summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
Commit message (Collapse)AuthorAgeFilesLines
...
| * | rtc: pcf8563: stop caching voltage_lowAlexandre Belloni2019-12-181-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | voltage_low is only updated when reading the time, this means that using RTC_VL_READ will miss the VL flag if the time has not been read before using the ioctl. Always read the status from the hardware. Link: https://lore.kernel.org/r/20191214220259.621996-9-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: pcf8563: remove conditional compilationAlexandre Belloni2019-12-181-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | Always compile pcf8563_rtc_ioctl as we are sure that CONFIG_RTC_INTF_DEV is selected on actual kernel configurations. Link: https://lore.kernel.org/r/20191214220259.621996-8-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: pcf8563: remove RTC_VL_CLR handlingAlexandre Belloni2019-12-181-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove RTC_VL_CLR handling because it is a disservice to userspace as it removes the important information that the RTC data is invalid. This may lead userspace to set an invalid system time later on. Link: https://lore.kernel.org/r/20191214220259.621996-7-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: pcf8523: return meaningful value for RTC_VL_READAlexandre Belloni2019-12-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | REG_CONTROL3_BLF indicates the battery is low and needs to be replaced soon. Link: https://lore.kernel.org/r/20191214220259.621996-6-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: pcf2127: return meaningful value for RTC_VL_READAlexandre Belloni2019-12-181-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | PCF2127_BIT_CTRL3_BLF indicates the battery is low and needs to be replaced soon. Link: https://lore.kernel.org/r/20191214220259.621996-5-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: abx80x: return meaningful value for RTC_VL_READAlexandre Belloni2019-12-181-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | ABX8XX_STATUS_BLF indicates the battery is low and needs to be replaced soon. Link: https://lore.kernel.org/r/20191214220259.621996-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: ds1343: Do not hardcode SPI mode flagsLinus Walleij2019-12-101-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current use of mode flags to us SPI_MODE_3 and SPI_CS_HIGH is fragile: it overwrites anything already assigned by the SPI core. Change it thusly: - Just |= the SPI_MODE_3 so we keep other flags - Assign ^= SPI_CS_HIGH since we might be active high already, and that is usually the case with GPIOs used for chip select, even if they are in practice active low. Add a comment clarifying why ^= SPI_CS_HIGH is the right choice here. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191204225731.20306-1-linus.walleij@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: zynqmp: re-use rtc_time64_to_tm operationJean-Francois Dagenais2019-12-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This allows a subsequent commit to spin_unlock sooner. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20191128015613.10003-1-jeff.dagenais@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: stm32: add missed clk_disable_unprepare in error path of resumeChuhong Yuan2019-12-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The resume() forgets to call clk_disable_unprepare() when failed. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20191205160655.32188-1-hslester96@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | rtc: mt6397: drop free_irq of devm_ allocated irqWei Yongjun2019-12-101-9/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | The devm_request_threaded_irq function allocates irq that is released when a driver detaches. Thus, there is no reason to explicitly call free_irq in probe function. Fixes: 851b87148aa2 ("rtc: mt6397: improvements of rtc driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20191113021720.9527-1-weiyongjun1@huawei.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* | Merge tag 'mfd-next-5.6' of ↵Linus Torvalds2020-02-032-42/+181
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for ROHM BD71828 PMICs and GPIOs - Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341 New Device Support: - Add support for BD71828 to BD70528 RTC driver - Add support for Intel's Jasper Lake to LPSS PCI New Functionality: - Add support for Power Key to ROHM BD71828 - Add support for Clocks to ROHM BD71828 - Add support for GPIOs to Dialog DA9062 - Add support for USB PD Notify to ChromiumOS EC - Allow callers to specify args when requesting regmap lookup; syscon Fix-ups: - Improve error handling and sanity checking; atmel-hlcdc, dln2 - Device Tree support/documentation; bd71828, da9062, xylon,logicvc, ab8500, max14577, atmel-usart - Match devices using platform IDs; bd7xxxx - Refactor BD718x7 regulator component; bd718x7-regulator - Use standard interfaces/helpers; syscon, sm501 - Trivial (whitespace, spelling, etc); ab8500-core, Kconfig - Remove unused code; db8500-prcmu, tqmx86 - Wait until boot has finished before accessing registers; madera-core - Provide missing register value defaults; cs47l15-tables - Allow more time for hardware to reset; madera-core Bug Fixes: - Fix erroneous register values; rohm-bd70528 - Fix register volatility; axp20x, rn5t618 - Fix Kconfig dependencies; MFD_MAX77650 - Fix incorrect compatible string; da9062-core - Fix syscon_regmap_lookup_by_phandle_args() stub; syscon" * tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits) mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy mfd: wcd934x: Add support to wcd9340/wcd9341 codec mfd: syscon: Add arguments support for syscon reference mfd: rn5t618: Mark ADC control register volatile dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu} dt-bindings: atmel-usart: Remove wildcard mfd: cros_ec: Add cros-usbpd-notify subdevice mfd: da9062: Fix watchdog compatible string mfd: madera: Allow more time for hardware reset mfd: cs47l15: Add missing register default mfd: madera: Wait for boot done before accessing any other registers mfd: Kconfig: Rename Samsung to lowercase mfd: tqmx86: remove set but not used variable 'i2c_ien' mfd: dbx500-prcmu: Drop DSI pll clock functions mfd: dbx500-prcmu: Drop set_display_clocks() mfd: max77650: Select REGMAP_IRQ in Kconfig mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile mfd: ab8500: Fix ab8500-clk typo mfd: intel-lpss: Add Intel Jasper Lake PCI IDs dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions ...
| * | rtc: bd70528: add BD71828 supportMatti Vaittinen2020-01-242-42/+181
| |/ | | | | | | | | | | | | | | | | | | ROHM BD71828 PMIC RTC block is from many parts similar to one on BD70528. Support BD71828 RTC using BD70528 RTC driver and avoid re-inventing the wheel. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2020-01-311-0/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
| * | MIPS: SGI-IP27: fix readb/writeb addressingThomas Bogendoerfer2020-01-091-0/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our chosen byte swapping, which is what firmware already uses, is to do readl/writel by normal lw/sw intructions (data invariance). This also means we need to mangle addresses for u8 and u16 accesses. The mangling for 16bit has been done aready, but 8bit one was missing. Correcting this causes different addresses for accesses to the SuperIO and local bus of the IOC3 chip. This is fixed by changing byte order in ioc3 and m48rtc_rtc structs. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org
* | Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds2020-01-271-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
| * | remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2020-01-061-1/+1
| |/ | | | | | | | | | | | | | | ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
* | rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"Alexandre Belloni2020-01-041-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | There are multiple reports of this patch breaking RTC time setting for AMD platforms. This reverts commit 7ad295d5196a58c22abecef62dd4f99e2f86e831. Cc: Jinke Fan <fanjinke@hygon.cn> Link: https://lore.kernel.org/r/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com Fixes: 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon platform") Link: https://lore.kernel.org/r/20200104043110.707810-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* | rtc: mt6397: fix alarm register overwriteRan Bi2019-12-111-14/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | Alarm registers high byte was reserved for other functions. This add mask in alarm registers operation functions. This also fix error condition in interrupt handler. Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver") Signed-off-by: Ran Bi <ran.bi@mediatek.com> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Link: https://lore.kernel.org/r/1576057435-3561-6-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* | rtc: sun6i: Add support for RTC clocks on R40Chen-Yu Tsai2019-12-101-0/+16
|/ | | | | | | | | | | | | | | | | | | | When support for the R40 in the rtc-sun6i driver was split out for a separate compatible string, only the RTC half was covered, and not the clock half. Unfortunately this results in the whole driver not working, as the RTC half expects the clock half to have been initialized. Add support for the clock part as well. The clock part is like the H3, but does not need to export the internal oscillator, nor does it have a gateable LOSC external output. This fixes issues with WiFi and Bluetooth not working on the BPI M2U. Fixes: d6624cc75021 ("rtc: sun6i: Add R40 compatible") Cc: <stable@vger.kernel.org> # 5.3.x Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20191205085054.6049-1-wens@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* Merge tag 'rtc-5.5' of ↵Linus Torvalds2019-12-0369-670/+555
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A lot of unnecessary code removal in here that ends up decreasing the number of lines in the subsystem. The ds1343 and ds1347 drivers got cleaned up. The rest are the usual fixes and new features. Subsystem: - fix warnings and errors with make W=1 - UIE are now disabled while setting the RTC time - UIE are now disallowed when the RTC time is not set. Drivers: - remove unecessary .remove callbacks - Set RTC range for cros-ec, ds1343, ds1347, m41t80, s35390a, vt8500 - Use devm_platform_ioremap_resource where applicable - rv3028: add clock out support" * tag 'rtc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits) rtc: Fix Kconfig indentation rtc: xgene: Remove unused struct device in struct xgene_rtc_dev rtc: sun6i: Remove struct device from sun6i_rtc_dev rtc: st-lpc: Remove struct resource from struct st_rtc rtc: pcf8523: Remove struct pcf8523 rtc: meson: remove redundant assignment to variable retries rtc: v3020: remove set but unused variable rtc: tegra: remove set but unused variable rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtc rtc: m41t80: remove excess kerneldoc rtc: ds1685: fix build error with make W=1 rtc: ds1685: remove set but unused variables rtc: ds1374: remove unused variable rtc: sysfs: fix hctosys_show kerneldoc rtc: interface: fix kerneldoc comments rtc: msm6242: Remove unneeded msm6242_set()/msm6242_clear() functions rtc: msm6242: Fix reading of 10-hour digit rtc: tps65910: allow using RTC without alarm interrupt rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig rtc: pcf8563: Constify clkout_rates ...
| * rtc: Fix Kconfig indentationKrzysztof Kozlowski2019-11-271-3/+3
| | | | | | | | | | | | | | | | | | | | Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120133940.13881-1-krzk@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: xgene: Remove unused struct device in struct xgene_rtc_devNobuhiro Iwamatsu2019-11-271-2/+0
| | | | | | | | | | | | | | | | struct device in struct xgene_rtc_dev is not used, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123090234.32180-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: sun6i: Remove struct device from sun6i_rtc_devNobuhiro Iwamatsu2019-11-271-2/+0
| | | | | | | | | | | | | | | | struct device in struct sun6i_rtc_dev is not used, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123090538.32364-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: st-lpc: Remove struct resource from struct st_rtcNobuhiro Iwamatsu2019-11-271-1/+0
| | | | | | | | | | | | | | | | struct resource in struct st_rtc is not used, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123091241.1905-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: pcf8523: Remove struct pcf8523Nobuhiro Iwamatsu2019-11-271-14/+4
| | | | | | | | | | | | | | | | | | struct pcf8523 is referenced only by pcf8523_probe(). And member variable in this is not referenced by any function. Remove struct pcf8523. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123090838.1619-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: meson: remove redundant assignment to variable retriesColin Ian King2019-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The variable retries is being initialized with a value that is never read and it is being updated later with a new value in a for-loop. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20191122225210.109172-1-colin.king@canonical.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: v3020: remove set but unused variableAlexandre Belloni2019-11-271-2/+1
| | | | | | | | | | | | | | | | | | Fix the following warning: drivers/rtc/rtc-v3020.c: In function ‘rtc_probe’: drivers/rtc/rtc-v3020.c:287:6: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20191122102212.400158-9-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: tegra: remove set but unused variableAlexandre Belloni2019-11-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fix the following warning: drivers/rtc/rtc-tegra.c: In function ‘tegra_rtc_read_time’: drivers/rtc/rtc-tegra.c:106:11: warning: variable ‘msec’ set but not used [-Wunused-but-set-variable] Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191122102212.400158-8-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtcAlexandre Belloni2019-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | The change from u8 ctrl_reg to const struct pm8xxx_rtc_regs *regs; did not properly update the kerneldoc comment. Fixes: drivers/rtc/rtc-pm8xxx.c:64: warning: Function parameter or member 'regs' not described in 'pm8xxx_rtc' Fixes: c8d523a4b053 ("drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc") Link: https://lore.kernel.org/r/20191122102212.400158-7-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: m41t80: remove excess kerneldocAlexandre Belloni2019-11-271-1/+0
| | | | | | | | | | | | | | | | Fix the following warning: drivers/rtc/rtc-m41t80.c:716: warning: Excess function parameter 'inode' description in 'wdt_ioctl' Link: https://lore.kernel.org/r/20191122102212.400158-6-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: ds1685: fix build error with make W=1Alexandre Belloni2019-11-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | Fix the following parsing errors when building with W=1: drivers/rtc/rtc-ds1685.c:1053: error: Cannot parse struct or union! drivers/rtc/rtc-ds1685.c:1062: error: Cannot parse struct or union! drivers/rtc/rtc-ds1685.c:1363: warning: cannot understand function prototype: 'struct platform_driver ds1685_rtc_driver = ' Cc: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20191122102212.400158-5-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: ds1685: remove set but unused variablesAlexandre Belloni2019-11-271-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following warnings: drivers/rtc/rtc-ds1685.c: In function ‘ds1685_rtc_read_time’: drivers/rtc/rtc-ds1685.c:264:5: warning: variable ‘ctrlb’ set but not used [-Wunused-but-set-variable] 264 | u8 ctrlb, century; | ^~~~~ drivers/rtc/rtc-ds1685.c: In function ‘ds1685_rtc_proc’: drivers/rtc/rtc-ds1685.c:758:19: warning: variable ‘ctrlc’ set but not used [-Wunused-but-set-variable] 758 | u8 ctrla, ctrlb, ctrlc, ctrld, ctrl4a, ctrl4b, ssn[8]; | ^~~~~ Cc: Joshua Kinard <kumba@gentoo.org> Acked-By: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20191122102212.400158-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: ds1374: remove unused variableAlexandre Belloni2019-11-271-2/+1
| | | | | | | | | | | | | | | | | | | | Fix warning: drivers/rtc/rtc-ds1374.c: In function ‘ds1374_wdt_disable’: drivers/rtc/rtc-ds1374.c:442:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20191122102212.400158-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: sysfs: fix hctosys_show kerneldocAlexandre Belloni2019-11-271-1/+4
| | | | | | | | | | | | | | | | | | | | Fix undocumented function parameters: drivers/rtc/sysfs.c:112: warning: Function parameter or member 'dev' not described in 'hctosys_show' drivers/rtc/sysfs.c:112: warning: Function parameter or member 'attr' not described in 'hctosys_show' drivers/rtc/sysfs.c:112: warning: Function parameter or member 'buf' not described in 'hctosys_show' Link: https://lore.kernel.org/r/20191122102212.400158-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: interface: fix kerneldoc commentsAlexandre Belloni2019-11-271-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix kerneldoc warnings: drivers/rtc/interface.c:619: warning: Function parameter or member 'num' not described in 'rtc_handle_legacy_irq' drivers/rtc/interface.c:619: warning: Function parameter or member 'mode' not described in 'rtc_handle_legacy_irq' drivers/rtc/interface.c:804: warning: Function parameter or member 'rtc' not described in 'rtc_timer_enqueue' drivers/rtc/interface.c:804: warning: Function parameter or member 'timer' not described in 'rtc_timer_enqueue' drivers/rtc/interface.c:864: warning: Function parameter or member 'rtc' not described in 'rtc_timer_remove' drivers/rtc/interface.c:864: warning: Function parameter or member 'timer' not described in 'rtc_timer_remove' drivers/rtc/interface.c:900: warning: Function parameter or member 'work' not described in 'rtc_timer_do_work' drivers/rtc/interface.c:1035: warning: Function parameter or member 'rtc' not described in 'rtc_read_offset' drivers/rtc/interface.c:1035: warning: Function parameter or member 'offset' not described in 'rtc_read_offset' drivers/rtc/interface.c:1070: warning: Function parameter or member 'rtc' not described in 'rtc_set_offset' drivers/rtc/interface.c:1070: warning: Function parameter or member 'offset' not described in 'rtc_set_offset' Link: https://lore.kernel.org/r/20191127082932.666869-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: msm6242: Remove unneeded msm6242_set()/msm6242_clear() functionsKars de Jong2019-11-181-16/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The msm6242_set()/msm6242_clear() functions are used when writing to Control Register D to set or clear the HOLD bit when reading the current time from the RTC. Doing this with a read-modify-write cycle will potentially clear an interrupt condition which occurs between the read and the write. The datasheet states the following about this: When writing the HOLD or 30 second adjust bits of register D, it is necessary to write the IRQ FLAG bit to a "1". Since the only other bits in the register are the 30 second adjust bit (which is not used) and the BUSY bit (which is read-only), the read-modify-write cycle can be replaced by a simple write with the IRQ FLAG bit set to 1 and the other bits (except HOLD) set to 0. Tested-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Link: https://lore.kernel.org/r/20191116114620.9193-1-jongk@linux-m68k.org Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: msm6242: Fix reading of 10-hour digitKars de Jong2019-11-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was reading the wrong register as the 10-hour digit due to a misplaced ')'. It was in fact reading the 1-second digit register due to this bug. Also remove the use of a magic number for the hour mask and use the define for it which was already present. Fixes: 4f9b9bba1dd1 ("rtc: Add an RTC driver for the Oki MSM6242") Tested-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Link: https://lore.kernel.org/r/20191116110548.8562-1-jongk@linux-m68k.org Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: tps65910: allow using RTC without alarm interruptAndrey Skvortsov2019-11-171-6/+15
| | | | | | | | | | | | | | | | | | | | If tps65910 INT1 pin (IRQ output) is not wired to any IRQ controller, then it can't be used as system wakeup/alarm source, but it is still possible to read/write time from/to RTC. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Link: https://lore.kernel.org/r/20191116203748.27166-1-andrej.skvortzov@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from KconfigLi Yang2019-11-151-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The Flextimer alarm is primarily used as a wakeup source for system power management. But it shouldn't select the power management driver as they don't really have dependency of each other. Also remove the default y as it is not a critical feature for the systems. Signed-off-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/1573252856-11759-1-git-send-email-leoyang.li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: pcf8563: Constify clkout_ratesNobuhiro Iwamatsu2019-11-151-1/+1
| | | | | | | | | | | | | | | | The lates of clockout should be marked const. Make that so. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191108002449.15097-1-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: ds1302: Remove unused DRV_NAMENobuhiro Iwamatsu2019-11-151-2/+0
| | | | | | | | | | | | | | | | DRV_NAME is unused, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191108002354.15016-1-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: rx6110: Convert to SPDX identifierNobuhiro Iwamatsu2019-11-151-9/+1
| | | | | | | | | | | | | | | | Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191108002250.14937-1-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: rx6110: Remove useless rx6110_removeNobuhiro Iwamatsu2019-11-151-6/+0
| | | | | | | | | | | | | | | | rx6110_remove is empty, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191108002113.14791-1-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: Fix the AltCentury value on AMD/Hygon platformJinke Fan2019-11-081-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using following operations: date -s "21190910 19:20:00" hwclock -w to change date from 2019 to 2119 for test, it will fail on Hygon Dhyana and AMD Zen CPUs, while the same operations run ok on Intel i7 platform. MC146818 driver use function mc146818_set_time() to set register RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage reset value on Intel platform to 0x7. While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]: DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined as reserved. DV0 is set to 1, it will select Bank 1, which will disable AltCentury register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32 (AltCentury), the CMOS write will be failed on code: CMOS_WRITE(century, acpi_gbl_FADT.century). Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will enable AltCentury(0x32) register writing and finally setup century as expected. Test results on Intel i7, AMD EPYC(17h) and Hygon machine show that it works as expected. Compiling for sparc64 and alpha architectures are passed. Reference: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf section: 3.13 Real Time Clock (RTC) Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jinke Fan <fanjinke@hygon.cn> Link: https://lore.kernel.org/r/20191105083943.115320-1-fanjinke@hygon.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: bd70528: fix module alias to autoload moduleColin Ian King2019-11-081-1/+1
| | | | | | | | | | | | | | | | | | The module alias platform tag contains a spelling mistake. Fix it. Fixes: f33506abbcdd ("rtc: bd70528: Add MODULE ALIAS to autoload module") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191106083418.159045-1-colin.king@canonical.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: bd70528: Add MODULE ALIAS to autoload moduleMatti Vaittinen2019-11-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The bd70528 RTC driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for RTC is added. I'm not sure if this is a bugfix or feature addition but I guess fixes tag won't harm in this case. Fixes: 32a4a4ebf768 ("rtc: bd70528: Initial support for ROHM bd70528 RTC") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20191023114711.GA13954@localhost.localdomain Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: em3027: correct month valueIlya Ledvich2019-11-081-2/+2
| | | | | | | | | | | | | | | | | | | | The RTC month value is 1-indexed, but the kernel assumes it is 0-indexed. This may result in the RTC not rolling over correctly. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191101095422.14787-1-ilya@compulab.co.il Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: brcmstb-waketimer: add missed clk_disable_unprepareChuhong Yuan2019-11-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | This driver forgets to disable and unprepare clock when remove. Add a call to clk_disable_unprepare to fix it. Fixes: c4f07ecee22e ("rtc: brcmstb-waketimer: Add Broadcom STB wake-timer") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20191105160043.20018-1-hslester96@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: cros-ec: let the core handle rtc rangeAlexandre Belloni2019-11-081-8/+9
| | | | | | | | | | | | | | | | Let the rtc core check the date/time against the RTC range. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20191016201414.30934-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * rtc: cros-ec: remove superfluous error messageAlexandre Belloni2019-11-081-5/+2
| | | | | | | | | | | | | | | | | | The RTC core now has error messages in case of registration failure, there is no need to have other messages in the drivers. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20191016201414.30934-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-23 11:10:23 +0000