summaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
* act_mirred: clear skb->tstamp on redirectEric Dumazet2018-11-112-10/+2
| | | | | | | | | | | | | If sch_fq is used at ingress, skbs that might have been timestamped by net_timestamp_set() if a packet capture is requesting timestamps could be delayed by arbitrary amount of time, since sch_fq time base is MONOTONIC. Fix this problem by moving code from sch_netem.c to act_mirred.c. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix link re-establish failureJon Maloy2018-11-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a link failure is detected locally, the link is reset, the flag link->in_session is set to false, and a RESET_MSG with the 'stopping' bit set is sent to the peer. The purpose of this bit is to inform the peer that this endpoint just is going down, and that the peer should handle the reception of this particular RESET message as a local failure. This forces the peer to accept another RESET or ACTIVATE message from this endpoint before it can re-establish the link. This again is necessary to ensure that link session numbers are properly exchanged before the link comes up again. If a failure is detected locally at the same time at the peer endpoint this will do the same, which is also a correct behavior. However, when receiving such messages, the endpoints will not distinguish between 'stopping' RESETs and ordinary ones when it comes to updating session numbers. Both endpoints will copy the received session number and set their 'in_session' flags to true at the reception, while they are still expecting another RESET from the peer before they can go ahead and re-establish. This is contradictory, since, after applying the validation check referred to below, the 'in_session' flag will cause rejection of all such messages, and the link will never come up again. We now fix this by not only handling received RESET/STOPPING messages as a local failure, but also by omitting to set a new session number and the 'in_session' flag in such cases. Fixes: 7ea817f4e832 ("tipc: check session number before accepting link protocol messages") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sched: cls_flower: validate nested enc_opts_policy to avoid warningJakub Kicinski2018-11-101-1/+13
| | | | | | | | | | | | | | | | | | | | | TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only currently contain further nested attributes, which are parsed by hand, so the policy is never actually used resulting in a W=1 build warning: net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=] enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = { Add the validation anyway to avoid potential bugs when other attributes are added and to make the attribute structure slightly more clear. Validation will also set extact to point to bad attribute on error. Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* flow_dissector: do not dissect l4 ports for fragments배석진2018-11-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed3741 ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: 배석진 <soukjin.bae@samsung.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: frags: better deal with smp racesEric Dumazet2018-11-081-14/+15
| | | | | | | | | | | | | | | | Multiple cpus might attempt to insert a new fragment in rhashtable, if for example RPS is buggy, as reported by 배석진 in https://patchwork.ozlabs.org/patch/994601/ We use rhashtable_lookup_get_insert_key() instead of rhashtable_insert_fast() to let cpus losing the race free their own inet_frag_queue and use the one that was inserted by another cpu. Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: 배석진 <soukjin.bae@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2018-11-0632-268/+302
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Handle errors mid-stream of an all dump, from Alexey Kodanev. 2) Fix build of openvswitch with certain combinations of netfilter options, from Arnd Bergmann. 3) Fix interactions between GSO and BQL, from Eric Dumazet. 4) Don't put a '/' in RTL8201F's sysfs file name, from Holger Hoffstätte. 5) S390 qeth driver fixes from Julian Wiedmann. 6) Allow ipv6 link local addresses for netconsole when both source and destination are link local, from Matwey V. Kornilov. 7) Fix the BPF program address seen in /proc/kallsyms, from Song Liu. 8) Initialize mutex before use in dsa microchip driver, from Tristram Ha. 9) Out-of-bounds access in hns3, from Yunsheng Lin. 10) Various netfilter fixes from Stefano Brivio, Jozsef Kadlecsik, Jiri Slaby, Florian Westphal, Eric Westbrook, Andrey Ryabinin, and Pablo Neira Ayuso. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (50 commits) net: alx: make alx_drv_name static net: bpfilter: fix iptables failure if bpfilter_umh is disabled sock_diag: fix autoloading of the raw_diag module net: core: netpoll: Enable netconsole IPv6 link local address ipv6: properly check return value in inet6_dump_all() rtnetlink: restore handling of dumpit return value in rtnl_dump_all() net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FS bonding/802.3ad: fix link_failure_count tracking net: phy: realtek: fix RTL8201F sysfs name sctp: define SCTP_SS_DEFAULT for Stream schedulers sctp: fix strchange_flags name for Stream Change Event mlxsw: spectrum: Fix IP2ME CPU policer configuration openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS qed: fix link config error handling net: hns3: Fix for out-of-bounds access when setting pfc back pressure net/mlx4_en: use __netdev_tx_sent_queue() net: do not abort bulk send on BQL status net: bql: add __netdev_tx_sent_queue() s390/qeth: report 25Gbit link speed s390/qeth: sanitize ARP requests ...
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2018-11-0517-242/+152
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains the first batch of Netfilter fixes for your net tree: 1) Fix splat with IPv6 defragmenting locally generated fragments, from Florian Westphal. 2) Fix Incorrect check for missing attribute in nft_osf. 3) Missing INT_MIN & INT_MAX definition for netfilter bridge uapi header, from Jiri Slaby. 4) Revert map lookup in nft_numgen, this is already possible with the existing infrastructure without this extension. 5) Fix wrong listing of set reference counter, make counter synchronous again, from Stefano Brivio. 6) Fix CIDR 0 in hash:net,port,net, from Eric Westbrook. 7) Fix allocation failure with large set, use kvcalloc(). From Andrey Ryabinin. 8) No need to disable BH when fetch ip set comment, patch from Jozsef Kadlecsik. 9) Sanity check for valid sysfs entry in xt_IDLETIMER, from Taehee Yoo. 10) Fix suspicious rcu usage via ip_set() macro at netlink dump, from Jozsef Kadlecsik. 11) Fix setting default timeout via nfnetlink_cttimeout, this comes with preparation patch to add nf_{tcp,udp,...}_pernet() helper. 12) Allow ebtables table nat to be of filter type via nft_compat. From Florian Westphal. 13) Incorrect calculation of next bucket in early_drop, do no bump hash value, update bucket counter instead. From Vasily Khoruzhick. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * netfilter: conntrack: fix calculation of next bucket number in early_dropVasily Khoruzhick2018-11-031-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there's no entry to drop in bucket that corresponds to the hash, early_drop() should look for it in other buckets. But since it increments hash instead of bucket number, it actually looks in the same bucket 8 times: hsize is 16k by default (14 bits) and hash is 32-bit value, so reciprocal_scale(hash, hsize) returns the same value for hash..hash+7 in most cases. Fix it by increasing bucket number instead of hash and rename _hash to bucket to avoid future confusion. Fixes: 3e86638e9a0b ("netfilter: conntrack: consider ct netns in early_drop logic") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: nft_compat: ebtables 'nat' table is normal chain typeFlorian Westphal2018-11-031-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlike ip(6)tables, the ebtables nat table has no special properties. This bug causes 'ebtables -A' to fail when using a target such as 'snat' (ebt_snat target sets ".table = "nat"'). Targets that have no table restrictions work fine. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattrPablo Neira Ayuso2018-11-031-7/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise, we hit a NULL pointer deference since handlers always assume default timeout policy is passed. netlink: 24 bytes leftover after parsing attributes in process `syz-executor2'. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9575 Comm: syz-executor1 Not tainted 4.19.0+ #312 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:icmp_timeout_obj_to_nlattr+0x77/0x170 net/netfilter/nf_conntrack_proto_icmp.c:297 Fixes: c779e849608a ("netfilter: conntrack: remove get_timeout() indirection") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: conntrack: add nf_{tcp,udp,sctp,icmp,dccp,icmpv6,generic}_pernet()Pablo Neira Ayuso2018-11-037-59/+24
| | | | | | | | | | | | | | | | | | | | | Expose these functions to access conntrack protocol tracker netns area, nfnetlink_cttimeout needs this. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: ipset: Fix calling ip_set() macro at dumpingJozsef Kadlecsik2018-11-031-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ip_set() macro is called when either ip_set_ref_lock held only or no lock/nfnl mutex is held at dumping. Take this into account properly. Also, use Pablo's suggestion to use rcu_dereference_raw(), the ref_netlink protects the set. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: xt_IDLETIMER: add sysfs filename checking routineTaehee Yoo2018-11-031-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When IDLETIMER rule is added, sysfs file is created under /sys/class/xt_idletimer/timers/ But some label name shouldn't be used. ".", "..", "power", "uevent", "subsystem", etc... So that sysfs filename checking routine is needed. test commands: %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power" splat looks like: [95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power' [95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20 [95765.449755] Call Trace: [95765.449755] dump_stack+0xc9/0x16b [95765.449755] ? show_regs_print_info+0x5/0x5 [95765.449755] sysfs_warn_dup+0x74/0x90 [95765.449755] sysfs_add_file_mode_ns+0x352/0x500 [95765.449755] sysfs_create_file_ns+0x179/0x270 [95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500 [95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER] [95765.449755] ? rcu_read_lock_sched_held+0x114/0x130 [95765.449755] ? __kmalloc_track_caller+0x211/0x2b0 [95765.449755] ? memcpy+0x34/0x50 [95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER] [ ... ] Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: ipset: fix ip_set_list allocation failureAndrey Ryabinin2018-11-011-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ip_set_create() and ip_set_net_init() attempt to allocate physically contiguous memory for ip_set_list. If memory is fragmented, the allocations could easily fail: vzctl: page allocation failure: order:7, mode:0xc0d0 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0x110/0x180 __alloc_pages_nodemask+0x7bf/0xc60 alloc_pages_current+0x98/0x110 kmalloc_order+0x18/0x40 kmalloc_order_trace+0x26/0xa0 __kmalloc+0x279/0x290 ip_set_net_init+0x4b/0x90 [ip_set] ops_init+0x3b/0xb0 setup_net+0xbb/0x170 copy_net_ns+0xf1/0x1c0 create_new_namespaces+0xf9/0x180 copy_namespaces+0x8e/0xd0 copy_process+0xb61/0x1a00 do_fork+0x91/0x320 Use kvcalloc() to fallback to 0-order allocations if high order page isn't available. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,netEric Westbrook2018-11-011-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow /0 as advertised for hash:net,port,net sets. For "hash:net,port,net", ipset(8) says that "either subnet is permitted to be a /0 should you wish to match port between all destinations." Make that statement true. Before: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid After: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 # ipset test cidrzero 192.168.205.129,12345,172.16.205.129 192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero. # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 # ipset test cidrzero6 fe80::1,12345,ff00::1 fe80::1,tcp:12345,ff00::1 is in set cidrzero6. See also: https://bugzilla.kernel.org/show_bug.cgi?id=200897 https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c Signed-off-by: Eric Westbrook <linux@westbrook.io> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: ipset: list:set: Decrease refcount synchronously on deletion and ↵Stefano Brivio2018-11-012-18/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | replace Commit 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") postponed decreasing set reference counters to the RCU callback. An 'ipset del' command can terminate before the RCU grace period is elapsed, and if sets are listed before then, the reference counter shown in userspace will be wrong: # ipset create h hash:ip; ipset create l list:set; ipset add l # ipset del l h; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 1 Number of entries: 0 Members: # sleep 1; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 0 Number of entries: 0 Members: Fix this by making the reference count update synchronous again. As a result, when sets are listed, ip_set_name_byindex() might now fetch a set whose reference count is already zero. Instead of relying on the reference count to protect against concurrent set renaming, grab ip_set_ref_lock as reader and copy the name, while holding the same lock in ip_set_rename() as writer instead. Reported-by: Li Shuang <shuali@redhat.com> Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * Revert "netfilter: nft_numgen: add map lookups for numgen random operations"Pablo Neira Ayuso2018-10-291-127/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Laura found a better way to do this from userspace without requiring kernel infrastructure, revert this. Fixes: 978d8f9055c3 ("netfilter: nft_numgen: add map lookups for numgen random operations") Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: nft_osf: check if attribute is presentPablo Neira Ayuso2018-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | If the attribute is not sent, eg. old libnftnl binary, then tb[NFTA_OSF_TTL] is NULL and kernel crashes from the _init path. Fixes: a218dc82f0b5 ("netfilter: nft_osf: Add ttl option support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: ipv6: fix oops when defragmenting locally generated fragmentsFlorian Westphal2018-10-251-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlike ipv4 and normal ipv6 defrag, netfilter ipv6 defragmentation did not save/restore skb->dst. This causes oops when handling locally generated ipv6 fragments, as output path needs a valid dst. Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Fixes: 84379c9afe01 ("netfilter: ipv6: nf_defrag: drop skb dst before queueing") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | net: bpfilter: fix iptables failure if bpfilter_umh is disabledTaehee Yoo2018-11-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iptables command is executed, ip_{set/get}sockopt() try to upload bpfilter.ko if bpfilter is enabled. if it couldn't find bpfilter.ko, command is failed. bpfilter.ko is generated if CONFIG_BPFILTER_UMH is enabled. ip_{set/get}sockopt() only checks CONFIG_BPFILTER. So that if CONFIG_BPFILTER is enabled and CONFIG_BPFILTER_UMH is disabled, iptables command is always failed. test config: CONFIG_BPFILTER=y # CONFIG_BPFILTER_UMH is not set test command: %iptables -L iptables: No chain/target/match by that name. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sock_diag: fix autoloading of the raw_diag moduleAndrei Vagin2018-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IPPROTO_RAW isn't registred as an inet protocol, so inet_protos[protocol] is always NULL for it. Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Fixes: bf2ae2e4bf93 ("sock_diag: request _diag module only when the family or proto has been registered") Signed-off-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: core: netpoll: Enable netconsole IPv6 link local addressMatwey V. Kornilov2018-11-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to discard using source link local address when remote netconsole IPv6 address is set to be link local one. The patch allows administrators to use IPv6 netconsole without explicitly configuring source address: netconsole=@/,@fe80::5054:ff:fe2f:6012/ Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: properly check return value in inet6_dump_all()Alexey Kodanev2018-11-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure we call fib6_dump_end() if it happens that skb->len is zero. rtnl_dump_all() can reset cb->args on the next loop iteration there. Fixes: 08e814c9e8eb ("net/ipv6: Bail early if user only wants cloned entries") Fixes: ae677bbb4441 ("net: Don't return invalid table id error when dumping all families") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | rtnetlink: restore handling of dumpit return value in rtnl_dump_all()Alexey Kodanev2018-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For non-zero return from dumpit() we should break the loop in rtnl_dump_all() and return the result. Otherwise, e.g., we could get the memory leak in inet6_dump_fib() [1]. The pointer to the allocated struct fib6_walker there (saved in cb->args) can be lost, reset on the next iteration. Fix it by partially restoring the previous behavior before commit c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function"). The returned error from dumpit() is still passed further. [1]: unreferenced object 0xffff88001322a200 (size 96): comm "sshd", pid 1484, jiffies 4296032768 (age 1432.542s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 18 09 41 36 00 88 ff ff 18 09 41 36 00 88 ff ff ..A6......A6.... backtrace: [<0000000095846b39>] kmem_cache_alloc_trace+0x151/0x220 [<000000007d12709f>] inet6_dump_fib+0x68d/0x940 [<000000002775a316>] rtnl_dump_all+0x1d9/0x2d0 [<00000000d7cd302b>] netlink_dump+0x945/0x11a0 [<000000002f43485f>] __netlink_dump_start+0x55d/0x800 [<00000000f76bbeec>] rtnetlink_rcv_msg+0x4fa/0xa00 [<000000009b5761f3>] netlink_rcv_skb+0x29c/0x420 [<0000000087a1dae1>] rtnetlink_rcv+0x15/0x20 [<00000000691b703b>] netlink_unicast+0x4e3/0x6c0 [<00000000b5be0204>] netlink_sendmsg+0x7f2/0xba0 [<0000000096d2aa60>] sock_sendmsg+0xba/0xf0 [<000000008c1b786f>] __sys_sendto+0x1e4/0x330 [<0000000019587b3f>] __x64_sys_sendto+0xe1/0x1a0 [<00000000071f4d56>] do_syscall_64+0x9f/0x300 [<000000002737577f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<0000000057587684>] 0xffffffffffffffff Fixes: c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FSJeff Barnhill2018-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the anycast.c init and cleanup functions which were inadvertently added inside the CONFIG_PROC_FS definition. Fixes: 2384d02520ff ("net/ipv6: Add anycast addresses to a global hashtable") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sctp: define SCTP_SS_DEFAULT for Stream schedulersXin Long2018-11-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to defined as SCTP_SS_FCFS or SCTP_SS_RR. SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELSArnd Bergmann2018-11-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler fails to optimize out a dead code path, which leads to a link failure: net/openvswitch/conntrack.o: In function `ovs_ct_set_labels': conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace' In this configuration, we can take a shortcut, and completely remove the contrack label code. This may also help the regular optimization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: do not abort bulk send on BQL statusEric Dumazet2018-11-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before calling dev_hard_start_xmit(), upper layers tried to cook optimal skb list based on BQL budget. Problem is that GSO packets can end up comsuming more than the BQL budget. Breaking the loop is not useful, since requeued packets are ahead of any packets still in the qdisc. It is also more expensive, since next TX completion will push these packets later, while skbs are not in cpu caches. It is also a behavior difference with TSO packets, that can break the BQL limit by a large amount. Note that drivers should use __netdev_tx_sent_queue() in order to have optimal xmit_more support, and avoid useless atomic operations as shown in the following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | rxrpc: Fix lockup due to no error backoff after ack transmit errorDavid Howells2018-11-023-8/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the network becomes (partially) unavailable, say by disabling IPv6, the background ACK transmission routine can get itself into a tizzy by proposing immediate ACK retransmission. Since we're in the call event processor, that happens immediately without returning to the workqueue manager. The condition should clear after a while when either the network comes back or the call times out. Fix this by: (1) When re-proposing an ACK on failed Tx, don't schedule it immediately. This will allow a certain amount of time to elapse before we try again. (2) Enforce a return to the workqueue manager after a certain number of iterations of the call processing loop. (3) Add a backoff delay that increases the delay on deferred ACKs by a jiffy per failed transmission to a limit of HZ. The backoff delay is cleared on a successful return from kernel_sendmsg(). (4) Cancel calls immediately if the opening sendmsg fails. The layer above can arrange retransmission or rotate to another server. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/ipv6: Add anycast addresses to a global hashtableJeff Barnhill2018-11-022-4/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | icmp6_send() function is expensive on systems with a large number of interfaces. Every time it’s called, it has to verify that the source address does not correspond to an existing anycast address by looping through every device and every anycast address on the device. This can result in significant delays for a CPU when there are a large number of neighbors and ND timers are frequently timing out and calling neigh_invalidate(). Add anycast addresses to a global hashtable to allow quick searching for matching anycast addresses. This is based on inet6_addr_lst in addrconf.c. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: document skb parameter in function 'skb_gso_size_check'Mathieu Malaterre2018-11-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove kernel-doc warning: net/core/skbuff.c:4953: warning: Function parameter or member 'skb' not described in 'skb_gso_size_check' Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: drop skb on failure in ip_check_defrag()Cong Wang2018-11-011-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most callers of pskb_trim_rcsum() simply drop the skb when it fails, however, ip_check_defrag() still continues to pass the skb up to stack. This is suspicious. In ip_check_defrag(), after we learn the skb is an IP fragment, passing the skb to callers makes no sense, because callers expect fragments are defrag'ed on success. So, dropping the skb when we can't defrag it is reasonable. Note, prior to commit 88078d98d1bb, this is not a big problem as checksum will be fixed up anyway. After it, the checksum is not correct on failure. Found this during code review. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2018-11-043-34/+14
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
| * | | SUNRPC: Use atomic(64)_t for seq_send(64)Paul Burton2018-11-013-34/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The seq_send & seq_send64 fields in struct krb5_ctx are used as atomically incrementing counters. This is implemented using cmpxchg() & cmpxchg64() to implement what amount to custom versions of atomic_fetch_inc() & atomic64_fetch_inc(). Besides the duplication, using cmpxchg64() has another major drawback in that some 32 bit architectures don't provide it. As such commit 571ed1fd2390 ("SUNRPC: Replace krb5_seq_lock with a lockless scheme") resulted in build failures for some architectures. Change seq_send to be an atomic_t and seq_send64 to be an atomic64_t, then use atomic(64)_* functions to manipulate the values. The atomic64_t type & associated functions are provided even on architectures which lack real 64 bit atomic memory access via CONFIG_GENERIC_ATOMIC64 which uses spinlocks to serialize access. This fixes the build failures for architectures lacking cmpxchg64(). A potential alternative that was raised would be to provide cmpxchg64() on the 32 bit architectures that currently lack it, using spinlocks. However this would provide a version of cmpxchg64() with semantics a little different to the implementations on architectures with real 64 bit atomics - the spinlock-based implementation would only work if all access to the memory used with cmpxchg64() is *always* performed using cmpxchg64(). That is not currently a requirement for users of cmpxchg64(), and making it one seems questionable. As such avoiding cmpxchg64() outside of architecture-specific code seems best, particularly in cases where atomic64_t seems like a better fit anyway. The CONFIG_GENERIC_ATOMIC64 implementation of atomic64_* functions will use spinlocks & so faces the same issue, but with the key difference that the memory backing an atomic64_t ought to always be accessed via the atomic64_* functions anyway making the issue moot. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 571ed1fd2390 ("SUNRPC: Replace krb5_seq_lock with a lockless scheme") Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
* | | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2018-11-032-4/+0
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
| * \ \ \ Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar2018-11-0332-823/+1006
| |\ \ \ \ | | | | | | | | | | | | | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | compat: Cleanup in_compat_syscall() callersDmitry Safonov2018-11-012-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that in_compat_syscall() is consistent on all architectures and does not longer report true on native i686, the workarounds (ifdeffery and helpers) can be removed. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: John Stultz <john.stultz@linaro.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-efi@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lkml.kernel.org/r/20181012134253.23266-3-dima@arista.com
* | | | | | Merge branch 'work.afs' of ↵Linus Torvalds2018-11-031-1/+1
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 9p fix from Al Viro: "Regression fix for net/9p handling of iov_iter; broken by braino when switching to iov_iter_is_kvec() et.al., spotted and fixed by Marc" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: Fix 9p virtio breakage
| * | | | | | iov_iter: Fix 9p virtio breakageMarc Zyngier2018-11-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When switching to the new iovec accessors, a negation got subtly dropped, leading to 9p being remarkably broken (here with kvmtool): [ 7.430941] VFS: Mounted root (9p filesystem) on device 0:15. [ 7.432080] devtmpfs: mounted [ 7.432717] Freeing unused kernel memory: 1344K [ 7.433658] Run /virt/init as init process Warning: unable to translate guest address 0x7e00902ff000 to host Warning: unable to translate guest address 0x7e00902fefc0 to host Warning: unable to translate guest address 0x7e00902ff000 to host Warning: unable to translate guest address 0x7e008febef80 to host Warning: unable to translate guest address 0x7e008febf000 to host Warning: unable to translate guest address 0x7e008febef00 to host Warning: unable to translate guest address 0x7e008febf000 to host [ 7.436376] Kernel panic - not syncing: Requested init /virt/init failed (error -8). [ 7.437554] CPU: 29 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc8-02267-g00e23707442a #291 [ 7.439006] Hardware name: linux,dummy-virt (DT) [ 7.439902] Call trace: [ 7.440387] dump_backtrace+0x0/0x148 [ 7.441104] show_stack+0x14/0x20 [ 7.441768] dump_stack+0x90/0xb4 [ 7.442425] panic+0x120/0x27c [ 7.443036] kernel_init+0xa4/0x100 [ 7.443725] ret_from_fork+0x10/0x18 [ 7.444444] SMP: stopping secondary CPUs [ 7.445391] Kernel Offset: disabled [ 7.446169] CPU features: 0x0,23000438 [ 7.446974] Memory Limit: none [ 7.447645] ---[ end Kernel panic - not syncing: Requested init /virt/init failed (error -8). ]--- Restoring the missing "!" brings the guest back to life. Fixes: 00e23707442a ("iov_iter: Use accessor function") Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | | | | Merge branch 'work.afs' of ↵Linus Torvalds2018-11-0114-22/+22
|\| | | | | | | |_|_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
| * | | | | missing bits of "iov_iter: Separate type from direction and use accessor ↵Al Viro2018-11-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | functions" sunrpc patches from nfs tree conflict with calling conventions change done in iov_iter work. Trivial fixup... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | | | Merge tag 'nfs-for-4.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsAl Viro2018-11-0126-1590/+1921
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | backmerge to do fixup of iov_iter_kvec() conflict
| * | | | | | iov_iter: Separate type from direction and use accessor functionsDavid Howells2018-10-2411-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
| * | | | | | iov_iter: Use accessor functionDavid Howells2018-10-242-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use accessor functions to access an iterator's type and direction. This allows for the possibility of using some other method of determining the type of iterator than if-chains with bitwise-AND conditions. Signed-off-by: David Howells <dhowells@redhat.com>
* | | | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2018-11-017-26/+61
|\ \ \ \ \ \ \ | |_|_|_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) BPF verifier fixes from Daniel Borkmann. 2) HNS driver fixes from Huazhong Tan. 3) FDB only works for ethernet devices, reject attempts to install FDB rules for others. From Ido Schimmel. 4) Fix spectre V1 in vhost, from Jason Wang. 5) Don't pass on-stack object to irq_set_affinity_hint() in mvpp2 driver, from Marc Zyngier. 6) Fix mlx5e checksum handling when RXFCS is enabled, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits) openvswitch: Fix push/pop ethernet validation net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules bpf: test make sure to run unpriv test cases in test_verifier bpf: add various test cases to test_verifier bpf: don't set id on after map lookup with ptr_to_map_val return bpf: fix partial copy of map_ptr when dst is scalar libbpf: Fix compile error in libbpf_attach_type_by_name kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists selftests: mlxsw: qos_mc_aware: Add a test for UC awareness selftests: mlxsw: qos_mc_aware: Tweak for min shaper mlxsw: spectrum: Set minimum shaper on MC TCs mlxsw: reg: QEEC: Add minimum shaper fields net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset() net: hns3: bugfix for rtnl_lock's range in the hclge_reset() net: hns3: bugfix for handling mailbox while the command queue reinitialized net: hns3: fix incorrect return value/type of some functions net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read net: hns3: bugfix for is_valid_csq_clean_head() net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring() net: hns3: bugfix for the initialization of command queue's spin lock ...
| * | | | | | openvswitch: Fix push/pop ethernet validationJaime Caamaño Ruiz2018-10-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are both pop and push ethernet header actions among the actions to be applied to a packet, an unexpected EINVAL (Invalid argument) error is obtained. This is due to mac_proto not being reset correctly when those actions are validated. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html Fixes: 91820da6ae85 ("openvswitch: add Ethernet push and pop actions") Signed-off-by: Jaime Caamaño Ruiz <jcaamano@suse.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | Merge branch '10GbE' of ↵David S. Miller2018-10-311-1/+0
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-10-31 This series contains a various collection of fixes. Miroslav Lichvar from Red Hat or should I say IBM now? Updates the PHC timecounter interval for igb so that it gets updated at least once every 550 seconds. Ngai-Mint provides a fix for fm10k to prevent a soft lockup or system crash by adding a new condition to determine if the SM mailbox is in the correct state before proceeding. Jake provides several fm10k fixes, first one marks complier aborts as non-fatal since on some platforms trigger machine check errors when the compile aborts. Added missing device ids to the in-kernel driver. Due to the recent fixes, bumped the driver version. I (Jeff Kirsher) fixed a XFRM_ALGO dependency for both ixgbe and ixgbevf. This fix was based on the original work from Arnd Bergmann, which only fixed ixgbe. Mitch provides a fix for i40e/avf to update the status codes, which resolves an issue between a mis-match between i40e and the iavf driver, which also supports the ice LAN driver. Radoslaw fixes the ixgbe where the driver is logging a message about spoofed packets detected when the VF is re-started with a different MAC address. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | | ixgbe/ixgbevf: fix XFRM_ALGO dependencyJeff Kirsher2018-10-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the original work from Arnd Bergmann. When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a link error: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa': ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname' Simply selecting XFRM_ALGO from here causes circular dependencies, so to fix it, we probably want this slightly more complex solution that is similar to what other drivers with XFRM offload do: A separate Kconfig symbol now controls whether we include the IPsec offload code. To keep the old behavior, this is left as 'default y'. The dependency in XFRM_OFFLOAD still causes a circular dependency but is not actually needed because this symbol is not user visible, so removing that dependency on top makes it all work. CC: Arnd Bergmann <arnd@arndb.de> CC: Shannon Nelson <shannon.nelson@oracle.com> Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
| * | | | | | | bpf: tcp_bpf_recvmsg should return EAGAIN when nonblocking and no dataJohn Fastabend2018-10-301-0/+1
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We return 0 in the case of a nonblocking socket that has no data available. However, this is incorrect and may confuse applications. After this patch we do the correct thing and return the error EAGAIN. Quoting return codes from recvmsg manpage, EAGAIN or EWOULDBLOCK The socket is marked nonblocking and the receive operation would block, or a receive timeout had been set and the timeout expired before data was received. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * | | | | | rtnetlink: Disallow FDB configuration for non-Ethernet deviceIdo Schimmel2018-10-291-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an FDB entry is configured, the address is validated to have the length of an Ethernet address, but the device for which the address is configured can be of any type. The above can result in the use of uninitialized memory when the address is later compared against existing addresses since 'dev->addr_len' is used and it may be greater than ETH_ALEN, as with ip6tnl devices. Fix this by making sure that FDB entries are only configured for Ethernet devices. BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863 CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x14b/0x190 lib/dump_stack.c:113 kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956 __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645 memcmp+0x11d/0x180 lib/string.c:863 dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464 ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline] rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558 rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715 netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440ee9 Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0 R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181 kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2718 [inline] __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:996 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline] netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 v2: * Make error message more specific (David) Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_<op>") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 05:48:02 +0000