summaryrefslogtreecommitdiffstats
path: root/include/sound
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: core: conditionally increase module refcount on component openRanjani Sridharan2019-04-081-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Recently, for Intel platforms the "ignore_module_refcount" field was introduced for the component driver. In order to avoid a deadlock preventing the PCI modules from being removed even when the card was idle, the refcounts were not incremented for the device driver module during component probe. However, this change introduced a nasty side effect: the device driver module can be unloaded while a pcm stream is open. This patch proposes to change the field to be renamed as "module_get_upon_open". When this field is set, the module refcount should be incremented on pcm open amd decremented upon pcm close. This will enable modules to be removed when no PCM playback/capture happens and prevent removal when the component is actually in use. Also, align with the skylake component driver with the new name. Fixes: b450b878('ASoC: core: don't increase component module refcount unconditionally' Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge tag 'v5.1-rc1' into asoc-5.1Mark Brown2019-03-1810-29/+59
|\ | | | | | | Linux 5.1-rc1
| * Merge tag 'sound-fix-5.1-rc1' of ↵Linus Torvalds2019-03-151-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Some cleaning after the first batch; mostly about HD-audio quirks but also some NULL dereference fixes in corner cases and a random build error fix, too" * tag 'sound-fix-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebook ALSA: pcm: Fix function name in kernel-doc comment ALSA: hda: hdmi - add Icelake support ALSA: hda - add more quirks for HP Z2 G4 and HP Z240 ALSA: hda/realtek - Fixed Headset Mic JD not stable ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255 ALSA: hda/tegra: avoid build error without CONFIG_PM ALSA: usx2y: Fix potential NULL pointer dereference ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start()
| | * ALSA: pcm: Fix function name in kernel-doc commentRicardo Biehl Pasquali2019-03-131-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Ricardo Biehl Pasquali <pasqualirb@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds2019-03-061-2/+3
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
| | * Pull in char-misc-next from GregDaniel Vetter2019-02-202-1/+6
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need 32ea33a04484 ("mei: bus: export to_mei_cl_device for mei client devices drivers") for the mei-hdcp patches. References: https://lkml.org/lkml/2019/2/19/356 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| | * | i915/snd_hdac: I915 subcomponent for the snd_hdacDaniel Vetter2019-02-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we need multiple components for I915 for different purposes (Audio & Mei_hdcp), we adopt the subcomponents methodology introduced by the previous patch (mentioned below). Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jan 28 17:08:20 2019 +0530 components: multiple components for a device Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by-by: Ramalingam C <ramalinagm.c@intel.com> (commit message) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (code) cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Russell King <rmk+kernel@arm.linux.org.uk> cc: Rafael J. Wysocki <rafael@kernel.org> cc: Jaroslav Kysela <perex@perex.cz> cc: Takashi Iwai <tiwai@suse.com> cc: Rodrigo Vivi <rodrigo.vivi@intel.com> cc: Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-4-daniel.vetter@ffwll.ch
| * | | Merge tag 'asoc-v5.1-2' of ↵Takashi Iwai2019-02-284-9/+46
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More changes for v5.1 Another batch of changes for ASoC, no big core changes - it's mainly small fixes and improvements for individual drivers. - A big refresh and cleanup of the Samsung drivers, fixing a number of issues which allow the driver to be used with a wider range of userspaces. - Fixes for the Intel drivers to make them more standard so less likely to get bitten by core issues. - New driver for Cirrus Logic CS35L26.
| | * \ \ Merge branch 'asoc-5.1' into asoc-nextMark Brown2019-02-267-30/+162
| | |\ \ \ | | | |_|/ | | |/| |
| * | | | ALSA: pcm: Define snd_pcm_lib_preallocate_*() as returning voidTakashi Iwai2019-02-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now all callers no longer check the return value from snd_pcm_lib_preallocate_pages() and co, let's make them to return void, so that any new code won't fall into the same pitfall. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | Merge branch 'for-linus' into for-nextTakashi Iwai2019-02-082-1/+6
| |\| | | | | | | | | | | | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | ALSA: compress: Fix stop handling on compressed capture streamsCharles Keepax2019-02-051-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is normal user behaviour to start, stop, then start a stream again without closing it. Currently this works for compressed playback streams but not capture ones. The states on a compressed capture stream go directly from OPEN to PREPARED, unlike a playback stream which moves to SETUP and waits for a write of data before moving to PREPARED. Currently however, when a stop is sent the state is set to SETUP for both types of streams. This leaves a capture stream in the situation where a new start can't be sent as that requires the state to be PREPARED and a new set_params can't be sent as that requires the state to be OPEN. The only option being to close the stream, and then reopen. Correct this issues by allowing snd_compr_drain_notify to set the state depending on the stream direction, as we already do in set_params. Fixes: 49bb6402f1aa ("ALSA: compress_core: Add support for capture streams") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | ALSA: hda - Serialize codec registrationsTakashi Iwai2019-02-011-0/+1
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the current code, the codec registration may happen both at the codec bind time and the end of the controller probe time. In a rare occasion, they race with each other, leading to Oops due to the still uninitialized card device. This patch introduces a simple flag to prevent the codec registration at the codec bind time as long as the controller probe is going on. The controller probe invokes snd_card_register() that does the whole registration task, and we don't need to register each piece beforehand. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | Merge tag 'asoc-v5.1' of ↵Takashi Iwai2019-02-085-21/+116
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v5.1 Lots and lots of new drivers so far, a highlight being the MediaTek BTCVSD which is a driver for a Bluetooth radio chip - the first such driver we've had upstream. Hopefully we will soon also see a baseband with an upstream driver! - Support for only powering up channels that are actively being used. - Quite a few improvements to simplify the generic card drivers, especially the merge of the SCU cards into the main generic drivers. - Lots of fixes for probing on Intel systems, trying to rationalize things to look more standard from a framework point of view. - New drivers for Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341, Google ChromeOS embedded controllers, Ingenic JZ4725B, MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328, Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM formatters.
| * | | | ALSA: info: Move card id proc creation into info.cTakashi Iwai2019-02-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The creation of card's id proc file can be moved gracefully into info.c. Also, the assignment of card->proc_id is superfluous and can be dropped. So let's do it. Basically this is no functional change but code refactoring, but one potential behavior change is that now it returns properly the error code from snd_info_card_register(), which is a good thing (tm). Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | ALSA: info: Drop unused snd_info_entry.card fieldTakashi Iwai2019-02-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's referred only in snd_card_id_read() which can receive the card object via private_data. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | ALSA: info: Add standard helpers for card proc file entriesTakashi Iwai2019-02-061-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two new helper functions are added here for cleaning up the existing lengthy calls. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | ALSA: isa: Avoid passing NULL to memory allocatorsTakashi Iwai2019-02-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We used to pass NULL to memory allocators for ISA devices due to historical reasons. But we prefer rather a proper device object to be assigned, so let's fix it by replacing snd_dma_isa_data() call with card->dev reference, and kill snd_dma_isa_data() definition. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | Merge branch 'for-linus' into for-nextTakashi Iwai2019-01-291-0/+6
| |\ \ \ \ | | | |/ / | | |/| | | | | | | | | | | | | | | | | Pull 5.0 branch for further development of USB-audio quirks Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | Merge tag 'asoc-fix-v5.0-rc2' of ↵Takashi Iwai2019-01-181-0/+6
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.0 Quite a big batch of fixes here. There's a couple of things going on, the main one is that we found some issues with not deferring probe when we should, causing us to skip some driver initialization. The fixes for this then in turn exposed some issues with how we were searching for components which had previously gone unnoticed due to the original issue. There's also been the normal driver specific stuff and there's been what looks like several batches of automated scanning for issues which have generated quite a large set of smaller fixes for potential crashes and missed error handling.
| * | \ \ \ Merge branch 'topic/pcm-lock-refactor' into for-nextTakashi Iwai2019-01-241-1/+2
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull PCM lock refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: pcm: More fine-grained PCM link lockingTakashi Iwai2019-01-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have currently two global locks, a rwlock and a rwsem, that are used for managing linking the PCM streams. Due to these global locks, once when a linked stream is used, the lock granularity suffers a lot. This patch attempts to eliminate the former global lock for atomic ops. The latter rwsem needs remaining because of the loosy way of the loop calls in snd_pcm_action_nonatomic(), as well as for avoiding the deadlock at linking. However, these are used far rarely, actually only by two actions (prepare and reset), where both are no timing critical ones. So this can be still seen as a good improvement. The basic strategy to eliminate the rwlock is to assure group->lock at adding or removing a stream to / from the group. Since we already takes the group lock whenever taking the all substream locks under the group, this shouldn't be a big problem. The reference to group pointer in snd_pcm_substream object is protected by the stream lock itself. However, there are still pitfalls: a race window at re-locking and the lifecycle of group object. The former is a small race window for dereferencing the substream group object opened while snd_pcm_action() performs re-locking to avoid ABBA deadlocks. This includes the unlink of group during that window, too. And the latter is the kfree performed after all streams are removed from the group while it's still dereferenced. For addressing these corner cases, two new tricks are introduced: - After re-locking, the group assigned to the stream is checked again; if the group is changed, we retry the whole procedure. - Introduce a refcount to snd_pcm_group object, so that it's freed only when it's empty and really no one refers to it. (Some readers might wonder why not RCU for the latter. RCU in this case would cost more than refcounting, unfortunately. We take the group lock sooner or later, hence the performance improvement by RCU would be negligible. Meanwhile, because we need to deal with schedulable context depending on the pcm->nonatomic flag, it'll become dynamic RCU/SRCU switch, and the grace period may become too long.) Along with these changes, there are a significant amount of code refactoring. The complex group re-lock & ref code is factored out to snd_pcm_stream_group_ref() function, for example. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: pcm: Make PCM linked list consistent while re-groupingTakashi Iwai2019-01-211-1/+0
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make a common helper to re-assign the PCM link using list_move() instead of open code with manual list_del() and list_add_tail(). This assures the consistency and we can get rid of snd_pcm_group.count field -- its purpose is only to check whether the list is singular, and we can know it by list_is_singular() call now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: pcm: Simplify proc file destructionTakashi Iwai2019-01-241-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The proc files are recursively freed by calling with the root snd_info_entry object, so we don't have to keep each object for releasing one by one. Move the release of the PCM stream proc root at the beginning, so that we can remove the redundant code and resource. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: pcm: Drop unused snd_pcm_substream.file fieldTakashi Iwai2019-01-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's assigned but nowhere used. Let's remove it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | Merge branch 'topic/pcm-device-suspend' into for-nextTakashi Iwai2019-01-181-5/+1
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull the PCM suspend improvement / cleanup. This moves the most of snd_pcm_suspend*() calls into PCM's own device PM ops. There should be no change from the functionality POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: pcm: Make snd_pcm_suspend() local staticTakashi Iwai2019-01-151-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | snd_pcm_suspend() is no longer called from outside, so let's make it local static. Also drop a superfluous NULL check there. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: pcm: Suspend streams globally via device type PM opsTakashi Iwai2019-01-151-0/+1
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now we rely on each driver calling snd_pcm_suspend*() explicitly at its own PM handling. However, this can be done far more easily by setting the PM ops to each actual snd_pcm device object. This patch adds the device_type object for PCM stream and assigns to each PCM stream object. The type contains only the PM ops for system suspend; we don't need to deal with the resume in general. The suspend hook simply calls snd_pcm_suspend_all() for the given PCM streams. This implies that the PM order is correctly put, i.e. PCM is suspended before the main (or codec) driver, which should be true in general. If a special ordering is needed, you'd need to adjust the device PM order manually later. This patch introduces a new flag, snd_pcm.no_device_suspend, too. With this flag set, the PCM device object won't invoke snd_pcm_suspend_all() by itself. This is needed for ASoC who wants to manage the PM call orders in its serialized way, and the flag is set in soc_new_pcm() as default. For the non-ASoC world, we can get rid of the manual snd_pcm_suspend calls. This will be done in the later patches. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda: add register offset for stripe controlSameer Pujar2019-01-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bits 16:17 in SD_CTL register refer to stripe control. Added an offset register(AZX_REG_SD_CTL_3B) to have exclusive read/write of corresponding register byte. This helps to avoid unnecessary 32-bit read/write of SD_CTL whenever only stripe or other bits of corresponding byte need to be updated. Also HD audio spec defines SD_CTL as 3 byte register. SD_CTL_STRIPE_MASK(0x3) can be used for stripe control programming and when updating AZX_REG_SD_CTL_3B. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda: Add api to program stripe control bitsSameer Pujar2019-01-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Controllers and codecs can support striping of audio out across multiple SDO lines. The number of supported SDO lines can be specific to chip. GCAP register can be read to know the maximum supported SDO lines. snd_hdac_get_stream_stripe_ctl() is exposed to program stripe bits on controller and codec side. stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines, etc., Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda: add verbs for stripe controlSameer Pujar2019-01-141-0/+2
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Controllers can support multiple Serial Data Out(SDO) lines, for extended outbound bandwidth, to pump data to all codecs on the link. Codecs can sample data present on SDO. Add verbs AC_VERB_GET_STRIPE_CONTROL and AC_VERB_SET_STRIPE_CONTROL These can be used to program usage of SDO lines for codec. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | / ASoC: dpcm: prevent snd_soc_dpcm use after freeKaiChieh Chuang2019-03-111-0/+2
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dpcm get from fe_clients/be_clients may be free before use Add a spin lock at snd_soc_card level, to protect the dpcm instance. The lock may be used in atomic context, so use spin lock. Use irq spin lock version, since the lock may be used in interrupts. possible race condition between void dpcm_be_disconnect( ... list_del(&dpcm->list_be); list_del(&dpcm->list_fe); kfree(dpcm); ... and for_each_dpcm_fe() for_each_dpcm_be*() race condition example Thread 1: snd_soc_dapm_mixer_update_power() -> soc_dpcm_runtime_update() -> dpcm_be_disconnect() -> kfree(dpcm); Thread 2: dpcm_fe_dai_trigger() -> dpcm_be_dai_trigger() -> snd_soc_dpcm_can_be_free_stop() -> if (dpcm->fe == fe) Excpetion Scenario: two FE link to same BE FE1 -> BE FE2 -> Thread 1: switch of mixer between FE2 -> BE Thread 2: pcm_stop FE1 Exception: Unable to handle kernel paging request at virtual address dead0000000000e0 pc=<> [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c sound/soc/soc-pcm.c:3226 if (dpcm->fe == fe) lr=<> [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c Backtrace: [<ffffff89602dba80>] notify_die+0x68/0xb8 [<ffffff896028c7dc>] die+0x118/0x2a8 [<ffffff89602a2f84>] __do_kernel_fault+0x13c/0x14c [<ffffff89602a27f4>] do_translation_fault+0x64/0xa0 [<ffffff8960280cf8>] do_mem_abort+0x4c/0xd0 [<ffffff8960282ad0>] el1_da+0x24/0x40 [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c [<ffffff8960e2edec>] dpcm_fe_dai_trigger+0x3c/0x44 [<ffffff8960de5588>] snd_pcm_do_stop+0x50/0x5c [<ffffff8960dded24>] snd_pcm_action+0xb4/0x13c [<ffffff8960ddfdb4>] snd_pcm_drop+0xa0/0x128 [<ffffff8960de69bc>] snd_pcm_common_ioctl+0x9d8/0x30f0 [<ffffff8960de1cac>] snd_pcm_ioctl_compat+0x29c/0x2f14 [<ffffff89604c9d60>] compat_SyS_ioctl+0x128/0x244 [<ffffff8960283740>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | ASoC: dmaengine: Remove unused SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME flagSylwester Nawrocki2019-02-141-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is now no users of this flag so remove it together with related code. The chan_name field of snd_dmaengine_dai_dma_data data structure is not removed as it is still in use by the PXA platform. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | ASoC: soc-acpi: remove new_mach_data fieldPierre-Louis Bossart2019-02-121-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We never used this field (or in older SOF implementations), let's remove it Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | ASoC: soc-acpi: remove asoc_plat_name fieldPierre-Louis Bossart2019-02-121-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This field was never used, let's remove it Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | ASoC: core: don't increase component module refcount unconditionallyPierre-Louis Bossart2019-02-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASoC core has for the longest time increased the module reference counts, even before the transition to the component model. This is probably fine on most platforms, but it introduces a deadlock case on Intel devices with the Skylake and SOF drivers which cannot be removed due to their reference counts being modified by the core. In these 2 cases, the PCI or ACPI driver .probe creates a platform device to let the machine driver .probe register the audio card. Conversely the PCI or ACPI driver .remove will unregister the platform device which results in the card being removed by the machine driver .remove. With ascii art, this can be represented as modprobe snd_soc_skl/ soc-pci-dev/sof-acpci-dev ----------> pci/acpi probe ^ | | ---------------| | | | | V V increase register register machine refcount component platform_device ^ | | | | V component <---- register card <---- probe probe The issue is that by playing with the component's module reference counts during the card registration, it's no longer possible to remove the module which controls the component. This can be shown, e.g. with the following error: root@plb-XPS-13-9350:~# lsmod | grep snd_soc_skl snd_soc_skl 110592 1 root@plb-XPS-13-9350:~# rmmod snd_soc_skl rmmod: ERROR: Module snd_soc_skl is in use Increasing the reference count during the component probe is not useful. If the PCI/ACPI module is removed, the card will be removed anyway. To avoid breaking existing platforms and allowing Intel platforms to safely deal with module load/unload cases, this patch introduces a flag which needs to be set during the component initialization. This is a strictly opt-in capability that should only be used when the handling of the component module does not require a reference count increase to prevent removal during use. Note that this solution is not directly applicable to the legacy Atom/SST driver, which uses a different device hierarchy. There are however additional refcount issues which prevent the ACPI driver from being removed. This is a different issue which would need a different patch. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | ASoC: cs35l36: Add support for Cirrus CS35L36 AmplifierJames Schulman2019-02-081-0/+43
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | Add driver support for Cirrus Logic CS35L36 boosted speaker amplifier Signed-off-by: James Schulman <james.schulman@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: dapm: harden use of lookup tablesPierre-Louis Bossart2019-02-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To detect potential errors, let's add: a) build-time warnings when the table size isn't aligned with the enum list b) run-time warnings when the values are not initialized. This requires an increase by one of all values to avoid the default 0. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: topology: unload physical dai link in removeBard liao2019-02-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | soc_tplg_link_config() will find the physical dai link and call soc_tplg_dai_link_load() to load the BE dai link. Currently remove_link() is only used to remove the FE dai link which is created by the topology. The BE dai link cannot however be unloaded in snd_soc_tplg_component _remove(), which is problematic if anything needs to be released or reinitialized. This patch aligns the definitions of dynamic types with the existing UAPI and adds a new remove_backend_link() routine to unload the the BE dai link when snd_soc_tplg_component_remove() is invoked. Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: dapm: Only power up active channels from a DAICharles Keepax2019-02-021-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently all widgets attached to a DAI link will be powered up when the DAI is active, however this may include routes that are not actually in use if there are unused channels available on the DAI. The macros for creating AIF widgets already include an entry for slot, it is proposed to change that to channel. The effective difference here being respresenting the logical channel index rather than the physical slot index. The CODECs currently using the slot entry on the DAPM_AIF macros are using it in a manner consistent with this, the CODECs not using it just have the field set to zero. A variable is added to snd_soc_dapm_widget to represent this channel index and then for each AIF widget attached to a DAI this is compared against the number of channels on the stream. Enabling the links for those which will be in use. This has the nice property that the CODECs which haven't used the slot/channel entry in the macro will function exactly as before due to all the AIF widgets having a channel of zero and a stream by definition having at least one channel. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: topology: add SND_SOC_DOBJ_GRAPH type for dapm routesRanjani Sridharan2019-01-292-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new dobj type SND_SOC_DOBJ_GRAPH for dapm routes and add snd_soc_dobj member to struct snd_soc_dapm_route. This enables device drivers to save driver specific data pertaining to dapm routes and also be able to clean up the data when the driver module is unloaded. Also, reorder the snd_soc_dobj_type types to align with matching topology header types. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: add helper to change platform name for all dailinksPierre-Louis Bossart2019-01-281-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reuse the same machine drivers with Atom/SST, Skylake and SOF, we need to change the default platform_name (or platforms->name in the "modern" representation). So far, this override was done with an automatic override, which was broken by a set of changes for DT platforms related to deferred probe handling. This automatic override is actually not really needed, the machine driver can already receive the platform name as a platform_data parameter. This is used e.g. for HDaudio support where we have different PCI aliases used for different platforms. We can reuse the same mechanism and modify the machine drivers to override the dailinks prior to registrating the card. This will require additional work for SOF, but with this helper it'll be just two lines of additional code per machine driver which is reused, not the end of the world. This helper can be simplified when all drivers have transitioned to the "modern" representation of dailinks. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: soc-acpi: add static inline fallbacks when CONFIG_ACPI=nPierre-Louis Bossart2019-01-281-7/+21
| | | | | | | | | | | | | | | | | | | | | Fix compilation issues reported by 0day-Kbuild with sparc64 w/ SOF. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: simple-card: rename to asoc_simple_card_canonicalize_platform()Kuninori Morimoto2019-01-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current simple-card is using asoc_simple_card_canonicalize_dailink(). Its naming is "dailink", but is for "platform". We already have asoc_simple_card_canonicalize_cpu() for "cpu", let's follow same naming rule. It never return error, so, void function is better idea. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: soc-core: add .num_platform for dai_linkKuninori Morimoto2019-01-212-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current snd_soc_dai_link is starting to use snd_soc_dai_link_component (= modern) style for Platform, but it is still assuming single Platform so far. We will need to have multi Platform support in the not far future. Currently only simple card is using it as sound card driver, and other drivers are converted to it from legacy style by snd_soc_init_platform(). To avoid future problem of multi Platform support, let's add num_platforms before it is too late. In the same time, to make it same naming mothed, "platform" should be "platforms". This patch fixup it too. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | ASoC: soc.h: add explanation of legacy/modern style of dai_linkKuninori Morimoto2019-01-181-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current ALSA SoC is assuming 1 CPU 1 Platform (= DMA) style system. Because of this background, it is directly using xxx_name / xxx_of_node / xxx_dai_name on dai_link. Let's call it as legacy style here. More complex style system like multi CPU multi Platform (= DMA) will coming. To supporting it, we can use snd_soc_dai_link_component on dai_link. Let's call it as modern style here. But current ALSA SoC can't support it so far. Thus, we need to have multi CPU / multi Codec / multi Platform style in the future on ALSA SoC. Currently we already have multi Codec support. Platform is starting to use modern style on dai_link, but still style only. Multi Platform is not yet implemented. And we still don't have multi CPU support on ALSA SoC, and not have modern style either. Currently, if driver is using legacy style Codec/Platform, it will be converted to modern style on soc-core. This means, we are using glue code for legacy vs modern style so far on ALSA SoC. We can fully switch to modern style on all drivers if ALSA SoC supported modern style for CPU, and then, legacy style code will be removed from ALSA SoC. Untile then, we need to keep both legacy/modern style and its glue code. This patch adds such future plan and background on soc.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge tag 'asoc-fix-v5.0-rc2' into asoc-5.1Mark Brown2019-01-181-0/+6
|\ \ \ | |/ / |/| / | |/ | | | | | | | | | | | | | | | | | | | | | | | | ASoC: Fixes for v5.0 Quite a big batch of fixes here. There's a couple of things going on, the main one is that we found some issues with not deferring probe when we should, causing us to skip some driver initialization. The fixes for this then in turn exposed some issues with how we were searching for components which had previously gone unnoticed due to the original issue. There's also been the normal driver specific stuff and there's been what looks like several batches of automated scanning for issues which have generated quite a large set of smaller fixes for potential crashes and missed error handling.
| * ASoC: soc-core: fix init platform memory handlingCurtis Malainey2019-01-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | snd_soc_init_platform initializes pointers to snd_soc_dai_link which is statically allocated and it does this by devm_kzalloc. In the event of an EPROBE_DEFER the memory will be freed and the pointers are left dangling. snd_soc_init_platform sees the dangling pointers and assumes they are pointing to initialized memory and does not reallocate them on the second probe attempt which results in a use after free bug since devm has freed the memory from the first probe attempt. Since the intention for snd_soc_dai_link->platform is that it can be set statically by the machine driver we need to respect the pointer in the event we did not set it but still catch dangling pointers. The solution is to add a flag to track whether the pointer was dynamically allocated or not. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selectionPierre-Louis Bossart2018-12-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For HDaudio and Skylake drivers, add module parameter "pci_binding" When pci_binding == 0 (AUTO), the PCI class/subclass info is used to select drivers based on the presence of the DSP. pci_binding == 1 (LEGACY) forces the use of the HDAudio legacy driver, even if the DSP is present. pci_binding == 2 (ASOC) forces the use of the ASOC driver. The information on the DSP presence is bypassed. The value for the module parameter needs to be identical for both drivers. This parameter is intended as a back-up solution if the automatic detection fails or when the DSP usage fails. Such cases should be reported on the alsa-devel mailing list for analysis. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: HDA: export process_unsol_events()Keyon Jie2018-12-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | The SOF implementation does not rely on the hdac_bus library, however for HDMI and HDaudio codec support it does need to deal with unsolicited events. Instead of re-inventing the wheel, export this symbol to reuse this part of the library directly. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>