summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller/dwc
Commit message (Collapse)AuthorAgeFilesLines
...
| * PCI: tegra: Add Tegra194 PCIe supportVidya Sagar2019-09-084-1/+1653
| | | | | | | | | | | | | | | | | | Add support for Synopsys DesignWare core IP based PCIe host controller present in the Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
| * PCI: dwc: Add support to enable CDM register checkVidya Sagar2019-08-132-0/+16
| | | | | | | | | | | | | | | | | | | | | | Add support to enable CDM (Configuration Dependent Module) register check for any data corruption based on the DT property 'snps,enable-cdm-check'. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
| * PCI: dwc: Export dw_pcie_wait_for_link() APIVidya Sagar2019-08-131-0/+1
| | | | | | | | | | | | | | | | Export the dw_pcie_wait_for_link() function to be able to build drivers using it as loadable modules. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * PCI: dwc: Add extended configuration space capability search APIVidya Sagar2019-08-132-0/+42
| | | | | | | | | | | | | | | | | | | | Add extended configuration space capability search API using struct dw_pcie* pointer. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Acked-by: Thierry Reding <treding@nvidia.com>
| * PCI: dwc: Move config space capability search APIVidya Sagar2019-08-133-35/+43
| | | | | | | | | | | | | | | | | | | | Move PCIe config space capability search API to common DesignWare file as this can be used by both host and EP mode drivers. Signed-off-by: Vidya Sagar <vidyaos@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
| * PCI: dwc: Group DBI registers writes requiring unlockingVidya Sagar2019-08-131-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of DesignWare core's DBI registers (a.k.a configuration space registers) are write-protected with a lock without enabling which they are read-only by default. These write-protected registers are implementation specific. Tegra194's BAR-0 register which is at offset 0x10 in the configuration space is an example. Current implementation in dw_pcie_setup_rc() API attempts to unlock those write-protected registers whenever they are updated and lock them back again for writing. Group all write-protected registers writes so that locking and unlocking is performed once to avoid bloating the code with multiple unlock/lock sequences for all those write-protected registers. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
* | Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas2019-09-234-9/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Propagate regulator_get_optional() errors so callers can distinguish real errors from optional regulators that are absent (Thierry Reding) - Propagate devm_of_phy_get() errors so callers can distinguish real errors from optional PHYs that are absent (Thierry Reding) - Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi) * remotes/lorenzo/pci/misc: MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: iproc: Propagate errors for optional PHYs PCI: histb: Propagate errors for optional regulators PCI: armada8x: Propagate errors for optional PHYs PCI: imx6: Propagate errors for optional regulators PCI: exynos: Propagate errors for optional PHYs PCI: rockchip: Propagate errors for optional regulators
| * | PCI: histb: Propagate errors for optional regulatorsThierry Reding2019-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org>
| * | PCI: armada8x: Propagate errors for optional PHYsThierry Reding2019-09-041-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_of_phy_get_by_index() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get_by_index() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
| * | PCI: imx6: Propagate errors for optional regulatorsThierry Reding2019-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: kernel@pengutronix.de Cc: linux-imx@nxp.com
| * | PCI: exynos: Propagate errors for optional PHYsThierry Reding2019-09-041-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_of_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org>
* | Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas2019-09-233-3/+21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei Bao) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver
| * | PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separatelyXiaowei Bao2019-08-142-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_PCI_LAYERSCAPE_EP so that endpoint and host controller drivers can be built separately. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driverXiaowei Bao2019-08-141-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | The layerscape PCIe controller have 4 BARs. BAR0 and BAR1 are 32bit, BAR2 and BAR4 are 64bit and that's a fixed hardware configuration. Set the bar_fixed_64bit variable accordingly. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
* | Merge branch 'remotes/lorenzo/pci/imx'Bjorn Helgaas2019-09-231-0/+33
|\ \ | | | | | | | | | | | | | | | | | | | | | - Reduce i.MX 6Quad DBI register length to avoid aborts from accessing invalid registers (Stefan Agner) * remotes/lorenzo/pci/imx: PCI: imx6: Limit DBI register length
| * | PCI: imx6: Limit DBI register lengthStefan Agner2019-08-151-0/+33
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the length of the DBI registers and limit config space to its length. This makes sure that the kernel does not access registers beyond that point, avoiding the following abort on a i.MX 6Quad: # cat /sys/devices/soc0/soc/1ffc000.pcie/pci0000\:00/0000\:00\:00.0/config [ 100.021433] Unhandled fault: imprecise external abort (0x1406) at 0xb6ea7000 ... [ 100.056423] PC is at dw_pcie_read+0x50/0x84 [ 100.060790] LR is at dw_pcie_rd_own_conf+0x44/0x48 ... Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
* | Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas2019-09-232-3/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Make kirin_dw_pcie_ops constant (Nishka Dasgupta) - Make DesignWare "num-lanes" property optional and remove from relevant DTs (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: arm64: dts: fsl: Remove num-lanes property from PCIe nodes ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes PCI: dwc: Return directly when num-lanes is not found dt-bindings: PCI: designware: Remove the num-lanes from Required properties PCI: kirin: Make structure kirin_dw_pcie_ops constant
| * | PCI: dwc: Return directly when num-lanes is not foundHou Zhiqiang2019-08-221-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The num-lanes is optional since it is not needed on some platforms that bring up the link in firmware. The link programming is based on the num-lanes properties (which is optional); if it is not present code must return instead of fiddling with the lanes value to print an error message. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
| * | PCI: kirin: Make structure kirin_dw_pcie_ops constantNishka Dasgupta2019-08-211-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Static variable kirin_dw_pcie_ops, of type dw_pcie_ops, is used only once, when it is assigned to the constant field ops of variable pci (having type dw_pcie) so kirin_dw_pcie_ops is never modified. Make it constant to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
* | PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron2019-09-162-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* | PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron2019-09-162-0/+377
|/ | | | | | | | | | | | | | | | | | | | This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
* Merge branch 'pci/trivial'Bjorn Helgaas2019-07-122-2/+2
|\ | | | | | | | | | | | | - Fix typos and whitespace errors (Bjorn Helgaas) * pci/trivial: PCI: Fix typos and whitespace errors
| * PCI: Fix typos and whitespace errorsBjorn Helgaas2019-07-092-2/+2
| | | | | | | | | | | | | | | | Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
* | Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas2019-07-121-61/+54
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Move qcom driver to bulk clock API (Bjorn Andersson) - Add Qualcomm QCS404 PCIe controller support (Bjorn Andersson) - Ensure Qualcomm PERST is asserted for at least 100ms (Niklas Cassel) * remotes/lorenzo/pci/qcom: PCI: qcom: Ensure that PERST is asserted for at least 100 ms PCI: qcom: Add QCS404 PCIe controller support dt-bindings: PCI: qcom: Add QCS404 to the binding PCI: qcom: Use clk bulk API for 2.4.0 controllers
| * | PCI: qcom: Ensure that PERST is asserted for at least 100 msNiklas Cassel2019-05-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there is only a 1 ms sleep after asserting PERST. Reading the datasheets for different endpoints, some require PERST to be asserted for 10 ms in order for the endpoint to perform a reset, others require it to be asserted for 50 ms. Several SoCs using this driver uses PCIe Mini Card, where we don't know what endpoint will be plugged in. The PCI Express Card Electromechanical Specification r2.0, section 2.2, "PERST# Signal" specifies: "On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from the power rails achieving specified operating limits." Add a sleep of 100 ms before deasserting PERST, in order to ensure that we are compliant with the spec. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5+
| * | PCI: qcom: Add QCS404 PCIe controller supportBjorn Andersson2019-05-291-26/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The QCS404 platform contains a PCIe version 2.4.0 controller and a Qualcomm PCIe2 PHY. The driver already supports version 2.4.0, for the IPQ4019, but this support touches clocks and resets related to the PHY as well and there's no upstream driver for the PHY. On QCS404 we must initialize the PHY, so a separate PHY driver is implemented to take care of this and the controller driver is updated to not require the PHY related resources. This is done by relying on the fact that operations in both the clock and reset framework are NOPs when passed NULL, so we can isolate this change to only the qcom_pcie_get_resources_2_4_0() function. For QCS404 we also need to enable the AHB (iface) clock, in order to access the register space of the controller, but as this is not part of the IPQ4019 DT binding this is only added for new users of the 2.4.0 controller. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
| * | PCI: qcom: Use clk bulk API for 2.4.0 controllersBjorn Andersson2019-05-291-37/+16
| |/ | | | | | | | | | | | | | | | | | | | | | | Before introducing the QCS404 platform, which uses the same PCIe controller as IPQ4019, migrate this to use the bulk clock API, in order to make the error paths slighly cleaner. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
* | Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas2019-07-125-35/+80
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add dwc API support to de-initialize host (Vidya Sagar) - Clean up dwc DBI,ATU read and write APIs (Vidya Sagar) - Export dwc APIs to support .remove() so drivers can be modular (Vidya Sagar) - Simplify imx6 Kconfig dependencies (Leonard Crestez) - Fix dra7xx build error when !CONFIG_GPIOLIB (YueHaibing) * remotes/lorenzo/pci/dwc: PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: imx6: Simplify Kconfig depends on PCI: dwc: Export APIs to support .remove() implementation PCI: dwc: Cleanup DBI,ATU read and write APIs PCI: dwc: Add API support to de-initialize host
| * | PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIBYueHaibing2019-07-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_GPIOLIB is not selected the compilation results in the following build errors: drivers/pci/controller/dwc/pci-dra7xx.c: In function dra7xx_pcie_probe: drivers/pci/controller/dwc/pci-dra7xx.c:777:10: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration] reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); drivers/pci/controller/dwc/pci-dra7xx.c:778:45: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’? reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Fix them by including the appropriate header file. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | PCI: imx6: Simplify Kconfig depends onLeonard Crestez2019-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The imx6 driver can be used on imx6sx without enabling support for imx6q or imx7d but the "depends on" condition doesn't allow that. Instead of making the condition even longer just make it depend on "ARCH_MXC || COMPILE_TEST" instead. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Lucas Stach <l.stach@pengutronix.de>
| * | PCI: dwc: Export APIs to support .remove() implementationVidya Sagar2019-06-272-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Export all configuration space access APIs and also other APIs to support host controller drivers of dwc core based implementations while adding support for .remove() hook to build their respective drivers as modules. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
| * | PCI: dwc: Cleanup DBI,ATU read and write APIsVidya Sagar2019-06-272-34/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanup DBI read and write APIs by removing leading "__" (underscore) from their names as there is no reason to have leading underscores in the first place in the function definition. Remove dbi/dbi2 base address parameters as the same behaviour can be obtained through read and write APIs. Since dw_pcie_{readl/writel}_dbi() APIs can't be used for ATU read/write as ATU base address could be different from DBI base address, implement ATU read/write APIs using ATU base address without using dw_pcie_{readl/writel}_dbi() APIs. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
| * | PCI: dwc: Add API support to de-initialize hostVidya Sagar2019-06-272-0/+13
| |/ | | | | | | | | | | | | | | | | | | Add an API to group all the tasks to be done to de-initialize host which can then be called by any dwc core based driver implementations while adding .remove() support in their respective drivers. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* / PCI: armada8k: Add PHYs supportMiquel Raynal2019-06-171-1/+81
|/ | | | | | | | | | | | | | | | Bring PHY support for the Armada8k driver. The Armada8k IP only supports x1, x2 or x4 link widths. Iterate over the DT 'phys' entries and configure them one by one. Use phy_set_mode_ext() to make use of the submode parameter (initially introduced for Ethernet modes). For PCI configuration, let the submode be the width (1, 2, 4, etc) so that the PHY driver knows how many lanes are bundled. Do not error out in case of error for compatibility reasons. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas2019-05-133-3/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Exit pcitest with error code when test fails (Jean-Jacques Hiblot) - Fix leaked of_node references in dra7xx, uniphier, layerscape, rockchip, aardvark, iproc, mediatek, rpadlpar (Wen Yang) - Fix pcitest "help" option parsing (Kishon Vijay Abraham I) - Fix Makefile bug that inadvertently removes pcitest.sh (Kishon Vijay Abraham I) - Check for alloc_workqueue() failure in endpoint test driver (Kangjie Lu) * remotes/lorenzo/pci/misc: PCI: endpoint: Fix a potential NULL pointer dereference tools: PCI: Handle pcitest.sh independently from pcitest tools: PCI: Add 'h' in optstring of getopt() PCI: mediatek: Fix a leaked reference by adding missing of_node_put() PCI: iproc: Fix a leaked reference by adding missing of_node_put() PCI: aardvark: Fix a leaked reference by adding missing of_node_put() PCI: rockchip: Fix a leaked reference by adding missing of_node_put() PCI: dwc: layerscape: Fix a leaked reference by adding missing of_node_put() PCI: uniphier: Fix a leaked reference by adding missing of_node_put() PCI: dwc: pci-dra7xx: Fix a leaked reference by adding missing of_node_put() tools: PCI: Exit with error code when test fails
| * PCI: dwc: layerscape: Fix a leaked reference by adding missing of_node_put()Wen Yang2019-04-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to of_parse_phandle() returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pci/controller/dwc/pci-layerscape.c:204:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 198, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Minghuan Lian <minghuan.Lian@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Roy Zang <roy.zang@nxp.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org
| * PCI: uniphier: Fix a leaked reference by adding missing of_node_put()Wen Yang2019-03-291-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to of_get_child_by_name() returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released. Detected by coccinelle with the following warnings: ./drivers/pci/controller/dwc/pcie-uniphier.c:283:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 274, but without a corresponding object release within this function. ./drivers/pci/controller/dwc/pcie-uniphier.c:290:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 274, but without a corresponding object release within this function. ./drivers/pci/controller/dwc/pcie-uniphier.c:296:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 274, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org
| * PCI: dwc: pci-dra7xx: Fix a leaked reference by adding missing of_node_put()Wen Yang2019-03-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released. Detected by coccinelle with the following warnings: ./drivers/pci/controller/dwc/pci-dra7xx.c:252:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 241, but without a corresponding object release within this function. ./drivers/pci/controller/dwc/pci-dra7xx.c:255:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 241, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-omap@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-kernel@vger.kernel.org
* | Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas2019-05-1310-353/+835
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Move IRQ register address computation inside macros (Kishon Vijay Abraham I) - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I) - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham I) - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon Vijay Abraham I) - Add dwc support for platforms with custom MSI controllers (Kishon Vijay Abraham I) - Add keystone-specific MSI controller (Kishon Vijay Abraham I) - Remove dwc host_ops previously used for keystone-specific MSI (Kishon Vijay Abraham I) - Skip dwc default MSI init if platform has custom MSI controller (Kishon Vijay Abraham I) - Implement .start_link() and .stop_link() for keystone endpoint support (Kishon Vijay Abraham I) - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I) - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon Vijay Abraham I) - Get keystone register resources from DT by name, not index (Kishon Vijay Abraham I) - Get DT resources in .probe() to prepare for endpoint support (Kishon Vijay Abraham I) - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration (Kishon Vijay Abraham I) - Explicitly set keystone to host mode (Kishon Vijay Abraham I) - Document DT "atu" reg-names requirement for DesignWare core >= 4.80 (Kishon Vijay Abraham I) - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon Vijay Abraham I) - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon Vijay Abraham I) - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham I) - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham I) - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I) - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I) - Make of_pci_get_max_link_speed() available to endpoint drivers as well as host drivers (Kishon Vijay Abraham I) - Add keystone support for DT "max-link-speed" property (Kishon Vijay Abraham I) - Add endpoint library support for BAR buffer alignment (Kishon Vijay Abraham I) - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I) - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay Abraham I) - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon Vijay Abraham I) - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay Abraham I) - Configure designware endpoints to advertise smallest resizable BAR (1MB) (Kishon Vijay Abraham I) - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay Abraham I) - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I) - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test misc: pci_endpoint_test: Add support to test PCI EP in AM654x PCI: designware-ep: Use aligned ATU window for raising MSI interrupts PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size PCI: keystone: Add support for PCIe EP in AM654x Platforms dt-bindings: PCI: Add PCI EP DT binding documentation for AM654 PCI: dwc: Add callbacks for accessing dbi2 address space PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops PCI: endpoint: Add support to specify alignment for buffers allocated to BARs PCI: keystone: Add support to set the max link speed from DT PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers PCI: keystone: Invoke phy_reset() API before enabling PHY PCI: keystone: Add support for PCIe RC in AM654x Platforms dt-bindings: PCI: Add PCI RC DT binding documentation for AM654 PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 PCI: dwc: Fix ATU identification for designware version >= 4.80 PCI: dwc: Enable iATU unroll for endpoint too dt-bindings: PCI: Document "atu" reg-names PCI: keystone: Explicitly set the PCIe mode dt-bindings: PCI: Add dt-binding to configure PCIe mode PCI: keystone: Move resources initialization to prepare for EP support PCI: keystone: Use platform_get_resource_byname() to get memory resources PCI: keystone: Perform host initialization in a single function dt-bindings: PCI: keystone: Add "reg-names" binding information PCI: keystone: Cleanup error_irq configuration PCI: keystone: Add start_link()/stop_link() dw_pcie_ops PCI: dwc: Remove default MSI initialization for platform specific MSI chips PCI: dwc: Remove Keystone specific dw_pcie_host_ops PCI: keystone: Use Keystone specific msi_irq_chip PCI: dwc: Add support to use non default msi_irq_chip PCI: keystone: Cleanup ks_pcie_msi_irq_handler() PCI: keystone: Use hwirq to get the MSI IRQ number offset PCI: keystone: Add separate functions for configuring MSI and legacy interrupt PCI: keystone: Cleanup interrupt related macros # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h
| * | PCI: designware-ep: Use aligned ATU window for raising MSI interruptsKishon Vijay Abraham I2019-05-011-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain platforms like K2G reguires the outbound ATU window to be aligned. The alignment size is already present in mem->page_size. Use the alignment size present in mem->page_size to configure an aligned ATU window. In order to raise an interrupt, CPU has to write to address offset from the start of the window unlike before where writes were always to the beginning of the ATU window. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest sizeKishon Vijay Abraham I2019-05-011-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configure the Resizable BAR capability to advertise the smallest size (1MB) for a couple of reasons: - Host side resource allocation of BAR fails for larger sizes - Endpoint function driver does not allocate memory for all supported sizes in the Resizable BAR capability. If and when there is a usecase required to add more flexibility using the Resizable BAR capability, this can be revisited. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: keystone: Add support for PCIe EP in AM654x PlatformsKishon Vijay Abraham I2019-05-012-37/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add PCIe EP support for AM654x Platforms in pci-keystone.c Link: https://lore.kernel.org/linux-pci/20190325093947.32633-15-kishon@ti.com/ Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> [lorenzo.pieralisi@arm.com: made dev_vdbg() call a comment] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: dwc: Add callbacks for accessing dbi2 address spaceKishon Vijay Abraham I2019-04-162-2/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain platforms like TI's AM654 do not have aseparate address space for dbi2 instead they are accessed using the same address space as dbi with some configuration bit set. In order to support such platforms, add callbacks for accessing dbi2 address space. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offsetKishon Vijay Abraham I2019-04-161-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") while adding MSI-X callback handler, introduced dw_pcie_ep_find_capability() and __dw_pcie_ep_find_next_cap() for finding the MSI and MSIX capability. However if MSI or MSIX capability is the last capability (i.e there are no additional items in the capabilities list and the Next Capability Pointer is set to '0'), __dw_pcie_ep_find_next_cap will return '0' even though MSI or MSIX capability may be present because of incorrect ordering of the "next_cap_ptr" check. Fix it. Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: dwc: Add const qualifier to struct dw_pcie_ep_opsKishon Vijay Abraham I2019-04-155-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Add const qualifier to struct dw_pcie_ep_ops member of struct dw_pcie_ep. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: keystone: Add support to set the max link speed from DTKishon Vijay Abraham I2019-04-151-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCIe in TI's AM654 devices is by default configured to work in GEN3 mode. However PCIe does not work reliably in GEN3 mode because of SERDES configuration. Add support to set the link speed to GEN1, GEN2 or GEN3 based on "max-link-speed" DT property with GEN2 as the default speed if "max-link-speed" is absent. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: keystone: Invoke phy_reset() API before enabling PHYKishon Vijay Abraham I2019-04-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SERDES connected to the PCIe controller in AM654 requires power on reset enable (POR_EN) to be set in the SERDES. The SERDES driver sets POR_EN in the reset ops and it has to be invoked before init or enable ops. In order for SERDES driver to set POR_EN, invoke the phy_reset() API in pci-keystone driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: keystone: Add support for PCIe RC in AM654x PlatformsKishon Vijay Abraham I2019-04-152-15/+148
| | | | | | | | | | | | | | | | | | | | | Add PCIe RC support for AM654x Platforms in pci-keystone.c Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64Kishon Vijay Abraham I2019-04-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hook_fault_code() is an ARM32 specific API for hooking into data abort. AM65X platforms (that integrate ARM v8 cores and select CONFIG_ARM64 as arch) rely on pci-keystone.c but on them the enumeration of a non-present BDF does not trigger a bus error, so the fixup exception provided by calling hook_fault_code() is not needed and can be guarded with CONFIG_ARM. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
| * | PCI: dwc: Fix ATU identification for designware version >= 4.80Kishon Vijay Abraham I2019-04-152-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Synopsys designware version >= 4.80 uses a separate register space for programming ATU. The current code identifies if there exists a separate register space by accessing the register address of ATUs in designware version < 4.80. Accessing this address results in abort in the case of K2G. Fix it here by adding "version" member to struct dw_pcie. This should be set by platform specific drivers and designware core will use it to identify if the platform has a separate ATU space. For platforms which have not populated the version member, the old method of identification will still be used. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-05-07 00:18:19 +0000