summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
Commit message (Collapse)AuthorAgeFilesLines
...
* USB: gadget: f_hid: fix deadlock in f_hidg_write()Radoslav Gerganov2019-03-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | In f_hidg_write() the write_spinlock is acquired before calling usb_ep_queue() which causes a deadlock when dummy_hcd is being used. This is because dummy_queue() callbacks into f_hidg_req_complete() which tries to acquire the same spinlock. This is (part of) the backtrace when the deadlock occurs: 0xffffffffc06b1410 in f_hidg_req_complete 0xffffffffc06a590a in usb_gadget_giveback_request 0xffffffffc06cfff2 in dummy_queue 0xffffffffc06a4b96 in usb_ep_queue 0xffffffffc06b1eb6 in f_hidg_write 0xffffffff8127730b in __vfs_write 0xffffffff812774d1 in vfs_write 0xffffffff81277725 in SYSC_write Fix this by releasing the write_spinlock before calling usb_ep_queue() Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org # 4.11+ Fixes: 749494b6bdbb ("usb: gadget: f_hid: fix: Move IN request allocation to set_alt()") Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: net2272: Fix net2272_dequeue()Guido Kiener2019-03-201-0/+1
| | | | | | | | | | | | | | | | | Restore the status of ep->stopped in function net2272_dequeue(). When the given request is not found in the endpoint queue the function returns -EINVAL without restoring the state of ep->stopped. Thus the endpoint keeps blocked and does not transfer any data anymore. This fix is only compile-tested, since we do not have a corresponding hardware. An analogous fix was tested in the sibling driver. See "usb: gadget: net2280: Fix net2280_dequeue()" Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: net2280: Fix net2280_dequeue()Guido Kiener2019-03-201-2/+2
| | | | | | | | | | | | | | | When a request must be dequeued with net2280_dequeue() e.g. due to a device clear action and the same request is finished by the function scan_dma_completions() then the function net2280_dequeue() does not find the request in the following search loop and returns the error -EINVAL without restoring the status ep->stopped. Thus the endpoint keeps blocked and does not receive any data anymore. This fix restores the status and does not issue an error message. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: net2280: Fix overrun of OUT messagesGuido Kiener2019-03-201-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size. The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets. With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2019-03-091-9/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
| * scsi: target/core: Remove the write_pending_status() callback functionBart Van Assche2019-02-041-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the patch that makes TMF handling synchronous the write_pending_status() callback function is no longer called. Hence remove it. Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge tag 'pci-v5.1-changes' of ↵Linus Torvalds2019-03-091-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ...
| * | PCI: Move Rohm Vendor ID to generic listAndy Shevchenko2019-02-011-1/+0
| |/ | | | | | | | | | | | | | | | | Move the Rohm Vendor ID to pci_ids.h instead of defining it in several drivers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge tag 'usb-for-v5.1' of ↵Greg Kroah-Hartman2019-02-1532-107/+116
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.1 merge window Dwc3 now works on TI's AM6xx platforms. Also on dwc3 we have a few changes which improve request cancellation and some improvements to how we print to the trace buffer. Renesas_usb3 got support for r8a774c0 device. Dwc2 got scatter-gather support. Apart from these, the usual set of minor fixes and all sorts of small details. * tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (40 commits) usb: phy: twl6030-usb: fix possible use-after-free on remove usb: misc: usbtest: add super-speed isoc support usb: dwc3: Reset num_trbs after skipping usb: dwc3: gadget: don't enable interrupt when disabling endpoint fotg210-udc: pass struct device to DMA API functions fotg210-udc: remove a bogus dma_sync_single_for_device call usb: gadget: Change Andrzej Pietrasiewicz's e-mail address usb: f_fs: Avoid crash due to out-of-scope stack ptr access usb: dwc3: haps: Workaround matching VID PID usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss() usb: gadget: function: sync f_uac1 ac header baInterfaceNr usb: dwc2: gadget: Add scatter-gather mode usb: gadget: fix various indentation issues usb: dwc2: Fix EP TxFIFO number setting udc: net2280: Fix net2280_disable USB: gadget: Improve kerneldoc for usb_ep_dequeue() usb: dwc3: debug: purge usage of strcat usb: dwc3: trace: pass trace buffer size to decoding functions usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING ...
| * | fotg210-udc: pass struct device to DMA API functionsChristoph Hellwig2019-02-111-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | fotg210-udc: remove a bogus dma_sync_single_for_device callChristoph Hellwig2019-02-111-4/+0
| | | | | | | | | | | | | | | | | | | | | dma_map_single already transfers ownership to the device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: Change Andrzej Pietrasiewicz's e-mail addressAndrzej Pietrasiewicz2019-02-1119-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | My @samusung.com address is going to cease existing soon, so change it to an address which can actually be used to contact me. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: f_fs: Avoid crash due to out-of-scope stack ptr accessJohn Stultz2019-02-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the 5.0 merge window opened, I've been seeing frequent crashes on suspend and reboot with the trace: [ 36.911170] Unable to handle kernel paging request at virtual address ffffff801153d660 [ 36.912769] Unable to handle kernel paging request at virtual address ffffff800004b564 ... [ 36.950666] Call trace: [ 36.950670] queued_spin_lock_slowpath+0x1cc/0x2c8 [ 36.950681] _raw_spin_lock_irqsave+0x64/0x78 [ 36.950692] complete+0x28/0x70 [ 36.950703] ffs_epfile_io_complete+0x3c/0x50 [ 36.950713] usb_gadget_giveback_request+0x34/0x108 [ 36.950721] dwc3_gadget_giveback+0x50/0x68 [ 36.950723] dwc3_thread_interrupt+0x358/0x1488 [ 36.950731] irq_thread_fn+0x30/0x88 [ 36.950734] irq_thread+0x114/0x1b0 [ 36.950739] kthread+0x104/0x130 [ 36.950747] ret_from_fork+0x10/0x1c I isolated this down to in ffs_epfile_io(): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/gadget/function/f_fs.c#n1065 Where the completion done is setup on the stack: DECLARE_COMPLETION_ONSTACK(done); Then later we setup a request and queue it, and wait for it: if (unlikely(wait_for_completion_interruptible(&done))) { /* * To avoid race condition with ffs_epfile_io_complete, * dequeue the request first then check * status. usb_ep_dequeue API should guarantee no race * condition with req->complete callback. */ usb_ep_dequeue(ep->ep, req); interrupted = ep->status < 0; } The problem is, that we end up being interrupted, dequeue the request, and exit. But then the irq triggers and we try calling complete() on the context pointer which points to now random stack space, which results in the panic. Alan Stern pointed out there is a bug here, in that the snippet above "assumes that usb_ep_dequeue() waits until the request has been completed." And that: wait_for_completion(&done); Is needed right after the usb_ep_dequeue(). Thus this patch implements that change. With it I no longer see the crashes on suspend or reboot. This issue seems to have been uncovered by behavioral changes in the dwc3 driver in commit fec9095bdef4e ("usb: dwc3: gadget: remove wait_end_transfer"). Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Thinh Nguyen <thinh.nguyen@synopsys.com> Cc: Chen Yu <chenyu56@huawei.com> Cc: Jerry Zhang <zhangjerry@google.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Vincent Pelletier <plr.vincent@gmail.com> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linux USB List <linux-usb@vger.kernel.org> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() callAndrzej Pietrasiewicz2019-02-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | usb_ep_autoconfig() treats the passed descriptor as if it were an fs descriptor. In particular, for bulk endpoints, it clips wMaxPacketSize to 64. This patch preserves the original value. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss()Andrzej Pietrasiewicz2019-02-071-17/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | The moved code refers to non-super speed endpoints only. This patch also makes the comment stress the fact, that autoconfigured descriptor might need some adjustments. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: function: sync f_uac1 ac header baInterfaceNrliangshengjun2019-02-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f_uac1 audio control header descriptor default set baInterfaceNr[]={1,2}, but usb gadget make a configuration descriptor with more interfaces combination, it can not confirm f_uac1 function linked first. So always keep baInterfaceNr[]={1,2} is correct, and it is necessary to sync baInterfaceNr[] with usb_interface_id() value. Signed-off-by: Liang Shengjun <liangshengjun@hisilicon.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: fix various indentation issuesColin Ian King2019-02-075-28/+28
| | | | | | | | | | | | | | | | | | | | | There are a bunch of various indentation issues, clean these up. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | udc: net2280: Fix net2280_disableGuido Kiener2019-02-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A reset e.g. calling ep_reset_338x() can happen while endpoints are enabled. The ep_reset_338x() sets ep->desc = NULL to mark endpoint being invalid. A subsequent call of net2280_disable will fail and return -EINVAL to parent function usb_ep_disable(), which will fail, too, and do not set the member ep->enabled = false. See: https://elixir.bootlin.com/linux/v5.0-rc5/source/drivers/usb/gadget/udc/core.c#L139 This fix ignores dp->desc and allows net2280_disable() to succeed. Subsequent calls to usb_ep_enable()/usb_ep_disable() succeeds. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | USB: gadget: Improve kerneldoc for usb_ep_dequeue()Alan Stern2019-02-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bf594c1070f5 ("USB: gadget: Document that certain ep operations can be called in interrupt context") documented that usb_ep_dequeue() may be called in a non-process context. It follows that the routine must not sleep or wait for events. However, the routine's existing kerneldoc seems to imply that it will wait until the request being cancelled has fully completed. This is not so, and thus the comment needs to be improved. Misunderstanding this point may very well have been responsible for a bug recently uncovered in the f_fs function. The updated comment explicitly says that the routine may return before the request's completion handler is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: udc: renesas_usb3: add support for r8a774c0Fabrizio Castro2019-01-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RZ/G2E USB 3.0 implementation is like the one found on R-Car E3, therefore add the same quirk. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: uvc: add uvcg_warn macroPaul Elder2019-01-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | We only have uvcg_dbg, uvcg_info, and uvcg_err, so add uvcg_warn macro to print gadget device name and function name along with format. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: u_serial: process RX in workqueue instead of taskletMichał Mirosław2019-01-281-21/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch RX processing from tasklet to (delayed) work queue. This allows receiver more room to process incoming data and prevents flood of "ttyGS0: RX not scheduled?" messages on HS receive on slow CPU. A side effect is 2.4MB/s zmodem transfer speed (up from 1.8MB/s) on my test board. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: udc: reduce indentationJulia Lawall2019-01-281-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete tab aligning a statement with the right hand side of a preceding assignment rather than the left hand side. Found with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: aspeed: fix typoMatteo Croce2019-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | | Fix spelling mistake: "lenght" -> "length" Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: Remove dead branch codeYueHaibing2019-01-281-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | 'num' is a u8 variable, it never greater than 255, So the if branch is dead code and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | | Merge 5.0-rc6 into usb-nextGreg Kroah-Hartman2019-02-111-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: udc: net2272: Fix bitwise and boolean operationsGustavo A. R. Silva2019-01-281-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (!x & y) strikes again. Fix bitwise and boolean operations by enclosing the expression: intcsr & (1 << NET2272_PCI_IRQ) in parentheses, before applying the boolean operator '!'. Notice that this code has been there since 2011. So, it would be helpful if someone can double-check this. This issue was detected with the help of Coccinelle. Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | | Merge 5.0-rc4 into usb-nextGreg Kroah-Hartman2019-01-281-1/+1
|\| | | | | | | | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: Potential NULL dereference on allocation errorDan Carpenter2019-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The source_sink_alloc_func() function is supposed to return error pointers on error. The function is called from usb_get_function() which doesn't check for NULL returns so it would result in an Oops. Of course, in the current kernel, small allocations always succeed so this doesn't affect runtime. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | | USB: add missing SPDX lines to Kconfig and MakefilesGreg Kroah-Hartman2019-01-224-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge 5.0-rc2 into usb-nextGreg Kroah-Hartman2019-01-151-7/+6
|\| | | | | | | | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain2019-01-081-7/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
* / usb: gadget: udc: reduce indentationJulia Lawall2019-01-071-9/+8
|/ | | | | | | | | | Delete tab aligning a statement with the right hand side of a preceding assignment rather than the left hand side. Found with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Remove 'type' argument from access_ok() functionLinus Torvalds2019-01-032-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'usb-4.21-rc1' of ↵Linus Torvalds2018-12-286-37/+123
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.21-rc1. All of the usual bits are in here: - loads of USB gadget driver updates and additions - new device ids - phy driver updates - xhci reworks and new features - typec updates Full details are in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits) USB: serial: option: add Fibocom NL678 series cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader. usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() usb: typec: tcpm: Extend the matching rules on PPS APDO selection usb: typec: Improve Alt Mode documentation usb: musb: dsps: fix runtime pm for peripheral mode usb: musb: dsps: fix otg state machine USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays usb: renesas_usbhs: add support for RZ/G2E usb: ehci-omap: Fix deferred probe for phy handling usb: roles: Add a description for the class to Kconfig usb: renesas_usbhs: mark PM functions as __maybe_unused usb: core: Remove unnecessary memset() usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers ...
| * Merge tag 'usb-for-v4.21' of ↵Greg Kroah-Hartman2018-12-125-36/+122
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB changes for v4.21 So it looks like folks are interested in dwc3 again. Almost 64% of the changes are in dwc3 this time around with some other bits in gadget functions and dwc2. There are two important parts here: a. removal of the waitqueue from dwc3's dequeue implementation, which will guarantee that gadget functions can dequeue from any context and; b. better method for starting isochronous transfers to avoid, as much as possible, missed isoc frames. Apart from these, we have the usual set of non-critical fixes and new features all over the place. * tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (56 commits) usb: dwc2: Fix disable all EP's on disconnect usb: dwc3: gadget: Disable CSP for stream OUT ep usb: dwc2: disable power_down on Amlogic devices Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs" USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler usb: dwc3: trace: add missing break statement to make compiler happy usb: dwc3: gadget: Report isoc transfer frame number usb: gadget: Introduce frame_number to usb_request usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro usb: renesas_usbhs: Remove dummy runtime PM callbacks usb: dwc2: host: use hrtimer for NAK retries usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode usb: mtu3: enable SETUPENDISR interrupt usb: mtu3: fix the issue about SetFeature(U1/U2_Enable) usb: mtu3: enable hardware remote wakeup from L1 automatically usb: mtu3: remove QMU checksum usb/mtu3: power down device ip at setup usb: dwc2: Disable power down feature on Samsung SoCs usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb() ...
| | * USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li2018-12-071-15/+2
| | | | | | | | | | | | | | | | | | | | | Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * usb: gadget: f_fs: Allow scatter-gather buffersAndrzej Pietrasiewicz2018-11-261-7/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some protocols implemented in userspace with FunctionFS might require large buffers, e.g. 64kB or more. Currently the said memory is allocated with kmalloc, which might fail should system memory be highly fragmented. On the other hand, some UDC hardware allows scatter-gather operation and this patch takes advantage of this capability: if the requested buffer is larger than PAGE_SIZE and the UDC allows scatter-gather operation, then the buffer is allocated with vmalloc and a scatterlist describing it is created and passed to usb request. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * usb: gadget: f_fs: Add support for CCID descriptors.Vincent Pelletier2018-11-261-7/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nothing to remap, only check length. Define a minimal structure for CCID descriptor only used to check length. As this descriptor shares the same value as HID descriptors, keep track and compare current interface's class to expected HID and CCID standard values. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * usb: gadget: udc: fix spelling mistake "intrerrupt" -> "interrupt"Colin Ian King2018-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | Trivial fix to spelling mistake in comment Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * usb: gadget: uvc: constify vb2_ops structureJulia Lawall2018-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vb2_ops structure can be const as it is only stored in the ops field of a vb2_queue structure and this field is const. Done with the help of Coccinelle. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_deviceYoshihiro Shimoda2018-11-261-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a safety connection way for "forced_b_device" with "workaround_for_vbus" like below: < Example for R-Car E3 Ebisu > # modprobe <any usb gadget driver> # echo 1 > /sys/kernel/debug/ee020000.usb/b_device (connect a usb cable to host side.) # echo 2 > /sys/kernel/debug/ee020000.usb/b_device Previous code should have connected a usb cable before the "b_device" is set to 1 on the Ebisu board. However, if xHCI driver on the board is probed, it causes some troubles: - Conflicts USB VBUS/signals between the board and another host. - "Cannot enable. Maybe the USB cable is bad?" might happen on both the board and another host with a usb hub. - Cannot enumerate a usb gadget correctly because an interruption of VBUS change happens unexpectedly. Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * usb: gadget: aspeed-vhub: constify usb_gadget_ops structureJulia Lawall2018-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb_gadget_ops structure can be const as it is only stored in the ops field of a usb_gadget structure and this field is const. Done with the help of Coccinelle. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | Merge 4.20-rc5 into usb-nextGreg Kroah-Hartman2018-12-032-62/+37
| |\ \ | | | | | | | | | | | | | | | | | | | | We need the USB fixes into usb-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * \ \ Merge 4.20-rc4 into usb-nextGreg Kroah-Hartman2018-11-261-18/+8
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | USB: gadget: udc: fix spelling mistake "intrerrupt" -> "interrupt"Colin Ian King2018-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial fix to spelling mistake in comment Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2018-12-281-7/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
| * | | | scsi: target: replace fabric_ops.name with fabric_aliasDavid Disseldorp2018-11-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iscsi_target_mod is the only LIO fabric where fabric_ops.name differs from the fabric_ops.fabric_name string. fabric_ops.name is used when matching target/$fabric ConfigFS create paths, so rename it .fabric_alias and fallback to target/$fabric vs .fabric_name comparison if .fabric_alias isn't initialised. iscsi_target_mod is the only fabric module to set .fabric_alias . All other fabric modules rely on .fabric_name matching and can drop the duplicate string. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | scsi: target: drop unnecessary get_fabric_name() accessor from fabric_opsDavid Disseldorp2018-11-281-6/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All fabrics return a const string. In all cases *except* iSCSI the get_fabric_name() string matches fabric_ops.name. Both fabric_ops.get_fabric_name() and fabric_ops.name are user-facing, with the former being used for PR/ALUA state and the latter for ConfigFS (config/target/$name), so we unfortunately need to keep both strings around for now. Replace the useless .get_fabric_name() accessor function with a const string fabric_name member variable. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | / net: dev: Add extack argument to dev_set_mac_address()Petr Machata2018-12-131-1/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A follow-up patch will add a notifier type NETDEV_PRE_CHANGEADDR, which allows vetoing of MAC address changes. One prominent path to that notification is through dev_set_mac_address(). Therefore give this function an extack argument, so that it can be packed together with the notification. Thus a textual reason for rejection (or a warning) can be communicated back to the user. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 02:47:46 +0000