From 285cb4f62319737e6538252cf1a67ce9da5cf3d5 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Mon, 5 Feb 2018 16:45:36 +0000 Subject: irqchip/mips-gic: Avoid spuriously handling masked interrupts Commit 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") removed the read of the hardware mask register when handling shared interrupts, instead using the driver's shadow pcpu_masks entry as the effective mask. Unfortunately this did not take account of the write to pcpu_masks during gic_shared_irq_domain_map, which effectively unmasks the interrupt early. If an interrupt is asserted, gic_handle_shared_int decodes and processes the interrupt even though it has not yet been unmasked via gic_unmask_irq, which also sets the appropriate bit in pcpu_masks. On the MIPS Boston board, when a console command line of "console=ttyS0,115200n8r" is passed, the modem status IRQ is enabled in the UART, which is immediately raised to the GIC. The interrupt has been mapped, but no handler has yet been registered, nor is it expected to be unmasked. However, the write to pcpu_masks in gic_shared_irq_domain_map has effectively unmasked it, resulting in endless reports of: [ 5.058454] irq 13, desc: ffffffff80a7ad80, depth: 1, count: 0, unhandled: 0 [ 5.062057] ->handle_irq(): ffffffff801b1838, [ 5.062175] handle_bad_irq+0x0/0x2c0 Where IRQ 13 is the UART interrupt. To fix this, just remove the write to pcpu_masks in gic_shared_irq_domain_map. The existing write in gic_unmask_irq is the correct place for what is now the effective unmasking. Cc: stable@vger.kernel.org Fixes: 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") Signed-off-by: Matt Redfearn Reviewed-by: Paul Burton Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-mips-gic.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index ef92a4d2038e..d32268cc1174 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -424,8 +424,6 @@ static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq, spin_lock_irqsave(&gic_lock, flags); write_gic_map_pin(intr, GIC_MAP_PIN_MAP_TO_PIN | gic_cpu_pin); write_gic_map_vp(intr, BIT(mips_cm_vp_id(cpu))); - gic_clear_pcpu_masks(intr); - set_bit(intr, per_cpu_ptr(pcpu_masks, cpu)); irq_data_update_effective_affinity(data, cpumask_of(cpu)); spin_unlock_irqrestore(&gic_lock, flags); -- cgit v1.2.3 From b6dd4d83dc2f78cebc9a7e6e7e4bc2be4d29b94d Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Fri, 2 Feb 2018 09:20:29 -0500 Subject: irqchip/gic-v3: Change pr_debug message to pr_devel The pr_debug() in gic-v3 gic_send_sgi() can trigger a circular locking warning: GICv3: CPU10: ICC_SGI1R_EL1 5000400 ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #1 Tainted: G W ------------------------------------------------------ dynamic_debug01/1873 is trying to acquire lock: ((console_sem).lock){-...}, at: [<0000000099c891ec>] down_trylock+0x20/0x4c but task is already holding lock: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&rq->lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock+0x4c/0x60 task_fork_fair+0x3c/0x148 sched_fork+0x10c/0x214 copy_process.isra.32.part.33+0x4e8/0x14f0 _do_fork+0xe8/0x78c kernel_thread+0x48/0x54 rest_init+0x34/0x2a4 start_kernel+0x45c/0x488 -> #1 (&p->pi_lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 try_to_wake_up+0x48/0x600 wake_up_process+0x28/0x34 __up.isra.0+0x60/0x6c up+0x60/0x68 __up_console_sem+0x4c/0x7c console_unlock+0x328/0x634 vprintk_emit+0x25c/0x390 dev_vprintk_emit+0xc4/0x1fc dev_printk_emit+0x88/0xa8 __dev_printk+0x58/0x9c _dev_info+0x84/0xa8 usb_new_device+0x100/0x474 hub_port_connect+0x280/0x92c hub_event+0x740/0xa84 process_one_work+0x240/0x70c worker_thread+0x60/0x400 kthread+0x110/0x13c ret_from_fork+0x10/0x18 -> #0 ((console_sem).lock){-...}: validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 other info that might help us debug this: Chain exists of: (console_sem).lock --> &p->pi_lock --> &rq->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&rq->lock); lock(&p->pi_lock); lock(&rq->lock); lock((console_sem).lock); *** DEADLOCK *** 2 locks held by dynamic_debug01/1873: #0: (&p->pi_lock){-.-.}, at: [<000000001366df53>] wake_up_new_task+0x40/0x470 #1: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc stack backtrace: CPU: 10 PID: 1873 Comm: dynamic_debug01 Tainted: G W 4.15.0+ #1 Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS T48 10/02/2017 Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x2c dump_stack+0xa4/0xe0 print_circular_bug.isra.31+0x29c/0x2b8 check_prev_add.constprop.39+0x6c8/0x6dc validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 GICv3: CPU0: ICC_SGI1R_EL1 12000 This could be fixed with printk_deferred() but that might lessen its usefulness for debugging. So change it to pr_devel to keep it out of production kernels. Developers working on gic-v3 can enable it as needed in their kernels. Signed-off-by: Mark Salter Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index a57c0fbbd34a..d71be9a1f9d2 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -673,7 +673,7 @@ static void gic_send_sgi(u64 cluster_id, u16 tlist, unsigned int irq) MPIDR_TO_SGI_RS(cluster_id) | tlist << ICC_SGI1R_TARGET_LIST_SHIFT); - pr_debug("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val); + pr_devel("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val); gic_write_sgi1r(val); } -- cgit v1.2.3 From 21ec30c0ef5234fb1039cc7c7737d885bf875a9e Mon Sep 17 00:00:00 2001 From: Shanker Donthineni Date: Wed, 31 Jan 2018 18:03:42 -0600 Subject: irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() A DMB instruction can be used to ensure the relative order of only memory accesses before and after the barrier. Since writes to system registers are not memory operations, barrier DMB is not sufficient for observability of memory accesses that occur before ICC_SGI1R_EL1 writes. A DSB instruction ensures that no instructions that appear in program order after the DSB instruction, can execute until the DSB instruction has completed. Cc: stable@vger.kernel.org Acked-by: Will Deacon , Signed-off-by: Shanker Donthineni Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index d71be9a1f9d2..d99cc07903ec 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -688,7 +688,7 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) * Ensure that stores to Normal memory are visible to the * other CPUs before issuing the IPI. */ - smp_wmb(); + wmb(); for_each_cpu(cpu, mask) { u64 cluster_id = MPIDR_TO_SGI_CLUSTER_ID(cpu_logical_map(cpu)); -- cgit v1.2.3 From 95a2562590c2f64a0398183f978d5cf3db6d0284 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 1 Feb 2018 09:03:29 -0800 Subject: irqchip/gic-v3: Ignore disabled ITS nodes On some platforms there's an ITS available but it's not enabled because reading or writing the registers is denied by the firmware. In fact, reading or writing them will cause the system to reset. We could remove the node from DT in such a case, but it's better to skip nodes that are marked as "disabled" in DT so that we can describe the hardware that exists and use the status property to indicate how the firmware has configured things. Cc: Stuart Yoder Cc: Laurentiu Tudor Cc: Greg Kroah-Hartman Cc: Marc Zyngier Cc: Rajendra Nayak Signed-off-by: Stephen Boyd Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3-its-pci-msi.c | 2 ++ drivers/irqchip/irq-gic-v3-its-platform-msi.c | 2 ++ drivers/irqchip/irq-gic-v3-its.c | 2 ++ drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c | 2 ++ 4 files changed, 8 insertions(+) diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c index 14a8c0a7e095..25a98de5cfb2 100644 --- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c +++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c @@ -132,6 +132,8 @@ static int __init its_pci_of_msi_init(void) for (np = of_find_matching_node(NULL, its_device_id); np; np = of_find_matching_node(np, its_device_id)) { + if (!of_device_is_available(np)) + continue; if (!of_property_read_bool(np, "msi-controller")) continue; diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c index 833a90fe33ae..8881a053c173 100644 --- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c +++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c @@ -154,6 +154,8 @@ static void __init its_pmsi_of_init(void) for (np = of_find_matching_node(NULL, its_device_id); np; np = of_find_matching_node(np, its_device_id)) { + if (!of_device_is_available(np)) + continue; if (!of_property_read_bool(np, "msi-controller")) continue; diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 06f025fd5726..1d3056f53747 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -3314,6 +3314,8 @@ static int __init its_of_probe(struct device_node *node) for (np = of_find_matching_node(node, its_device_id); np; np = of_find_matching_node(np, its_device_id)) { + if (!of_device_is_available(np)) + continue; if (!of_property_read_bool(np, "msi-controller")) { pr_warn("%pOF: no msi-controller property, ITS ignored\n", np); diff --git a/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c b/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c index 5064d5ddf581..fc2013aade51 100644 --- a/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c +++ b/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c @@ -73,6 +73,8 @@ static int __init its_fsl_mc_msi_init(void) for (np = of_find_matching_node(NULL, its_device_id); np; np = of_find_matching_node(np, its_device_id)) { + if (!of_device_is_available(np)) + continue; if (!of_property_read_bool(np, "msi-controller")) continue; -- cgit v1.2.3 From de337ee301422756dff43d6c60fbb0400c1235e9 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Feb 2018 18:55:33 +0000 Subject: irqchip/gic-v2m: Add PCI Multi-MSI support We'd never implemented Multi-MSI support with GICv2m, because it is weird and clunky, and you'd think people would rather use MSI-X. Turns out there is still plenty of devices out there that rely on Multi-MSI. Oh well, let's teach that trick to the v2m widget, it is not a big deal anyway. Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v2m.c | 46 +++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 24 deletions(-) diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c index 993a8426a453..1ff38aff9f29 100644 --- a/drivers/irqchip/irq-gic-v2m.c +++ b/drivers/irqchip/irq-gic-v2m.c @@ -94,7 +94,7 @@ static struct irq_chip gicv2m_msi_irq_chip = { static struct msi_domain_info gicv2m_msi_domain_info = { .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | - MSI_FLAG_PCI_MSIX), + MSI_FLAG_PCI_MSIX | MSI_FLAG_MULTI_PCI_MSI), .chip = &gicv2m_msi_irq_chip, }; @@ -155,18 +155,12 @@ static int gicv2m_irq_gic_domain_alloc(struct irq_domain *domain, return 0; } -static void gicv2m_unalloc_msi(struct v2m_data *v2m, unsigned int hwirq) +static void gicv2m_unalloc_msi(struct v2m_data *v2m, unsigned int hwirq, + int nr_irqs) { - int pos; - - pos = hwirq - v2m->spi_start; - if (pos < 0 || pos >= v2m->nr_spis) { - pr_err("Failed to teardown msi. Invalid hwirq %d\n", hwirq); - return; - } - spin_lock(&v2m_lock); - __clear_bit(pos, v2m->bm); + bitmap_release_region(v2m->bm, hwirq - v2m->spi_start, + get_count_order(nr_irqs)); spin_unlock(&v2m_lock); } @@ -174,13 +168,13 @@ static int gicv2m_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs, void *args) { struct v2m_data *v2m = NULL, *tmp; - int hwirq, offset, err = 0; + int hwirq, offset, i, err = 0; spin_lock(&v2m_lock); list_for_each_entry(tmp, &v2m_nodes, entry) { - offset = find_first_zero_bit(tmp->bm, tmp->nr_spis); - if (offset < tmp->nr_spis) { - __set_bit(offset, tmp->bm); + offset = bitmap_find_free_region(tmp->bm, tmp->nr_spis, + get_count_order(nr_irqs)); + if (offset >= 0) { v2m = tmp; break; } @@ -192,16 +186,21 @@ static int gicv2m_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, hwirq = v2m->spi_start + offset; - err = gicv2m_irq_gic_domain_alloc(domain, virq, hwirq); - if (err) { - gicv2m_unalloc_msi(v2m, hwirq); - return err; - } + for (i = 0; i < nr_irqs; i++) { + err = gicv2m_irq_gic_domain_alloc(domain, virq + i, hwirq + i); + if (err) + goto fail; - irq_domain_set_hwirq_and_chip(domain, virq, hwirq, - &gicv2m_irq_chip, v2m); + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &gicv2m_irq_chip, v2m); + } return 0; + +fail: + irq_domain_free_irqs_parent(domain, virq, nr_irqs); + gicv2m_unalloc_msi(v2m, hwirq, get_count_order(nr_irqs)); + return err; } static void gicv2m_irq_domain_free(struct irq_domain *domain, @@ -210,8 +209,7 @@ static void gicv2m_irq_domain_free(struct irq_domain *domain, struct irq_data *d = irq_domain_get_irq_data(domain, virq); struct v2m_data *v2m = irq_data_get_irq_chip_data(d); - BUG_ON(nr_irqs != 1); - gicv2m_unalloc_msi(v2m, d->hwirq); + gicv2m_unalloc_msi(v2m, d->hwirq, nr_irqs); irq_domain_free_irqs_parent(domain, virq, nr_irqs); } -- cgit v1.2.3 From 2d02424e89eca71b3fa5e832e6fbe467a413e3d5 Mon Sep 17 00:00:00 2001 From: Jaedon Shin Date: Mon, 12 Feb 2018 11:18:12 +0900 Subject: irqchip/bcm: Remove hashed address printing Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers are being hashed when printed. Displaying the virtual memory at bootup time is not helpful. so delete the prints. Acked-by: Florian Fainelli Signed-off-by: Jaedon Shin Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-bcm7038-l1.c | 3 --- drivers/irqchip/irq-bcm7120-l2.c | 3 --- drivers/irqchip/irq-brcmstb-l2.c | 3 --- 3 files changed, 9 deletions(-) diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c index 55cfb986225b..faf734ff4cf3 100644 --- a/drivers/irqchip/irq-bcm7038-l1.c +++ b/drivers/irqchip/irq-bcm7038-l1.c @@ -339,9 +339,6 @@ int __init bcm7038_l1_of_init(struct device_node *dn, goto out_unmap; } - pr_info("registered BCM7038 L1 intc (mem: 0x%p, IRQs: %d)\n", - intc->cpus[0]->map_base, IRQS_PER_WORD * intc->n_words); - return 0; out_unmap: diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c index 983640eba418..8968e5e93fcb 100644 --- a/drivers/irqchip/irq-bcm7120-l2.c +++ b/drivers/irqchip/irq-bcm7120-l2.c @@ -318,9 +318,6 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn, } } - pr_info("registered %s intc (mem: 0x%p, parent IRQ(s): %d)\n", - intc_name, data->map_base[0], data->num_parent_irqs); - return 0; out_free_domain: diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c index 691d20eb0bec..0e65f609352e 100644 --- a/drivers/irqchip/irq-brcmstb-l2.c +++ b/drivers/irqchip/irq-brcmstb-l2.c @@ -262,9 +262,6 @@ static int __init brcmstb_l2_intc_of_init(struct device_node *np, ct->chip.irq_set_wake = irq_gc_set_wake; } - pr_info("registered L2 intc (mem: 0x%p, parent irq: %d)\n", - base, parent_irq); - return 0; out_free_domain: -- cgit v1.2.3 From 0b24a0bbe2147815d982d9335c41bb10c04f40bc Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 14 Feb 2018 17:47:35 +0200 Subject: irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro ...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Signed-off-by: Andy Shevchenko Signed-off-by: Marc Zyngier --- kernel/irq/irqdomain.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index e6a9c36470ee..82b8b18ee1eb 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -1726,25 +1726,14 @@ static int irq_domain_debug_show(struct seq_file *m, void *p) irq_domain_debug_show_one(m, d, 0); return 0; } - -static int irq_domain_debug_open(struct inode *inode, struct file *file) -{ - return single_open(file, irq_domain_debug_show, inode->i_private); -} - -static const struct file_operations dfs_domain_ops = { - .open = irq_domain_debug_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(irq_domain_debug); static void debugfs_add_domain_dir(struct irq_domain *d) { if (!d->name || !domain_dir || d->debugfs_file) return; d->debugfs_file = debugfs_create_file(d->name, 0444, domain_dir, d, - &dfs_domain_ops); + &irq_domain_debug_fops); } static void debugfs_remove_domain_dir(struct irq_domain *d) @@ -1760,7 +1749,8 @@ void __init irq_domain_debugfs_init(struct dentry *root) if (!domain_dir) return; - debugfs_create_file("default", 0444, domain_dir, NULL, &dfs_domain_ops); + debugfs_create_file("default", 0444, domain_dir, NULL, + &irq_domain_debug_fops); mutex_lock(&irq_domain_mutex); list_for_each_entry(d, &irq_domain_list, link) debugfs_add_domain_dir(d); -- cgit v1.2.3