From 0a3c1d45eca09ca2fc4b84b6c42ebec7ff938df0 Mon Sep 17 00:00:00 2001 From: Kiran K Date: Thu, 19 Nov 2020 17:09:40 +0530 Subject: Bluetooth: btusb: Add *setup* function for new generation Intel controllers Define a new *setup* function for new generation Intel controllers Signed-off-by: Kiran K Signed-off-by: Amit K Bag Signed-off-by: Raghuram Hegde Reviewed-by: Sathish Narasimman Reviewed-by: Chethan T N Reviewed-by: Srivatsa Ravishankar Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/btusb.c | 141 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3bbe8f43e7fa..4fee7e1c8521 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -60,6 +60,7 @@ static struct usb_driver btusb_driver; #define BTUSB_WIDEBAND_SPEECH 0x400000 #define BTUSB_VALID_LE_STATES 0x800000 #define BTUSB_QCA_WCN6855 0x1000000 +#define BTUSB_INTEL_NEWGEN 0x2000000 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -2718,6 +2719,128 @@ finish: return 0; } +static int btusb_setup_intel_newgen(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + u32 boot_param; + char ddcname[64]; + ktime_t calltime, delta, rettime; + unsigned long long duration; + int err; + struct intel_debug_features features; + struct intel_version_tlv version; + + bt_dev_dbg(hdev, ""); + + /* Set the default boot parameter to 0x0 and it is updated to + * SKU specific boot parameter after reading Intel_Write_Boot_Params + * command while downloading the firmware. + */ + boot_param = 0x00000000; + + calltime = ktime_get(); + + /* Read the Intel version information to determine if the device + * is in bootloader mode or if it already has operational firmware + * loaded. + */ + err = btintel_read_version_tlv(hdev, &version); + if (err) { + bt_dev_err(hdev, "Intel Read version failed (%d)", err); + btintel_reset_to_bootloader(hdev); + return err; + } + + btintel_version_info_tlv(hdev, &version); + + /* check if controller is already having an operational firmware */ + if (version.img_type == 0x03) + goto finish; + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long)ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration); + + calltime = ktime_get(); + + set_bit(BTUSB_BOOTING, &data->flags); + + err = btintel_send_intel_reset(hdev, boot_param); + if (err) { + bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err); + btintel_reset_to_bootloader(hdev); + return err; + } + + /* The bootloader will not indicate when the device is ready. This + * is done by the operational firmware sending bootup notification. + * + * Booting into operational firmware should not take longer than + * 1 second. However if that happens, then just fail the setup + * since something went wrong. + */ + bt_dev_info(hdev, "Waiting for device to boot"); + + err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(1000)); + + if (err == -EINTR) { + bt_dev_err(hdev, "Device boot interrupted"); + return -EINTR; + } + + if (err) { + bt_dev_err(hdev, "Device boot timeout"); + btintel_reset_to_bootloader(hdev); + return -ETIMEDOUT; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long)ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Device booted in %llu usecs", duration); + + clear_bit(BTUSB_BOOTLOADER, &data->flags); + + /* Once the device is running in operational mode, it needs to + * apply the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it + * fails to load the file, no need to fail the setup. + */ + btintel_load_ddc_config(hdev, ddcname); + + /* Read the Intel supported features and if new exception formats + * supported, need to load the additional DDC config to enable. + */ + btintel_read_debug_features(hdev, &features); + + /* Set DDC mask for available debug features */ + btintel_set_debug_features(hdev, &features); + + /* Read the Intel version information after loading the FW */ + err = btintel_read_version_tlv(hdev, &version); + if (err) + return err; + + btintel_version_info_tlv(hdev, &version); + +finish: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. It + * does not enable any debugging related events. + * + * The device will function correctly without these events enabled + * and thus no need to fail the setup. + */ + btintel_set_event_mask(hdev, false); + + return 0; +} static int btusb_shutdown_intel(struct hci_dev *hdev) { struct sk_buff *skb; @@ -4103,6 +4226,24 @@ static int btusb_probe(struct usb_interface *intf, set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); } + if (id->driver_info & BTUSB_INTEL_NEWGEN) { + hdev->manufacturer = 2; + hdev->send = btusb_send_frame_intel; + hdev->setup = btusb_setup_intel_newgen; + hdev->shutdown = btusb_shutdown_intel_new; + hdev->hw_error = btintel_hw_error; + hdev->set_diag = btintel_set_diag; + hdev->set_bdaddr = btintel_set_bdaddr; + hdev->cmd_timeout = btusb_intel_cmd_timeout; + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); + + data->recv_event = btusb_recv_event_intel; + data->recv_bulk = btusb_recv_bulk_intel; + set_bit(BTUSB_BOOTLOADER, &data->flags); + } + if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; -- cgit v1.2.3