summaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt/switch.c
Commit message (Collapse)AuthorAgeFilesLines
* thunderbolt: Support 1st gen Light Ridge controllerLukas Wunner2016-04-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the 1st gen Light Ridge controller, which is built into these systems: iMac12,1 2011 21.5" iMac12,2 2011 27" Macmini5,1 2011 i5 2.3 GHz Macmini5,2 2011 i5 2.5 GHz Macmini5,3 2011 i7 2.0 GHz MacBookPro8,1 2011 13" MacBookPro8,2 2011 15" MacBookPro8,3 2011 17" MacBookPro9,1 2012 15" MacBookPro9,2 2012 13" Light Ridge (CV82524) was the very first copper Thunderbolt controller, introduced 2010 alongside its fiber-optic cousin Light Peak (CVL2510). Consequently the chip suffers from some teething troubles: - MSI is broken for hotplug signaling on the downstream bridges: The chip just never sends an interrupt. It requests 32 MSIs for each of its six bridges and the pcieport driver only allocates one per bridge. However I've verified that even if 32 MSIs are allocated there's no interrupt on hotplug. The only option is thus to disable MSI, which is also what OS X does. Apparently all Thunderbolt chips up to revision 1 of Cactus Ridge 4C are plagued by this issue so quirk those as well. - The chip supports a maximum hop_count of 32, unlike its successors which support only 12. Fixup ring_interrupt_active() to cope with values >= 32. - Another peculiarity is that the chip supports a maximum of 13 ports whereas its successors support 12. However the additional port (#5) seems to be unusable as reading its TB_CFG_PORT config space results in TB_CFG_ERROR_INVALID_CONFIG_SPACE. Add a quirk to mark the port disabled on the root switch, assuming that's necessary on all Macs using this chip. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: William Brown <william@blackhats.net.au> [MacBookPro8,2] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Noever <andreas.noever@gmail.com>
* thunderbolt: Fix typos and magic numberLukas Wunner2016-04-081-5/+5
| | | | | | | | | | Fix typo in tb_cfg_print_error() message. Fix bytecount in struct tb_drom_entry_port comment. Replace magic number in tb_switch_alloc(). Rename tb_sw_set_unpplugged() and TB_CAL_IECS to fix typos. [bhelgaas: no functional change intended] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Noever <andreas.noever@gmail.com>
* PCI: Add Intel Thunderbolt device IDsLukas Wunner2016-04-081-4/+5
| | | | | | | | | | Intel Gen 1 and 2 chips use the same ID for NHI, bridges and switch. Gen 3 chips and onward use a distinct ID for the NHI. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Noever <andreas.noever@gmail.com>
* thunderbolt: Use NULL instead of 0 in switch.cSachin Kamat2014-06-201-3/+3
| | | | | | | | The function returns a pointer. Hence return NULL instead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Fix build error in switch.cSachin Kamat2014-06-201-0/+1
| | | | | | | | | | Fixes the below error: drivers/thunderbolt/switch.c:347:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration] drivers/thunderbolt/switch.c:381:2: error: implicit declaration of function ‘kcalloc’ [-Werror=implicit-function-declaration] Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Fix nontrivial endpoint devices.Andreas Noever2014-06-191-17/+25
| | | | | | | | | | | | | | | | | | | | Fix issues observed with the Startech docking station: Fix the type of the route parameter in tb_ctl_rx. It should be u64 and not u8 (which only worked for short routes). A thunderbolt cable contains two lanes. If both endpoints support it a connection will be established on both lanes. Previously we tried to scan below both "dual link ports". Use the information extracted from the drom to only scan behind ports with lane_nr == 0. Endpoints with more complex thunderbolt controllers have some of their ports disabled (for example the NHI port or one of the HDMI/DP ports). Accessing them results in an error so we now ignore ports which are marked as disabled in the drom. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Read port configuration from eeprom.Andreas Noever2014-06-191-2/+2
| | | | | | | | | | | | All Thunderbolt switches (except the root switch) contain a drom which contains information about the device. Right now we only read the UID. Add code to read and parse this drom. For now we are only interested in which ports are disabled and which ports are "dual link ports" (a physical thunderbolt port/socket contains two such ports). Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Add suspend/hibernate supportAndreas Noever2014-06-191-0/+84
| | | | | | | | We use _noirq since we have to restore the pci tunnels before the pci core wakes the tunneled devices. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Read switch uid from EEPROMAndreas Noever2014-06-191-0/+5
| | | | | | | | Add eeprom access code and read the uid during switch initialization. The UID will be used to check device identity after suspend. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Add path setup code.Andreas Noever2014-06-191-0/+34
| | | | | | | | | | | A thunderbolt path is a unidirectional channel between two thunderbolt ports. Two such paths are needed to establish a pci tunnel. This patch introduces struct tb_path as well as a set of tb_path_* methods which are used to activate & deactivate paths. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Handle hotplug eventsAndreas Noever2014-06-191-1/+41
| | | | | | | | | We receive a plug event callback whenever a thunderbolt device is added or removed. This patch fills in the tb_handle_hotplug method and starts reacting to these events by adding/removing switches from the hierarchy. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Scan for downstream switchesAndreas Noever2014-06-191-0/+97
| | | | | | | | Add utility methods tb_port_state and tb_wait_for_port. Add tb_scan_switch which recursively checks for downstream switches. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Enable plug eventsAndreas Noever2014-06-191-0/+52
| | | | | | | | | Thunderbolt switches have a plug events capability. This patch adds the tb_plug_events_active method and uses it to activate plug events during switch allocation. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Initialize root switch and portsAndreas Noever2014-06-191-0/+186
This patch adds the structures tb_switch and tb_port as well as code to initialize the root switch. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-13 09:52:10 +0000