summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
Commit message (Collapse)AuthorAgeFilesLines
* serial: sccnxp: Adds a delay between sequential read/write cyclesAlexander Shiyan2018-12-201-5/+27
| | | | | | | | | | | This patch adds a delay between sequential read/write cycles, to ensure the required minimum inactive time (tRWD). A time value from the datasheet has been added for each type of supported chips. The “inline” compiler attribute has been removed from the read/write functions, simply allow the compiler to control this. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: qcom_geni_serial: Fix UART hangRyan Case2018-12-201-0/+8
| | | | | | | | | | | | If a serial console write occured while a UART transmit command was waiting for a done signal then no further data would be sent until something new kicked the system into gear. If there is already data waiting in the circular buffer we must re-enable the tx watermark so we receive the expected interrupts. Signed-off-by: Ryan Case <ryandcase@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: qcom_geni_serial: Fix wrap around of TX bufferMatthias Kaehlcke2018-12-201-5/+7
| | | | | | | | | | | | | | | | | | | | | | | Before commit a1fee899e5bed ("tty: serial: qcom_geni_serial: Fix softlock") the size of TX transfers was limited to the TX FIFO size, and wrap arounds of the UART circular buffer were split into two transfers. With the commit wrap around are allowed within a transfer. The TX FIFO of the geni serial port uses a word size of 4 bytes. In case of a circular buffer wrap within a transfer the driver currently may write an incomplete word to the FIFO, with some bytes containing data from the circular buffer and others being zero. Since the transfer isn't completed yet the zero bytes are sent as if they were actual data. Handle wrap arounds of the TX buffer properly and ensure that words written to the TX FIFO always contain valid data (unless the transfer is completed). Fixes: a1fee899e5bed ("tty: serial: qcom_geni_serial: Fix softlock") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Tested-by: Ryan Case <ryandcase@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: max310x: Fix tx_empty() callbackAlexander Shiyan2018-12-191-5/+2
| | | | | | | | | | Function max310x_tx_empty() accesses the IRQSTS register, which is cleared by IC when reading, so if there is an interrupt status, we will lose it. This patch implement the transmitter check only by the current FIFO level. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: uartps: Fix interrupt mask issue to handle the RX interrupts properlyNava kishore Manne2018-12-191-2/+2
| | | | | | | | | | | This patch Correct the RX interrupt mask value to handle the RX interrupts properly. Fixes: c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: uartps: Fix error path when alloc failedMichal Simek2018-12-191-2/+4
| | | | | | | | | When cdns_uart_console allocation failed there is a need to also clear ID from ID list. Fixes: ae1cca3fa347 ("serial: uartps: Change uart ID port allocation") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: uartps: Check if the device is a consoleShubhrajyoti Datta2018-12-191-2/+2
| | | | | | | | | While checking for console_suspend_enabled also check if the device is a console. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: uartps: Add the device_init_wakeupShubhrajyoti Datta2018-12-191-0/+2
| | | | | | | | | | | | | | | Initialise the device wakeup. The device_init_wakeup is needed for the wakeup to work by default. Uart can be configured as the primary wakeup source so it is good to enable wakeup by default. The same functionality is enabled also by 8250_omap, atmel_serial, omap-serial and stm32-usart. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: samsung: Increase maximum baudrateSeung-Woo Kim2018-12-171-1/+1
| | | | | | | | | | This driver can be used to communicate with Bluetooth chip in high-speed UART mode, so increase the maximum baudrate to 3Mbps. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> [mszyprow: rephrased commit message] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: samsung: Properly set flags in autoCTS modeBeomho Seo2018-12-171-0/+3
| | | | | | | | | | | | | | Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support") has changed the way the autoCTS mode is handled. According to that change, serial drivers which enable H/W autoCTS mode must set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling TX. This patch adds proper handling of UPSTAT_AUTOCTS flag. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> [mszyprow: rephrased commit message] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Use of_node_name_{eq,prefix} for node name comparisonsRob Herring2018-12-173-8/+8
| | | | | | | | | | | | | | | | | | | | Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For hvc, the code can also be simplified by using of_stdout pointer instead of searching again for the stdout node. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-serial@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty/serial: do not free trasnmit buffer page under port lockSergey Senozhatsky2018-12-171-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LKP has hit yet another circular locking dependency between uart console drivers and debugobjects [1]: CPU0 CPU1 rhltable_init() __init_work() debug_object_init uart_shutdown() /* db->lock */ /* uart_port->lock */ debug_print_object() free_page() printk() call_console_drivers() debug_check_no_obj_freed() /* uart_port->lock */ /* db->lock */ debug_print_object() So there are two dependency chains: uart_port->lock -> db->lock And db->lock -> uart_port->lock This particular circular locking dependency can be addressed in several ways: a) One way would be to move debug_print_object() out of db->lock scope and, thus, break the db->lock -> uart_port->lock chain. b) Another one would be to free() transmit buffer page out of db->lock in UART code; which is what this patch does. It makes sense to apply a) and b) independently: there are too many things going on behind free(), none of which depend on uart_port->lock. The patch fixes transmit buffer page free() in uart_shutdown() and, additionally, in uart_port_startup() (as was suggested by Dmitry Safonov). [1] https://lore.kernel.org/lkml/20181211091154.GL23332@shao2-debian/T/#u Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Waiman Long <longman@redhat.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250: Rate limit serial port rx interrupts during input overrunsDarwin Dingel2018-12-173-1/+52
| | | | | | | | | | | | | | | | | | | When a serial port gets faulty or gets flooded with inputs, its interrupt handler starts to work double time to get the characters to the workqueue for the tty layer to handle them. When this busy time on the serial/tty subsystem happens during boot, where it is also busy on the userspace trying to initialise, some processes can continuously get preempted and will be on hold until the interrupts subside. The fix is to backoff on processing received characters for a specified amount of time when an input overrun is seen (received a new character before the previous one is processed). This only stops receive and will continue to transmit characters to serial port. After the backoff period is done, it receive will be re-enabled. This is optional and will only be enabled by setting 'overrun-throttle-ms' in the dts. Signed-off-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: qcom_geni_serial: Remove interrupt stormRyan Case2018-12-171-2/+23
| | | | | | | | | | | | | | | Disable M_TX_FIFO_WATERMARK_EN after we've sent all data for a given transaction so we don't continue to receive a flurry of free space interrupts while waiting for the M_CMD_DONE notification. Re-enable the watermark when establishing the next transaction. Also clear the watermark interrupt after filling the FIFO so we do not receive notification again prior to actually having free space. Signed-off-by: Ryan Case <ryandcase@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failureGeert Uytterhoeven2018-12-171-3/+8
| | | | | | | | | | | | | | On (H)SCIF, sci_submit_rx() is called in the receive interrupt handler. Hence if DMA submission fails, the interrupt handler should resume handling reception using PIO, else no more data is received. Make sci_submit_rx() return an error indicator, so the receive interrupt handler can act appropriately. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallbackGeert Uytterhoeven2018-12-171-1/+1
| | | | | | | | | | | | When falling back to PIO, active_rx must be set to a different value than cookie_rx[i], else sci_dma_rx_find_active() will incorrectly find a match, leading to a NULL pointer dereference in rx_timer_fn() later. Use zero instead, which is the same value as after driver initialization. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: sh-sci: Fix locking in sci_submit_rx()Geert Uytterhoeven2018-12-171-7/+9
| | | | | | | | | | | | | | | | | | | Some callers of sci_submit_rx() hold the port spinlock, others don't. During fallback to PIO, the driver needs to obtain the port spinlock. If the lock was already held, spinlock recursion is detected, causing a deadlock: BUG: spinlock recursion on CPU#0. Fix this by adding a flag parameter to sci_submit_rx() for the caller to indicate the port spinlock is already held, so spinlock recursion can be avoided. Move the spin_lock_irqsave() up, so all DMA disable steps are protected, which is safe as the recently introduced dmaengine_terminate_async() can be called in atomic context. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 4.20-rc6 into tty-nextGreg Kroah-Hartman2018-12-102-11/+9
|\ | | | | | | | | | | We want the TTY changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'tty-4.20-rc6' of ↵Linus Torvalds2018-12-092-11/+9
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty driver fixes from Greg KH: "Here are three small tty driver fixes for 4.20-rc6 Nothing major, just some bug fixes for reported issues. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var() tty: serial: 8250_mtk: always resume the device in probe. tty: do not set TTY_IO_ERROR flag if console port
| | * kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()Macpaul Lin2018-12-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is trying to fix KE issue due to "BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198" reported by Syzkaller scan." [26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198 [26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364 [26364:syz-executor0][name:report&] [26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0 [26364:syz-executor0]Call trace: [26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470 [26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30 [26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128 [26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8 [26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390 [26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20 [26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198 [26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270 [26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90 [26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158 [26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8 [26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0 [26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0 [26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8 [26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208 [26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]The buggy address belongs to the variable: [26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]Memory state around the buggy address: [26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 [26364:syz-executor0][name:report&] ^ [26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa [26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa [26364:syz-executor0][name:report&] [26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint [26364:syz-executor0]------------[cut here]------------ After checking the source code, we've found there might be an out-of-bounds access to "config[len - 1]" array when the variable "len" is zero. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * tty: serial: 8250_mtk: always resume the device in probe.Peter Shih2018-12-051-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | serial8250_register_8250_port calls uart_config_port, which calls config_port on the port before it tries to power on the port. So we need the port to be on before calling serial8250_register_8250_port. Change the code to always do a runtime resume in probe before registering port, and always do a runtime suspend in remove. This basically reverts the change in commit 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling"), but still use pm_runtime callbacks. Fixes: 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling") Signed-off-by: Peter Shih <pihsun@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | drivers/tty: add missing of_node_put()Yangtao Li2018-12-021-0/+1
| |/ | | | | | | | | | | | | | | | | of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Revert "tty: xilinx_uartps: Correct return value in probe"Greg Kroah-Hartman2018-12-061-12/+14
| | | | | | | | | | | | | | | | | | This reverts commit eca42d4cf3c591c36312c52707e0a712e0c7256a. During review it was rejected, so drop it from the tree. Cc: Rajan Vaja <RAJANV@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250-mtk: add uart DMA supportLong Cheng2018-12-051-1/+209
| | | | | | | | | | | | | | Modify uart register to support DMA function. Signed-off-by: Long Cheng <long.cheng@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: xilinx_uartps: Correct return value in probeRajan Vaja2018-12-051-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Existing driver checks for alternate clock if devm_clk_get() fails and returns error code for last clock failure. If xilinx_uartps is called before clock driver, devm_clk_get() returns -EPROBE_DEFER. In this case, probe should not check for alternate clock as main clock is already present in DTS and return -EPROBE_DEFER only. This patch fixes it by not checking for alternate clock when main clock get returns -EPROBE_DEFER. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: serial: qcom_geni_serial: Fix softlockRyan Case2018-12-051-17/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Transfers were being divided into device FIFO sized (64 byte max) operations which would poll for completion within a spin_lock_irqsave / spin_unlock_irqrestore block. This both made things slow by waiting for the FIFO to completely drain before adding further data and would also result in softlocks on large transmissions. This patch allows larger transfers with continuous FIFO additions as space becomes available and removes polling from the interrupt handler. Signed-off-by: Ryan Case <ryandcase@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Revert "serial/sunsu: add missing of_node_put()"Greg Kroah-Hartman2018-12-051-15/+5
| | | | | | | | | | | | | | | | | | | | This reverts commit 20d8e8611eb0596047fd4389be7a7203a883b9bf. As David Miller points out, it's wrong. Reported-by: David Miller <davem@davemloft.net> Cc: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: imx: fix error handling in console_setupStefan Agner2018-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | The ipg clock only needs to be unprepared in case preparing per clock fails. The ipg clock has already disabled at the point. Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: mvebu-uart: initialize over sampling stack registerMiquel Raynal2018-11-271-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The baudrate derivation relies on the state of the programmable over sampling stack (OSAMP register) being empty, while never initializing it. Set all the fields of this register to 0 (except reserved areas) to ensure a x16 divisor, as assumed by the driver. The suspend/resume callbacks are untouched because they already save/restore correctly this register. Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: mvebu-uart: clarify the baud rate derivationMiquel Raynal2018-11-271-8/+14
| | | | | | | | | | | | | | | | | | | | | | The current comment in ->set_baud_rate() is rather incomplete as it fails to describe what are the actual stages for the baudrate derivation. Replace this comment with something more explicit and close to the functional specification. Also adapt the variable names to it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial/sunsu: add missing of_node_put()Yangtao Li2018-11-271-5/+15
| | | | | | | | | | | | | | | | | | of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | drivers/tty: add missing of_node_put()Yangtao Li2018-11-271-0/+1
| | | | | | | | | | | | | | | | | | of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial-uartlite: fix null pointer dereference on pointer portColin Ian King2018-11-271-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Pointer port is dereferenced on port->private_data when assigning pointer pdata before port is null checked, leading to a potential null pointer dereference. Fix this by assigning pdata after the null pointer check on port. Detected by CoverityScan, CID#1475434 ("Dereference before null check") Fixes: 3b209d253e7f ("serial-uartlite: Do not use static struct uart_driver out of probe()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 4.20-rc2 into tty-nextGreg Kroah-Hartman2018-11-111-4/+4
|\| | | | | | | | | | | We want the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'tty-4.20-rc2' of ↵Linus Torvalds2018-11-101-4/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty fixes for 4.20-rc2 One of these missed the original 4.19-final release, I missed that I hadn't done a pull request for it as it was in linux-next and my branch for a long time, that's my fault. The others are small, fixing some reported issues and finally fixing the termios mess for alpha so that glibc has a chance to implement some missing functionality that has been pending for many years now. All of these have been in linux-next with no reported issues" * tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout arch/alpha, termios: implement BOTHER, IBSHIFT and termios2 termios, tty/tty_baudrate.c: fix buffer overrun vt: fix broken display when running aptitude serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
| | * serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeoutYoshihiro Shimoda2018-11-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMAGeert Uytterhoeven2018-10-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before the DMA channel pointer is initialized. Hence this fails, and the driver tries to fall back to PIO. However, at this early phase in the initialization sequence, fallback to PIO does not work, leading to a serial port that cannot receive any data. Fix this by calling sci_submit_rx() after initialization of the DMA channel pointer. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: Process sysrq at port unlock timeDouglas Anderson2018-11-094-8/+18
| | | | | | | | | | | | | | | | | | | | | | | | Let's take advantage of the new ("serial: core: Allow processing sysrq at port unlock time") to handle sysrqs more cleanly. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: qcom_geni_serial: Process sysrq at port unlock timeDouglas Anderson2018-11-091-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Let's take advantage of the new ("serial: core: Allow processing sysrq at port unlock time") to handle sysrqs more cleanly. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: qcom_geni_serial: Finish supporting sysrqDouglas Anderson2018-11-091-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The geni serial driver already had some sysrq code in it, but since SUPPORT_SYSRQ wasn't defined the code didn't do anything useful. Let's make it useful by adding that define using the same formula found in other serial drivers. In order to prevent deadlock, we'll take a page from the 'msm_serial.c' where the spinlock is released around uart_handle_sysrq_char(). This seemed better than copying from '8250_port.c' where we skip locking in the console_write function since the '8250_port.c' method can cause lockdep warnings when dropping into kgdb. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250Florian Fainelli2018-11-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is way too easy to miss enabling SERIAL_OF_PLATFORM which would result in the inability for the kernel to have a valid console device, which can be seen with: Warning: unable to open an initial console. and then: Run /init as init process Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 Since SERIAL_OF_PLATFORM already depends on SERIAL_8250 && OF there really is no drawback to defaulting this config to the value of SERIAL_8250. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: set suppress_bind_attrs flag only if builtinAnders Roxell2018-11-093-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init). devtmpfs gets killed because we try to remove a file and decrement the wb reference count before the noop_backing_device_info gets initialized. [ 0.332075] Serial: AMBA PL011 UART driver [ 0.485276] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1 [ 0.502382] console [ttyAMA0] enabled [ 0.515710] Unable to handle kernel paging request at virtual address 0000800074c12000 [ 0.516053] Mem abort info: [ 0.516222] ESR = 0x96000004 [ 0.516417] Exception class = DABT (current EL), IL = 32 bits [ 0.516641] SET = 0, FnV = 0 [ 0.516826] EA = 0, S1PTW = 0 [ 0.516984] Data abort info: [ 0.517149] ISV = 0, ISS = 0x00000004 [ 0.517339] CM = 0, WnR = 0 [ 0.517553] [0000800074c12000] user address but active_mm is swapper [ 0.517928] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 0.518305] Modules linked in: [ 0.518839] CPU: 0 PID: 13 Comm: kdevtmpfs Not tainted 4.19.0-rc5-next-20180928-00002-g2ba39ab0cd01-dirty #82 [ 0.519307] Hardware name: linux,dummy-virt (DT) [ 0.519681] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.519959] pc : __destroy_inode+0x94/0x2a8 [ 0.520212] lr : __destroy_inode+0x78/0x2a8 [ 0.520401] sp : ffff0000098c3b20 [ 0.520590] x29: ffff0000098c3b20 x28: 00000000087a3714 [ 0.520904] x27: 0000000000002000 x26: 0000000000002000 [ 0.521179] x25: ffff000009583000 x24: 0000000000000000 [ 0.521467] x23: ffff80007bb52000 x22: ffff80007bbaa7c0 [ 0.521737] x21: ffff0000093f9338 x20: 0000000000000000 [ 0.522033] x19: ffff80007bbb05d8 x18: 0000000000000400 [ 0.522376] x17: 0000000000000000 x16: 0000000000000000 [ 0.522727] x15: 0000000000000400 x14: 0000000000000400 [ 0.523068] x13: 0000000000000001 x12: 0000000000000001 [ 0.523421] x11: 0000000000000000 x10: 0000000000000970 [ 0.523749] x9 : ffff0000098c3a60 x8 : ffff80007bbab190 [ 0.524017] x7 : ffff80007bbaa880 x6 : 0000000000000c88 [ 0.524305] x5 : ffff0000093d96c8 x4 : 61c8864680b583eb [ 0.524567] x3 : ffff0000093d6180 x2 : ffffffffffffffff [ 0.524872] x1 : 0000800074c12000 x0 : 0000800074c12000 [ 0.525207] Process kdevtmpfs (pid: 13, stack limit = 0x(____ptrval____)) [ 0.525529] Call trace: [ 0.525806] __destroy_inode+0x94/0x2a8 [ 0.526108] destroy_inode+0x34/0x88 [ 0.526370] evict+0x144/0x1c8 [ 0.526636] iput+0x184/0x230 [ 0.526871] dentry_unlink_inode+0x118/0x130 [ 0.527152] d_delete+0xd8/0xe0 [ 0.527420] vfs_unlink+0x240/0x270 [ 0.527665] handle_remove+0x1d8/0x330 [ 0.527875] devtmpfsd+0x138/0x1c8 [ 0.528085] kthread+0x14c/0x158 [ 0.528291] ret_from_fork+0x10/0x18 [ 0.528720] Code: 92800002 aa1403e0 d538d081 8b010000 (c85f7c04) [ 0.529367] ---[ end trace 5a3dee47727f877c ]--- Rework to set suppress_bind_attrs flag to avoid removing the device when CONFIG_DEBUG_TEST_DRIVER_REMOVE=y. This applies for pic32_uart and xilinx_uartps as well. Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | pch_uart: remove set but not used variable 'tx_empty'zhong jiang2018-11-091-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | tx_empty is not used after setting its value. It is safe to remove the unused variable. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | tty: serial: qcom_geni_serial: simplify getting .driver_dataWolfram Sang2018-11-091-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | tty: serial: qcom_geni_serial: Rectify UART suspend mechanismMukesh Kumar Savaliya2018-11-091-30/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UART driver checks for the PM state and denies suspend if state is ACTIVE. This makes UART to deny suspend when client keeps port open which is not correct. Instead follow framework and obey suspend-resume callbacks. Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | tty: serial: qcom_geni_serial: Don't slow all ports just for kgdbDouglas Anderson2018-11-091-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you turn on CONFIG_KGDB then you'll get CONFIG_CONSOLE_POLL selected. If you have CONFIG_CONSOLE_POLL selected then the GENI serial driver was setting RX_BYTES_PW to 1 for _all_ UART ports. This doesn't seem like such a good idea. Let's only set RX_BYTES_PW to 1 for the console port. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: tegra: fix some spelling mistakesMarcel Ziswiler2018-11-091-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Fix a few spelling mistakes I stumbled upon while debugging a customers UART issues. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: fsl_lpuart: clear parity enable bit when disable parityAndy Duan2018-11-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current driver only enable parity enable bit and never clear it when user set the termios. The fix clear the parity enable bit when PARENB flag is not set in termios->c_cflag. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andy Duan <fugang.duan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PEAndy Duan2018-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the typo: UARTCR1_PE -> UARTCTRL_PE There have no function impacted since the macro define value is the same. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andy Duan <fugang.duan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial-uartlite: Fix the unbind pathShubhrajyoti Datta2018-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the clocks are not enabled at probe but when the port is used. Remove the unconditional disable at remove. Fixes the below [ 77.660196] ------------[ cut here ]------------ [ 77.664749] WARNING: CPU: 0 PID: 1992 at drivers/clk/clk.c:622 clk_core_disable+0x78/0x80 [ 77.672892] Modules linked in: [ 77.675930] CPU: 0 PID: 1992 Comm: sh Not tainted 4.14.0 #23 [ 77.681570] Hardware name: xlnx,zynqmp (DT) [ 77.685736] task: ffffffc879e2e580 task.stack: ffffff800be30000 [ 77.691641] PC is at clk_core_disable+0x78/0x80 Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-20 15:50:29 +0000