summaryrefslogtreecommitdiffstats
path: root/drivers/spi
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | spi: dw: Discard redundant DW SSI Frame Formats enumerationSerge Semin2021-11-162-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dw_ssi_type enumeration describes the SPI frame formats the controller supports, like Motorola SPI, Texas Instruments SSP and National Semiconductors Microwire, that is the serial protocol utilized for the SPI-transfers. Depending on the DW SSI IP-core configuration the protocol could be either fixed or selectable. If it is changebale the protocol can be selected by means of the CTRL0.FRF field, which possible values encoded by the dw_ssi_type enumeration. Aside with the denoted enum the field values are also described by a set of SPI_FRF_{SPI,SSP,MICROWIRE} macros. Thus currently the DW SPI driver has got two entities describing the same data. Let's get rid of the enumeration one then, since first it hasn't been used as enumeration-type but merely as a parametrized values set and second that would unify the macro-based CSR read/write interface of the driver. While at it convert the macro names to be more descriptive about the protocols they represent. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | spi: dw: Add a symbols namespace for the core moduleSerge Semin2021-11-165-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The exported from the DW SPI driver core/DMA symbols are only used by the spi-dw-{mmio,pci,bt1}.o objects. Add these symbols to a separate namespace then and make sure the depended modules have it imported. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | spi: xlp: Remove Netlogic XLP variantsRob Herring2021-11-152-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netlogic XLP was removed in commit 95b8a5e0111a ("MIPS: Remove NETLOGIC support"). With those gone, the single platform left to support is Cavium ThunderX2. Remove the Netlogic variant and DT support. For simplicity, the existing kconfig name is retained. Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211109161325.2203564-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | spi: lpspi: release requested DMA channelsAlexander Stein2021-11-151-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The requested DMA channels are never released. Do this in .remove as well as in .probe. spi_register_controller() can return -EPROBE_DEFER if cs-gpios are not probed yet. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20211109103134.184216-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | Merge existing fixes from spi/for-5.16 into new branchMark Brown2021-11-154-16/+38
| |\ \ \ | | |_|/ | |/| |
* | | | Merge tag 'drivers-5.17' of ↵Linus Torvalds2022-01-102-2/+11
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are cleanups and minor bugfixes across several SoC specific drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone, Renesas, ZynqMP Noteworthy new features are: - The op-tee firmware driver gains support for asynchronous notifications from secure-world firmware. - Qualcomm platforms gain support for new SoC types in various drivers: power domain, cache controller, RPM sleep, soc-info - Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as well as a new USIv2 driver that handles various types of serial communiction (uart, i2c, spi) - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers, as well as memory controller support for RZ/G2L (R9A07G044). - Apple M1 gains support for the PMGR power management driver" * tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ...
| * \ \ \ Merge tag 'tegra-for-5.17-drivers' of ↵Arnd Bergmann2021-12-201-1/+8
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers drivers: Changes for v5.17-rc1 This is an assortment of driver patches that rely on some of the changes in the for-5.17/soc branch. These have all been acked by the respective maintainers and go through the Tegra tree to more easily handle the build dependency. * tag 'tegra-for-5.17-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: media: staging: tegra-vde: Support generic power domain spi: tegra20-slink: Add OPP support mtd: rawnand: tegra: Add runtime PM and OPP support mmc: sdhci-tegra: Add runtime PM and OPP support pwm: tegra: Add runtime PM and OPP support bus: tegra-gmi: Add runtime PM and OPP support usb: chipidea: tegra: Add runtime PM and OPP support soc/tegra: Add devm_tegra_core_dev_init_opp_table_common() soc/tegra: Enable runtime PM during OPP state-syncing Link: https://lore.kernel.org/r/20211217162253.1801077-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | spi: tegra20-slink: Add OPP supportDmitry Osipenko2021-12-161-1/+8
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPI on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now SPI driver must use OPP API for driving the controller's clock rate because OPP API takes care of reconfiguring the domain's performance state in accordance to the rate. Add OPP support to the driver. Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | | | Merge tag 'memory-controller-drv-renesas-5.17' of ↵Arnd Bergmann2021-12-141-1/+3
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.17 - Renesas Changes to the Renesas RPC-IF driver: 1. Add support for R9A07G044 / RZ/G2L. 2. Several minor fixes and improvements to the driver. * tag 'memory-controller-drv-renesas-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: renesas-rpc-if: refactor MOIIO and IOFV macros memory: renesas-rpc-if: avoid use of undocumented bits memory: renesas-rpc-if: simplify register update memory: renesas-rpc-if: Silence clang warning memory: renesas-rpc-if: Add support for RZ/G2L memory: renesas-rpc-if: Drop usage of RPCIF_DIRMAP_SIZE macro memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails dt-bindings: memory: renesas,rpc-if: Add optional interrupts property dt-bindings: memory: renesas,rpc-if: Add support for the R9A07G044 Link: https://lore.kernel.org/r/20211213105618.5686-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | memory: renesas-rpc-if: Add support for RZ/G2LLad Prabhakar2021-11-161-1/+3
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPI Multi I/O Bus Controller on RZ/G2L SoC is almost identical to the RPC-IF interface found on R-Car Gen3 SoC's. This patch adds a new compatible string for the RZ/G2L family so that the timing values on RZ/G2L can be adjusted. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211025205631.21151-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
* | | | | Merge tag 'spi-fix-v5.16-rc6' of ↵Linus Torvalds2021-12-201-1/+1
|\ \ \ \ \ | |/ / / / |/| | | / | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One small fix for a long standing issue with error handling on probe in the Armada driver" * tag 'spi-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: change clk_disable_unprepare to clk_unprepare
| * | | spi: change clk_disable_unprepare to clk_unprepareDongliang Mu2021-12-061-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The corresponding API for clk_prepare is clk_unprepare, other than clk_disable_unprepare. Fix this by changing clk_disable_unprepare to clk_unprepare. Fixes: 5762ab71eb24 ("spi: Add support for Armada 3700 SPI Controller") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20211206101931.2816597-1-mudongliangabcd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge tag 'spi-fix-v5.16-rc1' of ↵Linus Torvalds2021-11-184-16/+38
|\| | | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes for v5.16, one in the core for an issue with handling of controller unregistration that was introduced with the fixes for registering nested SPI controllers and a few more minor device specific ones" * tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix use-after-free of the add_lock mutex spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan() spi: lpspi: Silence error message upon deferred probe spi: cadence-quadspi: fix write completion support
| * spi: fix use-after-free of the add_lock mutexMichael Walle2021-11-121-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock(). Fixes: 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v5.15 Link: https://lore.kernel.org/r/20211111083713.3335171-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()Dan Carpenter2021-11-121-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code has several issues: 1) It passes IS_ERR() to dev_err_probe() instead of PTR_ERR(). 2) It always prints an error message, even when it succeeds. 3) The "if (ret < 0) {" conditions are never true. 4) If requesting "mas->tx" fails then it sets "mas->rx" to NULL but the intention was to set "mas->tx" to NULL. Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211110073935.GA5176@kili Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: lpspi: Silence error message upon deferred probeAlexander Stein2021-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Do not print error messages with error code -517. Silences the following errors upon on imx8qm: fsl_lpspi 5a000000.spi: spi_register_controller error: -517 fsl_lpspi 5a010000.spi: spi_register_controller error: -517 fsl_lpspi 5a020000.spi: spi_register_controller error: -517 Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20211108145523.1797609-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: cadence-quadspi: fix write completion supportDinh Nguyen2021-11-121-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some versions of the Cadence QSPI controller does not have the write completion register implemented(CQSPI_REG_WR_COMPLETION_CTRL). On the Intel SoCFPGA platform the CQSPI_REG_WR_COMPLETION_CTRL register is not configured. Add a quirk to not write to the CQSPI_REG_WR_COMPLETION_CTRL register. Fixes: 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling) Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20211108200854.3616121-1-dinguyen@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge tag 'spi-v5.16' of ↵Linus Torvalds2021-11-0121-329/+2005
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This is quite a quiet release for SPI, there's been a bit of cleanup to the core from Uwe but nothing functionality wise. We have added several new drivers, Cadence XSPI, Ingenic JZ47xx, Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI" * tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits) spi: Convert NXP flexspi to json schema spi: spi-geni-qcom: Add support for GPI dma spi: fsi: Fix contention in the FSI2SPI engine spi: spi-rpc-if: Check return value of rpcif_sw_init() spi: tegra210-quad: Put device into suspend on driver removal spi: tegra20-slink: Put device into suspend on driver removal spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe() spi: at91-usart: replacing legacy gpio interface for gpiod spi: replace snprintf in show functions with sysfs_emit spi: cadence: Add of_node_put() before return spi: orion: Add of_node_put() before goto spi: cadence-quadspi: fix dma_unmap_single() call spi: tegra20: fix build with CONFIG_PM_SLEEP=n spi: bcm-qspi: add support for 3-wire mode for half duplex transfer spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode spi: Make several public functions private to spi.c spi: Reorder functions to simplify the next commit spi: Remove unused function spi_busnum_to_master() spi: Move comment about chipselect check to the right place spi: fsi: Print status on error ...
| * spi: spi-geni-qcom: Add support for GPI dmaVinod Koul2021-10-291-15/+239
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can use GPI DMA for devices where it is enabled by firmware. Add support for this mode Signed-off-by: Vinod Koul <vkoul@kernel.org> -- -Changes since v4: - Fix the kbuild bot warning -Changes since v3: - Drop merged spi core, geni patches - Remove global structs and use local variables instead - modularize code more as suggested by Doug - fix kbuild bot warning drivers/spi/spi-geni-qcom.c | 254 +++++++++++++++++++++++++++++++++--- 1 file changed, 239 insertions(+), 15 deletions(-) Link: https://lore.kernel.org/r/20211020060954.1531783-1-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: fsi: Fix contention in the FSI2SPI engineEddie James2021-10-271-22/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There was nothing to protect multiple SPI controllers on the same FSI2SPI device from being accessed through the FSI2SPI device at the same time. For example, multiple writes to the command and data registers might occur for different SPI controllers, resulting in complete chaos in the SPI engine. To prevent this, add a FSI2SPI device level mutex and lock it in the SPI register read and write functions. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211026193327.52420-1-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: spi-rpc-if: Check return value of rpcif_sw_init()Lad Prabhakar2021-10-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | rpcif_sw_init() can fail so make sure we check the return value of it and on error exit rpcif_spi_probe() callback with error code. Fixes: eb8d6d464a27 ("spi: add Renesas RPC-IF driver") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211025205631.21151-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: tegra210-quad: Put device into suspend on driver removalDmitry Osipenko2021-10-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | pm_runtime_disable() cancels all pending power requests, while they should be completed for the Tegra SPI driver. Otherwise SPI clock won't be disabled ever again because clk refcount will become unbalanced. Enforce runtime PM suspension to put device into expected state before driver is unbound and device's RPM state is reset by driver's core. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211023225951.14253-2-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: tegra20-slink: Put device into suspend on driver removalDmitry Osipenko2021-10-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | pm_runtime_disable() cancels all pending power requests, while they should be completed for the Tegra SPI driver. Otherwise SPI clock won't be disabled ever again because clk refcount will become unbalanced. Enforce runtime PM suspension to put device into expected state before driver is unbound and device's RPM state is reset by driver's core. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211023225951.14253-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()Yang Yingliang2021-10-261-2/+3
| | | | | | | | | | | | | | | | | | | | Fix the missing clk_disable_unprepare() before return from bcm_qspi_probe() in the error handling case. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211018073413.2029081-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: at91-usart: replacing legacy gpio interface for gpiodMaíra Canal2021-10-201-22/+5
| | | | | | | | | | | | | | | | | | Removing dependency of linux/of_gpio.h and replacing it for linux/gpio/consumer.h Signed-off-by: Maíra Canal <maira.canal@usp.br> Link: https://lore.kernel.org/r/YW8I5Emdc3t0cqhz@fedora Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: replace snprintf in show functions with sysfs_emitQing Wang2021-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | show() must not use snprintf() when formatting the value to be returned to user space. Fix the following coccicheck warning: drivers/spi/spi-tle62x0.c:144: WARNING: use scnprintf or sprintf. Use sysfs_emit instead of scnprintf or sprintf makes more sense. Signed-off-by: Qing Wang <wangqing@vivo.com> Link: https://lore.kernel.org/r/1634280668-4954-1-git-send-email-wangqing@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: cadence: Add of_node_put() before returnWan Jiabing2021-10-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix following coccicheck warning: ./drivers/spi/spi-cadence-xspi.c:490:1-23: WARNING: Function for_each_child_of_node should have of_node_put() before return Early exits from for_each_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211015033919.5915-1-wanjiabing@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: orion: Add of_node_put() before gotoWan Jiabing2021-10-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix following coccicheck warning: ./drivers/spi/spi-orion.c:738:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211015034008.6357-1-wanjiabing@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * Merge branch 'spi-5.15' into spi-5.16Mark Brown2021-10-142-16/+18
| |\
| * | spi: cadence-quadspi: fix dma_unmap_single() callArnd Bergmann2021-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are separate constants for the dma-mapping API and the dmaengine API, mixing them up causes a warning in some builds: In file included from drivers/spi/spi-cadence-quadspi.c:12: drivers/spi/spi-cadence-quadspi.c: In function 'cqspi_versal_indirect_read_dma': drivers/spi/spi-cadence-quadspi.c:950:55: error: implicit conversion from 'enum dma_transfer_direction' to 'enum dma_data_direction' [-Werror=enum-conversion] 950 | dma_unmap_single(dev, dma_addr, bytes_to_dma, DMA_DEV_TO_MEM); | ^~~~~~~~~~~~~~ include/linux/dma-mapping.h:407:70: note: in definition of macro 'dma_unmap_single' 407 | #define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, 0) | ^ Fixes: 1a6f854f7daa ("spi: cadence-quadspi: Add Xilinx Versal external DMA support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013144600.2378037-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: tegra20: fix build with CONFIG_PM_SLEEP=nArnd Bergmann2021-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is another one of these warnings: drivers/spi/spi-tegra20-slink.c:1197:12: error: 'tegra_slink_runtime_resume' defined but not used [-Werror=unused-function] 1197 | static int tegra_slink_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Give it the same treatment as the other functions in this file. Fixes: efafec27c565 ("spi: Fix tegra20 build with CONFIG_PM=n") Fixes: 2bab94090b01 ("spi: tegra20-slink: Declare runtime suspend and resume functions conditionally") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211013144538.2346533-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * | Merge series "spi-bcm-qspi spcr3 enahancements" from Kamal Dasu ↵Mark Brown2021-10-111-54/+208
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <kdasu.kdev@gmail.com>: This change set feature enahancements for spcr3 transfer modes as well as adds support for half-duplex 3-wire mode transfer. Kamal Dasu (3): spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode spi: bcm-qspi: clear MSPI spifie interrupt during probe spi: bcm-qspi: add support for 3-wire mode for half duplex transfer drivers/spi/spi-bcm-qspi.c | 262 +++++++++++++++++++++++++++++-------- 1 file changed, 208 insertions(+), 54 deletions(-) -- 2.17.1
| | * | spi: bcm-qspi: add support for 3-wire mode for half duplex transferKamal Dasu2021-10-111-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change configures the MSPI controller to use 3-wire interface when a slave device devictree nodes indicates this via the optional property. Signed-off-by: Kamal Dasu <kdasu@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211008203603.40915-4-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer modeKamal Dasu2021-10-111-21/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding 32-bits and 64-bits per transfer modes using the SPCR3 register settings provided in MSPI controller ver >= 1.5 Signed-off-by: Kamal Dasu <kdasu@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211008203603.40915-2-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | Merge series "spi: Various Cleanups" from Uwe Kleine-König ↵Mark Brown2021-10-071-142/+95
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <u.kleine-koenig@pengutronix.de>: Hello, while trying to understand how the spi framework makes use of the core device driver stuff (to fix a deadlock) I found these simplifications and improvements. They are build-tested with allmodconfig on arm64, m68k, powerpc, riscv, s390, sparc64 and x86_64. Best regards Uwe Uwe Kleine-König (4): spi: Move comment about chipselect check to the right place spi: Remove unused function spi_busnum_to_master() spi: Reorder functions to simplify the next commit spi: Make several public functions private to spi.c Documentation/spi/spi-summary.rst | 8 - drivers/spi/spi.c | 237 ++++++++++++------------------ include/linux/spi/spi.h | 55 ------- 3 files changed, 95 insertions(+), 205 deletions(-) base-commit: 9e1ff307c779ce1f0f810c7ecce3d95bbae40896 -- 2.30.2
| | * | | spi: Make several public functions private to spi.cUwe Kleine-König2021-10-071-27/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All these functions have no callers apart from drivers/spi/spi.c. So drop their declarations in include/linux/spi/spi.h and don't export them. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211007121415.2401638-5-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: Reorder functions to simplify the next commitUwe Kleine-König2021-10-071-86/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the "Core methods for SPI resource management" are exported and public functions. They are however only used in drivers/spi/spi.c. To allow to drop the global declarations and not to have to insert local ones instead, move them before their users. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211007121415.2401638-4-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: Remove unused function spi_busnum_to_master()Uwe Kleine-König2021-10-071-35/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The last user is gone since commit 2962db71c703 ("staging/fbtft: Remove fbtft_device") in 2019. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211007121415.2401638-3-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: Move comment about chipselect check to the right placeUwe Kleine-König2021-10-071-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The part of the comment about locking isn't that relevant compared to the chip select check. So drop the sentence about locking. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211007121415.2401638-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | Merge branch 'spi-5.15' into spi-5.16Mark Brown2021-10-076-58/+60
| |\ \ \ \
| * | | | | spi: fsi: Print status on errorEddie James2021-10-051-21/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Print the SPI engine status register when an error is detected. This will aid tremendously in debugging failed transactions. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211004195149.29759-1-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | spi: cadence: fix static checker warningParshuram Thombare2021-10-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes Smatch static checker warning. CDNS_XSPI_CMD_REG_5 is used in ACMD mode and currently only STIG mode is enabled which doesn't use CDNS_XSPI_CMD_REG_5 and hence everything was working in STIG mode. Since plan is to use same function cdns_xspi_trigger_command() in ACMD mode, increasing size of the array passed to it. Fixes: a16cc8077627 ("spi: cadence: add support for Cadence XSPI controller") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/linux-spi/20210930134231.GA14363@kili/ Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Link: https://lore.kernel.org/r/1633336704-22735-1-git-send-email-pthombar@cadence.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | spi: cadence-quadspi: Add Xilinx Versal external DMA supportSai Krishna Potthuri2021-10-011-9/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to read the data from the flash using external DMA. Cadence Octal SPI Flash Controller has optional DMA peripheral interface to communicate indirect mode of operations with external DMA. Xilinx Versal OSPI has external DMA enabled, this will automatically request the external DMA to fetch the data from SRAM. It supports only reading the data from SRAM (DMA read) and doesn't support writing the data to SRAM (DMA write). Xilinx Versal OSPI read the data from the flash device using external DMA and write the data to the flash device using software triggered indirect mode. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1632478031-12242-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | spi: cadence-quadspi: Add OSPI support for Xilinx Versal SoCSai Krishna Potthuri2021-10-011-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add OSPI support for Xilinx Versal SoCs. Disable the Direct Access Controller for Xilinx Versal OSPI. On Xilinx Versal platform, AXI interface need to be selected as Linear mode (driven from interconnect rather than external DMA) to use Software triggered 'indirect' mode of operation. This will be achieved by calling Xilinx firmware API. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1632478031-12242-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | spi: cadence: Fix spelling mistake "nunber" -> "number"Colin Ian King2021-09-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Parshuram Thombare <pthombar@cadence.com> Link: https://lore.kernel.org/r/20210928130712.990474-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | Merge series "add support for Cadence's XSPI controller" from Parshuram ↵Mark Brown2021-09-273-0/+653
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thombare <pthombar@cadence.com>: This patch series adds support for Cadence's XSPI controller. It supports 3 work modes. 1. ACMD (auto command) work mode ACMD name is because it uses auto command engine in the controller. It further has 2 modes PIO and CDMA (command DMA). The CDMA work mode is dedicated for high-performance application where very low software overhead is required. In this mode the Command Engine is programmed by the series of linked descriptors stored in system memory. These descriptors provide commands to execute and store status information for finished commands. The PIO mode work mode is dedicated for single operation where constructing a linked list of descriptors would require too much effort. 2. STIG (Software Triggered Instruction Generator) work mode In STIG mode, controller sends low-level instructions to memory. Each instruction is 128-bit width. There is special instruction DataSequence which carries information about data phase. Driver uses Slave DMA interface to transfer data as only this interface can be used in STIG work mode. 3. Direct work mode This work mode allows sending data without invoking any command through the slave interface. Currently only STIG work mode is enabled, remaining work modes will be added later. Changes since v5: 1. Added adjust_op_size to adjust op size according to sdma size. Changes since v4: 1. Changed reg region names and lengths as suggested by Rob. Changes since v3: 1. Removed ACMD PIO mode. 2. Return IRQ_HANDLED only for handled interrupts. 3. DT binding changes. Changes since v2: 1. Removed extra lock around exec_op. 2. Removed PHY parameters setting from the driver, those will be handled by bootstrap pins available in the controller. Changes since v1: 1. Use ACMD PIO work mode for NOR read, program and erase operations, for everything else use STIG(Software Triggered Instruction Generator) work mode. 2. Changes suggested by Lukas. Parshuram Thombare (2): spi: cadence: add dt-bindings documentation for Cadence XSPI controller spi: cadence: add support for Cadence XSPI controller .../devicetree/bindings/spi/cdns,xspi.yaml | 77 +++ drivers/spi/Kconfig | 12 + drivers/spi/Makefile | 1 + drivers/spi/spi-cadence-xspi.c | 640 +++++++++++++++++++++ 4 files changed, 730 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml create mode 100644 drivers/spi/spi-cadence-xspi.c -- 2.7.4
| | * | | | | spi: cadence: add support for Cadence XSPI controllerParshuram Thombare2021-09-273-0/+653
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds driver for Cadence's XSPI controller. It supports 3 work modes. 1. ACMD (auto command) work mode ACMD name is because it uses auto command engine in the controller. It further has 2 modes PIO and CDMA (command DMA). The CDMA work mode is dedicated for high-performance application where very low software overhead is required. In this mode the Command Engine is programmed by the series of linked descriptors stored in system memory. These descriptors provide commands to execute and store status information for finished commands. The PIO mode work mode is dedicated for single operation where constructing a linked list of descriptors would require too much effort. 2. STIG (Software Triggered Instruction Generator) work mode In STIG mode, controller sends low-level instructions to memory. Each instruction is 128-bit width. There is special instruction DataSequence which carries information about data phase. Driver uses Slave DMA interface to transfer data as only this interface can be used in STIG work mode. 3. Direct work mode This work mode allows sending data without invoking any command through the slave interface. Currently only STIG work mode is enabled, remaining work modes will be added later. Signed-off-by: Konrad Kociolek <konrad@cadence.com> Signed-off-by: Jayshri Pawar <jpawar@cadence.com> Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/1632038734-23999-1-git-send-email-pthombar@cadence.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | | spi: s3c64xx: describe driver in KConfigKrzysztof Kozlowski2021-09-271-2/+3
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924133114.111777-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | Merge branch 'spi-5.15' into spi-5.16Mark Brown2021-09-211-4/+2
| |\ \ \ \ \
| * | | | | | spi: Fixed division by zero warningYoshitaka Ikeda2021-09-204-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reason for dividing by zero is because the dummy bus width is zero, but if the dummy n bytes is zero, it indicates that there is no data transfer, so there is no need for calculation. Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/OSZPR01MB70049C8F56ED8902852DF97B8BD49@OSZPR01MB7004.jpnprd01.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-16 12:57:21 +0000