summaryrefslogtreecommitdiffstats
path: root/net/ipv6
Commit message (Collapse)AuthorAgeFilesLines
* ipv6: fix ipv6_cow_metrics for non DST_HOST caseMartin KaFai Lau2015-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipv6_cow_metrics() currently assumes only DST_HOST routes require dynamic metrics allocation from inetpeer. The assumption breaks when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric. Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set() is called after the route is created. This patch creates the metrics array (by calling dst_cow_metrics_generic) in ipv6_cow_metrics(). Test: radvd.conf: interface qemubr0 { AdvLinkMTU 1300; AdvCurHopLimit 30; prefix fd00:face:face:face::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; }; Before: [root@qemu1 ~]# ip -6 r show | egrep -v unreachable fd00:face:face:face::/64 dev eth0 proto kernel metric 256 expires 27sec fe80::/64 dev eth0 proto kernel metric 256 default via fe80::74df:d0ff:fe23:8ef2 dev eth0 proto ra metric 1024 expires 27sec After: [root@qemu1 ~]# ip -6 r show | egrep -v unreachable fd00:face:face:face::/64 dev eth0 proto kernel metric 256 expires 27sec mtu 1300 fe80::/64 dev eth0 proto kernel metric 256 mtu 1300 default via fe80::74df:d0ff:fe23:8ef2 dev eth0 proto ra metric 1024 expires 27sec mtu 1300 hoplimit 30 Fixes: 8e2ec639173f325 (ipv6: don't use inetpeer to store metrics for routes.) Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gcJan Stancek2015-02-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use spin_lock_bh in ip6_fl_purge() to prevent following potentially deadlock scenario between ip6_fl_purge() and ip6_fl_gc() timer. ================================= [ INFO: inconsistent lock state ] 3.19.0 #1 Not tainted --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/5/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ip6_fl_lock){+.?...}, at: [<ffffffff8171155d>] ip6_fl_gc+0x2d/0x180 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810ee9a0>] __lock_acquire+0x4a0/0x10b0 [<ffffffff810efd54>] lock_acquire+0xc4/0x2b0 [<ffffffff81751d2d>] _raw_spin_lock+0x3d/0x80 [<ffffffff81711798>] ip6_flowlabel_net_exit+0x28/0x110 [<ffffffff815f9759>] ops_exit_list.isra.1+0x39/0x60 [<ffffffff815fa320>] cleanup_net+0x100/0x1e0 [<ffffffff810ad80a>] process_one_work+0x20a/0x830 [<ffffffff810adf4b>] worker_thread+0x11b/0x460 [<ffffffff810b42f4>] kthread+0x104/0x120 [<ffffffff81752bfc>] ret_from_fork+0x7c/0xb0 irq event stamp: 84640 hardirqs last enabled at (84640): [<ffffffff81752080>] _raw_spin_unlock_irq+0x30/0x50 hardirqs last disabled at (84639): [<ffffffff81751eff>] _raw_spin_lock_irq+0x1f/0x80 softirqs last enabled at (84628): [<ffffffff81091ad1>] _local_bh_enable+0x21/0x50 softirqs last disabled at (84629): [<ffffffff81093b7d>] irq_exit+0x12d/0x150 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(ip6_fl_lock); <Interrupt> lock(ip6_fl_lock); *** DEADLOCK *** Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp: Set SKB_GSO_UDP_TUNNEL* in UDP GRO pathTom Herbert2015-02-111-1/+5
| | | | | | | | | | | Properly set GSO types and skb->encapsulation in the UDP tunnel GRO complete so that packets are properly represented for GSO. This sets SKB_GSO_UDP_TUNNEL or SKB_GSO_UDP_TUNNEL_CSUM depending on whether non-zero checksums were received, and sets SKB_GSO_TUNNEL_REMCSUM if the remote checksum option was processed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Partial checksum only UDP packetsVlad Yasevich2015-02-111-1/+1
| | | | | | | | | | | ip6_append_data is used by other protocols and some of them can't be partially checksummed. Only partially checksum UDP protocol. Fixes: 32dce968dd987a (ipv6: Allow for partial checksums on non-ufo packets) Reported-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-02-093-5/+40
|\ | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Make __ipv6_select_ident staticVlad Yasevich2015-02-091-1/+2
| | | | | | | | | | | | | | | | | | Make __ipv6_select_ident() static as it isn't used outside the file. Fixes: 0508c07f5e0c9 (ipv6: Select fragment id during UFO segmentation if not set.) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Fix fragment id assignment on LE arches.Vlad Yasevich2015-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent commit: 0508c07f5e0c94f38afd5434e8b2a55b84553077 Author: Vlad Yasevich <vyasevich@gmail.com> Date: Tue Feb 3 16:36:15 2015 -0500 ipv6: Select fragment id during UFO segmentation if not set. Introduced a bug on LE in how ipv6 fragment id is assigned. This was cought by nightly sparce check: Resolve the following sparce error: net/ipv6/output_core.c:57:38: sparse: incorrect type in assignment (different base types) net/ipv6/output_core.c:57:38: expected restricted __be32 [usertype] ip6_frag_id net/ipv6/output_core.c:57:38: got unsigned int [unsigned] [assigned] [usertype] id Fixes: 0508c07f5e0c9 (ipv6: Select fragment id during UFO segmentation if not set.) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: addrconf: add missing validate_link_af handlerDaniel Borkmann2015-02-061-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | We still need a validate_link_af() handler with an appropriate nla policy, similarly as we have in IPv4 case, otherwise size validations are not being done properly in that case. Fixes: f53adae4eae5 ("net: ipv6: add tokenized interface identifier support") Fixes: bc91b0f07ada ("ipv6: addrconf: implement address generation modes") Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ipv6: allow explicitly choosing optimistic addressesErik Kline2015-02-052-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RFC 4429 ("Optimistic DAD") states that optimistic addresses should be treated as deprecated addresses. From section 2.1: Unless noted otherwise, components of the IPv6 protocol stack should treat addresses in the Optimistic state equivalently to those in the Deprecated state, indicating that the address is available for use but should not be used if another suitable address is available. Optimistic addresses are indeed avoided when other addresses are available (i.e. at source address selection time), but they have not heretofore been available for things like explicit bind() and sendmsg() with struct in6_pktinfo, etc. This change makes optimistic addresses treated more like deprecated addresses than tentative ones. Signed-off-by: Erik Kline <ek@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | rt6_probe_deferred: Do not depend on struct orderingMichael Büsch2015-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | rt6_probe allocates a struct __rt6_probe_work and schedules a work handler rt6_probe_deferred. But rt6_probe_deferred kfree's the struct work_struct instead of struct __rt6_probe_work. This works, because struct work_struct is the first element of struct __rt6_probe_work. Change it to kfree struct __rt6_probe_work to not implicitly depend on struct work_struct being the first element. This does not affect the generated code. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-02-055-27/+50
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sit: fix some __be16/u16 mismatchesEric Dumazet2015-02-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes following sparse warnings : net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1509:32: expected restricted __be16 [usertype] sport net/ipv6/sit.c:1509:32: got unsigned short net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1514:32: expected restricted __be16 [usertype] dport net/ipv6/sit.c:1514:32: got unsigned short net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1711:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1711:38: got restricted __be16 [usertype] sport net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1713:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1713:38: got restricted __be16 [usertype] dport Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ip6_gre: fix endianness errors in ip6gre_errSabrina Dubroca2015-02-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | info is in network byte order, change it back to host byte order before use. In particular, the current code sets the MTU of the tunnel to a wrong (too big) value. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Select fragment id during UFO segmentation if not set.Vlad Yasevich2015-02-033-21/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the IPv6 fragment id has not been set and we perform fragmentation due to UFO, select a new fragment id. We now consider a fragment id of 0 as unset and if id selection process returns 0 (after all the pertrubations), we set it to 0x80000000, thus giving us ample space not to create collisions with the next packet we may have to fragment. When doing UFO integrity checking, we also select the fragment id if it has not be set yet. This is stored into the skb_shinfo() thus allowing UFO to function correclty. This patch also removes duplicate fragment id generation code and moves ipv6_select_ident() into the header as it may be used during GSO. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-davem' of ↵David S. Miller2015-02-042-6/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs More iov_iter work from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: switch memcpy_fromiovec()/memcpy_fromiovecend() users to copy_from_iter()Al Viro2015-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | That takes care of the majority of ->sendmsg() instances - most of them via memcpy_to_msg() or assorted getfrag() callbacks. One place where we still keep memcpy_fromiovecend() is tipc - there we potentially read the same data over and over; separate patch, that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | ip: stash a pointer to msghdr in struct ping_fakehdrAl Viro2015-02-041-2/+1
| | | | | | | | | | | | | | | | | | ... instead of storing its ->mgs_iter.iov there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | ipv6: rawv6_send_hdrinc(): pass msghdrAl Viro2015-02-041-4/+3
| | | | | | | | | | | | | | | | | | Switch from passing msg->iov_iter.iov to passing msg itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | ipv6: Allow for partial checksums on non-ufo packetsVlad Yasevich2015-02-021-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currntly, if we are not doing UFO on the packet, all UDP packets will start with CHECKSUM_NONE and thus perform full checksum computations in software even if device support IPv6 checksum offloading. Let's start start with CHECKSUM_PARTIAL if the device supports it and we are sending only a single packet at or below mtu size. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | udpv6: Add lockless sendmsg() supportVlad Yasevich2015-02-021-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds the same functionaliy to IPv6 that commit 903ab86d195cca295379699299c5fc10beba31c7 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Tue Mar 1 02:36:48 2011 +0000 udp: Add lockless transmit path added to IPv4. UDP transmit path can now run without a socket lock, thus allowing multiple threads to send to a single socket more efficiently. This is only used when corking/MSG_MORE is not used. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ipv6: Introduce udpv6_send_skb()Vlad Yasevich2015-02-021-27/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we can individually construct IPv6 skbs to send, add a udpv6_send_skb() function to populate the udp header and send the skb. This allows udp_v6_push_pending_frames() to re-use this function as well as enables us to add lockless sendmsg() support. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ipv6: introduce ipv6_make_skbVlad Yasevich2015-02-021-19/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit is very similar to commit 1c32c5ad6fac8cee1a77449f5abf211e911ff830 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Tue Mar 1 02:36:47 2011 +0000 inet: Add ip_make_skb and ip_finish_skb It adds IPv6 version of the helpers ip6_make_skb and ip6_finish_skb. The job of ip6_make_skb is to collect messages into an ipv6 packet and poplulate ipv6 eader. The job of ip6_finish_skb is to transmit the generated skb. Together they replicated the job of ip6_push_pending_frames() while also provide the capability to be called independently. This will be needed to add lockless UDP sendmsg support. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ipv6: Append sending data to arbitrary queueVlad Yasevich2015-02-021-39/+67
| | | | | | | | | | | | | | | | | | | | | | | | Add the ability to append data to arbitrary queue. This will be needed later to implement lockless UDP sends. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ipv6: pull cork initialization into its own function.Vlad Yasevich2015-02-021-69/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull IPv6 cork initialization into its own function that can be re-used. IPv6 specific cork data did not have an explicit data structure. This patch creats eone so that just ipv6 cork data can be as arguemts. Also, since IPv6 tries to save the flow label into inet_cork_full tructure, pass the full cork. Adjust ip6_cork_release() to take cork data structures. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net-timestamp: no-payload optionWillem de Bruijn2015-02-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add timestamping option SOF_TIMESTAMPING_OPT_TSONLY. For transmit timestamps, this loops timestamps on top of empty packets. Doing so reduces the pressure on SO_RCVBUF. Payload inspection and cmsg reception (aside from timestamps) are no longer possible. This works together with a follow on patch that allows administrators to only allow tx timestamping if it does not loop payload or metadata. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes (rfc -> v1) - add documentation - remove unnecessary skb->len test (thanks to Richard Cochran) Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: mark some potential candidates __read_mostlyDaniel Borkmann2015-01-301-1/+1
|/ / | | | | | | | | | | | | | | They are all either written once or extremly rarely (e.g. from init code), so we can move them to the .data..read_mostly section. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-01-274-34/+44
|\| | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵David S. Miller2015-01-271-2/+8
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2015-01-26 Just two small fixes for _decode_session6() where we might decode to wrong header information in some rare situations. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * xfrm6: Fix the nexthdr offset in _decode_session6.Steffen Klassert2014-12-081-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xfrm_decode_session() was originally designed for the usage in the receive path where the correct nexthdr offset is stored in IP6CB(skb)->nhoff. Over time this function spread to code that is used in the output path (netfilter, vti) where IP6CB(skb)->nhoff is not set. As a result, we get a wrong nexthdr and the upper layer flow informations are wrong. This can leed to incorrect policy lookups. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
| | * xfrm6: Fix transport header offset in _decode_session6.Steffen Klassert2014-12-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | skb->transport_header might not be valid when we do a reverse decode because the ipv6 tunnel error handlers don't update it to the inner transport header. This leads to a wrong offset calculation and to wrong layer 4 informations. We fix this by using the size of the ipv6 header as the first offset. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
| * | ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos tooHannes Frederic Sowa2015-01-271-19/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: Fix __ip6_route_redirectMartin KaFai Lau2015-01-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In my last commit (a3c00e4: ipv6: Remove BACKTRACK macro), the changes in __ip6_route_redirect is incorrect. The following case is missed: 1. The for loop tries to find a valid gateway rt. If it fails to find one, rt will be NULL. 2. When rt is NULL, it is set to the ip6_null_entry. 3. The newly added 'else if', from a3c00e4, will stop the backtrack from happening. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: stop sending PTB packets for MTU < 1280Hagen Paul Pfeifer2015-01-191-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the attack vector and stop generating IPv6 Fragment Header for paths with an MTU smaller than the minimum required IPv6 MTU size (1280 byte) - called atomic fragments. See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1] for more information and how this "feature" can be misused. [1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00 Signed-off-by: Fernando Gont <fgont@si6networks.com> Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ip: zero sockaddr returned on error queueWillem de Bruijn2015-01-151-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That structure is defined and allocated on the stack as struct { struct sock_extended_err ee; struct sockaddr_in(6) offender; } errhdr; The second part is only initialized for certain SO_EE_ORIGIN values. Always initialize it completely. An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that would return uninitialized bytes. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Also verified that there is no padding between errhdr.ee and errhdr.offender that could leak additional kernel data. Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ipv6: tcp: fix race in IPV6_2292PKTOPTIONSEric Dumazet2015-01-261-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IPv6 TCP sockets store in np->pktoptions skbs, and use skb_set_owner_r() to charge the skb to socket. It means that destructor must be called while socket is locked. Therefore, we cannot use skb_get() or atomic_inc(&skb->users) to protect ourselves : kfree_skb() might race with other users manipulating sk->sk_forward_alloc Fix this race by holding socket lock for the duration of ip6_datagram_recv_ctl() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: ipv6: Add sysctl entry to disable MTU updates from RAHarout Hedeshian2015-01-252-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel forcefully applies MTU values received in router advertisements provided the new MTU is less than the current. This behavior is undesirable when the user space is managing the MTU. Instead a sysctl flag 'accept_ra_mtu' is introduced such that the user space can control whether or not RA provided MTU updates should be applied. The default behavior is unchanged; user space must explicitly set this flag to 0 for RA MTUs to be ignored. Signed-off-by: Harout Hedeshian <harouth@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | udp: Do not require sock in udp_tunnel_xmit_skbTom Herbert2015-01-241-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UDP tunnel transmit functions udp_tunnel_xmit_skb and udp_tunnel6_xmit_skb include a socket argument. The socket being passed to the functions (from VXLAN) is a UDP created for receive side. The only thing that the socket is used for in the transmit functions is to get the setting for checksum (enabled or zero). This patch removes the argument and and adds a nocheck argument for checksum setting. This eliminates the unnecessary dependency on a UDP socket for UDP tunnel transmit. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ip6gretap: advertise link netns via netlinkNicolas Dichtel2015-01-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tunnels: advertise link netns via netlinkNicolas Dichtel2015-01-194-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | netlink: Fix bugs in nlmsg_end() conversions.David S. Miller2015-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 053c095a82cf ("netlink: make nlmsg_end() and genlmsg_end() void") didn't catch all of the cases where callers were breaking out on the return value being equal to zero, which they no longer should when zero means success. Fix all such cases. Reported-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg2015-01-185-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-01-151-4/+4
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2015-01-121-4/+4
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== netfilter/ipvs fixes for net The following patchset contains netfilter/ipvs fixes, they are: 1) Small fix for the FTP helper in IPVS, a diff variable may be left unset when CONFIG_IP_VS_IPV6 is set. Patch from Dan Carpenter. 2) Fix nf_tables port NAT in little endian archs, patch from leroy christophe. 3) Fix race condition between conntrack confirmation and flush from userspace. This is the second reincarnation to resolve this problem. 4) Make sure inner messages in the batch come with the nfnetlink header. 5) Relax strict check from nfnetlink_bind() that may break old userspace applications using all 1s group mask. 6) Schedule removal of chains once no sets and rules refer to them in the new nf_tables ruleset flush command. Reported by Asbjoern Sloth Toennesen. Note that this batch comes later than usual because of the short winter holidays. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | netfilter: nf_tables: fix port natting in little endian archsleroy christophe2014-12-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure this fetches 16-bits port data from the register. Remove casting to make sparse happy, not needed anymore. Signed-off-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | | | ipv6:icmp:remove unnecessary bracketszhuyj2015-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are too many brackets. Maybe only one bracket is enough. Signed-off-by: Zhu Yanjun <Yanjun.Zhu@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: tcp: add per route congestion controlDaniel Borkmann2015-01-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This work adds the possibility to define a per route/destination congestion control algorithm. Generally, this opens up the possibility for a machine with different links to enforce specific congestion control algorithms with optimal strategies for each of them based on their network characteristics, even transparently for a single application listening on all links. For our specific use case, this additionally facilitates deployment of DCTCP, for example, applications can easily serve internal traffic/dsts in DCTCP and external one with CUBIC. Other scenarios would also allow for utilizing e.g. long living, low priority background flows for certain destinations/routes while still being able for normal traffic to utilize the default congestion control algorithm. We also thought about a per netns setting (where different defaults are possible), but given its actually a link specific property, we argue that a per route/destination setting is the most natural and flexible. The administrator can utilize this through ip-route(8) by appending "congctl [lock] <name>", where <name> denotes the name of a congestion control algorithm and the optional lock parameter allows to enforce the given algorithm so that applications in user space would not be allowed to overwrite that algorithm for that destination. The dst metric lookups are being done when a dst entry is already available in order to avoid a costly lookup and still before the algorithms are being initialized, thus overhead is very low when the feature is not being used. While the client side would need to drop the current reference on the module, on server side this can actually even be avoided as we just got a flat-copied socket clone. Joint work with Florian Westphal. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: tcp: add RTAX_CC_ALGO fib handlingDaniel Borkmann2015-01-051-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the minimum necessary for the RTAX_CC_ALGO congestion control metric to be set up and dumped back to user space. While the internal representation of RTAX_CC_ALGO is handled as a u32 key, we avoided to expose this implementation detail to user space, thus instead, we chose the netlink attribute that is being exchanged between user space to be the actual congestion control algorithm name, similarly as in the setsockopt(2) API in order to allow for maximum flexibility, even for 3rd party modules. It is a bit unfortunate that RTAX_QUICKACK used up a whole RTAX slot as it should have been stored in RTAX_FEATURES instead, we first thought about reusing it for the congestion control key, but it brings more complications and/or confusion than worth it. Joint work with Florian Westphal. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: fib6: convert cfg metric to u32 outside of table write lockFlorian Westphal2015-01-052-43/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do the nla validation earlier, outside the write lock. This is needed by followup patch which needs to be able to call request_module (which can sleep) if needed. Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: fib6: fib6_commit_metrics: fix potential NULL pointer dereferenceDaniel Borkmann2015-01-051-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When IPv6 host routes with metrics attached are being added, we fetch the metrics store from the dst via COW through dst_metrics_write_ptr(), added through commit e5fd387ad5b3. One remaining problem here is that we actually call into inet_getpeer() and may end up allocating/creating a new peer from the kmemcache, which may fail. Example trace from perf probe (inet_getpeer:41) where create is 1: ip 6877 [002] 4221.391591: probe:inet_getpeer: (ffffffff8165e293) 85e294 inet_getpeer.part.7 (<- kmem_cache_alloc()) 85e578 inet_getpeer 8eb333 ipv6_cow_metrics 8f10ff fib6_commit_metrics Therefore, a check for NULL on the return of dst_metrics_write_ptr() is necessary here. Joint work with Florian Westphal. Fixes: e5fd387ad5b3 ("ipv6: do not overwrite inetpeer metrics prematurely") Cc: Michal Kubeček <mkubecek@suse.cz> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | ip: Move checksum convert defines to inetTom Herbert2015-01-051-1/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | Move convert_csum from udp_sock to inet_sock. This allows the possibility that we can use convert checksum for different types of sockets and also allows convert checksum to be enabled from inet layer (what we'll want to do when enabling IP_CHECKSUM cmsg). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 15:34:02 +0000