summaryrefslogtreecommitdiffstats
path: root/net/ipv4/ipip.c
Commit message (Collapse)AuthorAgeFilesLines
* fou: Fix typo in returning flags in netlinkTom Herbert2014-11-051-1/+1
| | | | | | | | When filling netlink info, dport is being returned as flags. Fix instances to return correct value. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: better IFF_XMIT_DST_RELEASE supportEric Dumazet2014-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: Set inner IP protocol in ipipTom Herbert2014-10-011-0/+2
| | | | | | | | | Call skb_set_inner_ipproto to set inner IP protocol to IPPROTO_IPV4 before tunnel_xmit. This is needed if UDP encapsulation (fou) is being done. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: Setup and TX path for ipip/UDP foo-over-udp encapsulationTom Herbert2014-09-191-1/+77
| | | | | | | | | Add netlink handling for IP tunnel encapsulation parameters and and adjustment of MTU for encapsulation. ip_tunnel_encap is called from ip_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-06-111-2/+2
|\ | | | | | | | | | | | | | | | | | | Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipip, sit: fix ipv4_{update_pmtu,redirect} callsDmitry Popov2014-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | ipv4_{update_pmtu,redirect} were called with tunnel's ifindex (t->dev is a tunnel netdevice). It caused wrong route lookup and failure of pmtu update or redirect. We should use the same ifindex that we use in ip_route_output_* in *tunnel_xmit code. It is t->parms.link . Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: tunnels - enable module autoloadingTom Gundersen2014-05-211-0/+1
|/ | | | | | | | | | Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: be friend with drop monitorEric Dumazet2014-01-181-1/+1
| | | | | | | | Replace some dev_kfree_skb() with kfree_skb() calls when we drop one skb, this might help bug tracking. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: add GSO/TSO supportEric Dumazet2013-10-191-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now inet_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for IPIP Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO IPIP support) : Before patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3357.88 5.09 3.70 2.983 2.167 After patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 7710.19 4.52 6.62 1.152 1.687 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-09-051-3/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv4 tunnels: fix an oops when using ipip/sit with IPsecLi Hongjun2013-08-301-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 3d7b46cd20e3 (ip_tunnel: push generic protocol handling to ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on an IPv4 over IPv4 tunnel. xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb). Signed-off-by: Li Hongjun <hongjun.li@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipip: add x-netns supportNicolas Dichtel2013-08-151-2/+1
|/ | | | | | | | | | | | | This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: fix a regression in ioctlCong Wang2013-07-021-5/+7
| | | | | | | | | | | | | | | | | | | | This is a regression introduced by commit fd58156e456d9f68fe0448 (IPIP: Use ip-tunneling code.) Similar to GRE tunnel, previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. Also, the check for i_key, o_key etc. is suspicious too, which did not exist before, reset them before passing to ip_tunnel_ioctl(). Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip_tunnel: push generic protocol handling to ip_tunnel module.Pravin B Shelar2013-06-191-1/+5
| | | | | | | | Process skb tunnel header before sending packet to protocol handler. this allows code sharing between gre and ovs gre modules. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* iptunnel: specify protocol outside IP headerNicolas Dichtel2013-05-311-1/+1
| | | | | | | | | | Before this patch, ip_tunnel_xmit() was using the field protocol from the IP header passed into argument. There is no functional change, this patch prepares the support of IPv4 over IPv4 for module sit. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPIP: Use ip-tunneling code.Pravin B Shelar2013-03-261-690/+56
| | | | | | | | Reuse common ip-tunneling code which is re-factored from GRE module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* GRE: Refactor GRE tunneling code.Pravin B Shelar2013-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tunnel: use iptunnel_xmit() againCong Wang2013-03-101-17/+1
| | | | | | | | | | | | | | | | With recent patches from Pravin, most tunnels can't use iptunnel_xmit() any more, due to ip_select_ident() and skb->ip_summed. But we can just move these operations out of iptunnel_xmit(), so that tunnels can use it again. This by the way fixes a bug in vxlan (missing nf_reset()) for net-next. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: capture inner headers during encapsulationPravin B Shelar2013-03-091-6/+7
| | | | | | | Allow IPIP to make use of tx-checksum offloading. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: Use tunnel_ip_select_ident() for tunnel IP-Identification.Pravin B Shelar2013-03-091-1/+20
| | | | | | | | tunnel_ip_select_ident() is more efficient when generating ip-header id given inner packet is of ipv4 type. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix possible wrong checksum generationEric Dumazet2013-01-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pravin Shelar mentioned that GSO could potentially generate wrong TX checksum if skb has fragments that are overwritten by the user between the checksum computation and transmit. He suggested to linearize skbs but this extra copy can be avoided for normal tcp skbs cooked by tcp_sendmsg(). This patch introduces a new SKB_GSO_SHARED_FRAG flag, set in skb_shinfo(skb)->gso_type if at least one frag can be modified by the user. Typical sources of such possible overwrites are {vm}splice(), sendfile(), and macvtap/tun/virtio_net drivers. Tested: $ netperf -H 7.7.8.84 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3959.52 $ netperf -H 7.7.8.84 -t TCP_SENDFILE TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3216.80 Performance of the SENDFILE is impacted by the extra allocation and copy, and because we use order-0 pages, while the TCP_STREAM uses bigger pages. Reported-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Allow userns root to control ipv4Eric W. Biederman2012-11-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow creating raw sockets. Allow the SIOCSARP ioctl to control the arp cache. Allow the SIOCSIFFLAG ioctl to allow setting network device flags. Allow the SIOCSIFADDR ioctl to allow setting a netdevice ipv4 address. Allow the SIOCSIFBRDADDR ioctl to allow setting a netdevice ipv4 broadcast address. Allow the SIOCSIFDSTADDR ioctl to allow setting a netdevice ipv4 destination address. Allow the SIOCSIFNETMASK ioctl to allow setting a netdevice ipv4 netmask. Allow the SIOCADDRT and SIOCDELRT ioctls to allow adding and deleting ipv4 routes. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting gre tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipip tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipsec virtual tunnel interfaces. Allow setting the MRT_INIT, MRT_DONE, MRT_ADD_VIF, MRT_DEL_VIF, MRT_ADD_MFC, MRT_DEL_MFC, MRT_ASSERT, MRT_PIM, MRT_TABLE socket options on multicast routing sockets. Allow setting and receiving IPOPT_CIPSO, IP_OPT_SEC, IP_OPT_SID and arbitrary ip options. Allow setting IP_SEC_POLICY/IP_XFRM_POLICY ipv4 socket option. Allow setting the IP_TRANSPARENT ipv4 socket option. Allow setting the TCP_REPAIR socket option. Allow setting the TCP_CONGESTION socket option. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: fix sparse warnings in ipip_netlink_parms()Nicolas Dichtel2012-11-151-2/+2
| | | | | | | | | | This change fixes two sparse warnings triggered by casting the ip addresses from netlink messages in an u32 instead of be32. This change corrects that in order to resolve the sparse warnings. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: add support of link creation via rtnlNicolas Dichtel2012-11-141-24/+141
| | | | | | | This patch add the support of 'ip link .. type ipip'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip/rtnl: add IFLA_IPTUN_PMTUDISC on dumpNicolas Dichtel2012-11-141-1/+5
| | | | | | | This parameter was missing in the dump. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: always notify change when params are updatedNicolas Dichtel2012-11-141-18/+16
| | | | | | | | | | | netdev_state_change() was called only when end points or link was updated. Now that all parameters are advertised via netlink, we must advertise any change. This patch also prepares the support of ipip tunnels management via rtnl. The code which update tunnels will be put in a new function. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: unify for_each_ip_tunnel_rcu()Amerigo Wang2012-11-141-10/+3
| | | | | | | | | The defitions of for_each_ip_tunnel_rcu() are same, so unify it. Also, don't hide the parameter 't'. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert __IPTUNNEL_XMIT() to an inline functionAmerigo Wang2012-11-141-13/+1
| | | | | | | | | | | __IPTUNNEL_XMIT() is an ugly macro, convert it to a static inline function, so make it more readable. IPTUNNEL_XMIT() is unused, just remove it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: advertise tunnel param via rtnlNicolas Dichtel2012-11-091-1/+56
| | | | | | | | | | | | It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: add GSO supportEric Dumazet2012-11-091-0/+12
| | | | | | | | | | | | | | | In commit 6b78f16e4b (gre: add GSO support) we added GSO support to GRE tunnels. This patch does the same for IPIP tunnels. Performance of single TCP flow over an IPIP tunnel is increased by 40% Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tunnel: drop packet if ECN present with not-ECTstephen hemminger2012-09-271-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux tunnels were written before RFC6040 and therefore never implemented the corner case of ECN getting set in the outer header and the inner header not being ready for it. Section 4.2. Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. This patch moves the ECN decap logic out of the individual tunnels into a common place. It also adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Overloads rx_frame_error to keep track of ECN related error. Thanks to Chris Wright who caught this while reviewing the new VXLAN tunnel. This code was tested by injecting faulty logic in other end GRE to send incorrectly encapsulated packets. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: remove extranous rcu_read_lockstephen hemminger2012-09-271-8/+1
| | | | | | | | The handlers for xfrm_tunnel are always invoked with rcu read lock already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Adjust semantics of rt->rt_gateway.David S. Miller2012-07-201-1/+1
| | | | | | | | | | | | | | | | | In order to allow prefixed routes, we have to adjust how rt_gateway is set and interpreted. The new interpretation is: 1) rt_gateway == 0, destination is on-link, nexthop is iph->daddr 2) rt_gateway != 0, destination requires a nexthop gateway Abstract the fetching of the proper nexthop value using a new inline helper, rt_nexthop(), as suggested by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
* net: Pass optional SKB and SK arguments to dst_ops->{update_pmtu,redirect}()David S. Miller2012-07-171-1/+1
| | | | | | | | | | | | | | | | This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Add redirect support to all protocol icmp error handlers.David S. Miller2012-07-111-0/+9
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Handle PMTU in all ICMP error handlers.David S. Miller2012-06-141-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: fix checkpatch errorsDaniel Baluta2012-04-151-2/+2
| | | | | | | | | Fix checkpatch errors of the following type: * ERROR: "foo * bar" should be "foo *bar" * ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tunnel: implement 64 bits statisticsstephen hemminger2012-04-141-18/+35
| | | | | | | | Convert the per-cpu statistics kept for GRE, IPIP, and SIT tunnels to use 64 bit statistics. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert printks to pr_<level>Joe Perches2012-03-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: Fix bug added to ipip_tunnel_xmit().David S. Miller2012-01-241-0/+1
| | | | | | | | | We can remove the rt_gateway == 0 check but we shouldn't remove the 'dst' initialization too. Noticed by Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Remove bogus checks of rt_gateway being zero.David S. Miller2012-01-241-2/+0
| | | | | | | | It can never actually happen. rt_gateway is either the fully resolved flow lookup key's destination address, or the non-zero FIB entry gateway address. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: reintroduce missing rcu_assign_pointer() callsEric Dumazet2012-01-121-4/+4
| | | | | | | | | | | | | | commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-12-161-1/+6
|\ | | | | | | | | | | | | Conflicts: drivers/net/ethernet/freescale/fsl_pq_mdio.c net/batman-adv/translation-table.c net/ipv6/route.c
| * ipip, sit: copy parms.name after register_netdeviceTed Feng2011-12-121-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng <artisdom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: better pcpu data alignmentEric Dumazet2011-11-081-1/+1
|/ | | | | | | | | | | Tunnels can force an alignment of their percpu data to reduce number of cache lines used in fast path, or read in .ndo_get_stats() percpu_alloc() is a very fine grained allocator, so any small hole will be used anyway. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTERStephen Hemminger2011-08-021-5/+5
| | | | | | | | | | | | | | | | | | | | When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: call dev_alloc_name from register_netdeviceJiri Pirko2011-05-051-5/+0
| | | | | | | | | | | | | | Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Use flowi4->{daddr,saddr} in ipip_tunnel_xmit().David S. Miller2011-05-041-2/+2
| | | | | | Instead of rt->rt_{dst,src} Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Make caller provide on-stack flow key to ip_route_output_ports().David S. Miller2011-05-031-8/+11
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: constify ip headers and in6_addrEric Dumazet2011-04-221-4/+4
| | | | | | | | Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 13:19:52 +0000