summaryrefslogtreecommitdiffstats
path: root/drivers/phy
Commit message (Collapse)AuthorAgeFilesLines
* phy: phy-ti-pipe3: fix inconsistent enumeration of PCIe gen2 cardsVignesh R2014-12-232-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to DRA74x silicon rev 1.1, pcie_pcs register bits 8-15 and bits 16-23 were used to configure RC delay count for phy1 and phy2 respectively. phyid was used as index to distinguish the phys and to configure the delay values appropriately. As of DRA74x silicon rev 1.1, pcie_pcs register definition has changed. Bits 16-23 are used to configure delay values for *both* phy1 and phy2. Hence phyid is no longer required. So, drop id field from ti_pipe3 structure and its subsequent references for configuring pcie_pcs register. Also, pcie_pcs register now needs to be configured with delay value of 0x96 at bit positions 16-23. See register description of CTRL_CORE_PCIE_PCS in ARM572x TRM, SPRUHZ6, October 2014, section 18.5.2.2, table 18-1804. This is needed to ensure Gen2 cards are enumerated consistently. DRA72x silicon behaves same way as DRA74x rev 1.1 as far as this functionality is considered. Test results on DRA74x and DRA72x EVMs: Before patch ------------ DRA74x ES 1.0: Gen1 cards work, Gen2 cards do not work (expected result due to silicon errata) DRA74x ES 1.1: Gen1 cards work, Gen2 cards do not work sometimes due to incorrect programming of register DRA72x: Gen1 cards work, Gen2 cards do not work sometimes due to incorrect programming of register After patch ----------- DRA74x ES 1.0: Gen1 cards work, Gen2 cards do not work (expected result due to silicon errata) DRA74x ES 1.1: Gen1 cards work, Gen2 cards work consistently. DRA72x: Gen1 and Gen2 cards enumerate consistently. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy-sun4i-usb: Change disconnect threshold value for sun6iHans de Goede2014-12-231-1/+2
| | | | | | | | | | | The allwinner SDK uses a value of 3 for the disconnect threshold setting on sun6i, do the same in the kernel. In my previous experience with sun5i problems getting the threshold right is important to avoid usb2 devices being unplugged sometimes going unnoticed. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: miphy28lp: unlock on error in miphy28lp_init()Dan Carpenter2014-12-231-1/+2
| | | | | | | | We need to unlock before returning the -EINVAL here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds2014-12-182-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
| * phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki2014-12-132-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/phy/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
* | Merge tag 'for-3.19' of ↵Greg Kroah-Hartman2014-11-2728-118/+1936
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing Kishon writes: Improvements in phy-core specifically on PHY core finds the PHY in the case of non-dt boot. Adds three new PHY drivers using the PHY framework and some miscellaneous fixes and cleanups.
| * | phy: add support for USB cluster on the Armada 375 SoCGregory CLEMENT2014-11-263-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Armada 375 SoC comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. This commit adds a driver integrated in the generic PHY framework to control this USB cluster feature. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [ kishon@ti.com : Made it to use the updated devm_phy_create API and soem cosmentic changes in Kconfig file.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
| * | phy: Use PTR_ERR_OR_ZERO to fix warning raised by coccinelleGregory CLEMENT2014-11-264-16/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: exynos7-usbdrd: Update dependency for ARCH_EXYNOSVivek Gautam2014-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This PHY controller is also present on Exynos7 platform in arch-exynos family. So PHY_EXYNOS5_USBDRD should now depend on ARCH_EXYNOS. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supplyVivek Gautam2014-11-221-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Exynos boards have a separate regulator controlling a Boost 5V supply which goes as input for VBUS regulator. So adding a control for the same in driver, to enable vbus supply on the port. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: exynos5-usbdrd: Add pipe-clk, utmi-clk and itp-clk supportVivek Gautam2014-11-221-18/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Exynos7 SoC has now separate gate control for 125MHz pipe3 phy clock, as well as 60MHz utmi phy clock. Additionally, separate gate control is available for the clock used for ITP (Isochronous Transfer Packet) generation. So get the same and control in the phy-exynos5-usbdrd driver. Suggested-by: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: remove the old lookup methodHeikki Krogerus2014-11-2225-74/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | The users of the old method are now converted to the new one. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [ kishon@ti.com : made phy-berlin-usb.c and phy-miphy28lp.c to use the updated devm_phy_create API.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: twl4030: use the new lookup methodHeikki Krogerus2014-11-221-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | Creates the lookup separately. Hard coding the consumer as it can't be anything else except musb. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: improved lookup methodHeikki Krogerus2014-11-211-1/+83
| | | | | | | | | | | | | | | | | | | | | | | | Separates registration of the phy and the lookup. The method is copied from clkdev.c, Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: add the Berlin USB PHY driverAntoine Tenart2014-11-213-0/+232
| | | | | | | | | | | | | | | | | | | | | | | | Add the driver driving the Marvell Berlin USB PHY. This allows to initialize the PHY and to use it from the USB driver later. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: berlin-sata: Add support for BG2 SATA PHYSebastian Hesselbarth2014-11-131-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Berlin BG2 also has a SATA PHY compatible with the current driver except different PHY_BASE. Add a new compatible to the driver reflecting the different PHY_BASE. Acked-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: berlin-sata: Move PHY_BASE into private data structSebastian Hesselbarth2014-11-131-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, Berlin SATA PHY driver assumes PHY_BASE address being constant. While this PHY_BASE is correct for BG2Q, older BG2 PHY_BASE is different. Prepare the driver for BG2 support by moving the phy_base into private driver data. Acked-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: sun4i: add support for USB phy0Roman Byshko2014-11-131-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver for sun4i USB phys currently supports only phy1 and phy2 which are used for USB host controllers. This patch adds support for USB phy0, which is used by the musb hdrc USB controller. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: phy-core: use the np present in of_phandle_args to get the PHYKishon Vijay Abraham I2014-11-121-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | Instead of using the node pointer of the PHY provider and then scanning its child nodes to get a reference to the PHY, directly use the node pointer present in of_phandle_args to get a reference to the PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: miphy28lp: Tune tx impedance across Soc cutsGabriel FERNANDEZ2014-11-121-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch to compensate tx impedance (Sata, PCIe) depending on Soc cuts the kernel is built for. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: miphy28lp: Add SSC support for PCIEGabriel FERNANDEZ2014-11-121-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SSC is the technique of modulating the operating frequency of a signal slightly to spread its radiated emissions over a range of frequencies. This reduction in the maximum emission for a given frequency helps meet radiated emission requirements. These settings are applicable for PCIE with Internal clock. Signed-off-by: Harsh Gupta <harsh.gupta@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: miphy28lp: Add SSC support for SATAGabriel FERNANDEZ2014-11-121-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch to tune on/off the ssc on miphy sata setup. User can now enable ssc via dt blob, it is useful to reduce effects of EMI. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: miphy28lp: Provide support for the MiPHY28lp Generic PHYGabriel FERNANDEZ2014-11-123-0/+1186
| |/ | | | | | | | | | | | | | | | | | | The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe or USB3 devices. Signed-off-by: alexandre torgue <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | Merge tag 'usb-for-v3.19' of ↵Greg Kroah-Hartman2014-11-252-12/+8
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.19 merge window This time, a very pull request with 216 non-merge commits. Most of the commits contained here are sparse or coccinelle fixes ranging from missing 'static' to returning 0 in case of errors. More importantly, we have the removal the now unnecessary 'driver' argument to ->udc_stop(). DWC2 learned about Dual-Role builds. Users of this IP can now have a single driver built for host and device roles. DWC3 got support for two new HW platforms: Exynos7 and AMD. The Broadcom USB 3.0 Device Controller IP is now supported and so is PLX USB338x, which means DWC3 has lost is badge as the only USB 3.0 peripheral IP supported on Linux. Thanks for Tony Lindgren's work, we can now have a distro-like kernel where all MUSB glue layers can be built into the same kernel (statically or dynamically linked) and it'll work in PIO (DMA will come probably on v3.20). Other than these, the usual set of cleanups and non-critical fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * phy: twl4030: Fix build breakageFelipe Balbi2014-11-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e47d925 (usb: move the OTG state from the USB PHY to the OTG structure) moved the OTG state field from struct usb_phy to struct usb_otg but, even though I fixed many other build breakages, I still missed one on phy-twl4030-usb.c. Fix the build breakage now. While at that, also a build warning introduced by the same commit. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: rename phy to usb_phy in OTGAntoine Tenart2014-11-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | This patch prepares the introduction of the generic PHY support in the USB OTG common functions. The USB PHY member of the OTG structure is renamed to 'usb_phy' and modifications are done in all drivers accessing it. Renaming this pointer will allow to keep the compatibility for USB PHY drivers. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: move the OTG state from the USB PHY to the OTG structureAntoine Tenart2014-11-031-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before using the PHY framework instead of the USB PHY one, we need to move the OTG state into another place, since it won't be available when USB PHY isn't used. This patch moves the OTG state into the OTG structure, and makes all the needed modifications in the drivers using the OTG state. [ balbi@ti.com : fix build regressions with phy-tahvo.c, musb_dsps.c, phy-isp1301-omap, and chipidea's debug.c ] Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | phy: omap-usb2: Enable runtime PM of omap-usb2 phy properlyOussama Ghorbel2014-11-051-2/+4
|/ | | | | | | | | | | | | | | | | | The USB OTG port does not work since v3.16 on omap platform. This is a regression introduced by the commit eb82a3d846fa (phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove). This because the call to pm_runtime_enable() function is moved after the call to devm_phy_create() function, which has side effect since later in the subsequent calls of devm_phy_create() there is a check with pm_runtime_enabled() to configure few things. Fixes: eb82a3d846fa Signed-off-by: Oussama Ghorbel <ghorbel@pivasoftware.com> Tested-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* phy: remove .owner field for drivers using module_platform_driverPeter Griffin2014-09-2418-18/+0
| | | | | | | | | This patch removes the superflous .owner field for drivers which use the module_platform_driver or platform_driver_register api, as this is overriden in __platform_driver_register. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: exynos-dp-video: Use syscon support to control pmu registerVivek Gautam2014-09-241-25/+54
| | | | | | | | | | | | | | | | | Currently the DP_PHY_ENABLE register is mapped in the driver, and accessed to control power to the PHY. With mfd-syscon and regmap interface available at our disposal, it's wise to use that instead of using a 'reg' property for the controller and allocating a memory resource for that. To facilitate this, we have added another compatible string for Exynso5420 SoC to acquire driver data which contains different DP-PHY-CONTROL register offset. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-stih41x-usb: Add usb phy support for STiH41x SoCs.Peter Griffin2014-09-243-0/+196
| | | | | | | | | This driver adds support for USB (1.1 and 2.0) phy for STiH415 and STiH416 System-On-Chips from STMicroelectronics. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-stih407-usb: Add usb picoPHY driver found on stih407 SoC familyPeter Griffin2014-09-243-0/+187
| | | | | | | | | | This is the generic phy driver for the picoPHY ports used by the USB2 and USB3 Host controllers when controlling usb2/1.1 devices. It is found on STiH407 SoC family from STMicroelectronics. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* usb: phy: twl4030-usb: Use mutex instead of spinlock for protecting the dataTony Lindgren2014-09-241-9/+7
| | | | | | | | | | | We're using threaded irq on a I2C bus and we're sleeping in twl4030_usb_irq() as it calls twl4030_usb_linkstat() which calls the i2c functions. If we ever need to lock for longer I2C transaction sequences a mutex will allow us to do that easily. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* usb: phy: twl4030-usb: Remove asleep and rely on runtime PMTony Lindgren2014-09-241-9/+5
| | | | | | | | There's no longer need for tracking the phy state in the driver with asleep, we can now rely on runtime PM. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* usb: phy: twl4030-usb: Move code from twl4030_phy_power to the runtime PM callsTony Lindgren2014-09-241-41/+31
| | | | | | | | | | We don't need twl4030_phy_power() any longer now that we have the runtime PM calls. Let's get rid of it as it's confusing. No functional changes, just move the code and use res instead of ret as we are not returning that value. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* usb: phy: twl4030-usb: Simplify phy init to use runtime PMTony Lindgren2014-09-241-17/+3
| | | | | | | | We can now let the interrupt and delayed work do all that's needed with runtime PM. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* usb: phy: twl4030-usb: Remove unused irq_enabledTony Lindgren2014-09-241-2/+0
| | | | | | | It's not being used any longer. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-spear1340-miphy: Use module_platform_driver to register driver.Peter Griffin2014-09-241-12/+1
| | | | | | | | | | Using the module_platform_driver macro to register the driver as this gets rid of a lot of the boilerplate code. Also remove .owner field as this gets overridden in __platform_driver_register. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-spear1310-miphy: Use module_platform_driver to register driver.Peter Griffin2014-09-241-12/+1
| | | | | | | | | | Use the module_platform_driver macro to register the driver as this gets rid of a lot of the boilerplate code. Also remove .owner field as this gets overridden in __platform_driver_register. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-spear1340-miphy: Remove unncessary site specific OOM messagesPeter Griffin2014-09-241-3/+1
| | | | | | | | | | | | | The site specific OOM messages are unncessary, because they duplicate messages from the memory subsystem which include dump_stack(). Removing these superflous messages makes the kernel smaller. A discussion here http://patchwork.ozlabs.org/patch/324158/ found that all error paths from kzalloc will print a error message, and that any error path which maybe found which doesn't would be considered a bug in kzalloc. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-spear1310-miphy: Remove unncessary site specific OOM messagesPeter Griffin2014-09-241-3/+1
| | | | | | | | | | | | | The site specific OOM messages are unncessary, because they duplicate messages from the memory subsystem which include dump_stack(). Removing these superflous messages makes the kernel smaller. A discussion here http://patchwork.ozlabs.org/patch/324158/ found that all error paths from kzalloc will print a error message, and that any error path which maybe found which doesn't would be considered a bug in kzalloc. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-ti-pipe3: Remove unncessary site specific OOM messagesPeter Griffin2014-09-241-3/+2
| | | | | | | | | | | | | The site specific OOM messages are unncessary, because they duplicate messages from the memory subsystem which include dump_stack(). Removing these superflous messages makes the kernel smaller. A discussion here http://patchwork.ozlabs.org/patch/324158/ found that all error paths from kzalloc will print a error message, and that any error path which maybe found which doesn't would be considered a bug in kzalloc. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-omap-usb2: Remove unncessary site specific OOM messagesPeter Griffin2014-09-241-6/+2
| | | | | | | | | | | | | The site specific OOM messages are unncessary, because they duplicate messages from the memory subsystem which include dump_stack(). Removing these superflous messages makes the kernel smaller. A discussion here http://patchwork.ozlabs.org/patch/324158/ found that all error paths from kzalloc will print a error message, and that any error path which maybe found which doesn't would be considered a bug in kzalloc. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-mvebu-sata: Add missing error check for devm_kzallocPeter Griffin2014-09-241-0/+2
| | | | | | | | | | | Currently this driver is missing a check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. This patch adds the aformentioned missing check. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-omap-control: Remove unncessary site specific OOM messagesPeter Griffin2014-09-241-3/+1
| | | | | | | | | | | | | The site specific OOM messages are unncessary, because they duplicate messages from the memory subsystem which include dump_stack(). Removing these superflous messages makes the kernel smaller. A discussion here http://patchwork.ozlabs.org/patch/324158/ found that all error paths from kzalloc will print a error message, and that any error path which maybe found which doesn't would be considered a bug in kzalloc. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Renesas R-Car Gen2 PHY driverSergei Shtylyov2014-09-243-0/+349
| | | | | | | | | | | | | | | | | | This PHY, though formally being a part of Renesas USBHS controller, contains the UGCTRL2 register that controls multiplexing of the USB ports (Renesas calls them channels) to the different USB controllers: channel 0 can be connected to either PCI EHCI/OHCI or USBHS controllers, channel 2 can be connected to PCI EHCI/OHCI or xHCI controllers. This is a new driver for this USB PHY currently already supported under drivers/ usb/phy/. The reason for writing the new driver was the requirement that the multiplexing of USB channels to the controller be dynamic, depending on what USB drivers are loaded, rather than static as provided by the old driver. The infrastructure provided by drivers/phy/phy-core.c seems to fit that purpose ideally. The new driver only supports device tree probing for now. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: spear1340-miphy: fix driver dependenciesBartlomiej Zolnierkiewicz2014-09-121-0/+1
| | | | | | | | | | | ST SPEAR1340-MIPHY support should be available only on ST SPEAr1340 machine. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: spear1310-miphy: fix driver dependenciesBartlomiej Zolnierkiewicz2014-09-121-0/+1
| | | | | | | | | | | ST SPEAR1310-MIPHY support should be available only on ST SPEAr1310 machine. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: miphy365x: Fix off-by-one errorLee Jones2014-09-121-0/+1
| | | | | | | | | | | | | | | We index the RX/TX speed select values in the following way: rx_tx_spd[miphy_phy->sata_gen]; However rx_tx_spd[] starts at index zero and the SATA_GENx's start at one. In this patch we pad out the first element in rx_tx_spd[] in an attempt to realign the values. Cc: Alexandre Torgue <alexandre.torgue@st.com> Reported-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: miphy365x: Select GENERIC_PHY instead of depending on itLee Jones2014-08-281-1/+1
| | | | | | | | | | Enabling GENERIC_PHY in the shared (by most ARM sub-architectures) defconfig multi_v7_defconfig is prohibited. Instead, we'll enable it from the Kconfig whenever PHY_MIPHY365X is enabled. Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 04:42:57 +0000