summaryrefslogtreecommitdiffstats
path: root/net/netlabel
Commit message (Collapse)AuthorAgeFilesLines
* netlabel: check for IPV4MASK in addrinfo_getSean Tranchetti2018-09-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this. If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute: Unable to handle kernel NULL pointer dereference at virtual address 0 Process unlab (pid: 31762, stack limit = 0xffffff80502d8000) Call trace: netlbl_unlabel_addrinfo_get+0x44/0xd8 netlbl_unlabel_staticremovedef+0x98/0xe0 genl_rcv_msg+0x354/0x388 netlink_rcv_skb+0xac/0x118 genl_rcv+0x34/0x48 netlink_unicast+0x158/0x1f0 netlink_sendmsg+0x32c/0x338 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Code: 51001149 7100113f 540000a0 f9401508 (79400108) ---[ end trace f6438a488e737143 ]--- Kernel panic - not syncing: Fatal exception Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* audit: eliminate audit_enabled magic number comparisonRichard Guy Briggs2018-06-191-1/+1
| | | | | | | | | Remove comparison of audit_enabled to magic numbers outside of audit. Related: https://github.com/linux-audit/audit-kernel/issues/86 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* audit: use inline function to get audit contextRichard Guy Briggs2018-05-141-1/+1
| | | | | | | | | | Recognizing that the audit context is an internal audit value, use an access function to retrieve the audit context pointer for the task rather than reaching directly into the task struct to get it. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes] Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: If PF_INET6, check sk_buff ip header versionRichard Haines2018-02-141-0/+10
| | | | | | | | | | When resolving a fallback label, check the sk_buff version as it is possible (e.g. SCTP) to have family = PF_INET6 while receiving ip_hdr(skb)->version = 4. Signed-off-by: Richard Haines <richard_c_haines@btinternet.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* net/netlabel: Add list_next_rcu() in rcu_dereference().Tim Hansen2017-11-181-2/+2
| | | | | | | | | Add list_next_rcu() for fetching next list in rcu_deference safely. Found with sparse in linux-next tree on tag next-20171116. Signed-off-by: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar2017-11-071-0/+1
|\ | | | | | | | | | | | | | | | | | | Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland2017-10-251-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* netlink: pass extended ACK struct to parsing functionsJohannes Berg2017-04-131-9/+10
| | | | | | | | | Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: add CALIPSO to the list of built-in protocolsPaul Moore2017-01-061-4/+1
| | | | | | | | When we added CALIPSO support in Linux v4.8 we forgot to add it to the list of supported protocols with display at boot. Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: mark families as __ro_after_initJohannes Berg2016-10-274-4/+4
| | | | | | | | | | | | | | | | Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: statically initialize familiesJohannes Berg2016-10-274-33/+48
| | | | | | | | | | | | Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: no longer support using static family IDsJohannes Berg2016-10-274-4/+0
| | | | | | | | | | | | | | | | | | | | | | | Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: Implement CALIPSO config functions for SMACK.Huw Davies2016-06-273-0/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | | SMACK uses similar functions to control CIPSO, these are the equivalent functions for CALIPSO and follow exactly the same semantics. int netlbl_cfg_calipso_add(struct calipso_doi *doi_def, struct netlbl_audit *audit_info) Adds a CALIPSO doi. void netlbl_cfg_calipso_del(u32 doi, struct netlbl_audit *audit_info) Removes a CALIPSO doi. int netlbl_cfg_calipso_map_add(u32 doi, const char *domain, const struct in6_addr *addr, const struct in6_addr *mask, struct netlbl_audit *audit_info) Creates a mapping between a domain and a CALIPSO doi. If addr and mask are non-NULL this creates an address-selector type mapping. This also extends netlbl_cfg_map_del() to remove IPv6 address-selector mappings. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* calipso: Add a label cache.Huw Davies2016-06-273-5/+60
| | | | | | | | | | | | | | This works in exactly the same way as the CIPSO label cache. The idea is to allow the lsm to cache the result of a secattr lookup so that it doesn't need to perform the lookup for every skbuff. It introduces two sysctl controls: calipso_cache_enable - enables/disables the cache. calipso_cache_bucket_size - sets the size of a cache bucket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Pass a family parameter to netlbl_skbuff_err().Huw Davies2016-06-271-3/+8
| | | | | | | | | | This makes it possible to route the error to the appropriate labelling engine. CALIPSO is far less verbose than CIPSO when encountering a bogus packet, so there is no need for a CALIPSO error handler. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* calipso: Allow the lsm to label the skbuff directly.Huw Davies2016-06-273-4/+117
| | | | | | | | | In some cases, the lsm needs to add the label to the skbuff directly. A NF_INET_LOCAL_OUT IPv6 hook is added to selinux to match the IPv4 behaviour. This allows selinux to label the skbuffs that it requires. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* calipso: Allow request sockets to be relabelled by the lsm.Huw Davies2016-06-273-7/+70
| | | | | | | | | Request sockets need to have a label that takes into account the incoming connection as well as their parent's label. This is used for the outgoing SYN-ACK and for their child full-socket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* calipso: Set the calipso socket label to match the secattr.Huw Davies2016-06-274-8/+120
| | | | | | | | | CALIPSO is a hop-by-hop IPv6 option. A lot of this patch is based on the equivalent CISPO code. The main difference is due to manipulating the options in the hop-by-hop header. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Move bitmap manipulation functions to the NetLabel core.Huw Davies2016-06-271-0/+70
| | | | | | | This is to allow the CALIPSO labelling engine to use these. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Add support for removing a CALIPSO DOI.Huw Davies2016-06-272-0/+101
| | | | | | | | | Remove a specified DOI through the NLBL_CALIPSO_C_REMOVE command. It requires the attribute: NLBL_CALIPSO_A_DOI. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Add support for creating a CALIPSO protocol domain mapping.Huw Davies2016-06-274-5/+89
| | | | | | | | This extends the NLBL_MGMT_C_ADD and NLBL_MGMT_C_ADDDEF commands to accept CALIPSO protocol DOIs. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Add support for enumerating the CALIPSO DOI list.Huw Davies2016-06-272-0/+120
| | | | | | | | Enumerate the DOI list through the NLBL_CALIPSO_C_LISTALL command. It takes no attributes. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Add support for querying a CALIPSO DOI.Huw Davies2016-06-272-0/+121
| | | | | | | | | | | | Query a specified DOI through the NLBL_CALIPSO_C_LIST command. It requires the attribute: NLBL_CALIPSO_A_DOI. The reply will contain: NLBL_CALIPSO_A_MTYPE Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Initial support for the CALIPSO netlink protocol.Huw Davies2016-06-276-1/+322
| | | | | | | | | | | | | | | | | | | | | | CALIPSO is a packet labelling protocol for IPv6 which is very similar to CIPSO. It is specified in RFC 5570. Much of the code is based on the current CIPSO code. This adds support for adding passthrough-type CALIPSO DOIs through the NLBL_CALIPSO_C_ADD command. It requires attributes: NLBL_CALIPSO_A_TYPE which must be CALIPSO_MAP_PASS. NLBL_CALIPSO_A_DOI. In passthrough mode the CALIPSO engine will map MLS secattr levels and categories directly to the packet label. At this stage, the major difference between this and the CIPSO code is that IPv6 may be compiled as a module. To allow for this the CALIPSO functions are registered at module init time. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Add an address family to domain hash entries.Huw Davies2016-06-276-58/+192
| | | | | | | | | | | | | | | | | | | | | The reason is to allow different labelling protocols for different address families with the same domain. This requires the addition of an address family attribute in the netlink communication protocol. It is used in several messages: NLBL_MGMT_C_ADD and NLBL_MGMT_C_ADDDEF take it as an optional attribute for the unlabelled protocol. It may be one of AF_INET, AF_INET6 or AF_UNSPEC (to specify both address families). If it is missing, it defaults to AF_UNSPEC. NLBL_MGMT_C_LISTALL and NLBL_MGMT_C_LISTDEF return it as part of the enumeration of each item. Addtionally, it may be sent to LISTDEF to specify which address family to return. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: Mark rcu pointers with __rcu.Huw Davies2016-06-272-4/+4
| | | | | | | | This fixes sparse errors of the form: incompatible types in comparison expression (different address spaces) Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: handle sparse category maps in netlbl_catmap_getlong()Paul Moore2016-06-091-5/+4
| | | | | | | | | | | | In cases where the category bitmap is sparse enough that gaps exist between netlbl_lsm_catmap structs, callers to netlbl_catmap_getlong() could find themselves prematurely ending their search through the category bitmap. Further, the methods used to calculate the 'idx' and 'off' values were incorrect for bitmaps this large. This patch changes the netlbl_catmap_getlong() behavior so that it always skips over gaps and calculates the index and offset values correctly. Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: add address family checks to netlbl_{sock,req}_delattr()Paul Moore2016-06-061-2/+10
| | | | | | | | | | | | It seems risky to always rely on the caller to ensure the socket's address family is correct before passing it to the NetLabel kAPI, especially since we see at least one LSM which didn't. Add address family checks to the *_delattr() functions to help prevent future problems. Cc: <stable@vger.kernel.org> Reported-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: fix a problem with netlbl_secattr_catmap_setrng()Janak Desai2016-04-051-1/+1
| | | | | | | | | | We try to be clever and set large chunks of the bitmap at once, when possible; unfortunately we weren't very clever when we wrote the code and messed up the if-conditional. Fix this bug and restore proper operation. Signed-off-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: do not initialise statics to NULLWei Tang2016-03-071-2/+2
| | | | | | | | | This patch fixes the checkpatch.pl error to netlabel_domainhash.c: ERROR: do not initialise statics to NULL Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: do not initialise statics to 0 or NULLWei Tang2016-03-071-3/+3
| | | | | | | | | This patch fixes the checkpatch.pl error to netlabel_unlabeled.c: ERROR: do not initialise statics to 0 or NULL Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc2015-03-312-28/+20
| | | | | | | | | | | | IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'next' of ↵Linus Torvalds2015-02-111-5/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: "Highlights: - Smack adds secmark support for Netfilter - /proc/keys is now mandatory if CONFIG_KEYS=y - TPM gets its own device class - Added TPM 2.0 support - Smack file hook rework (all Smack users should review this!)" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (64 commits) cipso: don't use IPCB() to locate the CIPSO IP option SELinux: fix error code in policydb_init() selinux: add security in-core xattr support for pstore and debugfs selinux: quiet the filesystem labeling behavior message selinux: Remove unused function avc_sidcmp() ima: /proc/keys is now mandatory Smack: Repair netfilter dependency X.509: silence asn1 compiler debug output X.509: shut up about included cert for silent build KEYS: Make /proc/keys unconditional if CONFIG_KEYS=y MAINTAINERS: email update tpm/tpm_tis: Add missing ifdef CONFIG_ACPI for pnp_acpi_device smack: fix possible use after frees in task_security() callers smack: Add missing logging in bidirectional UDS connect check Smack: secmark support for netfilter Smack: Rework file hooks tpm: fix format string error in tpm-chip.c char/tpm/tpm_crb: fix build error smack: Fix a bidirectional UDS connect check typo smack: introduce a special case for tmpfs in smack_d_instantiate() ...
| * cipso: don't use IPCB() to locate the CIPSO IP optionPaul Moore2015-02-111-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using the IPCB() macro to get the IPv4 options is convenient, but unfortunately NetLabel often needs to examine the CIPSO option outside of the scope of the IP layer in the stack. While historically IPCB() worked above the IP layer, due to the inclusion of the inet_skb_param struct at the head of the {tcp,udp}_skb_cb structs, recent commit 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") reordered the tcp_skb_cb struct and invalidated this IPCB() trick. This patch fixes the problem by creating a new function, cipso_v4_optptr(), which locates the CIPSO option inside the IP header without calling IPCB(). Unfortunately, this isn't as fast as a simple lookup so some additional tweaks were made to limit the use of this new function. Cc: <stable@vger.kernel.org> # 3.18 Reported-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
* | netlabel: Less function calls in netlbl_mgmt_add_common() after error detectionMarkus Elfring2015-02-031-25/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions "cipso_v4_doi_putdef" and "kfree" could be called in some cases by the netlbl_mgmt_add_common() function during error handling even if the passed variables contained still a null pointer. * This implementation detail could be improved by adjustments for jump labels. * Let us return immediately after the first failed function call according to the current Linux coding style convention. * Let us delete also an unnecessary check for the variable "entry" there. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlabel: Deletion of an unnecessary check before the function call ↵Markus Elfring2015-02-031-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | "cipso_v4_doi_free" The cipso_v4_doi_free() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlabel: Deletion of an unnecessary check before the function call ↵Markus Elfring2015-02-031-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | "cipso_v4_doi_putdef" The cipso_v4_doi_putdef() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg2015-01-183-4/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: kernel-doc warning fixFabian Frederick2014-10-091-1/+0
| | | | | | | | no secid argument in netlbl_cfg_unlbl_static_del Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: directly return netlbl_unlabel_genl_init()Fabian Frederick2014-10-081-5/+1
| | | | | | | No need to store netlbl_unlabel_genl_init result and test it before returning. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-08-061-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
| * netlabel: remove unnecessary break after gotoFabian Frederick2014-07-151-1/+0
| | | | | | | | | | | | Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlabel: shorter names for the NetLabel catmap funcs/structsPaul Moore2014-08-011-57/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | Historically the NetLabel LSM secattr catmap functions and data structures have had very long names which makes a mess of the NetLabel code and anyone who uses NetLabel. This patch renames the catmap functions and structures from "*_secattr_catmap_*" to just "*_catmap_*" which improves things greatly. There are no substantial code or logic changes in this patch. Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
* | netlabel: fix the catmap walking functionsPaul Moore2014-08-011-48/+54
| | | | | | | | | | | | | | | | | | | | | | | | The two NetLabel LSM secattr catmap walk functions didn't handle certain edge conditions correctly, causing incorrect security labels to be generated in some cases. This patch corrects these problems and converts the functions to use the new _netlbl_secattr_catmap_getnode() function in order to reduce the amount of repeated code. Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
* | netlabel: fix the horribly broken catmap functionsPaul Moore2014-08-011-50/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NetLabel secattr catmap functions, and the SELinux import/export glue routines, were broken in many horrible ways and the SELinux glue code fiddled with the NetLabel catmap structures in ways that we probably shouldn't allow. At some point this "worked", but that was likely due to a bit of dumb luck and sub-par testing (both inflicted by yours truly). This patch corrects these problems by basically gutting the code in favor of something less obtuse and restoring the NetLabel abstractions in the SELinux catmap glue code. Everything is working now, and if it decides to break itself in the future this code will be much easier to debug than the code it replaces. One noteworthy side effect of the changes is that it is no longer necessary to allocate a NetLabel catmap before calling one of the NetLabel APIs to set a bit in the catmap. NetLabel will automatically allocate the catmap nodes when needed, resulting in less allocations when the lowest bit is greater than 255 and less code in the LSMs. Cc: stable@vger.kernel.org Reported-by: Christian Evans <frodox@zoho.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
* | netlabel: fix a problem when setting bits below the previously lowest bitPaul Moore2014-08-011-8/+18
|/ | | | | | | | | | | | | | | | | The NetLabel category (catmap) functions have a problem in that they assume categories will be set in an increasing manner, e.g. the next category set will always be larger than the last. Unfortunately, this is not a valid assumption and could result in problems when attempting to set categories less than the startbit in the lowest catmap node. In some cases kernel panics and other nasties can result. This patch corrects the problem by checking for this and allocating a new catmap node instance and placing it at the front of the list. Cc: stable@vger.kernel.org Reported-by: Christian Evans <frodox@zoho.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
* netlabel: Fix FSF address in file headersJeff Kirsher2013-12-0613-26/+13
| | | | | | | | | | | Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Paul Moore <paul@paul-moore.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: only pass array to genl_register_family_with_ops()Johannes Berg2013-11-193-3/+3
| | | | | | | | | | | | | | As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: make all genl_ops users constJohannes Berg2013-11-143-3/+3
| | | | | | | | | | | | | | | | | | | Now that genl_ops are no longer modified in place when registering, they can be made const. This patch was done mostly with spatch: @@ identifier ops; @@ +const struct genl_ops ops[] = { ... }; (except the struct thing in net/openvswitch/datapath.c) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 08:40:25 +0000