summaryrefslogtreecommitdiffstats
path: root/kernel/sys.c
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] Make setsid() more robustEric W. Biederman2006-03-311-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core problem: setsid fails if it is called by init. The effect in 2.6.16 and the earlier kernels that have this problem is that if you do a "ps -j 1 or ps -ej 1" you will see that init and several of it's children have process group and session == 0. Instead of process group == session == 1. Despite init calling setsid. The reason it fails is that daemonize calls set_special_pids(1,1) on kernel threads that are launched before /sbin/init is called. The only remaining effect in that current->signal->leader == 0 for init instead of 1. And the setsid call fails. No one has noticed because /sbin/init does not check the return value of setsid. In 2.4 where we don't have the pidhash table, and daemonize doesn't exist setsid actually works for init. I care a lot about pid == 1 not being a special case that we leave broken, because of the container/jail work that I am doing. - Carefully allow init (pid == 1) to call setsid despite the kernel using its session. - Use find_task_by_pid instead of find_pid because find_pid taking a pidtype is going away. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sys_times: don't take tasklist_lockOleg Nesterov2006-03-281-12/+1
| | | | | | | | sys_times: don't take tasklist_lock Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] revert "Optimize sys_times for a single thread process"Oleg Nesterov2006-03-281-60/+26
| | | | | | | | | | | | This patch reverts 'CONFIG_SMP && thread_group_empty()' optimization in sys_times(). The reason is that the next patch breaks memory ordering which is needed for that optimization. tasklist_lock in sys_times() will be eliminated completely by further patch. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Notifier chain update: API changesAlan Stern2006-03-271-61/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Use unsigned int types for a faster bsearchEric Dumazet2006-03-251-2/+2
| | | | | | | | | | | | | | | | | | | | | This patch avoids arithmetic on 'signed' types that are slower than 'unsigned'. This saves space and cpu cycles. size of kernel/sys.o before the patch (gcc-3.4.5) text data bss dec hex filename 10924 252 4 11180 2bac kernel/sys.o size of kernel/sys.o after the patch text data bss dec hex filename 10903 252 4 11159 2b97 kernel/sys.o I noticed that gcc-4.1.0 (from Fedora Core 5) even uses idiv instruction for (a+b)/2 if a and b are signed. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] No need to protect current->group_info in sys_getgroups(), ↵Eric Dumazet2006-03-251-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in_group_p() and in_egroup_p() While doing some benchmarks of an Apache/PHP SMP server, I noticed high oprofile numbers in in_group_p() and _atomic_dec_and_lock(). rank percent 1 4.8911 % __link_path_walk 2 4.8503 % __d_lookup *3 4.2911 % _atomic_dec_and_lock 4 3.9307 % __copy_to_user_ll 5 4.9004 % sysenter_past_esp *6 3.3248 % in_group_p It appears that in_group_p() does an uncessary get_group_info(current->group_info); /* atomic_inc() */ ... /* access current->group_info */ put_group_info(current->group_info); /* _atomic_dec_and_lock */ It is not necessary to do this, because the current task holds a reference on its own group_info, and this reference cannot change during the lookup. This patch deletes the get_group_info()/put_group_info() pair from sys_getgroups(), in_group_p() and in_egroup_p() functions. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Tim Hockin <thockin@hockin.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] refactor capable() to one implementation, add __capable() helperChris Wright2006-03-251-12/+0
| | | | | | | | | | Move capable() to kernel/capability.c and eliminate duplicate implementations. Add __capable() function which can be used to check for capabiilty of any process. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] RLIMIT_CPU: document wrong return valueAndrew Morton2006-03-241-0/+7
| | | | | | | | | | | Document the fact that setrlimit(RLIMIT_CPU) doesn't return error codes when it should. I don't think we can fix this without a 2.7.x.. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] RLIMIT_CPU: fix handling of a zero limitAndrew Morton2006-03-241-1/+12
| | | | | | | | | | | | | | | | | | | | At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero seconds. But the spec says it should, and that's what 2.4.x does. Fixing this for real would involve some complexity (such as adding a new it-has-been-set flag to the task_struct, and testing that everwhere, instead of overloading the value of it_prof_expires). Given that a 2.4 kernel won't actually send the signal until one second has expired anyway, let's just handle this case by treating the caller's zero-seconds as one second. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sys_setrlimit() cleanupAndrew Morton2006-03-241-11/+15
| | | | | | | | | | | | | | | | | | | - Whitespace cleanups - Make that expression comprehensible. There's a potential logic change here: we do the "is it_prof_expires equal to zero" test after converting it to seconds, rather than doing the comparison between raw cputime_t's. But given that it's in units of seconds anyway, that shouldn't change anything. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: ttyIngo Molnar2006-03-231-2/+2
| | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Avoid taking global tasklist_lock for single threadedprocess at ↵Ravikiran G Thirumalai2006-03-231-8/+34
| | | | | | | | | | | | | | | getrusage() Avoid taking the global tasklist_lock when possible, if a process is single threaded during getrusage(). Any avoidance of tasklist_lock is good for NUMA boxes (and possibly for large SMPs). Thanks to Oleg Nesterov for review and suggestions. Signed-off-by: Nippun Goel <nippung@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kernel/sys.c NULL noise removalAl Viro2006-02-071-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
*---. [ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi ↵Len Brown2006-01-241-15/+10
|\ \ \ | | | | | | | | | | | | | | | | | | | | branches into release Signed-off-by: Len Brown <len.brown@intel.com>
| | * | [ACPI] fix reboot upon suspend-to-diskAlexey Starikovskiy2005-12-151-15/+10
| |/ / | | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=4320 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
* | | [PATCH] move capable() to capability.hRandy.Dunlap2006-01-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Move capable() from sched.h to capability.h; - Use <linux/capability.h> where capable() is used (in include/, block/, ipc/, kernel/, a few drivers/, mm/, security/, & sound/; many more drivers/ to go) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] uninline capable()Ingo Molnar2006-01-111-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Uninline capable(). Saves 2K of kernel text on a generic .config, and 1K on a tiny config. In addition it makes the use of capable more consistent between CONFIG_SECURITY and !CONFIG_SECURITY Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] simplify k_getrusage()Oleg Nesterov2006-01-081-18/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Factor out common code for different RUSAGE_xxx cases. Don't take ->sighand->siglock in RUSAGE_SELF case, suggested by Ravikiran G Thirumalai <kiran@scalex86.org>. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] setpgid: should not accept ptraced childsOleg Nesterov2006-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sys_setpgid() allows to change ->pgrp of ptraced childs. 'man setpgid' does not tell anything about that, so I consider this behaviour is a bug. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Oren Laadan <orenl@cs.columbia.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] setpgid: should work for sub-threadsOren Laadan2006-01-081-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | setsid() does not work unless the calling process is a thread_group_leader(). 'man setpgid' does not tell anything about that, so I consider this behaviour is a bug. Signed-off-by: Oren Laadan <orenl@cs.columbia.edu> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] setpgid: should work for sub-threadsOleg Nesterov2006-01-081-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | setpgid(0, pgid) or setpgid(forked_child_pid, pgid) does not work unless the calling process is a thread_group_leader(). 'man setpgid' does not tell anything about that, so I consider this behaviour is a bug. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Oren Laadan <orenl@cs.columbia.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] Don't attempt to power off if power off is not implementedEric W. Biederman2006-01-081-0/+6
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem. It is expected that /sbin/halt -p works exactly like /sbin/halt, when the kernel does not implement power off functionality. The kernel can do a lot of work in the reboot notifiers and in device_shutdown before we even get to machine_power_off. Some of that shutdown is not safe if you are leaving the power on, and it definitely gets in the way of using sysrq or pressing ctrl-alt-del. Since the shutdown happens in generic code there is no way to fix this in architecture specific code :( Some machines are kernel oopsing today because of this. The simple solution is to turn LINUX_REBOOT_CMD_POWER_OFF into LINUX_REBOOT_CMD_HALT if power_off functionality is not implemented. This has the unfortunate side effect of disabling the power off functionality on architectures that leave pm_power_off to null and still implement something in machine_power_off. And it will break the build on some architectures that don't have a pm_power_off variable at all. On both counts I say tough. For architectures like alpha that don't implement the pm_power_off variable pm_power_off is declared in linux/pm.h and it is a generic part of our power management code, and all architectures should implement it. For architectures like parisc that have a default power off method in machine_power_off if pm_power_off is not implemented or fails. It is easy enough to set the pm_power_off variable. And nothing bad happens there, the machines just stop powering off. The current semantics are impossible without a flag at the top level so we can avoid the problem code if a power off is not implemented. pm_power_off is as good a flag as any with the bonus that it works without modification on at least x86, x86_64, powerpc, and ppc today. Andrew can you pick this up and put this in the mm tree. Kernels that don't compile or don't power off seem saner than kernels that oops or panic. Until we get the arch specific patches for the problem architectures this probably isn't smart to push into the stable kernel. Unfortunately I don't have the time at the moment to walk through every architecture and make them work. And even if I did I couldn't test it :( From: Hirokazu Takata <takata@linux-m32r.org> Add pm_power_off() for build fix of arch/m32r/kernel/process.c. From: Miklos Szeredi <miklos@szeredi.hu> UML build fix Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* / [PATCH] kprobes: no probes on critical pathKeshavamurthy Anil S2005-12-121-1/+2
|/ | | | | | | | | | | | | For Kprobes critical path is the path from debug break exception handler till the control reaches kprobes exception code. No probes can be supported in this path as we will end up in recursion. This patch prevents this by moving the below function to safe __kprobes section onto which no probes can be inserted. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SPARC64]: Re-export uts_sem for solaris compat module.David S. Miller2005-11-101-0/+2
| | | | | | Revert: b26b9bc58263acda274f82a9dde8b6d96559878a Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] unexport uts_semAdrian Bunk2005-11-071-2/+0
| | | | | | | | I didn't find any possible modular usage in the kernel. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kernel-docs: fix kernel-doc format problemsRandy Dunlap2005-11-071-1/+1
| | | | | | | | | | | | | | | Convert to proper kernel-doc format. Some have extra blank lines (not allowed immed. after the function name) or need blank lines (after all parameters). Function summary must be only one line. Colon (":") in a function description does weird things (causes kernel-doc to think that it's a new section head sadly). Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] more kernel-doc cleanups, additionsRandy Dunlap2005-11-071-6/+9
| | | | | | | | | | | Various core kernel-doc cleanups: - add missing function parameters in ipc, irq/manage, kernel/sys, kernel/sysctl, and mm/slab; - move description to just above function for kernel_restart() Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Process Events ConnectorMatt Helsley2005-11-071-0/+9
| | | | | | | | | | | | This patch adds a connector that reports fork, exec, id change, and exit events for all processes to userspace. It replaces the fork_advisor patch that ELSA is currently using. Applications that may find these events useful include accounting/auditing (e.g. ELSA), system activity monitoring (e.g. top), security, and resource management (e.g. CKRM). Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] reboot: comment and factor the main reboot functionsEric W. Biederman2005-09-221-6/+46
| | | | | | | | | | | | | | In the lead up to 2.6.13 I fixed a large number of reboot problems by making the calling conventions consistent. Despite checking and double checking my work it appears I missed an obvious one. This first patch simply refactors the reboot routines so all of the preparation for various kinds of reboots are in their own functions. Making it very hard to get the various kinds of reboot out of sync. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PR_GET_DUMPABLE returns incorrect infoMichael Kerrisk2005-09-171-2/+1
| | | | | | | | | | | | | | | | | | 2.6.13 incorporated Alan Cox's patch for /proc/sys/fs/suid_dumpable (one version of this patch can be found here http://marc.theaimsgroup.com/?l=linux-kernel&m=109647550421014&w=2 ). This patch also made corresponding changes in kernel/sys.c to change the prctl() PR_SET_DUMPABLE operation so that the permitted range of 'arg2' was modified from 0..1 to 0..2. However, a corresponding change was not made for PR_GET_DUMPABLE: if the dumpable flag is non-zero, then PR_GET_DUMPABLE always returns 1, so that the caller can't determine the true setting of this flag. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove a redundant variable in sys_prctl()Jesper Juhl2005-09-071-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch removes a redundant variable `sig' from sys_prctl(). For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG then the value of arg2 is assigned to an int variable named sig. Then sig is tested with valid_signal() and later used to set the value of current->pdeath_signal . There is no reason to use this intermediate variable since valid_signal() takes a unsigned long argument, so it can handle being passed arg2 directly, and if the call to valid_signal is OK, then we know the value of arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int and thus there's no problem assigning it later to current->pdeath_signal (which is an int). The patch gets rid of the pointless variable `sig'. This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my system. Patch has been compile tested, boot tested, and just to make damn sure I didn't break anything I wrote a quick test app that calls prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a unsigned long, and it behaves as expected with and without the patch. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Remove suspend() calls from shutdown pathBenjamin Herrenschmidt2005-08-041-2/+0
| | | | | | | | | | | | | | | | | | | | | This removes the calls to device_suspend() from the shutdown path that were added sometime during 2.6.13-rc*. They aren't working properly on a number of configs (I got reports from both ppc powerbook users and x86 users) causing the system to not shutdown anymore. I think it isn't the right approach at the moment anyway. We have already a shutdown() callback for the drivers that actually care about shutdown and the suspend() code isn't yet in a good enough shape to be so much generalized. Also, the semantics of suspend and shutdown are slightly different on a number of setups and the way this was patched in provides little way for drivers to cleanly differenciate. It should have been at least a different message. For 2.6.13, I think we should revert to 2.6.12 behaviour and have a working suspend back. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] reboot: remove device_suspend(PMSG_FREEZE) from kernel_kexecEric W. Biederman2005-07-291-1/+0
| | | | | | | | | If device_suspend(PMSG_FREEZE) is not ready to be called in kernel_restart it is definitely not ready to be called in the even more fickle kernel_kexec. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Avoid device suspend on rebootAndrew Morton2005-07-271-1/+0
| | | | | | | My fairly ordinary x86 test box gets stuck during reboot on the wait_for_completion() in ide_do_drive_cmd(): Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Add emergency_restart()Eric W. Biederman2005-07-261-0/+6
| | | | | | | | | | | | | | | | | | When the kernel is working well and we want to restart cleanly kernel_restart is the function to use. But in many instances the kernel wants to reboot when thing are expected to be working very badly such as from panic or a software watchdog handler. This patch adds the function emergency_restart() so that callers can be clear what semantics they expect when calling restart. emergency_restart() is expected to be callable from interrupt context and possibly reliable in even more trying circumstances. This is an initial generic implementation for all architectures. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Make ctrl_alt_del call kernel_restart to get a proper reboot.Eric W. Biederman2005-07-261-2/+1
| | | | | | | | | It is obvious we wanted to call kernel_restart here but since we don't have it the code was expanded inline and hasn't been correct since sometime in 2.4. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Refactor sys_reboot into reusable partsEric W. Biederman2005-07-261-42/+64
| | | | | | | | | | | Because the factors of sys_reboot don't exist people calling into the reboot path duplicate the code badly, leading to inconsistent expectations of code in the reboot path. This patch should is just code motion. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Add missing device_suspsend(PMSG_FREEZE) calls.Eric W. Biederman2005-07-261-0/+2
| | | | | | | | In the recent addition of device_suspend calls into sys_reboot two code paths were missed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kexec: add kexec syscallsEric W. Biederman2005-06-251-0/+20
| | | | | | | | | | | | | | | | | | | | This patch introduces the architecture independent implementation the sys_kexec_load, the compat_sys_kexec_load system calls. Kexec on panic support has been integrated into the core patch and is relatively clean. In addition the hopefully architecture independent option crashkernel=size@location has been docuemented. It's purpose is to reserve space for the panic kernel to live, and where no DMA transfer will ever be setup to access. Signed-off-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] properly stop devices before poweroffPavel Machek2005-06-251-0/+3
| | | | | | | | | Without this patch, Linux provokes emergency disk shutdowns and similar nastiness. It was in SuSE kernels for some time, IIRC. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Keys: Make request-key create an authorisation keyDavid Howells2005-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Optimize sys_times for a single thread processChristoph Lameter2005-06-231-26/+60
| | | | | | | | | | | | Avoid taking the tasklist_lock in sys_times if the process is single threaded. In a NUMA system taking the tasklist_lock may cause a bouncing cacheline if multiple independent processes continually call sys_times to measure their performance. Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] setuid core dumpAlan Cox2005-06-231-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] correctly name the Shell sortDomen Puncer2005-05-051-1/+1
| | | | | | | | | | As per http://www.nist.gov/dads/HTML/shellsort.html, this should be referred to as a Shell sort. Shell-Metzner is a misnomer. Signed-off-by: Daniel Dickman <didickman@yahoo.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] convert that currently tests _NSIG directly to use valid_signal()Jesper Juhl2005-05-011-1/+2
| | | | | | | | | Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] nice and rt-prio rlimitsMatt Mackall2005-05-011-1/+1
| | | | | | | | | | | | | | | | | | | | Add a pair of rlimits for allowing non-root tasks to raise nice and rt priorities. Defaults to traditional behavior. Originally written by Chris Wright. The patch implements a simple rlimit ceiling for the RT (and nice) priorities a task can set. The rlimit defaults to 0, meaning no change in behavior by default. A value of 50 means RT priority levels 1-50 are allowed. A value of 100 means all 99 privilege levels from 1 to 99 are allowed. CAP_SYS_NICE is blanket permission. (akpm: see http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.1/1921.html for tips on integrating this with PAM). Signed-off-by: Matt Mackall <mpm@selenic.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] use smp_mb/wmb/rmb where possibleakpm@osdl.org2005-05-011-10/+10
| | | | | | | | | Replace a number of memory barriers with smp_ variants. This means we won't take the unnecessary hit on UP machines. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+1725
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 00:04:38 +0000