summaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
* netlink: Trim skb to alloc size to avoid MSG_TRUNCArad, Ronen2015-10-181-12/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netlink_dump() allocates skb based on the calculated min_dump_alloc or a per socket max_recvmsg_len. min_alloc_size is maximum space required for any single netdev attributes as calculated by rtnl_calcit(). max_recvmsg_len tracks the user provided buffer to netlink_recvmsg. It is capped at 16KiB. The intention is to avoid small allocations and to minimize the number of calls required to obtain dump information for all net devices. netlink_dump packs as many small messages as could fit within an skb that was sized for the largest single netdev information. The actual space available within an skb is larger than what is requested. It could be much larger and up to near 2x with align to next power of 2 approach. Allowing netlink_dump to use all the space available within the allocated skb increases the buffer size a user has to provide to avoid truncaion (i.e. MSG_TRUNG flag set). It was observed that with many VLANs configured on at least one netdev, a larger buffer of near 64KiB was necessary to avoid "Message truncated" error in "ip link" or "bridge [-c[ompressvlans]] vlan show" when min_alloc_size was only little over 32KiB. This patch trims skb to allocated size in order to allow the user to avoid truncation with more reasonable buffer size. Signed-off-by: Ronen Arad <ronen.arad@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Initialize rt6_info properly in ip6_blackhole_route()Martin KaFai Lau2015-10-161-15/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ip6_blackhole_route() does not initialize the newly allocated rt6_info properly. This patch: 1. Call rt6_info_init() to initialize rt6i_siblings and rt6i_uncached 2. The current rt->dst._metrics init code is incorrect: - 'rt->dst._metrics = ort->dst._metris' is not always safe - Not sure what dst_copy_metrics() is trying to do here considering ip6_rt_blackhole_cow_metrics() always returns NULL Fix: - Always do dst_copy_metrics() - Replace ip6_rt_blackhole_cow_metrics() with dst_cow_metrics_generic() 3. Mask out the RTF_PCPU bit from the newly allocated blackhole route. This bug triggers an oops (reported by Phil Sutter) in rt6_get_cookie(). It is because RTF_PCPU is set while rt->dst.from is NULL. Fixes: d52d3997f843 ("ipv6: Create percpu rt6_info") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Phil Sutter <phil@nwl.cc> Tested-by: Phil Sutter <phil@nwl.cc> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Julian Anastasov <ja@ssi.bg> Cc: Phil Sutter <phil@nwl.cc> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Move common init code for rt6_info to a new function rt6_info_init()Martin KaFai Lau2015-10-161-6/+11
| | | | | | | | | | | | | | | Introduce rt6_info_init() to do the common init work for 'struct rt6_info' (after calling dst_alloc). It is a prep work to fix the rt6_info init logic in the ip6_blackhole_route(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Julian Anastasov <ja@ssi.bg> Cc: Phil Sutter <phil@nwl.cc> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: move fragment importance field to new header positionJon Paul Maloy2015-10-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | In commit e3eea1eb47a ("tipc: clean up handling of message priorities") we introduced a field in the packet header for keeping track of the priority of fragments, since this value is not present in the specified protocol header. Since the value so far only is used at the transmitting end of the link, we have not yet officially defined it as part of the protocol. Unfortunately, the field we use for keeping this value, bits 13-15 in in word 5, has turned out to be a poor choice; it is already used by the broadcast protocol for carrying the 'network id' field of the sending node. Since packet fragments also need to be transported across the broadcast protocol, the risk of conflict is obvious, and we see this happen when we use network identities larger than 2^13-1. This has escaped our testing because we have so far only been using small network id values. We now move this field to bits 0-2 in word 9, a field that is guaranteed to be unused by all involved protocols. Fixes: e3eea1eb47a ("tipc: clean up handling of message priorities") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Use kcalloc instead of kmalloc for ethtool_get_stringsJoe Perches2015-10-141-1/+1
| | | | | | | | | | | It seems that kernel memory can leak into userspace by a kmalloc, ethtool_get_strings, then copy_to_user sequence. Avoid this by using kcalloc to zero fill the copied buffer. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mac80211-for-davem-2015-10-13' of ↵David S. Miller2015-10-143-3/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Like last time, we have two small fixes: * fast-xmit was not doing powersave filter clearing correctly, disable fast-xmit while any such operations are still pending * a debugfs file was broken due to some infrastructure changes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: Fix hwflags debugfs file formatMohammed Shafi Shajakhan2015-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Commit 30686bf7f5b3 ("mac80211: convert HW flags to unsigned long bitmap") accidentally removed the newline delimiter from the hwflags debugfs file. Fix this by adding back the newline between the HW flags. Cc: stable@vger.kernel.org [4.2] Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> [fix commit log] Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: fix handling of PS filtering with fast-xmitFelix Fietkau2015-09-242-2/+6
| | | | | | | | | | | | | | | | Fixes dropped packets in the tx path in case a non-PS station triggers the tx filter. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | tipc: eliminate risk of stalled link synchronizationJon Paul Maloy2015-10-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 6e498158a827 ("tipc: move link synch and failover to link aggregation level") we introduced a new mechanism for performing link failover and synchronization. We have now detected a bug in this mechanism. During link synchronization we use the arrival of any packet on the tunnel link to trig a check for whether it has reached the synchronization point or not. This has turned out to be too permissive, since it may cause an arriving non-last SYNCH packet to end the synch state, just to see the next SYNCH packet initiate a new synch state with a new, higher synch point. This is not fatal, but should be avoided, because it may significantly extend the synchronization period, while at the same time we are not allowed to send NACKs if packets are lost. In the worst case, a low-traffic user may see its traffic stall until a LINK_PROTOCOL state message trigs the link to leave synchronization state. At the same time, LINK_PROTOCOL packets which happen to have a (non- valid) sequence number lower than the tunnel link's rcv_nxt value will be consistently dropped, and will never be able to resolve the situation described above. We fix this by exempting LINK_PROTOCOL packets from the sequence number check, as they should be. We also reduce (but don't completely eliminate) the risk of entering multiple synchronization states by only allowing the (logically) first SYNCH packet to initiate a synchronization state. This works independently of actual packet arrival order. Fixes: commit 6e498158a827 ("tipc: move link synch and failover to link aggregation level") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: Don't call with rt6_uncached_list_flush_devEric W. Biederman2015-10-131-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As originally written rt6_uncached_list_flush_dev makes no sense when called with dev == NULL as it attempts to flush all uncached routes regardless of network namespace when dev == NULL. Which is simply incorrect behavior. Furthermore at the point rt6_ifdown is called with dev == NULL no more network devices exist in the network namespace so even if the code in rt6_uncached_list_flush_dev were to attempt something sensible it would be meaningless. Therefore remove support in rt6_uncached_list_flush_dev for handling network devices where dev == NULL, and only call rt6_uncached_list_flush_dev when rt6_ifdown is called with a network device. Fixes: 8d0b94afdca8 ("ipv6: Keep track of DST_NOCACHE routes in case of iface down/unregister") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | switchdev: check if the vlan id is in the proper vlan rangeNikolay Aleksandrov2015-10-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | VLANs 0 and 4095 are reserved and shouldn't be used, add checks to switchdev similar to the bridge. Also make sure ids above 4095 cannot be passed either. Fixes: 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: drop frames with attached skb->sk in forwardingHannes Frederic Sowa2015-10-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | This is a clone of commit 2ab957492d13b ("ip_forward: Drop frames with attached skb->sk") for ipv6. This commit has exactly the same reasons as the above mentioned commit, namely to prevent panics during netfilter reload or a misconfigured stack. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: gre: setup default multicast routes over PtP linksHannes Frederic Sowa2015-10-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | GRE point-to-point interfaces should also support ipv6 multicast. Setting up default multicast routes on interface creation was forgotten. Add it. Bugzilla: <https://bugzilla.kernel.org/show_bug.cgi?id=103231> Cc: Julien Muchembled <jm@jmuchemb.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dumazet <ndumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sch_hhf: fix return value of hhf_drop()WANG Cong2015-10-111-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Similar to commit c0afd9ce4d6a ("fq_codel: fix return value of fq_codel_drop()") ->drop() is supposed to return the number of bytes it dropped, but hhf_drop () returns the id of the bucket where it drops a packet from. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Terry Lam <vtlam@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bpf: clear sender_cpu before xmitAlexei Starovoitov2015-10-081-0/+1
| | | | | | | | | | | | | | | | | | | | Similar to commit c29390c6dfee ("xps: must clear sender_cpu before forwarding") the skb->sender_cpu needs to be cleared before xmit. Fixes: 3896d655f4d4 ("bpf: introduce bpf_clone_redirect() helper") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | act_mirred: clear sender cpu before sending to txWANG Cong2015-10-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to commit c29390c6dfee ("xps: must clear sender_cpu before forwarding") the skb->sender_cpu needs to be cleared when moving from Rx Tx, otherwise kernel could crash. Fixes: 2bd82484bb4c ("xps: fix xps for stacked devices") Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Change CT_ATTR_FLAGS to CT_ATTR_COMMITJoe Stringer2015-10-071-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the CT_ATTR_FLAGS attribute, when nested under the OVS_ACTION_ATTR_CT, encoded a 32-bit bitmask of flags that modify the semantics of the ct action. It's more extensible to just represent each flag as a nested attribute, and this requires no additional error checking to reject flags that aren't currently supported. Suggested-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Extend ct_state match field to 32 bitsJoe Stringer2015-10-073-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ct_state field was initially added as an 8-bit field, however six of the bits are already being used and use cases are already starting to appear that may push the limits of this field. This patch extends the field to 32 bits while retaining the internal representation of 8 bits. This should cover forward compatibility of the ABI for the foreseeable future. This patch also reorders the OVS_CS_F_* bits to be sequential. Suggested-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Reject ct_state unsupported bitsJoe Stringer2015-10-072-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, if userspace specified ct_state bits in the flow key which are currently undefined (and therefore unsupported), then they would be ignored. This could cause unexpected behaviour in future if userspace is extended to support additional bits but attempts to communicate with the current version of the kernel. This patch rectifies the situation by rejecting such ct_state bits. Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Ensure flow is valid before executing ctJoe Stringer2015-10-071-0/+6
| | | | | | | | | | | | | | | | | | | | The ct action uses parts of the flow key, so we need to ensure that it is valid before executing that action. Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Fix skb leak in ovs_fragment()Joe Stringer2015-10-071-4/+7
| | | | | | | | | | | | | | | | | | | | If ovs_fragment() was unable to fragment the skb due to an L2 header that exceeds the supported length, skbs would be leaked. Fix the bug. Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: exit probe if no switch were foundNeil Armstrong2015-10-071-3/+16
| | | | | | | | | | | | | | | | If no switch were found in dsa_setup_dst, return -ENODEV and exit the dsa_probe cleanly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: switch to devm_ calls and remove kfree callsNeil Armstrong2015-10-071-12/+5
| | | | | | | | | | | | | | | | | | | | Now the kfree calls exists in the the remove functions, remove them in all places except the of_probe functions and replace allocation calls with their devm_ counterparts. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: complete dsa_switch_destroyNeil Armstrong2015-10-071-0/+37
| | | | | | | | | | | | | | | | | | When unbinding dsa, complete the dsa_switch_destroy to unregister the fixed link phy then cleanly unregister and destroy the net devices. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: add missing dsa_switch mdiobus removeNeil Armstrong2015-10-071-0/+2
| | | | | | | | | | | | | | | | | | To prevent memory leakage on unbinding, add missing mdiobus unregister and unallocation calls. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: add missing kfree on removeNeil Armstrong2015-10-071-1/+4
| | | | | | | | | | | | | | | | To prevent memory leakage on unbinding, add missing kfree calls. Includes minor cosmetic change to make patch clean. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Fix vti use case with oif in dst lookups for IPv6David Ahern2015-10-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | It occurred to me yesterday that 741a11d9e4103 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7b274 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Fix ovs_vport_get_stats()Pravin B Shelar2015-10-051-29/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not every device has dev->tstats set. So when OVS tries to calculate vport stats it causes kernel panic. Following patch fixes it by using standard API to get net-device stats. ---8<--- Unable to handle kernel paging request at virtual address 766b4008 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: vport_vxlan vxlan ip6_udp_tunnel udp_tunnel tun bridge stp llc openvswitch ipv6 CPU: 7 PID: 1108 Comm: ovs-vswitchd Not tainted 4.3.0-rc3+ #82 PC is at ovs_vport_get_stats+0x150/0x1f8 [openvswitch] <snip> Call trace: [<ffffffbffc0859f8>] ovs_vport_get_stats+0x150/0x1f8 [openvswitch] [<ffffffbffc07cdb0>] ovs_vport_cmd_fill_info+0x140/0x1e0 [openvswitch] [<ffffffbffc07cf0c>] ovs_vport_cmd_dump+0xbc/0x138 [openvswitch] [<ffffffc00045a5ac>] netlink_dump+0xb8/0x258 [<ffffffc00045ace0>] __netlink_dump_start+0x120/0x178 [<ffffffc00045dd9c>] genl_family_rcv_msg+0x2d4/0x308 [<ffffffc00045de58>] genl_rcv_msg+0x88/0xc4 [<ffffffc00045cf24>] netlink_rcv_skb+0xd4/0x100 [<ffffffc00045dab0>] genl_rcv+0x30/0x48 [<ffffffc00045c830>] netlink_unicast+0x154/0x200 [<ffffffc00045cc9c>] netlink_sendmsg+0x308/0x364 [<ffffffc00041e10c>] sock_sendmsg+0x14/0x2c [<ffffffc000420d58>] SyS_sendto+0xbc/0xf0 Code: aa1603e1 f94037a4 aa1303e2 aa1703e0 (f9400465) Reported-by: Tomasz Sawicki <tomasz.sawicki@objectiveintegration.uk> Fixes: 8c876639c98 ("openvswitch: Remove vport stats.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ovs: do not allocate memory from offline numa nodeKonstantin Khlebnikov2015-10-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | When openvswitch tries allocate memory from offline numa node 0: stats = kmem_cache_alloc_node(flow_stats_cache, GFP_KERNEL | __GFP_ZERO, 0) It catches VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid)) [ replaced with VM_WARN_ON(!node_online(nid)) recently ] in linux/gfp.h This patch disables numa affinity in this case. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bpf: fix panic in SO_GET_FILTER with native ebpf programsDaniel Borkmann2015-10-051-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When sockets have a native eBPF program attached through setsockopt(sk, SOL_SOCKET, SO_ATTACH_BPF, ...), and then try to dump these over getsockopt(sk, SOL_SOCKET, SO_GET_FILTER, ...), the following panic appears: [49904.178642] BUG: unable to handle kernel NULL pointer dereference at (null) [49904.178762] IP: [<ffffffff81610fd9>] sk_get_filter+0x39/0x90 [49904.182000] PGD 86fc9067 PUD 531a1067 PMD 0 [49904.185196] Oops: 0000 [#1] SMP [...] [49904.224677] Call Trace: [49904.226090] [<ffffffff815e3d49>] sock_getsockopt+0x319/0x740 [49904.227535] [<ffffffff812f59e3>] ? sock_has_perm+0x63/0x70 [49904.228953] [<ffffffff815e2fc8>] ? release_sock+0x108/0x150 [49904.230380] [<ffffffff812f5a43>] ? selinux_socket_getsockopt+0x23/0x30 [49904.231788] [<ffffffff815dff36>] SyS_getsockopt+0xa6/0xc0 [49904.233267] [<ffffffff8171b9ae>] entry_SYSCALL_64_fastpath+0x12/0x71 The underlying issue is the very same as in commit b382c0865600 ("sock, diag: fix panic in sock_diag_put_filterinfo"), that is, native eBPF programs don't store an original program since this is only needed in cBPF ones. However, sk_get_filter() wasn't updated to test for this at the time when eBPF could be attached. Just throw an error to the user to indicate that eBPF cannot be dumped over this interface. That way, it can also be known that a program _is_ attached (as opposed to just return 0), and a different (future) method needs to be consulted for a dump. Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Rename LABEL->LABELSJoe Stringer2015-10-055-49/+49
| | | | | | | | | | | | | | | | | | | | Conntrack LABELS (plural) are exposed by conntrack; rename the OVS name for these to be consistent with conntrack. Fixes: c2ac667 "openvswitch: Allow matching on conntrack label" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/unix: fix logic about sk_peek_offsetAndrey Vagin2015-10-051-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now send with MSG_PEEK can return data from multiple SKBs. Unfortunately we take into account the peek offset for each skb, that is wrong. We need to apply the peek offset only once. In addition, the peek offset should be used only if MSG_PEEK is set. Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%) Cc: Aaron Conole <aconole@bytheb.org> Fixes: 9f389e35674f ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Signed-off-by: Andrey Vagin <avagin@openvz.org> Tested-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | act_mirred: always release tcf hashWANG Cong2015-10-051-3/+3
| | | | | | | | | | | | | | | | | | | | Align with other tc actions. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | act_mirred: fix a race condition on mirred_listWANG Cong2015-10-051-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 1ce87720d456 ("net: sched: make cls_u32 lockless") we began to release tc actions in a RCU callback. However, mirred action relies on RTNL lock to protect the global mirred_list, therefore we could have a race condition between RCU callback and netdevice event, which caused a list corruption as reported by Vinson. Instead of relying on RTNL lock, introduce a spinlock to protect this list. Note, in non-bind case, it is still called with RTNL lock, therefore should disable BH too. Reported-by: Vinson Lee <vlee@twopensource.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv4: fix reply_dst leakage on arp replyJiri Benc2015-10-051-3/+5
| | | | | | | | | | | | | | | | | | | | There are cases when the created metadata reply is not used. Ensure the allocated memory is freed also in such cases. Fixes: 63d008a4e9ee ("ipv4: send arp replies to the correct tunnel") Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | inet: fix race in reqsk_queue_unlink()Eric Dumazet2015-10-051-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | reqsk_timer_handler() tests if icsk_accept_queue.listen_opt is NULL at its beginning. By the time it calls inet_csk_reqsk_queue_drop() and reqsk_queue_unlink(), listener might have been closed and inet_csk_listen_stop() had called reqsk_queue_yank_acceptq() which sets icsk_accept_queue.listen_opt to NULL We therefore need to correctly check listen_opt being NULL after holding syn_wait_lock for proper synchronization. Fixes: fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer") Fixes: b357a364c57c ("inet: fix possible panic in reqsk_queue_unlink()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-10-0110-42/+76
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix regression in SKB partial checksum handling, from Pravin B Shalar. 2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse Brandeburg. 3) Cure softlockups during accept() in SCTP, from Karl Heiss. 4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from Aaron Conole. 5) IPV6 erroneously ignores output interface specifier in lookup key for route lookups, fix from David Ahern. 6) In Marvell DSA driver, forward unknown frames to CPU port, from Andrew Lunn. 7) Mission flow flag initializations in some code paths, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Initialize flow flags in input path net: dsa: fix preparation of a port STP update testptp: Silence compiler warnings on ppc64 net/mlx4: Handle return codes in mlx4_qp_attach_common dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port skbuff: Fix skb checksum partial check. net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set net sysfs: Print link speed as signed integer bna: fix error handling af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag af_unix: Convert the unix_sk macro to an inline function for type safety net: sctp: Don't use 64 kilobyte lookup table for four elements l2tp: protect tunnel->del_work by ref_count net/ibm/emac: bump version numbers for correct work with ethtool sctp: Prevent soft lockup when sctp_accept() is called during a timeout event sctp: Whitespace fix i40e/i40evf: check for stopped admin queue i40e: fix VLAN inside VXLAN r8169: fix handling rtl_readphy result net: hisilicon: fix handling platform_get_irq result
| * | net: Initialize flow flags in input pathDavid Ahern2015-09-292-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The fib_table_lookup tracepoint found 2 places where the flowi4_flags is not initialized. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: dsa: fix preparation of a port STP updateVivien Didelot2015-09-291-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because of the default 0 value of ret in dsa_slave_port_attr_set, a driver may return -EOPNOTSUPP from the commit phase of a STP state, which triggers a WARN() from switchdev. This happened on a 6185 switch which does not support hardware bridging. Fixes: 3563606258cf ("switchdev: convert STP update to switchdev attr set") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | skbuff: Fix skb checksum partial check.Pravin B Shelar2015-09-291-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier patch 6ae459bda tried to detect void ckecksum partial skb by comparing pull length to checksum offset. But it does not work for all cases since checksum-offset depends on updates to skb->data. Following patch fixes it by validating checksum start offset after skb-data pointer is updated. Negative value of checksum offset start means there is no need to checksum. Fixes: 6ae459bda ("skbuff: Fix skb checksum flag on skb pull") Reported-by: Andrew Vagin <avagin@odin.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is setDavid Ahern2015-09-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wolfgang reported that IPv6 stack is ignoring oif in output route lookups: With ipv6, ip -6 route get always returns the specific route. $ ip -6 r 2001:db8:e2::1 dev enp2s0 proto kernel metric 256 2001:db8:e2::/64 dev enp2s0 metric 1024 2001:db8:e3::1 dev enp3s0 proto kernel metric 256 2001:db8:e3::/64 dev enp3s0 metric 1024 fe80::/64 dev enp3s0 proto kernel metric 256 default via 2001:db8:e3::255 dev enp3s0 metric 1024 $ ip -6 r get 2001:db8:e2::100 2001:db8:e2::100 from :: dev enp2s0 src 2001:db8:e3::1 metric 0 cache $ ip -6 r get 2001:db8:e2::100 oif enp3s0 2001:db8:e2::100 from :: dev enp2s0 src 2001:db8:e3::1 metric 0 cache The stack does consider the oif but a mismatch in rt6_device_match is not considered fatal because RT6_LOOKUP_F_IFACE is not set in the flags. Cc: Wolfgang Nothdurft <netdev@linux-dude.de> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net sysfs: Print link speed as signed integerAlexander Stein2015-09-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise 4294967295 (MBit/s) (-1) will be printed when there is no link. Documentation/ABI/testing/sysfs-class-net does not state if this shall be signed or unsigned. Also remove the now unused variable fmt_udec. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | af_unix: return data from multiple SKBs on recv() with MSG_PEEK flagAaron Conole2015-09-291-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag is set. This is referenced in kernel bugzilla #12323 @ https://bugzilla.kernel.org/show_bug.cgi?id=12323 As described both in the BZ and lkml thread @ http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an AF_UNIX socket only reads a single skb, where the desired effect is to return as much skb data has been queued, until hitting the recv buffer size (whichever comes first). The modified MSG_PEEK path will now move to the next skb in the tree and jump to the again: label, rather than following the natural loop structure. This requires duplicating some of the loop head actions. This was tested using the python socketpair python code attached to the bugzilla issue. Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: sctp: Don't use 64 kilobyte lookup table for four elementsDenys Vlasenko2015-09-281-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Seemingly innocuous sctp_trans_state_to_prio_map[] array is way bigger than it looks, since "[SCTP_UNKNOWN] = 2" expands into "[0xffff] = 2" ! This patch replaces it with switch() statement. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: linux-sctp@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | l2tp: protect tunnel->del_work by ref_countAlexander Couzens2015-09-281-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is a small chance that tunnel_free() is called before tunnel->del_work scheduled resulting in a zero pointer dereference. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sctp: Prevent soft lockup when sctp_accept() is called during a timeout eventKarl Heiss2015-09-281-19/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A case can occur when sctp_accept() is called by the user during a heartbeat timeout event after the 4-way handshake. Since sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the bh_sock_lock in sctp_generate_heartbeat_event() will be taken with the listening socket but released with the new association socket. The result is a deadlock on any future attempts to take the listening socket lock. Note that this race can occur with other SCTP timeouts that take the bh_lock_sock() in the event sctp_accept() is called. BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0] ... RIP: 0010:[<ffffffff8152d48e>] [<ffffffff8152d48e>] _spin_lock+0x1e/0x30 RSP: 0018:ffff880028323b20 EFLAGS: 00000206 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225 FS: 0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0) Stack: ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8 Call Trace: <IRQ> [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp] [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440 [<ffffffff81497255>] ? ip_rcv+0x275/0x350 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750 ... With lockdep debugging: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- CslRx/12087 is trying to release lock (slock-AF_INET) at: [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp] but there are no more locks to release! other info that might help us debug this: 2 locks held by CslRx/12087: #0: (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0 #1: (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp] Ensure the socket taken is also the same one that is released by saving a copy of the socket before entering the timeout event critical section. Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sctp: Whitespace fixKarl Heiss2015-09-281-2/+2
| | | | | | | | | | | | | | | | | | | | | Fix indentation in sctp_generate_heartbeat_event. Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge tag 'for-linus' of ↵Linus Torvalds2015-10-015-35/+2
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - Fixes for mlx5 related issues - Fixes for ipoib multicast handling * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/ipoib: increase the max mcast backlog queue IB/ipoib: Make sendonly multicast joins create the mcast group IB/ipoib: Expire sendonly multicast joins IB/mlx5: Remove pa_lkey usages IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEY IB/iser: Add module parameter for always register memory xprtrdma: Replace global lkey with lkey local to PD
| * | xprtrdma: Replace global lkey with lkey local to PDChuck Lever2015-09-255-35/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core API has changed so that devices that do not have a global DMA lkey automatically create an mr, per-PD, and make that lkey available. The global DMA lkey interface is going away in favor of the per-PD DMA lkey. The per-PD DMA lkey is always available. Convert xprtrdma to use the device's per-PD DMA lkey for regbufs, no matter which memory registration scheme is in use. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: linux-nfs <linux-nfs@vger.kernel.org> Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-09-2648-341/+644
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 02:10:29 +0000