summaryrefslogtreecommitdiffstats
path: root/tools/usb
Commit message (Collapse)AuthorAgeFilesLines
* testusb: Fix warning comparing pointer to 0Haowen Bai2022-04-261-1/+1
| | | | | | | | Avoid pointer type value compared with 0 to make code clear. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1648088171-30912-1-git-send-email-baihaowen@meizu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* kbuild: replace $(if A,A,B) with $(or A,B)Masahiro Yamada2022-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | $(or ...) is available since GNU Make 3.81, and useful to shorten the code in some places. Covert as follows: $(if A,A,B) --> $(or A,B) This patch also converts: $(if A, A, B) --> $(or A, B) Strictly speaking, the latter is not an equivalent conversion because GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B) expands to " A", while $(or A, B) expands to "A". Anyway, preceding spaces are not significant in the code hunks I touched. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
* usb: testusb: Fix for showing the connection speedFaizel K B2021-09-141-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | testusb' application which uses 'usbtest' driver reports 'unknown speed' from the function 'find_testdev'. The variable 'entry->speed' was not updated from the application. The IOCTL mentioned in the FIXME comment can only report whether the connection is low speed or not. Speed is read using the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The call is implemented in the function 'handle_testdev' where the file descriptor was availble locally. Sample output is given below where 'high speed' is printed as the connected speed. sudo ./testusb -a high speed /dev/bus/usb/001/011 0 /dev/bus/usb/001/011 test 0, 0.000015 secs /dev/bus/usb/001/011 test 1, 0.194208 secs /dev/bus/usb/001/011 test 2, 0.077289 secs /dev/bus/usb/001/011 test 3, 0.170604 secs /dev/bus/usb/001/011 test 4, 0.108335 secs /dev/bus/usb/001/011 test 5, 2.788076 secs /dev/bus/usb/001/011 test 6, 2.594610 secs /dev/bus/usb/001/011 test 7, 2.905459 secs /dev/bus/usb/001/011 test 8, 2.795193 secs /dev/bus/usb/001/011 test 9, 8.372651 secs /dev/bus/usb/001/011 test 10, 6.919731 secs /dev/bus/usb/001/011 test 11, 16.372687 secs /dev/bus/usb/001/011 test 12, 16.375233 secs /dev/bus/usb/001/011 test 13, 2.977457 secs /dev/bus/usb/001/011 test 14 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 17, 0.148826 secs /dev/bus/usb/001/011 test 18, 0.068718 secs /dev/bus/usb/001/011 test 19, 0.125992 secs /dev/bus/usb/001/011 test 20, 0.127477 secs /dev/bus/usb/001/011 test 21 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 24, 4.133763 secs /dev/bus/usb/001/011 test 27, 2.140066 secs /dev/bus/usb/001/011 test 28, 2.120713 secs /dev/bus/usb/001/011 test 29, 0.507762 secs Signed-off-by: Faizel K B <faizel.kb@dicortech.com> Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: remove editor modelines and cruftMasahiro Yamada2021-05-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | The section "19) Editor modelines and other cruft" in Documentation/process/coding-style.rst clearly says, "Do not include any of these in source files." I recently receive a patch to explicitly add a new one. Let's do treewide cleanups, otherwise some people follow the existing code and attempt to upstream their favoriate editor setups. It is even nicer if scripts/checkpatch.pl can check it. If we like to impose coding style in an editor-independent manner, I think editorconfig (patch [1]) is a saner solution. [1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/ Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usbip: tools: add usage of device mode in usbip_list.cHongren Zheng (Zenithal)2021-03-261-1/+2
| | | | | | | | | | The option '-d/--device' was implemented in 'usbip list' but not shown in usage. Hence this commit adds this option to usage. Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hongren Zheng <i@zenithal.me> Link: https://lore.kernel.org/r/YFrwq75Uyef3c9gz@Sun Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: add options and examples in man page related to device modeHongren Zheng (Zenithal)2021-03-262-1/+67
| | | | | | | | | | | | | | The commit e0546fd8b748 ("usbip: tools: Start using VUDC backend in usbip tools") implemented device mode for user space tools, however the corresponding options are not documented in man page. This commit documents the options and provides examples on device mode. Also the command `usbip port` is documented. Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hongren Zheng <i@zenithal.me> Link: https://lore.kernel.org/r/YFrdyKKx1nx8bktm@Sun Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: usbip: list.h: fix kernel-doc for list_del()Randy Dunlap2021-03-261-5/+5
| | | | | | | | | | | | | | | | | | | In list.h, the kernel-doc for list_del() should be immediately preceding the implementation and not separated from it by another function implementation. Eliminates this kernel-doc error: list.h:1: warning: 'list_del' not found Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210325174724.14447-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: usb: move to tools buildsystemHeikki Krogerus2020-08-192-8/+47
| | | | | | | | | | Converting the Makefile to use the new tools buildsystem. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [fixes builds with O=...] Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200819071733.60028-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: usb: usbip: Replace HTTP links with HTTPS onesAlexander A. Klimov2020-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200711123906.16325-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: add in man page how to load the client's moduleAntonio Borneo2020-06-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | While the man page usbipd.8 already informs the user on which kernel module has to be used on server side, the man page usbip.8 does not provide any equivalent information on client side. Also, it could be hard for a newbie to identify the proper usbip client kernel module, due to the name "vhci-hcd" that has no immediate assonance with usbip. Add in usbip.8 the command to add the module vhci-hcd, similarly as it's already present in usbipd.8 for usbip-host. While there, rephrase the description of the command "usbip list --remote=server". Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> -- v1->v2: rephrase the description of command "usbip list ..." fix a typo in commit message Link: https://lore.kernel.org/r/2da8fc9e34440c1fa5f9007baaa3921767cdec50.1593090874.git.borneo.antonio@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: fix module name in man pageAntonio Borneo2020-06-241-1/+1
| | | | | | | | | | | | | | | Commit 64e62426f40d ("staging: usbip: edit Kconfig and rename CONFIG options") renamed the module usbip as usbip-host, but the example in the man page still reports the old module name. Fix the module name in usbipd.8 Fixes: 64e62426f40d ("staging: usbip: edit Kconfig and rename CONFIG options") Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Acked-by: matt mooney <mfm@muteddisk.com> Link: https://lore.kernel.org/r/20200618000818.1048203-1-borneo.antonio@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: fix build error for multiple definitionAntonio Borneo2020-06-241-1/+1
| | | | | | | | | | | | | | With GCC 10, building usbip triggers error for multiple definition of 'udev_context', in: - libsrc/vhci_driver.c:18 and - libsrc/usbip_host_common.c:27. Declare as extern the definition in libsrc/usbip_host_common.c. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200618000844.1048309-1-borneo.antonio@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* .gitignore: add SPDX License IdentifierMasahiro Yamada2020-03-252-0/+2
| | | | | | | Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: Fix unsafe unaligned pointer usageShuah Khan2020-01-092-25/+27
| | | | | | | | | | | | | | | Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool build fails with new gcc -Werror=address-of-packed-member checks. usbip_network.c: In function ‘usbip_net_pack_usb_device’: usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 79 | usbip_net_pack_uint32_t(pack, &udev->busnum); Fix with minor changes to pass by value instead of by address. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: usb: usbip: Get rid of driver name printout in READMEMagnus Damm2020-01-061-11/+11
| | | | | | | | | | Driver name is no longer printed out so update the README examples to avoid confusion. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/157677692518.684.15385402529285904844.sendpatchset@octo Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: fix fd leakage in the function of read_attr_usbip_statusHewenliang2019-11-071-1/+1
| | | | | | | | | | We should close the fd before the return of read_attr_usbip_status. Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend") Signed-off-by: Hewenliang <hewenliang4@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191025043515.20053-1-hewenliang4@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: Fix read_usb_vudc_device() error path handlingGwanYeong Kim2019-10-281-2/+4
| | | | | | | | | | | This isn't really accurate right. fread() doesn't always return 0 in error. It could return < number of elements and set errno. Signed-off-by: GwanYeong Kim <gy741.kim@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191018032223.4644-1-gy741.kim@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: fix GCC8 warning for strncpyLiu, Changcheng2019-07-252-4/+8
| | | | | | | | | | | | GCC8 started emitting warning about using strncpy with number of bytes exactly equal destination size which could lead to non-zero terminated string being copied. Use "SYSFS_PATH_MAX - 1" & "SYSFS_BUS_ID_SIZE - 1" as number of bytes to ensure name is always zero-terminated. Signed-off-by: Changcheng Liu <changcheng.liu@aliyun.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20190725132209.GA27590@jerryopenix Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner2019-05-301-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner2019-05-301-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner2019-05-243-49/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner2019-05-2117-221/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: fix atoi() on non-null terminated stringColin Ian King2018-10-181-3/+3
| | | | | | | | | | | | | | | | Currently the call to atoi is being passed a single char string that is not null terminated, so there is a potential read overrun along the stack when parsing for an integer value. Fix this by instead using a 2 char string that is initialized to all zeros to ensure that a 1 char read into the string is always terminated with a \0. Detected by cppcheck: "Invalid atoi() argument nr 1. A nul-terminated string is required." Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: fix vhci_hcd controller countingMaciej Żenczykowski2018-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this usbip fails on a machine with devices that lexicographically come after vhci_hcd. ie. $ ls -l /sys/devices/platform ... drwxr-xr-x. 4 root root 0 Sep 19 16:21 serial8250 -rw-r--r--. 1 root root 4096 Sep 19 23:50 uevent drwxr-xr-x. 6 root root 0 Sep 20 13:15 vhci_hcd.0 drwxr-xr-x. 4 root root 0 Sep 19 16:22 w83627hf.656 Because it detects 'w83627hf.656' as another vhci_hcd controller, and then fails to be able to talk to it. Note: this doesn't actually fix usbip's support for multiple controllers... that's still broken for other reasons ("vhci_hcd.0" is hardcoded in a string macro), but is enough to actually make it work on the above machine. See also: https://bugzilla.redhat.com/show_bug.cgi?id=1631148 Cc: Jonathan Dieter <jdieter@gmail.com> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com> Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Tested-by: Jonathan Dieter <jdieter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: usb: ffs-test: Fix build on big endian systemsPeter Senna Tschudin2018-07-171-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C library htole16/32 function calls. However, cpu_to_le16/32 are used when initializing structures, i.e in a context where a function call is not allowed. It works fine on little endian systems because htole16/32 are defined by the C library as no-ops. But on big-endian systems, they are actually doing something, which might involve calling a function, causing build failures, such as: ffs-test.c:48:25: error: initializer element is not constant #define cpu_to_le32(x) htole32(x) ^~~~~~~ ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’ .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2), ^~~~~~~~~~~ To solve this, we code cpu_to_le16/32 in a way that allows them to be used when initializing structures. This fix was imported from meta-openembedded/android-tools/fix-big-endian-build.patch written by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usbip: usbip_detach: fix to check for invalid portsShuah Khan (Samsung OSG)2018-05-311-9/+30
| | | | | | | | | | | | | | | usbip detach doesn't check for invalid ports and ports that are already detached. It attempts to remove state file(s) without validating the port and sends detach request to the driver for ports that are already detached. Add check for invalid ports (port > maxports) and ports that are already detached (status == VDEV_ST_NULL). Don't remove state files and don't send detach request for invalid ports and ports that are already detached. Add error and information messages that make sense. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: usbip_detach: Fix memory, udev context and udev leakShuah Khan (Samsung OSG)2018-05-311-3/+6
| | | | | | | | | | detach_port() fails to call usbip_vhci_driver_close() from its error path after usbip_vhci_detach_device() returns failure, leaking memory allocated in usbip_vhci_driver_open() and holding udev_context and udev references. Fix it to call usbip_vhci_driver_close(). Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: dynamically allocate idev by nports found in sysfsMichael Grzeschik2018-05-312-15/+20
| | | | | | | | | | | As the amount of available ports varies by the kernels build configuration. To remove the limitation of the fixed 128 ports we allocate the amount of idevs by using the number we get from the kernel. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: usbipd: exclude exported devices from exportable device listShuah Khan2018-03-221-1/+15
| | | | | | | | | | | usbipd includes exported devices in response to exportable device list. Exclude exported devices from exportable device list to avoid: - import requests for devices that are exported only to fail the request. - revealing devices that are imported by a client to another client. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: change to use new error codes in server reply messagesShuah Khan2018-03-095-19/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | Changed usbip_network, usbip_attach, usbip_list, and usbipd to use and propagate the new error codes in server reply messages. usbip_net_recv_op_common() is changed to take a pointer to status return the status returned in the op_common.status to callers. usbip_attach and usbip_list use the common interface to print error messages to indicate why the request failed. With this change the messages say why a request failed: - when a client requests a device that is already exported: usbip attach -r server_name -b 3-10.2 usbip: error: Attach Request for 3-10.2 failed - Device busy (exported) - when a client requests a device that isn't exportable, usbip attach -r server_name -b 3-10.4 usbip: error: Attach Request for 3-10.4 failed - Device not found Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: usbip_host_common: Use new error codes to return request statusShuah Khan2018-03-091-1/+4
| | | | | | | | | | Currently ST_OK and ST_NA are the only values used to communicate status of a request from a client. Use new error codes to clearly indicate what failed. For example, when client sends request to import a device that isn't export-able, send ST_DEV_BUSY to the client. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools: add more error codes for usbip request/reply messagesShuah Khan2018-03-093-3/+35
| | | | | | | | | | | | | | | Currently ST_OK and ST_NA are the only values defined to communicate status of a request from a client. Add more error codes to clearly indicate what failed. For example, when client sends request to import a device that isn't export-able, server can send a specific error code to the client. Existing defines are moved to a common header in libsrc to be included in the libusbip_la-usbip_common.o to be used by all the usbip tools. Supporting interface to print error strings is added to the common lib. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools usbip_network: Fix cryptic error messagesShuah Khan2018-03-091-2/+2
| | | | | | | | Kernel and tool version mismatch message is cryptic. Fix it to be informative. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: tools usbip_attach: Fix cryptic error messagesShuah Khan2018-03-091-1/+2
| | | | | | | | | Attach device error message is cryptic and useless. Fix it to be informative. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: fix cross-compile var clobberingMartin Kelly2018-02-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usbip: list: don't list devices attached to vhci_hcdShuah Khan2018-01-221-0/+9
| | | | | | | | | | | | | | | | usbip host lists devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Fix it to check and not list devices that are attached to vhci_hcd. Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: prevent bind loops on devices attached to vhci_hcdShuah Khan2018-01-221-0/+9
| | | | | | | | | | | | | | | | | | | | usbip host binds to devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Unbind followed by bind works, however device is left in a bad state with accesses via the attached busid result in errors and system hangs during shutdown. Fix it to check and bail out if the device is already attached to vhci_hcd. Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: usb: usbip: fix fd leak in case of 'fread' failureElad Wexler2018-01-041-1/+4
| | | | | | | | Fix possible resource leak: fd Signed-off-by: Elad Wexler <elad.wexler@gmail.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: usb: usbip_device_driver: prefer 'unsigned int' to 'unsigned'Elad Wexler2018-01-041-1/+1
| | | | | | | | Fixup a coding style issue Signed-off-by: Elad Wexler <elad.wexler@gmail.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 4.15.0-rc6 into usb-nextGreg Kroah-Hartman2018-01-021-3/+6
|\ | | | | | | | | | | | | We want the USB fixes in here, and this resolves a merge issue with the vhci_rx.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbip: fix usbip bind writing random string after command in match_busidJuan Zea2017-12-191-3/+6
| | | | | | | | | | | | | | | | | | | | | | usbip bind writes commands followed by random string when writing to match_busid attribute in sysfs, caused by using full variable size instead of string length. Signed-off-by: Juan Zea <juan.zea@qindel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 4.15-rc4 into usb-nextGreg Kroah-Hartman2017-12-181-8/+16
|\| | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbip: prevent vhci_hcd driver from leaking a socket pointer addressShuah Khan2017-12-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent ↵Julien BOIBESSOT2017-12-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gcc with -Werror) Fixes following build error: vhci_driver.c: In function 'refresh_imported_device_list': vhci_driver.c:118:37: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=] snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~ vhci_driver.c:118:4: note: 'snprintf' output between 9 and 18 bytes into a destination of size 17 snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbip: fix usbip attach to find a port that matches the requested speedShuah Khan2017-11-301-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | usbip attach fails to find a free port when the device on the first port is a USB_SPEED_SUPER device and non-super speed device is being attached. It keeps checking the first port and returns without a match getting stuck in a loop. Fix it check to find the first port with matching speed. Reported-by: Juan Zea <juan.zea@qindel.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tools/usbip: fixes build with musl libc toolchainJulien BOIBESSOT2017-12-071-1/+1
|/ | | | | | | | | | | | | | | | | | | | | Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD. SIGCHLD is the new POSIX name for that signal so it doesn't change anything on other libcs. This fixes this kind of build error: usbipd.c: In function ‘set_signal’: usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function) sigaction(SIGCLD, &act, NULL); ^~~~~~ usbipd.c:459:12: note: each undeclared identifier is reported only once for each function it appears in Makefile:407: recipe for target 'usbipd.o' failed make[3]: *** [usbipd.o] Error 1 Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds2017-11-131-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
| * usbip: tools: Install all headers needed for libusbip developmentBen Hutchings2017-10-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | usbip_host_driver.h now depends on several additional headers, which need to be installed along with it. Fixes: 021aed845303 ("staging: usbip: userspace: migrate usbip_host_driver ...") Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-0215-0/+15
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 18:34:12 +0000