summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
Commit message (Collapse)AuthorAgeFilesLines
...
| * USB: serial: ftdi_sio: simplify TIOCGSERIAL permission checkJohan Hovold2021-04-081-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Changing the deprecated custom_divisor field is an unprivileged operation so after verifying that flag field does not contain any privileged changes both updates can be carried out by any user. Combine the two branches and drop the erroneous comment. Note that private flags field is only used for ASYNC flags so there's no need to try to retain any other bits when updating the flags. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ftdi_sio: ignore baud_base changesJohan Hovold2021-04-081-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | The TIOCSSERIAL error handling is inconsistent at best, but drivers tend to ignore requests to change parameters which cannot be changed rather than return an error. The FTDI driver ignores change requests for all immutable parameters but baud_base so return success also in this case for consistency. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: stop reporting legacy UART typesJohan Hovold2021-04-0811-58/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TIOCGSERIAL ioctl can be used to set and retrieve the UART type for legacy UARTs, but some USB serial drivers have been reporting back random types in order to "make user-space happy". Some applications have historically expected TIOCGSERIAL to be implemented, but judging from the Debian sources, the port type not being PORT_UNKNOWN is only used to check for the existence of legacy serial ports (ttySn). Drivers like ftdi_sio have been using PORT_UNKNOWN for twenty years (and option for 10 years) without anyone complaining so let's stop reporting back anything else. In the unlikely event that this do cause problems, this should be fixed tree-wide anyway (e.g. for all USB serial drivers and also CDC-ACM). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: add generic support for TIOCSSERIALJohan Hovold2021-04-0818-225/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The closing_wait parameter determines how long to wait for the transfer buffers to drain during close and the default timeout of 30 seconds may not be sufficient at low line speeds. In other cases, when for example flow is stopped, the default timeout may instead be too long. Add generic support for TIOCSSERIAL and TIOCGSERIAL with handling of the three common parameters close_delay, closing_wait and line for the benefit of all USB serial drivers while still allowing drivers to implement further functionality through the existing callbacks. This currently includes a few drivers that report their base baud clock rate even if that is really only of interest when setting custom divisors through the deprecated ASYNC_SPD_CUST interface; an interface which only the FTDI driver actually implements. Some drivers have also been reporting back a fake UART type, something which should no longer be needed and will be dropped by a follow-on patch. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: fix return value for unsupported ioctlsJohan Hovold2021-04-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned -EINVAL when a USB serial driver did not implement the corresponding methods. Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a corresponding Fixes tag below. Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: whiteheat: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: usb_wwan: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The baud_base parameter could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. Fix the usb_wwan TIOCGSERIAL implementation by dropping its custom interpretation of the unused port and baud_base fields, which were set to the port index and current line speed, respectively. Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: usb_wwan: fix unprivileged TIOCCSERIALJohan Hovold2021-04-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. A non-privileged user has only ever been able to set the since long deprecated ASYNC_SPD flags and trying to change any other *supported* feature should result in -EPERM being returned. Setting the current values for any supported features should return success. Fix the usb_wwan implementation which instead indicated that the TIOCSSERIAL ioctl was not even implemented when a non-privileged user set the current values. Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversionsJohan Hovold2021-04-081-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | The port close_delay and closing_wait parameters set by TIOCSSERIAL are specified in jiffies and not milliseconds. Add the missing conversions so that the TIOCSSERIAL works as expected also when HZ is not 1000. Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)") Cc: stable@vger.kernel.org # 2.6.38 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission checkJohan Hovold2021-04-081-2/+7
| | | | | | | | | | | | | | | | | | Changing the port closing-wait parameter is a privileged operation so make sure to return -EPERM if a regular user tries to change it. Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ti_usb_3410_5052: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing close_delay, but let's report back the default value actually used (0.5 seconds). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ssu100: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: 52af95459939 ("USB: add USB serial ssu100 driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: quatech2: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: pl2303: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The baud_base parameter could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: opticon: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: faac64ad9c7b ("USB: serial: opticon: add serial line ioctls") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: mos7840: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: mos7720: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: io_ti: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing close_delay, but let's report back the default value actually used (0.5 seconds). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: io_edgeport: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the uart base clock when it could not be detected, but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ftdi_sio: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The FTDI driver is the only USB serial driver supporting the deprecated ASYNC_SPD flags, which are reported back as they should by TIOCGSERIAL, but the returned parameters did not include the line number. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: f81534: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: aac1fc386fa1 ("USB: serial: add Fintek F81232 usb to serial driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: f81232: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: aac1fc386fa1 ("USB: serial: add Fintek F81232 usb to serial driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ark3116: fix TIOCGSERIAL implementationJohan Hovold2021-04-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The baud_base parameter could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: 2f430b4bbae7 ("USB: ark3116: Add TIOCGSERIAL and TIOCSSERIAL ioctl calls.") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: xr: claim both interfacesJohan Hovold2021-04-011-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | Use the new multi-interface support in USB serial core to properly claim also the control interface during probe. This prevents having another driver claim the control interface and makes core allocate resources also for the interrupt endpoint (currently unused). Switch to probing only Communication Class interfaces and use the Union functional descriptor to determine the corresponding data interface. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: add support for multi-interface functionsJohan Hovold2021-04-011-11/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A single USB function can be implemented using a group of interfaces and this is for example commonly used for Communication Class devices. Add support for multi-interface functions to USB serial core and export an interface that allows drivers to claim a second sibling interface. The interface could easily be extended to allow claiming further interfaces if ever needed. When a driver claims a sibling interface in probe(), core allocates resources for any bulk in, bulk out, interrupt in and interrupt out endpoints found also on the sibling interface. Disconnect is implemented so that unbinding either interface will release the other interface while disconnect() is called precisely once. Similarly, suspend() is called when the first sibling interface is suspended and resume() is called when the last sibling interface is resumed by USB core. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: refactor endpoint classificationJohan Hovold2021-04-011-20/+31
| | | | | | | | | | | | | | | | | | Refactor endpoint classification and replace the build-time endpoint-array sanity checks with runtime checks in preparation for handling endpoints from a sibling interface. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: drop unused suspending flagJohan Hovold2021-04-011-7/+1
| | | | | | | | | | | | | | | | The suspending flag was added back in 2009 but no users ever followed. Remove it. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: xr: fix CSIZE handlingJohan Hovold2021-04-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | The XR21V141X does not have a 5- or 6-bit mode, but the current implementation failed to properly restore the old setting when CS5 or CS6 was requested. Instead an invalid request would be sent to the device. Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: iuu_phoenix: remove redundant variable 'error'Colin Ian King2021-04-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | The variable error is initialized to 0 and is set to 1 this value is never read as it is on an immediate return path. The only read of error is to check it is 0 and this check is always true at that point of the code. The variable is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: pl2303: TA & TB alternate divider with non-standard baud ratesMichael G. Katzmann2021-03-171-0/+44
| | | | | | | | | | | | | | | | | | | | | | Use an alternate clock divider algorithm and bit ordering for the TA and TB versions of the pl2303. It was discovered that these variants do not produce the correct baud rates with the existing scheme. see https://lore.kernel.org/r/3aee5708-7961-f464-8c5f-6685d96920d6@IEEE.org Signed-off-by: Michael G. Katzmann <michaelk@IEEE.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: pl2303: add device-type namesJohan Hovold2021-03-171-1/+8
| | | | | | | | | | | | | | | | | | | | Add names for the device types to be printed at probe when debugging is enabled. Note that the HXN type is referred to as G for now as that is the name the vendor uses. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: pl2303: tighten type HXN (G) detectionJohan Hovold2021-03-171-12/+20
| | | | | | | | | | | | | | Tighten the detection of the new HXN (G) type instead of assuming that every device which doesn't support the old read request is an HXN. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: pl2303: rename legacy PL2303H typeJohan Hovold2021-03-171-6/+6
| | | | | | | | | | | | | | Rename the legacy type which is supposedly a PL2303H which came in two variants (and which we handle the same way). Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: pl2303: amend and tighten type detectionJohan Hovold2021-03-171-8/+42
| | | | | | | | | | | | | | | | | | | | Add support for detecting the HX, TA, TB and HXD device types and refuse to bind to any unknown types. Note that the HX type includes the XA variant, while the HXD type includes the EA, RA and SA variants. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: pl2303: clean up type detectionJohan Hovold2021-03-171-26/+42
| | | | | | | | | | | | | | | | | | Clean up the type detection somewhat in preparation for adding support for more types. Note this also fixes the type debug printk for the new HXN type. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: io_edgeport: drop unneeded forward declarationsJiri Slaby2021-03-151-44/+1
| | | | | | | | | | | | | | | | | | | | | | | | Forward declarations make the code larger and rewrites harder. Harder as they are often omitted from global changes. Remove forward declarations which are not really needed, i.e. the definition of the function is before its first use. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ johan: update the prototype comments ] Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: keyspan: drop unneeded forward declarationsJiri Slaby2021-03-151-20/+0
| | | | | | | | | | | | | | | | | | | | | | Forward declarations make the code larger, harder to follow and rewrite. Harder as the declarations are often omitted from global changes. Remove forward declarations which are not really needed, i.e. when the definition of the function is before its first use. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | Merge 5.12-rc3 into tty-nextGreg Kroah-Hartman2021-03-154-35/+20
|\| | | | | | | | | | | | | | | Resolves a merge issue with: drivers/tty/hvc/hvcs.c and we want the tty/serial fixes from 5.12-rc3 in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: serial: io_edgeport: fix memory leak in edge_startupPavel Skripkin2021-03-091-10/+16
| | | | | | | | | | | | | | | | | | | | | | | | sysbot found memory leak in edge_startup(). The problem was that when an error was received from the usb_submit_urb(), nothing was cleaned up. Reported-by: syzbot+59f777bdcbdd7eea5305@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver") Cc: stable@vger.kernel.org # 2.6.21: c5c0c55598ce Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ch341: add new Product IDNiv Sardi2021-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add PID for CH340 that's found on cheap programmers. The driver works flawlessly as soon as the new PID (0x9986) is added to it. These look like ANU232MI but ship with a ch341 inside. They have no special identifiers (mine only has the string "DB9D20130716" printed on the PCB and nothing identifiable on the packaging. The merchant i bought it from doesn't sell these anymore). the lsusb -v output is: Bus 001 Device 009: ID 9986:7523 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x9986 idProduct 0x7523 bcdDevice 2.54 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0027 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Signed-off-by: Niv Sardi <xaiki@evilgiggle.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: xr: fix NULL-deref on disconnectJohan Hovold2021-03-091-25/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Claiming the sibling control interface is a bit more involved and specifically requires adding support to USB-serial core for managing either interface being unbound first, something which could otherwise lead to a NULL-pointer dereference. Similarly, additional infrastructure is also needed to handle suspend properly. Since the driver currently isn't actually using the control interface, we can defer this for now by simply not claiming the control interface. Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: cp210x: add some more GE USB IDsSebastian Reichel2021-03-091-0/+2
| | | | | | | | | | | | | | | | | | GE CS1000 has some more custom USB IDs for CP2102N; add them to the driver to have working auto-probing. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: cp210x: add ID for Acuity Brands nLight Air AdapterKaran Singhal2021-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | IDs of nLight Air Adapter, Acuity Brands, Inc.: vid: 10c4 pid: 88d8 Signed-off-by: Karan Singhal <karan.singhal@acuitybrands.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
* | tty: make everyone's write_room return >= 0Jiri Slaby2021-03-101-1/+1
|/ | | | | | | | | The tty line disciplines don't expect tty_operations::write_room to return negative values. Fix the five drivers which violate this. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-44-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Replace lkml.org links with loreKees Cook2021-02-111-3/+4
| | | | | | | | | | | As started by commit 05a5f51ca566 ("Documentation: Replace lkml.org links with lore"), replace lkml.org links with lore to better use a single source that's more likely to stay available long-term. Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210210235330.3292719-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-serial-5.12-rc1' of ↵Greg Kroah-Hartman2021-02-1042-224/+881
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.12-rc1 Here are the USB-serial updates for 5.12-rc1, including: - a line-speed fix for newer pl2303 devices - a line-speed fix for FTDI FT-X devices - a new xr_serial driver for MaxLinear/Exar devices (non-ACM mode) - a cdc-acm blacklist entry for when the xr_serial driver is enabled - cp210x support for software flow control - various cp210x modem-control fixes - an updated ZTE P685M modem entry to stop claiming the QMI interface - an update to drop the port_remove() driver-callback return value Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (41 commits) USB: serial: drop bogus to_usb_serial_port() checks USB: serial: make remove callback return void USB: serial: drop if with an always false condition USB: serial: option: update interface mapping for ZTE P685M USB: serial: ftdi_sio: restore divisor-encoding comments USB: serial: ftdi_sio: fix FTX sub-integer prescaler USB: serial: cp210x: clean up auto-RTS handling USB: serial: cp210x: fix RTS handling USB: serial: cp210x: clean up printk zero padding USB: serial: cp210x: clean up flow-control debug message USB: serial: cp210x: drop shift macros USB: serial: cp210x: fix modem-control handling USB: serial: cp210x: suppress modem-control errors USB: serial: mos7720: fix error code in mos7720_write() USB: serial: xr: fix B0 handling USB: serial: xr: fix pin configuration USB: serial: xr: fix gpio-mode handling USB: serial: xr: simplify line-speed logic USB: serial: xr: clean up line-settings handling USB: serial: xr: document vendor-request recipient ...
| * USB: serial: drop bogus to_usb_serial_port() checksJohan Hovold2021-02-091-13/+3
| | | | | | | | | | | | | | | | | | | | | | | | The to_usb_serial_port() macro is implemented using container_of() so there's no need to check for NULL. Note that neither bus match() or probe() is ever called with a NULL struct device pointer so the checks weren't just misplaced. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: make remove callback return voidUwe Kleine-König2021-02-0936-119/+52
| | | | | | | | | | | | | | | | | | | | | | All usb_serial drivers return 0 in their remove callbacks and driver core ignores the value returned by usb_serial_device_remove(). So change the remove callback to return void and return 0 unconditionally in usb_serial_device_remove(). Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210208143149.963644-2-uwe@kleine-koenig.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: drop if with an always false conditionUwe Kleine-König2021-02-091-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In a bus remove function the passed device is always valid, so there is no need to check for it being NULL. (Side note: The check for port being non-NULL is broken anyhow, because to_usb_serial_port() is a wrapper around container_of() for a member that is not the first one. So port can hardly become NULL.) Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210208143149.963644-1-uwe@kleine-koenig.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: option: update interface mapping for ZTE P685MLech Perczak2021-02-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares for qmi_wwan driver support for the device. Previously "option" driver mapped itself to interfaces 0 and 3 (matching ff/ff/ff), while interface 3 is in fact a QMI port. Interfaces 1 and 2 (matching ff/00/00) expose AT commands, and weren't supported previously at all. Without this patch, a possible conflict would exist if device ID was added to qmi_wwan driver for interface 3. Update and simplify device ID to match interfaces 0-2 directly, to expose QCDM (0), PCUI (1), and modem (2) ports and avoid conflict with QMI (3), and ADB (4). The modem is used inside ZTE MF283+ router and carriers identify it as such. Interface mapping is: 0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1275 Rev=f0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: Johan Hovold <johan@kernel.org> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20210207005443.12936-1-lech.perczak@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-25 01:25:58 +0000