summaryrefslogtreecommitdiffstats
path: root/drivers/w1/slaves
Commit message (Collapse)AuthorAgeFilesLines
* 1-Wire: Add support for the maxim ds1825 temperature sensorRaphael Assenat2012-08-161-0/+9
| | | | | | | This patch adds support for maxim ds1825 based 1-wire temperature sensors. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: Add 1-wire slave device driver for DS28E04-100Markus Franke2012-06-133-0/+483
| | | | | Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* W1: split master mutex to avoid deadlocks.NeilBrown2012-06-1311-73/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'mutex' in struct w1_master is use for two very different purposes. Firstly it protects various data structures such as the list of all slaves. Secondly it protects the w1 buss against concurrent accesses. This can lead to deadlocks when the ->probe code called while adding a slave needs to talk on the bus, as is the case for power_supply devices. ds2780 and ds2781 drivers contain a work around to track which process hold the lock simply to avoid this deadlock. bq27000 doesn't have that work around and so deadlocks. There are other possible deadlocks involving sysfs. When removing a device the sysfs s_active lock is held, so the lock that protects the slave list must take precedence over s_active. However when access power_supply attributes via sysfs, the s_active lock must take precedence over the lock that protects accesses to the bus. So to avoid deadlocks between w1 slaves and sysfs, these must be two separate locks. Making them separate means that the work around in ds2780 and ds2781 can be removed. So this patch: - adds a new mutex: "bus_mutex" which serialises access to the bus. - takes in mutex in w1_search and ds1wm_search while they access the bus for searching. The mutex is dropped before calling the callback which adds the slave. - changes all slaves to use bus_mutex instead of mutex to protect access to the bus - removes w1_ds2790_io_nolock and w1_ds2781_io_nolock, and the related code from drivers/power/ds278[01]_battery.c which calls them. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "w1: introduce a slave mutex for serializing IO"Greg Kroah-Hartman2012-06-131-2/+2
| | | | | | | | | | | | This reverts commit 59d4467be405316916a4087d5b02d99196eeef04. Turns out it was the wrong version, will apply the correct version after this. Reported-by: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: introduce a slave mutex for serializing IONeilBrown2012-06-121-2/+2
| | | | | | | | | | | | | | | | | | | | w1 devices need a mutex to serial IO. Most use master->mutex. However that is used for other purposes and they can conflict. In particular master->mutex is held while w1_attach_slave_device is called. For bq27000, this registers a 'powersupply' device which tries to read the current status. The attempt to read will cause a deadlock on master->mutex. So create a new per-slave mutex and use that for serializing IO for bq27000. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: w1_ds2408.c: quite sparse noise about using plaing integer as NULL pointerH Hartley Sweeten2012-05-041-2/+0
| | | | | | | | | NULL not 0 should be used with pointers. Just remove the offending lines since they will default to NULL anyway. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "w1: Add 1-wire slave device driver for DS28E04-100"Greg Kroah-Hartman2012-04-293-472/+0
| | | | | | | | | | | This reverts commit f19420c1acb0b573c88a12deb2d42035e22d4a17. It contained lots of errors and warnings and shouldn't have ever been applied, that was my fault, sorry. Cc: Markus Franke <markus.franke@s2002.tu-chemnitz.de> Cc: Evgeniy Polyakov <zbr@ioremap.net>, Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: w1_ds28e04: unlock on error path in w1_f1C_write_pio()Dan Carpenter2012-04-181-1/+3
| | | | | | | | We should unlock here before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: Add 1-wire slave device driver for DS28E04-100Markus Franke2012-04-113-0/+470
| | | | | | | | This patch adds a 1-wire slave device driver for the DS28E04-100. Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave driversRenata Sayakhova2012-03-084-0/+351
| | | | | | Signed-off-by: Renata Sayakhova <rsayakhova@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1_bq27000: Only one thread can access the bq27000 at a time.NeilBrown2012-02-241-0/+2
| | | | | | | | If multiple threads try, they trip over each other badly. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1_bq27000 - remove w1_bq27000_writeNeilBrown2012-02-241-14/+0
| | | | | | | | | The function is never used so remove it to avoid bit-rot. It can trivially be re-added if there is ever a need. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1_bq27000: remove unnecessary NULL test.NeilBrown2012-02-241-3/+0
| | | | | | | | | | | | | | | | | As recent change means that we now dereference 'dev' before testing for NULL. That means either the change was wrong, or the test isn't needed. As this function is only called from one driver (bq27x000_battery) and it always passed a non-NULL dev, it seems good to assume that the test isn't needed. So remove it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: Fix w1_bq27000NeilBrown2012-02-151-5/+12
| | | | | | | | | | | | | | | | | | | | w1_bq27000 adds a bq27000-battery platform device but does not provide platform data for it. This causes the bq27x00 driver to dereference a NULL pointer. So provide the appropriate platform data. This requires modifying w1_bq27000_read so that it find the w1 device as the parent of the bq device. Also there is no point exporting w1_bq27000_read as nothing else uses it or could use it. So make it static. Finally, as there is no way to track how many batteries have been found, and we will probably only find one, use an id number of '-1' to assert that this is a unique instance. Signed-off-by: NeilBrown <neilb@suse.de> Tested-by: Thomas Weber <weber@corscience.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* W1: w1_therm: release the bus during conversion on externally powered devicesMaciej Szmigiero2011-11-171-5/+31
| | | | | | | | | | | | | | | | | | | | | | | | w1_therm devices can either be bus powered or externally powered. When device is bus powered during temperature conversion the bus have to be left high to provide necessary power. Some masters also allow strong power-up to be enabled in this case. Naturally, no communication over bus can occur during that time. However, if device has external power then there is no such restriction, and host can talk to other devices during temperature conversion. There is command which allows us to check how device is powered, this patch uses it to release the bus on externally w1_therm powered devices during temperature conversion. Also, this changes uninterruptible sleeps there into interruptible ones to avoid long uninterruptible sleep if w1 subsystem happens to grab bus for scan during w1_therm_read(). Signed-off-by: Maciej Szmigiero <mhej@o2.pl> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/power/ds2780_battery.c: add a nolock function to w1 interfaceClifton Barnes2011-11-022-13/+37
| | | | | | | | | | | | Adds a nolock function to the w1 interface to avoid locking the mutex if needed. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get itJonathan Cameron2011-11-022-84/+12
| | | | | | | | | | | Straightforward. As an aside, the ida_init calls are not needed as far as I can see needed. (DEFINE_IDA does the same already). Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Clifton Barnes <cabarnes@indesign-llc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MAINTAINERS: Evgeniy has movedEvgeniy Polyakov2011-08-252-4/+4
| | | | | | Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: fix for loop in w1_f29_remove_slave()Dan Carpenter2011-08-251-1/+1
| | | | | | | | | | | | | The for loop was looking for i <= 0 instead of i >= 0 so this function never did anything. Also we started with i = NB_SYSFS_BIN_FILES instead of "NB_SYSFS_BIN_FILES - 1" which is an off by one bug. Reported-by: Bojan Prtvar <prtvar.b@gmail.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jean-Franois Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/w1/slaves/w1_therm.c: add support for DS28EA00Christian Glindkamp2011-07-261-0/+9
| | | | | | | Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC supportClifton Barnes2011-05-264-0/+360
| | | | | | | | | | | | | | | | | Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC. It was suggested to combine this functionality with the current ds2782 driver. Unfortunately, I'm unable to commit the time to refactoring this driver to that extent and I don't have a platform with the ds2782 part to validate that there are no regression issues by adding this functionality. [akpm@linux-foundation.org: use min_t()] Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: add 1-wire (w1) DS2408 8-Channel Addressable Switch supportJean-François Dagenais2011-05-263-0/+410
| | | | | | | | | | | | | | This DS2408 w1 slave driver is not complete for all the features of the chip, but its sufficient if you use it as a simple IO expander. [randy.dunlap@oracle.com: fix w1_ds2408.c printk formats] Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: DS2423 counter driver and documentationMika Laitio2011-01-133-0/+178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a 1-wire/w1 DS2423 slave driver for reading the values from all 4 counters available DS2423 devices by using standard w1_slave file. In ds2423 the counters are tied to ram pages 12-15 in and each of those ram-pages. Each of these counter values (and asoociated ram page values) are represented as a own line in w1_slave file. Driver has been tested on mips and x86. usage example: cat /sys/bus/w1/devices/1d-00000009b964/w1_slave 00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2 00 02 00 00 00 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2 00 5a 0e 5f 18 00 00 00 00 0b 28 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=408882778 00 05 00 00 00 00 00 00 00 8d 39 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff crc=YES c=5 Patch includes also the documentation. [randy.dunlap@oracle.com: fix ds2423 build, needs to select CRC16] Signed-off-by: Mika Laitio <lamikr@pilppa.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sysfs: add struct file* to bin_attr callbacksChris Wright2010-05-213-5/+5
| | | | | | | | | This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* w1: w1 temp: fix negative termperature calculationIan Dall2010-04-241-3/+2
| | | | | | | | | | | | | | | | | | | Fix regression caused by commit 507e2fbaaacb6f164b4125b87c5002f95143174b ("w1: w1 temp calculation overflow fix") whereby negative temperatures for the DS18B20 are not converted properly. When the temperature exceeds 32767 milli-degrees the temperature overflows to -32768 millidegrees. These are both well within the -55 - +125 degree range for the sensor. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=12646 Signed-of-by: Ian Dall <ian@beware.dropbear.id.au> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Tested-by: Karsten Elfenbein <kelfe@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-302-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* w1: ds2760_battery: add support for sleep mode featureDaniel Mack2009-06-081-0/+5
| | | | | | | | | | | | | | | This adds support for ds2760's sleep mode feature. With this feature enabled, the chip enters a deep sleep mode and disconnects from the battery when the w1 line is held down for more than 2 seconds. This new behaviour can be switched on and off using a new module parameter. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* w1: ds2760: add support for EEPROM read and writeDaniel Mack2009-06-082-0/+32
| | | | | | | | | | | In order to modify the DS2762's status registers and to add support for sleep mode, there is need for functions to write the internal EEPROM. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Matt Reimer <mreimer@vpop.net> Acked-by: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* w1: add missing Kconfig/Makefile entries for DS2431 slave driverHerton Ronaldo Krzesinski2009-02-272-0/+7
| | | | | | | Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1_ds2433: clear the validcrc flag after a writeBen Gardner2009-02-271-1/+6
| | | | | | | | | | | The w1_ds2433 driver does not read from the hardware if the CRC was valid on the last read. The validcrc flag should be cleared after a write so that the new value can be read. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: w1 temp calculation overflow fixIan Dall2009-02-111-1/+1
| | | | | | | | | | | | | | | | Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12646 When the temperature exceeds 32767 milli-degrees the temperature overflows to -32768 millidegrees. These are bothe well within the -55 - +125 degree range for the sensor. Fix overflow in left-shift of a u8. Signed-off-by: Ian Dall <ian@beware.dropbear.id.au> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hdq: bQ27000 HDQ Slave Interface DriverMadhusudhan Chikkature2008-11-123-1/+131
| | | | | | | | | Provide the BQ27000 slave interface driver. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86: sysfs: kill owner field from attributeParag Warudkar2008-10-201-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tejun's commit 7b595756ec1f49e0049a9e01a1298d53a7faaa15 made sysfs attribute->owner unnecessary. But the field was left in the structure to ease the merge. It's been over a year since that change and it is now time to start killing attribute->owner along with its users - one arch at a time! This patch is attempt #1 to get rid of attribute->owner only for CONFIG_X86_64 or CONFIG_X86_32 . We will deal with other arches later on as and when possible - avr32 will be the next since that is something I can test. Compile (make allyesconfig / make allmodconfig / custom config) and boot tested. akpm: the idea is that we put the declaration of sttribute.owner inside `#ifndef CONFIG_X86'. But that proved to be too ambitious for now because new usages kept on turning up in subsystem trees. [akpm: remove the ifdef for now] Signed-off-by: Parag Warudkar <parag.lkml@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <htejun@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: new driver. DS2431 chipBernhard Weirich2008-10-161-0/+312
| | | | | | | | | [akpm@linux-foundation.org: minor fixlets and cleanups] Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* W1: w1_therm consistent mutex access code cleanupDavid Fries2008-10-161-1/+1
| | | | | | | | | | | sl->master->mutex and dev->mutex refer to the same mutex variable, but be consistent and use the same set of pointers for the lock and unlock calls. It is less confusing (and one less pointer dereference this way). Signed-off-by: David Fries <david@fries.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* W1: w1_therm fix user buffer overflow and catDavid Fries2008-10-161-35/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed data reading bug by replacing binary attribute with device one. Switching the sysfs read from bin_attribute to device_attribute. The data is far under PAGE_SIZE so the binary interface isn't required. As the device_attribute interface will make one call to w1_therm_read per file open and buffer, the result is, the following problems go away. buffer overflow: Execute a short read on w1_slave and w1_therm_read_bin would still return the full string size worth of data clobbering the user space buffer when it returned. Switching to device_attribute avoids the buffer overflow problems. With the snprintf formatted output dealing with short reads without doing a conversion per read would have been difficult. bad behavior: `cat w1_slave` would cause two temperature conversions to take place. Previously the code assumed W1_SLAVE_DATA_SIZE would be returned with each read. It would not return 0 unless the offset was less than W1_SLAVE_DATA_SIZE. The result was the first read did a temperature conversion, filled the buffer and returned, the offset in the second read would be less than W1_SLAVE_DATA_SIZE and also fill the buffer and return, the third read would finnally have a big enough offset to return 0 and cause cat to stop. Now w1_therm_read will be called at most once per open. Signed-off-by: David Fries <david@fries.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* W1: feature, w1_therm.c use strong pullup and documentationDavid Fries2008-10-161-2/+13
| | | | | | | | | | Added strong pullup to thermal sensor driver and general documentation on the sensor. Signed-off-by: David Fries <david@fries.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* W1: w1_therm.c standardize units to millidegrees CDavid Fries2008-02-061-1/+2
| | | | | | | | | | | | | | | | | | | Standardize the temperature units to millidegrees C for the two sensor conversion routines. Previously the routines were, w1_DS18B20_convert_temp degrees C w1_DS18S20_convert_temp millidegrees C Unfortunately this will break any program using the ds18b20 value as it will now be 1000 times bigger. Fortunately there can't be that many users out there, or some of these bugs will have been fixed by now, such as the negative C error (see previous patch) that makes me think the ds18b20 is the better choice to change because of the current bugs. Signed-off-by: David Fries <david@fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* W1: w1_therm.c is flagging 0C etc as invalidDavid Fries2008-01-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The extra rom[0] check is flagging valid temperatures as invalid when there is already a CRC data transmission check. w1_therm_read_bin() if (rom[8] == crc && rom[0]) verdict = 1; Requiring rom[0] to be non-zero will flag as invalid temperature conversions when the low byte is zero, specifically the temperatures 0C, 16C, 32C, 48C, -16C, -32C, and -48C. The CRC check is produced on the device for the previous 8 bytes and is required to ensure the data integrity in transmission. I don't see why the extra check for rom[0] being non-zero is in there. Evgeniy Polyakov didn't know either. Just for a check I unplugged the sensor, executed a temperature conversion, and read the results. The read was all ff's, which also failed the CRC, so it doesn't need to protect against a disconnected sensor. I have more extensive patches in the work, but these two trivial ones will do for today. I would like to hear from people who use the ds2490 USB to one wire dongle. 1 if you would be willing to test the patches as I currently only have the one sensor on a short parisite powered wire, 2 if there is any cheap sources for the ds2490. Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* W1: w1_therm.c ds18b20 decode freezing temperatures correctlyDavid Fries2008-01-221-1/+1
| | | | | | | | | | | | | | | | | | | | Correct the decoding of negative C temperatures. The code did a binary OR of two bytes to make a 16 bit value, but assignd it to an integer. This caused the value to not be sign extended and to loose that it was a negative number in the assignment. Before the patch (in my freezer), w1_slave ed fe 4b 46 7f ff 03 10 e4 : crc=e4 YES ed fe 4b 46 7f ff 03 10 e4 t=4078 With the patch, e3 fe 4b 46 7f ff 0d 10 81 : crc=81 YES e3 fe 4b 46 7f ff 0d 10 81 t=-17 Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau2007-07-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use menuconfig objects: W1Jan Engelhardt2007-07-161-4/+0
| | | | | | | | | | Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git-battery vs git-acpiAndrew Morton2007-07-151-2/+3
| | | | | | | | | | | drivers/w1/slaves/w1_ds2760.c:85: warning: initialization from incompatible pointer type The ACPI guys changed the bin_attr APIs (commit 91a6902958f052358899f58683d44e36228d85c2) Cc: Anton Vorontsov <cbou@mail.ru> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* Power supply class and drivers: remove non obligatory return statementsAnton Vorontsov2007-07-151-4/+0
| | | | | | | Per Jeff Garzik request. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
* sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui2007-07-112-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* sysfs: kill unnecessary attribute->ownerTejun Heo2007-07-112-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [BATTERY] ds2760 W1 slaveAnton Vorontsov2007-07-104-0/+277
| | | | | | | | | This is W1 slave for ds2760 chip, found inside almost every HP iPaq and HTC PDAs/phones. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* w1_therm_read_bin: don't call flush_signals()Evgeniy Polyakov2007-06-281-5/+1
| | | | | | | | | | This can disrupt userspace signal management. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] w1: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish2007-02-121-3/+3
| | | | | | | | | A patch to use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] w1: Fix for kconfig entry typoEvgeniy Polyakov2006-12-131-2/+2
| | | | | | | | Based on patch from Alexander Rigbo <alexander.rigbo@acgnystrom.se> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 23:59:36 +0000