summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
Commit message (Collapse)AuthorAgeFilesLines
* usb: gadget: u_ether: fix unsafe list iterationMarek Szyprowski2018-11-281-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | list_for_each_entry_safe() is not safe for deleting entries from the list if the spin lock, which protects it, is released and reacquired during the list iteration. Fix this issue by replacing this construction with a simple check if list is empty and removing the first entry in each iteration. This is almost equivalent to a revert of the commit mentioned in the Fixes: tag. This patch fixes following issue: --->8--- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events eth_work PC is at rx_fill+0x60/0xac LR is at _raw_spin_lock_irqsave+0x50/0x5c pc : [<c065fee0>] lr : [<c0a056b8>] psr: 80000093 sp : ee7fbee8 ip : 00000100 fp : 00000000 r10: 006000c0 r9 : c10b0ab0 r8 : ee7eb5c0 r7 : ee7eb614 r6 : ee7eb5ec r5 : 000000dc r4 : ee12ac00 r3 : ee12ac24 r2 : 00000200 r1 : 60000013 r0 : ee7eb5ec Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6d5dc04a DAC: 00000051 Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval)) Stack: (0xee7fbee8 to 0xee7fc000) ... [<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738) [<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8) [<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164) [<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xee7fbfb0 to 0xee7fbff8) ... ---[ end trace 64480bc835eba7d6 ]--- Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* USB: omap_udc: fix rejection of out transfers when DMA is usedAaro Koskinen2018-11-261-0/+1
| | | | | | | | | | | Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") started aligning transfer size only if requested, breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore the old behaviour. Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* USB: omap_udc: fix USB gadget functionality on Palm Tungsten EAaro Koskinen2018-11-261-0/+1
| | | | | | | | On Palm TE nothing happens when you try to use gadget drivers and plug the USB cable. Fix by adding the board to the vbus sense quirk list. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* USB: omap_udc: fix omap_udc_start() on 15xx machinesAaro Koskinen2018-11-261-1/+2
| | | | | | | | On OMAP 15xx machines there are no transceivers, and omap_udc_start() always fails as it forgot to adjust the default return value. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* USB: omap_udc: fix crashes on probe error and module removalAaro Koskinen2018-11-261-31/+19
| | | | | | | | | | | | | | | | | | | We currently crash if usb_add_gadget_udc_release() fails, since the udc->done is not initialized until in the remove function. Furthermore, on module removal the udc data is accessed although the release function is already triggered by usb_del_gadget_udc() early in the function. Fix by rewriting the release and remove functions, basically moving all the cleanup into the release function, and doing the completion only in the module removal case. The patch fixes omap_udc module probe with a failing gadged, and also allows the removal of omap_udc. Tested by running "modprobe omap_udc; modprobe -r omap_udc" in a loop. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* USB: omap_udc: use devm_request_irq()Aaro Koskinen2018-11-261-27/+10
| | | | | | | | | | The current code fails to release the third irq on the error path (observed by reading the code), and we get also multiple WARNs with failing gadget drivers due to duplicate IRQ releases. Fix by using devm_request_irq(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO ↵Shen Jing2018-11-141-18/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | transfers" This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8 since it causes list corruption followed by kernel panic: Workqueue: adb ffs_aio_cancel_worker RIP: 0010:__list_add_valid+0x4d/0x70 Call Trace: insert_work+0x47/0xb0 __queue_work+0xf6/0x400 queue_work_on+0x65/0x70 dwc3_gadget_giveback+0x44/0x50 [dwc3] dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3] ? finish_wait+0x80/0x80 usb_ep_dequeue+0x1e/0x90 process_one_work+0x18c/0x3b0 worker_thread+0x3c/0x390 ? process_one_work+0x3b0/0x3b0 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This issue is seen with warm reboot stability testing. Signed-off-by: Shen Jing <jingx.shen@intel.com> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge tag 'media/v4.20-2' of ↵Linus Torvalds2018-10-311-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull new experimental media request API from Mauro Carvalho Chehab: "A new media request API This API is needed to support device drivers that can dynamically change their parameters for each new frame. The latest versions of Google camera and codec HAL depends on such feature. At this stage, it supports only stateless codecs. It has been discussed for a long time (at least over the last 3-4 years), and we finally reached to something that seem to work. This series contain both the API and core changes required to support it and a new m2m decoder driver (cedrus). As the current API is still experimental, the only real driver using it (cedrus) was added at staging[1]. We intend to keep it there for a while, in order to test the API. Only when we're sure that this API works for other cases (like encoders), we'll move this driver out of staging and set the API into a stone. [1] We added support for the vivid virtual driver (used only for testing) to it too, as it makes easier to test the API for the ones that don't have the cedrus hardware" * tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits) media: dt-bindings: Document the Rockchip VPU bindings media: platform: Add Cedrus VPU decoder driver media: dt-bindings: media: Document bindings for the Cedrus VPU driver media: v4l: Add definition for the Sunxi tiled NV12 format media: v4l: Add definitions for MPEG-2 slice format and metadata media: videobuf2-core: Rework and rename helper for request buffer count media: v4l2-ctrls.c: initialize an error return code with zero media: v4l2-compat-ioctl32.c: add missing documentation for a field media: media-request: update documentation media: media-request: EPERM -> EACCES/EBUSY media: v4l2-ctrls: improve media_request_(un)lock_for_update media: v4l2-ctrls: use media_request_(un)lock_for_access media: media-request: add media_request_(un)lock_for_access media: vb2: set reqbufs/create_bufs capabilities media: videodev2.h: add new capabilities for buffer types media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF media: v4l2-ctrls: return -EACCES if request wasn't completed media: media-request: return -EINVAL for invalid request_fds media: vivid: add request support media: vivid: add mc ...
| * media: videobuf2-v4l2: integrate with media requestsHans Verkuil2018-08-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | This implements the V4L2 part of the request support. The main change is that vb2_qbuf and vb2_prepare_buf now have a new media_device pointer. This required changes to several drivers that did not use the vb2_ioctl_qbuf/prepare_buf helper functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | Merge tag 'usb-4.20-rc1' of ↵Linus Torvalds2018-10-2617-624/+968
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
| * | USB: net2280: Remove ->disconnect() callback from net2280_pullup()Alan Stern2018-10-051-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The net2280 UDC driver invokes the gadget driver's ->disconnect() callback routine when the net2280_pullup() routine turns off the D+ pullup. This is now unnecessary, because the gadget core performs the callback on our behalf. This patch removes the unneeded callback. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: udc: renesas_usb3: add support for r8a77990Yoshihiro Shimoda2018-10-051-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since r8a77990 (R-Car E3) doesn't have VBUS detect pin and number of ramif is 4, this patch adds a new renesas_usb3_priv variable for the SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: udc: renesas_usb3: Fix b-device mode for "workaround"Yoshihiro Shimoda2018-10-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the "workaround_for_vbus" is true, the driver will not call usb_disconnect(). So, since the controller keeps some registers' value, the driver doesn't re-enumarate suitable speed after the b-device mode is disabled. To fix the issue, this patch adds usb_disconnect() calling in renesas_usb3_b_device_write() if workaround_for_vbus is true. Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode") Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: f_uac2: disable IN/OUT ep if unusedAndreas Pape2018-10-021-44/+172
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Via p_chmask/c_chmask the user can define whether uac2 shall support playback and/or capture. This has only effect on the created ALSA device, but not on the USB descriptor. This patch adds playback/capture descriptors dependent on that parameter. Signed-off-by: Andreas Pape <apape@de.adit-jv.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | USB: gadget core: Issue ->disconnect() callback from usb_gadget_disconnect()Alan Stern2018-10-021-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gadget documentation doesn't state clearly whether a gadget driver's ->disconnect() callback should be invoked when the D+ pullup is turned off. Some UDC drivers do this and some don't. This patch settles the issue by making the core function usb_gadget_disconnect() issue the callback, so that UDC drivers don't need to worry about it. A description of the new behavior is added to the function's kerneldoc. Also, the patch removes a few superseded callbacks from other core routines. Future patches will remove the ->disconnect() calls from the UDC drivers that make them, as they are now unnecessary. Until all those patches are merged gadget drivers may receive extra ->disconnect() callbacks, but this should be harmless. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: atmel: remove pointless retrieval of DT name propertyRob Herring2018-10-021-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name is always non-NULL and then is not used anywhere in this function, so remove it. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-usb@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: fsl_udc_core: fixup struct_udc_setup documentationNicholas Mc Guire2018-10-021-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original implementation from commit b504882da539 ("USB: add Freescale high-speed USB SOC device controller driver") returned NULL on failure and an allocated + initialized struct fsl_udc on success. The current code introduced in commit 4365831dadfe ("USB: fsl_usb2_udc: Get max ep number from DCCPARAMS register") only provides partial initialization as well as returning 0 on success and -1 on failures. The function documentation is updated accordingly. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 4365831dadfe ("USB: fsl_usb2_udc: Get max ep number from DCCPARAMS register") Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: fsl_udc_core: check allocation return value and cleanup on failureNicholas Mc Guire2018-10-021-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The allocation with fsl_alloc_request() and kmalloc() were unchecked fixed this up with a NULL check and appropriate cleanup. Additionally udc->ep_qh_size was reset to 0 on failure of allocation. Similar udc->phy_mode is initially 0 (as udc_controller was allocated with kzalloc in fsl_udc_probe()) so reset it to 0 as well so that this function is side-effect free on failure. Not clear if this is necessary or sensible as fsl_udc_release() probably can not be called if fsl_udc_probe() failed - but it should not hurt. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: b504882da5 ("USB: add Freescale high-speed USB SOC device controller driver") Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: udc: atmel: handle at91sam9rl PMCAlexandre Belloni2018-10-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has its own compatible string. Add support for that. Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible") Acked-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in ↵Jia-Ju Bai2018-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fotg210_get_status() The driver may sleep in an interrupt handler. The function call path (from bottom to top) in Linux-4.17 is: [FUNC] fotg210_ep_queue(GFP_KERNEL) drivers/usb/gadget/udc/fotg210-udc.c, 744: fotg210_ep_queue in fotg210_get_status drivers/usb/gadget/udc/fotg210-udc.c, 768: fotg210_get_status in fotg210_setup_packet drivers/usb/gadget/udc/fotg210-udc.c, 949: fotg210_setup_packet in fotg210_irq (interrupt handler) To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. If possible, spin_unlock() and spin_lock() around fotg210_ep_queue() can be also removed. This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: udc: Remove unnecessary parenthesesNathan Chancellor2018-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/usb/gadget/udc/mv_udc_core.c:188:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~ drivers/usb/gadget/udc/mv_udc_core.c:188:33: note: remove extraneous parentheses around the comparison to silence this warning while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { ~ ^ ~ drivers/usb/gadget/udc/mv_udc_core.c:188:33: note: use '=' to turn this equality comparison into an assignment while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { ^~ = 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/120 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: fix spelling mistakeis "[En]queing" -> "[En]queuing"Colin Ian King2018-10-022-2/+2
| | | | | | | | | | | | | | | | | | | | | Trivial fix to spelling mistakes in debug warning messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | Merge tag 'uvcg-20180925' of git://linuxtv.org/pinchartl/media into testing/nextFelipe Balbi2018-10-027-558/+740
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | UVC gadget updates for v4.20 - configfs cleanups, fixes and extensions - Endianness fixes - Miscellaneous cleanups
| | * | usb: gadget: uvc: configfs: Use %u to print unsigned int valuesLaurent Pinchart2018-09-251-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver uses the %d format to print unsigned int values. The correct format is %u. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Simplify attributes macrosLaurent Pinchart2018-09-251-110/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several macros used to define attributes and their access functions take multiple arguments to specify endianness and string conversion functions, based on the size of the attribute. This can be simplified by passing the number of bits explicitly, and constructing the name of the functions internally. The UVCG_OPTS_ATTR macro can be simplified further as all fields it deals with are unsigned int. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Fix operation on big endian platformsLaurent Pinchart2018-09-251-35/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB descriptors are stored in little endian, requiring the use of conversion macros. Those macros are incorrectly used for values stored in native endian structures within the driver. Operation on big endian platforms is thus broken. Fix it by removing the conversion macros where they're not needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
| | * | usb: gadget: uvc: Remove uvc_set_trace_param() functionLaurent Pinchart2018-09-251-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The function is never called, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: Replace plain printk() with dev_*()Laurent Pinchart2018-09-255-42/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding device context to the kernel log messages make them more useful. Add new uvcg_* macros based on dev_*() that print both the gadget device name and the function name. While at it, remove a commented out printk statement and an unused printk-based macro. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: Only halt video streaming endpoint in bulk modeLaurent Pinchart2018-09-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When USB requests for video data fail to be submitted, the driver signals a problem to the host by halting the video streaming endpoint. This is only valid in bulk mode, as isochronous transfers have no handshake phase and can't thus report a stall. The usb_ep_set_halt() call returns an error when using isochronous endpoints, which we happily ignore, but some UDCs complain in the kernel log. Fix this by only trying to halt the endpoint in bulk mode. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: Factor out video USB request queueingLaurent Pinchart2018-09-251-10/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB requests for video data are queued from two different locations in the driver, with the same code block occurring twice. Factor it out to a function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Sort frame intervals upon writingPaul Elder2018-09-241-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an issue where the host is unable to tell the gadget what frame rate it wants if the dwFrameIntervals in the interface descriptors are not in ascending order. This means that when instantiating a uvc gadget via configfs the user must make sure the dwFrameIntervals are in ascending order. Instead of silently failing the breaking of this rule, we sort the dwFrameIntervals upon writing to configfs. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Prevent format changes after linking headerJoel Pepper2018-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While checks are in place to avoid attributes and children of a format being manipulated after the format is linked into the streaming header, the linked flag was never actually set, invalidating the protections. Update the flag as appropriate in the header link calls. Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Add bFrameIndex attributesJoel Pepper2018-09-241-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add bFrameIndex as a UVCG_FRAME_ATTR_RO for each frame size. - Automatically assign ascending bFrameIndex to each frame in a format. Before all "bFrameindex" attributes were set to "1" with no way to configure the gadget otherwise. This resulted in the host always negotiating for bFrameIndex 1 (i.e. the first frame size of the gadget). After the negotiation the host driver will set the user or application selected frame size, while the gadget is actually set to the first frame size. Now, when the containing format is linked into the streaming header, iterate over all child frame descriptors and assign ascending indices. The automatically assigned indices can be read from the new read only bFrameIndex configfs attribute in each frame descriptor item. Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de> [Simplified documentation, renamed function, blank space update] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Add bFormatIndex attributesLaurent Pinchart2018-09-241-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UVC format description are numbered using the descriptor's bFormatIndex field. The index is used in UVC requests, and is thus needed to handle requests in userspace. Make it dynamically discoverable by exposing it in a bFormatIndex configfs attribute of the uncompressed and mjpeg format config items. The bFormatIndex value exposed through the attribute is stored in the config item private data. However, that value is never set: the driver instead computes the bFormatIndex value when linking the stream class header in the configfs hierarchy and stores it directly in the class descriptors in a separate structure. In order to expose the value through the configfs attribute, store it in the config item private data as well. This results in a small code simplification. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Add interface number attributesLaurent Pinchart2018-09-243-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The video control and video streaming interface numbers are needed in the UVC gadget userspace stack to reply to UVC requests. They are hardcoded to fixed values at the moment, preventing configurations with multiple functions. To fix this, make them dynamically discoverable by userspace through read-only configfs attributes in <function>/control/bInterfaceNumber and <function>/streaming/bInterfaceNumber respectively. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Allocate groups dynamicallyLaurent Pinchart2018-09-242-251/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UVC configfs implementation creates all groups as global static variables. This prevents creation of multiple UVC function instances, as they would all require their own configfs group instances. Fix this by allocating all groups dynamically. To avoid duplicating code around, extend the config_item_type structure with group name and children, and implement helper functions to create children automatically for most groups. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Drop leaked references to config itemsLaurent Pinchart2018-09-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the .allow_link() and .drop_link() operations implementations call config_group_find_item() and then leak the reference to the returned item. Fix this by dropping those references where needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Add section header commentsLaurent Pinchart2018-09-181-29/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UVC configfs implementation is large and difficult to navigate. Add a bit more air to the code to make it easier to read. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
| | * | usb: gadget: uvc: configfs: Don't wrap groups unnecessarilyLaurent Pinchart2018-09-181-185/+117
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various configfs groups (represented by config_group) are wrapped in structures that they're the only member of. This allows adding other data fields to groups, but it unnecessarily makes the code more complex. Remove the outer structures and use config_group directly to simplify the code. Groups can still be wrapped individually in the future if other data fields need to be added. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
* | | Merge branch 'siginfo-linus' of ↵Linus Torvalds2018-10-241-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
| * | | signal: Don't send siginfo to kthreads.Eric W. Biederman2018-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Today kernel threads never dequeue siginfo so it is pointless to enqueue siginfo for them. The usb gadget mass storage driver goes one farther and uses SEND_SIG_FORCED to guarantee that no siginfo is even enqueued. Generalize the optimization of the usb mass storage driver and never perform an unnecessary allocation when delivering signals to kthreads. Switch the mass storage driver from sending signals with SEND_SIG_FORCED to SEND_SIG_PRIV. As using SEND_SIG_FORCED is now unnecessary. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
| * | | signal: Remove the siginfo paramater from kernel_dqueue_signalEric W. Biederman2018-09-111-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | None of the callers use the it so remove it. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* | | usb: gadget: storage: Fix Spectre v1 vulnerabilityGustavo A. R. Silva2018-10-171-0/+3
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | num can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn: potential spectre issue 'fsg_opts->common->luns' [r] (local cap) Fix this by sanitizing num before using it to index fsg_opts->common->luns Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Felipe Balbi <felipe.balbi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: gadget: udc: renesas_usb3: fix maxpacket size of ep0Yoshihiro Shimoda2018-08-291-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue that maxpacket size of ep0 is incorrect for SuperSpeed. Otherwise, CDC NCM class with SuperSpeed doesn't work correctly on this driver because its control read data size is more than 64 bytes. Reported-by: Junki Kato <junki.kato.xk@renesas.com> Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Junki Kato <junki.kato.xk@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | usb: gadget: fotg210-udc: Fix memory leak of fotg210->ep[i]Anton Vasilyev2018-08-291-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | There is no deallocation of fotg210->ep[i] elements, allocated at fotg210_udc_probe. The patch adds deallocation of fotg210->ep array elements and simplifies error path of fotg210_udc_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | USB: net2280: Fix erroneous synchronization changeAlan Stern2018-08-291-2/+14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks") was based on a serious misunderstanding. It introduced regressions into both the dummy-hcd and net2280 drivers. The problem in dummy-hcd was fixed by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), but the problem in net2280 remains. Namely: the ->disconnect(), ->suspend(), ->resume(), and ->reset() callbacks must be invoked without the private lock held; otherwise a deadlock will occur when the callback routine tries to interact with the UDC driver. This patch largely is a reversion of the relevant parts of f16443a034c7. It also drops the private lock around the calls to ->suspend() and ->resume() (something the earlier patch forgot to do). This is safe from races with device interrupts because it occurs within the interrupt handler. Finally, the patch changes where the ->disconnect() callback is invoked when net2280_pullup() turns the pullup off. Rather than making the callback from within stop_activity() at a time when dropping the private lock could be unsafe, the callback is moved to a point after the lock has already been dropped. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks") Reported-by: D. Ziesche <dziesche@zes.com> Tested-by: D. Ziesche <dziesche@zes.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds2018-08-181-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
| * Merge 4.18-rc5 into char-misc-nextGreg Kroah-Hartman2018-07-163-8/+22
| |\ | | | | | | | | | | | | | | | We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap2018-07-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'usb-4.19-rc1' of ↵Linus Torvalds2018-08-1816-102/+170
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB and phy driver patch set for 4.19-rc1. Nothing huge but there was a lot of work that happened this development cycle: - lots of type-c work, with drivers graduating out of staging, and displayport support being added. - new PHY drivers - the normal collection of gadget driver updates and fixes - code churn to work on the urb handling path, using irqsave() everywhere in anticipation of making this codepath a lot simpler in the future. - usbserial driver fixes and reworks - other misc changes All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: serial: pl2303: add a new device id for ATEN usb: renesas_usbhs: Kconfig: convert to SPDX identifiers usb: dwc3: gadget: Check MaxPacketSize from descriptor usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms usb: dwc2: Turn on uframe_sched on "amlogic" platforms usb: dwc2: Turn on uframe_sched on "his" platforms usb: dwc2: Turn on uframe_sched on "bcm" platforms usb: dwc2: gadget: ISOC's starting flow improvement usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic. usb: dwc3: core: Enable AutoRetry feature in the controller usb: dwc3: Set default mode for dwc_usb31 usb: gadget: udc: renesas_usb3: Add register of usb role switch usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep usb: dwc2: Modify dwc2_readl/writel functions prototype usb: dwc3: pci: Intel Merrifield can be host usb: dwc3: pci: Supply device properties via driver data arm64: dts: dwc3: description of incr burst type usb: dwc3: Enable undefined length INCR burst type usb: dwc3: add global soc bus configuration reg0 usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci ...
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-02 17:04:59 +0000