From c5d6136e10d667965e46f998c01863802f7b89c8 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 10 Oct 2011 06:42:23 +0000 Subject: mlx4_en: fix endianness with blue frame support The doorbell register was being unconditionally swapped. In x86, that meant it was being swapped to BE and written to the descriptor and to memory, depending on the case of blue frame support or writing to doorbell register. On PPC, this meant it was being swapped to LE and then swapped back to BE while writing to the register. But in the blue frame case, it was being written as LE to the descriptor. The fix is not to swap doorbell unconditionally, write it to the register as BE and convert it to BE when writing it to the descriptor. Signed-off-by: Thadeu Lima de Souza Cascardo Reported-by: Richard Hendrickson Cc: Eli Cohen Cc: Yevgeny Petrilin Cc: Benjamin Herrenschmidt Signed-off-by: David S. Miller --- drivers/net/mlx4/en_tx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 6e03de034ac7..f76ab6bf3096 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -172,7 +172,7 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, memset(ring->buf, 0, ring->buf_size); ring->qp_state = MLX4_QP_STATE_RST; - ring->doorbell_qpn = swab32(ring->qp.qpn << 8); + ring->doorbell_qpn = ring->qp.qpn << 8; mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn, ring->cqn, &ring->context); @@ -791,7 +791,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) skb_orphan(skb); if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) { - *(u32 *) (&tx_desc->ctrl.vlan_tag) |= ring->doorbell_qpn; + *(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn); op_own |= htonl((bf_index & 0xffff) << 8); /* Ensure new descirptor hits memory * before setting ownership of this descriptor to HW */ @@ -812,7 +812,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) wmb(); tx_desc->ctrl.owner_opcode = op_own; wmb(); - writel(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL); + iowrite32be(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL); } /* Poll CQ here */ -- cgit v1.2.3 From 134d0f974c55c942541f1663d51fa846257eff2a Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 9 Oct 2011 23:57:36 +0000 Subject: bnx2x: fix cl_id allocation for non-eth clients for NPAR mode There are some consolidations of NPAR configuration when FCoE and iSCSI L2 clients will get the same id, in this case FCoE ring will be non-functional. Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x.h | 18 ++++++++++++------ drivers/net/bnx2x/bnx2x_cmn.h | 2 +- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index e46df5331c55..9a7eb3b36cf3 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -239,13 +239,19 @@ void bnx2x_int_disable(struct bnx2x *bp); * FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X * */ -/* iSCSI L2 */ -#define BNX2X_ISCSI_ETH_CL_ID_IDX 1 -#define BNX2X_ISCSI_ETH_CID 49 +enum { + BNX2X_ISCSI_ETH_CL_ID_IDX, + BNX2X_FCOE_ETH_CL_ID_IDX, + BNX2X_MAX_CNIC_ETH_CL_ID_IDX, +}; -/* FCoE L2 */ -#define BNX2X_FCOE_ETH_CL_ID_IDX 2 -#define BNX2X_FCOE_ETH_CID 50 +#define BNX2X_CNIC_START_ETH_CID 48 +enum { + /* iSCSI L2 */ + BNX2X_ISCSI_ETH_CID = BNX2X_CNIC_START_ETH_CID, + /* FCoE L2 */ + BNX2X_FCOE_ETH_CID, +}; /** Additional rings budgeting */ #ifdef BCM_CNIC diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h index 223bfeebc597..2dc1199239d0 100644 --- a/drivers/net/bnx2x/bnx2x_cmn.h +++ b/drivers/net/bnx2x/bnx2x_cmn.h @@ -1297,7 +1297,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp, static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx) { return bp->cnic_base_cl_id + cl_idx + - (bp->pf_num >> 1) * NON_ETH_CONTEXT_USE; + (bp->pf_num >> 1) * BNX2X_MAX_CNIC_ETH_CL_ID_IDX; } static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp) -- cgit v1.2.3 From cdaf557034bb4397b2c86bb424de1788b134f610 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Sat, 8 Oct 2011 22:34:35 +0000 Subject: gro: refetch inet6_protos[] after pulling ext headers ipv6_gro_receive() doesn't update the protocol ops after pulling the ext headers. It looks like a typo. Signed-off-by: Zheng Yan Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/af_inet6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 3b5669a2582d..d27c797f9f05 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -875,6 +875,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, skb_reset_transport_header(skb); __skb_push(skb, skb_gro_offset(skb)); + ops = rcu_dereference(inet6_protos[proto]); if (!ops || !ops->gro_receive) goto out_unlock; -- cgit v1.2.3 From a3a4bfde8a271df7ee56fcf31b8d907d50e7f216 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 7 Oct 2011 09:28:14 +0000 Subject: mscan: too much data copied to CAN frame due to 16 bit accesses Due to the 16 bit access to mscan registers there's too much data copied to the zero initialized CAN frame when having an odd number of bytes to copy. This patch ensures that only the requested bytes are copied by using an 8 bit access for the remaining byte. Reported-by: Andre Naujoks Signed-off-by: Oliver Hartkopp Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/mscan/mscan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c index 92feac68b66e..4cc6f44c2ba2 100644 --- a/drivers/net/can/mscan/mscan.c +++ b/drivers/net/can/mscan/mscan.c @@ -261,11 +261,13 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev) void __iomem *data = ®s->tx.dsr1_0; u16 *payload = (u16 *)frame->data; - /* It is safe to write into dsr[dlc+1] */ - for (i = 0; i < (frame->can_dlc + 1) / 2; i++) { + for (i = 0; i < frame->can_dlc / 2; i++) { out_be16(data, *payload++); data += 2 + _MSCAN_RESERVED_DSR_SIZE; } + /* write remaining byte if necessary */ + if (frame->can_dlc & 1) + out_8(data, frame->data[frame->can_dlc - 1]); } out_8(®s->tx.dlr, frame->can_dlc); @@ -330,10 +332,13 @@ static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame) void __iomem *data = ®s->rx.dsr1_0; u16 *payload = (u16 *)frame->data; - for (i = 0; i < (frame->can_dlc + 1) / 2; i++) { + for (i = 0; i < frame->can_dlc / 2; i++) { *payload++ = in_be16(data); data += 2 + _MSCAN_RESERVED_DSR_SIZE; } + /* read remaining byte if necessary */ + if (frame->can_dlc & 1) + frame->data[frame->can_dlc - 1] = in_8(data); } out_8(®s->canrflg, MSCAN_RXF); -- cgit v1.2.3