summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage
Commit message (Collapse)AuthorAgeFilesLines
* USB: UAS: use macro for reporting resultsOliver Neukum2020-09-161-6/+6
| | | | | | | | | The SCSI layer has introduced a new macro for recording the result of a command. Use it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200916094026.30085-3-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: UAS: fix disconnect by unplugging a hubOliver Neukum2020-09-161-2/+12
| | | | | | | | | | | | | | The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method. We need to specifically check for ENODEV. The issue goes back to the introduction of the driver. Fixes: 115bb1ffa54c3 ("USB: Add UAS driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200916094026.30085-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uas: bump hw_max_sectors to 2048 blocks for SS or faster drivesTom Yan2020-09-041-0/+2
| | | | | | | | | | There's no reason for uas to use a smaller value of max_sectors than usb-storage. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903181725.2931-3-tom.ty89@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uas: fix sdev->host->dma_devTom Yan2020-09-041-6/+11
| | | | | | | | | | | | | | | | Use scsi_add_host_with_dma() instead of scsi_add_host(). When the scsi request queue is initialized/allocated, hw_max_sectors is clamped to the dma max mapping size. Therefore, the correct device that should be used for the clamping needs to be set. The same clamping is still needed in uas as hw_max_sectors could be changed there. The original clamping would be invalidated in such cases. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903181725.2931-2-tom.ty89@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: fix sdev->host->dma_devTom Yan2020-09-042-3/+4
| | | | | | | | | | | | | | | | Use scsi_add_host_with_dma() instead of scsi_add_host(). When the scsi request queue is initialized/allocated, hw_max_sectors is clamped to the dma max mapping size. Therefore, the correct device that should be used for the clamping needs to be set. The same clamping is still needed in usb-storage as hw_max_sectors could be changed there. The original clamping would be invalidated in such cases. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903181725.2931-1-tom.ty89@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 5.9-rc3 into usb-nextGreg Kroah-Hartman2020-08-314-3/+17
|\ | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'usb-5.9-rc3' of ↵Linus Torvalds2020-08-302-1/+15
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Let's try this again... Here are some USB fixes for 5.9-rc3. This differs from the previous pull request for this release in that the usb gadget patch now does not break some systems, and actually does what it was intended to do. Many thanks to Marek Szyprowski for quickly noticing and testing the patch from Andy Shevchenko to resolve this issue. Additionally, some more new USB quirks have been added to get some new devices to work properly based on user reports. Other than that, the patches are all here, and they contain: - usb gadget driver fixes - xhci driver fixes - typec fixes - new quirks and ids - fixes for USB patches that went into 5.9-rc1. All of these have been tested in linux-next with no reported issues" * tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: storage: Add unusual_uas entry for Sony PSZ drives USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe() USB: gadget: u_f: Unbreak offset calculation in VLAs USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures USB: PHY: JZ4770: Fix static checker warning. USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb() USB: gadget: u_f: add overflow checks to VLA macros xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed xhci: Do warm-reset when both CAS and XDEV_RESUME are set usb: host: xhci: fix ep context print mismatch in debugfs usb: uas: Add quirk for PNY Pro Elite tools: usb: move to tools buildsystem USB: Fix device driver race USB: Also match device drivers using the ->match vfunc usb: host: xhci-tegra: fix tegra_xusb_get_phy() usb: host: xhci-tegra: otg usb2/usb3 port init usb: hcd: Fix use after free in usb_hcd_pci_remove() usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port() ...
| | * usb: storage: Add unusual_uas entry for Sony PSZ drivesAlan Stern2020-08-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PSZ-HA* family of USB disk drives from Sony can't handle the REPORT OPCODES command when using the UAS protocol. This patch adds an appropriate quirks entry. Reported-and-tested-by: Till Dörges <doerges@pre-sense.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * USB: Ignore UAS for JMicron JMS567 ATA/ATAPI BridgeCyril Roelandt2020-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * usb: uas: Add quirk for PNY Pro EliteThinh Nguyen2020-08-191-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PNY Pro Elite USB 3.1 Gen 2 device (SSD) doesn't respond to ATA_12 pass-through command (i.e. it just hangs). If it doesn't support this command, it should respond properly to the host. Let's just add a quirk to be able to move forward with other operations. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Link: https://lore.kernel.org/r/2b0585228b003eedcc82db84697b31477df152e0.1597803605.git.thinhn@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-08-232-2/+2
| |/ | | | | | | | | | | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* / USB: storage: isd200: fix spelling mistake "removeable" -> "removable"Colin Ian King2020-08-181-1/+1
|/ | | | | | | | | There is a spelling mistake in a usb_stor_dbg debug message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200810083211.48282-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-5.9-rc1' of ↵Linus Torvalds2020-08-056-7/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt patches for 5.9-rc1. Nothing really magic/major in here, just lots of little changes and updates: - clean up language usages in USB core and some drivers - Thunderbolt driver updates and additions - USB Gadget driver updates - dwc3 driver updates (like always...) - build with "W=1" warning fixups - mtu3 driver updates - usb-serial driver updates and device ids - typec additions and updates for new hardware - xhci debug code updates for future platforms - cdns3 driver updates - lots of other minor driver updates and fixes and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits) usb: common: usb-conn-gpio: Register charger usb: mtu3: simplify mtu3_req_complete() usb: mtu3: clear dual mode of u3port when disable device usb: mtu3: use MTU3_EP_WEDGE flag usb: mtu3: remove useless member @busy in mtu3_ep struct usb: mtu3: remove repeated error log usb: mtu3: add ->udc_set_speed() usb: mtu3: introduce a funtion to check maximum speed usb: mtu3: clear interrupts status when disable interrupts usb: mtu3: reinitialize CSR registers usb: mtu3: fix macro for maximum number of packets usb: mtu3: remove unnecessary pointer checks usb: xhci: Fix ASMedia ASM1142 DMA addressing usb: xhci: define IDs for various ASMedia host controllers usb: musb: convert to devm_platform_ioremap_resource_byname usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname usb: dwc3: convert to devm_platform_ioremap_resource_byname usb: cdns3: convert to devm_platform_ioremap_resource_byname usb: phy: am335x: convert to devm_platform_ioremap_resource_byname ...
| * USB: storage: replace HTTP links with HTTPS onesAlexander A. Klimov2020-07-093-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200708184903.17350-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: storage: alauda: Remove set but unchecked variableLee Jones2020-07-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value of alauda_get_media_status() hasn't been checked since the driver's inception back in 2005. If nothing have gone wrong/been detected until this point, it's probably safe to just remove the variable. Fixes the following W=1 kernel build warning(s): drivers/usb/storage/alauda.c: In function ‘alauda_check_media’: drivers/usb/storage/alauda.c:456:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] 456 | int rc; | ^~ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Daniel Drake <dsd@gentoo.org> Cc: usb-storage@lists.one-eyed-alien.net Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-20-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: storage: scsi: fix up comment to be more specificGreg Kroah-Hartman2020-06-191-1/+1
| | | | | | | | | | | | | | | | | | Fix up the wording in a comment for the scsi driver saying what it does using better terminology. Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200618094300.1887727-8-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: storage: fix wording in error messageGreg Kroah-Hartman2020-06-191-1/+1
| | | | | | | | | | | | | | | | | | Make it obvious that the UAS driver is being ignored for a specific device by fixing up the wording to be more clear. Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200618094300.1887727-7-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | treewide: Remove uninitialized_var() usageKees Cook2020-07-161-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
* treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2020-06-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* sierra-ms: do not call scsi_get_host_dev()Hannes Reinecke2020-05-131-4/+0
| | | | | | | | | | | | | | | | scsi_get_host_dev() will create a virtual device such that either the target id is ignored from scanning (if 'this_id' is set to something which can be reached during scanning) or if the driver needs a scsi device for the HBA to send commands to. Neither is true for sierra-ms; 'this_id' remains at the default value '-1' and the created device is never ever used within the driver. So kill it. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200505143019.57418-1-hare@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 5.7-rc5 into usb-nextGreg Kroah-Hartman2020-05-111-0/+7
|\ | | | | | | | | | | We want the USB fixes in here too. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: uas: add quirk for LaCie 2Big QuadraOliver Neukum2020-04-301-0/+7
| | | | | | | | | | | | | | | | | | | | | | This device needs US_FL_NO_REPORT_OPCODES to avoid going through prolonged error handling on enumeration. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Julian Groß <julian.g@posteo.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200429155218.7308-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 5.7-rc3 into usb-nextGreg Kroah-Hartman2020-04-272-3/+50
|\| | | | | | | | | | | We need the USB fixes in here too. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb-storage: Add unusual_devs entry for JMicron JMS566Alan Stern2020-04-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails to handle WRITE commands with the FUA bit set, even though it claims to support FUA. (Oddly enough, a later version of the same bridge, version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also oddly, the bridge _does_ support FUA when using the UAS transport instead of the Bulk-Only transport -- but this device was blacklisted for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") for apparently unrelated reasons.) This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA flag. This allows the bridge to work properly with usb-storage. Reported-and-tested-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221613110.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * UAS: fix deadlock in error handling and PM flushing workOliver Neukum2020-04-161-3/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A SCSI error handler and block runtime PM must not allocate memory with GFP_KERNEL. Furthermore they must not wait for tasks allocating memory with GFP_KERNEL. That means that they cannot share a workqueue with arbitrary tasks. Fix this for UAS using a private workqueue. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: f9dc024a2da1f ("uas: pre_reset and suspend: Fix a few races") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200415141750.811-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * UAS: no use logging any details in case of ENODEVOliver Neukum2020-04-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | Once a device is gone, the internal state does not matter anymore. There is no need to spam the logs. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Fixes: 326349f824619 ("uas: add dead request list") Link: https://lore.kernel.org/r/20200415141750.811-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: Storage: Use the correct style for SPDX License IdentifierNishad Kamdar2020-04-2321-21/+21
|/ | | | | | | | | | | | | | | | This patch corrects the SPDX License Identifier style in header files related to USB Storage driver configuration. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Link: https://lore.kernel.org/r/20200419131653.GA6611@nishad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 5.6-rc5 into usb-nextGreg Kroah-Hartman2020-03-101-0/+6
|\ | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: storage: Add quirk for Samsung Fit flashJim Lin2020-03-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors, e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors If data access times out, driver error handling will issue a port reset. Sometimes Samsung Fit (090C:1000) flash disk will not respond to later Set Address or Get Descriptor command. Adding this quirk to limit max_sectors to 64 sectors to avoid issue occurring. Signed-off-by: Jim Lin <jilin@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1583158895-31342-1-git-send-email-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 5.6-rc3 into usb-nextGreg Kroah-Hartman2020-02-241-1/+22
|\| | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: uas: fix a plug & unplug racingEJ Hsu2020-02-101-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk. There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run. In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened. In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread. Signed-off-by: EJ Hsu <ejh@nvidia.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb-storage: Use const to reduce object data sizeJoe Perches2020-02-193-10/+11
|/ | | | | | | | | | | | | | | | | | | | | Make structs const to reduce data size ~20KB. Change function arguments and prototypes as necessary to compile. $ size (x86-64 defconfig pre) text data bss dec hex filename 12281 10948 480 23709 5c9d ./drivers/usb/storage/usb.o 111 10528 8 10647 2997 ./drivers/usb/storage/usual-tables.o $ size (x86-64 defconfig post) text data bss dec hex filename 22809 420 480 23709 5c9d drivers/usb/storage/usb.o 10551 0 0 10551 2937 drivers/usb/storage/usual-tables.o Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/cf13bd2d790ae3afbf5da55ea7bed12e00c5119d.camel@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Fix incorrect DMA allocations for local memory pool driversFredrik Noring2019-12-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix commit 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") where local memory USB drivers erroneously allocate DMA memory instead of pool memory, causing OHCI Unrecoverable Error, disabled HC died; cleaning up The order between hcd_uses_dma() and hcd->localmem_pool is now arranged as in hcd_buffer_alloc() and hcd_buffer_free(), with the test for hcd->localmem_pool placed first. As an alternative, one might consider adjusting hcd_uses_dma() with static inline bool hcd_uses_dma(struct usb_hcd *hcd) { - return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA); + return IS_ENABLED(CONFIG_HAS_DMA) && + (hcd->driver->flags & HCD_DMA) && + (hcd->localmem_pool == NULL); } One can also consider unsetting HCD_DMA for local memory pool drivers. Fixes: 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Link: https://lore.kernel.org/r/20191210172905.GA52526@sx9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2019-12-023-4/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits) scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() scsi: target: core: Fix a pr_debug() argument scsi: iscsi: Don't send data to unbound connection scsi: target: iscsi: Wait for all commands to finish before freeing a session scsi: target: core: Release SPC-2 reservations when closing a session scsi: target: core: Document target_cmd_size_check() scsi: bnx2i: fix potential use after free Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails" scsi: NCR5380: Add disconnect_mask module parameter scsi: NCR5380: Unconditionally clear ICR after do_abort() scsi: NCR5380: Call scsi_set_resid() on command completion scsi: scsi_debug: num_tgts must be >= 0 scsi: lpfc: use hdwq assigned cpu for allocation scsi: arcmsr: fix indentation issues scsi: qla4xxx: fix double free bug scsi: pm80xx: Modified the logic to collect fatal dump scsi: pm80xx: Tie the interrupt name to the module instance scsi: pm80xx: Controller fatal error through sysfs scsi: pm80xx: Do not request 12G sas speeds scsi: pm80xx: Cleanup command when a reset times out ...
| * scsi: core: Clean up SG_NONEFinn Thain2019-11-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove SG_NONE and a related misleading comment. Update documentation. This patch does not affect behaviour as zero initialization is redundant. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: usb-storage@lists.one-eyed-alien.net Link: https://lore.kernel.org/r/b4779b7a6563f6bd8d259ee457871c1c463c420e.1572656814.git.fthain@telegraphics.com.au Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: core: Fix scsi_get/set_resid() interfaceDamien Le Moal2019-11-082-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct scsi_cmnd cmd->req.resid_len which is returned and set respectively by the helper functions scsi_get_resid() and scsi_set_resid() is an unsigned int. Reflect this fact in the interface of these helper functions. Also fix compilation errors due to min() and max() type mismatch introduced by this change in scsi debug code, usb transport code and in the USB ENE card reader driver. Link: https://lore.kernel.org/r/20191030090847.25650-1-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | usb-storage: Disable UAS on JMicron SATA enclosureLaura Abbott2019-11-181-2/+5
| | | | | | | | | | | | | | | | | | | | | | Steve Ellis reported incorrect block sizes and alignement offsets with a SATA enclosure. Adding a quirk to disable UAS fixes the problems. Reported-by: Steven Ellis <sellis@redhat.com> Cc: Pacho Ramos <pachoramos@gmail.com> Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: uas: heed CAPACITY_HEURISTICSOliver Neukum2019-11-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | There is no need to ignore this flag. We should be as close to storage in that regard as makes sense, so honor flags whose cost is tiny. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114112758.32747-3-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: uas: honor flag to avoid CAPACITY16Oliver Neukum2019-11-181-0/+4
| | | | | | | | | | | | | | | | | | Copy the support over from usb-storage to get feature parity Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114112758.32747-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 5.4-rc6 into usb-nextGreg Kroah-Hartman2019-11-042-30/+0
|\ \ | | | | | | | | | | | | | | | We need the USB fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather ↵Alan Stern2019-10-281-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | segments") Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42090f. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Acked-by: Christoph Hellwig <hch@lst.de> Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb-storage: Revert commit 747668dbc061 ("usb-storage: Set ↵Alan Stern2019-10-281-10/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virt_boundary_mask to avoid SG overflows") Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that this interacts badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting for usb-storage. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to fix the swiotlb problem, this patch reverts commit 747668dbc061. Reported-and-tested-by: Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Seth Bollinger <Seth.Bollinger@digi.com> CC: <stable@vger.kernel.org> Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") Acked-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / usb-storage: SCSI glue: use dev_err instead of printkMatthias Maennich2019-10-021-2/+2
|/ | | | | | | | | | | | Follow common practice and retire printk(KERN_ERR ...) in favor of dev_err(). Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: usb-storage@lists.one-eyed-alien.net Signed-off-by: Matthias Maennich <maennich@google.com> Link: https://lore.kernel.org/r/20191002110312.75749-1-maennich@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'modules-for-v5.4' of ↵Linus Torvalds2019-09-2215-0/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "The main bulk of this pull request introduces a new exported symbol namespaces feature. The number of exported symbols is increasingly growing with each release (we're at about 31k exports as of 5.3-rc7) and we currently have no way of visualizing how these symbols are "clustered" or making sense of this huge export surface. Namespacing exported symbols allows kernel developers to more explicitly partition and categorize exported symbols, as well as more easily limiting the availability of namespaced symbols to other parts of the kernel. For starters, we have introduced the USB_STORAGE namespace to demonstrate the API's usage. I have briefly summarized the feature and its main motivations in the tag below. Summary: - Introduce exported symbol namespaces. This new feature allows subsystem maintainers to partition and categorize their exported symbols into explicit namespaces. Module authors are now required to import the namespaces they need. Some of the main motivations of this feature include: allowing kernel developers to better manage the export surface, allow subsystem maintainers to explicitly state that usage of some exported symbols should only be limited to certain users (think: inter-module or inter-driver symbols, debugging symbols, etc), as well as more easily limiting the availability of namespaced symbols to other parts of the kernel. With the module import requirement, it is also easier to spot the misuse of exported symbols during patch review. Two new macros are introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in Documentation/kbuild/namespaces.rst. - Some small code and kbuild cleanups here and there" * tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Remove leftover '#undef' from export header module: remove unneeded casts in cmp_name() module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES module: remove redundant 'depends on MODULES' module: Fix link failure due to invalid relocation on namespace offset usb-storage: export symbols in USB_STORAGE namespace usb-storage: remove single-use define for debugging docs: Add documentation for Symbol Namespaces scripts: Coccinelle script for namespace dependencies. modpost: add support for generating namespace dependencies export: allow definition default namespaces in Makefiles or sources module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS modpost: add support for symbol namespaces module: add support for symbol namespaces. export: explicitly align struct kernel_symbol module: support reading multiple values per modinfo tag
| * usb-storage: export symbols in USB_STORAGE namespaceMatthias Maennich2019-09-1015-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules using these symbols are required to explicitly import the namespace. This patch was generated with the following steps and serves as a reference to use the symbol namespace feature: 1) Define DEFAULT_SYMBOL_NAMESPACE in the corresponding Makefile 2) make (see warnings during modpost about missing imports) 3) make nsdeps Instead of a DEFAULT_SYMBOL_NAMESPACE definition, the EXPORT_SYMBOL_NS variants can be used to explicitly specify the namespace. The advantage of the method used here is that newly added symbols are automatically exported and existing ones are exported without touching their respective EXPORT_SYMBOL macro expansion. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
| * usb-storage: remove single-use define for debuggingMatthias Maennich2019-09-102-3/+1
| | | | | | | | | | | | | | | | | | | | | | USB_STORAGE was defined as "usb-storage: " and used in a single location as argument to printk. In order to be able to use the name 'USB_STORAGE', drop the definition and use the string directly for the printk call. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
* | usb-storage: use hcd_uses_dma to check for DMA capabilitiesChristoph Hellwig2019-09-031-3/+3
| | | | | | | | | | | | | | | | | | The dma_mask on its own doesn't mean much. Instead check for the actual flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190903084615.19161-4-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 5.3-rc7 into usb-nextGreg Kroah-Hartman2019-09-022-7/+10
|\| | | | | | | | | | | We need the usb fixes in here for testing Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: storage: ums-realtek: Whitelist auto-delink supportKai-Heng Feng2019-08-281-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Auto-delink requires writing special registers to ums-realtek devices. Unconditionally enable auto-delink may break newer devices. So only enable auto-delink by default for the original three IDs, 0x0138, 0x0158 and 0x0159. Realtek is working on a patch to properly support auto-delink for other IDs. BugLink: https://bugs.launchpad.net/bugs/1838886 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: storage: ums-realtek: Update module parameter description for ↵Kai-Heng Feng2019-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | auto_delink_en The option named "auto_delink_en" is a bit misleading, as setting it to false doesn't really disable auto-delink but let auto-delink be firmware controlled. Update the description to reflect the real usage of this parameter. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190827173450.13572-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 01:05:12 +0000