summaryrefslogtreecommitdiffstats
path: root/drivers/serial/cpm_uart
Commit message (Collapse)AuthorAgeFilesLines
* cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.Scott Wood2009-04-061-4/+4
| | | | | | | | | | Previously, if udbg was using the CPM uart, and the normal CPM uart driver was enabled, but the console was directed elsewhere, udbg would not be stopped prior to initialization. This resulted in udbg hanging forever waiting for the CPM to process a descriptor. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Initialize port.dev before it's used.Scott Wood2009-04-061-3/+3
| | | | | | | | Previously, this caused NULL to sometimes be passed as a device to the DMA code. With recent DMA changes, that now causes a BUG(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: fix non-console port startup bugXiaotian Feng2009-03-091-2/+12
| | | | | | | | | | After UART interrupt handler is installed and rx is enabled, if an rx interrupt comes before hardware init, rx->cur will be updated. Then the hardware init will reset BD and make rx->cur out of sync, move the hardware init code before request_irq. Signed-off-by: Xiaotian Feng <xiaotian.feng@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'genirq-v28-for-linus' of ↵Linus Torvalds2008-10-201-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu and x86/uv. The sparseirq branch is just preliminary groundwork: no sparse IRQs are actually implemented by this tree anymore - just the new APIs are added while keeping the old way intact as well (the new APIs map 1:1 to irq_desc[]). The 'real' sparse IRQ support will then be a relatively small patch ontop of this - with a v2.6.29 merge target. * 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits) genirq: improve include files intr_remapping: fix typo io_apic: make irq_mis_count available on 64-bit too genirq: fix name space collisions of nr_irqs in arch/* genirq: fix name space collision of nr_irqs in autoprobe.c genirq: use iterators for irq_desc loops proc: fixup irq iterator genirq: add reverse iterator for irq_desc x86: move ack_bad_irq() to irq.c x86: unify show_interrupts() and proc helpers x86: cleanup show_interrupts genirq: cleanup the sparseirq modifications genirq: remove artifacts from sparseirq removal genirq: revert dynarray genirq: remove irq_to_desc_alloc genirq: remove sparse irq code genirq: use inline function for irq_to_desc genirq: consolidate nr_irqs and for_each_irq_desc() x86: remove sparse irq from Kconfig genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n ...
| * drivers/serial: use nr_irqsYinghai Lu2008-10-161-1/+1
| | | | | | | | | | Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | cpm_uart: Pass actual dev ptr to dma_* in ucc and cpm_uart serialBecky Bruce2008-09-193-6/+9
|/ | | | | | | | We're currently passing NULL, and really shouldn't be. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Add generic clock API support to set baudratesLaurent Pinchart2008-07-282-7/+20
| | | | | | | | | | This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Modem control lines supportLaurent Pinchart2008-07-282-3/+47
| | | | | | | | | | | | This patch replaces the get_mctrl/set_mctrl stubs with modem control line read/write access through the GPIO lib. Available modem control lines are described in the device tree using GPIO bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR, DTR and RI signals. Unused control lines can be left out. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm1: don't send break on TX_STOP, don't interrupt RX/TX when adjusting ↵Nye Liu2008-07-241-7/+14
| | | | | | | | | | | | | | | | | | | termios parameters Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break character. The driver appears to properly re-initialize _brkcr when the SMC is restarted. Do not interrupt RX/TX when the termios is being adjusted; it results in corrupted characters appearing on the line. Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kgdb: kgdboc console poll hooks for cpm uartJason Wessel2008-07-231-1/+94
| | | | | | | | Add in console polling hooks for the cpm uart for use with kgdb and kgdboc. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: galak@kernel.crashing.org
* port_fixups: Fix ups for tty port changesAlan Cox2008-07-221-1/+1
| | | | | | | | I missed the cpm_uart one. Thanks to Kumar Gala for reporting it. A double check found samsung also needed fixing up. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cpm_uart: Support uart_wait_until_sent()Laurent Pinchart2008-07-141-0/+6
| | | | | | | | | | Set port->fifosize to the software FIFO size, and update the port timeout when the baud rate is modified. SCC ports have an optional 32 byte hardware FIFO which is currently not taken into account, as there is no documented way to check when the FIFO becomes empty. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Fix cpm uart corruption with PREEMPT_RTRune Torgersen2008-07-141-0/+14
| | | | | | | | | Fix CPM serial port corruption when running with CONFIG_PREEMPT_RT. Userland usage of console, and kernel printf's were stepping on each others toes. Also only take lock if not in an oops. Signed-off-by: Rune Torgersen <runet@innovsys.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING codeKumar Gala2008-06-266-838/+1
| | | | | | | Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: fix whitespace issuesKumar Gala2008-06-266-12/+12
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* serial: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-301-1/+1
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms.Laurent Pinchart2008-04-174-10/+78
| | | | | | | | | | | | | | | | | | | This patch allocates parameter RAM for SMC serial ports without relying on previous initialisation by a boot loader or a wrapper layer. SMC parameter RAM on CPM2-based platforms can be allocated anywhere in the general-purpose areas of the dual-port RAM. The current code relies on the boot loader to allocate a section of general-purpose CPM RAM and gets the section address from the device tree. This patch modifies the device tree address usage to reference the SMC parameter RAM base pointer instead of a pre-allocated RAM section and allocates memory from the CPM dual-port RAM when initialising the SMC port. CPM1-based platforms are not affected. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Remove pointless casts from void pointersJeff Garzik2008-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.cJochen Friedrich2008-01-281-1/+1
| | | | | | | | | Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix compile error if CONFIG_STX_GP3 is definedKumar Gala2008-01-231-1/+1
| | | | | | | cpmux is need in all cases, having wrapped by the ifndef CONFIG_STX_GP3 was causing a compile error. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Move CPM command handling into the cpm driversJochen Friedrich2007-12-132-12/+2
| | | | | | | | | | | This patch moves the CPM command handling into commproc.c for CPM1 and cpm2_common.c. This is yet another preparation to get rid of drivers accessing the CPM via the global cpmp. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
* [POWERPC] cpm: Describe multi-user ram in its own device node.Scott Wood2007-10-041-2/+2
| | | | | | | | | | | | | | | | | | | | | The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] cpm_uart: Issue STOP_TX command before initializing console.Scott Wood2007-10-031-0/+3
| | | | | | | This prevents some bootloader/bootwrapper characters from being lost. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] cpm_uart: sparse fixesScott Wood2007-10-036-183/+192
| | | | | | | | Mostly a bunch of direct access to in/out conversions, plus a few cast removals, __iomem annotations, and miscellaneous cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING ↵Scott Wood2007-10-036-25/+260
| | | | | | | | | | | | | | | | is set. The existing OF glue code was crufty and broken. Rather than fix it, it has been removed, and the serial driver now talks to the device tree directly. The non-CONFIG_PPC_CPM_NEW_BINDING code can go away once CPM platforms are dropped from arch/ppc (which will hopefully be soon), and existing arch/powerpc boards that I wasn't able to test on for this patchset get converted (which should be even sooner). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix cpm_uart driver for cpm1 machinesJochen Friedrich2007-09-281-1/+1
| | | | | | | | | | | in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp. On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't be used for arithmetric compare operations with virtual addresses returned by cpm_dpram_addr. This patch changes the assignment to use cpm_dpram_addr as well, like in cpm_uart_cpm2.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM_UART: Use inline function form of eieioKumar Gala2007-07-101-1/+1
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warningKumar Gala2007-05-093-3/+3
| | | | | | | | | cpm_uart_init_portdesc is referenced from non-init code and thus we were getting the following warning: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:cpm_uart_init_portdesc from .text between 'cpm_uart_init' (at offset 0x18020) and 'cpm_uart_drv_remove' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM_UART: cpm_uart_set_termios should take ktermios, not termiosScott Wood2007-05-091-1/+2
| | | | | | | This eliminates some warnings. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Change rheap functions to use ulongs instead of pointersTimur Tabi2007-05-092-4/+4
| | | | | | | | | | | | | | | | | | | | The rheap allocation functions return a pointer, but the actual value is based on how the heap was initialized, and so it can be anything, e.g. an offset into a buffer. A ulong is a better representation of the value returned by the allocation functions. This patch changes all of the relevant rheap functions to use a unsigned long integers instead of a pointer. In case of an error, the value returned is a negative error code that has been cast to an unsigned long. The caller can use the IS_ERR_VALUE() macro to check for this. All code which calls the rheap functions is updated accordingly. Macros IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE(). Also added error checking to rh_attach_region(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* SPIN_LOCK_UNLOCKED cleanup in drivers/serialMilind Arun Choudhary2007-05-081-6/+6
| | | | | | | | SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] Fix compile failure in cpm_uart_cpm2Paul Gortmaker2007-02-161-1/+1
| | | | | | | | Fix bug that exists in kernel.org since 2.6.17rc4 - compiles fail if CONFIG_SERIAL_CPM_SMC is defined. Tested on a board using SMC1 console. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560adsVitaly Bordug2007-02-072-6/+0
| | | | | | | | | | | | | | | | | | | | Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the current kernel. Current patch fixes it, as well as other inconsistencies expressed, that do not permit targets from working properly: - Updated dts with a chosen node with interrupt controller, - fixed messed device IDs among CPM2 SoC devices, - corrected odd header name and fixed type in defines, - Added 82xx subdir to the powerpc/platforms Makefile, missed during initial commit, - new solely-powerpc header file for 8260 family (was using one from arch/ppc, this one cleaned up from the extra stuff), in fact for now a placeholder to get the board-specific includes for stuff not yet capable to live with devicetree peeks only - Fixed couple of misprints in reference mpc8272 dts. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] cpm_uart: OF-related fix for CPM1Vitaly Bordug2007-02-071-7/+8
| | | | | | | | | | This makes cpm uart able to work using OF-passed parameters in case of CPM stuff (found on most mpc8xx reference and custom boards). The idea is to keep ppc stuff working yet making it able to be used for powerpc. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM_UART: Fix inconsistency of function definitionKalle Pokki2006-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | The below hunk was missed from the recent patch, and now, there are somewhat inconsistent definitions: in cpm_uart.h: int __init cpm_uart_init_portdesc(void); in cpm_uart_cpm1.c: int __init cpm_uart_init_portdesc(void) { } in cpm_uart_cpm2.c: int cpm_uart_init_portdesc(void) { } Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM_UART: Fix non-console initialisationKalle Pokki2006-11-103-7/+8
| | | | | | | | | | The cpm_uart driver is initialised incorrectly, if there is a frame buffer console, and CONFIG_SERIAL_CPM_CONSOLE is defined. The driver fails to call cpm_uart_init_portdesc() and set_lineif() in this case. Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM_UART: Fix non-console transmitKalle Pokki2006-11-101-3/+2
| | | | | | | | | | | | | | | | | The SMC and SCC hardware transmitter is enabled at the wrong place. Simply writing twice to the non-console port, like $ echo asdf > /dev/ttyCPM1 $ echo asdf > /dev/ttyCPM1 puts the shell into endless uninterruptible sleep, since the transmitter is stopped after the first write, and is not enabled before the shutdown function of the second write. Thus the transmit buffers are never emptied. Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* Remove all inclusions of <linux/config.h>Dave Jones2006-10-041-1/+0
| | | | | | kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
* fix file specification in commentsUwe Zeisberger2006-10-032-2/+2
| | | | | | | Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* POWERPC: Bring the fs_no calculation to the relevant SoC enumerationVitaly Bordug2006-09-211-3/+6
| | | | | | | | | | | | | | The fs_no mean used to be fs_enet driver driven, hence it was an enumeration across all the possible fs_enet "users" in the SoC. Now, with QE on the pipeline, and to make DTS descriptions more clear, fs_no features relevant SoC part number, with additional field to describe the SoC type. Another reason for that is now not only fs_enet is going to utilize those stuff. There might be UART, HLDC, and even USB, so to prevent confusion and be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were updated in that concern, as well as the relevant DTS. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* POWERPC: overhaul with cpm2_map mechanismVitaly Bordug2006-09-211-2/+2
| | | | | | | | | Incorporating the new way of cpm2 immr access, introduced in the previous patch, into CPM2 peripheral devices (fs_enet and cpm_uart). Both ppc and powerpc approved working( real actions taken in powerpc only, ppc just has a wrapper to keep init stuff consistent). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* POWERPC: Get rid of remapping the whole immrVitaly Bordug2006-09-212-44/+88
| | | | | | | | | | | | | | | | | The stuff below cleans up the code attempting to remap the whole cpm2_immr early, as well as places happily assuming that fact. This is more like the 2.4 legacy stuff, and is at least confusing and unclear now. To keep the world comfortable, a new mechanism is introduced: before accessing specific immr register/register set, one needs to map it, using cpm2_map(<reg>), for instance, access to CPM command register will look like volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); keeping the code clear, yet without "already defined somewhere" cpm2_immr. So far, unmapping code is not implemented, but it's not a big deal to add it, if the whole idea makes sense. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* cpm_uart: make it possible to utilize from powerpcVitaly Bordug2006-09-212-13/+11
| | | | | | | | Driver core has been updated to make use of the new powerpc OF-inspired platform devices, yet keeping compatibility to the vast board list from ppc. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-303-3/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] ppc32 CPM_UART: various fixes for pq2 uart usersVitaly Bordug2006-05-262-4/+6
| | | | | | | | | | | | This fixes various odd things that missed update together with cpm_uart platform_device move. Unified resources names, restructurisation, etc. Also, addressed issue with recent phys/virt translation rework. Being cache-coherent, CPM2's do alloc_bootmem() for the console stuff, and it was used to treat console buffer descriptor mapping 1:1 (as in CPM1 case), which is definitely wrong. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: fixes and improvementsVitaly Bordug2006-05-034-11/+43
| | | | | | | | | | | A number of small issues are fixed, and added the header file, missed from the original series. With this, driver should be pretty stable as tested among both platform-device-driven and "old way" boards. Also added missing GPL statement , and updated year field on existing ones to reflect code update. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: Fixed break send on SCCVitaly Bordug2006-05-031-1/+5
| | | | | | | | | | | SCC uart sends a break sequence each time it is stopped with the CPM_CR_STOP_TX command. That means that each time an application closes the serial device, a break is transmitted. To fix this, graceful tx stop is issued for SCC. Signed-off-by: David Jander <david.jander@protonic.nl> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: Fixed odd address translationsVitaly Bordug2006-04-284-26/+50
| | | | | | | | | | | Current address translation methods can produce wrong results, because virt_to_bus and vice versa may not produce correct offsets on dma-allocated memory. The right way is, while tracking both phys and virt address of the window that has been allocated for boffer descriptors, and use those numbers to compute the offset and make translation properly. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: Convert to use platform devicesVitaly Bordug2006-04-284-111/+220
| | | | | | | | | | | This is intended to make the driver code more generic and flexible, to get rid of board-specific layouts within driver, and generic rehaul, yet keeping compatibility with the existing stuff utilizing it, being compatible with legacy behavior (but with complaints that legacy mode used). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 00:29:04 +0000