summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAgeFilesLines
* usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero valuePeter Griffin2016-04-131-1/+1
| | | | | | | | | | | | | | | | | | | | | Otherwise generic-xhci and xhci-platform which have no data get wrongly detected as XHCI_PLAT_TYPE_MARVELL_ARMADA by xhci_plat_type_is(). This fixes a regression in v4.5 for STiH407 family SoC's which use the synopsis dwc3 IP, whereby the disable_clk error path gets taken due to wrongly being detected as XHCI_PLAT_TYPE_MARVELL_ARMADA and the hcd never gets added. I suspect this will also fix other dwc3 DT platforms such as Exynos, although I've only tested on STih410 SoC. Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv") Cc: stable@vger.kernel.org Cc: gregory.clement@free-electrons.com Cc: yoshihiro.shimoda.uh@renesas.com Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllersMathias Nyman2016-04-134-4/+9
| | | | | | | | | | | | | | | | | | | PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected. Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints. For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset. For now the flag is only set for PCI connected host controllers. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: fix wild pointers in xhci_mem_cleanupLu Baolu2016-04-131-0/+6
| | | | | | | | | | | | This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB physYoshihiro Shimoda2016-04-131-0/+13
| | | | | | | | | | | This patch fixes an issue that cannot work if R-Car Gen2/3 run on above 4GB physical memory environment to use a quirk XHCI_NO_64BIT_SUPPORT. Cc: <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORTYoshihiro Shimoda2016-04-132-0/+11
| | | | | | | | | | | | | | | | | | On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit address memory pointers actually. So, in this case, this driver should call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller will be died after a usb device is connected if it runs on above 4GB physical memory environment. So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve such an issue. Cc: <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: resume USB 3 roothub firstMathias Nyman2016-04-131-3/+3
| | | | | | | | | | | | Give USB3 devices a better chance to enumerate at USB 3 speeds if they are connected to a suspended host. Solves an issue with NEC uPD720200 host hanging when partially enumerating a USB3 device as USB2 after host controller runtime resume. Cc: <stable@vger.kernel.org> Tested-by: Mike Murdoch <main.haarp@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 hostRafal Redzimski2016-04-131-1/+3
| | | | | | | | | | | Broxton B0 also requires XHCI_PME_STUCK_QUIRK. Adding PCI device ID for Broxton B and adding to quirk. Cc: <stable@vger.kernel.org> Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds2016-03-171-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
| * gpio: Include linux/gpio.h instead of asm/gpio.hBjorn Helgaas2016-02-161-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most arches have an asm/gpio.h that merely includes linux/gpio.h. The others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected, linux/gpio.h includes asm/gpio.h. Therefore, code should include linux/gpio.h instead of including asm/gpio.h directly. Remove includes of asm/gpio.h, adding an include of linux/gpio.h when necessary. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge tag 'usb-for-v4.6' of ↵Greg Kroah-Hartman2016-03-042-5/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb changes for v4.6 merge window This is almost all under drivers/usb/dwc2/. Many changes to the host side implementation of dwc2 have been done by Douglas Anderson. We also have USB 3.1 support added to the Gadget Framework and, because of that work, dwc3 got support to Synopsys new DWC_usb31 IP core. Other than these 2 important series, we also have the usual collection of non-critical fixes, Documentation updates, and minor changes all over the place.
| * | usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbolArnd Bergmann2016-03-042-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB_FSL_MPH_DR_OF symbol is used to ensure the code that interprets the DR device node is built whenever one of the two drivers (EHCI or UDC) for the platform is enabled. However, if CONFIG_USB is disabled and we only support gadget mode, this causes a Kconfig warning: warning: (USB_FSL_USB2) selects USB_FSL_MPH_DR_OF which has unmet direct dependencies (USB_SUPPORT && USB) We can avoid this warning by simply no longer using the symbol, and making sure we enter the drivers/usb/host/ directory when the UDC driver is enabled that needs the file, and then we use Makefile syntax to ensure the file is built-in if needed. There is currently a dependency on CONFIG_OF, but this is redundant, as we already know that this is set unconditionally for the platforms that use this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* | | usb: ohci: nxp: remove USB PLL and USB OTG clock managementVladimir Zapolskiy2016-03-031-52/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LPC32xx common clock framework driver correctly manages parent clocks of USB OHCI clock, so there is no need to manually enable and disable them from the driver, which now depends only on a single USB host clock. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: ohci: nxp: remove direct access to clock controller registersVladimir Zapolskiy2016-03-031-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Direct access to clock control registers can be safely removed, the task of clock management is done by platform clock driver based on common clock framework. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: ehci-atmel: use __maybe_unused to hide pm functionsArnd Bergmann2016-03-031-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ehci-atmel driver uses #ifdef to check for CONFIG_PM, but then uses SIMPLE_DEV_PM_OPS, which leaves the references out when CONFIG_PM_SLEEP is not defined, so we get a warning with PM=y && PM_SLEEP=n: drivers/usb/host/ehci-atmel.c:189:12: error: 'ehci_atmel_drv_suspend' defined but not used [-Werror=unused-function] drivers/usb/host/ehci-atmel.c:203:12: error: 'ehci_atmel_drv_resume' defined but not used [-Werror=unused-function] This removes the incorrect #ifdef and instead uses a __maybe_unused annotation to let the compiler know it can silently drop the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: ohci-at91: use __maybe_unused to hide pm functionsArnd Bergmann2016-03-031-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ohci-at91 driver uses #ifdef to check for CONFIG_PM, but then uses SIMPLE_DEV_PM_OPS, which leaves the references out when CONFIG_PM_SLEEP is not defined, so we get a warning with PM=y && PM_SLEEP=n: drivers/usb/host/ohci-at91.c:587:1: error: 'ohci_hcd_at91_drv_suspend' defined but not used [-Werror=unused-function] drivers/usb/host/ohci-at91.c:631:12: error: 'ohci_hcd_at91_drv_resume' defined but not used [-Werror=unused-function] This removes the incorrect #ifdef and instead uses a __maybe_unused annotation to let the compiler know it can silently drop the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: xhci-mtk: use __maybe_unused to hide pm functionsArnd Bergmann2016-03-031-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mediatek XHCI glue driver uses SET_SYSTEM_SLEEP_PM_OPS() to conditionally set the correct suspend/resume options, and also puts both the dev_pm_ops and the functions inside of an #ifdef testing for CONFIG_PM_SLEEP, but those functions then call other code that becomes unused: drivers/usb/host/xhci-mtk.c:135:12: error: 'xhci_mtk_host_disable' defined but not used [-Werror=unused-function] drivers/usb/host/xhci-mtk.c:313:13: error: 'usb_wakeup_enable' defined but not used [-Werror=unused-function] drivers/usb/host/xhci-mtk.c:321:13: error: 'usb_wakeup_disable' defined but not used [-Werror=unused-function] This replaces the #ifdef with __maybe_unused annotations so the compiler knows it can silently drop them instead of warning. For the DEV_PM_OPS definition, we can use an IS_ENABLED() check to avoid defining the structure when CONFIG_PM is not set without the #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: host: unhide suspend/resume declarationsArnd Bergmann2016-03-032-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to hide function declarations, and making these visible to the SoC specific host drivers lets us use __maybe_unused and IS_ENABLED() checks to control their use, rather than having to use #ifdef to hide all callers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: host: Host drivers relying on DMA should depend on HAS_DMAGeert Uytterhoeven2016-03-031-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/usb/host/xhci-plat-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/xhci-mtk.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ohci-platform.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ehci-platform.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/ehci-hcd.ko] undefined! Add dependencies on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: host: xhci-plat: fix of_table.cocci warningsJulia Lawall2016-03-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure (of/i2c/platform)_device_id tables are NULL terminated Generated by: scripts/coccinelle/misc/of_table.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: host: xhci-plat: add R-Car Gen2 and Gen3 fallback compatibility stringsSimon Horman2016-03-031-0/+5
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Add fallback compatibility strings for R-Car Gen2 and Gen3. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: xhci-rcar: Use ARCH_RENESASSimon Horman2016-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: pci_quirks: fix memory leak, by adding iounmapSaurabh Sengar2016-02-141-1/+2
| | | | | | | | | | | | | | Added iounmap inorder to free memory mapped to pointer before returning Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_ISP1362_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | drivers/built-in.o: In function `isp1362_probe': /home/vegard/linux/drivers/usb/host/isp1362-hcd.c:2668: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_OXU210HP_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | drivers/built-in.o: In function `oxu_drv_probe': /home/vegard/linux/drivers/usb/host/oxu210hp-hcd.c:3821: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_OHCI_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | drivers/built-in.o: In function `ohci_platform_probe': /home/vegard/linux/drivers/usb/host/ohci-platform.c:246: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_FOTG210_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | drivers/built-in.o: In function `fotg210_hcd_probe': /home/vegard/linux/drivers/usb/host/fotg210-hcd.c:5637: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_XHCI_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | drivers/built-in.o: In function `xhci_plat_probe': /home/vegard/linux/drivers/usb/host/xhci-plat.c:160: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_EHCI_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | drivers/built-in.o: In function `ehci_platform_probe': /home/vegard/linux/drivers/usb/host/ehci-platform.c:282: undefined reference to `devm_ioremap_resource' drivers/built-in.o: In function `oxu_drv_probe': /home/vegard/linux/drivers/usb/host/oxu210hp-hcd.c:3821: undefined reference to `devm_ioremap_resource' drivers/built-in.o: In function `isp1362_probe': /home/vegard/linux/drivers/usb/host/isp1362-hcd.c:2668: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_SL811_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC drivers/usb/host/xhci-mtk.o drivers/usb/host/xhci-mtk.c:135:12: warning: ‘xhci_mtk_host_disable’ defined but not used [-Wunused-function] static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk) ^ drivers/usb/host/xhci-mtk.c:313:13: warning: ‘usb_wakeup_enable’ defined but not used [-Wunused-function] static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk) ^ drivers/usb/host/xhci-mtk.c:321:13: warning: ‘usb_wakeup_disable’ defined but not used [-Wunused-function] static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk) ^ CC drivers/usb/host/sl811-hcd.o drivers/usb/host/sl811-hcd.c: In function ‘sl811h_remove’: drivers/usb/host/sl811-hcd.c:1607:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(sl811->data_reg); ^ drivers/usb/host/sl811-hcd.c: In function ‘sl811h_probe’: drivers/usb/host/sl811-hcd.c:1669:3: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] addr_reg = ioremap(addr->start, 1); ^ drivers/usb/host/sl811-hcd.c:1669:12: warning: assignment makes pointer from integer without a cast [enabled by default] addr_reg = ioremap(addr->start, 1); ^ drivers/usb/host/sl811-hcd.c:1675:12: warning: assignment makes pointer from integer without a cast [enabled by default] data_reg = ioremap(data->start, 1); ^ Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_C67X00_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC drivers/usb/c67x00/c67x00-drv.o drivers/usb/c67x00/c67x00-drv.c: In function ‘c67x00_drv_probe’: drivers/usb/c67x00/c67x00-drv.c:148:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] c67x00->hpi.base = ioremap(res->start, resource_size(res)); ^ drivers/usb/c67x00/c67x00-drv.c:148:19: warning: assignment makes pointer from integer without a cast [enabled by default] c67x00->hpi.base = ioremap(res->start, resource_size(res)); ^ drivers/usb/c67x00/c67x00-drv.c:185:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(c67x00->hpi.base); ^ Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_R8A66597_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC drivers/usb/host/r8a66597-hcd.o drivers/usb/host/r8a66597-hcd.c: In function ‘r8a66597_remove’: drivers/usb/host/r8a66597-hcd.c:2401:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(r8a66597->reg); ^ drivers/usb/host/r8a66597-hcd.c: In function ‘r8a66597_probe’: drivers/usb/host/r8a66597-hcd.c:2447:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] reg = ioremap(res->start, resource_size(res)); ^ drivers/usb/host/r8a66597-hcd.c:2447:6: warning: assignment makes pointer from integer without a cast [enabled by default] reg = ioremap(res->start, resource_size(res)); ^ Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_XHCI_MVEBUVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/usb/host/xhci-mvebu.c: In function ‘xhci_mvebu_mbus_init_quirk’: drivers/usb/host/xhci-mvebu.c:58:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] base = ioremap(res->start, resource_size(res)); ^ drivers/usb/host/xhci-mvebu.c:58:7: warning: assignment makes pointer from integer without a cast [enabled by default] base = ioremap(res->start, resource_size(res)); ^ drivers/usb/host/xhci-mvebu.c:69:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(base); ^ Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: add HAS_IOMEM dependency to USB_ISP116X_HCDVegard Nossum2016-02-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/usb/host/isp116x-hcd.c: In function ‘isp116x_remove’: drivers/usb/host/isp116x-hcd.c:1552:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(isp116x->data_reg); ^ drivers/usb/host/isp116x-hcd.c: In function ‘isp116x_probe’: drivers/usb/host/isp116x-hcd.c:1604:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] addr_reg = ioremap(addr->start, resource_size(addr)); ^ drivers/usb/host/isp116x-hcd.c:1604:11: warning: assignment makes pointer from integer without a cast [enabled by default] addr_reg = ioremap(addr->start, resource_size(addr)); ^ drivers/usb/host/isp116x-hcd.c:1613:11: warning: assignment makes pointer from integer without a cast [enabled by default] data_reg = ioremap(data->start, resource_size(data)); ^ Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: ohci-pxa27x: propagate the irq error codeRobert Jarzmik2016-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In several drivers in the pxa architecture, it was found that the platform_get_irq() was not propagated. This breaks the the device-tree probe deferral path, if -EPROBE_DEFER is returned. Unfortunately, the error return in this case is transformed into -ENXIO, breaking the deferral mechanism. Even if in this specific case the driver was not broken, because the interrupt controller is always probed before drivers, propagate the proper return code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: Support extended burst isoc TRB structure used by xhci 1.1 for USB 3.1Mathias Nyman2016-02-142-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The transfer burst count (TBC) field in the Isoc TRB does not fit the new larger burst count available for USB 3.1 SSP Isoc tranfers. xhci 1.1 solved this by reusing the TD size field for transfer burst count. The Mult field was outgrown as well. xhci 1.1 controllers can calculate Mult itself and is not set if the new layout is used. xhci 1.1 controllers that support the new Isoc TRB format expose a Extended TBC Capability (ETC). To take the new format into use the xhci host controller driver needs to set a Extended TBC Enable (ETE) bit. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: cleanup isoc tranfers queuing codeMathias Nyman2016-02-141-72/+53
| | | | | | | | | | | | | | | | | | | | | | Clean up xhci_queue_isoc_tx() and helpers to prepare them for USB 3.1 and xhci 1.1 isoc TRB changes. Only functional change is adding xhci version 1.1 to the BEI flag check toghether with xhci version 1.0. Both versions behave the same. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: Add SuperSpeedPlus high bandwidth isoc support to xhci endpointsMathias Nyman2016-02-142-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SuperSpeedPlus doubled the number of transactions per service interval the isoc endpoints supports. To support this, xhci 1.1 added Large ESIT Capability (LEC), which takes into use new bits in the endpoint context to fit the parameters. If xhci supports LEC, and the device has a SuperSpeedPlus Isoc companion descriptor then take into use the high bits of max esit payload, and skip calculating the Mult field as it wouldn't fit. LEC capable host will calculate the Mult based on other paramenters. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: refactor and cleanup endpoint initialization.Mathias Nyman2016-02-142-96/+69
| | | | | | | | | | | | | | | | | | | | | | xhci_endpoint_init() and helper functions were a bit messy. Adding the higher bandwidth SuperSpeedPlus Isoc support on top of it would make it even harder to read. No functional changes. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 4.5-rc4 into usb-nextGreg Kroah-Hartman2016-02-148-29/+88
|\ \ | | | | | | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | xhci: harden xhci_find_next_ext_cap against device removalJoe Lawrence2016-02-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xhci_find_next_ext_cap doesn't check for PCI hotplug removal and may use the PCI master abort bit pattern (~0) to calculate a new PCI address offset to read/write. The has lead to reproducable crashes when testing surprise removal during device initialization on a Stratus platform, at least after commit d5ddcdf4d672 ("xhci: rework xhci extended capability list parsing functions"). The crash is repeatable on a Stratus platform when injecting hardware faults to induce xHCI host controller hotplug during driver initialization. If a PCI read in xhci_find_next_ext_cap returns the master abort pattern, quirk_usb_handoff_xhci may start using a bogus ext_cap_offset to start searching more bogus PCI addresses. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | xhci: Fix list corruption in urb dequeue at host removalMathias Nyman2016-02-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xhci driver frees data for all devices, both usb2 and and usb3 the first time usb_remove_hcd() is called, including td_list and and xhci_ring structures. When usb_remove_hcd() is called a second time for the second xhci bus it will try to dequeue all pending urbs, and touches td_list which is already freed for that endpoint. Cc: <stable@vger.kernel.org> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: host: xhci-plat: fix NULL pointer in probe for device tree caseGregory CLEMENT2016-02-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During probe, in the device tree case, the data pointer associated to a compatible is dereferenced. However, not all the compatibles are associated to a private data pointer. The generic-xhci and the xhci-platform don't need them, this patch adds a test on the data pointer before accessing it, avoiding a kernel crash. Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv") Cc: stable@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: xhci-mtk: fix AHB bus hang up caused by roothubs pollingChunfeng Yun2016-02-031-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TTChunfeng Yun2016-02-031-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when a LS or FS device doesn't connect though a HS hub, the @bPkts field of its periodic endpoint context should be set to 1. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platformsLu Baolu2016-02-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well. Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: xhci: set SSIC port unused only if xhci_suspend succeedsLu Baolu2016-02-031-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XHCI_SSIC_PORT_UNUSED quirk was applied to the xHCI host controllers in some Intel SoC chips. With this quirk applied, SSIC port is set to "unused" prior to xhci_suspend(). This may cause problem if host fails to suspend. In this case, the port is set to unused without host further entering D3, and the port will not be usable anymore. Cc: stable@vger.kernel.org Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: xhci: add a quirk bit for ssic port unusedLu Baolu2016-02-032-34/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two workarounds introduced by commit b8cb91e058cd ("xhci: Workaround for PME stuck issues in Intel xhci") and commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") share a single quirk bit XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and might happen on different hardwares. Need to separate them by adding a quirk bit for the later. Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: xhci: handle both SSIC ports in PME stuck quirkLu Baolu2016-02-031-19/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"Mathias Nyman2016-02-031-10/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e210c422b6fd ("xhci: don't finish a TD if we get a short transfer event mid TD") Turns out that most host controllers do not follow the xHCI specs and never send the second event for the last TRB in the TD if there was a short event mid-TD. Returning the URB directly after the first short-transfer event is far better than never returning the URB. (class drivers usually timeout after 30sec). For the hosts that do send the second event we will go back to treating it as misplaced event and print an error message for it. The origial patch was sent to stable kernels and needs to be reverted from there as well Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: r8a66597: add locking to r8a66597_check_detect_childHeiner Kallweit2016-02-061-0/+2
| | | | | | | | | | | | | | Use mutex usb_bus_idr_lock to protect idr_find. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 03:11:03 +0000