summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage
Commit message (Collapse)AuthorAgeFilesLines
* USB: storage: Add another unusual_dev for off-by-one bugPhil Dibowitz2009-01-271-0/+7
| | | | | | | | | | | | Argosy has released another device with the off-by-one sector. This is a harddrive with an internal cardreader which is affected. Based on a patch written by Martijn Hijdra <martijn.hijdra@gmail.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: Martijn Hijdra <martijn.hijdra@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_dev: usb-storage needs to ignore a devicePhil Dibowitz2009-01-271-0/+7
| | | | | | | | | | | | | | | This patch adds an unusual_devs entry for a Sony Ericsson modem. Like many other modems, we have to ignore the storage device in order to access the modem. At this time usb_modeswitch does not work with this device. Reported-by: The Solutor <thesolutor@gmail.com>. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Remove ZTE modem from unusual_devicesPhil Dibowitz2009-01-271-10/+0
| | | | | | | | | | | | | | The ZTE modem entry causes usb-storage to ignore the device, but for some versions of the device, usb-storage mode is required to get to modem ode. For both kinds the tool: http://www.draisberghof.de/usb_modeswitch/ should work. Note that the various versions of the device have the same ProductId, VendorId, and bcdDevice number, so we cannot have the entry for some and not others. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: support of Dane-Elec MediaTouch USB deviceJean-Baptiste Onofre2009-01-271-0/+10
| | | | | | | | | | This adds another unusual_devs.h entry for a device that can't handle more than 64k reads/writes in a single command. Signed-off-by: Jean-Baptiste Onofre <jb@nanthrax.net> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: add unusual devs entryOliver Neukum2009-01-271-0/+6
| | | | | | | | | This adds an unusual devs entry for 2116:0320 Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: set CAPACITY_HEURISTICS flag for bad vendorsAlan Stern2009-01-072-155/+23
| | | | | | | | | | | | | | | | | | | This patch (as1194) makes usb-storage set the CAPACITY_HEURISTICS flag for all devices made by Nokia, Nikon, or Motorola. These companies seem to include the READ CAPACITY bug in all of their devices. Since cell phones and digital cameras rely on flash storage, which always has an even number of sectors, setting CAPACITY_HEURISTICS shouldn't cause any problems. Not even if the companies wise up and start making devices without the bug. A large number of unusual_devs entries are now unnecessary, so the patch removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: make the "quirks=" module parameter writableAlan Stern2009-01-071-100/+69
| | | | | | | | | | | | | This patch (as1190) makes usb-storage's "quirks=" module parameter writable, so that users can add entries for their devices at runtime with no need to reboot or reload usb-storage. New codes are added for the SANE_SENSE, CAPACITY_HEURISTICS, and CAPACITY_OK flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: add last-sector hacksAlan Stern2009-01-076-1/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1189b) adds some hacks to usb-storage for dealing with the growing problems involving bad capacity values and last-sector accesses: A new flag, US_FL_CAPACITY_OK, is created to indicate that the device is known to report its capacity correctly. An unusual_devs entry for Linux's own File-backed Storage Gadget is added with this flag set, since g_file_storage always reports the correct capacity and since the capacity need not be even (it is determined by the size of the backing file). An entry in unusual_devs.h which has only the CAPACITY_OK flag set shouldn't prejudice libusual, since the device will work perfectly well with either usb-storage or ub. So a new macro, COMPLIANT_DEV, is added to let libusual know about these entries. When a last-sector access succeeds and the total number of sectors is odd (the unexpected case, in which guessing that the number is even might cause trouble), a WARN is triggered. The kerneloops.org project will collect these warnings, allowing us to add CAPACITY_OK flags for the devices in question before implementing the default-to-even heuristic. If users want to prevent the stack dump produced by the WARN, they can disable the hack by adding an unusual_devs entry for their device with the CAPACITY_OK flag. When a last-sector access fails three times in a row and neither the FIX_CAPACITY nor the CAPACITY_OK flag is set, we assume the last-sector bug is present. We replace the existing status and sense data with values that will cause the SCSI core to fail the access immediately rather than retry indefinitely. This should fix the difficulties people have been having with Nokia phones. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual dev for Option N.V. ZeroCD modemsDan Williams2009-01-075-1/+177
| | | | | | | | | | | | | | | | | | | Many newer Option mobile broadband devices initially provide a usb-storage "driver CD" device that's pretty useless on Linux since any software on it most likely wouldn't be compatible with your kernel or distro anyway. Thus, by default just kill the driver CD device by sending the SCSI 'rezero' command, but allow override of the default behavior via usb-storage module parameter so users can keep the ZeroCD device if they really want to. Inspired by the Sierra TruInstall patch. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Peter Henn <p.henn@option.com Cc: Denis Joseph Barrow <D.Barow@option.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: merge DPCM support into SDDR09Alan Stern2009-01-078-134/+69
| | | | | | | | | | | | | | | | | | | | | | | The DPCM subdriver is a little peculiar, in that it's meant to support devices where LUN 0 is Compact Flash and uses the CB transport whereas LUN 1 is SmartMedia and uses the SDDR09 transport. Thus DPCM isn't really a transport in itself; it's more like a demultiplexer. Much of the DPCM code is part of the SDDR09 subdriver already, and the remaining part is fairly small. This patch (as1182) moves that extra piece into sddr09.c, thereby eliminating dpcm.c. Also eliminated is the Kconfig entry for DPCM support; it is now listed as part of the SDDR09 entry. In order to make sure that the semantics are the same as before, each unusual_devs entry for DPCM is now present twice: once with DPCM support if SDDR09 is configured (as before), and once with the SINGLE_LUN flag and CB support otherwise. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: set bounce limit for non-DMA-capable host controllersAlan Stern2009-01-071-0/+8
| | | | | | | | | | | | | | | | | | | | This patch (as1175) makes usb-storage set a SCSI device's request-queue bounce limit such that all buffers will be located in addressable memory (i.e., not in high memory) if the host controller's dma_mask is NULL. This is necessary when the host controller doesn't support DMA: If a buffer is in high memory then the both the virtual and DMA addresses produced by the scatter-gather library will be NULL, preventing the HCD from accessing the buffer's data. In particular, the isp1760 driver needs this when used on a system with more than 1 GB of memory. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Acked-by: Jens Axboe <jens.axboe@oracle.com> Tested-by: Thomas Hommel <Thomas.Hommel@gefanuc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: merge ATAPI and QIC-157 protocol routinesAlan Stern2009-01-073-27/+6
| | | | | | | | | | | This patch (as1174) merges usb-storage's QIC-157 and ATAPI protocol routines. Since the two functions are identical, there's no reason to keep them separate. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: merge CB and CBI transport routinesAlan Stern2009-01-073-55/+10
| | | | | | | | | | | This patch (as1173) merges usb-storage's CB and CBI transports into a single routine. So much of their code is common, it's silly to keep them separate. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: Flag devices known to support SANE_SENSEBen Efros2009-01-071-4/+37
| | | | | | | | | | | | | | | | | Add a few devices known to have support for larger sense buffers. Supporting SANE_SENSE does not necessarily mean SAT-1 or SAT-2 is fully supported. Depends on SANE_SENSE patch [1]. Incorporates the Maxtor and Western Digital devices originally submitted by Matthieu CASTET [2]. [1] https://lists.one-eyed-alien.net/pipermail/usb-storage/2008-November/004181.html [2] http://marc.info/?l=linux-usb&m=121762869915609&w=2 Signed-off-by: Ben Efros <ben@pc-doctor.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage devices and SATBen Efros2009-01-072-1/+43
| | | | | | | | | | | | | | | | | | | Add the SANE SENSE flag to indicate that a device is capable of handling more than 18-bytes of sense data. This functionality is required for USB-ATA bridges implementing SAT. A future patch will actually enable this function for several devices. The logic behind this is that we can detect support for SANE_SENSE in a few ways: 1) ATA PASS THROUGH (12) or (16) execute successfully 2) SPC-3 or higher is in use 3) A previous CHECK CONDITION occurred with sense format 70-73 and had a length greater than 18-bytes total Signed-off-by: Ben Efros <ben@pc-doctor.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: remove us->sensebufAlan Stern2009-01-072-9/+0
| | | | | | | | | This patch (as1171) removes us->sensebuf, since it isn't used anywhere. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: clean up unusual_devs.hAlan Stern2009-01-071-57/+39
| | | | | | | | | This patch (as1170) removes some duplicate entries in unusual_devs.h and rearranges a few others to put the list in proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: add "quirks=" module parameterAlan Stern2009-01-071-0/+113
| | | | | | | | | | | | | | | | | This patch (as1163b) adds a "quirks=" module parameter to usb-storage. This will allow people to make short-term changes to their unusual_devs list without rebuilding the entire driver. Testing will become much easier, and less-sophisticated users will be able to access their buggy devices after a simple config-file change instead of having to wait for a new kernel release. The patch also adds a documentation entry for usb-storage's "delay_use" parameter, which has been around for years but but was never listed among the kernel parameters. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: change interface to usb_lock_device_for_reset()Alan Stern2009-01-071-5/+3
| | | | | | | | | | | | | | | | | | | This patch (as1161) changes the interface to usb_lock_device_for_reset(). The existing interface is apparently not very clear, judging from the fact that several of its callers don't use it correctly. The new interface always returns 0 for success and it always requires the caller to unlock the device afterward. The new routine will not return immediately if it is called while the driver's probe method is running. Instead it will wait until the probe is over and the device has been unlocked. This shouldn't cause any problems; I don't know of any cases where drivers call usb_lock_device_for_reset() during probe. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: unusual_devs.h additions for Macpower MasterBoxSergey Ovcharenko2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Jason Johnston reported these problems with his external USB hard drive: http://bugs.gentoo.org/show_bug.cgi?id=250789 The number of reported sectors is off-by-one. /proc/bus/usb/devices: T: Bus=01 Lev=02 Prnt=08 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0dc4 ProdID=0073 Rev= 0.00 S: Manufacturer=Macpower Technology Co.LTD. S: Product=USB 2.0 3.5" DEVICE S: SerialNumber=03006C C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sergey Ovcharenko <velegrin@mail.mipt.ru> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: recognizing and enabling Nokia 5200 cell phoesPaulo Afonso Graner Fessel2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the issue when one connects a Nokia 5200 cell phone in data storage mode. If one uses an unpatched unusual_devs.h, the following messages appear on /var/log/messages: Dec 12 01:03:24 alberich kernel: usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 12 01:03:25 alberich kernel: usb 4-2: configuration #1 chosen from 1 choice Dec 12 01:03:25 alberich kernel: scsi10 : SCSI emulation for USB Mass Storage devices Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device found, idVendor=0421, idProduct=04bd Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dec 12 01:03:25 alberich kernel: usb 4-2: Product: Nokia 5200 Dec 12 01:03:25 alberich kernel: usb 4-2: Manufacturer: Nokia Dec 12 01:03:25 alberich kernel: usb 4-2: SerialNumber: 353930018354523 Dec 12 01:03:25 alberich kernel: usbcore: registered new interface driver ub Dec 12 01:03:30 alberich kernel: scsi 10:0:0:0: Direct-Access Nokia Nokia 5200 0000 PQ: 0 AN SI: 4 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sdg: sdg1 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Attached SCSI removable disk Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: Attached scsi generic sg9 type 0 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] (...) The MicroSD card in the phone remains inaccessible and finally the cell phone turns itself off. The patch solves this problem and makes the cell phone fully accessible: [root@alberich kernel-linus-2.6.27.5-1mdv]# df -h Sist. Arq. Tam Usad Disp Uso% Montado em /dev/sda6 31G 5,2G 26G 17% / /dev/sda1 92M 27M 61M 31% /boot /dev/mapper/homevg-homelv 240G 237G 3,5G 99% /home /dev/sda3 21G 7,9G 13G 40% /mnt/windows /dev/sdg1 2,0G 287M 1,7G 15% /media/disk <-------- I've found necessary to use the FL_US_CAPACITY_FIX switch, as without it the cell phone is recognized but it went berserk when performing low-level functions on it (a fdisk -l /dev/uba for example). lsusb -v output follows: Bus 004 Device 004: ID 0421:04bd Nokia Mobile Phones Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0421 Nokia Mobile Phones idProduct 0x04bd bcdDevice 6.03 iManufacturer 1 Nokia iProduct 2 Nokia 5200 iSerial 3 353930018354523 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered Signed-off-by: Paulo Afonso Graner Fessel <pfessel@gmail.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: extend unusual range for 067b:3507Oliver Neukum2009-01-071-1/+1
| | | | | | | | | | This device has been released in a new revision which is still buggy. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: another unusual_devs entry for another bad Argosy storage deviceNguyen Anh Quynh2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have another Argosy USB storage device, which has the same problem with the Argosy USB storage device already fixed in 2.6.27.7. But this device has another product ID (840:84), so this patch adds a new entry into unusual_devs to fix the mount problem. I enclose here two patches: one against 2.6.27.8, and another against the latest linus-git tree. The information about the Argosy device is like below: #lsusb -v -d 840:84 Bus 005 Device 005: ID 0840:0084 Argosy Research, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0840 Argosy Research, Inc. idProduct 0x0084 bcdDevice 0.01 iManufacturer 1 Generic iProduct 2 USB 2.0 Storage Device iSerial 3 8400000000002549 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Before the patch, dmesg returns a lot of information like below (my dmesg is overflown): .... [ 138.833390] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.877631] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.877643] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.921906] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.921923] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information .... After the fix, dmesg returns below information: .... usb 5-1: new high speed USB device using ehci_hcd and address 5 usb 5-1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 7:0:0:0: Direct-Access HTS54808 0M9AT00 MG4O PQ: 0 ANSI: 0 sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 7:0:0:0: [sdb] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg1 type 0 kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Cc: Kuniyasu Suzaki <k.suzaki@aist.go.jp> Signed-off-by: Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs.h additions for Pentax K10DDaniel Drake2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Jaak Ristioja reported problems with his Pentax K10D camera: https://bugs.gentoo.org/show_bug.cgi?id=250406 /proc/bus/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0a17 ProdID=006e Rev= 1.00 S: Manufacturer=PENTAX Corporation S: Product=K10D C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=100ms The number of reported sectors is off-by-one. Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: Kadianakis George <desnacked@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
* usb-storage: update unusual_devs entry for Nokia 5310Alan Stern2008-12-171-1/+1
| | | | | | | | | | | | | This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Robson Roberto Souza Peixoto <robsonpeixoto@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Unusual devs patch for Nokia 3500cOzan Sener2008-12-171-0/+7
| | | | | | | | | | | | | | | | | | T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener <themgzzy@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: unusual_devs.h: Nokia 3109c additionCSÉCSY László2008-12-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | 2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László <boobaa@frugalware.org> Cc: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: unusual_devs entry for Nikon D2HTobias Kunze Briseño2008-11-301-0/+7
| | | | | | | | | This patch adds an unusual_devs entry for the Nikon D2H camera. From: Tobias Kunze Briseño <t@fictive.com>, Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: unusual_devs entry for Mio C520-GPSAlan Stern2008-11-301-0/+12
| | | | | | | | | | | | | This patch (as1176) adds an unusual_devs entry for the Mio C520 GPS unit. Other devices also based on the Mitac hardware use the same USB interface firmware, so the Vendor and Product names are generalized. This fixes Bugzilla #11583. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Tamas Kerecsen <kerecsen@bigfoot.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: update unusual_devs entries for Nokia 5300 and 5310Alan Stern2008-11-191-1/+8
| | | | | | | | | | | | | | This patch (as1168) updates the unusual_devs entry for the Nokia 5300. According to Jorge Lucangeli Obes <t4m5yn@gmail.com>, some existing models have a revision number lower than the lower limit of the current entry. The patch also moves the entry for the Nokia 5310 to its correct place in the file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: updates unusual_devs entry for the Nokia 6300Alan Stern2008-11-191-1/+1
| | | | | | | | | | | | This patch (as1169) modifies the unusual_devs entry for the Nokia 6300. According to Maciej Gierok <mgierok@gmail.com> and David McBride <dwm@doc.ic.ac.uk>, the revision limits need to be wider. This fixes Bugzilla #11768. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: unusual devs patch for Nokia 7610 SupernovaRicky Wong2008-11-131-0/+8
| | | | | | | | | Additional sectors were reported by the Nokia 7610 Supernova phone in usb storage mode. The following patch rectifies the aforementioned problem. Signed-off-by: Ricky Wong Yung Fei <evilbladewarrior@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: adjust comment in KconfigPaul Bolle2008-11-131-2/+2
| | | | | | | | | | | Since commit 65934a9 ("Make USB storage depend on SCSI rather than selecting it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is incorrect. Adjust it to the current situation. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs entry for Argosy USB mass-storage interfaceAlan Stern2008-11-131-0/+7
| | | | | | | | | | | This patch (as1162) adds an unusual_devs entry for Argosy's USB-IDE interface. This fixes Bugzilla #11843. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Luciano Rocha <luciano@eurotux.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add Nikon D300 camera to unusual_devsPaul Ready2008-11-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11685 When A Nikon D300 camera is connected to a system it is seen in /proc/bus/pci/devices but is not accessible. This is seen in the above file: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=041a Rev= 1.03 S: Manufacturer=NIKON S: Product=NIKON DSC D300 S: SerialNumber=000008014379 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=usbfs E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Unusual dev for the "Kyocera / Contax SL300R T*" digital camera.Jens Taprogge2008-10-291-0/+7
| | | | | | | | | | | | The camera reports an incorrect size and fails to handle PREVENT-ALLOW MEDIUM REMOVAL commands. The patch marks the camera as an unusual dev and adds the flags to enable the workarounds for both shortcomings. Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Unusual dev for Mio moov 330 gpsFrédéric Marchal2008-10-221-0/+9
| | | | | | | | | | | | Here is an entry for the unusual_devs.h file to handle a Mio Moov 330 GPS that stops responding when it is requested to transfer more than 64KB. The patch is taken against kernel-2.6.27-git3. Signed-off-by: Frédéric Marchal <frederic.marchal@wowcompany.co Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: support Huawei data card product IDsfangxiaozhi2008-10-222-21/+255
| | | | | | | | | | | | | | | | | | | | In this patch, we want to do one thing: add more Huawei product IDs into the USB driver. Then it can support more Huawei data card devices. So to declare the unusual device for new Huawei data card devices in unusual_devs.h and to declare more new product IDs in option.c. To modify the data value and length in the function of usb_stor_huawei_e220_init in initializers.c That's because based on the USB standard, while sending SET_FETURE_D to the device, it requires the corresponding data to be zero, and its sending length also must be zero. In our old solution, it can be compatible with our WCDMA data card devices, but can not support our CDMA data card devices. But in this new solution, it can be compatible with all of our data card devices. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA ↵Phil Dibowitz2008-10-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bridge Here's the patch that implements the fix you suggested to avoid the I/O errors that I was running into with my new USB enclosure with a JMicron USB/ATA bridge, while issuing scsi-io USN or other such queries used by Fedora's mkinitrd. http://bugzilla.kernel.org/show_bug.cgi?id=9638#c85 /proc/bus/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=152d ProdID=2329 Rev= 1.00 S: Manufacturer=JMicron S: Product=USB to ATA/ATAPI Bridge S: SerialNumber=DE5088854FFF C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms (patch applied and retested on a modified 2.6.27.2-libre.24.rc1.fc10) Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove err() macro from more usb driversGreg Kroah-Hartman2008-10-171-4/+5
| | | | | | | | | USB should not be having it's own printk macros, so remove err() and use the system-wide standard of dev_err() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: report underflow with no sense dataAlan Stern2008-10-171-1/+1
| | | | | | | | | | | | | | | | | | This patch (as1118) addresses a problem with certain USB mass-storage devices. These devices sometimes return less data than asked for and then provide no sense data to explain the problem. Currently usb-storage leaves it up to the SCSI layer to decide how this should be handled, and the SCSI layer interprets the lack of sense data to mean that nothing went wrong. But if we got less data than required then something definitely _did_ go wrong, and we should say so. The patch tells the SCSI layer to retry the command when this sort of thing happens. Retrying may not solve the underlying problem, but it's better than believing that data was transferred when it wasn't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: unusual devs patch for Nokia 5310 Music XpressDavid Almaroad2008-09-231-0/+7
| | | | | | | | | | | The Nokia 5310 Music Xpress phone reports one too many sectors in usb-storage mode. This patch resolves that. Signed-off-by: David Almaroad <dalmaroad@gmail.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs addition for RockChip MP3 playerAlan Stern2008-09-231-0/+7
| | | | | | | | | | This patch (as1136) adds an unusual_devs entry for a version of the RockChip MP3 player which can't handle the MODE SENSE command used for write-protect detection. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fixing Nokia 3310c in storage modeFilip Joelsson2008-09-231-0/+7
| | | | | | | | | | I had trouble connecting my cell phone as a storage device - so I added it to the unusual_devs.h list. I had trouble with the bcdDeviceMin and Max values - so after some experimenting I made it pretty inclusive. From: Filip Joelsson <filip@blueturtle.nu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix the Nokia 6300 storage-mode.Richard Nauber2008-09-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes that behavior: ... Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] ... cat /proc/bus/usb/devices ... T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=04fa Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 6300 S: SerialNumber=35XXXXXXXX C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... From: Richard Nauber <RichardNauber@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Storage: Sierra: Non-configurable TRU-InstallKevin Lloyd2008-09-234-18/+1
| | | | | | | | This patch alters the Sierra Mass Storage patch so that it is non-configurable. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: unusual_devs entry for Nokia 5300Alan Stern2008-08-131-0/+7
| | | | | | | | | | | This patch (as1120) adds an unusual_devs entry for the Nokia 5300. Maybe once Nokia releases the Symbian code we'll be able to fix all the problems it has with the USB mass-storage protocol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Cedric Godin <cedric@belbone.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage Motorola Phone Razr v3xx US_FL_FIX_CAPACITY patchJost Diederichs2008-08-131-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | add razr v3xx US_FL_FIX_CAPACITY flag to unusual_devs.h in usb-storage This is another Motorola phone that incorrectly reports the sector count (off by one). Problem Description: io errors when mounting phone's sd-card via the phones usb port Steps to reproduce: mount Motorola Razr v3xx phones sd-card on Linux Desktop via usb cable. Phones USB port must be in memory card mode. DEBUG output: Jul 9 19:32:41 micky kernel: Buffer I/O error on device sdd, logical block 3970048 Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Sense Key : Medium Error [current] Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Add. Sense: No additional sense information Jul 9 19:32:41 micky kernel: end_request: I/O error, dev sdd, sector 3970048 From: Jost Diederichs <jost@qdusa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Storage Sierra: TRU-Install feature updateKevin Lloyd2008-08-136-2/+231
| | | | | | | | | | | | | | | | | | | | | This patch upgrades the support for the Sierra Wireless TRU-Install feature (i.e. zeroCD) to allow for future support of Linux enabled TRU-Install devices. By default all devices that do not have a Linux enabled TRU-Install device (i.e. the device does not have a Linux package on the virtual CD partition) will be switched into "modem mode." Devices that do contain a Linux package in the TRU-Install virtual CD will be allowed to enumerate as a CD-Rom so that either (a) a user can install the packaged software or (b) a user-space application (e.g. udev) can switch it to modem mode. This patch does allow for manual override by adding a usb-storage module parameter 'swi_tru_install' which can force the modem into either mode regardless of what packages it contains. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: unusual_devs entries for iRiver T10 and Datafab CF+SM readerAlan Stern2008-08-131-0/+14
| | | | | | | | | | | | | | | This patch (as1115) adds unusual_devs entries with the IGNORE_RESIDE flag for the iRiver T10 and the Simple Tech/Datafab CF+SM card reader. Apparently these devices provide reasonable residue values for READ and WRITE operations, but not for others like INQUIRY or READ CAPACITY. This fixes the iRiver T10 problem reported in Bugzilla #11125. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 04:15:59 +0000