summaryrefslogtreecommitdiffstats
path: root/sound
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda - Add a fixup for Dell E7450Takashi Iwai2015-06-291-0/+1
| | | | | | | | Dell E7450 [0128:062e] needs the same quirk as other E7xx models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100571 Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix the dock headphone output on Fujitsu Lifebook E780Takashi Iwai2015-06-291-0/+6
| | | | | | | | | | | | | | Fujitsu Lifebook E780 sets the sequence number 0x0f to only only of the two headphones, thus the driver tries to assign another as the line-out, and this results in the inconsistent mapping between the created jack ctl and the actual I/O. Due to this, PulseAudio doesn't handle it properly and gets the silent output. The fix is to ignore the non-HP sequencer checks. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99681 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add headset support to Acer Aspire V5Takashi Iwai2015-06-271-0/+12
| | | | | | | | | | Acer Aspire V5 with ALC282 codec needs the similar quirk like Dell laptops to support the headset mic. The headset mic pin is 0x19 and it's not exposed by BIOS, thus we need to fix the pincfg as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - restore the MIC FIXUP for some Dell machinesHui Wang2015-06-261-1/+17
| | | | | | | | | | Those FIXUPs were applied to the machines through pin quirks, but recently the PCI_QUIRK makes them can't apply to the machines. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99851 Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: jack: Fix endless loop at unique index detectionTakashi Iwai2015-06-261-1/+4
| | | | | | | | | | | | | While the commit [d0a601c278de: ALSA: jack: Fix the id uniqueness check] fixes the wrong string check, it leads to a worse result -- the loop in get_available_index() goes into an endless loop. The cause is that snd_ctl_find_id() returns the object assigned to the numid if it's set. Thus it points to the previous entry again. This patch clears the numid field for the next call properly. Reported-and-tested-by: Tomáš Pružina <pruzinat@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - set proper caps for newer AMD hda audio in KB/KVAlex Deucher2015-06-251-0/+4
| | | | | | | | | Fixes audio problems on newer asics. Noticed by: Kelly Anderson <kelly@xilka.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Disable widget power-save for VIA codecsTakashi Iwai2015-06-251-3/+5
| | | | | | | | | | | | | | The widget power-save that was enabled in 4.1 kernel seems resulting in the silent output on VIA codecs by some reason. Some widgets get wrong power states. As a quick fix, turn this flag off while keeping power_down_unused flag. This will bring back to the state of 4.0.x. Fixes: 688b12cc3ca8 ('ALSA: hda - Use the new power control for VIA codecs') Reported-and-tested-by: Harald Dunkel <harri@afaics.de> Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix Dock Headphone on Thinkpad X250 seen as a Line OutDavid Henningsson2015-06-251-0/+7
| | | | | | | | | | | | Thinkpad X250, when attached to a dock, has two headphone outs but no line out. Make sure we don't try to turn this into one headphone and one line out (since that disables the headphone amp on the dock). Alsa-info at http://www.alsa-project.org/db/?f=36f8764e1d782397928feec715d0ef90dfddd4c1 Cc: stable@vger.kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pcm: Fix pcm_class sysfs outputTakashi Iwai2015-06-231-3/+3
| | | | | | | | | | The pcm_class sysfs of each PCM substream gives only "none" since the recent code change to embed the struct device. Fix the code to point directly to the embedded device object properly. Fixes: ef46c7af93f9 ('ALSA: pcm: Embed struct device') Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v4.2-3' of ↵Takashi Iwai2015-06-228-50/+48
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: A couple more updates for v4.2 These were sitting on my laptop.
| * Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown2015-06-221-2/+0
| |\
| | * ASoC: rsrc-card: remove unused retKuninori Morimoto2015-06-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | '047000278da3a17f8("ASoC: rsrc-card: cleanup for DPCM")' cleanuped rsrc-card driver, but then, unused ret was left. Below warning happen without this patch ${LINUX}/sound/soc/sh/rcar/rsrc-card.c: In function 'rsrc_card_startup': ${LINUX}/sound/soc/sh/rcar/rsrc-card.c:78:6: warning: unused variable \ 'ret' [-Wunused-variable] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | Merge remote-tracking branch 'asoc/topic/arizona' into asoc-nextMark Brown2015-06-227-48/+48
| |\ \
| | * | ASoC: wm_adsp: Move DSP Rate controls into the codecRichard Fitzgerald2015-06-197-48/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rate controls are codec-specific, it's not possible to generically say what the range or the meaning of each control is (or even if they exist at all) - that depends on the particular codec. This is currently being handled for Arizona codecs by putting an Arizona-specific table of controls inside the wm_adsp driver. This creates a dependency between wm_adsp and arizona.c, and is an awkward solution if the ADSP is used in another family of codecs Fix this by moving the Arizona-specific rate controls into the Arizona codec drivers. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge branches 'topic/adsp' and 'topic/dapm' of ↵Mark Brown2015-06-19109-470/+572
| | |\ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
* | | | | Merge tag 'asoc-v4.2-2' of ↵Takashi Iwai2015-06-2253-889/+3501
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Further updates for v4.2 There's a bunch of additional updates and fixes that came in since my orignal pull request here, including DT support for rt5645 and fairly large serieses of cleanups and improvements to tas2552 and rcar.
| * | | | Merge remote-tracking branch 'asoc/topic/wm8995' into asoc-nextMark Brown2015-06-221-1/+1
| |\ \ \ \
| | * | | | ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 caseAxel Lin2015-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix trivial typo. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | |
| | \ \ \ \
| *-. \ \ \ \ Merge remote-tracking branches 'asoc/topic/wm8523' and 'asoc/topic/wm8741' ↵Mark Brown2015-06-222-35/+52
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | into asoc-next
| | | * | | | | ASoC: wm8741: Allow master clock switchingSergej Sawazki2015-06-081-35/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The set of supported sample rates depends on the master clock supplied to the codec. Allow the machine driver to set the required master clock in hw_params(). Signed-off-by: Sergej Sawazki <ce3a@gmx.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: wm8523: Set bclk ratio for master modeJulian Scheel2015-06-121-0/+26
| | | |/ / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running in master mode the bclk divider must be configured to generate a sane bitclock. Pick the smallest fs multiplicator, which can hold all transmitted bits. Signed-off-by: Julian Scheel <julian@jusst.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | | Merge remote-tracking branch 'asoc/topic/tas2552' into asoc-nextMark Brown2015-06-222-91/+152
| |\ \ \ \ \ \
| | * | | | | | ASoC: tas2552: Use devm_gpiod_get_optional for enable-gpioAxel Lin2015-06-111-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ea178d1456dc ("ASoC: tas2552: Make the enable-gpio really optional") makes enable-gpio optional. devm_gpiod_get_optional() is the better function for optional gpio, so let's switch to use it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Use consistent name for 'struct tas2552_data'Peter Ujfalusi2015-06-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In tas2552_sw_shutdown() tas_data is used while the rest of the driver uses tas2552 when dealing with the 'struct tas2552_data' Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Remove unneeded semicolonPeter Ujfalusi2015-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Double semicolon was added by the following commit: ea178d1456dc ASoC: tas2552: Make the enable-gpio really optional Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Call pm_runtime_disable when the module is removedPeter Ujfalusi2015-06-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The module can not be loaded again after it has been removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Code, define alignment changes for uniformityPeter Ujfalusi2015-06-082-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Align the numbers in the header file to the same column. At the same time change the wrapping of CFG_2 register write in the probe function to be uniform with the other calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Correct Boost Auto-Pass Through Control register usagePeter Ujfalusi2015-06-082-14/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct the bit definition so the code will change the bits what it supposed to change. Also rename the register define to TAS2552_BOOST_APT_CTRL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Correct Output Data register usagePeter Ujfalusi2015-06-082-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not write to DOUT Tristate register at probe time, specially not write data which is defined to be used in Output Data Register. Fix the defines for the Output Data Register and correct the register write at probe time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Add control for selecting DIN sourcePeter Ujfalusi2015-06-081-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'DIN source' enum can be used to select the DIN Source (muted, left, right or average of left and right channels). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: tas2552: Correct the PLL configurationPeter Ujfalusi2015-06-082-54/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not restrict the sampling rate to 44.1/48KHz. The pll_clk clock should be (sampling rate * 512) in all cases. Correct the J.D calculation (the D part was incorrectly calculated). Restore PLL enable status after we are done with the configuration. Implement hardware constraint handling towards the pll_clkin: if D != 0 (in J.D) then 1.1MHz <= pll_clkin <= 9.2MHz needs to be checked. If the PLL setup does not met with this constraint, fall back to BCLK as reference clock, if BCLK fails, use the internal 1.8MHz clock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | | | Merge remote-tracking branch 'asoc/topic/simple' into asoc-nextMark Brown2015-06-221-3/+15
| |\ \ \ \ \ \ \
| | * | | | | | | ASoC: simple card: Add mclk-fs property in dai-linkArnaud Pouliquen2015-06-121-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add mclk-fs ratio property per dai-link sub node. This will allow to manage several codecs with different ratio. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | | | |
| | \ \ \ \ \ \ \
| | \ \ \ \ \ \ \
| | \ \ \ \ \ \ \
| | \ \ \ \ \ \ \
| | \ \ \ \ \ \ \
| *-----. \ \ \ \ \ \ \ Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', ↵Mark Brown2015-06-2217-575/+950
| |\ \ \ \ \ \ \ \ \ \ \ | | | | |_|_|_|_|_|_|_|/ | | | |/| | | | | | | | | | | | | | | | | | | | 'asoc/topic/rt286' and 'asoc/topic/rt5640' into asoc-next
| | | | | * | | | | | | ASoC: rt5640: Constify ACPI device ids and register defaultsMathias Krause2015-06-151-3/+2
| | | | | | |_|/ / / / | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Also drop the unneeded RT5640_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * / | | | | | ASoC: rt286: Add RL6347A class device shared support for RT286Oder Chiou2015-06-125-91/+173
| | | | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch separates the IO function from the rt286. It is prepared to share for new chips that support the same IO function. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: remove io from rsnd_modKuninori Morimoto2015-06-162-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many path if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. rsnd_mod_to_io() is no longer needed. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()Kuninori Morimoto2015-06-165-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch checks module working status via io instead of mod Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrolKuninori Morimoto2015-06-164-23/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from snd_kcontrol and related function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()Kuninori Morimoto2015-06-161-25/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from rsnd_src_xxx() and related function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()Kuninori Morimoto2015-06-163-16/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from rsnd_ssi_xxx() and related function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()Kuninori Morimoto2015-06-166-71/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from rsnd_dma_xxx() and related function Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()Kuninori Morimoto2015-06-165-20/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from rsnd_get_adinr() and its related function Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: add common interrupt handler for SSI/SRC/DMAKuninori Morimoto2015-06-162-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. Then, interrupt handler can't use rsnd_mod_to_io(). This patch adds SSI/SRC/DMA common interrupt handler frame Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: adds struct rsnd_dai_stream as on each fuction as parameterKuninori Morimoto2015-06-165-15/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This means we can't call rsnd_mod_to_io() any more. This patch adds struct rsnd_dai_stream to each function as parameter. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: rsnd_mod has rsnd_privKuninori Morimoto2015-06-165-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This means we can't use rsnd_mod_to_io() in SSI/SRC/DMA interrupt handler. In such case, we need to check all io in interrupt handler, and then, "priv" is needed. This patch adds rsnd_priv pointer in rsnd_mod for prepare it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsnd: count each mod (SSI/SRC/DVC)Kuninori Morimoto2015-06-162-21/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. Then, we don't need to re-call each mod function that had been called. This patch count each mod status. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsrc-card: cleanup for DPCMKuninori Morimoto2015-06-161-189/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rsrc-card driver is based on simple-card driver which is caring about CPU / Codec connection. OTOH, rsrc-card is used for DPCM system. FE portion is constituted by CPU and dummy Codec, and BE is constituted by dummy CPU and Codec in DPCM system. Because of this, current rsrc-card is doing pointless method. It works well if FE/BE was 1:1, but not good for multi FE/BE. This patch cleanups rsrc-card driver for DPCM. and this is prepare for MIX support for Renesas sound driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsrc-card: tidyup return value of clock errorKuninori Morimoto2015-06-161-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | ASoC: rsrc-card: move rsrc_card_parse_daifmt() to upper sideKuninori Morimoto2015-06-161-35/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is prepare for DPCM cleanup Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-31 08:00:58 +0000