summaryrefslogtreecommitdiffstats
path: root/drivers/spi
Commit message (Collapse)AuthorAgeFilesLines
*-------. Merge remote-tracking branches 'spi/fix/lock', 'spi/fix/maintainers', ↵Mark Brown2016-09-066-6/+12
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | 'spi/fix/put', 'spi/fix/pxa2xx', 'spi/fix/sh-msiof' and 'spi/fix/timeout' into spi-linus
| | | | | * spi: Prevent unexpected SPI time out due to arithmetic overflowSien Wu2016-09-031-2/+6
| |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When reading SPI flash as MTD device, the transfer length is directly passed to the spi driver. If the requested data size exceeds 512KB, it will cause the time out calculation to overflow since transfer length is 32-bit unsigned integer. This issue is resolved by using 64-bit unsigned integer to perform the arithmetic. Signed-off-by: Sien Wu <sien.wu@ni.com> Acked-by: Brad Keryan <brad.keryan@ni.com> Acked-by: Gratian Crisan <gratian.crisan@ni.com> Acked-by: Brad Mouring <brad.mouring@ni.com> Natinst-ReviewBoard-ID 150232 Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * spi: sh-msiof: Avoid invalid clock generator parametersGeert Uytterhoeven2016-08-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conversion from a look-up table to a calculation for clock generator parameters forgot to take into account that BRDV x 1/1 is valid only if BRPS is x 1/1 or x 1/2, leading to undefined behavior (e.g. arbitrary clock rates). This limitation is documented for the MSIOF module in all supported SH/R-Mobile and R-Car Gen2/Gen3 ARM SoCs. Tested on r8a7791/koelsch and r8a7795/salvator-x. Fixes: 65d5665bb260b034 ("spi: sh-msiof: Update calculation of frequency dividing") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devicesAndy Shevchenko2016-08-241-0/+1
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Slave devices are not enumerated by ACPI data because the ACPI handle for the core driver is NULL if it was enumerated by PCI. Propagate firmware node handle of the PCI device to the platform device. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | spi: img-spfi: Remove spi_master_put in img_spfi_remove()Wei Yongjun2016-07-271-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to spi_master_put() in img_spfi_remove() is redundant since the master is registered using devm_spi_register_master() and no reference hold by using spi_master_get() in img_spfi_remove(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | spi: mediatek: remove spi_master_put in mtk_spi_remove()Wei Yongjun2016-07-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to spi_master_put() in mtk_spi_remove() is redundant since the master is registered using devm_spi_register_master() and no reference hold by using spi_master_get() in mtk_spi_remove(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | spi: qup: Remove spi_master_put in spi_qup_remove()Wei Yongjun2016-07-271-1/+0
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to spi_master_put() in spi_qup_remove() is redundant since the master is registered using devm_spi_register_master() and no reference hold by using spi_master_get() in spi_qup_remove(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * / spi: Drop io_mutex in error pathsMark Brown2016-08-091-0/+2
|/ / | | | | | | | | | | | | A couple of error paths were missing drops of io_mutex. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge tag 'armsoc-dt' of ↵Linus Torvalds2016-08-011-31/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ...
| * | spi: st-ssc4: Remove 'no clocking' hackLee Jones2016-07-121-31/+5
| | | | | | | | | | | | | | | | | | | | | | | | Due to the newly upstreamed 'critical clocks' API we can now safely handle clocking in the SPI and I2C drivers without fear of catastrophically crippling the running platform. Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | Merge tag 'spi-v4.8' of ↵Linus Torvalds2016-07-2732-883/+1303
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of cleanup and maintainence work going on this release in various drivers, and also a fix for a nasty locking issue in the core: - A fix for locking issues when external drivers explicitly locked the bus with spi_bus_lock() - we were using the same lock to both control access to the physical bus in multi-threaded I/O operations and exclude multiple callers. Confusion between these two caused us to have scenarios where we were dropping locks. These are fixed by splitting into two separate locks like should have been done originally, making everything much clearer and correct. - Support for DMA in spi_flash_read(). - Support for instantiating spidev on ACPI systems, including some test devices used in Windows validation. - Use of the core DMA mapping functionality in the McSPI driver. - Start of support for ThunderX SPI controllers, involving a very big set of changes to the Cavium driver. - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036, RK3228, RK3368 controllers" * tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: Split bus and I/O locking spi: octeon: Split driver into Octeon specific and common parts spi: octeon: Move include file from arch/mips to drivers/spi spi: octeon: Put register offsets into a struct spi: octeon: Store system clock freqency in struct octeon_spi spi: octeon: Convert driver to use readq()/writeq() functions spi: pic32-sqi: fixup wait_for_completion_timeout return handling spi: pic32: fixup wait_for_completion_timeout return handling spi: rockchip: limit transfers to (64K - 1) bytes spi: xilinx: Return IRQ_NONE if no interrupts were detected spi: xilinx: Handle errors from platform_get_irq() spi: s3c64xx: restore removed comments spi: s3c64xx: add Exynos5433 compatible for ioclk handling spi: s3c64xx: use error code from clk_prepare_enable() spi: s3c64xx: rename goto labels to meaningful names spi: s3c64xx: document the clocks and the clock-name property spi: s3c64xx: add exynos5433 spi compatible spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove() spi: spi-sh: Remove deprecated create_singlethread_workqueue spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue ...
| * | Merge remote-tracking branch 'spi/fix/locking' into spi-nextMark Brown2016-07-251-20/+18
| |\ \
| | * | spi: Split bus and I/O lockingMark Brown2016-07-251-20/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current SPI code attempts to use bus_lock_mutex for two purposes. One is to implement spi_bus_lock() which grants exclusive access to the bus. The other is to serialize access to the physical hardware. This duplicate purpose causes confusion which leads to cases where access is not locked when a caller holds the bus lock mutex. Fix this by splitting out the I/O functionality into a new io_mutex. This means taking both mutexes in the DMA path, replacing the existing mutex with the new I/O one in the message pump (the mutex now always being taken in the message pump) and taking the bus lock mutex in spi_sync(), allowing __spi_sync() to have no mutex handling. While we're at it hoist the mutex further up the message pump before we power up the device so that all power up/down of the block is covered by it and there are no races with in-line pumping of messages. Reported-by: Rich Felker <dalias@libc.org> Tested-by: Rich Felker <dalias@libc.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | Merge remote-tracking branch 'spi/topic/xilinx' into spi-nextMark Brown2016-07-241-2/+6
| |\ \ \
| | * | | spi: xilinx: Return IRQ_NONE if no interrupts were detectedLars-Peter Clausen2016-07-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return IRQ_NONE from the interrupt handler if the handler is running, but no interrupt was detected. This allows the system to recover in case of an interrupt storm due to an invalid interrupt configuration or faulty hardware. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: xilinx: Handle errors from platform_get_irq()Lars-Peter Clausen2016-07-151-1/+4
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Xilinx SPI driver can operate without an IRQ, but not every error returned by platform_get_irq() means that no IRQ was specified. It will also return an error if the IRQ specification is invalid or the IRQ provider is not yet available (EPROBE_DEFER). So instead of ignoring all errors only ignore ENXIO, which means no IRQ was specified, and propagate all other errors to device driver core. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | |
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| *-------. \ \ Merge remote-tracking branches 'spi/topic/spidev', 'spi/topic/sunxi', ↵Mark Brown2016-07-246-33/+62
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | 'spi/topic/ti-qspi', 'spi/topic/topcliff-pch' and 'spi/topic/txx9' into spi-next
| | | | | | * | | spi: spi-txx9: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar2016-07-031-9/+2
| | | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The workqueue "workqueue" has a single work item(&c->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in txx9spi_remove() to ensure that nothing is pending while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * / / spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar2016-07-111-23/+3
| | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The workqueue "wk" serves as a queue for carrying out execution of requests. It has a single work item(&drv_data->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in pch_spi_free_resources() to ensure that there are no pending tasks while disconnecting the driver. Also dropped the label 'err_return' since it's not being used anymore. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * / / spi: ti-qspi: spelling mistake: "trasnfers" -> "transfers"Colin Ian King2016-06-261-1/+1
| | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | trivial fix to spelling mistake in dev_dbg message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | spi: sunxi: set maximum and minimum speed of SPI masterMichal Suchanek2016-06-272-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The speed limits are unset in the sun4i and sun6i SPI drivers. The maximum speed of SPI master is used when maximum speed of SPI slave is not specified. Also the __spi_validate function should check that transfer speeds do not exceed the master limits. The user manual for A10 and A31 specifies maximum speed of the SPI clock as 100MHz and minimum as 3kHz. Setting the SPI clock to out-of-spec values can lock up the SoC. Signed-off-by: Michal Suchanek <hramrach@gmail.com> -- v2: new patch v3: fix constant style Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | spi: sunxi: expose maximum transfer size limitMichal Suchanek2016-06-142-0/+11
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sun4i spi hardware can trasfer at most 63 bytes of data without DMA support so report the limitation. Same for sun6i. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * / / spi: spidev: Add ACPI probing supportMika Westerberg2016-07-041-0/+41
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some IoT and maker software stacks are using spidev to perform raw access to the SPI bus instead of relying existing drivers provided by the kernel. They then implement their own "drivers" in userspace on top of the spidev raw interface. This is far from being an ideal solution but we do not want to prevent using mainline Linux in these devices. Now, it turns out that Windows has similar SPI devices than spidev which allow raw access on the SPI bus to userspace programs as described in the link below: https://msdn.microsoft.com/windows/hardware/drivers/spb/spi-tests-in-mitt These SPI test devices are also meant to be used during development and testing. In order to allow usage of spidev for development and testing in Linux, add those same ACPI IDs to the spidev driver (which is Linux counterpart of the Windows SPI test devices), but complain loudly so that users know it is not good idea to use it in production systems. Instead they should be using proper drivers for peripherals connected to the SPI bus. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | |
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| *-------. \ \ Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/rockchip', ↵Mark Brown2016-07-248-314/+282
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | 'spi/topic/s3c64xx', 'spi/topic/sh' and 'spi/topic/sh-msiof' into spi-next
| | | | | | * | | spi: sh-msiof: Remove sh_msiof_spi_priv.chipdataGeert Uytterhoeven2016-06-221-9/+9
| | | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After probe time, the pointer to the sh_msiof_chipdata structure in the sh_msiof_spi_priv structure is used only for checking the SPI master flags. As these are also available in the spi_master structure, convert the users to access those, and remove the pointer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * / / spi: spi-sh: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar2016-07-111-13/+3
| | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The workqueue has a single workitem(&ss->ws) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in spi_sh_remove() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: restore removed commentsAndi Shyti2016-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch a9e93e8 has erroneously removed some comments which are important to understand why the bus frequency is multiplied by two during the spi transfer. Reword the previous comment to a more appropriate message. Suggested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: add Exynos5433 compatible for ioclk handlingAndi Shyti2016-07-141-5/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new compatible is related to the Samsung Exynos5433 SoC. The difference between the previous is that in the exynos5433 the SPI controller is driven by three clocks instead of only one. The new clock (ioclk) is controlling the input/output clock whenever the controller is slave or master. The presence of the clock line is detected from the compatibility structure (exynos5433_spi_port_config) as a boolean value. The probe function checks whether the ioclk is present and if so, it acquires. The runtime suspend and resume functions will handle the clock enabling and disabling as well. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: use error code from clk_prepare_enable()Andi Shyti2016-07-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If clk_prepare_enable() fails do not return -EBUSY but use the value provided by the function itself. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: rename goto labels to meaningful namesAndi Shyti2016-07-141-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The goto labels of the style of err4: err3: err2: err1: are complex to insert in between new errors without renaming all the goto statements. Replace the errX naming style to meaningful names in order to make it easier to insert new goto exit points. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()Wei Yongjun2016-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: do not disable the clock while configuring the spiAndi Shyti2016-07-071-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the clock is coming from the cmu it is not required to be disabled and then re-enabled in order to change the rate. Besides, some exynos chipsets (e.g. exynos5433) do not deliver any to the SFR if one from the pclk ("spi" in this case) or sclk ("busclk") is disabled. Remove the clock disabling/enabling to avoid falling into this situation. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: indent an if statementDan Carpenter2016-07-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It generates a static checker warning if an if statement isn't indented. I think the code is fine except for the white space issue. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: simplify if statement in prepare_transfer functionAndi Shyti2016-06-291-28/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The whole function is inside an 'if' statement ("!is_polling(sdd)"). Check the opposite of that statement at the beginning and exit, this way we can have one level less of indentation. Remove the goto paths as they are redundant. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: do not configure the device twiceAndi Shyti2016-06-291-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the start of the transfer, the spi_config function is called twice, the first time when the 3c64xx_spi_prepare_message is called and the second time with the s3c64xx_spi_transfer_one, both called from the spi framework. Remove the first call at the prepare message because in that point we don't have the imformation about "bit per word" and frequency. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: consider the case when the CS line is not connectedAndi Shyti2016-06-291-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the CS line is not connected, it is not needed to enable or disable the chip selection functionality from the s3c64xx devices in order to perform a transfer. Set the CS controller logically always enabled already during initialization (by writing '0' in the S3C64XX_SPI_SLAVE_SEL register) and never disable it. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | spi: s3c64xx: group the CS signalling writes in a single functionAndi Shyti2016-06-291-10/+26
| | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To enable/disable the CS line, the driver performs a writel in the S3C64XX_SPI_SLAVE_SEL registers. Group the register's configuration in a single function. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * / / spi/rockchip: add the rk3036/rk3228/rk3368 to match for driverCaesar Wang2016-05-311-0/+3
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In gerenal, the "rockchip,rockchip-spi" string will match the dts that's great in spi driver. After all the most of rockchip SoCs ar same spi controller. Then, we should keep the old style to match the dts various. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx-pci: Support both chipselects on BraswellAndy Shevchenko2016-07-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 30f3a6ab44d8 ("spi: pxa2xx: Add support for both chip selects on Intel Braswell") introduces a support of chipselects for Intel Braswell SPI host controller. Though it missed to convert the PCI part of the driver. Do conversion here which enables both chipselects on Intel Braswell when enumerated via PCI. We don't care about num_chipselect value since it is overrided inside core driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx-pci: Sort header block alphabeticallyAndy Shevchenko2016-07-041-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simply sort header block alphabetically. While here, sort devices by PCI ID and add a copyright line for Intel. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx-pci: Remove unused codeAndy Shevchenko2016-07-041-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pcim_iomap_table() can't fail when called after pcim_iomap_regions(). Moreover, we already dereference returned value and kernel will crash if it is not correct. Remove obvious leftover of commit 0202775bc3a2 ("spi/pxa2xx-pci: switch to use pcim_* interfaces"). Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx-pci: Enable SPI on Intel MerrifieldAndy Shevchenko2016-07-041-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPI controllers used on Intel Merrifield are PXA2XX compatible. This patch enables them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx-pci: Do a specific setup in a separate functionAndy Shevchenko2016-07-041-33/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move LPSS specific setup to a separate function. It makes ->probe() cleaner as well as allows extend the driver for different variation of hardware in the future, e.g. for Intel Merrifield. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx: Add support for Intel Kaby Lake PCH-HMika Westerberg2016-07-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kaby Lake PCH-H has the same SPI host controller as Skylake. Add these new PCI IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx: Switch to SPI core DMA mapping functionalityJarkko Nikula2016-06-213-157/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPI core provides DMA mapping with scatterlists. Start using it instead of own implementation in spi-pxa2xx. Major difference in addition to bunch of removed boilerplate code is that SPI core does mapping/unmapping for all transfers in a message before and after the message sending where spi-pxa2xx did mapping/unmapping for each transfers separately. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx: Use local struct spi_master pointer in pump_transfers()Jarkko Nikula2016-06-211-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We will find more use for struct spi_master pointer in pump_transfers() and code will be more readable if we access it using local pointer than through the drv_data->master. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | spi: pxa2xx: use DMA by default if supportedDan O'Donovan2016-05-301-9/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, even if the PXA2xx SPI master supports DMA, it won't be enabled unless (i) the slave device is enumerated through ACPI, or (ii) the slave device is registered with board-specific controller_data specified. Even then, there isn't a field in the controller_data that explicitly enables dma - it just gets enabled if the master supports it and controller_data is non-NULL. This means that drivers which register SPI devices on a bus without awareness of this controller cannot avail of DMA performance gains. This patch allows DMA transfers to be used if supported. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | |
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| *-------. \ \ Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/omap2-mcspi', ↵Mark Brown2016-07-2410-336/+750
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | 'spi/topic/orion', 'spi/topic/pic32' and 'spi/topic/pic32-sqi' into spi-next
| | | | | | * | | spi: pic32-sqi: fixup wait_for_completion_timeout return handlingNicholas Mc Guire2016-07-241-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_for_completion_timeout returns unsigned long not int so the check for <= 0 should be == 0 here, and the type unsigned long. The function return is set to -ETIMEDOUT to reflect the actual problem. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | spi: pic32: fixup wait_for_completion_timeout return handlingNicholas Mc Guire2016-07-241-2/+3
| | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_for_completion_timeout returns unsigned long not int so the check for <= 0 should be == 0 here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 06:47:31 +0000