summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-mxs.c
Commit message (Collapse)AuthorAgeFilesLines
* spi: mxs: fix reference leak in mxs_spi_probeZhang Qilong2020-11-181-0/+1
| | | | | | | | | | | pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in mxs_spi_probe, so we should fix it. Fixes: b7969caf41a1d ("spi: mxs: implement runtime pm") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201106012421.95420-1-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mxs: Drop GPIO includesLinus Walleij2020-03-171-2/+1
| | | | | | | | | | | | | This driver is not using any symbols from the GPIO .h files so drop them. It was however implicitly using <linux/pinctrl/consumer.h> so include that instead. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200317092457.264055-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mxs: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi2019-12-161-3/+3
| | | | | | | | | | | | dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191212135550.4634-6-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mxs: use devm_platform_ioremap_resource() to simplify codeYueHaibing2019-09-041-3/+1
| | | | | | | | | | Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190904135918.25352-19-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mxs: add tracing to custom .transfer_one_message callbackUwe Kleine-König2019-01-291-0/+5
| | | | | | | | | Driver specific implementations for .transfer_one_message need to call the tracing stuff themself. This is necessary to make spi tracing actually useful. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mxs: Switch to SPDX identifierFabio Estevam2018-05-031-29/+19
| | | | | | | | | Adopt the SPDX license identifier headers to ease license compliance management. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mxs: implement runtime pmUwe Kleine-König2017-09-271-10/+110
| | | | | | | | | This is a straight forward addition of runtime and system sleep pm operations that handle clk and pinctrl (for runtime pm) and spi_master_{suspend,resume} (for system sleep). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mxs: cleanup wait_for_completion return handlingNicholas Mc Guire2015-02-051-3/+2
| | | | | | | | | return type of wait_for_completion_timeout is unsigned long not int, this patch uses the return value of wait_for_completion_timeout in the condition directly rather than adding a additional appropriately typed variable. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-141-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| * spi: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0
| | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter listCharles Keepax2014-11-241-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can only use page_address on memory that has been mapped using kmap, when the buffer passed to the SPI has been allocated by vmalloc the page has not necessarily been mapped through kmap. This means sometimes page_address will return NULL causing the pointer we pass to sg_init_one to be invalid. Currently, this issue doesn't show up on the MXS architecture as the defconfig defines CONFIG_HIGHMEM=n which means all pages are mapped. For the sake of robustness though it is best to correct the issue. As we only call page_address so that we can pass a virtual address to sg_init_one which will eventually call virt_to_page on it, fix this by calling sg_set_page directly rather then relying on the sg_init_one helper. Note this patch is only build tested as I don't have an MXS system to test on. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: spi-mxs: Register the irq with the device nameFabio Estevam2014-11-101-1/+1
|/ | | | | | | | | | | | | | Instead of registering the irq name with the driver name, it's better to pass the device name so that we have a more explicit indication as to what spi instance the irq is related: $ cat /proc/interrupts CPU0 ... 27: 0 - 98 80014000.ssp Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'spi/topic/fsl-dspi', 'spi/topic/imx', ↵Mark Brown2014-10-031-1/+1
|\ \ | | | | | | | | | 'spi/topic/mxs', 'spi/topic/omap-100k' and 'spi/topic/orion' into spi-next
| | * spi: spi-mxs: fix a tiny typo in a commentMichael Heimpold2014-10-031-1/+1
| |/ | | | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* / spi: spi-mxs: Fix checkpatch issueJingoo Han2014-09-021-1/+3
|/ | | | | | | | | | | Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations WARNING: Prefer kcalloc over kzalloc with multiply Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/init', ↵Mark Brown2014-03-301-4/+3
|\ \ | | | | | | | | | 'spi/topic/mpc512x-psc', 'spi/topic/mpc52xx', 'spi/topic/mxs', 'spi/topic/nuc900', 'spi/topic/oc-tiny' and 'spi/topic/octeon' into spi-next
| | * spi: spi-mxs: Propagate the real error code on platform_get_irq() failureFabio Estevam2014-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to return a 'fake' return value on platform_get_irq() failure. Just return the error code itself instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * spi: mxs: Use list_for_each_entry to iterate over transfer listAxel Lin2014-02-071-2/+2
| |/ |/| | | | | | | | | | | | | | | We don't modify the list entry while iterating the transfer list. So use list_for_each_entry instead of list_for_each_entry_safe. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-02-031-1/+0
|/ | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: Remove duplicate code to set default bits_per_word settingAxel Lin2014-01-171-9/+0
| | | | | | | | | | | | The implementation in spi_setup() already set spi->bits_per_word = 8 when spi->bits_per_word is 0 before calling spi->master->setup. So we don't need to do it again in setup() callback. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Barry Song <Baohua.Song@csr.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@linaro.org>
*-. Merge remote-tracking branches 'spi/fix/bcm2835', 'spi/fix/bcm63xx', ↵Mark Brown2013-11-281-1/+1
|\ \ | | | | | | | | | 'spi/fix/mpc512x-psc', 'spi/fix/mxs', 'spi/fix/pxa2xx', 'spi/fix/qspi', 'spi/fix/rspi' and 'spi/fix/txx9' into spi-linus
| | * spi: spi-mxs: fix reference leak to master in mxs_spi_remove()Wei Yongjun2013-11-181-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 33e195acf268 ('spi: mxs: use devm_spi_register_master()') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
* / tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang2013-11-151-1/+1
|/ | | | | | | | | | | | Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge remote-tracking branch 'spi/topic/mxs' into spi-nextMark Brown2013-10-251-109/+80
|\
| * spi: spi-mxs: Use u32 instead of uint32_tTrent Piepho2013-10-181-5/+5
| | | | | | | | | | | | | | | | | | | | It's consistent with all the other spi drivers that way. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Don't set clock for each xferTrent Piepho2013-10-181-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mxs_spi_setup_transfer() would set the SSP SCK rate every time it was called, which is before every transfer. It is uncommon for the SCK rate to change between transfers (or at all of that matter) and this causes many unnecessary reprogrammings of the clock registers. Code changed to only set the rate when it changes. This significantly speeds up short SPI messages, especially messages made up of many transfers, as the calculation of the clock divisors is rather costly. On an iMX287, using spidev with messages that consist of 511 transfers of 4 bytes each at an SCK of 48 MHz, the effective transfer rate more than doubles from about 290 KB/sec to 600 KB/sec! Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Clean up setup_transfer functionTrent Piepho2013-10-181-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It can't be called with a NULL transfer anymore so it can be simplified to not check for that. Fix indention of line-wrapped code to Linux standard. The transfer pointer can be const. It's not necessary to check if the spi_transfer's speed_hz is zero, as the spi core also fills it in from the spi_device. However, the spi core does not check if spi_device's speed is zero so we have to do that still. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Remove check of spi mode bitsTrent Piepho2013-10-181-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | The spi core already checks for a slave setting mode bits that we didn't list as supported when the master was registered. There is no need to do it again in the master driver. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Fix race in setup methodTrent Piepho2013-10-181-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Despite many warnings in the SPI documentation and code, the spi-mxs driver sets shared chip registers in the ->setup method. This method can be called when transfers are in progress on other slaves controlled by the master. Setting registers or any other shared state will corrupt those transfers. So fix mxs_spi_setup() to not call mxs_spi_setup_transfer(). mxs_spi_setup_transfer() is already called for each transfer when they are actually performed in mxs_spi_transfer_one(), so the call in mxs_spi_setup() isn't necessary to setup anything. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Remove bogus setting of ssp clk rate fieldTrent Piepho2013-10-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ssp struct has a clock rate field, to provide the actual value, in Hz, of the SSP output clock (the rate of SSP_SCK) after mxs_ssp_set_clk_rate() is called. It is set by mxs_ssp_set_clk_rate(), for SSP using drivers (like SPI and MMC) to *read* if they want to know the actual clock rate. The SPI driver isn't supposed to *write* to it. For some reason the spi-mxs driver decides to write to this field on init, and sets it to the value of the SSP input clock (clk_sspN, from the MXS clocking block) in kHz. It shouldn't be setting the value, and certainly shouldn't be setting it with the wrong clock in the wrong units. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Remove full duplex check, spi core already does itTrent Piepho2013-10-181-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | Because the driver sets the SPI_MASTER_HALF_DUPLEX flag, the spi core will check transfers to insure they are not full duplex. It's not necessary to check that in the spi-mxs driver as well. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Fix chip select control bits in DMA modeTrent Piepho2013-10-181-23/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In DMA mode the chip select control bits would be ORed into the CTRL0 register without first clearing the bits. This means that after addressing slave 1, the CTRL0 bit to address slave 1 would be still be set when addressing slave 0, resulting in slave 1 continuing to be addressed. The message handling function would pass the CS value to the txrx function, which would re-program the bits on each transfer in the message. The selected CS does not change during a message so this is inefficient. It also means there are two different sets of code for selecting the CS, one for PIO that worked and one for DMA that didn't. Change the code to set the CS bits in the message handling function once. Now the DMA and PIO txrx functions don't need to care about CS at all. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Fix extra CS pulses and read mode in multi-transfer messagesTrent Piepho2013-10-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two bits which control the CS line in the CTRL0 register: LOCK_CS and IGNORE_CRC. The latter would be better named DEASSERT_CS in SPI mode. Setting DEASSERT_CS causes CS to be de-asserted at the end of the transfer. It should normally be set only for the final segment of the final transfer. The DMA code explicitly sets it in this case, but because it never clears the bit from the ctrl0 register, it will remain set for all transfers in subsequent messages. This results in a CS pulse between transfers. There is a similar problem with the read mode bit never being cleared in DMA mode. This patch fixes DEASSERT_CS and READ being left on in DMA mode. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Change flag arguments in txrx functions to bit flagsTrent Piepho2013-10-181-24/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are three flag arguments to the PIO and DMA txrx functions. Two are passed as pointers to integers, even though they are input only and not modified, which makes no sense to do. The third is passed as an integer. The compiler must use an argument register or stack variable for each flag this way. Using bitflags in a single flag argument is more efficient and produces smaller code, since all the flags can fit in a single register. And all the flag arguments get cumbersome, especially when more are added for things like GPIO chipselects. The "first" flag is never used, so can just be deleted. The "last" flag is renamed to DEASSERT_CS, since that's really what it does. The spi_transfer cs_change flag means that CS might be de-asserted on a transfer which is not last and not de-assert on the last transfer, so it is not which transfer is the last we need to know but rather the transfers after which CS should be de-asserted. This also extends the driver to not ignore cs_change when setting the DEASSERT_CS nee "last" flag. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Always clear INGORE_CRC, to keep CS assertedTrent Piepho2013-10-181-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INGORE_CRC, better named DEASSERT_CS, should be cleared on all tranfers except the last. So instead of only clearing it on the first transfer, we can just always clear it. It will set on the last transfer. This removes the only use of the "first" flag in the transfer functions, so that flag can be then be removed. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Remove mxs_spi_enable and mxs_spi_disableTrent Piepho2013-10-181-18/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These functions consist of nothing but one single writel call and are only called once. And the names really aren't accurate or clear, since they don't enable or disble SPI. Rather they set the bit that controls the state of CS at the end of transfer. It easier to follow the code to just set this bit with a writel() along with all the other bits being set in the same function. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| * spi: spi-mxs: Always set LOCK_CSTrent Piepho2013-10-181-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two bits which control the CS line in the CTRL0 register: LOCK_CS and IGNORE_CRC. The latter would be better named DEASSERT_CS in SPI mode. LOCK_CS keeps CS asserted though the entire transfer. This should always be set. The DMA code will always set it, explicitly on the first segment of the first transfer, and then implicitly on all the rest by never clearing the bit from the value read from the ctrl0 register. The PIO code will explicitly set it for the first transfer, leave it set for intermediate transfers, and then clear it for the final transfer. It should not clear it. The only reason to not set LOCK_CS would be to attempt an altered protocol where CS pulses between each word. Though don't get your hopes up if you want to do this, as the hardware doesn't appear to do this in any sane manner. It appears to be related to the hardware FIFO fill level. The code can be simplified by just setting LOCK_CS once and then not needing to deal with it at all in the PIO and DMA transfer functions. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
* | spi: mxs: use devm_spi_register_master()Jingoo Han2013-09-261-3/+1
|/ | | | | | | | Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: spi-mxs: Remove unused bits_per_word variableAxel Lin2013-08-061-5/+0
| | | | | | | | | The bits_per_word variable is not used after commit 24778be20f8 "spi: convert drivers to use bits_per_word_mask". Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: spi-mxs: Remove unneeded check for platform_get_resource()Fabio Estevam2013-07-221-1/+1
| | | | | | | | | As devm_ioremap_resource() is used on probe, there is no need to explicitly check the return value from platform_get_resource(), as this is something that devm_ioremap_resource() takes care by itself. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: spi-mxs: Check the return value from stmp_reset_block()Fabio Estevam2013-07-151-1/+3
| | | | | | | | | stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: spi-mxs: Check the return value from clk_prepare_enable()Fabio Estevam2013-07-151-3/+7
| | | | | | | | | | | | clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. While at it, rename 'out_free_dma' to 'out_disable_clk' so that it can properly describe its purpose. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: spi-mxs: Fix the error path sequenceFabio Estevam2013-07-151-5/+2
| | | | | | | | | | | | On mxs_spi_probe() the dma channels are requested prior to enabling the SSP clock, so in the error path we should disable the SSP clock first and release the DMA channels later. Same logic applies in mxs_spi_remove(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* Merge remote-tracking branch 'spi/topic/mxs' into spi-nextMark Brown2013-06-261-6/+0
|\
| * spi: spi-mxs: Let device core handle pinctrlFabio Estevam2013-05-131-6/+0
| | | | | | | | | | | | | | | | | | | | Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | spi: convert drivers to use bits_per_word_maskStephen Warren2013-05-291-6/+1
|/ | | | | | | | | | Fill in the recently added spi_master.bits_per_word_mask field in as many drivers as possible. Make related cleanups, such as removing any redundant error-checking, or empty setup callbacks. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge tag 'dt-for-linus-2' of ↵Linus Torvalds2013-05-071-51/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
| * spi: mxs-spi: move to use generic DMA helperShawn Guo2013-04-041-51/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | With the generic DMA device tree helper supported by mxs-dma driver, client devices only need to call dma_request_slave_channel() for requesting a DMA channel from dmaengine. Since mxs is a DT only platform now, along with the changes, the non-DT case handling in probe function also gets removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* | mxs/spi: fix error return code in mxs_spi_probe()Wei Yongjun2013-04-031-0/+1
|/ | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds2013-02-211-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 19:51:38 +0000