summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci-sysfs.c
Commit message (Collapse)AuthorAgeFilesLines
* PCI: revise VPD access interfaceStephen Hemminger2009-01-071-30/+8
| | | | | | | | | | | Change PCI VPD API which was only used by sysfs to something usable in drivers. * move iteration over multiple words to the low level * use conventional types for arguments * add exportable wrapper Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: define PCI resource names in an 'enum'Yu Zhao2009-01-071-1/+3
| | | | | | | | | | This patch moves all definitions of the PCI resource names to an 'enum', and also replaces some hard-coded resource variables with symbol names. This change eases introduction of device specific resources. Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Make settable sysfs attributes more consistentTrent Piepho2009-01-071-20/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | PCI devices have three settable boolean attributes, enable, broken_parity_status, and msi_bus. The store functions for these would silently interpret "0x01" as false, "1llogical" as true, and "true" would be (silently!) ignored and do nothing. This is inconsistent with typical sysfs handling of settable attributes, and just plain doesn't make much sense. So, use strict_strtoul(), which was created for this purpose. The store functions will treat a value of 0 as false, non-zero as true, and return -EINVAL for a parse failure. Additionally, is_enabled_store() and msi_bus_store() return -EPERM if CAP_SYS_ADMIN is lacking, rather than silently doing nothing. This is more typical behavior for sysfs attributes that need a capability. And msi_bus_store() will only print the "forced subordinate bus ..." warning if the MSI flag was actually forced to a different value. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* resource: allow MMIO exclusivity for device driversArjan van de Ven2009-01-071-0/+3
| | | | | | | | | | | | | | | | | | | | | Device drivers that use pci_request_regions() (and similar APIs) have a reasonable expectation that they are the only ones accessing their device. As part of the e1000e hunt, we were afraid that some userland (X or some bootsplash stuff) was mapping the MMIO region that the driver thought it had exclusively via /dev/mem or via various sysfs resource mappings. This patch adds the option for device drivers to cause their reserved regions to the "banned from /dev/mem use" list, so now both kernel memory and device-exclusive MMIO regions are banned. NOTE: This is only active when CONFIG_STRICT_DEVMEM is set. In addition to the config option, a kernel parameter iomem=relaxed is provided for the cases where developers want to diagnose, in the field, drivers issues from userspace. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: check mmap range of /proc/bus/pci files tooJesse Barnes2009-01-071-1/+1
| | | | | | | | /proc/bus/pci allows you to mmap resource ranges too, so we should probably be checking to make sure the mapping is somewhat valid. Uses the same code as the recent sysfs mmap range checking patch from Linus. Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and ↵Rusty Russell2008-12-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | cpulist_scnprintf to take pointers. Impact: change calling convention of existing cpumask APIs Most cpumask functions started with cpus_: these have been replaced by cpumask_ ones which take struct cpumask pointers as expected. These four functions don't have good replacement names; fortunately they're rarely used, so we just change them over. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: paulus@samba.org Cc: mingo@redhat.com Cc: tony.luck@intel.com Cc: ralf@linux-mips.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: cl@linux-foundation.org Cc: srostedt@redhat.com
* PCI: fix range check on mmapped sysfs resource filesEd Swierk2008-11-031-1/+1
| | | | | | | | | | pci_mmap_fits() returns the wrong answer if the sysfs resource file size is not a multiple of the page size. vm_end and vm_start are already page-aligned, so size - start < nr, causing mmap() to return EINVAL. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add ability to mmap legacy_io on some platformsBenjamin Herrenschmidt2008-10-201-5/+88
| | | | | | | | | | | | | | This adds the ability to mmap legacy IO space to the legacy_io files in sysfs on platforms that support it. This will allow to clean up X to use this instead of /dev/mem for legacy IO accesses such as those performed by Int10. While at it I moved pci_create/remove_legacy_files() to pci-sysfs.c where I think they belong, thus making more things statis in there and cleaned up some spurrious prototypes in the ia64 pci.h file Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: centralize the capabilities code in pci-sysfs.cZhao, Yu2008-10-201-55/+83
| | | | | | | | | This patch centralizes functions used to add and remove sysfs entries for various capabilities. With this cleanup, the code is more readable and easier for adding new capability related functions. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: replace cfg space size (256/4096) by macros.Zhao, Yu2008-10-201-5/+5
| | | | | | | | | | This is a cleanup that changes all PCI configuration space size representations to the macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE). And the macros are also moved from drivers/pci/probe.c to drivers/pci/pci.h. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Check mapped ranges on sysfs resource filesLinus Torvalds2008-10-021-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | This is loosely based on a patch by Jesse Barnes to check the user-space PCI mappings though the sysfs interfaces. Quoting Jesse's original explanation: It's fairly common for applications to map PCI resources through sysfs. However, with the current implementation, it's possible for an application to map far more than the range corresponding to the resourceN file it opened. This patch plugs that hole by checking the range at mmap time, similar to what is done on platforms like sparc64 in their lower level PCI remapping routines. It was initially put together to help debug the e1000e NVRAM corruption problem, since we initially thought an X driver might be walking past the end of one of its mappings and clobbering the NVRAM. It now looks like that's not the case, but doing the check is still important for obvious reasons. and this version of the patch differs in that it uses a helper function to clarify the code, and does all the checks in pages (instead of bytes) in order to avoid overflows when doing "<< PAGE_SHIFT" etc. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.Benjamin Li2008-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the VPD end tag will hang the device. This problem was initially observed when a vpd entry was created in sysfs ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry will dump 32k of data. Reading a full 32k will cause an access beyond the VPD end tag causing the device to hang. Once the device is hung, the bnx2 driver will not be able to reset the device. We believe that it is legal to read beyond the end tag and therefore the solution is to limit the read/write length. A majority of this patch is from Matthew Wilcox who gave code for reworking the PCI vpd size information. A PCI quirk added for the Broadcom NIC's to limit the read/write's. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Restrict VPD read permission to rootBen Hutchings2008-07-011-1/+1
| | | | | | | | | | Some PCI devices will lock up if we attempt to read from VPD addresses beyond some device-dependent limit. Until we can identify these devices and adjust the file size accordingly, only let root read VPD through sysfs to prevent a DoS by normal users. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fixup write combine comment in pci_mmap_resourceJesse Barnes2008-06-121-1/+0
| | | | | | | Now that we can actually do write combining properly, there's no need to have the FIXME. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86: PAT export resource_wc in pci sysfsvenkatesh.pallipadi@intel.com2008-06-121-22/+62
| | | | | | | | | | | For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2008-04-211-14/+100
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits) PCI: Change PCI subsystem MAINTAINER PCI: pci-iommu-iotlb-flushing-speedup PCI: pci_setup_bridge() mustn't be __devinit PCI: pci_bus_size_cardbus() mustn't be __devinit PCI: pci_scan_device() mustn't be __devinit PCI: pci_alloc_child_bus() mustn't be __devinit PCI: replace remaining __FUNCTION__ occurrences PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno() PCI: clean up resource alignment management PCI: aerdrv_acpi.c: remove unneeded NULL check PCI: Update VIA CX700 quirk PCI: Expose PCI VPD through sysfs PCI: iommu: iotlb flushing PCI: simplify quirk debug output PCI: iova RB tree setup tweak PCI: parisc: use generic pci_enable_resources() PCI: ppc: use generic pci_enable_resources() PCI: powerpc: use generic pci_enable_resources() PCI: ia64: use generic pci_enable_resources() ...
| * PCI: Expose PCI VPD through sysfsBen Hutchings2008-04-201-14/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vital Product Data (VPD) may be exposed by PCI devices in several ways. It is generally unsafe to read this information through the existing interfaces to user-land because of stateful interfaces. This adds: - abstract operations for VPD access (struct pci_vpd_ops) - VPD state information in struct pci_dev (struct pci_vpd) - an implementation of the VPD access method specified in PCI 2.2 (in access.c) - a 'vpd' binary file in sysfs directories for PCI devices with VPD operations defined It adds a probe for PCI 2.2 VPD in pci_scan_device() and release of VPD state in pci_release_dev(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * PCI: add PCI Express ASPM supportShaohua Li2008-04-201-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | cpumask: use new cpus_scnprintf functionMike Travis2008-04-191-2/+18
|/ | | | | | | | | | | | | * Cleaned up references to cpumask_scnprintf() and added new cpulist_scnprintf() interfaces where appropriate. * Fix some small bugs (or code efficiency improvments) for various uses of cpumask_scnprintf. * Clean up some checkpatch errors. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman2008-02-021-5/+0
| | | | | | | | | | | This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: make pci_bus a struct deviceGreg Kroah-Hartman2008-02-011-3/+3
| | | | | | | | | | | | | | This moves the pci_bus class device to be a real struct device and at the same time, place it in the device tree in the correct location. Note, the old "bridge" symlink is now gone, but this was a non-standard link and no userspace program used it. If you need to determine the device that the bus is on, follow the standard device symlink, or walk up the device tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: PCIE ASPM supportShaohua Li2008-02-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: drivers/pci/pci-sysfs.c: Add missing pci_dev_putJulia Lawall2007-11-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There should be a pci_dev_put when breaking out of a loop that iterates over calls to pci_get_device and similar functions. This was fixed using the following semantic patch. // <smpl> @@ identifier d; type T; expression e; iterator for_each_pci_dev; @@ T *d; ... for_each_pci_dev(d) {... when != pci_dev_put(d) when != e = d ( return d; | + pci_dev_put(d); ? return ...; ) ...} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Remove capability.h from mm.hAlexey Dobriyan2007-07-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I forgot to remove capability.h from mm.h while removing sched.h! This patch remedies that, because the only inline function which was using CAP_something was made out of line. Cross-compile tested without regressions on: all powerpc defconfigs all mips defconfigs all m68k defconfigs all arm defconfigs all ia64 defconfigs alpha alpha-allnoconfig alpha-defconfig alpha-up arm i386 i386-allnoconfig i386-defconfig i386-up ia64 ia64-allnoconfig ia64-defconfig ia64-up m68k mips parisc parisc-allnoconfig parisc-defconfig parisc-up powerpc powerpc-up s390 s390-allnoconfig s390-defconfig s390-up sparc sparc-allnoconfig sparc-defconfig sparc-up sparc64 sparc64-allnoconfig sparc64-defconfig sparc64-up um-x86_64 x86_64 x86_64-allnoconfig x86_64-defconfig x86_64-up as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-07-121-1/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
| * PCI: Make pcibios_add_platform_entries() return errorsMichael Ellerman2007-07-111-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently pcibios_add_platform_entries() returns void, but could fail, so instead have it return an int and propagate errors up to pci_create_sysfs_dev_files(). Fixes: arch/powerpc/kernel/pci_64.c: In function 'pcibios_add_platform_entries': arch/powerpc/kernel/pci_64.c:878: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result arch/powerpc/kernel/pci_32.c: In function 'pcibios_add_platform_entries': arch/powerpc/kernel/pci_32.c:1043: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * PCI: Use a weak symbol for the empty version of pcibios_add_platform_entries()Michael Ellerman2007-07-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not sure if this is going to fly, weak symbols work on the compilers I'm using, but whether they work for all of the affected architectures I can't say. I've cc'ed as many arch maintainers/lists as I could find. But assuming they do, we can use a weak empty definition of pcibios_add_platform_entries() to avoid having an empty definition on every arch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui2007-07-111-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | sysfs: kill unnecessary attribute->ownerTejun Heo2007-07-111-4/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Free resource files in error path of pci_create_sysfs_dev_files()Michael Ellerman2007-05-021-1/+3
| | | | | | | | | pci_create_sysfs_dev_files() should call pci_remove_resource_files() in its error path, to match the call it makes to pci_create_resource_files(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: fix sysfs rom file creation for BIOS ROM shadowsJesse Barnes2007-05-021-2/+3
| | | | | | | | | | | | | | | | | | | | At one time, if a BIOS ROM shadow was detected for the boot video device (stored at offset 0xc0000), we'd set a special resource flag, IORESOURCE_ROM_SHADOW, so that the sysfs ROM file code could handle it properly. That broke along the way somewhere though, so current kernels will be missing 'rom' files in sysfs if the video device doesn't have an explicit ROM BAR. This patch fixes the regression by moving the video fixup quirk to a little later in the boot cycle (to avoid having its work undone by PCI resource allocation) and checking in the PCI sysfs code whether a rom file should be created due to a shadow resource, which is also moved to a little later in the boot cycle so it will occur after the video fixup. Tested and works on my i386 test box. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Make PCI device numa-node attribute visible in sysfsBrice Goglin2007-02-161-0/+11
| | | | | | | | | Export the numa-node attribute of PCI devices in sysfs so that user applications may choose where to be placed accordingly. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: switch pci_{enable,disable}_device() to be nestableInaky Perez-Gonzalez2006-12-011-12/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes the pci_{enable,disable}_device() functions to work in a nested basis, so that eg, three calls to enable_device() require three calls to disable_device(). The reason for this is to simplify PCI drivers for multi-interface/capability devices. These are devices that cram more than one interface in a single function. A relevant example of that is the Wireless [USB] Host Controller Interface (similar to EHCI) [see http://www.intel.com/technology/comms/wusb/whci.htm]. In these kind of devices, multiple interfaces are accessed through a single bar and IRQ line. For that, the drivers map only the smallest area of the bar to access their register banks and use shared IRQ handlers. However, because the order at which those drivers load cannot be known ahead of time, the sequence in which the calls to pci_enable_device() and pci_disable_device() cannot be predicted. Thus: 1. driverA starts pci_enable_device() 2. driverB starts pci_enable_device() 3. driverA shutdown pci_disable_device() 4. driverB shutdown pci_disable_device() between steps 3 and 4, driver B would loose access to it's device, even if it didn't intend to. By using this modification, the device won't be disabled until all the callers to enable() have called disable(). This is implemented by replacing 'struct pci_dev->is_enabled' from a bitfield to an atomic use count. Each caller to enable increments it, each caller to disable decrements it. When the count increments from 0 to 1, __pci_enable_device() is called to actually enable the device. When it drops to zero, pci_disable_device() actually does the disabling. We keep the backend __pci_enable_device() for pci_default_resume() to use and also change the sysfs method implementation, so that userspace enabling/disabling the device doesn't disable it one time too much. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pci: don't try to remove sysfs files before they are setup.David Miller2006-11-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI sysfs attributes are created after the initial PCI bus scan. With the addition of more return value checking and assertions in the device and sysfs layers we now can get dumps like this on sparc64: [ 20.135032] Call Trace: [ 20.135042] [0000000000537f88] pci_remove_bus_device+0x30/0xc0 [ 20.135076] [000000000078f890] pci_fill_in_pbm_cookies+0x98/0x440 [ 20.135109] [000000000042e828] sabre_scan_bus+0x230/0x400 [ 20.135139] [000000000078c710] pcibios_init+0x58/0xa0 [ 20.135159] [0000000000416f14] init+0x9c/0x2e0 [ 20.135190] [0000000000417a50] kernel_thread+0x38/0x60 [ 20.135211] [0000000000417170] rest_init+0x18/0x40 [ 20.135514] PCI0(PBMB): Bus running at 33MHz It's triggering because removal of the "config" PCI sysfs file for the device fails. On sparc64, after probing the device, we'll delete the PCI device via pci_remove_bus_device() if we cannot find the firmware device tree node corresponding to it. This is fine, but at this point the sysfs files for the PCI device won't be setup yet. So we should not try to do anything in pci_remove_sysfs_dev_files() if pci_sysfs_init() has not run yet. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* PCI: fix __must_check warningsGreg Kroah-Hartman2006-09-261-39/+73
| | | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* MSI: Export the PCI_BUS_FLAGS_NO_MSI flag in sysfsBrice Goglin2006-09-261-0/+41
| | | | | | | | | | | | | | | | | | | | Export the PCI_BUS_FLAGS_NO_MSI flag of a PCI bus in the sysfs files of its parent device and make it writable. Could be used to: * disable MSI on a device which has not been blacklisted yet * allow MSI when some setpci hacks enable MSI support (for instance on the ServerWorks HT2000 chipset where the MSI HT cap is disabled by default). Architecture where some bus have no parent chipset cannot use this strategy to change MSI support. If the chipset does not have a subordinate bus, its 'bus_msi' file is empty. Also document and warn about the possible danger of changing the flag. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman2006-06-271-2/+2
| | | | | | | | Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Bus Parity Status sysfs interfaceDoug Thompson2006-06-211-0/+24
| | | | | | | | | | | | | | | From: Doug Thompson <norsk5@yahoo.com> This patch adds the 'broken_parity_status' sysfs attribute file to a PCI device. Reading this attribute a userland program can determine if PCI device provides false positives (value of 1) in its generation of PCI Parity status, or not (value of 0). As PCI devices are found to be 'bad' in this regard, userland programs can also set the appropriate value (root access only) of a faulty device. This per device information will be used in the EDAC PCI Parity scanner code in a future patch once this interface becomes available. Signed-off-by: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Add a "enable" sysfs attribute to the pci devices to allow ↵Arjan van de Ven2006-06-211-0/+21
| | | | | | | | | | | | | | | | | | userspace (Xorg) to enable devices without doing foul direct access This patch adds an "enable" sysfs attribute to each PCI device. When read it shows the "enabled-ness" of the device, but you can write a "0" into it to disable a device, and a "1" to enable it. This later is needed for X and other cases where userspace wants to enable the BARs on a device (typical example: to run the video bios on a secundary head). Right now X does all this "by hand" via bitbanging, that's just evil. This allows X to no longer do that but to just let the kernel do this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> CC: Peter Jones <pjones@redhat.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: kzalloc() conversion in drivers/pciEric Sesterhenn2006-03-231-2/+1
| | | | | | | | this patch converts drivers/pci to kzalloc usage. Compile tested with allyes config. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Block config access during BISTBrian King2005-10-281-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI adapters (eg. ipr scsi adapters) have an exposure today in that they issue BIST to the adapter to reset the card. If, during the time it takes to complete BIST, userspace attempts to access PCI config space, the host bus bridge will master abort the access since the ipr adapter does not respond on the PCI bus for a brief period of time when running BIST. On PPC64 hardware, this master abort results in the host PCI bridge isolating that PCI device from the rest of the system, making the device unusable until Linux is rebooted. This patch is an attempt to close that exposure by introducing some blocking code in the PCI code. When blocked, writes will be humored and reads will return the cached value. Ben Herrenschmidt has also mentioned that he plans to use this in PPC power management. Signed-off-by: Brian King <brking@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/pci/access.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci-sysfs.c | 20 +++++----- drivers/pci/pci.h | 7 +++ drivers/pci/proc.c | 28 +++++++-------- drivers/pci/syscall.c | 14 +++---- include/linux/pci.h | 7 +++ 6 files changed, 134 insertions(+), 31 deletions(-)
* [PATCH] PCI: convert kcalloc to kzallocPekka Enberg2005-09-221-1/+1
| | | | | | | | | This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Subject: PATCH: fix numa caused compile warningsAlan Cox2005-09-101-3/+7
| | | | | | | | | pcibus_to_cpumask expands into more than just an initialiser so gcc moans about code before variable declarations. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patchMichael Ellerman2005-06-271-5/+21
| | | | | | | | | | | | | | | | | | | | | | | This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch which is in 2.6.12-rc4-mm1. It fixes the patch to work on PPC iSeries, removes some debug printks at Ben's request, and incorporates your fix-pci-mmap-on-ppc-and-ppc64-fix.patch also. Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org> This patch was discussed at length on linux-pci and so far, the last iteration of it didn't raise any comment. It's effect is a nop on architecture that don't define the new pci_resource_to_user() callback anyway. It allows architecture like ppc who put weird things inside of PCI resource structures to convert to some different value for user visible ones. It also fixes mmap'ing of IO space on those archs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: fix show_modalias() function due to attribute changeGreg Kroah-Hartman2005-06-201-1/+1
| | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - ↵Yani Ioannou2005-06-201-3/+3
| | | | | | | drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Make attributes names const char *Dmitry Torokhov2005-06-201-6/+7
| | | | | | | sysfs: make attributes and attribute_group's names const char * Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: add modalias sysfs file for pci devicesGreg KH2005-05-171-0/+12
| | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: fix up word-aligned 16-bit PCI config access through sysfsssant@in.ibm.com2005-05-031-24/+58
| | | | | | | | | | | This patch adds the possibility to do word-aligned 16-bit atomic PCI configuration space accesses via the sysfs PCI interface. As a result, problems with Emulex LFPC on IBM PowerPC64 are fixed. Patch is present in SLES 9 SP1. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 19:13:03 +0000