summaryrefslogtreecommitdiffstats
path: root/drivers/s390
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | s390 cio: Rewrite trace point in s390_cio_interruptThomas Richter2018-07-231-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tools like 'perf stat' parse the trace point format files defined in /sys/kernel/debug/tracing/events/s390/.../format to handle the print fmt: statement. The kernel provides a library in directory linux/tools/lib/traceevent/* for this reason. This library can not handle structures or unions defined in the TRACE_EVENT/TP_STRUCT__entry macros with __field_struct macro. There is no possibility to extract a structure member (which might be a bit field) since there is no packing information nor bit field offset by parsing the printf fmt line. Therefore rewrite the TRACE_EVENT macro and add the __field macro for the necessary fields. Keep the __fieldstruct macro to extract the complete structure when dumps are analysed. Note that the same information is displayed, this is no interface change. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/tape: replace PTR_RET with PTR_ERR_OR_ZEROGustavo A. R. Silva2018-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/dasd: replace PTR_RET with PTR_ERR_OR_ZEROGustavo A. R. Silva2018-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/ap_bus: replace PTR_RET with PTR_ERR_OR_ZEROGustavo A. R. Silva2018-07-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/keyboard: sanitize array index in do_kdsk_ioctlMartin Schwidefsky2018-07-191-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The kbd_ioctl uses two user controlled indexes for KDGKBENT/KDSKBENT. Use array_index_nospec to prevent any out of bounds speculation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/chsc: fix packed-not-aligned warningsSebastian Ott2018-07-172-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove attribute packed where possible failing this add proper alignment information to fix warnings like the one below: drivers/s390/cio/chsc.c: In function 'chsc_siosl': drivers/s390/cio/chsc.c:1287:2: warning: alignment 1 of 'struct <anonymous>' is less than 4 [-Wpacked-not-aligned] } __attribute__ ((packed)) *siosl_area; Note: this patch should be a nop since non of these structs use auto storage but allocated pages. However there are changes to the generated code because of additional padding at the end of some of the structs due to alignment when memset(foo, 0, sizeof(*foo)) is used. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/css: reduce stsch callsSebastian Ott2018-07-174-79/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both css_evaluate_new_subchannel and cio_validate_subchannel used stsch and css_sch_is_valid to check for a valid device. Reduce stsch calls during subchannel evaluation by re-using schib data. Also the type/devno valid information is only checked once. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/css: validate subchannel prior to allocationSebastian Ott2018-07-173-30/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In css_alloc_subchannel we allocate the subchannel and do a validation of the subchannel (to decide if we should look for devices via this subchannel). On a typical LPAR we find lots of subchannels to be invalid (because there is no device attached or the device is blacklisted) leading to lots of useless kmalloc and kfree calls. This patch changes the order to only allocate the subchannels that have been found valid. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/css: start the subchannel evaluation earlierSebastian Ott2018-07-171-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The css bus code uses 2 initcalls: channel_subsystem_init to initialize internal data and channel_subsystem_init_sync to start scanning for devices and wait for it to finish. The start scanning for devices part is moved to the first initcall such that more work happens in parallel. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/cio: ensure that a chpid is registered only onceSebastian Ott2018-07-172-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve locking in chp_new to make sure that we don't register the same chpid twice. Chpid registration was synchronized via the machine check handler thread but we also have codepaths to look for new chpids triggered independent of that thread (during IPL or resume from hibernate). Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/crypto: fix gcc 8 stringop-truncation warningVasily Gorbik2018-07-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace strncpy which is used to deliberately avoid string NUL-termination with memcpy. This allows to get rid of gcc 8 stringop-truncation warning: inlined from 'query_crypto_facility.constprop' at drivers/s390/crypto/pkey_api.c:702:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation] Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/sclp_async: replace callhome proc handler with generic oneVasily Gorbik2018-07-061-31/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reuse generic proc_dointvec_minmax proc handler instead of proc_handler_callhome. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/dasd: fix cast-function-type warningsSebastian Ott2018-07-041-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the tasklets parameter type to fix W=1 warnings when building with gcc 8 like below: drivers/s390/block/dasd.c: In function 'dasd_alloc_device': drivers/s390/block/dasd.c:129:8: warning: cast between incompatible function types from 'void (*)(struct dasd_device *)' to 'void (*)(long unsigned int)' [-Wcast-function-type] (void (*)(unsigned long)) dasd_device_tasklet, ^ Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Acked-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/monwriter: fix gcc 8 stringop-truncation warningVasily Gorbik2018-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following gcc warning is issued for strncpy which is used to deliberately avoid string NUL-termination. Reuse memcpy to avoid the warning. inlined from 'monwrite_diag' at drivers/s390/char/monwriter.c:64:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 7 bytes from a string of the same length [-Wstringop-truncation] Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/tape: fix gcc 8 stringop-truncation warningVasily Gorbik2018-07-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace strncpy which is used to deliberately avoid string NUL-termination with memcpy. This allows to get rid of gcc 8 stringop-truncation warning: inlined from 'ext_to_int_kekl' at drivers/s390/char/tape_3590.c:123:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation] Also replaces "for" loop on memset. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/tape: fix stringop-truncation gcc 8 warningsVasily Gorbik2018-07-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use strlcpy to make sure strings are NUL-terminated. Fixes the following gcc 8 warning: inlined from 'register_tape_dev' at drivers/s390/char/tape_class.c:57:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/zcrypt: add copy_from_user length plausibility checksHarald Freudenberger2018-07-022-3/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been identified some places in the zcrypt device driver where copy_from_user() is called but the length value is not explicitly checked. So now some plausibility checks and comments have been introduced there. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/dasd: fix gcc 8 stringop-truncation warningVasily Gorbik2018-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/s390/block/dasd_alias.c:711:2: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] strncpy((char *) &cqr->magic, "ECKD", 4); Replace strncpy to int as a buffer with memcpy. Acked-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/dasd,zfcp: fix gcc 8 stringop-truncation warningsVasily Gorbik2018-07-023-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ccw "busid" should always be NUL-terminated, as evident from e.g. get_ccwdev_by_busid doing "return (strcmp(bus_id, dev_name(dev)) == 0)". Replace all strncpy initializing busid with strlcpy. This fixes the following gcc 8 warnings: drivers/s390/scsi/zfcp_aux.c:104:2: warning: 'strncpy' specified bound 20 equals destination size [-Wstringop-truncation] strncpy(busid, token, ZFCP_BUS_ID_SIZE); drivers/s390/block/dasd_eer.c:316:2: warning: 'strncpy' specified bound 10 equals destination size [-Wstringop-truncation] strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE); drivers/s390/block/dasd_eer.c:359:2: warning: 'strncpy' specified bound 10 equals destination size [-Wstringop-truncation] strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE); drivers/s390/block/dasd_devmap.c:429:3: warning: 'strncpy' specified bound 20 equals destination size [-Wstringop-truncation] strncpy(new->bus_id, bus_id, DASD_BUS_ID_SIZE); Acked-by: Stefan Haberland <sth@linux.ibm.com> Acked-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/scm_blk: correct numa_node in scm_blk_dev_setupVasily Gorbik2018-07-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The numa_node field of the tag_set struct has to be explicitly initialized, otherwise it stays as 0, which is a valid numa node id and cause memory allocation failure if node 0 is offline. Acked-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/dasd: correct numa_node in dasd_alloc_queueVasily Gorbik2018-07-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The numa_node field of the tag_set struct has to be explicitly initialized, otherwise it stays as 0, which is a valid numa node id and cause memory allocation failure if node 0 is offline. Acked-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | Merge branch 'zcrypt' into featuresMartin Schwidefsky2018-06-257-277/+26
| |\ \ \ | | | | | | | | | | | | | | | | | | | | Add the zcrypt base patches into features using a tip branch for parallel merging via multiple tress.
| | * | | s390/zcrypt: Integrate ap_asm.h into include/asm/ap.h.Harald Freudenberger2018-06-255-302/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move all the inline functions from the ap bus header file ap_asm.h into the in-kernel api header file arch/s390/include/asm/ap.h so that KVM can make use of all the low level AP functions. Signed-off-by: Harald Freudenberger <freude@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| | * | | s390/zcrypt: Show load of cards and queues in sysfsHarald Freudenberger2018-06-252-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Show the current load value of cards and queues in sysfs. The load value for each card and queue is maintained by the zcrypt device driver for dispatching and load balancing requests over the available devices. This patch provides the load value to userspace via a new read only sysfs attribute 'load' per card and queue. Signed-off-by: Harald Freudenberger <freude@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| | * | | s390/zcrypt: Review inline assembler constraints.Harald Freudenberger2018-06-251-17/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewed and adapted the register use and asm constraints of the C inline assembler functions in accordance to the the AP instructions specifications. Signed-off-by: Harald Freudenberger <freude@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| | * | | s390/zcrypt: Add ZAPQ inline function.Harald Freudenberger2018-06-251-0/+19
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added new inline function ap_pqap_zapq() which is a C inline function wrapper for the AP PQAP(ZAPQ) instruction. Signed-off-by: Harald Freudenberger <freude@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/decompressor: avoid reusing uncompressed image objectsVasily Gorbik2018-06-251-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-compile ebcdic.c and sclp_early_core.c for the decompressor, using proper decompressor CFLAGS. This also allows to potentially use instrumentation for those files when built for the main kernel image. With kbuild there is no easy way to re-compile a source file from another directory. Bypass ugly rules and Makefile meta-programming with relative path includes of original files. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/qdio: reset old sbal_state flagsJulian Wiedmann2018-06-251-3/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When allocating a new AOB fails, handle_outbound() is still capable of transmitting the selected buffer (just without async completion). But if a previous transfer on this queue slot used async completion, its sbal_state flags field is still set to QDIO_OUTBUF_STATE_FLAG_PENDING. So when the upper layer driver sees this stale flag, it expects an async completion that never happens. Fix this by unconditionally clearing the flags field. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2018-07-062-10/+11
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A few more changes for v4.18: - wire up the two new system calls io_pgetevents and rseq - fix a register corruption in the expolines code for machines without EXRL - drastically reduce the memory utilization of the dasd driver - fix reference counting for KVM page table pages" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up rseq system call s390: wire up io_pgetevents system call s390/mm: fix refcount usage for 4K pgste s390/dasd: reduce the default queue depth and nr of hardware queues s390: Correct register corruption in critical section cleanup
| * | s390/dasd: reduce the default queue depth and nr of hardware queuesStefan Haberland2018-07-022-10/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the default values for the number of hardware queues and queue depth to significantly reduce the memory footprint of a DASD device. The memory consumption per DASD device reduces from approximately 40MB to approximately 1.5MB. This is necessary to build systems with a large number of DASD devices and a reasonable amount of memory. Performance measurements showed that good performance results are possible with the new default values even on systems with lots of CPUs and lots of alias devices. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | s390/qeth: consistently re-enable device featuresJulian Wiedmann2018-06-304-17/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e830baa9c3f0 ("qeth: restore device features after recovery") and commit ce3443564145 ("s390/qeth: rely on kernel for feature recovery") made sure that the HW functions for device features get re-programmed after recovery. But we missed that the same handling is also required when a card is first set offline (destroying all HW context), and then online again. Fix this by moving the re-enable action out of the recovery-only path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: don't clobber buffer on async TX completionJulian Wiedmann2018-06-302-6/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If qeth_qdio_output_handler() detects that a transmit requires async completion, it replaces the pending buffer's metadata object (qeth_qdio_out_buffer) so that this queue buffer can be re-used while the data is pending completion. Later when the CQ indicates async completion of such a metadata object, qeth_qdio_cq_handler() tries to free any data associated with this object (since HW has now completed the transfer). By calling qeth_clear_output_buffer(), it erronously operates on the queue buffer that _previously_ belonged to this transfer ... but which has been potentially re-used several times by now. This results in double-free's of the buffer's data, and failing transmits as the buffer descriptor is scrubbed in mid-air. The correct way of handling this situation is to 1. scrub the queue buffer when it is prepared for re-use, and 2. later obtain the data addresses from the async-completion notifier (ie. the AOB), instead of the queue buffer. All this only affects qeth devices used for af_iucv HiperTransport. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]Vasily Gorbik2018-06-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | *ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: fix race when setting MAC addressJulian Wiedmann2018-06-301-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702af12e ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Revert "s390/qeth: use Read device to query hypervisor for MAC"Julian Wiedmann2018-06-301-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | This reverts commit b7493e91c11a757cf0f8ab26989642ee4bb2c642. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2fd2a2), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91c11a ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by: Michal Kubecek <mkubecek@suse.com> Tested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2018-06-1912-235/+250
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "common I/O layer - Fix bit-fields crossing storage-unit boundaries in css_general_char dasd driver - Avoid a sparse warning in regard to the queue lock - Allocate the struct dasd_ccw_req as per request data. Only for internal I/O is the structure allocated separately - Remove the unused function dasd_kmalloc_set_cda - Save a few bytes in struct dasd_ccw_req by reordering fields - Convert remaining users of dasd_kmalloc_request to dasd_smalloc_request and remove the now unused function vfio/ccw - Refactor and improve pfn_array_alloc_pin/pfn_array_pin - Add a new tracepoint for failed vfio/ccw requests - Add a CCW translation improvement to accept more requests as valid - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: only use preallocated requests s390/dasd: reshuffle struct dasd_ccw_req s390/dasd: remove dasd_kmalloc_set_cda s390/dasd: move dasd_ccw_req to per request data s390/dasd: simplify locking in process_final_queue s390/cio: sanitize css_general_characteristics definition vfio: ccw: add tracepoints for interesting error paths vfio: ccw: set ccw->cda to NULL defensively vfio: ccw: refactor and improve pfn_array_alloc_pin() vfio: ccw: shorten kernel doc description for pfn_array_pin() vfio: ccw: push down unsupported IDA check vfio: ccw: fix error return in vfio_ccw_sch_event s390/archrandom: Rework arch random implementation. s390/net: add pnetid support
| * s390/dasd: only use preallocated requestsSebastian Ott2018-06-124-77/+8
| | | | | | | | | | | | | | | | | | Change the remaining users of dasd_kmalloc_request to use preallocated memory and remove this function. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * s390/dasd: reshuffle struct dasd_ccw_reqSebastian Ott2018-06-121-11/+3
| | | | | | | | | | | | | | | | | | Move some members of struct dasd_ccw_req to get rid of padding bytes. This saves 16 bytes per dasd request. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * s390/dasd: remove dasd_kmalloc_set_cdaSebastian Ott2018-06-121-6/+0
| | | | | | | | | | | | | | | | There is no user of this function. Just remove it. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * s390/dasd: move dasd_ccw_req to per request dataSebastian Ott2018-06-125-47/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | Let the block layer allocate per request data to store struct dasd_ccw_req. We still need extra preallocated memory for usage by ccw programs (which vary in length) and for requests which don't originate from the block layer. Link: https://lkml.kernel.org/r/20180530074130.GA6927@infradead.org Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * s390/dasd: simplify locking in process_final_queueSebastian Ott2018-06-121-27/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | Simplify locking in __dasd_device_process_final_queue to fix the following sparse warning: drivers/s390/block/dasd.c:1902:9: warning: context imbalance in '__dasd_device_process_final_queue' - different lock contexts for basic block Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * Merge tag 'vfio-ccw-20180529' of ↵Martin Schwidefsky2018-06-125-67/+150
| |\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features Pull vfio-ccw from Cornelia Huck with the following changes: - Various fixes and improvements in vfio-ccw, including a first stab at adding tracepoints.
| | * vfio: ccw: add tracepoints for interesting error pathsHalil Pasic2018-05-293-1/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add some tracepoints so we can inspect what is not working as is should. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-5-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| | * vfio: ccw: set ccw->cda to NULL defensivelyDong Jia Shi2018-05-291-11/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's avoid free on ccw->cda that points to a guest address or an already freed memory area by setting it to NULL if memory allocation didn't happen or failed. Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-4-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| | * vfio: ccw: refactor and improve pfn_array_alloc_pin()Dong Jia Shi2018-05-291-46/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This refactors pfn_array_alloc_pin() and also improves it by adding defensive code in error handling so that calling pfn_array_unpin_free() after error return won't lead to problem. This mainly does: 1. Merge pfn_array_pin() into pfn_array_alloc_pin(), since there is no other user of pfn_array_pin(). As a result, also remove kernel-doc for pfn_array_pin() and add/update kernel-doc for pfn_array_alloc_pin() and struct pfn_array. 2. For a vfio_pin_pages() failure, set pa->pa_nr to zero to indicate zero pages were pinned. 3. Set pa->pa_iova_pfn to NULL right after it was freed. Suggested-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-3-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| | * vfio: ccw: shorten kernel doc description for pfn_array_pin()Dong Jia Shi2018-05-291-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel doc description for usage of the struct pfn_array in pfn_array_pin() is unnecessary long. Let's shorten it by describing the contents of the struct pfn_array fields at the struct's definition instead. Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-2-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| | * vfio: ccw: push down unsupported IDA checkHalil Pasic2018-05-291-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is at least one relevant guest OS that doesn't set the IDA flags in the ORB as we would like them, but never uses any IDA. So instead of saying -EOPNOTSUPP when observing an ORB, such that a channel program specified by it could be a not supported one, let us say -EOPNOTSUPP only if the channel program is a not supported one. Of course, the real solution would be doing proper translation for all IDA. This is possible, but given the current code not straight forward. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Jason J. Herne <jjherne@linux.ibm.com> Message-Id: <20180516173342.15174-1-pasic@linux.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| | * vfio: ccw: fix error return in vfio_ccw_sch_eventDong Jia Shi2018-05-291-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the device has not been registered, or there is work pending, we should reschedule a sch_event call again. Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20180502072559.50691-1-bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* | | treewide: Use array_size() in vzalloc()Kees Cook2018-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* | | treewide: kzalloc() -> kcalloc()Kees Cook2018-06-129-23/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-23 03:41:35 +0000