summaryrefslogtreecommitdiffstats
path: root/drivers/opp
Commit message (Collapse)AuthorAgeFilesLines
* OPP: debugfs: Fix warning around icc_get_name()Viresh Kumar2024-03-111-2/+4
| | | | | | | | | | | | | | | | | If the kernel isn't built with interconnect support, icc_get_name() returns NULL and we get following warning: drivers/opp/debugfs.c: In function 'bw_name_read': drivers/opp/debugfs.c:43:42: error: '%.62s' directive argument is null [-Werror=format-overflow=] i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path)); Fix it. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/ Fixes: 0430b1d5704b0 ("opp: Expose bandwidth information via debugfs") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com>
* OPP: debugfs: Fix warning with W=1 buildsViresh Kumar2024-03-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | We currently get the following warning: debugfs.c:105:54: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=] snprintf(name, sizeof(name), "supply-%d", i); ^~ debugfs.c:105:46: note: directive argument in the range [-2147483644, 2147483646] snprintf(name, sizeof(name), "supply-%d", i); ^~~~~~~~~~~ debugfs.c:105:17: note: 'snprintf' output between 9 and 19 bytes into a destination of size 15 snprintf(name, sizeof(name), "supply-%d", i); Fix this and other potential issues it by allocating larger arrays. Use the exact string format to allocate the arrays without getting into these issues again. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com>
* OPP: Extend dev_pm_opp_data with turbo supportSibi Sankar2024-03-111-0/+1
| | | | | | | | Let's extend the dev_pm_opp_data with a turbo variable, to allow users to specify if it's a boost frequency for a dynamically added OPP. Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Rename 'rate_clk_single'Viresh Kumar2024-01-052-4/+4
| | | | | | The field's name isn't clear enough. Rename it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Pass rounded rate to _set_opp()Viresh Kumar2024-01-051-3/+3
| | | | | | | | | | | | | The OPP core finds the eventual frequency to set with the help of clk_round_rate() and the same was earlier getting passed to _set_opp() and that's what would get configured. The commit 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of frequency") mistakenly changed that. Fix it. Fixes: 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of frequency") Cc: v5.18+ <stable@vger.kernel.org> # v6.0+ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Relocate dev_pm_opp_sync_regulators()Viresh Kumar2024-01-051-41/+41
| | | | | | Move this to a more relevant place in the file. No functional changes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Move dev_pm_opp_icc_bw to internal opp.hViresh Kumar2024-01-031-0/+12
| | | | | | It isn't used by any driver or API, privatize it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Fix _set_required_opps when opp is NULLBryan O'Donoghue2023-12-281-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _set_required_opps can be called with opp NULL in _disable_opp_table(). commit e37440e7e2c2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs") requires the opp pointer to be non-NULL to function. [ 81.253439] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 81.438407] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 81.445296] Workqueue: pm pm_runtime_work [ 81.449446] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 81.456609] pc : _set_required_opps+0x178/0x28c [ 81.461288] lr : _set_required_opps+0x178/0x28c [ 81.465962] sp : ffff80008078bb00 [ 81.469375] x29: ffff80008078bb00 x28: ffffd1cd71bfe308 x27: 0000000000000000 [ 81.476730] x26: ffffd1cd70ebc578 x25: ffffd1cd70a08710 x24: 00000000ffffffff [ 81.484083] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff56ff892b3c48 [ 81.491435] x20: ffff56f1071c10 x19: 0000000000000000 x18: ffffffffffffffff [ 81.498788] x17: 2030207865646e69 x16: 2030303131207370 x15: 706f5f6465726975 [ 81.506141] x14: 7165725f7465735f x13: ffff5700f5c00000 x12: 00000000000008ac [ 81.513495] x11: 00000000000002e4 x10: ffff5700f6700000 x9 : ffff5700f5c00000 [ 81.520848] x8 : 00000000fffdffff x7 : ffff5700f6700000 x6 : 80000000fffe0000 [ 81.528200] x5 : ffff5700fef40d08 x4 : 0000000000000000 x3 : 0000000000000000 [ 81.535551] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff56ff81298f80 [ 81.542904] Call trace: [ 81.545437] _set_required_opps+0x178/0x28c [ 81.549754] _set_opp+0x3fc/0x5c0 [ 81.553181] dev_pm_opp_set_rate+0x90/0x26c [ 81.557498] core_power_v4+0x44/0x15c [venus_core] [ 81.562509] venus_runtime_suspend+0x40/0xd0 [venus_core] [ 81.568135] pm_generic_runtime_suspend+0x2c/0x44 [ 81.572983] __rpm_callback+0x48/0x1d8 [ 81.576852] rpm_callback+0x6c/0x78 [ 81.580453] rpm_suspend+0x10c/0x570 [ 81.584143] pm_runtime_work+0xc4/0xc8 [ 81.588011] process_one_work+0x138/0x244 [ 81.592153] worker_thread+0x320/0x438 [ 81.596021] kthread+0x110/0x114 [ 81.599355] ret_from_fork+0x10/0x20 [ 81.603052] Code: f10000ff fa5410e0 54fffbe1 97f05ae8 (f94026c5) [ 81.609317] ---[ end trace 0000000000000000 ]--- Fix it. Fixes: e37440e7e2c2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> [ Viresh: Implemented the fix differently ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
* OPP: The level field is always of unsigned int typeViresh Kumar2023-12-271-2/+7
| | | | | | | By mistake, dev_pm_opp_find_level_floor() used the level parameter as unsigned long instead of unsigned int. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Check for invalid OPP in dev_pm_opp_find_level_ceil()Viresh Kumar2023-11-281-0/+2
| | | | | | | | | _find_key_ceil() may return an error and that must be checked before passing the same to dev_pm_opp_put(). Fixes: 41907aa4ae37 ("OPP: Level zero is valid") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Don't set OPP recursively for a parent genpdViresh Kumar2023-11-282-3/+20
| | | | | | | | | | | | Like other frameworks (clk, regulator, etc.) genpd core too takes care of propagation to performance state to parent genpds. The OPP core shouldn't attempt the same, or it may result in undefined behavior. Add checks at various places to take care of the same. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Call dev_pm_opp_set_opp() for required OPPsViresh Kumar2023-11-283-98/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuring the required OPP was never properly implemented, we just took an exception for genpds and configured them directly, while leaving out all other required OPP types. Now that a standard call to dev_pm_opp_set_opp() takes care of configuring the opp->level too, the special handling for genpds can be avoided by simply calling dev_pm_opp_set_opp() for the required OPPs, which shall eventually configure the corresponding level for genpds. This also makes it possible for us to configure other type of required OPPs (no concrete users yet though), via the same path. This is how other frameworks take care of parent nodes, like clock, regulators, etc, where we recursively call the same helper. In order to call dev_pm_opp_set_opp() for the virtual genpd devices, they must share the OPP table of the genpd. Call _add_opp_dev() for them to get that done. This commit also extends the struct dev_pm_opp_config to pass required devices, for non-genpd cases, which can be used to call dev_pm_opp_set_opp() for the non-genpd required devices. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Use _set_opp_level() for single genpd caseViresh Kumar2023-11-282-5/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two genpd (as required-opp) cases that we need to handle, devices with a single genpd and ones with multiple genpds. The multiple genpds case is clear, where the OPP core calls dev_pm_domain_attach_by_name() for them and uses the virtual devices returned by this helper to call dev_pm_domain_set_performance_state() later to change the performance state. The single genpd case however requires special handling as we need to use the same `dev` structure (instead of a virtual one provided by genpd core) for setting the performance state via dev_pm_domain_set_performance_state(). As we move towards more generic code to take care of the required OPPs, where we will recursively call dev_pm_opp_set_opp() for all the required OPPs, the above special case becomes a problem. It doesn't make sense for a device's DT entry to have both "opp-level" and single "required-opps" entry pointing to a genpd's OPP, as that would make the OPP core call dev_pm_domain_set_performance_state() for two different values for the same device structure. And so we can reuse the 'opp->level" field in such a case and call _set_opp_level() for the device. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Level zero is validViresh Kumar2023-11-282-5/+27
| | | | | | | | | | | | | | | | The level zero can be used by some OPPs to drop performance state vote for the device. It is perfectly fine to allow the same. _set_opp_level() considers it as an invalid value currently and returns early. In order to support this properly, initialize the level field with U32_MAX, which denotes unused level field. Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* opp: ti: Use device_get_match_data()Rob Herring2023-11-231-10/+3
| | | | | | | | | | | | | Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. As this driver only does DT based matching, of_match_device() will never return NULL if we've gotten to probe(). Therefore, the NULL check and error return for it can be dropped. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: No need to defer probe from _opp_attach_genpd()Viresh Kumar2023-10-171-8/+0
| | | | | | | | | | When the new interface for attaching genpd's via the OPP core was added, it was possible for required_opp_count to be zero, but not anymore. Remove the unused check. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* OPP: Remove genpd_virt_dev_lockViresh Kumar2023-10-172-35/+6
| | | | | | | | | | | | | | | All the config operations for OPP tables share common code paths now and none of the other ones have such protection in place. Either all should have it or none. The understanding here is that user won't clear the OPP configs while still using them and so such a case won't happen. We can always come back and use a wider lock for all resource types if required. Also fix the error on failing to allocate memory. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* OPP: Reorder code in _opp_set_required_opps_genpd()Viresh Kumar2023-10-171-14/+18
| | | | | | | Reorder code in _opp_set_required_opps_genpd() to reduce duplicate code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* OPP: Add _link_required_opps() to avoid code duplicationViresh Kumar2023-10-161-33/+29
| | | | | | | | Factor out _link_required_opps() to remove duplicate code. No functional change. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* OPP: Fix formatting of if/else blockViresh Kumar2023-10-161-2/+2
| | | | | | | Add {} to both if else blocks or none. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* OPP: Fix -Wunsequenced in _of_add_opp_table_v1()Nathan Chancellor2023-10-061-2/+4
| | | | | | | | | | | | | | | | | | | | Clang warns (or errors with CONFIG_WERROR=y): drivers/opp/of.c:1081:28: error: multiple unsequenced modifications to 'val' [-Werror,-Wunsequenced] 1081 | .freq = be32_to_cpup(val++) * 1000, | ^ 1082 | .u_volt = be32_to_cpup(val++), | ~~ 1 error generated. There is no sequence point in a designated initializer. Move back to separate variables for the creation of the values, so that there are sequence points between each evaluation and increment of val. Fixes: 75bbc92c09d8 ("OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: debugfs: Fix warning with W=1 buildsViresh Kumar2023-10-061-1/+1
| | | | | | | | | | | | | | | | | | We currently get the following warning: debugfs.c: In function ‘opp_debug_create_one’: debugfs.c:63:42: warning: ‘%.1d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=] snprintf(name, sizeof(name), "icc-path-%.1d", i); ^~~~ debugfs.c:63:32: note: directive argument in the range [0, 2147483647] snprintf(name, sizeof(name), "icc-path-%.1d", i); ^~~~~~~~~~~~~~~ debugfs.c:63:3: note: ‘snprintf’ output between 11 and 20 bytes into a destination of size 11 snprintf(name, sizeof(name), "icc-path-%.1d", i); Fix it by increasing size of the `name` array. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Remove doc style comments for internal routinesViresh Kumar2023-10-061-72/+7
| | | | | | | | | | | | | | | | | | | | | | | | These were previously exposed outside of the OPP core and needed doc style commenting. They aren't public now and don't need the same. This fixes warnings generated for builds with `W=1`: core.c:2105: warning: Function parameter or member 'opp_table' not described in '_opp_set_supported_hw' core.c:2105: warning: Excess function parameter 'dev' description in '_opp_set_supported_hw' core.c:2148: warning: Function parameter or member 'opp_table' not described in '_opp_set_prop_name' core.c:2148: warning: Excess function parameter 'dev' description in '_opp_set_prop_name' core.c:2189: warning: Function parameter or member 'opp_table' not described in '_opp_set_regulators' core.c:2189: warning: Excess function parameter 'count' description in '_opp_set_regulators' core.c:2293: warning: Function parameter or member 'opp_table' not described in '_opp_set_clknames' core.c:2293: warning: Function parameter or member 'config_clks' not described in '_opp_set_clknames' core.c:2391: warning: Function parameter or member 'opp_table' not described in '_opp_set_config_regulators_helper' core.c:2455: warning: Function parameter or member 'opp_table' not described in '_opp_attach_genpd' core.c:2682: warning: Function parameter or member 'token' not described in 'dev_pm_opp_clear_config' core.c:2682: warning: Excess function parameter 'opp_table' description in 'dev_pm_opp_clear_config' Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309091558.x3JJrxFI-lkp@intel.com/ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Add dev_pm_opp_find_level_floor()Krishna chaitanya chundru2023-10-061-0/+25
| | | | | | | | | Add dev_pm_opp_find_level_floor(), as is done for frequency and bandwidth. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> [ Viresh: Updated commit log and rearranged code ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Extend support for the opp-level beyond required-oppsUlf Hansson2023-10-061-0/+35
| | | | | | | | | | | | | | | | At this point the level (performance state) for an OPP is currently limited to be requested for a device that is attached to a PM domain. Moreover, the device needs to have the so called required-opps assigned to it, which are based upon OPP tables being described in DT. To extend the support beyond required-opps and DT, let's enable the level to be set for all OPPs. More precisely, if the requested OPP has a valid level let's try to request it through the device's optional PM domain, via calling dev_pm_domain_set_performance_state(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ Viresh: Handle NULL opp in _set_opp_level() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Switch to use dev_pm_domain_set_performance_state()Ulf Hansson2023-10-061-1/+1
| | | | | | | | | | | To support performance scaling for any kinds of PM domains, let's move away from using the genpd specific API, dev_pm_genpd_set_performance_state(), to the common dev_pm_domain_set_performance_state(). No intended functional impact at this point. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Extend dev_pm_opp_data with a levelUlf Hansson2023-10-061-0/+1
| | | | | | | | | Let's extend the dev_pm_opp_data with a level variable, to allow users to specify a corresponding level (performance state) for a dynamically added OPP. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Add dev_pm_opp_add_dynamic() to allow more flexibilityUlf Hansson2023-10-063-17/+17
| | | | | | | | | | The dev_pm_opp_add() API is limited to add dynamic OPPs with a frequency and a voltage level. To enable more flexibility, let's add a new API, dev_pm_opp_add_dynamic() that's takes a struct dev_pm_opp_data* instead of a list of in-parameters. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Fix argument name in doc commentViresh Kumar2023-08-181-2/+2
| | | | | | | | | The name of the argument is "opp_table" and not "table", fix the comment. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308172310.FzcidE4c-lkp@intel.com/ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd()Manivannan Sadhasivam2023-07-241-1/+1
| | | | | | | | | | | | | | If dev_pm_domain_attach_by_name() returns NULL, then 0 will be passed to PTR_ERR() as reported by the smatch warning below: drivers/opp/core.c:2456 _opp_attach_genpd() warn: passing zero to 'PTR_ERR' Fix it by checking for the non-NULL virt_dev pointer before passing it to PTR_ERR. Otherwise return -ENODEV. Fixes: 4ea9496cbc95 ("opp: Fix error check in dev_pm_opp_attach_genpd()") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate()Manivannan Sadhasivam2023-07-241-5/+3
| | | | | | | | | | | | | | | "opp" pointer is dereferenced before the IS_ERR_OR_NULL() check. Fix it by removing the dereference to cache opp_table and dereference it directly where opp_table is used. This fixes the following smatch warning: drivers/opp/core.c:232 dev_pm_opp_get_required_pstate() warn: variable dereferenced before IS_ERR check 'opp' (see line 230) Fixes: 84cb7ff35fcf ("OPP: pstate is only valid for genpd OPP tables") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Reuse dev_pm_opp_get_freq_indexed()Viresh Kumar2023-07-241-21/+0
| | | | | | | Reuse dev_pm_opp_get_freq_indexed() from dev_pm_opp_get_freq(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* OPP: Update _read_freq() to return the correct frequencyViresh Kumar2023-07-241-1/+1
| | | | | | | | Now that we support finding indexed frequencies, lets update _read_freq() to return the right one. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* OPP: Add dev_pm_opp_find_freq_exact_indexed()Viresh Kumar2023-07-241-0/+28
| | | | | | | The indexed version of the API is added for other floor and ceil, add the same for exact as well for completeness. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Introduce dev_pm_opp_get_freq_indexed() APIManivannan Sadhasivam2023-07-241-0/+20
| | | | | | | | | | | In the case of devices with multiple clocks, drivers need to specify the frequency index for the OPP framework to get the specific frequency within the required OPP. So let's introduce the dev_pm_opp_get_freq_indexed() API accepting the frequency index as an argument. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [ Viresh: Fixed potential access to NULL opp pointer ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Introduce dev_pm_opp_find_freq_{ceil/floor}_indexed() APIsManivannan Sadhasivam2023-07-211-0/+56
| | | | | | | | | | | | | | In the case of devices with multiple clocks, drivers need to specify the clock index for the OPP framework to find the OPP corresponding to the floor/ceil of the supplied frequency. So let's introduce the two new APIs accepting the clock index as an argument. These APIs use the exising _find_key_ceil() helper by supplying the clock index to it. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [ Viresh: Rearranged definitions in pm_opp.h ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Properly propagate error along when failing to get icc_pathAndrew Halaney2023-06-271-1/+1
| | | | | | | | | | | | | | | | | fa155f4f8348 ("OPP: Use dev_err_probe() when failing to get icc_path") failed to actually use the error it was trying to log: smatch warnings: drivers/opp/of.c:516 dev_pm_opp_of_find_icc_paths() warn: passing zero to 'dev_err_probe' Make sure to use the right error and pass it along. Fixes: fa155f4f8348 ("OPP: Use dev_err_probe() when failing to get icc_path") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202306262008.guNLgjt6-lkp@intel.com/ Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Use dev_err_probe() when failing to get icc_pathAndrew Halaney2023-06-261-5/+1
| | | | | | | | | | | This, in tandem with dynamic debug, can print useful information about -EPROBE_DEFFER like below, and keeps similar behavior for other errors: [ 16.561072] cpu cpu0: error -EPROBE_DEFER: dev_pm_opp_of_find_icc_paths: Unable to get path0 [ 16.575777] platform 18591000.cpufreq: deferred probe pending Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: Simplify the over-designed pstate <-> level danceViresh Kumar2023-06-194-13/+5
| | | | | | | | | | | | | | | | | | | | | While adding support for "performance states" in the OPP and genpd core, it was decided to set the `pstate` field via genpd's pm_genpd_opp_to_performance_state() helper, to allow platforms to set `pstate` even if they don't have a corresponding `level` field in the DT OPP tables (More details are present in commit 6e41766a6a50 ("PM / Domain: Implement of_genpd_opp_to_performance_state()")). Revisiting that five years later clearly suggests that it was over-designed as all current users are eventually using the `level` value only. The previous commit already added necessary checks to make sure pstate is only used for genpd tables. Lets now simplify this a little, and use `level` directly and remove `pstate` field altogether. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* OPP: pstate is only valid for genpd OPP tablesViresh Kumar2023-06-193-3/+25
| | | | | | | | | | | | | It is not very clear right now that the `pstate` field is only valid for genpd OPP tables and not consumer tables. And there is no checking for the same at various places. Add checks in place to verify that and make it clear to the reader. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
* OPP: don't drop performance constraint on OPP table removalViresh Kumar2023-06-143-19/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code was added (long back) by commit 009acd196fc8 ("PM / OPP: Support updating performance state of device's power domain") and at that time the `opp->pstate` field was used to store the performance state required by a device's OPP. Over time that changed and the `->pstate` field is now used only for genpd devices and consumer devices access that via the required-opps instead. Because of all these changes, _opp_table_kref_release() now drops the constraint only when the genpd's OPP table gets freed and not the device's. Which is definitely not what we wanted. And dropping the constraint doesn't have much meaning as the genpd itself is going away. Moreover, if we want to drop constraints here, then just dropping the performance constraint alone isn't sufficient as there are other resource constraints like clk, regulator, etc. too, which must be handled. Probably the right thing to do here is to leave this decision to the consumers, which can call `dev_pm_opp_set_rate(dev, 0)` or similar APIs to drop all constraints properly. Which many of the consumers already do. Remove the special code, which is broken anyway. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* OPP: Protect `lazy_opp_tables` list with `opp_table_lock`Viresh Kumar2023-06-141-2/+12
| | | | | | | | | The `opp_table_lock` lock is already used to protect the list elsewhere, use it while adding or removing entries from it. Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
* OPP: Staticize `lazy_opp_tables` in of.cViresh Kumar2023-06-083-4/+4
| | | | | | | `lazy_opp_tables` is only used in of.c, move it there and mark it `static`. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* opp: Fix use-after-free in lazy_opp_tables after probe deferralStephan Gerhold2023-05-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When dev_pm_opp_of_find_icc_paths() in _allocate_opp_table() returns -EPROBE_DEFER, the opp_table is freed again, to wait until all the interconnect paths are available. However, if the OPP table is using required-opps then it may already have been added to the global lazy_opp_tables list. The error path does not remove the opp_table from the list again. This can cause crashes later when the provider of the required-opps is added, since we will iterate over OPP tables that have already been freed. E.g.: Unable to handle kernel NULL pointer dereference when read CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.4.0-rc3 PC is at _of_add_opp_table_v2 (include/linux/of.h:949 drivers/opp/of.c:98 drivers/opp/of.c:344 drivers/opp/of.c:404 drivers/opp/of.c:1032) -> lazy_link_required_opp_table() Fix this by calling _of_clear_opp_table() to remove the opp_table from the list and clear other allocated resources. While at it, also add the missing mutex_destroy() calls in the error path. Cc: stable@vger.kernel.org Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Fixes: 7eba0c7641b0 ("opp: Allow lazy-linking of required-opps") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* OPP: rate-limit debug messages when no change in OPP is requiredAdrián Larumbe2023-05-221-1/+1
| | | | | | | | | Otherwise, when enabling a debug build and dynamic debug in the kernel, it quickly floods the kernel ring buffer and makes debugging of other subsystems almost impossible, unless manually disabled. Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* Merge tag 'devicetree-for-6.4-2' of ↵Linus Torvalds2023-04-271-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: - First part of DT header detangling dropping cpu.h from of_device.h and replacing some includes with forward declarations. A handful of drivers needed some adjustment to their includes as a result. - Refactor of_device.h to be used by bus drivers rather than various device drivers. This moves non-bus related functions out of of_device.h. The end goal is for of_platform.h and of_device.h to stop including each other. - Refactor open coded parsing of "ranges" in some bus drivers to use DT address parsing functions - Add some new address parsing functions of_property_read_reg(), of_range_count(), and of_range_to_resource() in preparation to convert more open coded parsing of DT addresses to use them. - Treewide clean-ups to use of_property_read_bool() and of_property_present() as appropriate. The ones here are the ones that didn't get picked up elsewhere. * tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits) bus: tegra-gmi: Replace of_platform.h with explicit includes hte: Use of_property_present() for testing DT property presence w1: w1-gpio: Use of_property_read_bool() for boolean properties virt: fsl: Use of_property_present() for testing DT property presence soc: fsl: Use of_property_present() for testing DT property presence sbus: display7seg: Use of_property_read_bool() for boolean properties sparc: Use of_property_read_bool() for boolean properties sparc: Use of_property_present() for testing DT property presence bus: mvebu-mbus: Remove open coded "ranges" parsing of/address: Add of_property_read_reg() helper of/address: Add of_range_count() helper of/address: Add support for 3 address cell bus of/address: Add of_range_to_resource() helper of: unittest: Add bus address range parsing tests of: Drop cpu.h include from of_device.h OPP: Adjust includes to remove of_device.h irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h cpuidle: Adjust includes to remove of_device.h cpufreq: sun50i: Add explicit include for cpu.h cpufreq: Adjust includes to remove of_device.h ...
| * OPP: Adjust includes to remove of_device.hRob Herring2023-04-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just implicitly including other includes, and is no longer needed. Adjust the include files with what was implicitly included by of_device.h (cpu.h and of.h) and drop including of_device.h. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-18-581e2605fe47@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
* | OPP: Move required opps configuration to specialized callbackViresh Kumar2023-04-033-27/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The required-opps configuration is closely tied to genpd and performance states at the moment and it is not very obvious that required-opps can live without genpds. Though we don't support configuring required-opps for non-genpd cases currently. This commit aims at separating these parts, where configuring genpds would be a special case of configuring the required-opps. Add a specialized callback, set_required_opps(), to the opp table and set it to different callbacks accordingly. This shouldn't result in any functional changes for now. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* | OPP: Handle all genpd cases together in _set_required_opps()Viresh Kumar2023-04-031-7/+2
| | | | | | | | | | | | | | | | There is no real need of keeping separate code for single genpd case, it can be made to work with a simple change. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
* | opp: Use of_property_present() for testing DT property presenceRob Herring2023-03-131-2/+2
|/ | | | | | | | | | | | It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 20:00:12 +0000