summaryrefslogtreecommitdiffstats
path: root/drivers/spi
Commit message (Collapse)AuthorAgeFilesLines
* spi: fix refcount-related spidev oops-on-rmmodDavid Brownell2008-06-061-30/+34
| | | | | | | | | | | | | | | | | | | This addresses other oopsing paths in "spidev" by changing how it manages refcounting. It decouples the lifecycle of the per-device data from the class device (not just the spi device): - Use class_{create,destroy} not class_{register,unregister}. - Use device_{create,destroy} not device_{register,unregister}. - Free the per-device data only when TWO conditions are true: * Driver is unbound from underlying SPI device, and * Device is no longer open (new) Also, spi_{get,set}_drvdata not dev_{get,set}_drvdata for simpler code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Sebastian Siewior <bigeasy@tglx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: remove some spidev oops-on-rmmod pathsDavid Brownell2008-05-241-13/+89
| | | | | | | | | | | | | | | | | | | | Somehow the spidev code forgot to include a critical mechanism: when the underlying device is removed (e.g. spi_master rmmod), open file descriptors must be prevented from issuing new I/O requests to that device. On penalty of the oopsing reported by Sebastian Siewior <bigeasy@tglx.de> ... This is a partial fix, adding handshaking between the lower level (SPI messaging) and the file operations using the spi_dev. (It also fixes an issue where reads and writes didn't return the number of bytes sent or received.) There's still a refcounting issue to be addressed (separately). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Reported-by: Sebastian Siewior <bigeasy@tglx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mpc5200_psc_spi: typo fix in header blockGrant Likely2008-05-141-1/+1
| | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_mpc83xx: much improved driverJoakim Tjernlund2008-05-132-130/+282
| | | | | | | | | | | | | | | | | | | | The current driver may cause glitches on SPI CLK line since one must disable the SPI controller before changing any HW settings. Fix this by implementing a local spi_transfer function that won't change speed and/or word size while CS is active. While doing that heavy lifting a few other issues were addressed too: - Make word size 16 and 32 work too. - Honor bits_per_word and speed_hz in spi transaction. - Optimize the common path. This also stops using the "bitbang" framework (except for a few constants). [Roel Kluin <12o3l@tiscali.nl>: "irq" needs to be signed] Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: pxa2xx_spi clock resume bugfixEric BENARD2008-05-131-1/+1
| | | | | | | | | | | There is a typo in pxa2xx_spi.c, comment says "Enable the SSP clock", code says: clk_disable ... so after resume, the SSP is dead. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ned Forrester <nforrester@whoi.edu> Cc: Stephen Street <stephen@streetfiresound.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_s3c24xx signedness fixMatthew Wilcox2008-05-011-3/+3
| | | | | | | | | | | | | | | | | | | | On Fri, Apr 18, 2008 at 09:08:55PM +0200, Julia Lawall wrote: > I found 63 occurrences of this problem with the following semantic match > (http://www.emn.fr/x-info/coccinelle/): > > @@ unsigned int i; @@ > > * i < 0 > Since this one's always in the range 0-255, it could probably be made signed, but it's just as easy to make it work unsigned. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bfin5xx: use PIO for full duplex, not DMAVitja Makarov2008-05-011-2/+5
| | | | | | | | | | Use PIO for full-duplex transfers, instead of DMA. Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_spi: clean up baud rate divisor calculationHaavard Skinnemoen2008-04-301-9/+20
| | | | | | | | | | | | | | | Make the baud rate divisor calculation code a bit more readable and add a few comments. Also fix wrong debug information being displayed when !new_1 and max_speed_hz == 0. [david-b@pacbell.net: fix it] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: "Janesh Ramakrishnan" <jramakrishnan@neuropace.com> Acked-by David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_imx updatesAndrea Paterniani2008-04-281-109/+114
| | | | | | | | | | | | | | | | | | | | | | | | Updates to the i.MX SPI controller driver: 1) Some comments changed and/or added. 2) End of transfers is now managed on TXFIFO empty interrupt after the last write to TXFIFO. This speeds interrupt execution by removing the wait for TXFIFO to become empty. On TXFIFO empty interrupt the handler needs only to poll for the end of the ongoing transaction (SPI_CONTROL_XCH) to close the transfer. (2.1) Write only transfers are closed flushing RXFIFO. (2.2) Read transfers are closed reading trailing bytes from RXFIFO. (2.3) Read transfers where RXFIFO overrun occurred are closed by flushing RXFIFO and aborting the message. 3) Fifos are now flushed via SPI disable after the end of ongoing transaction. Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_spi: support zero length transferAtsushi Nemoto2008-04-281-1/+1
| | | | | | | | | | | | A spi transfer with zero length is not invalid. For example, such transfer (len == 0 && delay_usecs != 0) can be used to achieve delay before first CLK edge after chipselect assertion. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-285-9/+9
| | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: pxa2xx_spi "sparse" fixesDavid Brownell2008-04-281-24/+28
| | | | | | | | | | | | Various cleanups to pxa2xx_spi suggested by "sparse": make sure that register addresess are "void __iomem *", and make a few functions properly static. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ned Forrester <nforrester@whoi.edu> Cc: Stephen Street <stephen@streetfiresound.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: use menuconfig for CONFIG_SPIAlessandro Guido2008-04-281-7/+6
| | | | | | | Signed-off-by: Alessandro Guido <alessandro.guido@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_s3c24xx must initialize num_chipselectBen Dooks2008-04-151-0/+4
| | | | | | | | | | | | | The SPI core now expects num_chipselect to be set correctly as due to added checks on the chip being selected before an transfer is allowed. This patch adds a num_cs field to the platform data which needs to be set correctly before adding the SPI platform device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_s3c24xx must initialize bus_numBen Dooks2008-04-151-6/+7
| | | | | | | | | | Pass the bus number we expect the S3C24XX SPI driver to attach to via the platform data. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_s3c24xx driver must init completionBen Dooks2008-04-151-0/+3
| | | | | | | | | | | The s3c24xx_spi_txrx() function should initialise the completion each time before using it, otherwise we end up with the possibility of returning success before the interrupt handler has processed all the data. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: fix platform driver hotplug/coldplugKay Sievers2008-04-1114-7/+31
| | | | | | | | | | | | Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable SPI platform drivers, to allow module auto loading. [dbrownell@users.sourceforge.net: more drivers: registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_bfin5xx: remove unused labelMichael Hennerich2008-04-081-1/+0
| | | | | | | | | | Remove unused label, and associated compiler warning. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_bfin5xx: fix probe() sequencingVitja Makarov2008-04-081-6/+6
| | | | | | | | | | | | Fix bug in SPI probe: first initialize peripheral pins, and just after register spi master device. This fixes problems with SPI drivers built-in kernel. Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_bfin5xx build fixMike Frysinger2008-04-081-2/+2
| | | | | | | | | | | Fix breakage cause by overzealous line wrapping; there should be only one format string. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bitbang: short transfer status fixJan Nikitenko2008-03-131-3/+5
| | | | | | | | | | | | | | | | | | | SPI controller drivers return number of bytes actually transfered from bitbang->txrx_bufs() method. This updates handling of short transfers (where the transfer size is less than requested): - Even zero byte short transfers should report errors; - Include short transfers in the total of transferred bytes; - Use EREMOTEIO (like USB) not EMSGSIZE to report short transfers Short transfers don't normally mean invalid message sizes, but if the underlying controller driver needs to use EMSGSIZE it can still do so. [db: fix two more minor issues] Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* au1550_spi: fix prototype of irq handlerJan Nikitenko2008-03-131-2/+2
| | | | | | | | | | Remove struct pt_regs *regs from prototype of au1550_spi_irq handler to avoid warning in request_irq(). Also fix comment type leadin. Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc: mpc5200: fix build error on mpc52xx_psc_spi device driverGrant Likely2008-03-041-3/+8
| | | | | | | | | | | | | | | | | Commit id 94f389485e27641348c1951ab8d65157122a8939 (Separate MPC52xx PSC FIOF regsiters from the rest of PSC) split the PSC fifo registers away from the core PSC regs. Doing so broke the mpc52xx_psc_spi driver. This patch teaches the mpc52xx_psc_spi driver about the new PSC fifo register definitions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <david-b@pacbell.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: pxa2xx_spi clock polarity fixNed Forrester2008-02-231-14/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | Fixes a sequencing bug in spi driver pxa2xx_spi.c in which the chip select for a transfer may be asserted before the clock polarity is set on the interface. As a result of this bug, the clock signal may have the wrong polarity at transfer start, so it may need to make an extra half transition before the intended clock/data signals begin. (This probably means all transfers are one bit out of sequence.) This only occurs on the first transfer following a change in clock polarity in systems using more than one more than one such polarity. The fix assures that the clock mode is properly set before asserting chip select. This bug was introduced in a patch merged on 2006/12/10, kernel 2.6.20. The patch defines an additional bit in: include/asm-arm/arch-pxa/regs-ssp.h for 2.6.25 and newer kernels but this addition must be made in: include/asm-arm/arch-pxa/pxa-regs.h for kernels between 2.6.20 and 2.6.24, inclusive Signed-off-by: Ned Forrester <nforrester@whoi.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_spi: fix clock polarityAtsushi Nemoto2008-02-231-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The atmel_spi driver does not initialize clock polarity correctly (except for at91rm9200 CS0 channel) in some case. The atmel_spi driver uses gpio-controlled chipselect. OTOH spi clock signal is controlled by CSRn.CPOL bit, but this register controls clock signal correctly only in 'real transfer' duration. At the time of cs_activate() call, CSRn.CPOL will be initialized correctly, but the controller do not know which channel is to be used next, so clock signal will stay at the inactive state of last transfer. If clock polarity of new transfer and last transfer was differ, new transfer will start with wrong clock signal state. For example, if you started SPI MODE 2 or 3 transfer after SPI MODE 0 or 1 transfer, the clock signal state at the assertion of chipselect will be low. Of course this will violates SPI transfer. This patch is short term solution for this problem. It makes all CSRn.CPOL match for the transfer before activating chipselect. For longer term, the best fix might be to let NPCS0 stay selected permanently in MR and overwrite CSR0 with to the new slave's settings before asserting CS. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: remove more dev->power.power_state usageDavid Brownell2008-02-062-28/+0
| | | | | | | | | | | Remove some more references to dev->power.power_state. That field is overdue for removal, but we can't do that while it's still referenced in the kernel. The only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bfin: headers are not for changelogsMike Frysinger2008-02-061-29/+3
| | | | | | | | | | | Use simpler comment headers, and strip out information that is maintained in GIT history Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bfin: wait for tx to complete on write pathsSonic Zhang2008-02-061-12/+10
| | | | | | | | | | SPI writes should also not return until the last bit is sent. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bfin: wait for tx to complete on full duplex pathsBryan Wu2008-02-061-15/+3
| | | | | | | | | | | | | Full duplex SPI operation should not read a dummy byte at the first transfer. Bug and fix by Jean-Christian de Rivaz <jc@eclis.ch>: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3678 Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bfin: wait for tx to complete on some cs_chg pathsBryan Wu2008-02-061-28/+12
| | | | | | | | | | | | | PBX 2 SPI devices need the nonstandard "cs change per word" mechanism. This patch is one of three updating this driver to make the last data bits get sent before advancing the transfer ... in this case, before the chipselect gets deactivated. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bfin: use more useful GPIO labelsBryan Wu2008-02-061-1/+1
| | | | | | | | | | | Use the SPI driver's name when requesting gpio lines. When there are gpio conflicts, this helps to narrow down the problems; "bfin-spi" is not informative. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi_bfin: remove useless fault pathBryan Wu2008-02-061-13/+2
| | | | | | | | | | | Remove useless return status check in restore_state function. Issue was pointed out by Michael. Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: omap2_mcspi handles omap3 tooGirish2008-02-062-4/+39
| | | | | | | | | This adds driver OMAP SPI specific changes to support OMAP 3430 Signed-off-by: Girish S G <girishsg@ti.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: SuperH SPI using SCIMagnus Damm2008-02-063-0/+213
| | | | | | | | | | | | | Add support for SPI over SCI pins. SCI is a very simple serial controller block that can be found on older SuperH processors. In theory it is possible to use the SCI hardware block in syncronous mode, but this version of the driver simply hooks up the bit banging code on the SCI pins. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: s3c drivers shouldn't care about spi_board_infoDavid Brownell2008-02-062-24/+0
| | | | | | | | | | | | | | | | The two S3C SPI master drivers got merged without much review, so I just noticed that they're doing something that the SPI core code is responsible for, rather than any adapter driver: they try to register SPI devices. This removes that support from those drivers so they act normally. Interestingly, none of the current boards are affected. So it's a net code shrink with no loss of functionality. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_spi: fix dmachain oops with DEBUG enabledHaavard Skinnemoen2008-02-061-8/+12
| | | | | | | | | | | | | | | | In atmel_spi_next_xfer, xfer can be NULL because the next transfer may already have been submitted to the PDC (using DMA chaining). This can cause an oops, since the debug message assumed it was never null. The fix changes how those debug messages are issued, ensuring that one is issued each time a transfer is started instead of once per call. Also, properly indent the "can this transfer be chained" test so it's not hidden as if it were non-conditional code. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_spi: chain DMA transfersSilvester Erdeg2008-02-061-45/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for chained transfers in the atmel_spi driver, letting the DMA controller switch to the next buffer pair without CPU intervention. This reduced I/O latencies by about 2% in one bulk I/O test. It should also help work around several interrelated errata affecting chipselect 0 on at91rm9200 chips. Almost all of the changes are in the reworked atmel_spi_next_xfer() function. That's now called with the driver in one of three states: 1. It isn't transferring anything (in which case the first transfer of the current message is going to be sent) 2. It has finished transfering a non-chainable transfer (in which case it will go to the next transfer in the message) 3. It has finished transfering a chained transfer (in which case the next transfer is already queued) After that it will queue the next transfer if it can be chained. Signed-off-by: Szilveszter Ordog <slipszi@gmail.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_spi throughput improvementHaavard Skinnemoen2008-02-061-3/+8
| | | | | | | | | | | | | | | | | Don't insert (undesirable) delays between consecutive words (DLYBCT) or when activating chipselects (DLYBS). Removing the between-word delays improves the performance of bulk transfers (such as mtd_dataflash, m25p80, mmc_spi) significantly. In one test, the improvement was a factor of more than eight! (The large DLYBCT value came from the legacy at91 SPI driver, and it's not clear why it used such a huge value.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi core: stop updating dev->power.power_stateDavid Brownell2008-02-061-20/+14
| | | | | | | | | | Don't update dev->power.power_state any more in the SPI core. The only reason to update this scheduled-to-be-removed field was to make the already-removed /sys/devices/.../power/state files work better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove pointless casts from void pointersJeff Garzik2008-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove inclusions of <linux/autoconf.h>Ralf Baechle2008-02-061-1/+0
| | | | | | | | | | Nothing should ever include this file. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: "Mike Frysinger" <vapier.adi@gmail.com> Acked-by: "Bryan Wu" <cooloney.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Spelling fixes: lenght->lengthPaulius Zaleckas2008-02-031-1/+1
| | | | | Signed-off-by: Paulius Zaleckas <pauliusz@yahoo.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* Merge branch 'linux-2.6'Paul Mackerras2008-01-314-100/+72
|\
| * [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()eric miao2008-01-262-86/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common information of the designated SSP port. 2. remove those IRQ/memory request code, ssp_request() has done that for the driver 3. the SPI platform device is thus made psuedo, no resource (memory/IRQ) has to be defined, all will be retreived by ssp_request() 4. introduce ssp_get_clk_div() to handle controller difference in clock divisor setting 5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to handle the different SSP clock frequency between different processors Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.heric miao2008-01-261-0/+1
| | | | | | | | | | Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * spi: use class iteration apiDave Young2008-01-241-11/+15
| | | | | | | | | | | | | | | | | | Convert to use the class iteration api. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * spi: omap2_mcspi PIO RX fixKalle Valo2008-01-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before transmission of the last word in PIO RX_ONLY mode rx+tx mode is enabled: /* prevent last RX_ONLY read from triggering * more word i/o: switch to rx+tx */ if (c == 0 && tx == NULL) mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); But because c is decremented after the test, c will never be zero and rx+tx will not be enabled. This breaks RX_ONLY mode PIO transfers. Fix it by decrementing c in the beginning of the various I/O loops. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xxPaul Mackerras2008-01-311-77/+5
|\ \
| * | [POWERPC] mpc52xx_psc_spi device driver must not touch port_config and cdmGrant Likely2008-01-261-75/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is dangerous for an mpc52xx device driver to modify the port_config register. If the driver is probed incorrectly, it will change the pin IO configuration in ways which may not be compatible with the board. port_config should be set up by the bootloader, or failing that, in the platform setup code in arch/powerpc/platforms/52xx. Also, modifying CDM registers directly can cause a race condition with other drivers. Instead call a common routine to modify CDM settings. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Dragos Carp <dragos.carp@toptica.com>
| * | [POWERPC] mpc5200: normalize compatible property bindingsGrant Likely2008-01-261-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update MPC5200 drivers to also look for compatible properties in the form "fsl,mpc5200-*" to better conform to open firmware generic names recommended practice as published here: http://www.openfirmware.org/1275/practice/gnames/gnamv14a.html This patch should *not* break compatibility with older device trees which do not use the 'fsl,' prefix. The drivers will still bind against the older names also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 09:07:19 +0000