summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage
Commit message (Collapse)AuthorAgeFilesLines
* usb-storage: update unusual_devs entry for Nokia 5310Alan Stern2008-12-171-1/+1
| | | | | | | | | | | | | This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Robson Roberto Souza Peixoto <robsonpeixoto@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Unusual devs patch for Nokia 3500cOzan Sener2008-12-171-0/+7
| | | | | | | | | | | | | | | | | | T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener <themgzzy@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: unusual_devs.h: Nokia 3109c additionCSÉCSY László2008-12-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | 2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László <boobaa@frugalware.org> Cc: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: unusual_devs entry for Nikon D2HTobias Kunze Briseño2008-11-301-0/+7
| | | | | | | | | This patch adds an unusual_devs entry for the Nikon D2H camera. From: Tobias Kunze Briseño <t@fictive.com>, Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: unusual_devs entry for Mio C520-GPSAlan Stern2008-11-301-0/+12
| | | | | | | | | | | | | This patch (as1176) adds an unusual_devs entry for the Mio C520 GPS unit. Other devices also based on the Mitac hardware use the same USB interface firmware, so the Vendor and Product names are generalized. This fixes Bugzilla #11583. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Tamas Kerecsen <kerecsen@bigfoot.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: update unusual_devs entries for Nokia 5300 and 5310Alan Stern2008-11-191-1/+8
| | | | | | | | | | | | | | This patch (as1168) updates the unusual_devs entry for the Nokia 5300. According to Jorge Lucangeli Obes <t4m5yn@gmail.com>, some existing models have a revision number lower than the lower limit of the current entry. The patch also moves the entry for the Nokia 5310 to its correct place in the file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: updates unusual_devs entry for the Nokia 6300Alan Stern2008-11-191-1/+1
| | | | | | | | | | | | This patch (as1169) modifies the unusual_devs entry for the Nokia 6300. According to Maciej Gierok <mgierok@gmail.com> and David McBride <dwm@doc.ic.ac.uk>, the revision limits need to be wider. This fixes Bugzilla #11768. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: unusual devs patch for Nokia 7610 SupernovaRicky Wong2008-11-131-0/+8
| | | | | | | | | Additional sectors were reported by the Nokia 7610 Supernova phone in usb storage mode. The following patch rectifies the aforementioned problem. Signed-off-by: Ricky Wong Yung Fei <evilbladewarrior@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: adjust comment in KconfigPaul Bolle2008-11-131-2/+2
| | | | | | | | | | | Since commit 65934a9 ("Make USB storage depend on SCSI rather than selecting it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is incorrect. Adjust it to the current situation. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs entry for Argosy USB mass-storage interfaceAlan Stern2008-11-131-0/+7
| | | | | | | | | | | This patch (as1162) adds an unusual_devs entry for Argosy's USB-IDE interface. This fixes Bugzilla #11843. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Luciano Rocha <luciano@eurotux.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add Nikon D300 camera to unusual_devsPaul Ready2008-11-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11685 When A Nikon D300 camera is connected to a system it is seen in /proc/bus/pci/devices but is not accessible. This is seen in the above file: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=041a Rev= 1.03 S: Manufacturer=NIKON S: Product=NIKON DSC D300 S: SerialNumber=000008014379 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=usbfs E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Unusual dev for the "Kyocera / Contax SL300R T*" digital camera.Jens Taprogge2008-10-291-0/+7
| | | | | | | | | | | | The camera reports an incorrect size and fails to handle PREVENT-ALLOW MEDIUM REMOVAL commands. The patch marks the camera as an unusual dev and adds the flags to enable the workarounds for both shortcomings. Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Unusual dev for Mio moov 330 gpsFrédéric Marchal2008-10-221-0/+9
| | | | | | | | | | | | Here is an entry for the unusual_devs.h file to handle a Mio Moov 330 GPS that stops responding when it is requested to transfer more than 64KB. The patch is taken against kernel-2.6.27-git3. Signed-off-by: Frédéric Marchal <frederic.marchal@wowcompany.co Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: support Huawei data card product IDsfangxiaozhi2008-10-222-21/+255
| | | | | | | | | | | | | | | | | | | | In this patch, we want to do one thing: add more Huawei product IDs into the USB driver. Then it can support more Huawei data card devices. So to declare the unusual device for new Huawei data card devices in unusual_devs.h and to declare more new product IDs in option.c. To modify the data value and length in the function of usb_stor_huawei_e220_init in initializers.c That's because based on the USB standard, while sending SET_FETURE_D to the device, it requires the corresponding data to be zero, and its sending length also must be zero. In our old solution, it can be compatible with our WCDMA data card devices, but can not support our CDMA data card devices. But in this new solution, it can be compatible with all of our data card devices. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA ↵Phil Dibowitz2008-10-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bridge Here's the patch that implements the fix you suggested to avoid the I/O errors that I was running into with my new USB enclosure with a JMicron USB/ATA bridge, while issuing scsi-io USN or other such queries used by Fedora's mkinitrd. http://bugzilla.kernel.org/show_bug.cgi?id=9638#c85 /proc/bus/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=152d ProdID=2329 Rev= 1.00 S: Manufacturer=JMicron S: Product=USB to ATA/ATAPI Bridge S: SerialNumber=DE5088854FFF C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms (patch applied and retested on a modified 2.6.27.2-libre.24.rc1.fc10) Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove err() macro from more usb driversGreg Kroah-Hartman2008-10-171-4/+5
| | | | | | | | | USB should not be having it's own printk macros, so remove err() and use the system-wide standard of dev_err() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: report underflow with no sense dataAlan Stern2008-10-171-1/+1
| | | | | | | | | | | | | | | | | | This patch (as1118) addresses a problem with certain USB mass-storage devices. These devices sometimes return less data than asked for and then provide no sense data to explain the problem. Currently usb-storage leaves it up to the SCSI layer to decide how this should be handled, and the SCSI layer interprets the lack of sense data to mean that nothing went wrong. But if we got less data than required then something definitely _did_ go wrong, and we should say so. The patch tells the SCSI layer to retry the command when this sort of thing happens. Retrying may not solve the underlying problem, but it's better than believing that data was transferred when it wasn't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: unusual devs patch for Nokia 5310 Music XpressDavid Almaroad2008-09-231-0/+7
| | | | | | | | | | | The Nokia 5310 Music Xpress phone reports one too many sectors in usb-storage mode. This patch resolves that. Signed-off-by: David Almaroad <dalmaroad@gmail.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs addition for RockChip MP3 playerAlan Stern2008-09-231-0/+7
| | | | | | | | | | This patch (as1136) adds an unusual_devs entry for a version of the RockChip MP3 player which can't handle the MODE SENSE command used for write-protect detection. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fixing Nokia 3310c in storage modeFilip Joelsson2008-09-231-0/+7
| | | | | | | | | | I had trouble connecting my cell phone as a storage device - so I added it to the unusual_devs.h list. I had trouble with the bcdDeviceMin and Max values - so after some experimenting I made it pretty inclusive. From: Filip Joelsson <filip@blueturtle.nu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix the Nokia 6300 storage-mode.Richard Nauber2008-09-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes that behavior: ... Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] ... cat /proc/bus/usb/devices ... T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=04fa Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 6300 S: SerialNumber=35XXXXXXXX C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... From: Richard Nauber <RichardNauber@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Storage: Sierra: Non-configurable TRU-InstallKevin Lloyd2008-09-234-18/+1
| | | | | | | | This patch alters the Sierra Mass Storage patch so that it is non-configurable. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: unusual_devs entry for Nokia 5300Alan Stern2008-08-131-0/+7
| | | | | | | | | | | This patch (as1120) adds an unusual_devs entry for the Nokia 5300. Maybe once Nokia releases the Symbian code we'll be able to fix all the problems it has with the USB mass-storage protocol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Cedric Godin <cedric@belbone.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage Motorola Phone Razr v3xx US_FL_FIX_CAPACITY patchJost Diederichs2008-08-131-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | add razr v3xx US_FL_FIX_CAPACITY flag to unusual_devs.h in usb-storage This is another Motorola phone that incorrectly reports the sector count (off by one). Problem Description: io errors when mounting phone's sd-card via the phones usb port Steps to reproduce: mount Motorola Razr v3xx phones sd-card on Linux Desktop via usb cable. Phones USB port must be in memory card mode. DEBUG output: Jul 9 19:32:41 micky kernel: Buffer I/O error on device sdd, logical block 3970048 Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Sense Key : Medium Error [current] Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Add. Sense: No additional sense information Jul 9 19:32:41 micky kernel: end_request: I/O error, dev sdd, sector 3970048 From: Jost Diederichs <jost@qdusa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Storage Sierra: TRU-Install feature updateKevin Lloyd2008-08-136-2/+231
| | | | | | | | | | | | | | | | | | | | | This patch upgrades the support for the Sierra Wireless TRU-Install feature (i.e. zeroCD) to allow for future support of Linux enabled TRU-Install devices. By default all devices that do not have a Linux enabled TRU-Install device (i.e. the device does not have a Linux package on the virtual CD partition) will be switched into "modem mode." Devices that do contain a Linux package in the TRU-Install virtual CD will be allowed to enumerate as a CD-Rom so that either (a) a user can install the packaged software or (b) a user-space application (e.g. udev) can switch it to modem mode. This patch does allow for manual override by adding a usb-storage module parameter 'swi_tru_install' which can force the modem into either mode regardless of what packages it contains. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: unusual_devs entries for iRiver T10 and Datafab CF+SM readerAlan Stern2008-08-131-0/+14
| | | | | | | | | | | | | | | This patch (as1115) adds unusual_devs entries with the IGNORE_RESIDE flag for the iRiver T10 and the Simple Tech/Datafab CF+SM card reader. Apparently these devices provide reasonable residue values for READ and WRITE operations, but not for others like INQUIRY or READ CAPACITY. This fixes the iRiver T10 problem reported in Bugzilla #11125. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: automatically recognize bad residuesAlan Stern2008-08-131-2/+15
| | | | | | | | | | | | | | | | This patch (as1119) will help to reduce the clutter of usb-storage's unusual_devs file by automatically detecting some devices that need the IGNORE_RESIDUE flag. The idea is that devices should never return a non-zero residue for an INQUIRY or a READ CAPACITY command unless they failed to transfer all the requested data. So if one of these commands transfers a standard amount of data but there is a positive residue, we know that the residue is bogus and we can set the flag. This fixes the problems reported in Bugzilla #11125. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: quirk around v1.11 firmware on Nikon D4Dave Jones2008-08-131-2/+2
| | | | | | | | | | | | | | | | | | usb-storage: quirk around v1.11 firmware on Nikon D40 https://bugzilla.redhat.com/show_bug.cgi?id=454028 Just as in earlier firmware versions, we need to perform this quirk for the latest version too. Speculatively do the entry for the D80 too, as they seem to have the same firmware problems historically. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* remove unnecessary <linux/hdreg.h> includesBartlomiej Zolnierkiewicz2008-08-051-2/+0
| | | | | | | | | | | | | | | Following files don't need <linux/hdreg.h> at all: - arch/mips/jazz/setup.c - arch/sh/boards/mach-systemh/irq.c - drivers/macintosh/mediabay.c - drivers/scsi/hptiop.c - drivers/usb/storage/freecom.c - arch/powerpc/include/asm/ide.h - init/main.c Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* usb-storage: revert DMA-alignment change for Wireless USBAlan Stern2008-07-211-10/+15
| | | | | | | | | | | | | | | | | | | | | | This patch (as1110) reverts an earlier patch meant to help with Wireless USB host controllers. These controllers can have bulk maxpacket values larger than 512, which puts unusual constraints on the sizes of scatter-gather list elements. However it turns out that the block layer does not provide the support we need to enforce these constraints; merely changing the DMA alignment mask doesn't help. Hence there's no reason to keep the original patch. The Wireless USB problem will have to be solved a different way. In addition, there is a reason to get rid of the earlier patch. By dereferencing a pointer stored in the ep_in array of struct usb_device, the current code risks an invalid memory access when it runs concurrently with device removal. The members of that array are cleared before the driver's disconnect method is called, so it should not try to use them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix usb_reset_device and usb_reset_composite_device(take 3)Ming Lei2008-07-211-2/+2
| | | | | | | | | | | | | | | | | | | | This patch renames the existing usb_reset_device in hub.c to usb_reset_and_verify_device and renames the existing usb_reset_composite_device to usb_reset_device. Also the new usb_reset_and_verify_device does't need to be EXPORTED . The idea of the patch is that external interface driver should warn the other interfaces' driver of the same device before and after reseting the usb device. One interface driver shoud call _old_ usb_reset_composite_device instead of _old_ usb_reset_device since it can't assume the device contains only one interface. The _old_ usb_reset_composite_device is safe for single interface device also. we rename the two functions to make the change easily. This patch is under guideline from Alan Stern. Signed-off-by: Ming Lei <tom.leiming@gmail.com>
* USB: remove interface parameter of usb_reset_composite_deviceMing Lei2008-07-211-2/+1
| | | | | | | | | | | | | From the current implementation of usb_reset_composite_device function, the iface parameter is no longer useful. This function doesn't do something special for the iface usb_interface,compared with other interfaces in the usb_device. So remove the parameter and fix the related caller. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove CVS keywordsAdrian Bunk2008-07-2126-51/+0
| | | | | | | | | This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: implement "soft" unbindingAlan Stern2008-07-213-52/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1092) implements "soft" unbinding for usb-storage. When the disconnect routine is called, all commands and reset delays are allowed to complete normally until after scsi_remove_host() returns. This means that the commands needed for an orderly shutdown will be sent through to the device. Unlike before, the driver will now execute every command that it accepts. Hence there's no need for special code to catch unexecuted commands and fail them. The new sequence of events when disconnect runs goes as follows: If the device is truly unplugged, set the DISCONNECTING flag so we won't try to access it any more. If the SCSI-scanning thread hasn't started up yet, prevent it from doing anything by setting the new DONT_SCAN flag. Then wake it up and wait for it to terminate. Remove the SCSI host. This unbinds the upper-level drivers, doing an orderly shutdown. Commands sent to quiesce the device will be transmitted normally, unless the device is unplugged. Set the DISCONNECTING flag so that we won't accept any new commands that might get submitted (there aren't supposed to be any) and we won't try to access the device for resets. Tell the control thread to exit by waking it up with no pending command, and wait for it to terminate. Go on to do all the other normal stuff: releasing resources, freeing memory, and so on. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: change remaining semaphore to completionAlan Stern2008-07-213-6/+6
| | | | | | | | | | This patch (as1090) converts the one remaining semaphore in usb-storage into a completion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: separate dynamic flags from fixed flagsAlan Stern2008-07-215-74/+75
| | | | | | | | | | | | | | | | | This patch (as1089) separates out the dynamic atomic bitflags and the static bitfields in usb-storage. Until now the two sorts of flags have been sharing the same word; this has always been awkward. To help prevent possible confusion, the two new fields each have a different name from the original. us->fflags contains the fixed bitfields (mostly taken from the USB ID table in unusual_devs.h), and us->dflags contains the dynamic atomic bitflags (used with set_bit, test_bit, and so on). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame.Andrew Lunn2008-07-211-0/+11
| | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: mass storage: new id for US_SC_CYP_ATACBmatthieu castet2008-07-031-0/+8
| | | | | | | | | CY7C68310 chip also support cypress atacb "ATA command" pass_thru. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add support for ROKR W5 in unusual_devs.hJavier Smaldone2008-05-291-2/+4
| | | | | | | | | | This patch adds support for rev 2 of an existing unusual_devs entry enabling ROKR W5s to work. Greg, please apply. From: Javier Smaldone <javier@smaldone.com.ar> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix M600i unusual_devs entryPhil Dibowitz2008-05-291-1/+1
| | | | | | | | | | It turns out that the unusual_devs entry for the Motorola M600i needs another flag. This patch adds it. Thanks to Atte André Jensen <atte@ballbreaker.dk>. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: unusual_devs update for Cypress ATACBAlan Stern2008-05-291-1/+1
| | | | | | | | | | | This patch (as1101) updates the unusual_devs entry for the Cypress ATACB pass-through. The protocol field is changed from US_PR_BULK to US_PR_DEVICE, since the Cypress devices already set bInterfaceProtocol to Bulk-only. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs: Add support for GI 0401 SD-Card interfaceFilip Aben2008-05-141-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enables the SD-Card interface on the GI 0401 HSUPA card from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. This revised patch adds a small comment explaining why and reduces the rev range. T: Bus=02 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7401 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=10 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 4 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 5 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 6 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 7 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Filip Aben <f.aben@option.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix unusual_devs.h orderingPhil Dibowitz2008-05-141-26/+25
| | | | | | | | This patch fixes ordering problems with entries in unusual_devs.h. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Support for the ET502HS HDSPA modemandreoli@samba.ing.unimo.it2008-05-141-0/+10
| | | | | | | | | | The attached patch allows to bypass the ZeroCD mechanism for the ET502HS HDSPA modem, so that it can be mounted as a network device. Signed-off-by: Mauro Andreolini <andreoli@weblab.ing.unimo.it> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2008-05-022-1/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic94xx: fix section mismatch [SCSI] u14-34f: Fix 32bit only problem [SCSI] dpt_i2o: sysfs code [SCSI] dpt_i2o: 64 bit support [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent [SCSI] dpt_i2o: use standard __init / __exit code [SCSI] megaraid_sas: fix suspend/resume sections [SCSI] aacraid: Add Power Management support [SCSI] aacraid: Fix jbod operations scan issues [SCSI] aacraid: Fix warning about macro side-effects [SCSI] add support for variable length extended commands [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer [SCSI] bsg: add large command support [SCSI] aacraid: Fix down_interruptible() to check the return value correctly [SCSI] megaraid_sas; Update the Version and Changelog [SCSI] ibmvscsi: Handle non SCSI error status [SCSI] bug fix for free list handling [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions [SCSI] megaraid_mbox: fix Dell CERC firmware problem
| * [SCSI] Let scsi_cmnd->cmnd use request->cmd bufferBoaz Harrosh2008-05-022-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | USB: storage: Update mailling list addressAndrew Lunn2008-05-022-2/+4
| | | | | | | | | | | | | | | | | | | | | | drivers/usb/storage/unusual_devs.h lists the address linux-usb-devel@lists.sourceforge.net for patches to that file. This address results in a bounce and a pointer to vger. This patch updates the address in the header file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame.Andrew Lunn2008-05-021-0/+11
| | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: INTOVA Pixtreme camera mass storage deviceRohan Hart2008-05-021-0/+7
| | | | | | | | | | | | | | | | | | | | FIX_CAPACITY is all that's needed. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: libusual kthread_run() called with wrong format.Rusty Russell2008-05-021-1/+1
| | | | | | | | | | | | Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 15:57:01 +0000