summaryrefslogtreecommitdiffstats
path: root/drivers/opp
Commit message (Collapse)AuthorAgeFilesLines
* PM / OPP: Update voltage in case freq == old_freqWaldemar Rymarkiewicz2018-06-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes a rare but possible case when the clk rate is updated without update of the regulator voltage. At boot up, CPUfreq checks if the system is running at the right freq. This is a sanity check in case a bootloader set clk rate that is outside of freq table present with cpufreq core. In such cases system can be unstable so better to change it to a freq that is preset in freq-table. The CPUfreq takes next freq that is >= policy->cur and this is our target_freq that needs to be set now. dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the old_freq (a current rate). If these are equal it returns early. If not, it searches for OPP (old_opp) that fits best to old_freq (not listed in the table) and updates old_freq (!). Here, we can end up with old_freq = old_opp.rate = target_freq, which is not handled in _generic_set_opp_regulator(). It's supposed to update voltage only when freq > old_freq || freq > old_freq. if (freq > old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); [...] if (freq < old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) It results in, no voltage update while clk rate is updated. Example: freq-table = { 1000MHz 1.15V 666MHZ 1.10V 333MHz 1.05V } boot-up-freq = 800MHz # not listed in freq-table freq = target_freq = 1GHz old_freq = 800Mhz old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!) old_freq = 1GHz Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()") Cc: 4.6+ <stable@vger.kernel.org> # v4.6+ Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* treewide: kzalloc() -> kcalloc()Kees Cook2018-06-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* OPP: Allow same OPP table to be used for multiple genpdViresh Kumar2018-05-301-2/+15
| | | | | | | | | | | | | | | | | | | | | The OPP binding says: Property: operating-points-v2 ... This can contain more than one phandle for power domain providers that provide multiple power domains. That is, one phandle for each power domain. If only one phandle is available, then the same OPP table will be used for all power domains provided by the power domain provider. But the OPP core isn't allowing the same OPP table to be used for multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
* PM / OPP: Fix shared OPP table support in dev_pm_opp_register_set_opp_helper()Viresh Kumar2018-05-221-22/+5
| | | | | | | | | | | | | | | | | | | It should be fine to call dev_pm_opp_register_set_opp_helper() for all possible CPUs, even if some of them share the OPP table as the caller may not be aware of sharing policy. Lets increment the reference count of the OPP table and return its pointer. The caller need to call dev_pm_opp_register_put_opp_helper() the same number of times later on to drop all the references. To avoid adding another counter to count how many times dev_pm_opp_register_set_opp_helper() is called for the same OPP table, dev_pm_opp_register_put_opp_helper() frees the resources on the very first call made to it, assuming that the caller would be calling it sequentially for all the CPUs. We can revisit that if that assumption is broken in the future. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* PM / OPP: Fix shared OPP table support in dev_pm_opp_set_regulators()Viresh Kumar2018-05-221-9/+6
| | | | | | | | | | | | | | | | | | | It should be fine to call dev_pm_opp_set_regulators() for all possible CPUs, even if some of them share the OPP table as the caller may not be aware of sharing policy. Lets increment the reference count of the OPP table and return its pointer. The caller need to call dev_pm_opp_put_regulators() the same number of times later on to drop all the references. To avoid adding another counter to count how many times dev_pm_opp_set_regulators() is called for the same OPP table, dev_pm_opp_put_regulators() frees the resources on the very first call made to it, assuming that the caller would be calling it sequentially for all the CPUs. We can revisit that if that assumption is broken in the future. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* PM / OPP: Fix shared OPP table support in dev_pm_opp_set_prop_name()Viresh Kumar2018-05-221-20/+5
| | | | | | | | | | | | | | | | | | | It should be fine to call dev_pm_opp_set_prop_name() for all possible CPUs, even if some of them share the OPP table as the caller may not be aware of sharing policy. Lets increment the reference count of the OPP table and return its pointer. The caller need to call dev_pm_opp_put_prop_name() the same number of times later on to drop all the references. To avoid adding another counter to count how many times dev_pm_opp_set_prop_name() is called for the same OPP table, dev_pm_opp_put_prop_name() frees the resources on the very first call made to it, assuming that the caller would be calling it sequentially for all the CPUs. We can revisit that if that assumption is broken in the future. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* PM / OPP: Fix shared OPP table support in dev_pm_opp_set_supported_hw()Viresh Kumar2018-05-221-21/+5
| | | | | | | | | | | | | | | | | | | It should be fine to call dev_pm_opp_set_supported_hw() for all possible CPUs, even if some of them share the OPP table as the caller may not be aware of sharing policy. Lets increment the reference count of the OPP table and return its pointer. The caller need to call dev_pm_opp_put_supported_hw() the same number of times later on to drop all the references. To avoid adding another counter to count how many times dev_pm_opp_set_supported_hw() is called for the same OPP table, dev_pm_opp_put_supported_hw() frees the resources on the very first call made to it, assuming that the caller would be calling it sequentially for all the CPUs. We can revisit that if that assumption is broken in the future. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* PM / OPP: silence an uninitialized variable warningDan Carpenter2018-05-161-1/+1
| | | | | | | | | | Smatch complains that it's possible we print "rate" in the debug output when it hasn't been initialized. It should be zero on that path. Fixes: a1e8c13600bf ("PM / OPP: "opp-hz" is optional for power domains") [ Viresh: Added the Fixes tag ] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* PM / OPP: Remove dev_pm_opp_{un}register_get_pstate_helper()Viresh Kumar2018-05-092-77/+0
| | | | | | | These helpers aren't used anymore, remove them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* PM / OPP: Get performance state using genpd helperViresh Kumar2018-05-092-4/+19
| | | | | | | | The genpd core provides an API now to retrieve the performance state from DT, use that instead of the ->get_pstate() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* PM / OPP: Implement dev_pm_opp_get_of_node()Viresh Kumar2018-05-091-0/+19
| | | | | | | | | | | This adds a new helper to let the power domain drivers to access opp->np, so that they can read platform specific properties from the node. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* PM / OPP: Implement of_dev_pm_opp_find_required_opp()Viresh Kumar2018-05-093-3/+56
| | | | | | | | | | | A device's DT node or its OPP nodes can contain a phandle to other device's OPP node, in the "required-opps" property. This patch implements a routine to find that required OPP from the node that contains the "required-opps" property. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* PM / OPP: Implement dev_pm_opp_of_add_table_indexed()Viresh Kumar2018-05-091-9/+41
| | | | | | | | | | | The "operating-points-v2" property can contain a list of phandles now, specifically for the power domain providers that provide multiple domains. Add support to parse that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* PM / OPP: "opp-hz" is optional for power domainsViresh Kumar2018-05-094-47/+89
| | | | | | | | | | | | | | | | | | "opp-hz" property is optional for power domains now and we shouldn't error out if it is missing for power domains. This patch creates two new routines, _get_opp_count() and _opp_is_duplicate(), by separating existing code from their parent functions. Also skip duplicate OPP check for power domain OPPs as they may not have any the "opp-hz" field, but a platform specific performance state binding to uniquely identify OPP nodes. By default the debugfs OPP nodes are named using the "rate" value, but that isn't possible for the power domain OPP nodes and hence they use the index of the OPP node in the OPP node list instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* opp: cpu: Replace GFP_ATOMIC with GFP_KERNEL in dev_pm_opp_init_cpufreq_tableJia-Ju Bai2018-02-121-1/+1
| | | | | | | | | | | | | | | | After checking all possible call chains to dev_pm_opp_init_cpufreq_table() here, my tool finds that this function is never called in atomic context, namely never in an interrupt handler or holding a spinlock. And dev_pm_opp_init_cpufreq_table() calls dev_pm_opp_get_opp_count(), which calls mutex_lock that can sleep. It indicates that atmtcp_v_send() can call functions which may sleep. Thus GFP_ATOMIC is not necessary, and it can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* PM / OPP: Make local function ti_opp_supply_set_opp() staticWei Yongjun2017-12-281-1/+1
| | | | | | | | | | Fixes the following sparse warning: drivers/opp/ti-opp-supply.c:276:5: warning: symbol 'ti_opp_supply_set_opp' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Add ti-opp-supply driverDave Gerlach2017-12-172-0/+426
| | | | | | | | | | | | | | | | | Introduce a ti-opp-supply driver that will use new multiple regulator support that is part of the OPP core This is needed on TI platforms like DRA7/AM57 in order to control both CPU regulator and Adaptive Body Bias (ABB) regulator. These regulators must be scaled in sequence during an OPP transition depending on whether or not the frequency is being scaled up or down. This driver also implements AVS Class0 for these parts by looking up the required values from registers in the SoC and programming adjusted optimal voltage values for each OPP. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Add dev_pm_opp_{un}register_get_pstate_helper()Viresh Kumar2017-10-142-0/+80
| | | | | | | | | | | | | This adds the dev_pm_opp_{un}register_get_pstate_helper() helper routines which will be used to set the get_pstate() callback for a device. This callback will be later called internally by the OPP core to get performance state corresponding to an OPP. This is required temporarily until the time we have proper DT bindings to include the performance state information. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Support updating performance state of device's power domainViresh Kumar2017-10-143-1/+63
| | | | | | | | | | | | | | | | | | | The genpd framework now provides an API to request device's power domain to update its performance state. Use that interface from the OPP core for devices whose power domains support performance states. Note that this commit doesn't add any mechanism by which performance states are made available to the OPP core. That would be done by a later commit. Note that the current implementation is restricted to the case where the device doesn't have separate regulators for itself. We shouldn't over engineer the code before we have real use case for them. We can always come back and add more code to support such cases later on. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: add missing of_node_put() for of_get_cpu_node()Sudeep Holla2017-10-141-2/+3
| | | | | | | | | | | | | | | | | | | | | Commit 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) moved away from using cpu_dev->of_node because of some limitations. However, commit 7467c9d95989 (of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered) added support to fall back to of_get_cpu_node() if called if CPUs are not registered yet. Add the missing of_node_put() for the CPU device nodes. Also go back to using of_cpu_device_node_get() in dev_pm_opp_of_get_sharing_cpus() to avoid scanning the device tree again. Acked-by: Viresh Kumar <vireshk@kernel.org> Fixes: 762792913f8c (PM / OPP: Fix get sharing CPUs when hotplug is used) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Rename dev_pm_opp_register_put_opp_helper()Viresh Kumar2017-10-111-3/+3
| | | | | | | | | | | The routine is named incorrectly since the first attempt as there is nothing like a put_opp() helper. We wanted to unregister the set_opp() helper here and so it should rather be named as dev_pm_opp_unregister_set_opp_helper(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Add missing of_node_put(np)Tobias Jordan2017-10-111-0/+1
| | | | | | | | | | | | | The for_each_available_child_of_node() loop in _of_add_opp_table_v2() doesn't drop the reference to "np" on errors. Fix that. Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> [ VK: Improved commit log. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Move error message to debug levelFabio Estevam2017-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | On some i.MX6 platforms which do not have speed grading check, opp table will not be created in platform code, so cpufreq driver prints the following error message: cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19) However, this is not really an error in this case because the imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count() and if it fails, it means that platform code does not provide OPP and then dev_pm_opp_of_add_table() will be called. In order to avoid such confusing error message, move it to debug level. It is up to the caller of dev_pm_opp_get_opp_count() to check its return value and decide if it will print an error or not. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Use snprintf() to avoid kasprintf() and kfree()Arvind Yadav2017-10-111-4/+3
| | | | | | | | | | Use snprintf() to avoid unnecessary initializations, avoid calling kfree(). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / OPP: Move the OPP directory out of power/Viresh Kumar2017-10-037-0/+3104
The drivers/base/power/ directory is special and contains code related to power management core like system suspend/resume, hibernation, etc. It was fine to keep the OPP code inside it when we had just one file for it, but it is growing now and already has a directory for itself. Lets move it directly under drivers/ directory, just like cpufreq and cpuidle. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 15:21:25 +0000