summaryrefslogtreecommitdiffstats
path: root/drivers/usb/core
Commit message (Collapse)AuthorAgeFilesLines
* USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORTOliver Neukum2024-01-271-11/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | The OTG 1.3 spec has the feature A_ALT_HNP_SUPPORT, which tells a device that it is connected to the wrong port. Some devices refuse to operate if you enable that feature, because it indicates to them that they ought to request to be connected to another port. According to the spec this feature may be used based only the following three conditions: 6.5.3 a_alt_hnp_support Setting this feature indicates to the B-device that it is connected to an A-device port that is not capable of HNP, but that the A-device does have an alternate port that is capable of HNP. The A-device is required to set this feature under the following conditions: • the A-device has multiple receptacles • the A-device port that connects to the B-device does not support HNP • the A-device has another port that does support HNP A check for the third and first condition is missing. Add it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@kernel.org> Fixes: 7d2d641c44269 ("usb: otg: don't set a_alt_hnp_support feature for OTG 2.0 device") Link: https://lore.kernel.org/r/20240122153545.12284-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: Prevent null pointer dereference in update_port_device_stateUdipto Goswami2024-01-271-3/+13
| | | | | | | | | | | | | | | | | Currently, the function update_port_device_state gets the usb_hub from udev->parent by calling usb_hub_to_struct_hub. However, in case the actconfig or the maxchild is 0, the usb_hub would be NULL and upon further accessing to get port_dev would result in null pointer dereference. Fix this by introducing an if check after the usb_hub is populated. Fixes: 83cb2604f641 ("usb: core: add sysfs entry for usb device state") Cc: stable@vger.kernel.org Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240110095814.7626-1-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: core: Use device_driver directly in struct usb_driver and usb_device_driverYajun Deng2024-01-043-36/+33
| | | | | | | | | | | | | | | | | | | There is usbdrv_wrap in struct usb_driver and usb_device_driver, it contains device_driver and for_devices. for_devices is used to distinguish between device drivers and interface drivers. Like the is_usb_device(), it tests the type of the device. We can test that if the probe of device_driver is equal to usb_probe_device in is_usb_device_driver(), and then the struct usbdrv_wrap is no longer needed. Clean up struct usbdrv_wrap, use device_driver directly in struct usb_driver and usb_device_driver. This makes the code cleaner. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240104032822.1896596-1-yajun.deng@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: Fix crash w/ usb_choose_configuration() if no driverDouglas Anderson2023-12-151-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It's possible that usb_choose_configuration() can get called when a USB device has no driver. In this case the recent commit a87b8e3be926 ("usb: core: Allow subclassed USB drivers to override usb_choose_configuration()") can cause a crash since it dereferenced the driver structure without checking for NULL. Let's add a check. A USB device with no driver is an anomaly, so make usb_choose_configuration() return immediately if there is no driver. This was seen in the real world when usbguard got ahold of a r8152 device at the wrong time. It can also be simulated via this on a computer with one r8152-based USB Ethernet adapter: cd /sys/bus/usb/drivers/r8152-cfgselector to_unbind="$(ls -d *-*)" real_dir="$(readlink -f "${to_unbind}")" echo "${to_unbind}" > unbind cd "${real_dir}" echo 0 > authorized echo 1 > authorized Fixes: a87b8e3be926 ("usb: core: Allow subclassed USB drivers to override usb_choose_configuration()") Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20231211073237.v3.1.If27eb3bf7812f91ab83810f232292f032f4203e0@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hubHardik Gajjar2023-12-061-0/+29
| | | | | | | | | | | | | | | | | | | | | | | There is a potential delay in notifying Linux USB drivers of downstream USB bus activity when connecting a high-speed or superSpeed device via the Microchip USB491x hub. This delay is due to the fixed bInterval value of 12 in the silicon of the Microchip USB491x hub. Microchip requested to ignore the device descriptor and decrease that value to 9 as it was too late to modify that in silicon. This patch speeds up the USB enummeration process that helps to pass Apple Carplay certifications and improve the User experience when utilizing the USB device via Microchip Multihost USB491x Hub. A new hub quirk HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL speeds up the notification process for Microchip USB491x hub by limiting the maximum bInterval value to 9. Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231205181829.127353-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hub: Replace hardcoded quirk value with BIT() macroHardik Gajjar2023-12-061-2/+2
| | | | | | | | | | This patch replaces the hardcoded quirk value in the macro with BIT(). Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: Allow subclassed USB drivers to override usb_choose_configuration()Douglas Anderson2023-12-041-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | For some USB devices we might want to do something different for usb_choose_configuration(). One example here is the r8152 driver where we want to end up using the vendor driver with the preferred interface. The r8152 driver tried to make things work by implementing a USB generic_subclass driver and then overriding the normal config selection after it happened. This is less than ideal and also caused breakage if someone deauthorized and re-authorized the USB device because the USB core ended up going back to it's default logic for choosing the best config. I made an attempt to fix this [1] but it was a bit ugly. Let's do this better and allow USB generic_subclass drivers to override usb_choose_configuration(). [1] https://lore.kernel.org/r/20231130154337.1.Ie00e07f07f87149c9ce0b27ae4e26991d307e14b@changeid Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231201102946.v2.2.Iade5fa31997f1a0ca3e1dec0591633b02471df12@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: Don't force USB generic_subclass drivers to define probe()Douglas Anderson2023-12-041-1/+4
| | | | | | | | | | | | There's no real reason that subclassed USB drivers _need_ to define probe() since they might want to subclass for some other reason. Make it optional to define probe() if we're a generic_subclass. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231201102946.v2.1.I7ea0dd55ee2acdb48b0e6d28c1a704ab2c29206f@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 6.7-rc3 into usb-nextGreg Kroah-Hartman2023-11-272-24/+2
|\ | | | | | | | | | | | | We need the USB/PHY/Thunderbolt fixes in here as well for later patches to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: config: fix iteration issue in 'usb_get_bos_descriptor()'Niklas Neronin2023-11-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BOS descriptor defines a root descriptor and is the base descriptor for accessing a family of related descriptors. Function 'usb_get_bos_descriptor()' encounters an iteration issue when skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in the same descriptor being read repeatedly. To address this issue, a 'goto' statement is introduced to ensure that the pointer and the amount read is updated correctly. This ensures that the function iterates to the next descriptor instead of reading the same descriptor repeatedly. Cc: stable@vger.kernel.org Fixes: 3dd550a2d365 ("USB: usbcore: Fix slab-out-of-bounds bug during device reset") Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231115121325.471454-1-niklas.neronin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "usb: phy: add usb phy notify port status API"Johan Hovold2023-11-061-23/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit a08799cf17c22375752abfad3b4a2b34b3acb287. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new notification interface which is broken by design. Fixes: a08799cf17c2 ("usb: phy: add usb phy notify port status API") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang <stanley_chang@realtek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231106110654.31090-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: new quirk to reduce the SET_ADDRESS request timeoutHardik Gajjar2023-11-232-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a new USB quirk, USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value for the SET_ADDRESS request. The standard timeout for USB request/command is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1). However, certain scenarios, such as connecting devices through an APTIV hub, can lead to timeout errors when the device enumerates as full speed initially and later switches to high speed during chirp negotiation. In such cases, USB analyzer logs reveal that the bus suspends for 5 seconds due to incorrect chirp parsing and resumes only after two consecutive timeout errors trigger a hub driver reset. Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us) _______| Time Stamp(28 . 105 910 682) _______|_____________________________________________________________Ch0 Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us) _______| Time Stamp(28 . 106 910 632) _______|_____________________________________________________________Ch0 Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us) _______| Time Stamp(28 . 107 910 600) _______|_____________________________________________________________Ch0 Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms) _______| Time Stamp(28 . 108 532 832) _______|_____________________________________________________________Ch0 Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us) _______| Time Stamp(28 . 247 657 600) _______|_____________________________________________________________Ch0 This 5-second delay in device enumeration is undesirable, particularly in automotive applications where quick enumeration is crucial (ideally within 3 seconds). The newly introduced quirks provide the flexibility to align with a 3-second time limit, as required in specific contexts like automotive applications. By reducing the SET_ADDRESS request timeout to 500 ms, the system can respond more swiftly to errors, initiate rapid recovery, and ensure efficient device enumeration. This change is vital for scenarios where rapid smartphone enumeration and screen projection are essential. To use the quirk, please write "vendor_id:product_id:p" to /sys/bus/usb/drivers/hub/module/parameter/quirks For example, echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks" Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: Add timeout argument in address_device USB HCD callbackHardik Gajjar2023-11-231-1/+1
|/ | | | | | | | | | | | | | | | | | - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-6.7-rc1' of ↵Linus Torvalds2023-11-034-6/+26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...
| * usb: core: Remove duplicated check in usb_hub_create_port_deviceHeiner Kallweit2023-10-211-2/+1
| | | | | | | | | | | | | | | | Simplify the code by not calling hub_is_superspeed() twice. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b1d77cbc-faa3-4d07-94ff-f6ffb85c6964@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: Inform the USB Type-C class about enumerated devicesHeikki Krogerus2023-10-163-2/+24
| | | | | | | | | | | | | | | | | | | | | | The Type-C port drivers can make PM related decisions based on is the device USB3 or USB2. Suggested-by: Benson Leung <bleung@chromium.org> Tested-by: Benson Leung <bleung@chromium.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231011105825.320062-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge 6.6-rc6 into usb-nextGreg Kroah-Hartman2023-10-162-4/+23
| |\ | | | | | | | | | | | | | | | We need the USB and Thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirkNiklas Schnelle2023-10-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. In the pci-quirks case the I/O port acceses are used in the quirks for several AMD south bridges, Add a config option for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230911125653.1393895-3-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'vfs-6.7.ctime' of ↵Linus Torvalds2023-10-301-9/+17
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs Pull vfs inode time accessor updates from Christian Brauner: "This finishes the conversion of all inode time fields to accessor functions as discussed on list. Changing timestamps manually as we used to do before is error prone. Using accessors function makes this robust. It does not contain the switch of the time fields to discrete 64 bit integers to replace struct timespec and free up space in struct inode. But after this, the switch can be trivially made and the patch should only affect the vfs if we decide to do it" * tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits) fs: rename inode i_atime and i_mtime fields security: convert to new timestamp accessors selinux: convert to new timestamp accessors apparmor: convert to new timestamp accessors sunrpc: convert to new timestamp accessors mm: convert to new timestamp accessors bpf: convert to new timestamp accessors ipc: convert to new timestamp accessors linux: convert to new timestamp accessors zonefs: convert to new timestamp accessors xfs: convert to new timestamp accessors vboxsf: convert to new timestamp accessors ufs: convert to new timestamp accessors udf: convert to new timestamp accessors ubifs: convert to new timestamp accessors tracefs: convert to new timestamp accessors sysv: convert to new timestamp accessors squashfs: convert to new timestamp accessors server: convert to new timestamp accessors client: convert to new timestamp accessors ...
| * | usb: convert to new timestamp accessorsJeff Layton2023-10-181-9/+17
| |/ | | | | | | | | | | | | | | Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-12-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
* / usb: hub: Guard against accesses to uninitialized BOS descriptorsRicardo Cañuelo2023-10-022-4/+23
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230830100418.1952143-1-ricardo.canuelo@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-6.6-rc1' of ↵Linus Torvalds2023-09-0112-419/+307
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt / PHY driver updates from Greg KH: "Here is the big set of USB, Thunderbolt, and PHY driver updates for 6.6-rc1. Included in here are: - PHY driver additions and cleanups - Thunderbolt minor additions and fixes - USB MIDI 2 gadget support added - dwc3 driver updates and additions - Removal of some old USB wireless code that was missed when that codebase was originally removed a few years ago, cleaning up some core USB code paths - USB core potential use-after-free fixes that syzbot from different people/groups keeps tripping over - typec updates and additions - gadget fixes and cleanups - loads of smaller USB core and driver cleanups all over the place Full details are in the shortlog. All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) platform/chrome: cros_ec_typec: Configure Retimer cable type tcpm: Avoid soft reset when partner does not support get_status usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: set initial svdm version based on pd revision USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) usb: dwc2: add pci_device_id driver_data parse support usb: gadget: remove max support speed info in bind operation usb: gadget: composite: cleanup function config_ep_by_speed_and_alt() usb: gadget: config: remove max speed check in usb_assign_descriptors() usb: gadget: unconditionally allocate hs/ss descriptor in bind operation usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind() usb: gadget: add a inline function gether_bitrate() usb: gadget: use working speed to calcaulate network bitrate and qlen dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support usb: dwc3: exynos: Add support for Exynos850 variant usb: gadget: udc-xilinx: fix incorrect type in assignment warning usb: gadget: udc-xilinx: fix cast from restricted __le16 warning usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning USB: dwc2: hande irq on dead controller correctly ...
| * usb: core: Use module_led_trigger macro to simplify the codeLi Zetao2023-08-221-12/+1
| | | | | | | | | | | | | | | | | | Use the module_led_trigger macro to simplify the code, which is the same as declaring with module_init() and module_exit(). Signed-off-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20230815074648.1015175-1-lizetao1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: core: Fix oversight in SuperSpeed initializationAlan Stern2023-08-121-12/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") altered the way USB devices are enumerated following detection, and in the process it messed up the initialization of SuperSpeed (or faster) devices: [ 31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [ 31.663107] usb 2-1: device descriptor read/8, error -71 [ 31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd [ 31.965122] usb 2-1: device descriptor read/8, error -71 [ 32.080991] usb usb2-port1: attempt power cycle ... The problem was caused by the commit forgetting that in SuperSpeed or faster devices, the device descriptor uses a logarithmic encoding of the bMaxPacketSize0 value. (For some reason I thought the 255 case in the switch statement was meant for these devices, but it isn't -- it was meant for Wireless USB and is no longer needed.) We can fix the oversight by testing for buf->bMaxPacketSize0 = 9 (meaning 512, the actual maxpacket size for ep0 on all SuperSpeed devices) and straightening out the logic that checks and adjusts our initial guesses of the maxpacket value. Reported-and-tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Closes: https://lore.kernel.org/linux-usb/20230810002257.nadxmfmrobkaxgnz@synopsys.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Link: https://lore.kernel.org/r/8809e6c5-59d5-4d2d-ac8f-6d106658ad73@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: core: Fix unused variable warning in usb_alloc_dev()Alan Stern2023-08-121-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The kernel test robot reported that a recent commit caused a "variable set but not used" warning. As a result of that commit, the variable no longer serves any purpose; it should be removed. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308092350.HR4PVHUt-lkp@intel.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 1e4c574225cc ("USB: Remove remnants of Wireless USB and UWB") Link: https://lore.kernel.org/r/7223cc66-f006-42ae-9f30-a6c546bf97a7@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: Remove remnants of Wireless USB and UWBAlan Stern2023-08-097-185/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wireless USB has long been defunct, and kernel support for it was removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and UWB from the kernel tree."). Nevertheless, some vestiges of the old implementation still clutter up the USB subsystem and one or two other places. Let's get rid of them once and for all. The only parts still left are the user-facing APIs in include/uapi/linux/usb/ch9.h. (There are also a couple of misleading instances, such as the Sierra Wireless USB modem, which is a USB modem made by Sierra Wireless.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: core: Fix race by not overwriting udev->descriptor in hub_port_init()Alan Stern2023-08-081-44/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors(): BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011 CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 ... Allocated by task 758: ... __do_kmalloc_node mm/slab_common.c:966 [inline] __kmalloc+0x5e/0x190 mm/slab_common.c:979 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:680 [inline] usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887 usb_enumerate_device drivers/usb/core/hub.c:2407 [inline] usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545 As analyzed by Khazhy Kumykov, the cause of this bug is a race between read_descriptors() and hub_port_init(): The first routine uses a field in udev->descriptor, not expecting it to change, while the second overwrites it. Prior to commit 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file") this race couldn't occur, because the routines were mutually exclusive thanks to the device locking. Removing that locking from read_descriptors() exposed it to the race. The best way to fix the bug is to keep hub_port_init() from changing udev->descriptor once udev has been initialized and registered. Drivers expect the descriptors stored in the kernel to be immutable; we should not undermine this expectation. In fact, this change should have been made long ago. So now hub_port_init() will take an additional argument, specifying a buffer in which to store the device descriptor it reads. (If udev has not yet been initialized, the buffer pointer will be NULL and then hub_port_init() will store the device descriptor in udev as before.) This eliminates the data race responsible for the out-of-bounds read. The changes to hub_port_init() appear more extensive than they really are, because of indentation changes resulting from an attempt to avoid writing to other parts of the usb_device structure after it has been initialized. Similar changes should be made to the code that reads the BOS descriptor, but that can be handled in a separate patch later on. This patch is sufficient to fix the bug found by syzbot. Reported-and-tested-by: syzbot+18996170f8096c6174d0@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000c0ffe505fe86c9ca@google.com/#r Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Khazhy Kumykov <khazhy@google.com> Fixes: 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/b958b47a-9a46-4c22-a9f9-e42e42c31251@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: core: Change usb_get_device_descriptor() APIAlan Stern2023-08-084-43/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb_get_device_descriptor() routine reads the device descriptor from the udev device and stores it directly in udev->descriptor. This interface is error prone, because the USB subsystem expects in-memory copies of a device's descriptors to be immutable once the device has been initialized. The interface is changed so that the device descriptor is left in a kmalloc-ed buffer, not copied into the usb_device structure. A pointer to the buffer is returned to the caller, who is then responsible for kfree-ing it. The corresponding changes needed in the various callers are fairly small. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/d0111bb6-56c1-4f90-adf2-6cfe152f6561@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: core: Unite old scheme and new scheme descriptor readsAlan Stern2023-08-081-79/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for reworking the usb_get_device_descriptor() routine, it is desirable to unite the two different code paths responsible for initially determining endpoint 0's maximum packet size in a newly discovered USB device. Making this determination presents a chicken-and-egg sort of problem, in that the only way to learn the maxpacket value is to get it from the device descriptor retrieved from the device, but communicating with the device to retrieve a descriptor requires us to know beforehand the ep0 maxpacket size. In practice this problem is solved in two different ways, referred to in hub.c as the "old scheme" and the "new scheme". The old scheme (which is the approach recommended by the USB-2 spec) involves asking the device to send just the first eight bytes of its device descriptor. Such a transfer uses packets containing no more than eight bytes each, and every USB device must have an ep0 maxpacket size >= 8, so this should succeed. Since the bMaxPacketSize0 field of the device descriptor lies within the first eight bytes, this is all we need. The new scheme is an imitation of the technique used in an early Windows USB implementation, giving it the happy advantage of working with a wide variety of devices (some of them at the time would not work with the old scheme, although that's probably less true now). It involves making an initial guess of the ep0 maxpacket size, asking the device to send up to 64 bytes worth of its device descriptor (which is only 18 bytes long), and then resetting the device to clear any error condition that might have resulted from the guess being wrong. The initial guess is determined by the connection speed; it should be correct in all cases other than full speed, for which the allowed values are 8, 16, 32, and 64 (in this case the initial guess is 64). The reason for this patch is that the old- and new-scheme parts of hub_port_init() use different code paths, one involving usb_get_device_descriptor() and one not, for their initial reads of the device descriptor. Since these reads have essentially the same purpose and are made under essentially the same circumstances, this is illogical. It makes more sense to have both of them use a common subroutine. This subroutine does basically what the new scheme's code did, because that approach is more general than the one used by the old scheme. It only needs to know how many bytes to transfer and whether or not it is being called for the first iteration of a retry loop (in case of certain time-out errors). There are two main differences from the former code: We initialize the bDescriptorType field of the transfer buffer to 0 before performing the transfer, to avoid possibly accessing an uninitialized value afterward. We read the device descriptor into a temporary buffer rather than storing it directly into udev->descriptor, which the old scheme implementation used to do. Since the whole point of this first read of the device descriptor is to determine the bMaxPacketSize0 value, that is what the new routine returns (or an error code). The value is stored in a local variable rather than in udev->descriptor. As a side effect, this necessitates moving a section of code that checks the bcdUSB field for SuperSpeed devices until after the full device descriptor has been retrieved. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/495cb5d4-f956-4f4a-a875-1e67e9489510@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge 6.5-rc4 into usb-nextGreg Kroah-Hartman2023-07-311-0/+4
| |\ | | | | | | | | | | | | | | | | | | We need the USB fixes in here for testing and for other patches to be applied on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: phy: add usb phy notify port status APIStanley Chang2023-07-261-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In Realtek SoC, the parameter of usb phy is designed to can dynamic tuning base on port status. Therefore, add a notify callback of phy driver when usb port status change. The Realtek phy driver is designed to dynamically adjust disconnection level and calibrate phy parameters. When the device connected bit changes and when the disconnected bit changes, do port status change notification: Check if portstatus is USB_PORT_STAT_CONNECTION and portchange is USB_PORT_STAT_C_CONNECTION. 1. The device is connected, the driver lowers the disconnection level and calibrates the phy parameters. 2. The device disconnects, the driver increases the disconnect level and calibrates the phy parameters. When controller to notify connect that device is already ready. If we adjust the disconnection level in notify_connect, the disconnect may have been triggered at this stage. So we need to change that as early as possible. The status change of connection is before port reset. Therefore, we add an api to notify phy the port status changes. In this stage, the device is not port enable, and it will not trigger disconnection. Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20230725033318.8361-1-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: Explicitly include correct DT includesRob Herring2023-07-253-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | USB: make usb class a const structureIvan Orlov2023-07-253-61/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the driver core allows for struct class to be in read-only memory, remove the usb_class structure and create the usbmisc_class const class structure declared at build time which places it into read-only memory, instead of having it to be dynamically allocated at load time. Additionally, now we register usb class at startup and unregister it when shutting down, so we don't have to count uses of the class. Therefore we don't need the 'usb_class' structure anymore. Due to this fact, remove all static functions related to class initialization and deinitialization. We can't use them in 'usb.c' since they are static and we don't really need them anymore. Since we have to register the class in usb_init function in 'usb.c' and use it in 'file.c' as well, declare the usbmisc_class structure as 'export' in the 'usb.h' file. Debatable moment: the class registration and unregistration functions could be extracted to the 'file.c'. I think we don't want to do this since it would be one-line functions. They would make the code paths more confusing and add calling overhead. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230621202514.1223670-1-ivan.orlov0322@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'v6.6-vfs.ctime' of ↵Linus Torvalds2023-08-281-8/+8
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs timestamp updates from Christian Brauner: "This adds VFS support for multi-grain timestamps and converts tmpfs, xfs, ext4, and btrfs to use them. This carries acks from all relevant filesystems. The VFS always uses coarse-grained timestamps when updating the ctime and mtime after a change. This has the benefit of allowing filesystems to optimize away a lot of metadata updates, down to around 1 per jiffy, even when a file is under heavy writes. Unfortunately, this has always been an issue when we're exporting via NFSv3, which relies on timestamps to validate caches. A lot of changes can happen in a jiffy, so timestamps aren't sufficient to help the client decide to invalidate the cache. Even with NFSv4, a lot of exported filesystems don't properly support a change attribute and are subject to the same problems with timestamp granularity. Other applications have similar issues with timestamps (e.g., backup applications). If we were to always use fine-grained timestamps, that would improve the situation, but that becomes rather expensive, as the underlying filesystem would have to log a lot more metadata updates. This introduces fine-grained timestamps that are used when they are actively queried. This uses the 31st bit of the ctime tv_nsec field to indicate that something has queried the inode for the mtime or ctime. When this flag is set, on the next mtime or ctime update, the kernel will fetch a fine-grained timestamp instead of the usual coarse-grained one. As POSIX generally mandates that when the mtime changes, the ctime must also change the kernel always stores normalized ctime values, so only the first 30 bits of the tv_nsec field are ever used. Filesytems can opt into this behavior by setting the FS_MGTIME flag in the fstype. Filesystems that don't set this flag will continue to use coarse-grained timestamps. Various preparatory changes, fixes and cleanups are included: - Fixup all relevant places where POSIX requires updating ctime together with mtime. This is a wide-range of places and all maintainers provided necessary Acks. - Add new accessors for inode->i_ctime directly and change all callers to rely on them. Plain accesses to inode->i_ctime are now gone and it is accordingly rename to inode->__i_ctime and commented as requiring accessors. - Extend generic_fillattr() to pass in a request mask mirroring in a sense the statx() uapi. This allows callers to pass in a request mask to only get a subset of attributes filled in. - Rework timestamp updates so it's possible to drop the @now parameter the update_time() inode operation and associated helpers. - Add inode_update_timestamps() and convert all filesystems to it removing a bunch of open-coding" * tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits) btrfs: convert to multigrain timestamps ext4: switch to multigrain timestamps xfs: switch to multigrain timestamps tmpfs: add support for multigrain timestamps fs: add infrastructure for multigrain timestamps fs: drop the timespec64 argument from update_time xfs: have xfs_vn_update_time gets its own timestamp fat: make fat_update_time get its own timestamp fat: remove i_version handling from fat_update_time ubifs: have ubifs_update_time use inode_update_timestamps btrfs: have it use inode_update_timestamps fs: drop the timespec64 arg from generic_update_time fs: pass the request_mask to generic_fillattr fs: remove silly warning from current_time gfs2: fix timestamp handling on quota inodes fs: rename i_ctime field to __i_ctime selinux: convert to ctime accessor functions security: convert to ctime accessor functions apparmor: convert to ctime accessor functions sunrpc: convert to ctime accessor functions ...
| * | usb: convert to ctime accessor functionsJeff Layton2023-07-131-8/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230705190309.579783-18-jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
* / USB: quirks: add quirk for Focusrite ScarlettŁukasz Bartosik2023-07-251-0/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Focusrite Scarlett audio device does not behave correctly during resumes. Below is what happens during every resume (captured with Beagle 5000): <Suspend> <Resume> <Reset>/<Chirp J>/<Tiny J> <Reset/Target disconnected> <High Speed> The Scarlett disconnects and is enumerated again. However from time to time it drops completely off the USB bus during resume. Below is captured occurrence of such an event: <Suspend> <Resume> <Reset>/<Chirp J>/<Tiny J> <Reset>/<Chirp K>/<Tiny K> <High Speed> <Corrupted packet> <Reset/Target disconnected> To fix the condition a user has to unplug and plug the device again. With USB_QUIRK_RESET_RESUME applied ("usbcore.quirks=1235:8211:b") for the Scarlett audio device the issue still reproduces. Applying USB_QUIRK_DISCONNECT_SUSPEND ("usbcore.quirks=1235:8211:m") fixed the issue and the Scarlett audio device didn't drop off the USB bus for ~5000 suspend/resume cycles where originally issue reproduced in ~100 or less suspend/resume cycles. Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230724112911.1802577-1-lb@semihalf.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-6.5-rc1' of ↵Linus Torvalds2023-07-035-23/+70
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1. Included in here are: - Lots of USB4/Thunderbolt additions and updates for new hardware types and fixes as people are starting to get access to the hardware in the wild - new gadget controller driver, cdns2, added - new typec drivers added - xhci driver updates - typec driver updates - usbip driver fixes - usb-serial driver updates and fixes - lots of smaller USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits) usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC usb: host: xhci: Do not re-initialize the XHCI HC if being removed usb: typec: nb7vpq904m: fix CONFIG_DRM dependency usbip: usbip_host: Replace strlcpy with strscpy usb: dwc3: gadget: Propagate core init errors to UDC during pullup USB: serial: option: add LARA-R6 01B PIDs usb: ulpi: Make container_of() no-op in to_ulpi_dev() usb: gadget: legacy: fix error return code in gfs_bind usb: typec: fsa4480: add support for Audio Accessory Mode usb: typec: fsa4480: rework mux & switch setup to handle more states usb: typec: ucsi: call typec_set_mode on non-altmode partner change USB: gadget: f_hid: make hidg_class a static const structure USB: gadget: f_printer: make usb_gadget_class a static const structure USB: mon: make mon_bin_class a static const structure USB: gadget: udc: core: make udc_class a static const structure USB: roles: make role_class a static const structure dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt dt-bindings: usb: Add StarFive JH7110 USB controller dt-bindings: usb: dwc3: Add IPQ9574 compatible usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup" ...
| * usb: update the ctime as well when updating mtime after an ioctlJeff Layton2023-06-131-8/+8
| | | | | | | | | | | | | | | | | | In general, POSIX requires that when the mtime is updated that the ctime be updated as well. Add the missing timestamp updates to the usb ioctls. Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-ID: <20230612104524.17058-3-jlayton@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: core: add sysfs entry for usb device stateRoy Luo2023-06-133-4/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose usb device state to userland as the information is useful in detecting non-compliant setups and diagnosing enumeration failures. For example: - End-to-end signal integrity issues: the device would fail port reset repeatedly and thus be stuck in POWERED state. - Charge-only cables (missing D+/D- lines): the device would never enter POWERED state as the HC would not see any pullup. What's the status quo? We do have error logs such as "Cannot enable. Maybe the USB cable is bad?" to flag potential setup issues, but there's no good way to expose them to userspace. Why add a sysfs entry in struct usb_port instead of struct usb_device? The struct usb_device is not device_add() to the system until it's in ADDRESS state hence we would miss the first two states. The struct usb_port is a better place to keep the information because its life cycle is longer than the struct usb_device that is attached to the port. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202306042228.e532af6e-oliver.sang@intel.com Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Roy Luo <royluo@google.com> Message-ID: <20230608015913.1679984-1-royluo@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge 6.4-rc5 into usb-nextGreg Kroah-Hartman2023-06-052-6/+55
| |\ | | | | | | | | | | | | | | | We need the USB fixes in here are well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: hide unused usbfs_notify_suspend/resume functionsArnd Bergmann2023-05-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The declaration is in an #ifdef, which causes warnings when building with 'make W=1' and without CONFIG_PM: drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend' drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume' Use the same #ifdef check around the function definitions to avoid the warnings and slightly shrink the USB core. Fixes: 7794f486ed0b ("usbfs: Add ioctls for runtime power management") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | USB: Extend pci resume function to handle PM eventsBasavaraj Natikar2023-05-131-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the pci_resume method has only a flag indicating whether the system is resuming from hibernation. In order to handle all PM events like AUTO_RESUME (runtime resume from device in D3), RESUME (system resume from s2idle, S3 or S4 states) etc change the pci_resume method to handle all PM events. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230428140056.1318981-2-Basavaraj.Natikar@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'mm-stable-2023-06-24-19-15' of ↵Linus Torvalds2023-06-281-4/+4
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ...
| * | drivers/usb: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGNCatalin Marinas2023-06-191-4/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-8-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Mike Snitzer <snitzer@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | usb: usbfs: Use consistent mmap functionsRuihan Li2023-05-291-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When hcd->localmem_pool is non-null, localmem_pool is used to allocate DMA memory. In this case, the dma address will be properly returned (in dma_handle), and dma_mmap_coherent should be used to map this memory into the user space. However, the current implementation uses pfn_remap_range, which is supposed to map normal pages. Instead of repeating the logic in the memory allocation function, this patch introduces a more robust solution. Here, the type of allocated memory is checked by testing whether dma_handle is properly set. If dma_handle is properly returned, it means some DMA pages are allocated and dma_mmap_coherent should be used to map them. Otherwise, normal pages are allocated and pfn_remap_range should be called. This ensures that the correct mmap functions are used consistently, independently with logic details that determine which type of memory gets allocated. Fixes: a0e710a7def4 ("USB: usbfs: fix mmap dma mismatch") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: usbfs: Enforce page requirements for mmapRuihan Li2023-05-292-4/+46
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds2023-04-273-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
| * USB: mark all struct bus_type as constGreg Kroah-Hartman2023-03-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the driver core can properly handle constant struct bus_type, move all of the USB subsystem struct bus_type structures as const, placing them into read-only memory which can not be modified at runtime. Cc: Johan Hovold <johan@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230313182918.1312597-36-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * driver core: class: remove module * from class_create()Greg Kroah-Hartman2023-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'usb-6.4-rc1' of ↵Linus Torvalds2023-04-272-8/+80
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.4-rc1. The "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems" * tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits) usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API usb: dwc3: gadget: Execute gadget stop after halting the controller media: radio-shark: Add endpoint checks USB: sisusbvga: Add endpoint checks USB: core: Add routines for endpoint checks in old drivers usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk usb: dwc3: core: add support for disabling High-speed park mode dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs usb: mtu3: add optional clock xhci_ck and frmcnt_ck dt-bindings: usb: mtu3: add two optional clocks usb: mtu3: expose role-switch control to userspace usb: mtu3: unlock @mtu->lock just before giving back request usb: mtu3: fix kernel panic at qmu transfer done irq handler usb: mtu3: use boolean return value usb: mtu3: give back request when rx error happens usb: chipidea: fix missing goto in `ci_hdrc_probe` usb: gadget: udc: core: Prevent redundant calls to pullup usb: gadget: udc: core: Invoke usb_gadget_connect only when started usb: typec: ucsi: don't print PPM init deferred errors ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-25 05:33:03 +0000