summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* [SK_BUFF]: Convert skb->end to sk_buff_data_tArnaldo Carvalho de Melo2007-04-251-2/+2
| | | | | | | | Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo2007-04-255-11/+11
| | | | | | | | | | | | | | | So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo2007-04-256-8/+3
| | | | | | | One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* usb-net/pegasus: fix pegasus carrier detectionDan Williams2007-04-242-6/+14
| | | | | | | | | | | | | | | | | Broken by 4a1728a28a193aa388900714bbb1f375e08a6d8e which switched the return semantics of read_mii_word() but didn't fix usage of read_mii_word() to conform to the new semantics. Setting carrier to off based on the NO_CARRIER flag is also incorrect as that flag only triggers on TX failure and therefore isn't correct when no frames are being transmitted. Since there is already a 2*HZ MII carrier check going on, defer to that. Add a TRUST_LINK_STATUS feature flag for adapters where the LINK_STATUS flag is actually correct, and use that rather than the NO_CARRIER flag. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* USB: Nikon D80 unusual device patchEmil Larsson2007-04-111-0/+7
| | | | | | | | | | | the Nikon D80 camera will not work without an UNUSUAL_DEV entry embodied in the attached patch (made against 2.6.20.3). Hope you find it helpful, or if not, pass it along to someone who does. From: Emil Larsson <emil@swip.net> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: fix remote wakeup regression in 2.6.21-rcAlan Stern2007-04-111-0/+1
| | | | | | | | | | | | | | | | | There is one significant difference between the behavior of root hubs (as embodied in host controller hardware) and external hubs: When a remote-wakeup signal is received, an external hub sends an interrupt message at the _end_ of the resume sequence but a root hub generates and interrupt at the _beginning_ of the resume sequence. The host system must poll for the end of the sequence. When ehci-hcd was converted to interrupt-driven operation instead of using polling, the remaining need for this particular poll was overlooked. This patch (as894) fixes the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix usb-serial/ftdi build warningDavid Brownell2007-03-261-1/+5
| | | | | | | | | | | | | | Fix annoying build warning: drivers/usb/serial/ftdi_sio.c:890: warning: enumeration value `FT232RL' not handled in switch Also add logic to detect FT232R chips (version 6.00, usb 2.0 full speed), so that case isn't completely useless. (NOTE: FT232RL and FT232RQ are the same chip in different packages: L is SSOP, Q is QFN.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix usb-serial/generic build warningDavid Brownell2007-03-261-3/+4
| | | | | | | | | | Fix annoying build warning when CONFIG_USB_SERIAL_GENERIC is undefined. drivers/usb/serial/generic.c:24: warning: `generic_probe' declared `static' but never defined Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: another entry for the quirk listOliver Neukum2007-03-261-1/+2
| | | | | | | | this scanner disconnects upon suspend. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove duplicated device id in airprime driverJon K Hellan2007-03-261-1/+0
| | | | | | | | | | | Both airprime and option now want to handle vendor ID 0x1410, device ID 0x1100. Airprime calls it 'ExpressCard34 Qualcomm 3G CDMA'. Option calls it 'Novatel Merlin XS620/S640'. Patch attached to remove it from airprime. From: Jon K Hellan <jon.kare.hellan@uninett.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: omap_udc: workaround dma_free_coherent() bogosityDavid Brownell2007-03-261-10/+93
| | | | | | | | | | | | | | | | | | | | | | | | Various fixes to omap_udc, noted with some recent testing: - Cope with some SMP-induced braindamage in ARM's dma_{alloc,free}_coherent() implementation: alloc() can be called with IRQs blocked, but since late last year that's no longer true for free(). This resolves really NASTY problems with logspamming via WARN_ON(), indicating N-page leaks. - Be more correct in handling GET_STATUS request for RECIP_ENDPOINT ... the previous code only handled RECIP_INTERFACE, this version should be correct except for (sigh) bulk/interrupt endpoints. - Provide a better name for the function reporting whether the board has vbus sensing wired up. GET_STATUS requests for endpoint status still acts strangely though, at least given one flakey host doesn't always ack the first DATA packet, then the packet that gets retransmitted doesn't have data! Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: Fix problem caused by lack of terminating QHAlan Stern2007-03-263-82/+41
| | | | | | | | | | | | | | This patch (as871) fixes a problem introduced by an earlier change. It turns out that some systems really do need to have a terminating skeleton QH present whenever FSBR is on. I don't know any way to tell which systems do need it and which don't; the easiest answer is to have it there always. This fixes the NumLock-hang bug reported by Jiri Slaby. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: new Novatel device ids for option driverGreg Kroah-Hartman2007-03-192-7/+13
| | | | | | | | | This moves all of the Novatel device ids to the option driver, where they belong. Thanks to Novatel for providing a list of all supported devices. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: berry_charge: correct dbg string for second magic commandKen L Johnson2007-03-191-1/+1
| | | | | | | | | | I was testing the berry_charge module with my Blackberry 8700c and had great success, thanks. Looking at the code for my own learning I noticed the following cut and paste error... just a nit. Signed-off-by: Ken L Johnson <ken@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usblp: quirk flag and device entry for Seiko Epson M129C printerAlan Stern2007-03-191-1/+5
| | | | | | | | | | | | | | This patch (as872) adds a device table entry and a new quirk flag to the usblp driver for the Seiko Epson Receipt printer. This printer returns Vendor-Specific values for bInterfaceClass and bInterfaceSubClass, but the bInterfaceProtocol value is valid and it works with usblp. The new quirks flag tells the driver to ignore the Class and SubClass values in the interface descriptor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* airprime: USB ID for Novatel EV620 mini PCI-E cardMark Glines2007-03-191-2/+3
| | | | | | | | | | | | | | | | | | | | Add an ID to recognise the Novatel EV620 wireless adapter. http://www.novatelwireless.com/products/expedite/ev620.html It looks like a mini PCI-Express adapter. The mPCIE connector includes USB pins... the card shows up to the system as a USB device, and powers itself from the PCI bus. The card I have isn't activated yet, so I can't get a PPP session up yet, but I have tested basic serial communication successfully in both 2.6.18 and 2.6.20 kernels, once the product ID was added. (the driver changed quite a bit between the two revs.) In both drivers, it responds to AT commands and such. Signed-off-by: Mark Glines <mark@glines.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: necessary update for mos7720 driverOliver Neukum2007-03-191-0/+1
| | | | | | | | | | | | | these devices have a shared interrupt endpoint. For serialcore to pass an interrupt endpoint to a subdriver, the subdriver must define and _export_ a fitting callback. The mos7720 driver failed to do so. This led invariably to an oops upon open. This patch fixes it. The driver is useless without it. Please try to get this into 2.6.21 and the stable kernels that have this driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: RAZR v3i unusual_devsPete Zaitcev2007-03-191-0/+10
| | | | | | | | | This adds an unusual_devs entry for the Motorola RAZR 3vi. From: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: two more device ids for dm9601 usbnet driverJon Dowland2007-03-191-0/+8
| | | | | | | | | | | This patch for the linux-usb-devel tree adds two more product ids to the dm9601 driver. These ids were found on rebadged dm9601 devices in the wild. Signed-off-by: Jon Dowland <jon@alcopop.org> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix usb-serial regressionJim Radford2007-03-191-6/+5
| | | | | | | | | | | This patch reverts d9a7ecacac5f8274d2afce09aadcf37bdb42b93a since it breaks drivers that need to access the ->port[] array in shutdown (most of them). Signed-Off: Jim Radford <radford@blackbean.org> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "USB: pxa2xx_udc: fix hardcoded irq number"Linus Torvalds2007-03-101-1/+1
| | | | | | | | | | | | | | | This reverts commit d2487cb4257dafb686f682285854fe7f02ca29d8. Russell King points out that it's obviously bogus, and I have to agree. Not only does "irq" not even exist in that scope, but we obviously need to free the irq that we actually requested, and that's IRQ_USB. Reported-by: Russell King <rmk@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net>, Cc: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB Elan FTDI: check for workqueue creationCyrill Gorcunov2007-03-091-2/+16
| | | | | | | | | | Avoid NULL pointer usage if workqueue creation failed. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix spinlock recursion in cdc-acm.cOliver Neukum2007-03-091-4/+4
| | | | | | | | | | this fixes the spinlock recursion issue. The older fix was incomplete. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix Unaligned access in EHCI driverMax Dmitrichenko2007-03-091-2/+1
| | | | | | | | | | | | | | I get following warnings on spar64: Kernel unaligned access at TPC[1000c9e4] ehci_hub_control+0x54c/0x68c [ehci_hcd] Despite of the comment in the patched code, the type cast used there does make unaligned access. The fix was made as it's done in ohci-hub.c. Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Product ID for FT232RL in ftdi_sioGard Spreemann2007-03-092-0/+4
| | | | | | | | | | | | | | Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USBNET: DM9501: Add Corega FEther USB-TXC support.YOSHIFUJI Hideaki2007-03-091-0/+4
| | | | | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ipaq.c: Additional devicesAndre Spahlinger2007-03-091-0/+2
| | | | | | | | Additional devices Signed-off-by: Andre Spahlinger <uenz@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: further fix for usb-serialOliver Neukum2007-03-091-5/+4
| | | | | | | | this is a fix for the outstanding usb-serial issues. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix usb-serial device naming bugOliver Neukum2007-03-091-1/+1
| | | | | | | | | | | | | | | | | Am Montag, 26. Februar 2007 15:16 schrieb Craig Schlenter: > Hi Greg > > 34ef50e5b1f96c2d8c0f3d28b7d407743806256c is definitely > the source of the problem. Reverting that makes the > ftdi port show up as ttyUSB0 again for me and it > can actually be opened. This patch should fix the issue. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Craig Schlenter <craig@codefountain.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: RTS/DTR signal patch for airprime driverMartin Schiller2007-03-091-0/+47
| | | | | | | | | | | | | | | I encountered some problems with the airprime driver in use with a Novatel Merlin XU870: Closing an open Connection to e.g. /dev/ttyUSB0 doesn't reset the RTS/DTR lines of the Modem. Consequently, when I use minicom to establish a connection by "ATD*99#" the modem doesn't hang up even if i exit minicom and so I cannot reuse the modem unless I remove it and plug it in again. With the attached patch, the RTS/DTR lines are resetted on a close. The code was mainly taken from the option.c driver.
* USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the ↵Jim Radford2007-03-091-44/+35
| | | | | | | | | | | | | | latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-serial: fix shutdown / device_unregister orderJim Radford2007-03-091-5/+6
| | | | | | | | | | Ensure that the ->port_remove() callbacks get called before the ->shutdown() callback which makeing the order symmetric with ->attach() being called before ->port_probe(). Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add Additional PIDs in ftdi_sioThomas Schleusener2007-03-092-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | I've developed some devices with FTDI chips (FT232xx). FTDI was so kind to give some own PID's which I can use together with their VID. Some of the devices are already very popular here and I have customers from universities, institutes ..... I use the FTDI VID 0x0403. My PID's are: 0xff38 - IBS US485 (USB<-->RS422/485 interface) 0xff39 - IBS PIC-Programmer 0xff3a - IBS Card reader for PCMCIA SRAM-cards 0xff3b - IBS PK1 - Particel counter 0xff3c - IBS RS232 - Monitor 0xff3d - APP 70 (dust monitoring system) 0xff3e - IBS PEDO-Modem (RF modem 868.35 MHz) 0xff3f - future device The company is "IBS Ing.-Buero Schleusener". From: Thomas Schleusener <thomas@be-schl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add QL355P power supply ids to fdti_sioMichael Olberg2007-03-092-0/+7
|
* USB: New device IDs for cp2101 driverJon K Hellan2007-03-091-0/+2
| | | | | | | | | Here are two new device IDs for the cp2101 driver. The diff is with linus's tree as of this evending. From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: kill dead code from hub.cOliver Neukum2007-03-091-7/+0
| | | | | | | | this kills residual obsoletet code from hub.c Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ratelimit debounce error messagesOliver Neukum2007-03-091-1/+1
| | | | | | | | | flaky hardware can cause a lot of debounce failed messages. To limit the performance impact, a ratelimit should be used. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: pxa2xx_udc: fix hardcoded irq numberMilan Svoboda2007-03-091-1/+1
| | | | | | | | | | This patch changes last use of hardcoded number of irq to use platfrom_get_irq. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: fix port resume problemAlan Stern2007-03-091-4/+7
| | | | | | | | | | | | | This patch (as863) fixes a problem encountered sometimes when resuming a port on a UHCI controller. The hardware may turn off the Resume-Detect bit before turning off the Suspend bit, leading usbcore to think that the port is still suspended and the resume has failed. The patch makes uhci_finish_suspend() wait until both bits are safely off. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: set the correct interval for interrupt URBsAlan Stern2007-03-092-9/+13
| | | | | | | | | | | | This patch (as862) fixes a couple of bugs in the way usbcore handles intervals for interrupt URBs. usb_interrupt_msg (and usb_bulk_msg for backward compatibility) don't set the interval correctly for high-speed devices. proc_do_submiturb() doesn't set it correctly when a bulk URB is submitted to an interrupt endpoint. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: goku_udc: Remove crude cache coherency codeRalf Baechle2007-03-091-29/+0
| | | | | | | | | | This is deep architecture specific magic and does should not to exist in a driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB storage: Nokia 6288 unusual_devs entryAndrew Nayenko2007-03-091-0/+7
| | | | | | | | | | This patch adds an usual_devs entry for the Nokia 6288. Originally from Andrew with a re-diff by Phil. From: Andrew Nayenko <relan@bk.ru> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB storage: Removed duplicate supertop unusual_dev entryPhil Dibowitz2007-03-091-10/+0
| | | | | | | | | This patch removes the duplicate supertop entries that made it into the .21 rc kernels. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: at91_udc, fix more modpost bogosity (rename driver struct)David Brownell2007-03-091-3/+3
| | | | | | | | | Rename the driver struct used with at91_udc to prevent yet another bogus warning from "modpost". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-03-061-11/+10
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: HID blacklisting of all Code Mercenaries IOWarrior devices
| * HID blacklisting of all Code Mercenaries IOWarrior devicesRobert Marquardt2007-03-021-11/+10
| | | | | | | | | | | | | | | | | | Put all Code Mercenaries (VID 0x07c0) IOWarriors (PIDs 0x1500 to 0x15ff) on the HID blacklist. The range of PIDs has been reserved for IOWarriors. Only 5 PIDs are really used yet. Signed-off-by: Robert Marquardt <marquardt@codemercs.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | [PATCH] usb-storage: do not rebuild when kernel version changesSam Ravnborg2007-03-051-2/+2
| | | | | | | | | | | | | | | | | | | | Replacing use of UTS_RELEASE with utsname()->release avoids that the usb-storage driver is recompiled each time the kernel version changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle buttonJiri Kosina2007-03-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dongle shipped with Logitech DiNovo Edge (0x046d/0xc714) behaves in a weird non-standard way - it contains multiple reports with the same usage, which results in remapping of GenericDesktop.X and GenericDesktop.Y usages to GenericDesktop.Z and GenericDesktop.RX respectively, thus rendering the touchwheel unusable. The commit 35068976916fdef82d6e69ef1f8c9a1c47732759 solved this in a way that it didn't remap certain usages. This however breaks (at least) middle button of Logic3 / SpectraVideo (0x1267/0x0210), which in contrary requires the remapping. To make both of the harware work, allow remapping of these usages again, and introduce a quirk for Logitech DiNovo Edge "touchwheel" instead - we disable remapping for key, abs and rel events only for this hardware. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: fix broken Logitech S510 keyboard report descriptor; make extra keys workJiri Kosina2007-03-011-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes extra keys (F1-F12 in special mode, zooming, rotate, shuffle) on Logitech S510 keyboard work. Logitech S510 keyboard sends in report no. 3 keys which are far above the logical maximum described in descriptor for given report. This patch introduces a HID quirk for this wireless USB receiver/keyboard in order to fix the report descriptor before it's being parsed - the logical maximum and the number of usages is bumped up to 0x104d). The values are in the "Reserved" area of consumer HUT, so HID_MAX_USAGE had to be changed too. In addition to proper extracting of the values from report descriptor, proper HID-input mapping is introduced for them. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | USB HID: use CONFIG_HID_DEBUG for outputting report descriptorJiri Kosina2007-03-011-4/+1
| | | | | | | | | | | | | | | | | | Report descriptor should be output when CONFIG_HID_DEBUG is defined. This also mitigates the need for DEBUG and DEBUG_DATA defines, so let's remove them. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:56:44 +0000