From 7143dfac692cd25d48a24dbe8323bc17af95b4ec Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Fri, 28 Dec 2012 16:07:16 +0800 Subject: ah4/esp4: set transport header correctly for IPsec tunnel mode. IPsec tunnel does not set ECN field to CE in inner header when the ECN field in the outer header is CE, and the ECN field in the inner header is ECT(0) or ECT(1). The cause is ipip_hdr() does not return the correct address of inner header since skb->transport-header is not the inner header after esp_input_done2(), or ah_input(). Signed-off-by: Li RongQing Signed-off-by: Steffen Klassert --- net/ipv4/ah4.c | 11 +++++++++-- net/ipv4/esp4.c | 5 ++++- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index a0d8392491c3..a154d0a08c79 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -269,7 +269,11 @@ static void ah_input_done(struct crypto_async_request *base, int err) skb->network_header += ah_hlen; memcpy(skb_network_header(skb), work_iph, ihl); __skb_pull(skb, ah_hlen + ihl); - skb_set_transport_header(skb, -ihl); + + if (x->props.mode == XFRM_MODE_TUNNEL) + skb_reset_transport_header(skb); + else + skb_set_transport_header(skb, -ihl); out: kfree(AH_SKB_CB(skb)->tmp); xfrm_input_resume(skb, err); @@ -381,7 +385,10 @@ static int ah_input(struct xfrm_state *x, struct sk_buff *skb) skb->network_header += ah_hlen; memcpy(skb_network_header(skb), work_iph, ihl); __skb_pull(skb, ah_hlen + ihl); - skb_set_transport_header(skb, -ihl); + if (x->props.mode == XFRM_MODE_TUNNEL) + skb_reset_transport_header(skb); + else + skb_set_transport_header(skb, -ihl); err = nexthdr; diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index b61e9deb7c7e..fd26ff4f3eac 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -346,7 +346,10 @@ static int esp_input_done2(struct sk_buff *skb, int err) pskb_trim(skb, skb->len - alen - padlen - 2); __skb_pull(skb, hlen); - skb_set_transport_header(skb, -ihl); + if (x->props.mode == XFRM_MODE_TUNNEL) + skb_reset_transport_header(skb); + else + skb_set_transport_header(skb, -ihl); err = nexthdr[1]; -- cgit v1.2.3 From a9403f8aeb3e7dba6988d6cbe436e6521894e427 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Tue, 8 Jan 2013 15:41:12 +0800 Subject: ah6/esp6: set transport header correctly for IPsec tunnel mode. IPsec tunnel does not set ECN field to CE in inner header when the ECN field in the outer header is CE, and the ECN field in the inner header is ECT(0) or ECT(1). The cause is ipip6_hdr() does not return the correct address of inner header since skb->transport-header is not the inner header after esp6_input_done2(), or ah6_input(). Signed-off-by: Li RongQing Signed-off-by: Steffen Klassert --- net/ipv6/ah6.c | 11 +++++++++-- net/ipv6/esp6.c | 5 ++++- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c index ecc35b93314b..384233188ac1 100644 --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -472,7 +472,10 @@ static void ah6_input_done(struct crypto_async_request *base, int err) skb->network_header += ah_hlen; memcpy(skb_network_header(skb), work_iph, hdr_len); __skb_pull(skb, ah_hlen + hdr_len); - skb_set_transport_header(skb, -hdr_len); + if (x->props.mode == XFRM_MODE_TUNNEL) + skb_reset_transport_header(skb); + else + skb_set_transport_header(skb, -hdr_len); out: kfree(AH_SKB_CB(skb)->tmp); xfrm_input_resume(skb, err); @@ -593,9 +596,13 @@ static int ah6_input(struct xfrm_state *x, struct sk_buff *skb) skb->network_header += ah_hlen; memcpy(skb_network_header(skb), work_iph, hdr_len); - skb->transport_header = skb->network_header; __skb_pull(skb, ah_hlen + hdr_len); + if (x->props.mode == XFRM_MODE_TUNNEL) + skb_reset_transport_header(skb); + else + skb_set_transport_header(skb, -hdr_len); + err = nexthdr; out_free: diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 282f3723ee19..40ffd72243a4 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -300,7 +300,10 @@ static int esp_input_done2(struct sk_buff *skb, int err) pskb_trim(skb, skb->len - alen - padlen - 2); __skb_pull(skb, hlen); - skb_set_transport_header(skb, -hdr_len); + if (x->props.mode == XFRM_MODE_TUNNEL) + skb_reset_transport_header(skb); + else + skb_set_transport_header(skb, -hdr_len); err = nexthdr[1]; -- cgit v1.2.3 From dbccd791a3fbbdac12c33834b73beff3984988e9 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Tue, 11 Dec 2012 08:51:19 +0100 Subject: Bluetooth: Fix sending HCI commands after reset After sending reset command wait for its command complete event before sending next command. Some chips sends CC event for command received before reset if reset was send before chip replied with CC. This is also required by specification that host shall not send additional HCI commands before receiving CC for reset. < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.405850 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.407864 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 18.408835 Signed-off-by: Szymon Janc Cc: stable@vger.kernel.org Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 705078a0cc39..81b44481d0d9 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2688,7 +2688,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) if (ev->opcode != HCI_OP_NOP) del_timer(&hdev->cmd_timer); - if (ev->ncmd) { + if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) { atomic_set(&hdev->cmd_cnt, 1); if (!skb_queue_empty(&hdev->cmd_q)) queue_work(hdev->workqueue, &hdev->cmd_work); -- cgit v1.2.3 From eed307e290b96636def331375e065aca43f9069a Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Tue, 11 Dec 2012 11:41:20 +0800 Subject: Bluetooth: Add support for IMC Networks [13d3:3393] Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3393 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index b00000e8aef6..3418bf988d01 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -81,6 +81,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, + { USB_DEVICE(0x13d3, 0x3393) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -108,6 +109,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a1d4ede5b892..acd5be40fc04 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -139,6 +139,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 2c262b2a5235b7f5b18d4d58394511f76371d7cb Mon Sep 17 00:00:00 2001 From: Daniel Schaal Date: Sat, 29 Dec 2012 11:14:34 +0100 Subject: Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k. T: Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3006 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Daniel Schaal Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 3418bf988d01..afe9d8e8901d 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -77,6 +77,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x04CA, 0x3006) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -105,6 +106,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index acd5be40fc04..83ff97089e31 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -135,6 +135,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3 From 3a61eda81ebcfc006ebb1496764299d53e5bf67f Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:24:59 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04e Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index afe9d8e8901d..47fc6b5c6488 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -83,6 +83,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, + { USB_DEVICE(0x0489, 0xe04e) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -112,6 +113,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 83ff97089e31..9a52f8b6bfd9 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -141,6 +141,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 2582d529c44d12502a700f1c3db062b9f44679bc Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:25:00 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e056] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e056 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 47fc6b5c6488..be178949bc8b 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -84,6 +84,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x0489, 0xe04e) }, + { USB_DEVICE(0x0489, 0xe056) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -114,6 +115,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9a52f8b6bfd9..3f6a993539e8 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -142,6 +142,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 0a9ab9bdb3e891762553f667066190c1d22ad62b Mon Sep 17 00:00:00 2001 From: Anderson Lizardo Date: Sun, 6 Jan 2013 18:28:53 -0400 Subject: Bluetooth: Fix incorrect strncpy() in hidp_setup_hid() The length parameter should be sizeof(req->name) - 1 because there is no guarantee that string provided by userspace will contain the trailing '\0'. Can be easily reproduced by manually setting req->name to 128 non-zero bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on input subsystem: $ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af ("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys" field in struct hid_device due to overflow.) Cc: stable@vger.kernel.org Signed-off-by: Anderson Lizardo Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index b2bcbe2dc328..a7352ff3fd1e 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -931,7 +931,7 @@ static int hidp_setup_hid(struct hidp_session *session, hid->version = req->version; hid->country = req->country; - strncpy(hid->name, req->name, 128); + strncpy(hid->name, req->name, sizeof(req->name) - 1); snprintf(hid->phys, sizeof(hid->phys), "%pMR", &bt_sk(session->ctrl_sock->sk)->src); -- cgit v1.2.3 From f4d6f7dce71a5da93da50272ff1670bf2f1146b1 Mon Sep 17 00:00:00 2001 From: Sergio Cambra Date: Thu, 10 Jan 2013 01:06:55 +0100 Subject: Bluetooth device 04ca:3008 should use ath3k Output of /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3008 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sergio Cambra Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index be178949bc8b..33c9a44a9678 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x04CA, 0x3006) }, + { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3f6a993539e8..7e351e345476 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -136,6 +136,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3 From 7b064edae38d62d8587a8c574f93b53ce75ae749 Mon Sep 17 00:00:00 2001 From: Jaganath Kanakkassery Date: Thu, 10 Jan 2013 10:28:35 +0530 Subject: Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_core.c | 8 -------- net/bluetooth/l2cap_core.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 596660d37c5e..0f78e34220c9 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2810,14 +2810,6 @@ static void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb) if (conn) { hci_conn_enter_active_mode(conn, BT_POWER_FORCE_ACTIVE_OFF); - hci_dev_lock(hdev); - if (test_bit(HCI_MGMT, &hdev->dev_flags) && - !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) - mgmt_device_connected(hdev, &conn->dst, conn->type, - conn->dst_type, 0, NULL, 0, - conn->dev_class); - hci_dev_unlock(hdev); - /* Send to upper protocol */ l2cap_recv_acldata(conn, skb, flags); return; diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 2c78208d793e..22e658322845 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3727,6 +3727,17 @@ sendresp: static int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data) { + struct hci_dev *hdev = conn->hcon->hdev; + struct hci_conn *hcon = conn->hcon; + + hci_dev_lock(hdev); + if (test_bit(HCI_MGMT, &hdev->dev_flags) && + !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags)) + mgmt_device_connected(hdev, &hcon->dst, hcon->type, + hcon->dst_type, 0, NULL, 0, + hcon->dev_class); + hci_dev_unlock(hdev); + l2cap_connect(conn, cmd, data, L2CAP_CONN_RSP, 0); return 0; } -- cgit v1.2.3 From b7e98b5100aad9290d7f06fcb9d1e80f7f62f05f Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 3 Jan 2013 19:59:28 -0200 Subject: Bluetooth: Check if the hci connection exists in SCO shutdown Checking only for sco_conn seems to not be enough and lead to NULL dereferences in the code, check for hcon instead. <1>[11340.226404] BUG: unable to handle kernel NULL pointer dereference at 0000000 8 <4>[11340.226619] EIP is at __sco_sock_close+0xe8/0x1a0 <4>[11340.226629] EAX: f063a740 EBX: 00000000 ECX: f58f4544 EDX: 00000000 <4>[11340.226640] ESI: dec83e00 EDI: 5f9a081f EBP: e0fdff38 ESP: e0fdff1c <0>[11340.226674] Stack: <4>[11340.226682] c184db87 c1251028 dec83e00 e0fdff38 c1754aef dec83e00 00000000 e0fdff5c <4>[11340.226718] c184f587 e0fdff64 e0fdff68 5f9a081f e0fdff5c c1751852 d7813800 62262f10 <4>[11340.226752] e0fdff70 c1753c00 00000000 00000001 0000000d e0fdffac c175425c 00000041 <0>[11340.226793] Call Trace: <4>[11340.226813] [] ? sco_sock_clear_timer+0x27/0x60 <4>[11340.226831] [] ? local_bh_enable+0x68/0xd0 <4>[11340.226846] [] ? lock_sock_nested+0x4f/0x60 <4>[11340.226862] [] sco_sock_shutdown+0x67/0xb0 <4>[11340.226879] [] ? sockfd_lookup_light+0x22/0x80 <4>[11340.226897] [] sys_shutdown+0x30/0x60 <4>[11340.226912] [] sys_socketcall+0x1dc/0x2a0 <4>[11340.226929] [] ? trace_hardirqs_on_thunk+0xc/0x10 <4>[11340.226944] [] syscall_call+0x7/0xb <4>[11340.226960] [] ? restore_cur+0x5e/0xd7 <0>[11340.226969] Code: ff 4b 08 0f 94 c0 84 c0 74 20 80 7b 19 01 74 2f b8 0a 00 00 Reported-by: Chuansheng Liu Signed-off-by: Gustavo Padovan --- net/bluetooth/sco.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 531a93d613d4..57f250c20e39 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -352,7 +352,7 @@ static void __sco_sock_close(struct sock *sk) case BT_CONNECTED: case BT_CONFIG: - if (sco_pi(sk)->conn) { + if (sco_pi(sk)->conn->hcon) { sk->sk_state = BT_DISCONN; sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT); hci_conn_put(sco_pi(sk)->conn->hcon); -- cgit v1.2.3 From 4610476d89d53714ca94aae081fa035908bc137a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 10 Jan 2013 12:42:15 +0100 Subject: netfilter: xt_CT: fix unset return value if conntrack zone are disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/netfilter/xt_CT.c: In function ‘xt_ct_tg_check_v1’: net/netfilter/xt_CT.c:250:6: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] net/netfilter/xt_CT.c: In function ‘xt_ct_tg_check_v0’: net/netfilter/xt_CT.c:112:6: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] Reported-by: Borislav Petkov Acked-by: Borislav Petkov Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_CT.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index 2a0843081840..bde009ed8d3b 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -109,7 +109,7 @@ static int xt_ct_tg_check_v0(const struct xt_tgchk_param *par) struct xt_ct_target_info *info = par->targinfo; struct nf_conntrack_tuple t; struct nf_conn *ct; - int ret; + int ret = -EOPNOTSUPP; if (info->flags & ~XT_CT_NOTRACK) return -EINVAL; @@ -247,7 +247,7 @@ static int xt_ct_tg_check_v1(const struct xt_tgchk_param *par) struct xt_ct_target_info_v1 *info = par->targinfo; struct nf_conntrack_tuple t; struct nf_conn *ct; - int ret; + int ret = -EOPNOTSUPP; if (info->flags & ~XT_CT_NOTRACK) return -EINVAL; -- cgit v1.2.3 From d7b9c5204e9c6810a20d509ee47bc70419096e59 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:10 -0800 Subject: mwifiex: update config_bands during infra association Currently "adapter->config_bands" is updated during infra association only if channel is provided by user in "iw connect" command. config_bands is used while preparing association request to calculate supported rates by intersecting our rates with the rates advertised by AP. There is corner case in which we include zero rates in supported rates TLV based on previous IBSS network history, which leads to association failure. This patch fixes the problem by correctly updating config_bands. Cc: "3.7.y" Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 15 +-------------- drivers/net/wireless/mwifiex/sta_ioctl.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index efe525be27dd..e74e1b99419a 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1459,7 +1459,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, struct cfg80211_ssid req_ssid; int ret, auth_type = 0; struct cfg80211_bss *bss = NULL; - u8 is_scanning_required = 0, config_bands = 0; + u8 is_scanning_required = 0; memset(&req_ssid, 0, sizeof(struct cfg80211_ssid)); @@ -1478,19 +1478,6 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, /* disconnect before try to associate */ mwifiex_deauthenticate(priv, NULL); - if (channel) { - if (mode == NL80211_IFTYPE_STATION) { - if (channel->band == IEEE80211_BAND_2GHZ) - config_bands = BAND_B | BAND_G | BAND_GN; - else - config_bands = BAND_A | BAND_AN; - - if (!((config_bands | priv->adapter->fw_bands) & - ~priv->adapter->fw_bands)) - priv->adapter->config_bands = config_bands; - } - } - /* As this is new association, clear locally stored * keys and security related flags */ priv->sec_info.wpa_enabled = false; diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 60e88b58039d..f542bb8ccbc8 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -283,6 +283,20 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (ret) goto done; + if (bss_desc) { + u8 config_bands = 0; + + if (mwifiex_band_to_radio_type((u8) bss_desc->bss_band) + == HostCmd_SCAN_RADIO_TYPE_BG) + config_bands = BAND_B | BAND_G | BAND_GN; + else + config_bands = BAND_A | BAND_AN; + + if (!((config_bands | adapter->fw_bands) & + ~adapter->fw_bands)) + adapter->config_bands = config_bands; + } + ret = mwifiex_check_network_compatibility(priv, bss_desc); if (ret) goto done; -- cgit v1.2.3 From 3b86acb8088d0c7c4cddc340a13dec5cef110e30 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:11 -0800 Subject: mwifiex: correct config_bands handling for ibss network BAND_G is implicit when BAND_GN is present. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index e74e1b99419a..cdb11b3964e2 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1694,7 +1694,7 @@ static int mwifiex_set_ibss_params(struct mwifiex_private *priv, if (cfg80211_get_chandef_type(¶ms->chandef) != NL80211_CHAN_NO_HT) - config_bands |= BAND_GN; + config_bands |= BAND_G | BAND_GN; } else { if (cfg80211_get_chandef_type(¶ms->chandef) == NL80211_CHAN_NO_HT) -- cgit v1.2.3 From 0981c3b24ef664f5611008a6e6d0622fac6d892b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 9 Jan 2013 16:07:48 +0530 Subject: ath9k_htc: Fix memory leak SKBs that are allocated in the HTC layer do not have callbacks registered and hence ended up not being freed, Fix this by freeing them properly in the TX completion routine. Cc: Reported-by: Larry Finger Signed-off-by: Sujith Manoharan Tested-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index 4a9570dfba72..aac4a406a513 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -344,6 +344,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle, endpoint->ep_callbacks.tx(endpoint->ep_callbacks.priv, skb, htc_hdr->endpoint_id, txok); + } else { + kfree_skb(skb); } } -- cgit v1.2.3 From a3dc48e82bb146ef11cf75676c8410c1df29b0c4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:52 +0100 Subject: ath9k: do not link receive buffers during flush On AR9300 the rx FIFO needs to be empty during reset to ensure that no further DMA activity is generated, otherwise it might lead to memory corruption issues. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d4df98a938bf..01c3ba47a5b9 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -744,6 +744,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, return NULL; } + list_del(&bf->list); if (!bf->bf_mpdu) return bf; @@ -1254,14 +1255,15 @@ requeue_drop_frag: sc->rx.frag = NULL; } requeue: + list_add_tail(&bf->list, &sc->rx.rxbuf); + if (flush) + continue; + if (edma) { - list_add_tail(&bf->list, &sc->rx.rxbuf); ath_rx_edma_buf_link(sc, qtype); } else { - list_move_tail(&bf->list, &sc->rx.rxbuf); ath_rx_buf_link(sc, bf); - if (!flush) - ath9k_hw_rxena(ah); + ath9k_hw_rxena(ah); } } while (1); -- cgit v1.2.3 From 1adb2e2b5f85023d17eb4f95386a57029df27c88 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:53 +0100 Subject: ath9k: fix double-free bug on beacon generate failure When the next beacon is sent, the ath_buf from the previous run is reused. If getting a new beacon from mac80211 fails, bf->bf_mpdu is not reset, yet the skb is freed, leading to a double-free on the next beacon tx attempt, resulting in a system crash. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 531fffd801a3..4eb269d6b974 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -147,6 +147,7 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw, skb->len, DMA_TO_DEVICE); dev_kfree_skb_any(skb); bf->bf_buf_addr = 0; + bf->bf_mpdu = NULL; } skb = ieee80211_beacon_get(hw, vif); -- cgit v1.2.3 From 3adcf20afb585993ffee24de36d1975f6b26b120 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:54 +0100 Subject: ath9k: remove the WARN_ON that triggers if generating a beacon fails During teardown, mac80211 will not return a new beacon. This is normal and handled properly in the driver, so there's no need to spam the user with a kernel warning here. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 4eb269d6b974..2ca355e94da6 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -360,7 +360,6 @@ void ath9k_beacon_tasklet(unsigned long data) return; bf = ath9k_beacon_generate(sc->hw, vif); - WARN_ON(!bf); if (sc->beacon.bmisscnt != 0) { ath_dbg(common, BSTUCK, "resume beacon xmit after %u misses\n", -- cgit v1.2.3 From 7fc00a3054b70b1794c2d64db703eb467ad0365c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:55 +0100 Subject: ath9k: add a better fix for the rx tasklet vs rx flush race Ensure that the rx tasklet is no longer running when entering the reset path. Also remove the distinction between flush and no-flush frame processing. If a frame has been received and ACKed by the hardware, the stack needs to see it, so that the BA receive window does not go out of sync. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/debug.c | 1 - drivers/net/wireless/ath/ath9k/debug.h | 2 -- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ drivers/net/wireless/ath/ath9k/recv.c | 15 --------------- 5 files changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 86e26a19efda..7335e9ef0249 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -646,7 +646,6 @@ void ath_ant_comb_update(struct ath_softc *sc); enum sc_op_flags { SC_OP_INVALID, SC_OP_BEACONS, - SC_OP_RXFLUSH, SC_OP_ANI_RUN, SC_OP_PRIM_STA_VIF, SC_OP_HW_RESET, diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 13ff9edc2401..e585fc827c50 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -861,7 +861,6 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, RXS_ERR("RX-LENGTH-ERR", rx_len_err); RXS_ERR("RX-OOM-ERR", rx_oom_err); RXS_ERR("RX-RATE-ERR", rx_rate_err); - RXS_ERR("RX-DROP-RXFLUSH", rx_drop_rxflush); RXS_ERR("RX-TOO-MANY-FRAGS", rx_too_many_frags_err); PHY_ERR("UNDERRUN ERR", ATH9K_PHYERR_UNDERRUN); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 375c3b46411e..6df2ab62dcb7 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -216,7 +216,6 @@ struct ath_tx_stats { * @rx_oom_err: No. of frames dropped due to OOM issues. * @rx_rate_err: No. of frames dropped due to rate errors. * @rx_too_many_frags_err: Frames dropped due to too-many-frags received. - * @rx_drop_rxflush: No. of frames dropped due to RX-FLUSH. * @rx_beacons: No. of beacons received. * @rx_frags: No. of rx-fragements received. */ @@ -235,7 +234,6 @@ struct ath_rx_stats { u32 rx_oom_err; u32 rx_rate_err; u32 rx_too_many_frags_err; - u32 rx_drop_rxflush; u32 rx_beacons; u32 rx_frags; }; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index be30a9af1528..d3cf01ec2d15 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,6 +196,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); + tasklet_disable(&sc->intr_tq); + if (!ath_stoprecv(sc)) ret = false; @@ -210,6 +212,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath_flushrecv(sc); } + tasklet_enable(&sc->intr_tq); + return ret; } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 01c3ba47a5b9..6b83b3bbfe8c 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -286,7 +286,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) spin_lock_init(&sc->sc_pcu_lock); spin_lock_init(&sc->rx.rxbuflock); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -501,11 +500,9 @@ bool ath_stoprecv(struct ath_softc *sc) void ath_flushrecv(struct ath_softc *sc) { - set_bit(SC_OP_RXFLUSH, &sc->sc_flags); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_rx_tasklet(sc, 1, true); ath_rx_tasklet(sc, 1, false); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); } static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) @@ -1067,9 +1064,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) do { bool decrypt_error = false; - /* If handling rx interrupt and flush is in progress => exit */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags) && (flush == 0)) - break; memset(&rs, 0, sizeof(rs)); if (edma) @@ -1112,15 +1106,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) ath_debug_stat_rx(sc, &rs); - /* - * If we're asked to flush receive queue, directly - * chain it back at the queue without processing it. - */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags)) { - RX_STAT_INC(rx_drop_rxflush); - goto requeue_drop_frag; - } - memset(rxs, 0, sizeof(struct ieee80211_rx_status)); rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; -- cgit v1.2.3 From 4b883f021b9ccf2df3d14425e6e610281fb6a35e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:56 +0100 Subject: ath9k: fix rx flush handling Right now the rx flush is not doing anything useful on AR9003+, as it only works if the buffers in the rx FIFO have not been purged yet, as is done by ath_stoprecv. To fix this, always call ath_flushrecv from within ath_stoprecv before the FIFO is emptied, but still after the hw receive path has been stopped. This ensures that frames received (and ACKed by the hardware) shortly before a reset will be seen by the software, which should improve A-MPDU session stability. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/main.c | 16 +++------------- drivers/net/wireless/ath/ath9k/recv.c | 16 +++++++++------- 3 files changed, 12 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 7335e9ef0249..32b2d5cd9a5a 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -328,7 +328,6 @@ struct ath_rx { int ath_startrecv(struct ath_softc *sc); bool ath_stoprecv(struct ath_softc *sc); -void ath_flushrecv(struct ath_softc *sc); u32 ath_calcrxfilter(struct ath_softc *sc); int ath_rx_init(struct ath_softc *sc, int nbufs); void ath_rx_cleanup(struct ath_softc *sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index d3cf01ec2d15..9844b758f81d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -182,7 +182,7 @@ static void ath_restart_work(struct ath_softc *sc) ath_start_ani(sc); } -static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) +static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) { struct ath_hw *ah = sc->sc_ah; bool ret = true; @@ -204,14 +204,6 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - if (!flush) { - if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); - } else { - ath_flushrecv(sc); - } - tasklet_enable(&sc->intr_tq); return ret; @@ -266,7 +258,6 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, struct ath_common *common = ath9k_hw_common(ah); struct ath9k_hw_cal_data *caldata = NULL; bool fastcc = true; - bool flush = false; int r; __ath_cancel_work(sc); @@ -280,11 +271,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, if (!hchan) { fastcc = false; - flush = true; hchan = ah->curchan; } - if (!ath_prepare_reset(sc, retry_tx, flush)) + if (!ath_prepare_reset(sc, retry_tx)) fastcc = false; ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", @@ -808,7 +798,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath9k_hw_cfg_gpio_input(ah, ah->led_pin); } - ath_prepare_reset(sc, false, true); + ath_prepare_reset(sc, false); if (sc->rx.frag) { dev_kfree_skb_any(sc->rx.frag); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6b83b3bbfe8c..67f58d4bb10e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -472,6 +472,13 @@ start_recv: return 0; } +static void ath_flushrecv(struct ath_softc *sc) +{ + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) + ath_rx_tasklet(sc, 1, true); + ath_rx_tasklet(sc, 1, false); +} + bool ath_stoprecv(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; @@ -482,6 +489,8 @@ bool ath_stoprecv(struct ath_softc *sc) ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); + ath_flushrecv(sc); + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_edma_stop_recv(sc); else @@ -498,13 +507,6 @@ bool ath_stoprecv(struct ath_softc *sc) return stopped && !reset; } -void ath_flushrecv(struct ath_softc *sc) -{ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); -} - static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) { /* Check whether the Beacon frame has DTIM indicating buffered bc/mc */ -- cgit v1.2.3 From a1fe52801a992e590cdaee2fb47a94bac9b5da90 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 10 Jan 2013 11:20:48 +0100 Subject: brcmsmac: increase timer reference count for new timers only On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Cc: stable@vger.kernel.org Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 1fbd8ecbe2ea..0f71d1d4339d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1407,9 +1407,10 @@ void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) #endif t->ms = ms; t->periodic = (bool) periodic; - t->set = true; - - atomic_inc(&t->wl->callbacks); + if (!t->set) { + t->set = true; + atomic_inc(&t->wl->callbacks); + } ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); } -- cgit v1.2.3 From 1e47ee8367babe6a5e8adf44a714c7086657b87e Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 10 Jan 2013 16:12:01 +0100 Subject: netfilter: nf_conntrack: fix BUG_ON while removing nf_conntrack with netns canqun zhang reported that we're hitting BUG_ON in the nf_conntrack_destroy path when calling kfree_skb while rmmod'ing the nf_conntrack module. Currently, the nf_ct_destroy hook is being set to NULL in the destroy path of conntrack.init_net. However, this is a problem since init_net may be destroyed before any other existing netns (we cannot assume any specific ordering while releasing existing netns according to what I read in recent emails). Thanks to Gao feng for initial patch to address this issue. Reported-by: canqun zhang Acked-by: Gao feng Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_core.h | 2 ++ net/netfilter/nf_conntrack_core.c | 9 +++++---- net/netfilter/nf_conntrack_standalone.c | 1 + 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h index d8f5b9f52169..e98aeb3da033 100644 --- a/include/net/netfilter/nf_conntrack_core.h +++ b/include/net/netfilter/nf_conntrack_core.h @@ -31,6 +31,8 @@ extern void nf_conntrack_cleanup(struct net *net); extern int nf_conntrack_proto_init(struct net *net); extern void nf_conntrack_proto_fini(struct net *net); +extern void nf_conntrack_cleanup_end(void); + extern bool nf_ct_get_tuple(const struct sk_buff *skb, unsigned int nhoff, diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 016d95ead930..e4a0c4fb3a7c 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1376,11 +1376,12 @@ void nf_conntrack_cleanup(struct net *net) synchronize_net(); nf_conntrack_proto_fini(net); nf_conntrack_cleanup_net(net); +} - if (net_eq(net, &init_net)) { - RCU_INIT_POINTER(nf_ct_destroy, NULL); - nf_conntrack_cleanup_init_net(); - } +void nf_conntrack_cleanup_end(void) +{ + RCU_INIT_POINTER(nf_ct_destroy, NULL); + nf_conntrack_cleanup_init_net(); } void *nf_ct_alloc_hashtable(unsigned int *sizep, int nulls) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 363285d544a1..e7185c684816 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -575,6 +575,7 @@ static int __init nf_conntrack_standalone_init(void) static void __exit nf_conntrack_standalone_fini(void) { unregister_pernet_subsys(&nf_conntrack_net_ops); + nf_conntrack_cleanup_end(); } module_init(nf_conntrack_standalone_init); -- cgit v1.2.3 From 5b76c4948fe6977bead2359c2054f3e6a2dcf3d0 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Thu, 10 Jan 2013 12:30:05 +0000 Subject: netfilter: x_tables: print correct hook names for ARP arptables 0.0.4 (released on 10th Jan 2013) supports calling the CLASSIFY target, but on adding a rule to the wrong chain, the diagnostic is as follows: # arptables -A INPUT -j CLASSIFY --set-class 0:0 arptables: Invalid argument # dmesg | tail -n1 x_tables: arp_tables: CLASSIFY target: used from hooks PREROUTING, but only usable from INPUT/FORWARD This is incorrect, since xt_CLASSIFY.c does specify (1 << NF_ARP_OUT) | (1 << NF_ARP_FORWARD). This patch corrects the x_tables diagnostic message to print the proper hook names for the NFPROTO_ARP case. Affects all kernels down to and including v2.6.31. Signed-off-by: Jan Engelhardt Signed-off-by: Pablo Neira Ayuso --- net/netfilter/x_tables.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index 8d987c3573fd..7b3a9e5999c0 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -345,19 +345,27 @@ int xt_find_revision(u8 af, const char *name, u8 revision, int target, } EXPORT_SYMBOL_GPL(xt_find_revision); -static char *textify_hooks(char *buf, size_t size, unsigned int mask) +static char * +textify_hooks(char *buf, size_t size, unsigned int mask, uint8_t nfproto) { - static const char *const names[] = { + static const char *const inetbr_names[] = { "PREROUTING", "INPUT", "FORWARD", "OUTPUT", "POSTROUTING", "BROUTING", }; - unsigned int i; + static const char *const arp_names[] = { + "INPUT", "FORWARD", "OUTPUT", + }; + const char *const *names; + unsigned int i, max; char *p = buf; bool np = false; int res; + names = (nfproto == NFPROTO_ARP) ? arp_names : inetbr_names; + max = (nfproto == NFPROTO_ARP) ? ARRAY_SIZE(arp_names) : + ARRAY_SIZE(inetbr_names); *p = '\0'; - for (i = 0; i < ARRAY_SIZE(names); ++i) { + for (i = 0; i < max; ++i) { if (!(mask & (1 << i))) continue; res = snprintf(p, size, "%s%s", np ? "/" : "", names[i]); @@ -402,8 +410,10 @@ int xt_check_match(struct xt_mtchk_param *par, pr_err("%s_tables: %s match: used from hooks %s, but only " "valid from %s\n", xt_prefix[par->family], par->match->name, - textify_hooks(used, sizeof(used), par->hook_mask), - textify_hooks(allow, sizeof(allow), par->match->hooks)); + textify_hooks(used, sizeof(used), par->hook_mask, + par->family), + textify_hooks(allow, sizeof(allow), par->match->hooks, + par->family)); return -EINVAL; } if (par->match->proto && (par->match->proto != proto || inv_proto)) { @@ -575,8 +585,10 @@ int xt_check_target(struct xt_tgchk_param *par, pr_err("%s_tables: %s target: used from hooks %s, but only " "usable from %s\n", xt_prefix[par->family], par->target->name, - textify_hooks(used, sizeof(used), par->hook_mask), - textify_hooks(allow, sizeof(allow), par->target->hooks)); + textify_hooks(used, sizeof(used), par->hook_mask, + par->family), + textify_hooks(allow, sizeof(allow), par->target->hooks, + par->family)); return -EINVAL; } if (par->target->proto && (par->target->proto != proto || inv_proto)) { -- cgit v1.2.3 From 463e3ed3eacc8f47866e5d612bd8ee0bcee5e2f0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 10:50:15 +0100 Subject: ath9k: remove sc->rx.rxbuflock to fix a deadlock The commit "ath9k: fix rx flush handling" added a deadlock that happens because ath_rx_tasklet is called in a section that has already taken the rx buffer lock. It seems that the only purpose of the rxbuflock was a band-aid fix to the reset vs rx tasklet race, which has been properly fixed in the commit "ath9k: add a better fix for the rx tasklet vs rx flush race". Now that the fix is in, we can safely remove the lock to avoid such issues. Cc: stable@vger.kernel.org Reported-by: Sujith Manoharan Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/recv.c | 13 ------------- 2 files changed, 14 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 32b2d5cd9a5a..42794c546a40 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -317,7 +317,6 @@ struct ath_rx { u32 *rxlink; u32 num_pkts; unsigned int rxfilter; - spinlock_t rxbuflock; struct list_head rxbuf; struct ath_descdma rxdma; struct ath_buf *rx_bufptr; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 67f58d4bb10e..90752f246970 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -254,8 +254,6 @@ rx_init_fail: static void ath_edma_start_recv(struct ath_softc *sc) { - spin_lock_bh(&sc->rx.rxbuflock); - ath9k_hw_rxena(sc->sc_ah); ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP, @@ -267,8 +265,6 @@ static void ath_edma_start_recv(struct ath_softc *sc) ath_opmode_init(sc); ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - - spin_unlock_bh(&sc->rx.rxbuflock); } static void ath_edma_stop_recv(struct ath_softc *sc) @@ -285,7 +281,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) int error = 0; spin_lock_init(&sc->sc_pcu_lock); - spin_lock_init(&sc->rx.rxbuflock); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -446,7 +441,6 @@ int ath_startrecv(struct ath_softc *sc) return 0; } - spin_lock_bh(&sc->rx.rxbuflock); if (list_empty(&sc->rx.rxbuf)) goto start_recv; @@ -467,8 +461,6 @@ start_recv: ath_opmode_init(sc); ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - spin_unlock_bh(&sc->rx.rxbuflock); - return 0; } @@ -484,7 +476,6 @@ bool ath_stoprecv(struct ath_softc *sc) struct ath_hw *ah = sc->sc_ah; bool stopped, reset = false; - spin_lock_bh(&sc->rx.rxbuflock); ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); @@ -495,7 +486,6 @@ bool ath_stoprecv(struct ath_softc *sc) ath_edma_stop_recv(sc); else sc->rx.rxlink = NULL; - spin_unlock_bh(&sc->rx.rxbuflock); if (!(ah->ah_flags & AH_UNPLUGGED) && unlikely(!stopped)) { @@ -1059,7 +1049,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) dma_type = DMA_FROM_DEVICE; qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP; - spin_lock_bh(&sc->rx.rxbuflock); tsf = ath9k_hw_gettsf64(ah); tsf_lower = tsf & 0xffffffff; @@ -1254,8 +1243,6 @@ requeue: } } while (1); - spin_unlock_bh(&sc->rx.rxbuflock); - if (!(ah->imask & ATH9K_INT_RXEOL)) { ah->imask |= (ATH9K_INT_RXEOL | ATH9K_INT_RXORN); ath9k_hw_set_interrupts(ah); -- cgit v1.2.3 From 4668cce527acb3bd048c5e6c99b157a14b214671 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 16:56:46 +0100 Subject: ath9k: disable the tasklet before taking the PCU lock Fixes a reported CPU soft lockup where the tasklet tries to acquire the lock and blocks while ath_prepare_reset (holding the lock) waits for it to complete. Cc: stable@vger.kernel.org Reported-by: Robert Shade Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9844b758f81d..3796e65c26f1 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,16 +196,12 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - tasklet_disable(&sc->intr_tq); - if (!ath_stoprecv(sc)) ret = false; if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - tasklet_enable(&sc->intr_tq); - return ret; } @@ -262,6 +258,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, __ath_cancel_work(sc); + tasklet_disable(&sc->intr_tq); spin_lock_bh(&sc->sc_pcu_lock); if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) { @@ -296,6 +293,8 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, out: spin_unlock_bh(&sc->sc_pcu_lock); + tasklet_enable(&sc->intr_tq); + return r; } -- cgit v1.2.3 From cce894bb824429fd312706c7012acae43e725865 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 13 Jan 2013 18:21:51 +0000 Subject: tcp: fix a panic on UP machines in reqsk_fastopen_remove spin_is_locked() on a non !SMP build is kind of useless. BUG_ON(!spin_is_locked(xx)) is guaranteed to crash. Just remove this check in reqsk_fastopen_remove() as the callers do hold the socket lock. Reported-by: Ketan Kulkarni Signed-off-by: Eric Dumazet Cc: Jerry Chu Cc: Yuchung Cheng Cc: Dave Taht Acked-by: H.K. Jerry Chu Signed-off-by: David S. Miller --- net/core/request_sock.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/core/request_sock.c b/net/core/request_sock.c index c31d9e8668c3..4425148d2b51 100644 --- a/net/core/request_sock.c +++ b/net/core/request_sock.c @@ -186,8 +186,6 @@ void reqsk_fastopen_remove(struct sock *sk, struct request_sock *req, struct fastopen_queue *fastopenq = inet_csk(lsk)->icsk_accept_queue.fastopenq; - BUG_ON(!spin_is_locked(&sk->sk_lock.slock) && !sock_owned_by_user(sk)); - tcp_sk(sk)->fastopen_rsk = NULL; spin_lock_bh(&fastopenq->lock); fastopenq->qlen--; -- cgit v1.2.3 From 6f96c142f77c96a34ac377a3616ee7abcd77fb4d Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Mon, 14 Jan 2013 07:12:13 +0000 Subject: selinux: add the "attach_queue" permission to the "tun_socket" class Add a new permission to align with the new TUN multiqueue support, "tun_socket:attach_queue". The corresponding SELinux reference policy patch is show below: diff --git a/policy/flask/access_vectors b/policy/flask/access_vectors index 28802c5..a0664a1 100644 --- a/policy/flask/access_vectors +++ b/policy/flask/access_vectors @@ -827,6 +827,9 @@ class kernel_service class tun_socket inherits socket +{ + attach_queue +} class x_pointer inherits x_device Signed-off-by: Paul Moore Acked-by: Eric Paris Tested-by: Jason Wang Signed-off-by: David S. Miller --- security/selinux/include/classmap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/selinux/include/classmap.h b/security/selinux/include/classmap.h index df2de54a958d..14d04e63b1f0 100644 --- a/security/selinux/include/classmap.h +++ b/security/selinux/include/classmap.h @@ -150,6 +150,6 @@ struct security_class_mapping secclass_map[] = { NULL } }, { "kernel_service", { "use_as_override", "create_files_as", NULL } }, { "tun_socket", - { COMMON_SOCK_PERMS, NULL } }, + { COMMON_SOCK_PERMS, "attach_queue", NULL } }, { NULL } }; -- cgit v1.2.3 From 5dbbaf2de89613d19a9286d4db0a535ca2735d26 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Mon, 14 Jan 2013 07:12:19 +0000 Subject: tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore Acked-by: Eric Paris Tested-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 23 +++++++++++---- include/linux/security.h | 59 ++++++++++++++++++++++++++++++--------- security/capability.c | 24 ++++++++++++++-- security/security.c | 28 +++++++++++++++---- security/selinux/hooks.c | 50 +++++++++++++++++++++++++-------- security/selinux/include/objsec.h | 4 +++ 6 files changed, 151 insertions(+), 37 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index af372d0957fe..c81680dc10eb 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -185,6 +185,7 @@ struct tun_struct { unsigned long ageing_time; unsigned int numdisabled; struct list_head disabled; + void *security; }; static inline u32 tun_hashfn(u32 rxhash) @@ -490,6 +491,10 @@ static int tun_attach(struct tun_struct *tun, struct file *file) struct tun_file *tfile = file->private_data; int err; + err = security_tun_dev_attach(tfile->socket.sk, tun->security); + if (err < 0) + goto out; + err = -EINVAL; if (rtnl_dereference(tfile->tun)) goto out; @@ -1373,6 +1378,7 @@ static void tun_free_netdev(struct net_device *dev) BUG_ON(!(list_empty(&tun->disabled))); tun_flow_uninit(tun); + security_tun_dev_free_security(tun->security); free_netdev(dev); } @@ -1562,7 +1568,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) if (tun_not_capable(tun)) return -EPERM; - err = security_tun_dev_attach(tfile->socket.sk); + err = security_tun_dev_open(tun->security); if (err < 0) return err; @@ -1619,7 +1625,9 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) spin_lock_init(&tun->lock); - security_tun_dev_post_create(&tfile->sk); + err = security_tun_dev_alloc_security(&tun->security); + if (err < 0) + goto err_free_dev; tun_net_init(dev); @@ -1789,10 +1797,14 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr) if (ifr->ifr_flags & IFF_ATTACH_QUEUE) { tun = tfile->detached; - if (!tun) + if (!tun) { ret = -EINVAL; - else - ret = tun_attach(tun, file); + goto unlock; + } + ret = security_tun_dev_attach_queue(tun->security); + if (ret < 0) + goto unlock; + ret = tun_attach(tun, file); } else if (ifr->ifr_flags & IFF_DETACH_QUEUE) { tun = rtnl_dereference(tfile->tun); if (!tun || !(tun->flags & TUN_TAP_MQ)) @@ -1802,6 +1814,7 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr) } else ret = -EINVAL; +unlock: rtnl_unlock(); return ret; } diff --git a/include/linux/security.h b/include/linux/security.h index 0f6afc657f77..eee7478cda70 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -989,17 +989,29 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * tells the LSM to decrement the number of secmark labeling rules loaded * @req_classify_flow: * Sets the flow's sid to the openreq sid. + * @tun_dev_alloc_security: + * This hook allows a module to allocate a security structure for a TUN + * device. + * @security pointer to a security structure pointer. + * Returns a zero on success, negative values on failure. + * @tun_dev_free_security: + * This hook allows a module to free the security structure for a TUN + * device. + * @security pointer to the TUN device's security structure * @tun_dev_create: * Check permissions prior to creating a new TUN device. - * @tun_dev_post_create: - * This hook allows a module to update or allocate a per-socket security - * structure. - * @sk contains the newly created sock structure. + * @tun_dev_attach_queue: + * Check permissions prior to attaching to a TUN device queue. + * @security pointer to the TUN device's security structure. * @tun_dev_attach: - * Check permissions prior to attaching to a persistent TUN device. This - * hook can also be used by the module to update any security state + * This hook can be used by the module to update any security state * associated with the TUN device's sock structure. * @sk contains the existing sock structure. + * @security pointer to the TUN device's security structure. + * @tun_dev_open: + * This hook can be used by the module to update any security state + * associated with the TUN device's security structure. + * @security pointer to the TUN devices's security structure. * * Security hooks for XFRM operations. * @@ -1620,9 +1632,12 @@ struct security_operations { void (*secmark_refcount_inc) (void); void (*secmark_refcount_dec) (void); void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl); - int (*tun_dev_create)(void); - void (*tun_dev_post_create)(struct sock *sk); - int (*tun_dev_attach)(struct sock *sk); + int (*tun_dev_alloc_security) (void **security); + void (*tun_dev_free_security) (void *security); + int (*tun_dev_create) (void); + int (*tun_dev_attach_queue) (void *security); + int (*tun_dev_attach) (struct sock *sk, void *security); + int (*tun_dev_open) (void *security); #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM @@ -2566,9 +2581,12 @@ void security_inet_conn_established(struct sock *sk, int security_secmark_relabel_packet(u32 secid); void security_secmark_refcount_inc(void); void security_secmark_refcount_dec(void); +int security_tun_dev_alloc_security(void **security); +void security_tun_dev_free_security(void *security); int security_tun_dev_create(void); -void security_tun_dev_post_create(struct sock *sk); -int security_tun_dev_attach(struct sock *sk); +int security_tun_dev_attach_queue(void *security); +int security_tun_dev_attach(struct sock *sk, void *security); +int security_tun_dev_open(void *security); #else /* CONFIG_SECURITY_NETWORK */ static inline int security_unix_stream_connect(struct sock *sock, @@ -2733,16 +2751,31 @@ static inline void security_secmark_refcount_dec(void) { } +static inline int security_tun_dev_alloc_security(void **security) +{ + return 0; +} + +static inline void security_tun_dev_free_security(void *security) +{ +} + static inline int security_tun_dev_create(void) { return 0; } -static inline void security_tun_dev_post_create(struct sock *sk) +static inline int security_tun_dev_attach_queue(void *security) +{ + return 0; +} + +static inline int security_tun_dev_attach(struct sock *sk, void *security) { + return 0; } -static inline int security_tun_dev_attach(struct sock *sk) +static inline int security_tun_dev_open(void *security) { return 0; } diff --git a/security/capability.c b/security/capability.c index 0fe5a026aef8..579775088967 100644 --- a/security/capability.c +++ b/security/capability.c @@ -709,16 +709,31 @@ static void cap_req_classify_flow(const struct request_sock *req, { } +static int cap_tun_dev_alloc_security(void **security) +{ + return 0; +} + +static void cap_tun_dev_free_security(void *security) +{ +} + static int cap_tun_dev_create(void) { return 0; } -static void cap_tun_dev_post_create(struct sock *sk) +static int cap_tun_dev_attach_queue(void *security) +{ + return 0; +} + +static int cap_tun_dev_attach(struct sock *sk, void *security) { + return 0; } -static int cap_tun_dev_attach(struct sock *sk) +static int cap_tun_dev_open(void *security) { return 0; } @@ -1050,8 +1065,11 @@ void __init security_fixup_ops(struct security_operations *ops) set_to_cap_if_null(ops, secmark_refcount_inc); set_to_cap_if_null(ops, secmark_refcount_dec); set_to_cap_if_null(ops, req_classify_flow); + set_to_cap_if_null(ops, tun_dev_alloc_security); + set_to_cap_if_null(ops, tun_dev_free_security); set_to_cap_if_null(ops, tun_dev_create); - set_to_cap_if_null(ops, tun_dev_post_create); + set_to_cap_if_null(ops, tun_dev_open); + set_to_cap_if_null(ops, tun_dev_attach_queue); set_to_cap_if_null(ops, tun_dev_attach); #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM diff --git a/security/security.c b/security/security.c index daa97f4ac9d1..7b88c6aeaed4 100644 --- a/security/security.c +++ b/security/security.c @@ -1254,24 +1254,42 @@ void security_secmark_refcount_dec(void) } EXPORT_SYMBOL(security_secmark_refcount_dec); +int security_tun_dev_alloc_security(void **security) +{ + return security_ops->tun_dev_alloc_security(security); +} +EXPORT_SYMBOL(security_tun_dev_alloc_security); + +void security_tun_dev_free_security(void *security) +{ + security_ops->tun_dev_free_security(security); +} +EXPORT_SYMBOL(security_tun_dev_free_security); + int security_tun_dev_create(void) { return security_ops->tun_dev_create(); } EXPORT_SYMBOL(security_tun_dev_create); -void security_tun_dev_post_create(struct sock *sk) +int security_tun_dev_attach_queue(void *security) { - return security_ops->tun_dev_post_create(sk); + return security_ops->tun_dev_attach_queue(security); } -EXPORT_SYMBOL(security_tun_dev_post_create); +EXPORT_SYMBOL(security_tun_dev_attach_queue); -int security_tun_dev_attach(struct sock *sk) +int security_tun_dev_attach(struct sock *sk, void *security) { - return security_ops->tun_dev_attach(sk); + return security_ops->tun_dev_attach(sk, security); } EXPORT_SYMBOL(security_tun_dev_attach); +int security_tun_dev_open(void *security) +{ + return security_ops->tun_dev_open(security); +} +EXPORT_SYMBOL(security_tun_dev_open); + #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 61a53367d029..ef26e9611ffb 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4399,6 +4399,24 @@ static void selinux_req_classify_flow(const struct request_sock *req, fl->flowi_secid = req->secid; } +static int selinux_tun_dev_alloc_security(void **security) +{ + struct tun_security_struct *tunsec; + + tunsec = kzalloc(sizeof(*tunsec), GFP_KERNEL); + if (!tunsec) + return -ENOMEM; + tunsec->sid = current_sid(); + + *security = tunsec; + return 0; +} + +static void selinux_tun_dev_free_security(void *security) +{ + kfree(security); +} + static int selinux_tun_dev_create(void) { u32 sid = current_sid(); @@ -4414,8 +4432,17 @@ static int selinux_tun_dev_create(void) NULL); } -static void selinux_tun_dev_post_create(struct sock *sk) +static int selinux_tun_dev_attach_queue(void *security) { + struct tun_security_struct *tunsec = security; + + return avc_has_perm(current_sid(), tunsec->sid, SECCLASS_TUN_SOCKET, + TUN_SOCKET__ATTACH_QUEUE, NULL); +} + +static int selinux_tun_dev_attach(struct sock *sk, void *security) +{ + struct tun_security_struct *tunsec = security; struct sk_security_struct *sksec = sk->sk_security; /* we don't currently perform any NetLabel based labeling here and it @@ -4425,20 +4452,19 @@ static void selinux_tun_dev_post_create(struct sock *sk) * cause confusion to the TUN user that had no idea network labeling * protocols were being used */ - /* see the comments in selinux_tun_dev_create() about why we don't use - * the sockcreate SID here */ - - sksec->sid = current_sid(); + sksec->sid = tunsec->sid; sksec->sclass = SECCLASS_TUN_SOCKET; + + return 0; } -static int selinux_tun_dev_attach(struct sock *sk) +static int selinux_tun_dev_open(void *security) { - struct sk_security_struct *sksec = sk->sk_security; + struct tun_security_struct *tunsec = security; u32 sid = current_sid(); int err; - err = avc_has_perm(sid, sksec->sid, SECCLASS_TUN_SOCKET, + err = avc_has_perm(sid, tunsec->sid, SECCLASS_TUN_SOCKET, TUN_SOCKET__RELABELFROM, NULL); if (err) return err; @@ -4446,8 +4472,7 @@ static int selinux_tun_dev_attach(struct sock *sk) TUN_SOCKET__RELABELTO, NULL); if (err) return err; - - sksec->sid = sid; + tunsec->sid = sid; return 0; } @@ -5642,9 +5667,12 @@ static struct security_operations selinux_ops = { .secmark_refcount_inc = selinux_secmark_refcount_inc, .secmark_refcount_dec = selinux_secmark_refcount_dec, .req_classify_flow = selinux_req_classify_flow, + .tun_dev_alloc_security = selinux_tun_dev_alloc_security, + .tun_dev_free_security = selinux_tun_dev_free_security, .tun_dev_create = selinux_tun_dev_create, - .tun_dev_post_create = selinux_tun_dev_post_create, + .tun_dev_attach_queue = selinux_tun_dev_attach_queue, .tun_dev_attach = selinux_tun_dev_attach, + .tun_dev_open = selinux_tun_dev_open, #ifdef CONFIG_SECURITY_NETWORK_XFRM .xfrm_policy_alloc_security = selinux_xfrm_policy_alloc, diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h index 26c7eee1c309..aa47bcabb5f6 100644 --- a/security/selinux/include/objsec.h +++ b/security/selinux/include/objsec.h @@ -110,6 +110,10 @@ struct sk_security_struct { u16 sclass; /* sock security class */ }; +struct tun_security_struct { + u32 sid; /* SID for the tun device sockets */ +}; + struct key_security_struct { u32 sid; /* SID of key */ }; -- cgit v1.2.3 From 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 Mon Sep 17 00:00:00 2001 From: Nithin Nayak Sujir Date: Mon, 14 Jan 2013 17:10:59 +0000 Subject: tg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 78ea90c40e19..d326d9219aa8 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6950,6 +6950,9 @@ static void tg3_poll_controller(struct net_device *dev) int i; struct tg3 *tp = netdev_priv(dev); + if (tg3_irq_sync(tp)) + return; + for (i = 0; i < tp->irq_cnt; i++) tg3_interrupt(tp->napi[i].irq_vec, &tp->napi[i]); } @@ -16367,6 +16370,7 @@ static int tg3_init_one(struct pci_dev *pdev, tp->pm_cap = pm_cap; tp->rx_mode = TG3_DEF_RX_MODE; tp->tx_mode = TG3_DEF_TX_MODE; + tp->irq_sync = 1; if (tg3_debug > 0) tp->msg_enable = tg3_debug; -- cgit v1.2.3 From daf3ec688e057f6060fb9bb0819feac7a8bbf45c Mon Sep 17 00:00:00 2001 From: Nithin Nayak Sujir Date: Mon, 14 Jan 2013 17:11:00 +0000 Subject: tg3: Fix crc errors on jumbo frame receive TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 58 ++++++++++++++++++++++--------------- 1 file changed, 35 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d326d9219aa8..bdb086934cd9 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1283,14 +1283,26 @@ static int tg3_phy_auxctl_write(struct tg3 *tp, int reg, u32 set) return tg3_writephy(tp, MII_TG3_AUX_CTRL, set | reg); } -#define TG3_PHY_AUXCTL_SMDSP_ENABLE(tp) \ - tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \ - MII_TG3_AUXCTL_ACTL_SMDSP_ENA | \ - MII_TG3_AUXCTL_ACTL_TX_6DB) +static int tg3_phy_toggle_auxctl_smdsp(struct tg3 *tp, bool enable) +{ + u32 val; + int err; + + err = tg3_phy_auxctl_read(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val); -#define TG3_PHY_AUXCTL_SMDSP_DISABLE(tp) \ - tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \ - MII_TG3_AUXCTL_ACTL_TX_6DB); + if (err) + return err; + if (enable) + + val |= MII_TG3_AUXCTL_ACTL_SMDSP_ENA; + else + val &= ~MII_TG3_AUXCTL_ACTL_SMDSP_ENA; + + err = tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, + val | MII_TG3_AUXCTL_ACTL_TX_6DB); + + return err; +} static int tg3_bmcr_reset(struct tg3 *tp) { @@ -2223,7 +2235,7 @@ static void tg3_phy_apply_otp(struct tg3 *tp) otp = tp->phy_otp; - if (TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) + if (tg3_phy_toggle_auxctl_smdsp(tp, true)) return; phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT); @@ -2248,7 +2260,7 @@ static void tg3_phy_apply_otp(struct tg3 *tp) ((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT); tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up) @@ -2284,9 +2296,9 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up) if (!tp->setlpicnt) { if (current_link_up == 1 && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, 0x0000); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } val = tr32(TG3_CPMU_EEE_MODE); @@ -2302,11 +2314,11 @@ static void tg3_phy_eee_enable(struct tg3 *tp) (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || tg3_flag(tp, 57765_CLASS)) && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { val = MII_TG3_DSP_TAP26_ALNOKO | MII_TG3_DSP_TAP26_RMRXSTO; tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, val); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } val = tr32(TG3_CPMU_EEE_MODE); @@ -2450,7 +2462,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_CTRL1000, CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER); - err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp); + err = tg3_phy_toggle_auxctl_smdsp(tp, true); if (err) return err; @@ -2471,7 +2483,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200); tg3_writephy(tp, MII_TG3_DSP_CONTROL, 0x0000); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); tg3_writephy(tp, MII_CTRL1000, phy9_orig); @@ -2572,10 +2584,10 @@ static int tg3_phy_reset(struct tg3 *tp) out: if ((tp->phy_flags & TG3_PHYFLG_ADC_BUG) && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, 0x201f, 0x2aaa); tg3_phydsp_write(tp, 0x000a, 0x0323); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } if (tp->phy_flags & TG3_PHYFLG_5704_A0_BUG) { @@ -2584,14 +2596,14 @@ out: } if (tp->phy_flags & TG3_PHYFLG_BER_BUG) { - if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + if (!tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, 0x000a, 0x310b); tg3_phydsp_write(tp, 0x201f, 0x9506); tg3_phydsp_write(tp, 0x401f, 0x14e2); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } } else if (tp->phy_flags & TG3_PHYFLG_JITTER_BUG) { - if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + if (!tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a); if (tp->phy_flags & TG3_PHYFLG_ADJUST_TRIM) { tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b); @@ -2600,7 +2612,7 @@ out: } else tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } } @@ -4009,7 +4021,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) tw32(TG3_CPMU_EEE_MODE, tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE); - err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp); + err = tg3_phy_toggle_auxctl_smdsp(tp, true); if (!err) { u32 err2; @@ -4042,7 +4054,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) MII_TG3_DSP_CH34TP2_HIBW01); } - err2 = TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + err2 = tg3_phy_toggle_auxctl_smdsp(tp, false); if (!err) err = err2; } -- cgit v1.2.3 From 86833f0a57c3d5f3ed8bba465369c15c831d3909 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Sat, 8 Dec 2012 09:04:25 +0000 Subject: ixgbe: only compile ixgbe_debugfs.o when enabled This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe driver to only compile the file when the config is enabled. This means we can remove the #ifdef inside the ixgbe_debugfs.c file. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/Makefile | 3 ++- drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c | 5 ----- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index f3a632bf8d96..687c83d1bdab 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o -ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o ixgbe_debugfs.o\ +ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o ixgbe_ptp.o @@ -40,4 +40,5 @@ ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o ixgbe-$(CONFIG_IXGBE_HWMON) += ixgbe_sysfs.o +ixgbe-$(CONFIG_DEBUG_FS) += ixgbe_debugfs.o ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c index 50aa546b8c7a..3504686d3af5 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c @@ -24,9 +24,6 @@ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ - -#ifdef CONFIG_DEBUG_FS - #include #include @@ -277,5 +274,3 @@ void ixgbe_dbg_exit(void) { debugfs_remove_recursive(ixgbe_dbg_root); } - -#endif /* CONFIG_DEBUG_FS */ -- cgit v1.2.3 From 20fc4c42b2bed2dffc8e51f24645603f05b2bcef Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 5 Dec 2012 07:53:38 +0000 Subject: ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for the UDP port to timestamp on was moved above the switch statement, but was overwritten to 0 if the ioctl selected one of the V1 filters. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 1a751c9d09c4..bb9256a1b0a9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -660,11 +660,11 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_SYNC_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG; break; case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: -- cgit v1.2.3 From c3e5d7181afb66657393066bccce0956fab09ab3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 9 Jan 2013 10:20:36 +0200 Subject: iwlwifi: audit single frames from AGG queue in RS The rate scaling won't treat the information in a frame with IEEE80211_TX_CTL_AMPDU set if IEEE80211_TX_STAT_AMPDU is cleared. But all the frames coming from an AGG tx queue have IEEE80211_TX_CTL_AMPDU set, and IEEE80211_TX_STAT_AMPDU is set only if the frame was sent in an AMPDU. This means that all the data in frames in AGG tx queues that aren't sent as an AMPDU is thrown away. This is even more harmful when in bad link conditions, the frames are sent in an AMPDU and then finally sent as single frame. So a lot of failures weren't reported and the rate scaling got stuck in high rates leading to very poor connectivity. Fix that by clearing IEEE80211_TX_CTL_AMPDU when the frame isn't part of an AMPDU. This bug was introduced by 2eb81a40aa521035ff9c8c8309e482dff523f8c9 iwlwifi: don't clear CTL_AMPDU on frame status This fix basically reverts the aforementioned commit. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index a790599fe2c2..31534f7c0548 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1079,6 +1079,8 @@ static void iwlagn_set_tx_status(struct iwl_priv *priv, { u16 status = le16_to_cpu(tx_resp->status.status); + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags |= iwl_tx_status_to_mac80211(status); iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), -- cgit v1.2.3 From 1626e0fa740dec8665a973cf2349405cdfeb46dc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Jan 2013 14:34:25 +0100 Subject: mac80211: fix FT roaming MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During FT roaming, wpa_supplicant attempts to set the key before association. This used to be rejected, but as a side effect of my commit 66e67e418908442389d3a9e ("mac80211: redesign auth/assoc") the key was accepted causing hardware crypto to not be used for it as the station isn't added to the driver yet. It would be possible to accept the key and then add it to the driver when the station has been added. However, this may run into issues with drivers using the state- based station adding if they accept the key only after association like it used to be. For now, revert to the behaviour from before the auth and assoc change. Cc: stable@vger.kernel.org Reported-by: Cédric Debarge Tested-by: Cédric Debarge Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 47e0aca614b7..516fbc96feff 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -164,7 +164,17 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, sta = sta_info_get(sdata, mac_addr); else sta = sta_info_get_bss(sdata, mac_addr); - if (!sta) { + /* + * The ASSOC test makes sure the driver is ready to + * receive the key. When wpa_supplicant has roamed + * using FT, it attempts to set the key before + * association has completed, this rejects that attempt + * so it will set the key again after assocation. + * + * TODO: accept the key if we have a station entry and + * add it to the device after the station. + */ + if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) { ieee80211_key_free(sdata->local, key); err = -ENOENT; goto out_unlock; -- cgit v1.2.3 From aacde9ee45225f7e0b90960f479aef83c66bfdc0 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 20 Dec 2012 14:41:18 +0100 Subject: mac80211: synchronize scan off/on-channel and PS states Since: commit b23b025fe246f3acc2988eb6d400df34c27cb8ae Author: Ben Greear Date: Fri Feb 4 11:54:17 2011 -0800 mac80211: Optimize scans on current operating channel. we do not disable PS while going back to operational channel (on ieee80211_scan_state_suspend) and deffer that until scan finish. But since we are allowed to send frames, we can send a frame to AP without PM bit set, so disable PS on AP side. Then when we switch to off-channel (in ieee80211_scan_state_resume) we do not enable PS. Hence we are off-channel with PS disabled, frames are not buffered by AP. To fix remove offchannel_ps_disable argument and always enable PS when going off-channel and disable it when going on-channel, like it was before. Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Tested-by: Seth Forshee Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 6 ++---- net/mac80211/offchannel.c | 19 +++++++------------ net/mac80211/scan.c | 15 +++++---------- 3 files changed, 14 insertions(+), 26 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8563b9a5cac3..2ed065c09562 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1358,10 +1358,8 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata); void ieee80211_sched_scan_stopped_work(struct work_struct *work); /* off-channel helpers */ -void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, - bool offchannel_ps_enable); -void ieee80211_offchannel_return(struct ieee80211_local *local, - bool offchannel_ps_disable); +void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local); +void ieee80211_offchannel_return(struct ieee80211_local *local); void ieee80211_roc_setup(struct ieee80211_local *local); void ieee80211_start_next_roc(struct ieee80211_local *local); void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index a5379aea7d09..a3ad4c3c80a3 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -102,8 +102,7 @@ static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata) ieee80211_sta_reset_conn_monitor(sdata); } -void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, - bool offchannel_ps_enable) +void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; @@ -134,8 +133,7 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { netif_tx_stop_all_queues(sdata->dev); - if (offchannel_ps_enable && - (sdata->vif.type == NL80211_IFTYPE_STATION) && + if (sdata->vif.type == NL80211_IFTYPE_STATION && sdata->u.mgd.associated) ieee80211_offchannel_ps_enable(sdata); } @@ -143,8 +141,7 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, mutex_unlock(&local->iflist_mtx); } -void ieee80211_offchannel_return(struct ieee80211_local *local, - bool offchannel_ps_disable) +void ieee80211_offchannel_return(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; @@ -163,11 +160,9 @@ void ieee80211_offchannel_return(struct ieee80211_local *local, continue; /* Tell AP we're back */ - if (offchannel_ps_disable && - sdata->vif.type == NL80211_IFTYPE_STATION) { - if (sdata->u.mgd.associated) - ieee80211_offchannel_ps_disable(sdata); - } + if (sdata->vif.type == NL80211_IFTYPE_STATION && + sdata->u.mgd.associated) + ieee80211_offchannel_ps_disable(sdata); if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { /* @@ -385,7 +380,7 @@ void ieee80211_sw_roc_work(struct work_struct *work) local->tmp_channel = NULL; ieee80211_hw_config(local, 0); - ieee80211_offchannel_return(local, true); + ieee80211_offchannel_return(local); } ieee80211_recalc_idle(local); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index d59fc6818b1c..bf82e69d0601 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -292,7 +292,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted, if (!was_hw_scan) { ieee80211_configure_filter(local); drv_sw_scan_complete(local); - ieee80211_offchannel_return(local, true); + ieee80211_offchannel_return(local); } ieee80211_recalc_idle(local); @@ -341,7 +341,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) local->next_scan_state = SCAN_DECISION; local->scan_channel_idx = 0; - ieee80211_offchannel_stop_vifs(local, true); + ieee80211_offchannel_stop_vifs(local); ieee80211_configure_filter(local); @@ -678,12 +678,8 @@ static void ieee80211_scan_state_suspend(struct ieee80211_local *local, local->scan_channel = NULL; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); - /* - * Re-enable vifs and beaconing. Leave PS - * in off-channel state..will put that back - * on-channel at the end of scanning. - */ - ieee80211_offchannel_return(local, false); + /* disable PS */ + ieee80211_offchannel_return(local); *next_delay = HZ / 5; /* afterwards, resume scan & go to next channel */ @@ -693,8 +689,7 @@ static void ieee80211_scan_state_suspend(struct ieee80211_local *local, static void ieee80211_scan_state_resume(struct ieee80211_local *local, unsigned long *next_delay) { - /* PS already is in off-channel mode */ - ieee80211_offchannel_stop_vifs(local, false); + ieee80211_offchannel_stop_vifs(local); if (local->ops->flush) { drv_flush(local, false); -- cgit v1.2.3 From b4a7ff75ba3545b061d4fe63f0bb9136ccfe8b19 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 13 Jan 2013 23:10:26 +0100 Subject: mac80211: fix monitor mode injection Channel contexts are not always used with monitor interfaces. If no channel context is set, use the oper channel, otherwise tx fails. Signed-off-by: Felix Fietkau [check local->use_chanctx] Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index e9eadc40c09c..467c1d1b66f2 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1673,10 +1673,13 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, chanctx_conf = rcu_dereference(tmp_sdata->vif.chanctx_conf); } - if (!chanctx_conf) - goto fail_rcu; - chan = chanctx_conf->def.chan; + if (chanctx_conf) + chan = chanctx_conf->def.chan; + else if (!local->use_chanctx) + chan = local->_oper_channel; + else + goto fail_rcu; /* * Frame injection is not allowed if beaconing is not allowed -- cgit v1.2.3 From adbbf69d1a54abf424e91875746a610dcc80017d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 16 Jan 2013 09:55:57 -0800 Subject: MAINTAINERS: Stephen Hemminger email change I changed my email because the vyatta.com mail server is now redirected to brocade.com; and the Brocade mail system is not friendly to Linux desktop users. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index cd5b31fec01c..256081678b85 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2966,7 +2966,7 @@ S: Maintained F: drivers/net/ethernet/i825xx/eexpress.* ETHERNET BRIDGE -M: Stephen Hemminger +M: Stephen Hemminger L: bridge@lists.linux-foundation.org L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net:Bridge @@ -4906,7 +4906,7 @@ S: Maintained MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2) M: Mirko Lindner -M: Stephen Hemminger +M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/marvell/sk* @@ -5181,7 +5181,7 @@ S: Supported F: drivers/infiniband/hw/nes/ NETEM NETWORK EMULATOR -M: Stephen Hemminger +M: Stephen Hemminger L: netem@lists.linux-foundation.org S: Maintained F: net/sched/sch_netem.c -- cgit v1.2.3 From d4fc9dc200acc339370e22a0578725e8fb45da0d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 15 Jan 2013 05:15:10 +0000 Subject: cxgb4: set coalesce parameters on all queues The coalesce parameters was set only on the first queue, which caused interrupt rates to be larger on all the other queues. This patch allows interrupt rates to be reduced for certain workloads and colaesce parameters by 41%. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: steved@us.ibm.com Cc: toml@us.ibm.com Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index f0718e1a8369..c306df7d4568 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -1994,9 +1994,20 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { const struct port_info *pi = netdev_priv(dev); struct adapter *adap = pi->adapter; - - return set_rxq_intr_params(adap, &adap->sge.ethrxq[pi->first_qset].rspq, - c->rx_coalesce_usecs, c->rx_max_coalesced_frames); + struct sge_rspq *q; + int i; + int r = 0; + + for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; i++) { + q = &adap->sge.ethrxq[i].rspq; + r = set_rxq_intr_params(adap, q, c->rx_coalesce_usecs, + c->rx_max_coalesced_frames); + if (r) { + dev_err(&dev->dev, "failed to set coalesce %d\n", r); + break; + } + } + return r; } static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) -- cgit v1.2.3 From 1b9c3a1bfbf17b5713bf7e6d74254e0c879ac4a0 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 14 Jan 2013 19:39:01 +0000 Subject: usbnet: dm9601: Fix incorrect command commit 24b1042c4eb2 ("usbnet: dm9601: apply introduced usb command APIs") removes the distiction between DM_WRITE_REG and DM_WRITE_REGS command. The distiction is reintroduced to the driver so that the functionality of the driver remains same. CC: Ming Lei Signed-off-by: Tushar Behera Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 3f554c1149f3..011410f39c90 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -53,7 +53,6 @@ #define DM_RX_OVERHEAD 7 /* 3 byte header + 4 byte crc tail */ #define DM_TIMEOUT 1000 - static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data) { int err; @@ -84,32 +83,23 @@ static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data) static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) { - return usbnet_write_cmd(dev, DM_WRITE_REGS, + return usbnet_write_cmd(dev, DM_WRITE_REG, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, reg, NULL, 0); } -static void dm_write_async_helper(struct usbnet *dev, u8 reg, u8 value, - u16 length, void *data) +static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) { usbnet_write_cmd_async(dev, DM_WRITE_REGS, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, reg, data, length); -} - -static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) -{ - netdev_dbg(dev->net, "dm_write_async() reg=0x%02x length=%d\n", reg, length); - - dm_write_async_helper(dev, reg, 0, length, data); + 0, reg, data, length); } static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value) { - netdev_dbg(dev->net, "dm_write_reg_async() reg=0x%02x value=0x%02x\n", - reg, value); - - dm_write_async_helper(dev, reg, value, 0, NULL); + usbnet_write_cmd_async(dev, DM_WRITE_REG, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, reg, NULL, 0); } static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *value) -- cgit v1.2.3 From 3022551b6ae6d4750becc0a8e3391d4b79d5a038 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 14 Jan 2013 23:19:50 +0000 Subject: net: qmi_wwan: add TP-LINK HSUPA Modem MA180 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 The "Networkcard" function has been verified to support these QMI services: ctl (1.3) wds (1.3) dms (1.2) nas (1.0) Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 6a1ca500e612..c4341085e5c7 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -459,6 +459,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ + {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v1.2.3 From 9cbbffe2ded494429b0d005a51a88242bd9b3095 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 9 Jan 2013 12:34:55 -0500 Subject: mac80211: set NEED_TXPROCESSING for PERR frames A user reported warnings in ath5k due to transmitting frames with no rates set up. The frames were Mesh PERR frames, and some debugging showed an empty control block with just the vif pointer: > [ 562.522682] XXX txinfo: 00000000: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ > [ 562.522688] XXX txinfo: 00000010: 00 00 00 00 00 00 00 00 54 b8 f2 > db 00 00 00 00 ........T....... > [ 562.522693] XXX txinfo: 00000020: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ Set the IEEE80211_TX_INTFL_NEED_TXPROCESSING flag to ensure that rate control gets run before the frame is sent. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 47aeee2d8db1..40b390581b01 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -215,6 +215,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, skb->priority = 7; info->control.vif = &sdata->vif; + info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; ieee80211_set_qos_hdr(sdata, skb); } -- cgit v1.2.3 From 8680451f38a64bd270233b3c0eeb7c45f2b5efe3 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 9 Jan 2013 12:34:56 -0500 Subject: mac80211: add encrypt headroom to PERR frames Mesh PERR action frames are robust and thus may be encrypted, so add proper head/tailroom to allow this. Fixes this warning when operating a Mesh STA on ath5k: WARNING: at net/mac80211/wpa.c:427 ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211]() Call Trace: [] warn_slowpath_common+0x63/0x78 [] warn_slowpath_null+0xf/0x13 [] ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211] [] ieee80211_crypto_ccmp_encrypt+0x1f/0x37 [mac80211] [] invoke_tx_handlers+0xcad/0x10bd [mac80211] [] ieee80211_tx+0x87/0xb3 [mac80211] [] ieee80211_tx_pending+0xcc/0x170 [mac80211] [] tasklet_action+0x3e/0x65 Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 40b390581b01..2659e428b80c 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -247,11 +247,13 @@ int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, return -EAGAIN; skb = dev_alloc_skb(local->tx_headroom + + IEEE80211_ENCRYPT_HEADROOM + + IEEE80211_ENCRYPT_TAILROOM + hdr_len + 2 + 15 /* PERR IE */); if (!skb) return -1; - skb_reserve(skb, local->tx_headroom); + skb_reserve(skb, local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM); mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); memset(mgmt, 0, hdr_len); mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | -- cgit v1.2.3 From 7efdba5bd9a2f3e2059beeb45c9fa55eefe1bced Mon Sep 17 00:00:00 2001 From: Romain KUNTZ Date: Wed, 16 Jan 2013 12:47:40 +0000 Subject: ipv6: fix header length calculation in ip6_append_data() Commit 299b0767 (ipv6: Fix IPsec slowpath fragmentation problem) has introduced a error in the header length calculation that provokes corrupted packets when non-fragmentable extensions headers (Destination Option or Routing Header Type 2) are used. rt->rt6i_nfheader_len is the length of the non-fragmentable extension header, and it should be substracted to rt->dst.header_len, and not to exthdrlen, as it was done before commit 299b0767. This patch reverts to the original and correct behavior. It has been successfully tested with and without IPsec on packets that include non-fragmentable extensions headers. Signed-off-by: Romain Kuntz Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 5552d13ae92f..0c7c03d50dc0 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1213,10 +1213,10 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, if (dst_allfrag(rt->dst.path)) cork->flags |= IPCORK_ALLFRAG; cork->length = 0; - exthdrlen = (opt ? opt->opt_flen : 0) - rt->rt6i_nfheader_len; + exthdrlen = (opt ? opt->opt_flen : 0); length += exthdrlen; transhdrlen += exthdrlen; - dst_exthdrlen = rt->dst.header_len; + dst_exthdrlen = rt->dst.header_len - rt->rt6i_nfheader_len; } else { rt = (struct rt6_info *)cork->dst; fl6 = &inet->cork.fl.u.ip6; -- cgit v1.2.3 From 38d523e2948162776903349c89d65f7b9370dadb Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 16 Jan 2013 20:55:01 +0000 Subject: ipv4: Remove output route check in ipv4_mtu MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The output route check was introduced with git commit 261663b0 (ipv4: Don't use the cached pmtu informations for input routes) during times when we cached the pmtu informations on the inetpeer. Now the pmtu informations are back in the routes, so this check is obsolete. It also had some unwanted side effects, as reported by Timo Teras and Lukas Tribus. Signed-off-by: Steffen Klassert Acked-by: Timo Teräs Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 844a9ef60dbd..6e4a89c5e27e 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1120,7 +1120,7 @@ static unsigned int ipv4_mtu(const struct dst_entry *dst) if (!mtu || time_after_eq(jiffies, rt->dst.expires)) mtu = dst_metric_raw(dst, RTAX_MTU); - if (mtu && rt_is_output_route(rt)) + if (mtu) return mtu; mtu = dst->dev->mtu; -- cgit v1.2.3 From fa1e492aa3cbafba9f8fc6d05e5b08a3091daf4a Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 16 Jan 2013 20:58:10 +0000 Subject: ipv4: Don't update the pmtu on mtu locked routes Routes with locked mtu should not use learned pmtu informations, so do not update the pmtu on these routes. Reported-by: Julian Anastasov Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/route.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 6e4a89c5e27e..259cbeee9a8b 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -912,6 +912,9 @@ static void __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu) struct dst_entry *dst = &rt->dst; struct fib_result res; + if (dst_metric_locked(dst, RTAX_MTU)) + return; + if (dst->dev->mtu < mtu) return; -- cgit v1.2.3 From 13b6d2e6c25dd33f94873b771ad7de3550da5125 Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Thu, 17 Jan 2013 07:18:29 +0000 Subject: 3c574_cs: fix operator precedence between << and & The code to print the FIFO size in tc574_config computes it as: 8 << config & Ram_size which evaluates the '<<' first, but the actual intent is to evaluate the '&' first. Add parentheses to enforce desired evaluation order. Signed-off-by: Nickolai Zeldovich Signed-off-by: David S. Miller --- drivers/net/ethernet/3com/3c574_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c index 66df93638085..ffd8de28a76a 100644 --- a/drivers/net/ethernet/3com/3c574_cs.c +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -432,7 +432,7 @@ static int tc574_config(struct pcmcia_device *link) netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n", cardname, dev->base_addr, dev->irq, dev->dev_addr); netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n", - 8 << config & Ram_size, + 8 << (config & Ram_size), ram_split[(config & Ram_split) >> Ram_split_shift], config & Autoselect ? "autoselect " : ""); -- cgit v1.2.3 From c3745ead19ad148c57f606a0dbaee1d21214f3f7 Mon Sep 17 00:00:00 2001 From: Stef van Os Date: Thu, 17 Jan 2013 16:36:18 +0100 Subject: phy/marvell: remove fiber/copper autoselect on 88e1111 Remove the code that always enables copper/fiber autoselect, ignoring the DIS_FC strapping pin. The default value for this register is autoselect on anyway, and if you explicitly disable autoselect via strapping you probably really don't want autoselect. Signed-off-by: Stef van Os Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 5d2a3f215887..22dec9c7ef05 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -353,15 +353,6 @@ static int m88e1111_config_init(struct phy_device *phydev) int err; int temp; - /* Enable Fiber/Copper auto selection */ - temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); - temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO; - phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); - - temp = phy_read(phydev, MII_BMCR); - temp |= BMCR_RESET; - phy_write(phydev, MII_BMCR, temp); - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || -- cgit v1.2.3 From 01fe944f1024bd4e5c327ddbe8d657656b66af2f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 17 Jan 2013 13:30:49 -0800 Subject: macvlan: fix macvlan_get_size() commit df8ef8f3aaa (macvlan: add FDB bridge ops and macvlan flags) forgot to update macvlan_get_size() after the addition of IFLA_MACVLAN_FLAGS Signed-off-by: Eric Dumazet Cc: John Fastabend Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 68a43fe602e7..d3fb97d97cbc 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -822,7 +822,10 @@ static int macvlan_changelink(struct net_device *dev, static size_t macvlan_get_size(const struct net_device *dev) { - return nla_total_size(4); + return (0 + + nla_total_size(4) /* IFLA_MACVLAN_MODE */ + + nla_total_size(2) /* IFLA_MACVLAN_FLAGS */ + ); } static int macvlan_fill_info(struct sk_buff *skb, -- cgit v1.2.3 From 2f94aabd9f6c925d77aecb3ff020f1cc12ed8f86 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 17 Jan 2013 11:15:08 +0000 Subject: sctp: refactor sctp_outq_teardown to insure proper re-initalization Jamie Parsons reported a problem recently, in which the re-initalization of an association (The duplicate init case), resulted in a loss of receive window space. He tracked down the root cause to sctp_outq_teardown, which discarded all the data on an outq during a re-initalization of the corresponding association, but never reset the outq->outstanding_data field to zero. I wrote, and he tested this fix, which does a proper full re-initalization of the outq, fixing this problem, and hopefully future proofing us from simmilar issues down the road. Signed-off-by: Neil Horman Reported-by: Jamie Parsons Tested-by: Jamie Parsons CC: Jamie Parsons CC: Vlad Yasevich CC: "David S. Miller" CC: netdev@vger.kernel.org Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/outqueue.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 379c81dee9d1..9bcdbd02d777 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -224,7 +224,7 @@ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q) /* Free the outqueue structure and any related pending chunks. */ -void sctp_outq_teardown(struct sctp_outq *q) +static void __sctp_outq_teardown(struct sctp_outq *q) { struct sctp_transport *transport; struct list_head *lchunk, *temp; @@ -277,8 +277,6 @@ void sctp_outq_teardown(struct sctp_outq *q) sctp_chunk_free(chunk); } - q->error = 0; - /* Throw away any leftover control chunks. */ list_for_each_entry_safe(chunk, tmp, &q->control_chunk_list, list) { list_del_init(&chunk->list); @@ -286,11 +284,17 @@ void sctp_outq_teardown(struct sctp_outq *q) } } +void sctp_outq_teardown(struct sctp_outq *q) +{ + __sctp_outq_teardown(q); + sctp_outq_init(q->asoc, q); +} + /* Free the outqueue structure and any related pending chunks. */ void sctp_outq_free(struct sctp_outq *q) { /* Throw away leftover chunks. */ - sctp_outq_teardown(q); + __sctp_outq_teardown(q); /* If we were kmalloc()'d, free the memory. */ if (q->malloced) -- cgit v1.2.3 From e2f6725917ed525f4111c33c31ab53397b70f9d2 Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Thu, 17 Jan 2013 13:58:28 -0500 Subject: net/xfrm/xfrm_replay: avoid division by zero All of the xfrm_replay->advance functions in xfrm_replay.c check if x->replay_esn->replay_window is zero (and return if so). However, one of them, xfrm_replay_advance_bmp(), divides by that value (in the '%' operator) before doing the check, which can potentially trigger a divide-by-zero exception. Some compilers will also assume that the earlier division means the value cannot be zero later, and thus will eliminate the subsequent zero check as dead code. This patch moves the division to after the check. Signed-off-by: Nickolai Zeldovich Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_replay.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index 765f6fe951eb..35754cc8a9e5 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -242,11 +242,13 @@ static void xfrm_replay_advance_bmp(struct xfrm_state *x, __be32 net_seq) u32 diff; struct xfrm_replay_state_esn *replay_esn = x->replay_esn; u32 seq = ntohl(net_seq); - u32 pos = (replay_esn->seq - 1) % replay_esn->replay_window; + u32 pos; if (!replay_esn->replay_window) return; + pos = (replay_esn->seq - 1) % replay_esn->replay_window; + if (seq > replay_esn->seq) { diff = seq - replay_esn->seq; -- cgit v1.2.3 From d6fb3be544b46a7611a3373fcaa62b5b0be01888 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 16 Jan 2013 13:36:37 +0000 Subject: net: calxedaxgmac: throw away overrun frames The xgmac driver assumes 1 frame per descriptor. If a frame larger than the descriptor's buffer size is received, the frame will spill over into the next descriptor. So check for received frames that span more than one descriptor and discard them. This prevents a crash if we receive erroneous large packets. Signed-off-by: Rob Herring Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index b407043ce9b0..f7f02900f650 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -548,6 +548,10 @@ static int desc_get_rx_status(struct xgmac_priv *priv, struct xgmac_dma_desc *p) return -1; } + /* All frames should fit into a single buffer */ + if (!(status & RXDESC_FIRST_SEG) || !(status & RXDESC_LAST_SEG)) + return -1; + /* Check if packet has checksum already */ if ((status & RXDESC_FRAME_TYPE) && (status & RXDESC_EXT_STATUS) && !(ext_status & RXDESC_IP_PAYLOAD_MASK)) -- cgit v1.2.3 From 6f809da27c94425e07be4a64d5093e1df95188e9 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 16 Jan 2013 22:09:49 +0000 Subject: ipv6: Add an error handler for icmp6 pmtu and redirect events are now handled in the protocols error handler, so add an error handler for icmp6 to do this. It is needed in the case when we have no socket context. Based on a patch by Duan Jiong. Reported-by: Duan Jiong Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv6/icmp.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index b4a9fd51dae7..fff5bdd8b680 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -81,10 +81,22 @@ static inline struct sock *icmpv6_sk(struct net *net) return net->ipv6.icmp_sk[smp_processor_id()]; } +static void icmpv6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, + u8 type, u8 code, int offset, __be32 info) +{ + struct net *net = dev_net(skb->dev); + + if (type == ICMPV6_PKT_TOOBIG) + ip6_update_pmtu(skb, net, info, 0, 0); + else if (type == NDISC_REDIRECT) + ip6_redirect(skb, net, 0, 0); +} + static int icmpv6_rcv(struct sk_buff *skb); static const struct inet6_protocol icmpv6_protocol = { .handler = icmpv6_rcv, + .err_handler = icmpv6_err, .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL, }; -- cgit v1.2.3 From 213815a1e6ae70b9648483b110bc5081795f99e8 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 17 Jan 2013 05:30:42 +0000 Subject: net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV mode Commit 5b4c4d36860e "mlx4_en: Allow communication between functions on same host" introduced a regression under which a bridge acting as vSwitch whose uplink is an mlx4 Ethernet device become non-operative in native (non sriov) mode. This happens since broadcast ARP requests sent by VMs were loopback-ed by the HW and hence the bridge learned VM source MACs on both the VM and the uplink ports. The fix is to place the DMAC in the send WQE only under SRIOV/eSwitch configuration or when the device is in selftest. Reviewed-by: Or Gerlitz Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 2b799f4f1c37..6771b69f40d5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -630,10 +630,15 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->tx_csum++; } - /* Copy dst mac address to wqe */ - ethh = (struct ethhdr *)skb->data; - tx_desc->ctrl.srcrb_flags16[0] = get_unaligned((__be16 *)ethh->h_dest); - tx_desc->ctrl.imm = get_unaligned((__be32 *)(ethh->h_dest + 2)); + if (mlx4_is_mfunc(mdev->dev) || priv->validate_loopback) { + /* Copy dst mac address to wqe. This allows loopback in eSwitch, + * so that VFs and PF can communicate with each other + */ + ethh = (struct ethhdr *)skb->data; + tx_desc->ctrl.srcrb_flags16[0] = get_unaligned((__be16 *)ethh->h_dest); + tx_desc->ctrl.imm = get_unaligned((__be32 *)(ethh->h_dest + 2)); + } + /* Handle LSO (TSO) packets */ if (lso_header_size) { /* Mark opcode as LSO */ -- cgit v1.2.3 From ca4c7b35f75492de7fbf5ee95be07481c348caee Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 17 Jan 2013 05:30:43 +0000 Subject: net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaults The lines if (mlx4_is_mfunc(dev)) { nreq = 2; } else { which hard code the number of requested msi-x vectors under multi-function mode to two can be removed completely, since the firmware sets num_eqs and reserved_eqs appropriately Thus, the code line: nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, nreq); is by itself sufficient and correct for all cases. Currently, for mfunc mode num_eqs = 32 and reserved_eqs = 28, hence four vectors will be enabled. This triples (one vector is used for the async events and commands EQ) the horse power provided for processing of incoming packets on netdev RSS scheme, IO initiators/targets commands processing flows, etc. Reviewed-by: Jack Morgenstein Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index e1bafffbc3b1..a6542d75374c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1790,15 +1790,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev) int i; if (msi_x) { - /* In multifunction mode each function gets 2 msi-X vectors - * one for data path completions anf the other for asynch events - * or command completions */ - if (mlx4_is_mfunc(dev)) { - nreq = 2; - } else { - nreq = min_t(int, dev->caps.num_eqs - - dev->caps.reserved_eqs, nreq); - } + nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, + nreq); entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL); if (!entries) -- cgit v1.2.3 From c1acd7090f67471998edd1d036003fcba2c1b419 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 18 Jan 2013 04:26:34 +0000 Subject: net: qmi_wwan: add ONDA MT8205 4G LTE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index c4341085e5c7..575a5839ee34 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -433,6 +433,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */ + {QMI_FIXED_INTF(0x19d2, 0x0265, 4)}, /* ONDA MT8205 4G LTE */ {QMI_FIXED_INTF(0x19d2, 0x0284, 4)}, /* ZTE MF880 */ {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ -- cgit v1.2.3 From 9a4c831ebbc1bf7cb41079e421a74bddd508f251 Mon Sep 17 00:00:00 2001 From: Jianjun Kong Date: Fri, 18 Jan 2013 16:52:09 +0000 Subject: net/hyperv: fix wrong length of mac address This patch fixed wrong mac length, it should be ETH_ALEN, also replaced the hardcode 6 in hyperv_net.h Signed-off-by: Amos Kong Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 2 +- drivers/net/hyperv/netvsc_drv.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 5fd6f4674326..e6fe0d80d612 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -84,7 +84,7 @@ struct hv_netvsc_packet { }; struct netvsc_device_info { - unsigned char mac_adr[6]; + unsigned char mac_adr[ETH_ALEN]; bool link_state; /* 0 - link up, 1 - link down */ int ring_size; }; diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index f825a629a699..8264f0ef7692 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -349,7 +349,7 @@ static int netvsc_set_mac_addr(struct net_device *ndev, void *p) struct net_device_context *ndevctx = netdev_priv(ndev); struct hv_device *hdev = ndevctx->device_ctx; struct sockaddr *addr = p; - char save_adr[14]; + char save_adr[ETH_ALEN]; unsigned char save_aatype; int err; -- cgit v1.2.3 From b74aa930ef49a3c0d8e4c1987f89decac768fb2c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 19 Jan 2013 16:10:37 +0000 Subject: tcp: fix incorrect LOCKDROPPEDICMPS counter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 563d34d057 (tcp: dont drop MTU reduction indications) added an error leading to incorrect accounting of LINUX_MIB_LOCKDROPPEDICMPS If socket is owned by the user, we want to increment this SNMP counter, unless the message is a (ICMP_DEST_UNREACH,ICMP_FRAG_NEEDED) one. Reported-by: Maciej Żenczykowski Signed-off-by: Eric Dumazet Cc: Neal Cardwell Signed-off-by: Maciej Żenczykowski Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 54139fa514e6..70b09ef2463b 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -369,11 +369,10 @@ void tcp_v4_err(struct sk_buff *icmp_skb, u32 info) * We do take care of PMTU discovery (RFC1191) special case : * we can receive locally generated ICMP messages while socket is held. */ - if (sock_owned_by_user(sk) && - type != ICMP_DEST_UNREACH && - code != ICMP_FRAG_NEEDED) - NET_INC_STATS_BH(net, LINUX_MIB_LOCKDROPPEDICMPS); - + if (sock_owned_by_user(sk)) { + if (!(type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED)) + NET_INC_STATS_BH(net, LINUX_MIB_LOCKDROPPEDICMPS); + } if (sk->sk_state == TCP_CLOSE) goto out; -- cgit v1.2.3 From 82bda6195615891181115f579a480aa5001ce7e9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 5 Jan 2013 21:31:18 +0000 Subject: net: splice: avoid high order page splitting splice() can handle pages of any order, but network code tries hard to split them in PAGE_SIZE units. Not quite successfully anyway, as __splice_segment() assumed poff < PAGE_SIZE. This is true for the skb->data part, not necessarily for the fragments. This patch removes this logic to give the pages as they are in the skb. Signed-off-by: Eric Dumazet Cc: Willy Tarreau Signed-off-by: David S. Miller --- net/core/skbuff.c | 38 +++++++++----------------------------- 1 file changed, 9 insertions(+), 29 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 3ab989b0de42..f5dfdf7727c4 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1706,20 +1706,6 @@ static bool spd_fill_page(struct splice_pipe_desc *spd, return false; } -static inline void __segment_seek(struct page **page, unsigned int *poff, - unsigned int *plen, unsigned int off) -{ - unsigned long n; - - *poff += off; - n = *poff / PAGE_SIZE; - if (n) - *page = nth_page(*page, n); - - *poff = *poff % PAGE_SIZE; - *plen -= off; -} - static bool __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, @@ -1727,6 +1713,8 @@ static bool __splice_segment(struct page *page, unsigned int poff, struct sock *sk, struct pipe_inode_info *pipe) { + unsigned int flen; + if (!*len) return true; @@ -1737,24 +1725,16 @@ static bool __splice_segment(struct page *page, unsigned int poff, } /* ignore any bits we already processed */ - if (*off) { - __segment_seek(&page, &poff, &plen, *off); - *off = 0; - } - - do { - unsigned int flen = min(*len, plen); + poff += *off; + plen -= *off; + *off = 0; - /* the linear region may spread across several pages */ - flen = min_t(unsigned int, flen, PAGE_SIZE - poff); + flen = min(*len, plen); - if (spd_fill_page(spd, pipe, page, &flen, poff, skb, linear, sk)) - return true; - - __segment_seek(&page, &poff, &plen, flen); - *len -= flen; + if (spd_fill_page(spd, pipe, page, &flen, poff, skb, linear, sk)) + return true; - } while (*len && plen); + *len -= flen; return false; } -- cgit v1.2.3 From bc9540c637c3d8712ccbf9dcf28621f380ed5e64 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 11 Jan 2013 14:46:37 +0000 Subject: net: splice: fix __splice_segment() commit 9ca1b22d6d2 (net: splice: avoid high order page splitting) forgot that skb->head could need a copy into several page frags. This could be the case for loopback traffic mostly. Also remove now useless skb argument from linear_to_page() and __splice_segment() prototypes. Signed-off-by: Eric Dumazet Cc: Willy Tarreau Signed-off-by: David S. Miller --- net/core/skbuff.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index f5dfdf7727c4..a9a2ae3e2213 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1649,7 +1649,7 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) static struct page *linear_to_page(struct page *page, unsigned int *len, unsigned int *offset, - struct sk_buff *skb, struct sock *sk) + struct sock *sk) { struct page_frag *pfrag = sk_page_frag(sk); @@ -1682,14 +1682,14 @@ static bool spd_can_coalesce(const struct splice_pipe_desc *spd, static bool spd_fill_page(struct splice_pipe_desc *spd, struct pipe_inode_info *pipe, struct page *page, unsigned int *len, unsigned int offset, - struct sk_buff *skb, bool linear, + bool linear, struct sock *sk) { if (unlikely(spd->nr_pages == MAX_SKB_FRAGS)) return true; if (linear) { - page = linear_to_page(page, len, &offset, skb, sk); + page = linear_to_page(page, len, &offset, sk); if (!page) return true; } @@ -1708,13 +1708,11 @@ static bool spd_fill_page(struct splice_pipe_desc *spd, static bool __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, - unsigned int *len, struct sk_buff *skb, + unsigned int *len, struct splice_pipe_desc *spd, bool linear, struct sock *sk, struct pipe_inode_info *pipe) { - unsigned int flen; - if (!*len) return true; @@ -1729,12 +1727,16 @@ static bool __splice_segment(struct page *page, unsigned int poff, plen -= *off; *off = 0; - flen = min(*len, plen); - - if (spd_fill_page(spd, pipe, page, &flen, poff, skb, linear, sk)) - return true; + do { + unsigned int flen = min(*len, plen); - *len -= flen; + if (spd_fill_page(spd, pipe, page, &flen, poff, + linear, sk)) + return true; + poff += flen; + plen -= flen; + *len -= flen; + } while (*len && plen); return false; } @@ -1757,7 +1759,7 @@ static bool __skb_splice_bits(struct sk_buff *skb, struct pipe_inode_info *pipe, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd, + offset, len, spd, skb_head_is_locked(skb), sk, pipe)) return true; @@ -1770,7 +1772,7 @@ static bool __skb_splice_bits(struct sk_buff *skb, struct pipe_inode_info *pipe, if (__splice_segment(skb_frag_page(f), f->page_offset, skb_frag_size(f), - offset, len, skb, spd, false, sk, pipe)) + offset, len, spd, false, sk, pipe)) return true; } -- cgit v1.2.3 From 5b653b2a1c3b5634368fde2df958a1398481e580 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Fri, 18 Jan 2013 16:03:48 +0100 Subject: xfrm: fix freed block size calculation in xfrm_policy_fini() Missing multiplication of block size by sizeof(struct hlist_head) can cause xfrm_hash_free() to be called with wrong second argument so that kfree() is called on a block allocated with vzalloc() or __get_free_pages() or free_pages() is called with wrong order when a namespace with enough policies is removed. Bug introduced by commit a35f6c5d, i.e. versions >= 2.6.29 are affected. Signed-off-by: Michal Kubecek Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 41eabc46f110..07c585756d2a 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2656,7 +2656,7 @@ static void xfrm_policy_fini(struct net *net) WARN_ON(!hlist_empty(&net->xfrm.policy_inexact[dir])); htab = &net->xfrm.policy_bydst[dir]; - sz = (htab->hmask + 1); + sz = (htab->hmask + 1) * sizeof(struct hlist_head); WARN_ON(!hlist_empty(htab->table)); xfrm_hash_free(htab->table, sz); } -- cgit v1.2.3 From 05ab86c55683410593720003442dde629782aaac Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 15 Jan 2013 13:38:53 +0100 Subject: xfrm4: Invalidate all ipv4 routes on IPsec pmtu events On IPsec pmtu events we can't access the transport headers of the original packet, so we can't find the socket that sent the packet. The only chance to notify the socket about the pmtu change is to force a relookup for all routes. This patch implenents this for the IPsec protocols. Signed-off-by: Steffen Klassert --- net/ipv4/ah4.c | 7 +++++-- net/ipv4/esp4.c | 7 +++++-- net/ipv4/ipcomp.c | 7 +++++-- 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index a154d0a08c79..a69b4e4a02b5 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -420,9 +420,12 @@ static void ah4_err(struct sk_buff *skb, u32 info) if (!x) return; - if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH) + if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH) { + atomic_inc(&flow_cache_genid); + rt_genid_bump(net); + ipv4_update_pmtu(skb, net, info, 0, 0, IPPROTO_AH, 0); - else + } else ipv4_redirect(skb, net, 0, 0, IPPROTO_AH, 0); xfrm_state_put(x); } diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index fd26ff4f3eac..3b4f0cd2e63e 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -502,9 +502,12 @@ static void esp4_err(struct sk_buff *skb, u32 info) if (!x) return; - if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH) + if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH) { + atomic_inc(&flow_cache_genid); + rt_genid_bump(net); + ipv4_update_pmtu(skb, net, info, 0, 0, IPPROTO_ESP, 0); - else + } else ipv4_redirect(skb, net, 0, 0, IPPROTO_ESP, 0); xfrm_state_put(x); } diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index d3ab47e19a89..9a46daed2f3c 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -47,9 +47,12 @@ static void ipcomp4_err(struct sk_buff *skb, u32 info) if (!x) return; - if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH) + if (icmp_hdr(skb)->type == ICMP_DEST_UNREACH) { + atomic_inc(&flow_cache_genid); + rt_genid_bump(net); + ipv4_update_pmtu(skb, net, info, 0, 0, IPPROTO_COMP, 0); - else + } else ipv4_redirect(skb, net, 0, 0, IPPROTO_COMP, 0); xfrm_state_put(x); } -- cgit v1.2.3 From 9cb3a50c5f63ed745702972f66eaee8767659acd Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 21 Jan 2013 01:59:11 +0000 Subject: ipv4: Invalidate the socket cached route on pmtu events if possible The route lookup in ipv4_sk_update_pmtu() might return a route different from the route we cached at the socket. This is because standart routes are per cpu, so each cpu has it's own struct rtable. This means that we do not invalidate the socket cached route if the NET_RX_SOFTIRQ is not served by the same cpu that the sending socket uses. As a result, the cached route reused until we disconnect. With this patch we invalidate the socket cached route if possible. If the socket is owened by the user, we can't update the cached route directly. A followup patch will implement socket release callback functions for datagram sockets to handle this case. Reported-by: Yurij M. Plotnikov Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/route.c | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 259cbeee9a8b..132737a7c83a 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -965,7 +965,7 @@ void ipv4_update_pmtu(struct sk_buff *skb, struct net *net, u32 mtu, } EXPORT_SYMBOL_GPL(ipv4_update_pmtu); -void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) +static void __ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) { const struct iphdr *iph = (const struct iphdr *) skb->data; struct flowi4 fl4; @@ -978,6 +978,46 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) ip_rt_put(rt); } } + +void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) +{ + const struct iphdr *iph = (const struct iphdr *) skb->data; + struct flowi4 fl4; + struct rtable *rt; + struct dst_entry *dst; + + bh_lock_sock(sk); + rt = (struct rtable *) __sk_dst_get(sk); + + if (sock_owned_by_user(sk) || !rt) { + __ipv4_sk_update_pmtu(skb, sk, mtu); + goto out; + } + + __build_flow_key(&fl4, sk, iph, 0, 0, 0, 0, 0); + + if (!__sk_dst_check(sk, 0)) { + rt = ip_route_output_flow(sock_net(sk), &fl4, sk); + if (IS_ERR(rt)) + goto out; + } + + __ip_rt_update_pmtu((struct rtable *) rt->dst.path, &fl4, mtu); + + dst = dst_check(&rt->dst, 0); + if (!dst) { + rt = ip_route_output_flow(sock_net(sk), &fl4, sk); + if (IS_ERR(rt)) + goto out; + + dst = &rt->dst; + } + + __sk_dst_set(sk, dst); + +out: + bh_unlock_sock(sk); +} EXPORT_SYMBOL_GPL(ipv4_sk_update_pmtu); void ipv4_redirect(struct sk_buff *skb, struct net *net, -- cgit v1.2.3 From 8141ed9fcedb278f4a3a78680591bef1e55f75fb Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 21 Jan 2013 02:00:03 +0000 Subject: ipv4: Add a socket release callback for datagram sockets This implements a socket release callback function to check if the socket cached route got invalid during the time we owned the socket. The function is used from udp, raw and ping sockets. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- include/net/ip.h | 2 ++ net/ipv4/datagram.c | 25 +++++++++++++++++++++++++ net/ipv4/ping.c | 1 + net/ipv4/raw.c | 1 + net/ipv4/udp.c | 1 + 5 files changed, 30 insertions(+) diff --git a/include/net/ip.h b/include/net/ip.h index 0707fb9551aa..a68f838a132c 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -143,6 +143,8 @@ static inline struct sk_buff *ip_finish_skb(struct sock *sk, struct flowi4 *fl4) extern int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); +extern void ip4_datagram_release_cb(struct sock *sk); + struct ip_reply_arg { struct kvec iov[1]; int flags; diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c index 424fafbc8cb0..b28e863fe0a7 100644 --- a/net/ipv4/datagram.c +++ b/net/ipv4/datagram.c @@ -85,3 +85,28 @@ out: return err; } EXPORT_SYMBOL(ip4_datagram_connect); + +void ip4_datagram_release_cb(struct sock *sk) +{ + const struct inet_sock *inet = inet_sk(sk); + const struct ip_options_rcu *inet_opt; + __be32 daddr = inet->inet_daddr; + struct flowi4 fl4; + struct rtable *rt; + + if (! __sk_dst_get(sk) || __sk_dst_check(sk, 0)) + return; + + rcu_read_lock(); + inet_opt = rcu_dereference(inet->inet_opt); + if (inet_opt && inet_opt->opt.srr) + daddr = inet_opt->opt.faddr; + rt = ip_route_output_ports(sock_net(sk), &fl4, sk, daddr, + inet->inet_saddr, inet->inet_dport, + inet->inet_sport, sk->sk_protocol, + RT_CONN_FLAGS(sk), sk->sk_bound_dev_if); + if (!IS_ERR(rt)) + __sk_dst_set(sk, &rt->dst); + rcu_read_unlock(); +} +EXPORT_SYMBOL_GPL(ip4_datagram_release_cb); diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 8f3d05424a3e..6f9c07268cf6 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -738,6 +738,7 @@ struct proto ping_prot = { .recvmsg = ping_recvmsg, .bind = ping_bind, .backlog_rcv = ping_queue_rcv_skb, + .release_cb = ip4_datagram_release_cb, .hash = ping_v4_hash, .unhash = ping_v4_unhash, .get_port = ping_v4_get_port, diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 73d1e4df4bf6..6f08991409c3 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -894,6 +894,7 @@ struct proto raw_prot = { .recvmsg = raw_recvmsg, .bind = raw_bind, .backlog_rcv = raw_rcv_skb, + .release_cb = ip4_datagram_release_cb, .hash = raw_hash_sk, .unhash = raw_unhash_sk, .obj_size = sizeof(struct raw_sock), diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 79c8dbe59b54..1f4d405eafba 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1952,6 +1952,7 @@ struct proto udp_prot = { .recvmsg = udp_recvmsg, .sendpage = udp_sendpage, .backlog_rcv = __udp_queue_rcv_skb, + .release_cb = ip4_datagram_release_cb, .hash = udp_lib_hash, .unhash = udp_lib_unhash, .rehash = udp_v4_rehash, -- cgit v1.2.3 From 9992c2e2fbb72ffc63d4587c4aa94dfcd8229e55 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 21 Jan 2013 05:50:38 +0000 Subject: net: cdc_ncm: workaround for missing CDC Union MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding support for the MBIM mode in some Sierra Wireless devices. Some Sierra Wireless firmwares support CDC MBIM but have no CDC Union funtional descriptor. This violates the MBIM specification, but we can easily work around the bug by looking at the Interface Association Descriptor instead. This is most likely what Windows uses too, which explains how the firmware bug has gone unnoticed until now. This change will not affect any currently supported device conforming to the NCM or MBIM specifications, as they must have the CDC Union descriptor. Cc: Greg Suarez Cc: Alexey Orishko Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 71b6e92b8e9b..4041159f6c98 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -344,6 +344,23 @@ static const struct ethtool_ops cdc_ncm_ethtool_ops = { .nway_reset = usbnet_nway_reset, }; +/* return first slave interface if an IAD matches the given master */ +static struct usb_interface *get_iad_slave(struct usb_device *udev, + struct usb_interface *master) { + int i; + struct usb_interface_assoc_descriptor *iad; + u8 mnum = master->cur_altsetting->desc.bInterfaceNumber; + + for (i = 0; i < USB_MAXIADS; i++) { + iad = udev->actconfig->intf_assoc[i]; + if (!iad) + break; + if (iad->bFirstInterface == mnum && iad->bInterfaceCount == 2) + return usb_ifnum_to_if(udev, mnum + 1); + } + return NULL; +} + int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting) { struct cdc_ncm_ctx *ctx; @@ -435,6 +452,16 @@ advance: len -= temp; } + /* some buggy devices have an IAD but no CDC Union */ + if (!ctx->union_desc) { + dev_dbg(&intf->dev, "missing CDC Union descriptor\n"); + ctx->data = get_iad_slave(dev->udev, intf); + if (ctx->data) { + ctx->control = intf; + dev_dbg(&intf->dev, "got slave from IAD\n"); + } + } + /* check if we got everything */ if ((ctx->control == NULL) || (ctx->data == NULL) || ((!ctx->mbim_desc) && ((ctx->ether_desc == NULL) || (ctx->control != intf)))) -- cgit v1.2.3 From 328d7b8a4ab045484e1cc09579abf13c8c6223e3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 21 Jan 2013 05:50:39 +0000 Subject: net: cdc_mbim: send ZLP after max sized NTBs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We normally avoid sending ZLPs by padding NTBs with a zero byte if the NTB is shorter than dwNtbOutMaxSize, resulting in a short USB packet instead of a ZLP. But in the case where the NTB length is exactly dwNtbOutMaxSize and this is an exact multiplum of wMaxPacketSize, then we must send a ZLP. This fixes an issue seen on a Sierra Wireless MC7710 device where the transmission would fail whenever we ended up padding the NTBs to max size. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 42f51c71ec1f..3a5673aa1c37 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -366,7 +366,7 @@ err: static const struct driver_info cdc_mbim_info = { .description = "CDC MBIM", - .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN, + .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP, .bind = cdc_mbim_bind, .unbind = cdc_mbim_unbind, .manage_power = cdc_mbim_manage_power, -- cgit v1.2.3 From 6b4ef60299e30daa8643218fde6152d8a01e2d4b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 21 Jan 2013 05:50:40 +0000 Subject: net: cdc_ncm: fix error path for single interface probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bbc8d92 (net: cdc_ncm: add Huawei devices) implemented support for devices with a single combined control and data interface. Fix up the error path so that we do not double release such interfaces in case of probing failures. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4041159f6c98..2c4b41ffddb6 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -524,7 +524,8 @@ advance: error2: usb_set_intfdata(ctx->control, NULL); usb_set_intfdata(ctx->data, NULL); - usb_driver_release_interface(driver, ctx->data); + if (ctx->data != ctx->control) + usb_driver_release_interface(driver, ctx->data); error: cdc_ncm_free((struct cdc_ncm_ctx *)dev->data[0]); dev->data[0] = 0; -- cgit v1.2.3 From 6509141f9c2ba74df6cc72ec35cd1865276ae3a4 Mon Sep 17 00:00:00 2001 From: Wei Shuai Date: Mon, 21 Jan 2013 06:00:31 +0000 Subject: usbnet: add new flag FLAG_NOARP for usb net devices We do have some USB net devices, which cannot do ARP. so we can introduce a new flag FLAG_NOARP, then client drivers can easily handle this kind of devices Signed-off-by: Wei Shuai Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 ++++ include/linux/usb/usbnet.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 3d4bf01641b4..f34b2ebee815 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1448,6 +1448,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) if ((dev->driver_info->flags & FLAG_WWAN) != 0) strcpy(net->name, "wwan%d"); + /* devices that cannot do ARP */ + if ((dev->driver_info->flags & FLAG_NOARP) != 0) + net->flags |= IFF_NOARP; + /* maybe the remote can't receive an Ethernet MTU */ if (net->mtu > (dev->hard_mtu - net->hard_header_len)) net->mtu = dev->hard_mtu - net->hard_header_len; diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index bd45eb7bedc8..5de7a220e986 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -100,6 +100,7 @@ struct driver_info { #define FLAG_LINK_INTR 0x0800 /* updates link (carrier) status */ #define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ +#define FLAG_NOARP 0x2000 /* device can't do ARP */ /* * Indicates to usbnet, that USB driver accumulates multiple IP packets. -- cgit v1.2.3 From 2f62d5aa2879dc380881b2c74d042051dbb60bc8 Mon Sep 17 00:00:00 2001 From: Wei Shuai Date: Mon, 21 Jan 2013 06:00:32 +0000 Subject: cdc_ncm: add support FLAG_NOARP for Infineon modem platform Infineon(now Intel) HSPA Modem platform NCM cannot support ARP. we can define a new common structure wwan_noarp_info. Then more similiar NO ARP devices can be handled easily Signed-off-by: Wei Shuai Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 2c4b41ffddb6..f94711caa08a 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1183,6 +1183,20 @@ static const struct driver_info wwan_info = { .tx_fixup = cdc_ncm_tx_fixup, }; +/* Same as wwan_info, but with FLAG_NOARP */ +static const struct driver_info wwan_noarp_info = { + .description = "Mobile Broadband Network Device (NO ARP)", + .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET + | FLAG_WWAN | FLAG_NOARP, + .bind = cdc_ncm_bind, + .unbind = cdc_ncm_unbind, + .check_connect = cdc_ncm_check_connect, + .manage_power = usbnet_manage_power, + .status = cdc_ncm_status, + .rx_fixup = cdc_ncm_rx_fixup, + .tx_fixup = cdc_ncm_tx_fixup, +}; + static const struct usb_device_id cdc_devs[] = { /* Ericsson MBM devices like F5521gw */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO @@ -1222,6 +1236,13 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long)&wwan_info, }, + /* Infineon(now Intel) HSPA Modem platform */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1519, 0x0443, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_noarp_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), -- cgit v1.2.3 From d721a1752ba544df8d7d36959038b26bc92bdf80 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:21 +0000 Subject: isdn/gigaset: fix zero size border case in debug dump If subtracting 12 from l leaves zero we'd do a zero size allocation, leading to an oops later when we try to set the NUL terminator. Reported-by: Dan Carpenter Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller --- drivers/isdn/gigaset/capi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c index 68452b768da2..03a0a01a4054 100644 --- a/drivers/isdn/gigaset/capi.c +++ b/drivers/isdn/gigaset/capi.c @@ -248,6 +248,8 @@ static inline void dump_rawmsg(enum debuglevel level, const char *tag, CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l, CAPIMSG_CONTROL(data)); l -= 12; + if (l <= 0) + return; dbgline = kmalloc(3 * l, GFP_ATOMIC); if (!dbgline) return; -- cgit v1.2.3 From a05948f296ce103989b28a2606e47d2e287c3c89 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 22 Jan 2013 06:33:05 +0000 Subject: netxen: fix off by one bug in netxen_release_tx_buffer() Christoph Paasch found netxen could trigger a BUG in its dismantle phase, in netxen_release_tx_buffer(), using full size TSO packets. cmd_buf->frag_count includes the skb->data part, so the loop must start at index 1 instead of 0, or else we can make an out of bound access to cmd_buff->frag_array[MAX_SKB_FRAGS + 2] Christoph provided the fixes in netxen_map_tx_skb() function. In case of a dma mapping error, its better to clear the dma fields so that we don't try to unmap them again in netxen_release_tx_buffer() Reported-by: Christoph Paasch Signed-off-by: Eric Dumazet Tested-by: Christoph Paasch Cc: Sony Chacko Cc: Rajesh Borundia Signed-off-by: Christoph Paasch Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 2 +- drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index bc165f4d0f65..695667d471a1 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -144,7 +144,7 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter) buffrag->length, PCI_DMA_TODEVICE); buffrag->dma = 0ULL; } - for (j = 0; j < cmd_buf->frag_count; j++) { + for (j = 1; j < cmd_buf->frag_count; j++) { buffrag++; if (buffrag->dma) { pci_unmap_page(adapter->pdev, buffrag->dma, diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 6098fd4adfeb..69e321a65077 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -1963,10 +1963,12 @@ unwind: while (--i >= 0) { nf = &pbuf->frag_array[i+1]; pci_unmap_page(pdev, nf->dma, nf->length, PCI_DMA_TODEVICE); + nf->dma = 0ULL; } nf = &pbuf->frag_array[0]; pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE); + nf->dma = 0ULL; out_err: return -ENOMEM; -- cgit v1.2.3 From d84295067fc7e95660d84c014aa528f4409c070d Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Mon, 21 Jan 2013 21:09:00 +0000 Subject: net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly Commit 6a328d8c6f03501657ad580f6f98bf9a42583ff7 changed the update logic for the socket but it does not update the SCM_RIGHTS update as well. This patch is based on the net_prio fix commit 48a87cc26c13b68f6cce4e9d769fcb17a6b3e4b8 net: netprio: fd passed in SCM_RIGHTS datagram not set correctly A socket fd passed in a SCM_RIGHTS datagram was not getting updated with the new tasks cgrp prioidx. This leaves IO on the socket tagged with the old tasks priority. To fix this add a check in the scm recvmsg path to update the sock cgrp prioidx with the new tasks value. Let's apply the same fix for net_cls. Signed-off-by: Daniel Wagner Reported-by: Li Zefan Cc: "David S. Miller" Cc: "Eric W. Biederman" Cc: Al Viro Cc: John Fastabend Cc: Neil Horman Cc: netdev@vger.kernel.org Cc: cgroups@vger.kernel.org Signed-off-by: David S. Miller --- net/core/scm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/core/scm.c b/net/core/scm.c index 57fb1ee6649f..905dcc6ad1e3 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -35,6 +35,7 @@ #include #include #include +#include /* @@ -302,8 +303,10 @@ void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm) } /* Bump the usage count and install the file. */ sock = sock_from_file(fp[i], &err); - if (sock) + if (sock) { sock_update_netprioidx(sock->sk, current); + sock_update_classid(sock->sk, current); + } fd_install(new_fd, get_file(fp[i])); } -- cgit v1.2.3 From b44108dbdbaa07c609bb5755e8dd6c2035236251 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 22 Jan 2013 00:01:28 +0000 Subject: ipv4: Fix route refcount on pmtu discovery git commit 9cb3a50c (ipv4: Invalidate the socket cached route on pmtu events if possible) introduced a refcount problem. We don't get a refcount on the route if we get it from__sk_dst_get(), but we need one if we want to reuse this route because __sk_dst_set() releases the refcount of the old route. This patch adds proper refcount handling for that case. We introduce a 'new' flag to indicate that we are going to use a new route and we release the old route only if we replace it by a new one. Reported-by: Julian Anastasov Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/route.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 132737a7c83a..a0fcc47fee73 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -985,6 +985,7 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) struct flowi4 fl4; struct rtable *rt; struct dst_entry *dst; + bool new = false; bh_lock_sock(sk); rt = (struct rtable *) __sk_dst_get(sk); @@ -1000,20 +1001,26 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) rt = ip_route_output_flow(sock_net(sk), &fl4, sk); if (IS_ERR(rt)) goto out; + + new = true; } __ip_rt_update_pmtu((struct rtable *) rt->dst.path, &fl4, mtu); dst = dst_check(&rt->dst, 0); if (!dst) { + if (new) + dst_release(&rt->dst); + rt = ip_route_output_flow(sock_net(sk), &fl4, sk); if (IS_ERR(rt)) goto out; - dst = &rt->dst; + new = true; } - __sk_dst_set(sk, dst); + if (new) + __sk_dst_set(sk, &rt->dst); out: bh_unlock_sock(sk); -- cgit v1.2.3 From fa4cffcba9e13798ed7c6b8526b91b1631ecb53e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 Jan 2013 11:45:15 +0100 Subject: iwlegacy: fix IBSS cleanup We do not correctly change interface type when switching from IBSS mode to STA mode, that results in microcode errors. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=886946 Reported-by: Jaroslav Skarvada Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/common.c | 35 ++++++++++++++-------------------- 1 file changed, 14 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 7e16d10a7f14..90b8970eadf0 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -3958,17 +3958,21 @@ il_connection_init_rx_config(struct il_priv *il) memset(&il->staging, 0, sizeof(il->staging)); - if (!il->vif) { + switch (il->iw_mode) { + case NL80211_IFTYPE_UNSPECIFIED: il->staging.dev_type = RXON_DEV_TYPE_ESS; - } else if (il->vif->type == NL80211_IFTYPE_STATION) { + break; + case NL80211_IFTYPE_STATION: il->staging.dev_type = RXON_DEV_TYPE_ESS; il->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; - } else if (il->vif->type == NL80211_IFTYPE_ADHOC) { + break; + case NL80211_IFTYPE_ADHOC: il->staging.dev_type = RXON_DEV_TYPE_IBSS; il->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; il->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK | RXON_FILTER_ACCEPT_GRP_MSK; - } else { + break; + default: IL_ERR("Unsupported interface type %d\n", il->vif->type); return; } @@ -4550,8 +4554,7 @@ out: EXPORT_SYMBOL(il_mac_add_interface); static void -il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif, - bool mode_change) +il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif) { lockdep_assert_held(&il->mutex); @@ -4560,9 +4563,7 @@ il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif, il_force_scan_end(il); } - if (!mode_change) - il_set_mode(il); - + il_set_mode(il); } void @@ -4575,8 +4576,8 @@ il_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) WARN_ON(il->vif != vif); il->vif = NULL; - - il_teardown_interface(il, vif, false); + il->iw_mode = NL80211_IFTYPE_UNSPECIFIED; + il_teardown_interface(il, vif); memset(il->bssid, 0, ETH_ALEN); D_MAC80211("leave\n"); @@ -4685,18 +4686,10 @@ il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } /* success */ - il_teardown_interface(il, vif, true); vif->type = newtype; vif->p2p = false; - err = il_set_mode(il); - WARN_ON(err); - /* - * We've switched internally, but submitting to the - * device may have failed for some reason. Mask this - * error, because otherwise mac80211 will not switch - * (and set the interface type back) and we'll be - * out of sync with it. - */ + il->iw_mode = newtype; + il_teardown_interface(il, vif); err = 0; out: -- cgit v1.2.3 From 430d25251ef3c36404e6b4a7eaaae35e225bc8e7 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 19 Jan 2013 12:36:49 -0600 Subject: rtlwifi: Fix build warning introduced by commit a290593 The kbuild test robot reports the following warning with x86_64-randconfig-x955: warning: (RTL8192CE && RTL8192SE && RTL8192DE && RTL8723AE && RTL8192CU) selects RTLWIFI which has unmet direct dependencies (NETDEVICES && WLAN && (RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE)) This warning was introduced in commit a290593, "rtlwifi: Modify files for addition of rtl8723ae", and is d ue to a missing dependence of RTLWIFI on RTL8723AE. Signed-off-by: Larry Finger Cc: kbuild test robot Reported-by: kbuild test robot Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index 21b1bbb93a7e..b80bc4612581 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -57,12 +57,12 @@ config RTL8192CU config RTLWIFI tristate - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE + depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE default m config RTLWIFI_DEBUG bool "Additional debugging output" - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE + depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE default y config RTL8192C_COMMON -- cgit v1.2.3 From 4a8f199508d79ff8a7d1e22f47b912baaf225336 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:20 +0100 Subject: ath9k_hw: fix calibration issues on chainmask that don't include chain 0 Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 ++ drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/hw.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 8b0d8dcd7625..56317b0fb6b6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -976,6 +976,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, AR_PHY_CL_TAB_1, AR_PHY_CL_TAB_2 }; + ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask); + if (rtt) { if (!ar9003_hw_rtt_restore(ah, chan)) run_rtt_cal = true; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index ce19c09fa8e8..8290eddaf0e3 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -586,7 +586,7 @@ static void ar9003_hw_init_bb(struct ath_hw *ah, ath9k_hw_synth_delay(ah, chan, synthDelay); } -static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) +void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) { switch (rx) { case 0x5: diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 7f1a8e91c908..9d26fc56ca56 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1066,6 +1066,7 @@ void ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain); int ar9003_paprd_init_table(struct ath_hw *ah); bool ar9003_paprd_is_done(struct ath_hw *ah); bool ar9003_is_paprd_enabled(struct ath_hw *ah); +void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx); /* Hardware family op attach helpers */ void ar5008_hw_attach_phy_ops(struct ath_hw *ah); -- cgit v1.2.3 From 24171dd92096fc370b195f3f6bdc0798855dc3f9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:21 +0100 Subject: ath9k_hw: fix chain swap setting when setting rx chainmask to 5 Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 8290eddaf0e3..3afc24bde6d6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -588,30 +588,17 @@ static void ar9003_hw_init_bb(struct ath_hw *ah, void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) { - switch (rx) { - case 0x5: + if (ah->caps.tx_chainmask == 5 || ah->caps.rx_chainmask == 5) REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, AR_PHY_SWAP_ALT_CHAIN); - case 0x3: - case 0x1: - case 0x2: - case 0x7: - REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx); - REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx); - break; - default: - break; - } + + REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx); + REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx); if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7)) - REG_WRITE(ah, AR_SELFGEN_MASK, 0x3); - else - REG_WRITE(ah, AR_SELFGEN_MASK, tx); + tx = 3; - if (tx == 0x5) { - REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, - AR_PHY_SWAP_ALT_CHAIN); - } + REG_WRITE(ah, AR_SELFGEN_MASK, tx); } /* -- cgit v1.2.3 From fea92cbf0850d788683827990670d3968f893327 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:22 +0100 Subject: ath9k: allow setting arbitrary antenna masks on AR9003+ Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3796e65c26f1..dd91f8fdc01c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1826,6 +1826,9 @@ static u32 fill_chainmask(u32 cap, u32 new) static bool validate_antenna_mask(struct ath_hw *ah, u32 val) { + if (AR_SREV_9300_20_OR_LATER(ah)) + return true; + switch (val & 0x7) { case 0x1: case 0x3: -- cgit v1.2.3 From 83f0c6d1f502bd75bb4a9e31e8d64e59c6894ad1 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 21 Jan 2013 21:04:10 -0800 Subject: mwifiex: fix typo in PCIe adapter NULL check Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Cc: "3.2+" Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Reviewed-by: Sergey V. Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 13fbc4eb1595..b879e1338a54 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -161,7 +161,7 @@ static int mwifiex_pcie_suspend(struct pci_dev *pdev, pm_message_t state) if (pdev) { card = (struct pcie_service_card *) pci_get_drvdata(pdev); - if (!card || card->adapter) { + if (!card || !card->adapter) { pr_err("Card or adapter structure is not valid\n"); return 0; } -- cgit v1.2.3 From 844e88f04410cc4e85615db519c1d44089333c4f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 23 Jan 2013 00:57:02 +0000 Subject: net: cdc_mbim: send ZLP only for the specific buggy device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reverting 328d7b8 and instead adding an exception for the Sierra Wireless MC7710. commit 328d7b8 (net: cdc_mbim: send ZLP after max sized NTBs) added a workaround for an issue observed on one specific device. Concerns were raised that this workaround adds a performance penalty to all devices based on questionable, if not buggy, behaviour of a single device: "If you add ZLP for NTBs of dwNtbOutMaxSize, you are heavily affecting CPU load, increasing interrupt load by factor of 2 in high load traffic scenario and possibly decreasing throughput for all other devices which behaves correctly." "The idea of NCM was to avoid extra ZLPs. If your transfer is exactly dwNtbOutMaxSize, it's known, you can submit such request on the receiver side and you do not need any EOT indicatation, so the frametime can be used for useful data." Adding a device specific exception to prevent the workaround from affecting well behaved devices. The assumption here is that needing a ZLP is truly an *exception*. We do not yet have enough data to verify this. The generic workaround in commit 328d7b8 should be considered acceptable despite the performance penalty if the exception list becomes a maintainance hassle. Cc: Alexey ORISHKO Cc: Yauheni Kaliuta Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 3a5673aa1c37..248d2dc765a5 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -365,6 +365,21 @@ err: } static const struct driver_info cdc_mbim_info = { + .description = "CDC MBIM", + .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN, + .bind = cdc_mbim_bind, + .unbind = cdc_mbim_unbind, + .manage_power = cdc_mbim_manage_power, + .rx_fixup = cdc_mbim_rx_fixup, + .tx_fixup = cdc_mbim_tx_fixup, +}; + +/* MBIM and NCM devices should not need a ZLP after NTBs with + * dwNtbOutMaxSize length. This driver_info is for the exceptional + * devices requiring it anyway, allowing them to be supported without + * forcing the performance penalty on all the sane devices. + */ +static const struct driver_info cdc_mbim_info_zlp = { .description = "CDC MBIM", .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP, .bind = cdc_mbim_bind, @@ -385,6 +400,10 @@ static const struct usb_device_id mbim_devs[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&cdc_mbim_info, }, + /* Sierra Wireless MC7710 need ZLPs */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68a2, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&cdc_mbim_info_zlp, + }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&cdc_mbim_info, }, -- cgit v1.2.3 From edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 23 Jan 2013 03:59:12 +0000 Subject: tuntap: reduce memory using of queues A MAX_TAP_QUEUES(1024) queues of tuntap device is always allocated unconditionally even userspace only requires a single queue device. This is unnecessary and will lead a very high order of page allocation when has a high possibility to fail. Solving this by creating a one queue net device when userspace only use one queue and also reduce MAX_TAP_QUEUES to DEFAULT_MAX_NUM_RSS_QUEUES which can guarantee the success of the allocation. Reported-by: Dirk Hohndel Cc: Eric Dumazet Cc: David Woodhouse Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/tun.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index c81680dc10eb..8939d2117de2 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -109,11 +109,10 @@ struct tap_filter { unsigned char addr[FLT_EXACT_COUNT][ETH_ALEN]; }; -/* 1024 is probably a high enough limit: modern hypervisors seem to support on - * the order of 100-200 CPUs so this leaves us some breathing space if we want - * to match a queue per guest CPU. - */ -#define MAX_TAP_QUEUES 1024 +/* DEFAULT_MAX_NUM_RSS_QUEUES were choosed to let the rx/tx queues allocated for + * the netdevice to be fit in one page. So we can make sure the success of + * memory allocation. TODO: increase the limit. */ +#define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES #define TUN_FLOW_EXPIRE (3 * HZ) @@ -1583,6 +1582,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) else { char *name; unsigned long flags = 0; + int queues = ifr->ifr_flags & IFF_MULTI_QUEUE ? + MAX_TAP_QUEUES : 1; if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) return -EPERM; @@ -1606,8 +1607,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) name = ifr->ifr_name; dev = alloc_netdev_mqs(sizeof(struct tun_struct), name, - tun_setup, - MAX_TAP_QUEUES, MAX_TAP_QUEUES); + tun_setup, queues, queues); + if (!dev) return -ENOMEM; -- cgit v1.2.3 From b8732fb7f8920e2f6216d2b67faf8b0b0d67ca81 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 23 Jan 2013 03:59:13 +0000 Subject: tuntap: limit the number of flow caches We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 8939d2117de2..cc09b67c23bc 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -113,6 +113,7 @@ struct tap_filter { * the netdevice to be fit in one page. So we can make sure the success of * memory allocation. TODO: increase the limit. */ #define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES +#define MAX_TAP_FLOWS 4096 #define TUN_FLOW_EXPIRE (3 * HZ) @@ -185,6 +186,7 @@ struct tun_struct { unsigned int numdisabled; struct list_head disabled; void *security; + u32 flow_count; }; static inline u32 tun_hashfn(u32 rxhash) @@ -218,6 +220,7 @@ static struct tun_flow_entry *tun_flow_create(struct tun_struct *tun, e->queue_index = queue_index; e->tun = tun; hlist_add_head_rcu(&e->hash_link, head); + ++tun->flow_count; } return e; } @@ -228,6 +231,7 @@ static void tun_flow_delete(struct tun_struct *tun, struct tun_flow_entry *e) e->rxhash, e->queue_index); hlist_del_rcu(&e->hash_link); kfree_rcu(e, rcu); + --tun->flow_count; } static void tun_flow_flush(struct tun_struct *tun) @@ -317,7 +321,8 @@ static void tun_flow_update(struct tun_struct *tun, u32 rxhash, e->updated = jiffies; } else { spin_lock_bh(&tun->lock); - if (!tun_flow_find(head, rxhash)) + if (!tun_flow_find(head, rxhash) && + tun->flow_count < MAX_TAP_FLOWS) tun_flow_create(tun, head, rxhash, queue_index); if (!timer_pending(&tun->flow_gc_timer)) -- cgit v1.2.3 From 5d0feaff230c0abfe4a112e6f09f096ed99e0b2d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timo=20Ter=C3=A4s?= Date: Mon, 21 Jan 2013 22:30:35 +0000 Subject: r8169: remove the obsolete and incorrect AMD workaround MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was introduced in commit 6dccd16 "r8169: merge with version 6.001.00 of Realtek's r8169 driver". I did not find the version 6.001.00 online, but in 6.002.00 or any later r8169 from Realtek this hunk is no longer present. Also commit 05af214 "r8169: fix Ethernet Hangup for RTL8110SC rev d" claims to have fixed this issue otherwise. The magic compare mask of 0xfffe000 is dubious as it masks parts of the Reserved part, and parts of the VLAN tag. But this does not make much sense as the VLAN tag parts are perfectly valid there. In matter of fact this seems to be triggered with any VLAN tagged packet as RxVlanTag bit is matched. I would suspect 0xfffe0000 was intended to test reserved part only. Finally, this hunk is evil as it can cause more packets to be handled than what was NAPI quota causing net/core/dev.c: net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and mess up the NAPI state causing device to hang. As result, any system using VLANs and having high receive traffic (so that NAPI poll budget limits rtl_rx) would result in device hang. Signed-off-by: Timo Teräs Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index ed96f309bca8..c28bc318cec6 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6111,13 +6111,6 @@ process_pkt: tp->rx_stats.bytes += pkt_size; u64_stats_update_end(&tp->rx_stats.syncp); } - - /* Work around for AMD plateform. */ - if ((desc->opts2 & cpu_to_le32(0xfffe000)) && - (tp->mac_version == RTL_GIGA_MAC_VER_05)) { - desc->opts2 = 0; - cur_rx++; - } } count = cur_rx - tp->cur_rx; -- cgit v1.2.3 From 6ea45886865c1abb01bb861f7f6bdd5d0f398cb3 Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:32:39 +0100 Subject: can: c_can: fix invalid error codes Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable Cc: Bhupesh Sharma Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 5233b8f58d77..58607f196c9e 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -960,7 +960,7 @@ static int c_can_handle_bus_err(struct net_device *dev, break; case LEC_ACK_ERROR: netdev_dbg(dev, "ack error\n"); - cf->data[2] |= (CAN_ERR_PROT_LOC_ACK | + cf->data[3] |= (CAN_ERR_PROT_LOC_ACK | CAN_ERR_PROT_LOC_ACK_DEL); break; case LEC_BIT1_ERROR: @@ -973,7 +973,7 @@ static int c_can_handle_bus_err(struct net_device *dev, break; case LEC_CRC_ERROR: netdev_dbg(dev, "CRC error\n"); - cf->data[2] |= (CAN_ERR_PROT_LOC_CRC_SEQ | + cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ | CAN_ERR_PROT_LOC_CRC_DEL); break; default: -- cgit v1.2.3 From 71088c4bd9b8f8cbffb0e66f2abc14297e4b2ca8 Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:32:40 +0100 Subject: can: ti_hecc: fix invalid error codes Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable Cc: Anant Gole Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ti_hecc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index f898c6363729..300581b24ff3 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -746,12 +746,12 @@ static int ti_hecc_error(struct net_device *ndev, int int_status, } if (err_status & HECC_CANES_CRCE) { hecc_set_bit(priv, HECC_CANES, HECC_CANES_CRCE); - cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ | + cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ | CAN_ERR_PROT_LOC_CRC_DEL; } if (err_status & HECC_CANES_ACKE) { hecc_set_bit(priv, HECC_CANES, HECC_CANES_ACKE); - cf->data[2] |= CAN_ERR_PROT_LOC_ACK | + cf->data[3] |= CAN_ERR_PROT_LOC_ACK | CAN_ERR_PROT_LOC_ACK_DEL; } } -- cgit v1.2.3 From ee50e135aeb048b90fab662e661c58b67341830b Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:32:41 +0100 Subject: can: pch_can: fix invalid error codes Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/pch_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index 7d1748575b1f..5c314a961970 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -560,7 +560,7 @@ static void pch_can_error(struct net_device *ndev, u32 status) stats->rx_errors++; break; case PCH_CRC_ERR: - cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ | + cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ | CAN_ERR_PROT_LOC_CRC_DEL; priv->can.can_stats.bus_error++; stats->rx_errors++; -- cgit v1.2.3 From 47be24796c13e7d9f087005c2bedc68ee0709f7b Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Thu, 24 Jan 2013 23:51:29 +0000 Subject: virtio-net: fix the set affinity bug when CPU IDs are not consecutive As Michael mentioned, set affinity and select queue will not work very well when CPU IDs are not consecutive, this can happen with hot unplug. Fix this bug by traversal the online CPUs, and create a per cpu variable to find the mapping from CPU to the preferable virtual-queue. Cc: Rusty Russell Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Eric Dumazet Cc: "David S. Miller" Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 67 ++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 54 insertions(+), 13 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index a6fcf15adc4f..fda214a5426a 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -123,6 +123,9 @@ struct virtnet_info { /* Does the affinity hint is set for virtqueues? */ bool affinity_hint_set; + + /* Per-cpu variable to show the mapping from CPU to virtqueue */ + int __percpu *vq_index; }; struct skb_vnet_hdr { @@ -1016,6 +1019,7 @@ static int virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) static void virtnet_set_affinity(struct virtnet_info *vi, bool set) { int i; + int cpu; /* In multiqueue mode, when the number of cpu is equal to the number of * queue pairs, we let the queue pairs to be private to one cpu by @@ -1023,22 +1027,40 @@ static void virtnet_set_affinity(struct virtnet_info *vi, bool set) */ if ((vi->curr_queue_pairs == 1 || vi->max_queue_pairs != num_online_cpus()) && set) { - if (vi->affinity_hint_set) + if (vi->affinity_hint_set) { set = false; - else + } else { + i = 0; + for_each_online_cpu(cpu) + *per_cpu_ptr(vi->vq_index, cpu) = + ++i % vi->curr_queue_pairs; return; + } } - for (i = 0; i < vi->max_queue_pairs; i++) { - int cpu = set ? i : -1; - virtqueue_set_affinity(vi->rq[i].vq, cpu); - virtqueue_set_affinity(vi->sq[i].vq, cpu); - } + if (set) { + i = 0; + for_each_online_cpu(cpu) { + virtqueue_set_affinity(vi->rq[i].vq, cpu); + virtqueue_set_affinity(vi->sq[i].vq, cpu); + *per_cpu_ptr(vi->vq_index, cpu) = i; + i++; + } - if (set) vi->affinity_hint_set = true; - else + } else { + for(i = 0; i < vi->max_queue_pairs; i++) { + virtqueue_set_affinity(vi->rq[i].vq, -1); + virtqueue_set_affinity(vi->sq[i].vq, -1); + } + + i = 0; + for_each_online_cpu(cpu) + *per_cpu_ptr(vi->vq_index, cpu) = + ++i % vi->curr_queue_pairs; + vi->affinity_hint_set = false; + } } static void virtnet_get_ringparam(struct net_device *dev, @@ -1082,6 +1104,7 @@ static int virtnet_set_channels(struct net_device *dev, if (queue_pairs > vi->max_queue_pairs) return -EINVAL; + get_online_cpus(); err = virtnet_set_queues(vi, queue_pairs); if (!err) { netif_set_real_num_tx_queues(dev, queue_pairs); @@ -1089,6 +1112,7 @@ static int virtnet_set_channels(struct net_device *dev, virtnet_set_affinity(vi, true); } + put_online_cpus(); return err; } @@ -1127,12 +1151,19 @@ static int virtnet_change_mtu(struct net_device *dev, int new_mtu) /* To avoid contending a lock hold by a vcpu who would exit to host, select the * txq based on the processor id. - * TODO: handle cpu hotplug. */ static u16 virtnet_select_queue(struct net_device *dev, struct sk_buff *skb) { - int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : - smp_processor_id(); + int txq; + struct virtnet_info *vi = netdev_priv(dev); + + if (skb_rx_queue_recorded(skb)) { + txq = skb_get_rx_queue(skb); + } else { + txq = *__this_cpu_ptr(vi->vq_index); + if (txq == -1) + txq = 0; + } while (unlikely(txq >= dev->real_num_tx_queues)) txq -= dev->real_num_tx_queues; @@ -1371,7 +1402,10 @@ static int init_vqs(struct virtnet_info *vi) if (ret) goto err_free; + get_online_cpus(); virtnet_set_affinity(vi, true); + put_online_cpus(); + return 0; err_free: @@ -1453,6 +1487,10 @@ static int virtnet_probe(struct virtio_device *vdev) if (vi->stats == NULL) goto free; + vi->vq_index = alloc_percpu(int); + if (vi->vq_index == NULL) + goto free_stats; + mutex_init(&vi->config_lock); vi->config_enable = true; INIT_WORK(&vi->config_work, virtnet_config_changed_work); @@ -1476,7 +1514,7 @@ static int virtnet_probe(struct virtio_device *vdev) /* Allocate/initialize the rx/tx queues, and invoke find_vqs */ err = init_vqs(vi); if (err) - goto free_stats; + goto free_index; netif_set_real_num_tx_queues(dev, 1); netif_set_real_num_rx_queues(dev, 1); @@ -1520,6 +1558,8 @@ free_recv_bufs: free_vqs: cancel_delayed_work_sync(&vi->refill); virtnet_del_vqs(vi); +free_index: + free_percpu(vi->vq_index); free_stats: free_percpu(vi->stats); free: @@ -1554,6 +1594,7 @@ static void virtnet_remove(struct virtio_device *vdev) flush_work(&vi->config_work); + free_percpu(vi->vq_index); free_percpu(vi->stats); free_netdev(vi->dev); } -- cgit v1.2.3 From 8898c21cf37d04041863e7ecf53707dff504bda0 Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Thu, 24 Jan 2013 23:51:30 +0000 Subject: virtio-net: split out clean affinity function Split out the clean affinity function to virtnet_clean_affinity(). Cc: Rusty Russell Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Eric Dumazet Cc: "David S. Miller" Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 76 +++++++++++++++++++++++++----------------------- 1 file changed, 40 insertions(+), 36 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fda214a5426a..2f6fe9b6b17b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1016,51 +1016,55 @@ static int virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) return 0; } -static void virtnet_set_affinity(struct virtnet_info *vi, bool set) +static void virtnet_clean_affinity(struct virtnet_info *vi, long hcpu) { int i; int cpu; - /* In multiqueue mode, when the number of cpu is equal to the number of - * queue pairs, we let the queue pairs to be private to one cpu by - * setting the affinity hint to eliminate the contention. - */ - if ((vi->curr_queue_pairs == 1 || - vi->max_queue_pairs != num_online_cpus()) && set) { - if (vi->affinity_hint_set) { - set = false; - } else { - i = 0; - for_each_online_cpu(cpu) - *per_cpu_ptr(vi->vq_index, cpu) = - ++i % vi->curr_queue_pairs; - return; - } - } - - if (set) { - i = 0; - for_each_online_cpu(cpu) { - virtqueue_set_affinity(vi->rq[i].vq, cpu); - virtqueue_set_affinity(vi->sq[i].vq, cpu); - *per_cpu_ptr(vi->vq_index, cpu) = i; - i++; - } - - vi->affinity_hint_set = true; - } else { - for(i = 0; i < vi->max_queue_pairs; i++) { + if (vi->affinity_hint_set) { + for (i = 0; i < vi->max_queue_pairs; i++) { virtqueue_set_affinity(vi->rq[i].vq, -1); virtqueue_set_affinity(vi->sq[i].vq, -1); } - i = 0; - for_each_online_cpu(cpu) + vi->affinity_hint_set = false; + } + + i = 0; + for_each_online_cpu(cpu) { + if (cpu == hcpu) { + *per_cpu_ptr(vi->vq_index, cpu) = -1; + } else { *per_cpu_ptr(vi->vq_index, cpu) = ++i % vi->curr_queue_pairs; + } + } +} - vi->affinity_hint_set = false; +static void virtnet_set_affinity(struct virtnet_info *vi) +{ + int i; + int cpu; + + /* In multiqueue mode, when the number of cpu is equal to the number of + * queue pairs, we let the queue pairs to be private to one cpu by + * setting the affinity hint to eliminate the contention. + */ + if (vi->curr_queue_pairs == 1 || + vi->max_queue_pairs != num_online_cpus()) { + virtnet_clean_affinity(vi, -1); + return; } + + i = 0; + for_each_online_cpu(cpu) { + virtqueue_set_affinity(vi->rq[i].vq, cpu); + virtqueue_set_affinity(vi->sq[i].vq, cpu); + *per_cpu_ptr(vi->vq_index, cpu) = i; + i++; + } + + vi->affinity_hint_set = true; } static void virtnet_get_ringparam(struct net_device *dev, @@ -1110,7 +1114,7 @@ static int virtnet_set_channels(struct net_device *dev, netif_set_real_num_tx_queues(dev, queue_pairs); netif_set_real_num_rx_queues(dev, queue_pairs); - virtnet_set_affinity(vi, true); + virtnet_set_affinity(vi); } put_online_cpus(); @@ -1279,7 +1283,7 @@ static void virtnet_del_vqs(struct virtnet_info *vi) { struct virtio_device *vdev = vi->vdev; - virtnet_set_affinity(vi, false); + virtnet_clean_affinity(vi, -1); vdev->config->del_vqs(vdev); @@ -1403,7 +1407,7 @@ static int init_vqs(struct virtnet_info *vi) goto err_free; get_online_cpus(); - virtnet_set_affinity(vi, true); + virtnet_set_affinity(vi); put_online_cpus(); return 0; -- cgit v1.2.3 From 8de4b2f3ae90c8fc0f17eeaab87d5a951b66ee17 Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Thu, 24 Jan 2013 23:51:31 +0000 Subject: virtio-net: reset virtqueue affinity when doing cpu hotplug Add a cpu notifier to virtio-net, so that we can reset the virtqueue affinity if the cpu hotplug happens. It improve the performance through enabling or disabling the virtqueue affinity after doing cpu hotplug. Cc: Rusty Russell Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Eric Dumazet Cc: "David S. Miller" Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 2f6fe9b6b17b..35c00c5ea02a 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -26,6 +26,7 @@ #include #include #include +#include static int napi_weight = 128; module_param(napi_weight, int, 0444); @@ -126,6 +127,9 @@ struct virtnet_info { /* Per-cpu variable to show the mapping from CPU to virtqueue */ int __percpu *vq_index; + + /* CPU hot plug notifier */ + struct notifier_block nb; }; struct skb_vnet_hdr { @@ -1067,6 +1071,26 @@ static void virtnet_set_affinity(struct virtnet_info *vi) vi->affinity_hint_set = true; } +static int virtnet_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + struct virtnet_info *vi = container_of(nfb, struct virtnet_info, nb); + + switch(action & ~CPU_TASKS_FROZEN) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + case CPU_DEAD: + virtnet_set_affinity(vi); + break; + case CPU_DOWN_PREPARE: + virtnet_clean_affinity(vi, (long)hcpu); + break; + default: + break; + } + return NOTIFY_OK; +} + static void virtnet_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) { @@ -1541,6 +1565,13 @@ static int virtnet_probe(struct virtio_device *vdev) } } + vi->nb.notifier_call = &virtnet_cpu_callback; + err = register_hotcpu_notifier(&vi->nb); + if (err) { + pr_debug("virtio_net: registering cpu notifier failed\n"); + goto free_recv_bufs; + } + /* Assume link up if device can't report link status, otherwise get link status from config. */ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) { @@ -1587,6 +1618,8 @@ static void virtnet_remove(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; + unregister_hotcpu_notifier(&vi->nb); + /* Prevent config work handler from accessing the device. */ mutex_lock(&vi->config_lock); vi->config_enable = false; -- cgit v1.2.3 From 794ed393b707f01858f5ebe2ae5eabaf89d00022 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 25 Jan 2013 07:44:41 +0000 Subject: net: loopback: fix a dst refcounting issue Ben Greear reported crashes in ip_rcv_finish() on a stress test involving many macvlans. We tracked the bug to a dst use after free. ip_rcv_finish() was calling dst->input() and got garbage for dst->input value. It appears the bug is in loopback driver, lacking a skb_dst_force() before calling netif_rx(). As a result, a non refcounted dst, normally protected by a RCU read_lock section, was escaping this section and could be freed before the packet being processed. [] loopback_xmit+0x64/0x83 [] dev_hard_start_xmit+0x26c/0x35e [] dev_queue_xmit+0x2c4/0x37c [] ? dev_hard_start_xmit+0x35e/0x35e [] ? eth_header+0x28/0xb6 [] neigh_resolve_output+0x176/0x1a7 [] ip_finish_output2+0x297/0x30d [] ? ip_finish_output2+0x137/0x30d [] ip_finish_output+0x63/0x68 [] ip_output+0x61/0x67 [] dst_output+0x17/0x1b [] ip_local_out+0x1e/0x23 [] ip_queue_xmit+0x315/0x353 [] ? ip_send_unicast_reply+0x2cc/0x2cc [] tcp_transmit_skb+0x7ca/0x80b [] tcp_connect+0x53c/0x587 [] ? getnstimeofday+0x44/0x7d [] ? ktime_get_real+0x11/0x3e [] tcp_v4_connect+0x3c2/0x431 [] __inet_stream_connect+0x84/0x287 [] ? inet_stream_connect+0x22/0x49 [] ? _local_bh_enable_ip+0x84/0x9f [] ? local_bh_enable+0xd/0x11 [] ? lock_sock_nested+0x6e/0x79 [] ? inet_stream_connect+0x22/0x49 [] inet_stream_connect+0x33/0x49 [] sys_connect+0x75/0x98 This bug was introduced in linux-2.6.35, in commit 7fee226ad2397b (net: add a noref bit on skb dst) skb_dst_force() is enforced in dev_queue_xmit() for devices having a qdisc. Reported-by: Ben Greear Signed-off-by: Eric Dumazet Tested-by: Ben Greear Signed-off-by: David S. Miller --- drivers/net/loopback.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index 81f8f9e31db5..fcbf680c3e62 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -77,6 +77,11 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb, skb_orphan(skb); + /* Before queueing this packet to netif_rx(), + * make sure dst is refcounted. + */ + skb_dst_force(skb); + skb->protocol = eth_type_trans(skb, dev); /* it's OK to use per_cpu_ptr() because BHs are off */ -- cgit v1.2.3 From 0d15becee56fdfc2e9a4374c46ea7cf7562a6f32 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Wed, 23 Jan 2013 18:11:53 +0100 Subject: batman-adv: fix skb leak in batadv_dat_snoop_incoming_arp_reply() The callers of batadv_dat_snoop_incoming_arp_reply() assume the skb has been freed when it returns true; fix this by calling kfree_skb before returning as it is done in batadv_dat_snoop_incoming_arp_request(). Signed-off-by: Matthias Schiffer Signed-off-by: Marek Lindner Acked-by: Antonio Quartulli Signed-off-by: Antonio Quartulli --- net/batman-adv/distributed-arp-table.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 8e1d89d2b1c1..ce0d2992381a 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -1012,6 +1012,8 @@ bool batadv_dat_snoop_incoming_arp_reply(struct batadv_priv *bat_priv, */ ret = !batadv_is_my_client(bat_priv, hw_dst); out: + if (ret) + kfree_skb(skb); /* if ret == false -> packet has to be delivered to the interface */ return ret; } -- cgit v1.2.3 From 757dd82ea7008ddaccfecff3397bec3e3203a89e Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Thu, 24 Jan 2013 18:18:26 +0100 Subject: batman-adv: check for more types of invalid IP addresses in DAT There are more types of IP addresses that may appear in ARP packets that we don't want to process. While some of these should never appear in sane ARP packets, a 0.0.0.0 source is used for duplicate address detection and thus seen quite often. Signed-off-by: Matthias Schiffer Acked-by: Antonio Quartulli Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/distributed-arp-table.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index ce0d2992381a..ccb3c6c96ba7 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -777,7 +777,9 @@ static uint16_t batadv_arp_get_type(struct batadv_priv *bat_priv, ip_src = batadv_arp_ip_src(skb, hdr_size); ip_dst = batadv_arp_ip_dst(skb, hdr_size); if (ipv4_is_loopback(ip_src) || ipv4_is_multicast(ip_src) || - ipv4_is_loopback(ip_dst) || ipv4_is_multicast(ip_dst)) + ipv4_is_loopback(ip_dst) || ipv4_is_multicast(ip_dst) || + ipv4_is_zeronet(ip_src) || ipv4_is_lbcast(ip_src) || + ipv4_is_zeronet(ip_dst) || ipv4_is_lbcast(ip_dst)) goto out; type = ntohs(arphdr->ar_op); -- cgit v1.2.3 From b618ad1103c9ea0c4a69b44f42fc3c7b4e231e22 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Thu, 24 Jan 2013 18:18:27 +0100 Subject: batman-adv: filter ARP packets with invalid MAC addresses in DAT We never want multicast MAC addresses in the Distributed ARP Table, so it's best to completely ignore ARP packets containing them where we expect unicast addresses. Signed-off-by: Matthias Schiffer Acked-by: Antonio Quartulli Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/distributed-arp-table.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index ccb3c6c96ba7..183f97a86bb2 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -738,6 +738,7 @@ static uint16_t batadv_arp_get_type(struct batadv_priv *bat_priv, struct arphdr *arphdr; struct ethhdr *ethhdr; __be32 ip_src, ip_dst; + uint8_t *hw_src, *hw_dst; uint16_t type = 0; /* pull the ethernet header */ @@ -782,6 +783,18 @@ static uint16_t batadv_arp_get_type(struct batadv_priv *bat_priv, ipv4_is_zeronet(ip_dst) || ipv4_is_lbcast(ip_dst)) goto out; + hw_src = batadv_arp_hw_src(skb, hdr_size); + if (is_zero_ether_addr(hw_src) || is_multicast_ether_addr(hw_src)) + goto out; + + /* we don't care about the destination MAC address in ARP requests */ + if (arphdr->ar_op != htons(ARPOP_REQUEST)) { + hw_dst = batadv_arp_hw_dst(skb, hdr_size); + if (is_zero_ether_addr(hw_dst) || + is_multicast_ether_addr(hw_dst)) + goto out; + } + type = ntohs(arphdr->ar_op); out: return type; -- cgit v1.2.3 From 56a666dcfcb46e998a1bd969fb201bf51de3c412 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Jan 2013 23:36:59 +0000 Subject: net: cdc_ncm: use IAD provided by the USB core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 9992c2e (net: cdc_ncm: workaround for missing CDC Union) added code to lookup an IAD for the interface we are probing. This is redundant. The USB core has already done the lookup and saved the result in the USB interface struct. Use that instead. Cc: Greg Suarez Cc: Alexey Orishko Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index f94711caa08a..9197b2c72ca3 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -344,23 +344,6 @@ static const struct ethtool_ops cdc_ncm_ethtool_ops = { .nway_reset = usbnet_nway_reset, }; -/* return first slave interface if an IAD matches the given master */ -static struct usb_interface *get_iad_slave(struct usb_device *udev, - struct usb_interface *master) { - int i; - struct usb_interface_assoc_descriptor *iad; - u8 mnum = master->cur_altsetting->desc.bInterfaceNumber; - - for (i = 0; i < USB_MAXIADS; i++) { - iad = udev->actconfig->intf_assoc[i]; - if (!iad) - break; - if (iad->bFirstInterface == mnum && iad->bInterfaceCount == 2) - return usb_ifnum_to_if(udev, mnum + 1); - } - return NULL; -} - int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting) { struct cdc_ncm_ctx *ctx; @@ -453,13 +436,10 @@ advance: } /* some buggy devices have an IAD but no CDC Union */ - if (!ctx->union_desc) { - dev_dbg(&intf->dev, "missing CDC Union descriptor\n"); - ctx->data = get_iad_slave(dev->udev, intf); - if (ctx->data) { - ctx->control = intf; - dev_dbg(&intf->dev, "got slave from IAD\n"); - } + if (!ctx->union_desc && intf->intf_assoc && intf->intf_assoc->bInterfaceCount == 2) { + ctx->control = intf; + ctx->data = usb_ifnum_to_if(dev->udev, intf->cur_altsetting->desc.bInterfaceNumber + 1); + dev_dbg(&intf->dev, "CDC Union missing - got slave from IAD\n"); } /* check if we got everything */ -- cgit v1.2.3 From ce11ff5e5963e441feb591e76278528f876c332d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Thu, 24 Jan 2013 13:30:06 +0000 Subject: r8169: fix vlan tag read ordering. Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by: Francois Romieu Spotted-by: Timo Teras Cc: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index c28bc318cec6..11702324a071 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1826,8 +1826,6 @@ static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb) if (opts2 & RxVlanTag) __vlan_hwaccel_put_tag(skb, swab16(opts2 & 0xffff)); - - desc->opts2 = 0; } static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd) @@ -6064,8 +6062,6 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, u32 budget !(status & (RxRWT | RxFOVF)) && (dev->features & NETIF_F_RXALL)) goto process_pkt; - - rtl8169_mark_to_asic(desc, rx_buf_sz); } else { struct sk_buff *skb; dma_addr_t addr; @@ -6086,16 +6082,14 @@ process_pkt: if (unlikely(rtl8169_fragmented_frame(status))) { dev->stats.rx_dropped++; dev->stats.rx_length_errors++; - rtl8169_mark_to_asic(desc, rx_buf_sz); - continue; + goto release_descriptor; } skb = rtl8169_try_rx_copy(tp->Rx_databuff[entry], tp, pkt_size, addr); - rtl8169_mark_to_asic(desc, rx_buf_sz); if (!skb) { dev->stats.rx_dropped++; - continue; + goto release_descriptor; } rtl8169_rx_csum(skb, status); @@ -6111,6 +6105,10 @@ process_pkt: tp->rx_stats.bytes += pkt_size; u64_stats_update_end(&tp->rx_stats.syncp); } +release_descriptor: + desc->opts2 = 0; + wmb(); + rtl8169_mark_to_asic(desc, rx_buf_sz); } count = cur_rx - tp->cur_rx; -- cgit v1.2.3 From 75356a8143426a1301bc66c4fb920dcb1bd5e934 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 23 Jan 2013 20:38:34 +0000 Subject: ip6mr: limit IPv6 MRT_TABLE identifiers We did this for IPv4 in b49d3c1e1c "net: ipmr: limit MRT_TABLE identifiers" but we need to do it for IPv6 as well. On IPv6 the name is "pim6reg" instead of "pimreg" so there is one less digit allowed. The strcpy() is in ip6mr_reg_vif(). Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- net/ipv6/ip6mr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 26dcdec9e3a5..8fd154e5f079 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -1710,6 +1710,9 @@ int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, uns return -EINVAL; if (get_user(v, (u32 __user *)optval)) return -EFAULT; + /* "pim6reg%u" should not exceed 16 bytes (IFNAMSIZ) */ + if (v != RT_TABLE_DEFAULT && v >= 100000000) + return -EINVAL; if (sk == mrt->mroute6_sk) return -EBUSY; -- cgit v1.2.3 From 9839ff0dead906e85e4d17490aeff87a5859a157 Mon Sep 17 00:00:00 2001 From: Xufeng Zhang Date: Wed, 23 Jan 2013 16:44:34 +0000 Subject: sctp: set association state to established in dupcook_a handler While sctp handling a duplicate COOKIE-ECHO and the action is 'Association restart', sctp_sf_do_dupcook_a() will processing the unexpected COOKIE-ECHO for peer restart, but it does not set the association state to SCTP_STATE_ESTABLISHED, so the association could stuck in SCTP_STATE_SHUTDOWN_PENDING state forever. This violates the sctp specification: RFC 4960 5.2.4. Handle a COOKIE ECHO when a TCB Exists Action A) In this case, the peer may have restarted. ..... After this, the endpoint shall enter the ESTABLISHED state. To resolve this problem, adding a SCTP_CMD_NEW_STATE cmd to the command list before SCTP_CMD_REPLY cmd, this will set the restart association to SCTP_STATE_ESTABLISHED state properly and also avoid I-bit being set in the DATA chunk header when COOKIE_ACK is bundled with DATA chunks. Signed-off-by: Xufeng Zhang Acked-by: Neil Horman Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/sm_statefuns.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 618ec7e216ca..5131fcfedb03 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -1779,8 +1779,10 @@ static sctp_disposition_t sctp_sf_do_dupcook_a(struct net *net, /* Update the content of current association. */ sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc)); - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl)); sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev)); + sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE, + SCTP_STATE(SCTP_STATE_ESTABLISHED)); + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl)); return SCTP_DISPOSITION_CONSUME; nomem_ev: -- cgit v1.2.3 From 5465740ace36f179de5bb0ccb5d46ddeb945e309 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Wed, 23 Jan 2013 11:45:42 +0000 Subject: IP_GRE: Fix kernel panic in IP_GRE with GRE csum. Due to IP_GRE GSO support, GRE can recieve non linear skb which results in panic in case of GRE_CSUM. Following patch fixes it by using correct csum API. Bug introduced in commit 6b78f16e4bdde3936b (gre: add GSO support) Signed-off-by: Pravin B Shelar Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 303012adf9e6..e81b1caf2ea2 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -963,8 +963,12 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev ptr--; } if (tunnel->parms.o_flags&GRE_CSUM) { + int offset = skb_transport_offset(skb); + *ptr = 0; - *(__sum16 *)ptr = ip_compute_csum((void *)(iph+1), skb->len - sizeof(struct iphdr)); + *(__sum16 *)ptr = csum_fold(skb_checksum(skb, offset, + skb->len - offset, + 0)); } } -- cgit v1.2.3 From b4a496319f2fe4b46d7a9ab246f4fbf23a5a3106 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Wed, 23 Jan 2013 00:22:36 +0000 Subject: net: phy: icplus: Use the RGMII interface mode to configure clock delays Like several other PHY devices which support RGMII, the IC+1001 allows additional delays to by added to the RX_CLK and TX_CLK signals to compensate for skew between the clock and data signals. Previously this was always enabled, but this change makes use of the different RGMII interface modes to allow the user to specify whether this should be enabled. Signed-off-by: Stuart Menefy Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index d5199cb4caec..c0e092470182 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -36,8 +36,9 @@ MODULE_LICENSE("GPL"); /* IP101A/G - IP1001 */ #define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ +#define IP1001_RXPHASE_SEL (1<<0) /* Add delay on RX_CLK */ +#define IP1001_TXPHASE_SEL (1<<1) /* Add delay on TX_CLK */ #define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ -#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ #define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ @@ -143,14 +144,24 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; - if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { - /* Additional delay (2ns) used to adjust RX clock phase - * at RGMII interface */ + if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); if (c < 0) return c; - c |= IP1001_PHASE_SEL_MASK; + c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); + else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + c |= IP1001_RXPHASE_SEL; + else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + c |= IP1001_TXPHASE_SEL; + c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); if (c < 0) return c; -- cgit v1.2.3 From 014f2ffdf6e22581f172ba443be0ad924a913f46 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 23 Jan 2013 00:22:37 +0000 Subject: net: phy: icplus: fix broken INTR pin settings This patch fixes the setting of the INTR pin that is valid for IP101 A/G device and not for the IP1001. Reported-by: Anunay Saxena Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index c0e092470182..b5ddd5077a80 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -139,11 +139,6 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; - /* INTR pin used: speed/link/duplex will cause an interrupt */ - c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT); - if (c < 0) - return c; - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || @@ -178,6 +173,11 @@ static int ip101a_g_config_init(struct phy_device *phydev) if (c < 0) return c; + /* INTR pin used: speed/link/duplex will cause an interrupt */ + c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT); + if (c < 0) + return c; + /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); c |= IP101A_G_APS_ON; -- cgit v1.2.3 From 5f19d1219a5b96c7b00ad5c3f889030093a8d1a3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 24 Jan 2013 11:02:47 -0500 Subject: SCTP: Free the per-net sysctl table on net exit. v2 Per-net sysctl table needs to be explicitly freed at net exit. Otherwise we see the following with kmemleak: unreferenced object 0xffff880402d08000 (size 2048): comm "chrome_sandbox", pid 18437, jiffies 4310887172 (age 9097.630s) hex dump (first 32 bytes): b2 68 89 81 ff ff ff ff 20 04 04 f8 01 88 ff ff .h...... ....... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x21/0x3e [] slab_post_alloc_hook+0x28/0x2a [] __kmalloc_track_caller+0xf1/0x104 [] kmemdup+0x1b/0x30 [] sctp_sysctl_net_register+0x1f/0x72 [] sctp_net_init+0x100/0x39f [] ops_init+0xc6/0xf5 [] setup_net+0x4c/0xd0 [] copy_net_ns+0x6d/0xd6 [] create_new_namespaces+0xd7/0x147 [] copy_namespaces+0x63/0x99 [] copy_process+0xa65/0x1233 [] do_fork+0x10b/0x271 [] sys_clone+0x23/0x25 [] stub_clone+0x13/0x20 [] 0xffffffffffffffff I fixed the spelling of sysctl_header so the code actually compiles. -- EWB. Reported-by: Martin Mokrejs Signed-off-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- net/sctp/sysctl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c index 043889ac86c0..bf3c6e8fc401 100644 --- a/net/sctp/sysctl.c +++ b/net/sctp/sysctl.c @@ -366,7 +366,11 @@ int sctp_sysctl_net_register(struct net *net) void sctp_sysctl_net_unregister(struct net *net) { + struct ctl_table *table; + + table = net->sctp.sysctl_header->ctl_table_arg; unregister_net_sysctl_table(net->sctp.sysctl_header); + kfree(table); } static struct ctl_table_header * sctp_sysctl_header; -- cgit v1.2.3 From 6642f91c92da07369cf1e582503ea3ccb4a7f1a9 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Sun, 27 Jan 2013 12:34:22 +0000 Subject: dm9601: support dm9620 variant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dm9620 is a newer variant of dm9601 with more features (usb 2.0, checksum offload, ..), but it can also be put in a dm9601 compatible mode, allowing us to reuse the existing driver. This does mean that the extended features like checksum offload cannot be used, but that's hardly critical on a 100mbps interface. Thanks to Sławek Wernikowski for providing me with a dm9620 based device to test. Signed-off-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 011410f39c90..d7e99445518e 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -45,6 +45,12 @@ #define DM_MCAST_ADDR 0x16 /* 8 bytes */ #define DM_GPR_CTRL 0x1e #define DM_GPR_DATA 0x1f +#define DM_CHIP_ID 0x2c +#define DM_MODE_CTRL 0x91 /* only on dm9620 */ + +/* chip id values */ +#define ID_DM9601 0 +#define ID_DM9620 1 #define DM_MAX_MCAST 64 #define DM_MCAST_SIZE 8 @@ -348,7 +354,7 @@ static const struct net_device_ops dm9601_netdev_ops = { static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; - u8 mac[ETH_ALEN]; + u8 mac[ETH_ALEN], id; ret = usbnet_get_endpoints(dev, intf); if (ret) @@ -389,6 +395,24 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) __dm9601_set_mac_address(dev); } + if (dm_read_reg(dev, DM_CHIP_ID, &id) < 0) { + netdev_err(dev->net, "Error reading chip ID\n"); + ret = -ENODEV; + goto out; + } + + /* put dm9620 devices in dm9601 mode */ + if (id == ID_DM9620) { + u8 mode; + + if (dm_read_reg(dev, DM_MODE_CTRL, &mode) < 0) { + netdev_err(dev->net, "Error reading MODE_CTRL\n"); + ret = -ENODEV; + goto out; + } + dm_write_reg(dev, DM_MODE_CTRL, mode & 0x7f); + } + /* power up phy */ dm_write_reg(dev, DM_GPR_CTRL, 1); dm_write_reg(dev, DM_GPR_DATA, 0); @@ -571,6 +595,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0a46, 0x9000), /* DM9000E */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0a46, 0x9620), /* DM9620 USB to Fast Ethernet Adapter */ + .driver_info = (unsigned long)&dm9601_info, + }, {}, // END }; -- cgit v1.2.3