summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/8250/8250_dw.c
Commit message (Collapse)AuthorAgeFilesLines
* dmaengine: idma64: Use actual device for DMA transfersAndy Shevchenko2019-03-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | Intel IOMMU, when enabled, tries to find the domain of the device, assuming it's a PCI one, during DMA operations, such as mapping or unmapping. Since we are splitting the actual PCI device to couple of children via MFD framework (see drivers/mfd/intel-lpss.c for details), the DMA device appears to be a platform one, and thus not an actual one that performs DMA. In a such situation IOMMU can't find or allocate a proper domain for its operations. As a result, all DMA operations are failed. In order to fix this, supply parent of the platform device to the DMA engine framework and fix filter functions accordingly. We may rely on the fact that parent is a real PCI device, because no other configuration is present in the wild. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts] Signed-off-by: Vinod Koul <vkoul@kernel.org>
* Revert "serial: 8250_dw: Fix runtime PM handling"Guenter Roeck2018-10-021-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit d76c74387e1c978b6c5524a146ab0f3f72206f98. While commit d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") fixes runtime PM handling when using kgdb, it introduces a traceback for everyone else. BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/next/drivers/base/power/runtime.c:1034 in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0 7 locks held by swapper/0/1: #0: 000000005ec5bc72 (&dev->mutex){....}, at: __driver_attach+0xb5/0x12b #1: 000000005d5fa9e5 (&dev->mutex){....}, at: __device_attach+0x3e/0x15b #2: 0000000047e93286 (serial_mutex){+.+.}, at: serial8250_register_8250_port+0x51/0x8bb #3: 000000003b328f07 (port_mutex){+.+.}, at: uart_add_one_port+0xab/0x8b0 #4: 00000000fa313d4d (&port->mutex){+.+.}, at: uart_add_one_port+0xcc/0x8b0 #5: 00000000090983ca (console_lock){+.+.}, at: vprintk_emit+0xdb/0x217 #6: 00000000c743e583 (console_owner){-...}, at: console_unlock+0x211/0x60f irq event stamp: 735222 __down_trylock_console_sem+0x4a/0x84 console_unlock+0x338/0x60f __do_softirq+0x4a4/0x50d irq_exit+0x64/0xe2 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5 #6 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.286.0 03/15/2017 Call Trace: dump_stack+0x7d/0xbd ___might_sleep+0x238/0x259 __pm_runtime_resume+0x4e/0xa4 ? serial8250_rpm_get+0x2e/0x44 serial8250_console_write+0x44/0x301 ? lock_acquire+0x1b8/0x1fa console_unlock+0x577/0x60f vprintk_emit+0x1f0/0x217 printk+0x52/0x6e register_console+0x43b/0x524 uart_add_one_port+0x672/0x8b0 ? set_io_from_upio+0x150/0x162 serial8250_register_8250_port+0x825/0x8bb dw8250_probe+0x80c/0x8b0 ? dw8250_serial_inq+0x8e/0x8e ? dw8250_check_lcr+0x108/0x108 ? dw8250_runtime_resume+0x5b/0x5b ? dw8250_serial_outq+0xa1/0xa1 ? dw8250_remove+0x115/0x115 platform_drv_probe+0x76/0xc5 really_probe+0x1f1/0x3ee ? driver_allows_async_probing+0x5d/0x5d driver_probe_device+0xd6/0x112 ? driver_allows_async_probing+0x5d/0x5d bus_for_each_drv+0xbe/0xe5 __device_attach+0xdd/0x15b bus_probe_device+0x5a/0x10b device_add+0x501/0x894 ? _raw_write_unlock+0x27/0x3a platform_device_add+0x224/0x2b7 mfd_add_device+0x718/0x75b ? __kmalloc+0x144/0x16a ? mfd_add_devices+0x38/0xdb mfd_add_devices+0x9b/0xdb intel_lpss_probe+0x7d4/0x8ee intel_lpss_pci_probe+0xac/0xd4 pci_device_probe+0x101/0x18e ... Revert the offending patch until a more comprehensive solution is available. Cc: Tony Lindgren <tony@atomide.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Phil Edworthy <phil.edworthy@renesas.com> Fixes: d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Add ACPI support for uart on Broadcom SoCSrinath Mannam2018-08-021-0/+1
| | | | | | | | | | | | | | Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs to match the HID passed through ACPI tables to enable UART controller. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: always set baud rate in dw8250_set_termiosChen Hu2018-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is NULL. This happens during resume. Call Trace: ... [ 54.928108] dw8250_set_termios+0x162/0x170 [ 54.928114] serial8250_set_termios+0x17/0x20 [ 54.928117] uart_change_speed+0x64/0x160 [ 54.928119] uart_resume_port ... So the baud rate is not restored after S3 and breaks the apps who use UART, for example, console and bluetooth etc. We address this issue by setting the baud rate irrespective of arg "old", just like the drivers for other 8250 IPs. This is tested with Intel Broxton platform. Signed-off-by: Chen Hu <hu1.chen@intel.com> Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms") Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Add compatible string for Renesas RZ/N1 UARTPhil Edworthy2018-07-211-0/+1
| | | | | | | | | | The Renesas RZ/N1 UART is based on the Synopsys DW UART, but has additional registers for DMA. This patch does not address the changes required for DMA support, it simply adds the compatible string. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: add fractional divisor supportJisheng Zhang2018-07-121-0/+45
| | | | | | | | | | | | | | For Synopsys DesignWare 8250 uart which version >= 4.00a, there's a valid divisor latch fraction register. The fractional divisor width is 4bits ~ 6bits. Now the preparation is done, it's easy to add the feature support. This patch firstly tries to get the fractional divisor width during probe, then setups dw specific get_divisor() and set_divisor() hook. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Introduce IO accessors to extended registersAndy Shevchenko2018-07-071-8/+17
| | | | | | | | | | | There are several extended (in comparison to the traditional 16550) registers are present in Synopsys DesignWare UART. All of them are 32-bit ones. Introduce helpers to simplify access to them and convert existing users. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Fix runtime PM handlingPhil Edworthy2018-05-141-0/+4
| | | | | | | | | | | When using kgdb, you get an abort when accessing the UART registers. This is because the driver has already entered runtime PM and so turned off the bus clock needed to access the registers. To fix this, set the capability indicating Runtime PM is active while idle. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Limit dw8250_tx_wait_empty quirk to armada-38x devicesJoshua Scott2018-04-231-4/+27
| | | | | | | | | | | | | | | | | | | The previous implementation has had a detrimental effect on devices using high bitrates (bluetooth), as the fifo being non-empty for a single check would result in a 10 µs delay. Limit the change to devices with the new "marvell,armada-38x-uart" compatible string. Also update the code to allow the first 1000 retries to not perform a delay. The maximum duration of retries has been increased to cover a worst-case seen on the Armada 385 SoC. "dmesg ; resize", will fill the buffer with text to output before doing a resize. At 9600 baud this took up to 13 ms to flush all characters and avoid some getting lost. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Switch to use acpi_dev_present()Andy Shevchenko2018-03-091-11/+5
| | | | | | | | | | Special settings for APMC0D08 are applied when device is present in the system. To check its presence we may use acpi_dev_present() instead of current open coded variant. Cc: Feng Kan <fkan@apm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCRJoshua Scott2018-02-281-0/+18
| | | | | | | | | | | | | | | An issue has been observed on the Marvell Armada 38x serial port. Writes to UART_LCR can result in characters that are currently held in the TX FIFO being lost rather than sent, even if the userspace process has attempted to flush them. This is most visible when using the "resize" command (tested on Busybox), where we have observed the escape code for restoring cursor position becoming mangled. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Revert "Improve clock rate setting"Andy Shevchenko2018-01-221-18/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit de9e33bdfa22 ("serial: 8250_dw: Improve clock rate setting") obviously tries to cure symptoms, and not a root cause. The root cause is the non-flexible rate calculation inside the corresponding clock driver. What we need is to provide maximum UART divisor value to the clock driver to allow it do the job transparently to the caller. Since from the initial commit message I have got no clue which clock driver actually needs to be amended, I leave this exercise to the people who know better the case. Moreover, it seems [1] the fix introduced a regression. And possible even one more [2]. Taking above, revert the commit de9e33bdfa22 for now. [1]: https://www.spinics.net/lists/linux-serial/msg28872.html [2]: https://github.com/Dunedan/mbp-2016-linux/issues/29#issuecomment-357583782 Fixes: de9e33bdfa22 ("serial: 8250_dw: Improve clock rate setting") Cc: stable <stable@vger.kernel.org> # 4.15 Cc: Ed Blake <ed.blake@sondrel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Disable clock on errorStefan Potyra2017-12-151-1/+2
| | | | | | | | | | | If there is no clock rate for uartclk defined, disable the previously enabled clock again. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 23f5b3fdd04e serial: 8250_dw: only get the clock rate in one place Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: Remove redundant license textGreg Kroah-Hartman2017-11-081-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman2017-11-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Improve clock rate settingEd Blake2017-10-041-12/+18
| | | | | | | | | | | | | | | | Currently dw8250_set_termios sets the input clock to the nearest achievable rate to baudx16. If necessary, the input clock is then divided down to baudx16 using an integer divider within the UART device, with the divisor calculated in the 8250 core driver. However, the clock rate set by dw8250_set_termios and subsequently divided down could be considerably different to the target baudx16 rate, resulting in incorrect operation. This patch fixes this by iteratively searching for an input clock rate that is within +/-1.6% of an integer multiple of the target baudx16 rate. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: explicitly request exclusive reset controlPhilipp Zabel2017-07-301-1/+1
| | | | | | | | | | | | | | | | Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 4.11-rc4 into tty-nextGreg Kroah-Hartman2017-03-291-2/+7
|\ | | | | | | | | | | | | We want the tty/serial fixes in here to handle bugfixes and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: 8250_dw: Fix breakage when HAVE_CLK=nJames Hogan2017-03-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") recently broke the 8250_dw driver on platforms which don't select HAVE_CLK, as dw8250_set_termios() gets confused by the behaviour of the fallback HAVE_CLK=n clock API in linux/clk.h which pretends everything is fine but returns (valid) NULL clocks and 0 HZ clock rates. That 0 rate is written into the uartclk resulting in a crash at boot, e.g. on Cavium Octeon III based UTM-8 we get something like this: 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 25000000) is a OCTEON ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1 at drivers/tty/serial/serial_core.c:441 uart_get_baud_rate+0xfc/0x1f0 ... Call Trace: ... [<ffffffff8149c2e4>] uart_get_baud_rate+0xfc/0x1f0 [<ffffffff814a5098>] serial8250_do_set_termios+0xb0/0x440 [<ffffffff8149c710>] uart_set_options+0xe8/0x190 [<ffffffff814a6cdc>] serial8250_console_setup+0x84/0x158 [<ffffffff814a11ec>] univ8250_console_setup+0x54/0x70 [<ffffffff811901a0>] register_console+0x1c8/0x418 [<ffffffff8149f004>] uart_add_one_port+0x434/0x4b0 [<ffffffff814a1af8>] serial8250_register_8250_port+0x2d8/0x440 [<ffffffff814aa620>] dw8250_probe+0x388/0x5e8 ... The clock API is defined such that NULL is a valid clock handle so it wouldn't be right to check explicitly for NULL. Instead treat a clk_round_rate() return value of 0 as an error which prevents uartclk being overwritten. Fixes: 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: David Daney <david.daney@cavium.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-serial@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: bcm-kernel-feedback-list@broadcom.com Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jason Uy <jason.uy@broadcom.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termiosHeiko Stuebner2017-03-141-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_round_rate returns a signed long and may possibly return errors in it, for example if there is no possible rate. Till now dw8250_set_termios ignored any error, the signednes and would just use the value as input to clk_set_rate. This of course falls apart if there is an actual error, so check for errors and only try to set a rate if the value is actually valid. This turned up on some Rockchip platforms after commit 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") enabled set_termios callback in all cases, not only ACPI. Fixes: 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: simplify optional reset handlingPhilipp Zabel2017-03-171-8/+5
|/ | | | | | | | | | | | | As of commit bb475230b8e5 ("reset: make optional functions really optional"), the reset framework API calls use NULL pointers to describe optional, non-present reset controls. This allows to return errors from devm_reset_control_get_optional and to call reset_control_(de)assert unconditionally. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Avoid "too much work" from bogus rx timeout interruptDouglas Anderson2017-02-101-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a Rockchip rk3399-based board during suspend/resume testing, we found that we could get the console UART into a state where it would print this to the console a lot: serial8250: too much work for irq42 Followed eventually by: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 11s! Upon debugging I found that we're in this state: iir = 0x000000cc lsr = 0x00000060 It appears that somehow we have a RX Timeout interrupt but there is no actual data present to receive. When we're in this state the UART driver claims that it handled the interrupt but it actually doesn't really do anything. This means that we keep getting the interrupt over and over again. Normally we don't actually need to do anything special to handle a RX Timeout interrupt. We'll notice that there is some data ready and we'll read it, which will end up clearing the RX Timeout. In this case we have a problem specifically because we got the RX TImeout without any data. Reading a bogus byte is confirmed to get us out of this state. It's unclear how exactly the UART got into this state, but it is known that the UART lines are essentially undriven and unpowered during suspend, so possibly during resume some garbage / half transmitted bits are seen on the line and put the UART into this state. The UART on the rk3399 is a DesignWare based 8250 UART. From mailing list posts, it appears that other people have run into similar problems with DesignWare based IP. Presumably this problem is unique to that IP, so I have placed the workaround there to avoid possibly of accidentally triggering bad behavior on other IP. Also note the RX Timeout behaves very differently in the DMA case, for for now the workaround is only applied to the non-DMA case. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Allow hardware flow control to be usedJason Uy2017-01-191-3/+2
| | | | | | | | | | | | | | | | | | | | In the most common use case, the Synopsys DW UART driver does not set the set_termios callback function. This prevents UPSTAT_AUTOCTS from being set when the UART flag CRTSCTS is set. As a result, the driver will use software flow control as opposed to hardware flow control. To fix the problem, the set_termios callback function is set to the DW specific function. The logic to set UPSTAT_AUTOCTS is moved so that any clock error will not affect setting the hardware flow control. Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Jason Uy <jason.uy@broadcom.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Add support for IrDA SIR modeEd Blake2016-11-161-0/+22
| | | | | | | | | Add a set_ldisc function to enable/disable IrDA SIR mode according to the new line discipline, if IrDA SIR mode is supported by the hardware configuration. Signed-off-by: Ed Blake <ed.blake@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'tty-4.9-rc1' of ↵Linus Torvalds2016-10-031-23/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big tty and serial patch set for 4.9-rc1. It also includes some drivers/dma/ changes, as those were needed by some serial drivers, and they were all acked by the DMA maintainer. Also in here is the long-suffering ACPI SPCR patchset, which was passed around from maintainer to maintainer like a hot-potato. Seems I was the sucker^Wlucky one. All of those patches have been acked by the various subsystem maintainers as well. All of this has been in linux-next with no reported issues" * tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits) Revert "serial: pl011: add console matching function" MAINTAINERS: update entry for atmel_serial driver serial: pl011: add console matching function ARM64: ACPI: enable ACPI_SPCR_TABLE ACPI: parse SPCR and enable matching console of/serial: move earlycon early_param handling to serial Revert "drivers/tty: Explicitly pass current to show_stack" tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq nios2: dts: 10m50: Add tx-threshold parameter serial: 8250: Set Altera 16550 TX FIFO Threshold serial: 8250: of: Load TX FIFO Threshold from DT Documentation: dt: serial: Add TX FIFO threshold parameter drivers/tty: Explicitly pass current to show_stack serial: imx: Fix DCD reading serial: stm32: mark symbols static where possible serial: xuartps: Add some register initialisation to cdns_early_console_setup() serial: xuartps: Removed unwanted checks while reading the error conditions serial: xuartps: Rewrite the interrupt handling logic serial: stm32: use mapbase instead of membase for DMA tty/serial: atmel: fix fractional baud rate computation ...
| * serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 SoCKefeng Wang2016-09-021-0/+1
| | | | | | | | | | | | | | | | | | | | Add ACPI identifier for UART on Hisilicon Hip05 SoC, be careful that it is not 16550 compatible, and "reg-io-width" and "reg-shift" need be set properly by _DSD method in DSDT. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: 8250_dw: Use an unified new dev variable in probeKefeng Wang2016-09-011-22/+23
| | | | | | | | | | | | | | | | | | Use an unified new dev variable instead of &pdev->dev and p->dev in probe function. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: 8250_dw: Check the data->pclk when get apb_pclkKefeng Wang2016-08-311-1/+1
| | | | | | | | | | | | | | | | | | It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: Add quirk for APM X-Gene SoCHeikki Krogerus2016-09-011-5/+10
|/ | | | | | | | | | | | The APM X-Gene SoC UART is the only board that still needs the hard-coded values, so handle it separately in dw8250_quirks(). The other ACPI platforms are able to provide the values with device properties. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* serial: 8250_dw: fix wrong logic in dw8250_check_lcr()Kefeng Wang2016-05-031-3/+4
| | | | | | | | | | | | | | | Commit cdcea058e510 ("serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()") introduce a wrong logic when write val to LCR reg. When CONFIG_64BIT enabled, __raw_writeq is used unconditionally. The __raw_readq/__raw_writeq is introduced by commit bca2092d7897 ("serial: 8250_dw: Use 64-bit access for OCTEON.") for OCTEON. So for 64BIT && !PORT_OCTEON, we better to use coincident write function. Fixes: cdcea058e510("serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250dw: Add device HID for future AMD UART controllerWang Hongcheng2016-05-011-0/+1
| | | | | | | | | | Add device HID AMDI0020 to match the AMD ACPI Vendor ID (AMDI) as registered in http://www.uefi.org/acpi_id_list, and the UART controller on future AMD paltform will use the HID instead of AMD0020. Signed-off-by: Wang Hongcheng <annie.wang@amd.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: remove leftover definitionsAndy Shevchenko2016-03-071-6/+0
| | | | | | | | The clocks are managed through clk-fractional-divider.c module, and thus CLK framework takes care about it. Remove letfovers from this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: remove redundant 'else' keywordAndy Shevchenko2016-03-071-2/+3
| | | | | | | | When the main branch contains return statement the 'else' keyword is not needed. Remove it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Do not use readl/writel before checking port iotypeNoam Camus2016-02-061-2/+10
| | | | | | | | | Direct call to readl()/writel() is checked against iotype and in case of UPIO_MEM32BE we use ioread32be()/iowrite32be() instead of them. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Add support for big-endian MMIO accessesNoam Camus2016-02-061-0/+23
| | | | | | | | | | Add support for UPIO_MEM32BE in addition to UPIO_MEM32. For big endian we use 2 new accessors similar to little endian, called dw8250_serial_out32be() and dw8250_serial_in32be(). Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()Noam Camus2016-02-061-49/+42
| | | | | | | | | | | | | | With the help of Heikki we take common code that makes sure LCR write wasn't ignored and put it in new function called dw8250_check_lcr(). This function serves 3 serial_out routines: dw8250_serial_out(), dw8250_serial_out32(), and dw8250_serial_outq(). This patch only brings better code reuse. Signed-off-by: Noam Camus <noamc@ezchip.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'clk-for-linus-20151104' of ↵Linus Torvalds2015-11-051-4/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The majority of the changes are driver updates and new device support. The core framework is mostly unchanged this time around, with only a couple patches to expose a clk provider API and make getting clk parent names from DT more robust. Driver updates: - Support for clock controllers found on Broadcom Northstar SoCs and bcm2835 SoC - Support for Allwinner audio clocks - A few cleanup patches for Tegra drivers and support for the highest DFLL frequencies on Tegra124 - Samsung exynos7 fixes and improvements - i.Mx SoC updates to add a few missing clocks and keep debug uart clocks on during kernel intialization - Some mediatek cleanups and support for more subsystem clocks - Support for msm8916 gpu/audio clocks and qcom's GDSC power domain controllers - A new driver for the Silabs si514 clock chip" * tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (143 commits) clk: qcom: msm8960: Fix dsi1/2 halt bits clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks clk: lpc18xx-ccu: fix potential system hang when disabling unused clocks clk: Add clk_hw_is_enabled() for use by clk providers clk: Add stubs for of_clk_*() APIs when CONFIG_OF=n clk: versatile-icst: fix memory leak clk: Remove clk_{register,unregister}_multiplier() clk: iproc: define Broadcom NS2 iProc clock binding clk: iproc: define Broadcom NSP iProc clock binding clk: ns2: add clock support for Broadcom Northstar 2 SoC clk: iproc: Separate status and control variables clk: iproc: Split off dig_filter clk: iproc: Add PLL base write function clk: nsp: add clock support for Broadcom Northstar Plus SoC clk: iproc: Add PWRCTRL support clk: cygnus: Convert all macros to all caps ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled clk: imx31: add missing of_node_put clk: imx27: add missing of_node_put clk: si5351: add missing of_node_put ...
| * serial: 8250_dw: allow lower reference frequenciesAndy Shevchenko2015-10-021-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | We have couple of standard but rare used baudrates which are not supported by 1,8432MHz reference frequency. Besides that user can potentially ask for any baudrate (via BOTHER flag) and we currently don't fully support that. Since clk-fractional-divider is moved to use rational best approximation for reference frequency we may amend the driver to support whatever user wants. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | serial: 8250_dw: don't set UPF_BOOT_AUTOCONF flagHeikki Krogerus2015-10-041-1/+1
| | | | | | | | | | | | | | | | | | serial8250_register_8250_port adds it to all ports it registers. No need to set it separately. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: cleanup dw8250_setup_portHeikki Krogerus2015-10-041-33/+33
| | | | | | | | | | | | | | | | | | | | | | Using the same style of declaring variables as used in the other functions of the driver. Passing uart_port to the function instead of uart_8250_port, as it is the one mostly needed. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: cleanup dw8250_idma_filterHeikki Krogerus2015-10-041-6/+1
| | | | | | | | | | | | | | | | Remove the extra return. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: rename and comment the fallback dma filterHeikki Krogerus2015-10-041-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding comment where the purpose of the function is explained. The dma parameters are not used, so removing them, and also moving the assignment of the function to the same place where the other dw8250_data structures members are being set in dw8250_probe. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: proper support for UARTs without busy functionalityHeikki Krogerus2015-10-041-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the DW_apb_uart is configured with UART_16550_COMPATIBLE configuration parameter set, then the Busy Functionality is not available. These UARTs will never generate the Busy detect indication interrupt, and therefore don't need handling for it. This creates a small optimization for the DW_apb_uarts configured without the busy functionality, but more importantly, it removes the small but real risk of hitting potential issues caused by busy functionality handling when no busy functionality exist. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: add dw8250_quirks functionHeikki Krogerus2015-10-041-51/+31
| | | | | | | | | | | | | | | | | | | | | | | | Merging the DT and ACPI specific probe functions into dw8250_quirks. Those functions did not have that much code any more and some of the quirks need to be shared. This will also allow platforms without DT or ACPI to use the driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: only setup the port from one placeHeikki Krogerus2015-10-041-8/+6
| | | | | | | | | | | | | | | | | | | | | | This adds a flag "skip_autocfg" that the platforms that do not have the ADDITIONAL_FEATURES implemented can use to skip the port setup. It's then enough to call dw8250_setup_port just from dw8250_probe based on that flag. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: hook the DMA in one placeHeikki Krogerus2015-10-041-12/+7
| | | | | | | | | | | | | | | | | | Instead of assigning the dma member in dw8250_probe_of and dw8250_probe_acpi separately, assigning it in dw8250_probe. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: adapt to unified device property interfaceHeikki Krogerus2015-10-041-43/+37
| | | | | | | | | | | | | | | | | | This makes the properties available for all types of platforms instead of just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_dw: add separate pointer for the uart_port to dw8250_probeHeikki Krogerus2015-10-041-22/+20
|/ | | | | | | | | | For convenience, adding separate pointer for the "port" member of struct uart_8250_port that is being filled in the probe function. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial:8250_dw: do not alter CTS and DCTS since AFE is enabledQipeng Zha2015-08-141-22/+0
| | | | | | | | | | | Since the serial core is informed that this device is doing automatic flow control, it is not necessary to alter CTS and DCTS of the MSR as the core no longer attempts stop the port in uart_handle_cts_change(). Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250: Auto CTS control by HW if AFE enabledQipeng Zha2015-08-041-0/+5
| | | | | | | | | | | | | | | | | | | According to DesignWare 8250 spec, if auto flow control mode is enabled, a change in CTS does not cause an interrupt, so sw-assisted CTS flow control mode will not work properly. There reported an GPS firmware download failure issue, and we verified the root cause is, the default sw-assisted CTS flow control mode can not work properly since no interrupt when got CTS signal. This patch is to enable auto CTS mode by defaut if CRTSCTS is enable for DesignWare 8250 controller. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 17:53:28 +0000