summaryrefslogtreecommitdiffstats
path: root/net/can
Commit message (Collapse)AuthorAgeFilesLines
* can: bcm: check timer values before ktime conversionOliver Hartkopp2019-01-221-0/+27
| | | | | | | | | | | | | | | | | | | | Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup() when the conversion into ktime multiplies the given value with NSEC_PER_USEC (1000). Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2 Add a check for the given tv_usec, so that the value stays below one second. Additionally limit the tv_sec value to a reasonable value for CAN related use-cases of 400 days and ensure all values to be positive. Reported-by: Kyungtae Kim <kt0755@gmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= 2.6.26 Tested-by: Kyungtae Kim <kt0755@gmail.com> Acked-by: Andre Naujoks <nautsch2@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: gw: ensure DLC boundaries after CAN frame modificationOliver Hartkopp2019-01-071-3/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Michael Kubecek suggested to drop frames that have a DLC exceeding the available space after the modification process and provided a patch that can handle CAN FD frames too. Within this patch we also limit the length for the checksum calculations to the maximum of Classic CAN data length (8). CAN frames that are dropped by these additional checks are counted with the CGW_DELETED counter which indicates misconfigurations in can-gw rules. This fixes CVE-2019-3701. Reported-by: Muyu Yu <ieatmuttonchuan@gmail.com> Reported-by: Marcus Meissner <meissner@suse.de> Suggested-by: Michal Kubecek <mkubecek@suse.cz> Tested-by: Muyu Yu <ieatmuttonchuan@gmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= v3.2 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add missing SOF_TIMESTAMPING_OPT_ID supportWillem de Bruijn2018-12-171-1/+1
| | | | | | | | | | | | | SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets. But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN. Add skb_setup_tx_timestamp that configures both tx_flags and tskey for these paths that do not need corking or use bytestream keys. Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: raw: check for CAN FD capable netdev in raw_sendmsg()Oliver Hartkopp2018-11-091-7/+8
| | | | | | | | | | | | | When the socket is CAN FD enabled it can handle CAN FD frame transmissions. Add an additional check in raw_sendmsg() as a CAN2.0 CAN driver (non CAN FD) should never see a CAN FD frame. Due to the commonly used can_dropped_invalid_skb() function the CAN 2.0 driver would drop that CAN FD frame anyway - but with this patch the user gets a proper -EINVAL return code. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds2018-06-282-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* treewide: kzalloc() -> kcalloc()Kees Cook2018-06-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* treewide: kmalloc() -> kmalloc_array()Kees Cook2018-06-121-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* Merge branch 'work.aio-1' of ↵Linus Torvalds2018-06-042-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
| * net: convert datagram_poll users tp ->poll_maskChristoph Hellwig2018-05-262-2/+2
| | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | proc: introduce proc_create_net_singleChristoph Hellwig2018-05-162-118/+25
| | | | | | | | | | | | | | | | | | Variant of proc_create_data that directly take a seq_file show callback and deals with network namespaces in ->open and ->release. All callers of proc_create + single_open_net converted over, and single_{open,release}_net are removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de>
* | net/can: single_open_net needs to be paired with single_release_netChristoph Hellwig2018-05-142-4/+4
|/ | | | | | Otherwise we will leak a reference to the network namespace. Signed-off-by: Christoph Hellwig <hch@lst.de>
* net: Drop pernet_operations::asyncKirill Tkhai2018-03-273-3/+0
| | | | | | | | Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Use octal not symbolic permissionsJoe Perches2018-03-262-2/+2
| | | | | | | | | | | | | | Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert can_pernet_opsKirill Tkhai2018-03-221-0/+1
| | | | | | | | | | | | | | | | | These pernet_operations create and destroy /proc entries and cancel per-net timer. Also, there are unneed iterations over empty list of net devices, since all net devices must be already moved to init_net or unregistered by default_device_ops. This already was mentioned here: https://marc.info/?l=linux-can&m=150169589119335&w=2 So, it looks safe to make them async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert cangw_pernet_opsKirill Tkhai2018-03-051-0/+1
| | | | | | | | | | | | | These pernet_operations have a deal with cgw_list, and the rest of accesses are made under rtnl_lock(). The only exception is cgw_dump_jobs(), which is accessed under rcu_read_lock(). cgw_dump_jobs() is called on netlink request, and it does not seem, foreign pernet_operations want to send a net such the messages. So, we mark them as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert /proc creating and destroying pernet_operationsKirill Tkhai2018-02-271-0/+1
| | | | | | | | | | | | | | | | These pernet_operations just create and destroy /proc entries, and they can safely marked as async: pppoe_net_ops vlan_net_ops canbcm_pernet_ops kcm_net_ops pfkey_net_ops pppol2tp_net_ops phonet_net_ops Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: make getname() functions return length rather than use int* parameterDenys Vlasenko2018-02-121-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* can: migrate documentation to restructured textRobert Schwebel2018-01-261-1/+1
| | | | | | | | | | | | The kernel documentation is now restructured text. Convert the SocketCAN documentation and include it in the toplevel kernel documentation. This patch doesn't do any content change. All references to can.txt in the code are converted to can.rst. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-01-191-22/+14
|\ | | | | | | | | | | | | | | | | | | | | The BPF verifier conflict was some minor contextual issue. The TUN conflict was less trivial. Cong Wang fixed a memory leak of tfile->tx_array in 'net'. This is an skb_array. But meanwhile in net-next tun changed tfile->tx_arry into tfile->tx_ring which is a ptr_ring. Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_onceMarc Kleine-Budde2018-01-181-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an invalid CANFD frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com Suggested-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_onceMarc Kleine-Budde2018-01-181-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an invalid CAN frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+4386709c0c1284dca827@syzkaller.appspotmail.com Suggested-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | net: delete /proc THIS_MODULE referencesAlexey Dobriyan2018-01-162-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | /proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | can: af_can: give struct holding the CAN per device receive lists a sensible ↵Marc Kleine-Budde2018-01-053-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | name This patch adds a "can_" prefix to the "struct dev_rcv_lists" to better reflect the meaning and improbe code readability. The conversion is done with: sed -i \ -e "s/struct dev_rcv_lists/struct can_dev_rcv_lists/g" \ net/can/*.[ch] include/net/netns/can.h Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: raw: raw_bind(): bail out if can_family is not AF_CANMarc Kleine-Budde2018-01-051-0/+2
| | | | | | | | | | | | | | | | Until now CAN raw's bind() doesn't check if the can_familiy in the struct sockaddr_can is set to AF_CAN. This patch adds the missing check. Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | net: use rtnl_register_module where neededFlorian Westphal2017-12-041-4/+10
|/ | | | | | | | | all of these can be compiled as a module, so use new _module version to make sure module can no longer be removed while callback/dump is in use. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook2017-11-211-2/+2
| | | | | | | | | | | | | | | | With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <keescook@chromium.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-11-041-0/+1
|\ | | | | | | | | | | | | Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-10-222-6/+19
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: af_can: can_pernet_init(): add missing error handling for kzalloc ↵Marc Kleine-Budde2017-10-191-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | returning NULL This patch adds the missing check and error handling for out-of-memory situations, when kzalloc cannot allocate memory. Fixes: cb5635a36776 ("can: complete initial namespace support") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: af_can: do not access proto_tab directly use rcu_access_pointer insteadMarc Kleine-Budde2017-10-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "proto_tab" is a RCU protected array, when directly accessing the array, sparse throws these warnings: CHECK /srv/work/frogger/socketcan/linux/net/can/af_can.c net/can/af_can.c:115:14: error: incompatible types in comparison expression (different address spaces) net/can/af_can.c:795:17: error: incompatible types in comparison expression (different address spaces) net/can/af_can.c:816:9: error: incompatible types in comparison expression (different address spaces) This patch fixes the problem by using rcu_access_pointer() and annotating "proto_tab" array as __rcu. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: bcm: check for null sk before deferencing it via the call to sock_netColin Ian King2017-10-191-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The assignment of net via call sock_net will dereference sk. This is performed before a sanity null check on sk, so there could be a potential null dereference on the sock_net call if sk is null. Fix this by assigning net after the sk null check. Also replace the sk == NULL with the more usual !sk idiom. Detected by CoverityScan CID#1431862 ("Dereference before null check") Fixes: 384317ef4187 ("can: network namespace support for CAN_BCM protocol") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | net: can: Convert timers to use timer_setup()Kees Cook2017-10-183-7/+7
|/ | | | | | | | | | | | | | In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* rtnetlink: make rtnl_register accept a flags parameterFlorian Westphal2017-08-091-3/+3
| | | | | | | | | | | | This change allows us to later indicate to rtnetlink core that certain doit functions should be called without acquiring rtnl_mutex. This change should have no effect, we simply replace the last (now unused) calcit argument with the new flag. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* networking: introduce and use skb_put_data()Johannes Berg2017-06-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: af_can: namespace support: fix lockdep splat: properly initialize spin_lockMarc Kleine-Budde2017-06-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses spin_lock_init() instead of __SPIN_LOCK_UNLOCKED() to initialize the per namespace net->can.can_rcvlists_lock lock to fix this lockdep warning: | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 186 Comm: candump Not tainted 4.12.0-rc3+ #47 | Hardware name: Marvell Kirkwood (Flattened Device Tree) | [<c0016644>] (unwind_backtrace) from [<c00139a8>] (show_stack+0x18/0x1c) | [<c00139a8>] (show_stack) from [<c0058c8c>] (register_lock_class+0x1e4/0x55c) | [<c0058c8c>] (register_lock_class) from [<c005bdfc>] (__lock_acquire+0x148/0x1990) | [<c005bdfc>] (__lock_acquire) from [<c005deec>] (lock_acquire+0x174/0x210) | [<c005deec>] (lock_acquire) from [<c04a6780>] (_raw_spin_lock+0x50/0x88) | [<c04a6780>] (_raw_spin_lock) from [<bf02116c>] (can_rx_register+0x94/0x15c [can]) | [<bf02116c>] (can_rx_register [can]) from [<bf02a868>] (raw_enable_filters+0x60/0xc0 [can_raw]) | [<bf02a868>] (raw_enable_filters [can_raw]) from [<bf02ac14>] (raw_enable_allfilters+0x2c/0xa0 [can_raw]) | [<bf02ac14>] (raw_enable_allfilters [can_raw]) from [<bf02ad38>] (raw_bind+0xb0/0x250 [can_raw]) | [<bf02ad38>] (raw_bind [can_raw]) from [<c03b5fb8>] (SyS_bind+0x70/0xac) | [<c03b5fb8>] (SyS_bind) from [<c000f8c0>] (ret_fast_syscall+0x0/0x1c) Cc: Mario Kicherer <dev@kicherer.org> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: fix CAN BCM build with CONFIG_PROC_FS disabledOliver Hartkopp2017-04-271-8/+13
| | | | | | | | | | | | | | | | | | | | The introduced namespace support moved the BCM variables for procfs into a per-net data structure. This leads to a build failure with disabled procfs: on x86_64: when CONFIG_PROC_FS is not enabled: ../net/can/bcm.c:1541:14: error: 'struct netns_can' has no member named 'bcmproc_dir' ../net/can/bcm.c:1601:14: error: 'struct netns_can' has no member named 'bcmproc_dir' ../net/can/bcm.c:1696:11: error: 'struct netns_can' has no member named 'bcmproc_dir' ../net/can/bcm.c:1707:15: error: 'struct netns_can' has no member named 'bcmproc_dir' http://marc.info/?l=linux-can&m=149321842526524&w=2 Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: network namespace support for CAN gatewayOliver Hartkopp2017-04-251-28/+44
| | | | | | | | | The CAN gateway was not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch enables the CAN gateway to be used in different namespaces. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: network namespace support for CAN_BCM protocolOliver Hartkopp2017-04-251-33/+57
| | | | | | | | | The CAN_BCM protocol and its procfs entries were not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch adds the missing per-net functionality for the CAN BCM. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: complete initial namespace supportOliver Hartkopp2017-04-253-103/+114
| | | | | | | | | The statistics and its proc output was not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch adds the missing per-net statistics for the CAN subsystem. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: remove obsolete definitionsOliver Hartkopp2017-04-251-4/+0
| | | | | | | | can_rx_alldev_list is a per-net data structure now. Remove it's definition here and can_rx_dev_list too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: remove obsolete pernet_operations definitionsOliver Hartkopp2017-04-251-4/+0
| | | | | | | | | The namespace support for the CAN subsystem does not need any additional memory. So when ".size = 0" there's no extra memory allocated by the system. And therefore ".id" is obsolete too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: fix memory leak in initial namespace supportOliver Hartkopp2017-04-251-0/+2
| | | | | | | | The can_rx_alldev_list is a per-net data structure now and allocated in can_pernet_init(). Make sure the memory is free'd in can_pernet_exit() too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* net: rtnetlink: plumb extended ack to doit functionDavid Ahern2017-04-171-2/+4
| | | | | | | | | | | | Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: pass extended ACK struct to parsing functionsJohannes Berg2017-04-131-1/+1
| | | | | | | | | Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: initial support for network namespacesMario Kicherer2017-04-046-176/+203
| | | | | | | | | | | | | | | | | | This patch adds initial support for network namespaces. The changes only enable support in the CAN raw, proc and af_can code. GW and BCM still have their checks that ensure that they are used only from the main namespace. The patch boils down to moving the global structures, i.e. the global filter list and their /proc stats, into a per-namespace structure and passing around the corresponding "struct net" in a lot of different places. Changes since v1: - rebased on current HEAD (2bfe01e) - fixed overlong line Signed-off-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: bcm: fix hrtimer/tasklet termination in bcm op removalOliver Hartkopp2017-01-301-7/+16
| | | | | | | | | | | | When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by: Michael Josenhans <michael.josenhans@web.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Michael Josenhans <michael.josenhans@web.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: Fix kernel panic at security_sock_rcv_skbEric Dumazet2017-01-295-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ktime: Cleanup ktime_set() usageThomas Gleixner2016-12-251-2/+2
| | | | | | | | | | ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
* ktime: Get rid of the unionThomas Gleixner2016-12-252-15/+15
| | | | | | | | | | | | | | | ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 09:19:28 +0000