicira.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-22 10:12:13 +0000