summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/sunxi.c
Commit message (Collapse)AuthorAgeFilesLines
* usb: musb: Add musb_clearb/w() interfaceMin Guo2020-01-151-2/+2
| | | | | | | | | | | | | | | Delete the const attribute of addr parameter in readb/w/l hooks, these changes are for implementing clearing W1C registers. Replace musb_readb/w with musb_clearb/w to clear the interrupt status. While at here, change some unsigned type to u32 to fix checkpatch.pl warnings. Signed-off-by: Min Guo <min.guo@mediatek.com> [b-liu@ti.com: fix checkpatch.pl warnings.] Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-23-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: propagate devicetree node to glue pdevMans Rullgard2020-01-151-0/+2
| | | | | | | | | | In order for devicetree nodes to be correctly associated with attached devices, the controller node needs to be propagated to the glue device. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: remove references to default_a of struct usb_otgBin Liu2018-05-221-2/+0
| | | | | | | | | | | musb drivers do not use the otg fsm framework, so referencing to otg->default_a doesn't have any effect, so remove the references. But tusb6010 glue driver uses it locally to control the vbus power, so keep the references in tusb6010 only. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: remove unused members in struct musb_hdrc_configBin Liu2018-05-221-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | The following members in struct musb_hdrc_config are not used, so remove them. soft_con utm_16 big_endian mult_bulk_tx mult_bulk_rx high_iso_tx high_iso_rx dma dma_channels dyn_fifo_size vendor_ctrl vendor_stat vendor_req dma_req_chan musb_hdrc_eps_bits Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: remove duplicated port mode enumBin Liu2018-05-221-4/+4
| | | | | | | | include/linux/usb/musb.h already defines enum for musb port mode, so remove the duplicate in musb_core.h and use the definition in musb.h. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: musb: Remove redundant license textGreg Kroah-Hartman2017-11-071-10/+0
| | | | | | | | | | | | | | | | | | Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman2017-11-041-0/+1
| | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: Explicitly release USB PHY on exitJonathan Liu2017-10-171-0/+2
| | | | | | | | | | | | This fixes a kernel oops when unloading the driver due to usb_put_phy being called after usb_phy_generic_unregister when the device is detached. Calling usb_phy_generic_unregister causes x->dev->driver to be NULL in usb_put_phy and results in a NULL pointer dereference. Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: add support for the variant in H3/V3s SoCIcenowy Zheng2017-02-031-2/+33
| | | | | | | | | | | | | Allwinner H3/V3s features a variant of MUSB controller, which lacks one endpoint. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [b-liu@ti.com: added usb: to commit subject prefix] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: Uses the resource-managed extcon API when registering ↵Chanwoo Choi2017-02-031-9/+3
| | | | | | | | | | | | extcon notifier This patch just uses the resource-managed extcon API when registering the extcon notifier. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: constify musb_hdrc_config structuresBhumika Goyal2017-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Declare musb_hdrc_config structures as const as they are only stored in the config field of a musb_hdrc_platform_data structure. This field is of type const, so musb_hdrc_config structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct musb_hdrc_config x@p={...}; @ok@ struct musb_hdrc_platform_data pdata; identifier r.x; position p; @@ pdata.config=&x@p; @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct musb_hdrc_config x; File size before: text data bss dec hex filename 1212 338 0 1550 60e drivers/usb/musb/jz4740.o File size after: text data bss dec hex filename 1268 290 0 1558 616 drivers/usb/musb/jz4740.o File size before: text data bss dec hex filename 6151 333 16 6500 1964 drivers/usb/musb/sunxi.o File size after: text data bss dec hex filename 6215 269 16 6500 1964 drivers/usb/musb/sunxi.o File size before: text data bss dec hex filename 3668 864 0 4532 11b4 drivers/usb/musb/ux500.o File size after: text data bss dec hex filename 3724 808 0 4532 11b4 drivers/usb/musb/ux500.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* musb: sunxi: Force session end on babble errors in host-modeHans de Goede2016-11-211-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | The sunxi musb has a bug where sometimes it will generate a babble error on device disconnect instead of a disconnect irq. When this happens the musb-controller switches from host mode to device mode (it clears MUSB_DEVCTL_SESSION and sets MUSB_DEVCTL_BDEVICE) and gets stuck in this state. Clearing this requires reporting Vbus low for 200 or more ms, but on some devices Vbus is simply always high (host-only mode, no Vbus control). This commit adds a sunxi_musb_recover() callback which makes sunxi_musb_work call phy_set_mode with the current mode, which will force end the current session. This fixes the musb controller getting stuck in this state on systems without Vbus control; and also fixes the need to unplug the usb-b -> usb-a cable to get out of this state on systems with Vbus control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* musb: sunxi: Remove custom babble handlingHans de Goede2016-11-211-10/+0
| | | | | | | | | The musb core already handles babble interrupts, so the sunxi glue having its own custom handling is redundant. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* musb: sunxi: Add support for platform_set_modeHans de Goede2016-09-131-4/+57
| | | | | | | | | This allows run-time dr_mode switching support via the "mode" musb sysfs attribute. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: Simplify dr_mode handlingHans de Goede2016-07-171-43/+25
| | | | | | | | | | | | | | | | | phy-sun4i-usb now has proper dr_mode handling, it always registers an extcon, and sends a notify with the mode (even when in peripheral- / host-only mode) at least once. So we can simply the sunxi musb glue by always registering its extcon notifier and relying on sunxi_musb_work() to enable vbus when in host-only mode. This also enables host- and peripheral-only mode with vbus monitoring. Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: make unexported symbols staticBen Dooks2016-07-171-3/+3
| | | | | | | | | | | | | The sunxi_musb_dma_controller_create and _destroy are not exported or used outside the driver, so fix sparse warnings by making these two static: drivers/usb/musb/sunxi.c:357:23: warning: symbol 'sunxi_musb_dma_controller_create' was not declared. Should it be static? drivers/usb/musb/sunxi.c:363:6: warning: symbol 'sunxi_musb_dma_controller_destroy' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: Remove bogus "Frees glue" commentHans de Goede2016-06-141-1/+1
| | | | | | | | | | | The comment is wrong, glue is devm_kzalloc-ed mem attached to the "allwinner,sun4i-a10-musb" compatible platform-dev. Where as glue->musb_pdev is a newly created "musb-hdrc" platform-dev. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musbHans de Goede2016-06-141-6/+9
| | | | | | | | | | | | | | | | | Stop using the return value of platform_device_register_full() to get to the struct musb in sunxi_musb_work(). If a gadget has been registered (insmod-ed) before the musb driver, then musb_start will get called from the musb_core probe function and sunxi_musb_work() may run before platform_device_register_full() has returned. Instead store a pointer to struct musb in struct sunxi_glue when sunxi_musb_enable gets called. Note that sunxi_musb_enable always gets called before sunxi_musb_work() can run. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: Set state to A_WAIT_VRISE when enabling VbusHans de Goede2016-06-011-3/+6
| | | | | | | | | | | | | | | | | When the board is powering attached usb devices via the otg port sometimes / on some devices it takes slightly too long for the Vbus detection code in phy-sun4i-usb.c to signal that Vbus is high after enabling Vbus and the musb hardware signals a MUSB_INTR_VBUSERROR interrupt. This commit sets the otg state to A_WAIT_VRISE upon enabling Vbus making musb_stage0_irq() ignore the first VBUSERR_RETRY_COUNT VBUSERROR interrupts, fixing connection issues in these cases. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: sunxi: Add set_mode platform functionHans de Goede2016-06-011-11/+19
| | | | | | | | | Move the mode handling to the platform_set_mode callback. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* [media] usb: musb: sunxi: support module autoloadingEmilio López2016-03-031-0/+1
| | | | | | | | | | | MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on sunxi systems using the OTG controller. This commit adds the missing line so it loads automatically when building it as a module and running on a system with an USB OTG port. Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* musb: sunxi: Make sunxi musb glue work without MUSB_PIO_ONLYHans de Goede2015-10-091-0/+12
| | | | | | | | | | | | | Now that it is possible to build in multiple dma engines, we can no longer require MUSB_PIO_ONLY to be set when using the sunxi musb glue. This patch adds dummy dma hooks to make the musb glue work without MUSB_PIO_ONLY. This hooks are fake because we do not support dma with musb on sunxi. The Allwinnner Android kernels have some dma code, but it is disabled as Allwinner never managed to get it to work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: common: of_usb_get_dr_mode to usb_get_dr_modeHeikki Krogerus2015-09-271-1/+1
| | | | | | | | | By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: sunxi: Add support for musb controller in A33 SoCHans de Goede2015-07-291-0/+15
| | | | | | | | | The A33 SoC uses the same musb controller as found on the A31 and later, but allwinner has removed the configdata register, this commit adds special handling for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: sunxi: Add support for musb controller in A31 SoCHans de Goede2015-07-291-6/+44
| | | | | | | | | | The A31 SoC uses the same musb controller as found in earlier SoCs, but it is hooked up slightly different. Its SRAM is private and no longer controlled through the SRAM controller, and its reset is controlled via a separate reset controller. This commit adds support for this setup. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: sunxi: Add support for the Allwinner sunxi musb controllerHans de Goede2015-07-291-0/+703
This is based on initial code to get the Allwinner sunxi musb controller supported by Chen-Yu Tsai and Roman Byshko. This adds support for the Allwinner sunxi musb controller in both host only and otg mode. Peripheral only mode is not supported, as no boards use that. This has been tested on a cubietruck (A20 SoC) and an UTOO P66 tablet (A13 SoC) with a variety of devices in host mode and with the g_serial gadget driver in peripheral mode, plugging otg / host cables in/out a lot of times in all possible imaginable plug orders. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 13:40:27 +0000