From 4397c98a8a60ba029f2d0051d0cbafe600f05d8c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jun 2010 01:40:52 -0700 Subject: Input: ad7879 - split bus logic out The ad7879 driver is using the old bus method of only supporting one at a time (I2C or SPI). So refactor it like the other input drivers that support multiple busses simultaneously. Signed-off-by: Mike Frysinger Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 37 ++- drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/ad7879-i2c.c | 140 +++++++++ drivers/input/touchscreen/ad7879-spi.c | 190 +++++++++++++ drivers/input/touchscreen/ad7879.c | 500 +++++++-------------------------- drivers/input/touchscreen/ad7879.h | 30 ++ 6 files changed, 484 insertions(+), 415 deletions(-) create mode 100644 drivers/input/touchscreen/ad7879-i2c.c create mode 100644 drivers/input/touchscreen/ad7879-spi.c create mode 100644 drivers/input/touchscreen/ad7879.h diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index e835f04bc0d0..ff18d896ea6d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -55,37 +55,36 @@ config TOUCHSCREEN_AD7877 To compile this driver as a module, choose M here: the module will be called ad7877. -config TOUCHSCREEN_AD7879_I2C - tristate "AD7879 based touchscreens: AD7879-1 I2C Interface" - depends on I2C - select TOUCHSCREEN_AD7879 +config TOUCHSCREEN_AD7879 + tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface" help - Say Y here if you have a touchscreen interface using the - AD7879-1/AD7889-1 controller, and your board-specific - initialization code includes that in its table of I2C devices. + Say Y here if you want to support a touchscreen interface using + the AD7879-1/AD7889-1 controller. - If unsure, say N (but it's safe to say "Y"). + You should select a bus connection too. To compile this driver as a module, choose M here: the module will be called ad7879. +config TOUCHSCREEN_AD7879_I2C + tristate "support I2C bus connection" + depends on TOUCHSCREEN_AD7879 && I2C + help + Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad7879-i2c. + config TOUCHSCREEN_AD7879_SPI - tristate "AD7879 based touchscreens: AD7879 SPI Interface" - depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n - select TOUCHSCREEN_AD7879 + tristate "support SPI bus connection" + depends on TOUCHSCREEN_AD7879 && SPI_MASTER help - Say Y here if you have a touchscreen interface using the - AD7879/AD7889 controller, and your board-specific initialization - code includes that in its table of SPI devices. + Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the - module will be called ad7879. - -config TOUCHSCREEN_AD7879 - tristate - default n + module will be called ad7879-spi. config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 497964a7a214..9efdd4424757 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -9,6 +9,8 @@ wm97xx-ts-y := wm97xx-core.o obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o +obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o +obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c new file mode 100644 index 000000000000..85dfdd27df5a --- /dev/null +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -0,0 +1,140 @@ +/* + * AD7879-1/AD7889-1 touchscreen (I2C bus) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include /* BUS_I2C */ +#include +#include +#include + +#include "ad7879.h" + +#define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */ + +#ifdef CONFIG_PM +static int ad7879_i2c_suspend(struct i2c_client *client, pm_message_t message) +{ + struct ad7879 *ts = i2c_get_clientdata(client); + + ad7879_disable(ts); + + return 0; +} + +static int ad7879_i2c_resume(struct i2c_client *client) +{ + struct ad7879 *ts = i2c_get_clientdata(client); + + ad7879_enable(ts); + + return 0; +} +#else +# define ad7879_i2c_suspend NULL +# define ad7879_i2c_resume NULL +#endif + +/* All registers are word-sized. + * AD7879 uses a high-byte first convention. + */ +static int ad7879_i2c_read(struct device *dev, u8 reg) +{ + struct i2c_client *client = to_i2c_client(dev); + + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +static int ad7879_i2c_multi_read(struct device *dev, + u8 first_reg, u8 count, u16 *buf) +{ + u8 idx; + + for (idx = 0; idx < count; ++idx) + buf[idx] = ad7879_i2c_read(dev, first_reg + idx); + + return 0; +} + +static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val) +{ + struct i2c_client *client = to_i2c_client(dev); + + return i2c_smbus_write_word_data(client, reg, swab16(val)); +} + +static const struct ad7879_bus_ops ad7879_i2c_bus_ops = { + .bustype = BUS_I2C, + .read = ad7879_i2c_read, + .multi_read = ad7879_i2c_multi_read, + .write = ad7879_i2c_write, +}; + +static int __devinit ad7879_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ad7879 *ts; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_err(&client->dev, "SMBUS Word Data not Supported\n"); + return -EIO; + } + + ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq, + &ad7879_i2c_bus_ops); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + i2c_set_clientdata(client, ts); + + return 0; +} + +static int __devexit ad7879_i2c_remove(struct i2c_client *client) +{ + struct ad7879 *ts = i2c_get_clientdata(client); + + ad7879_remove(ts); + + return 0; +} + +static const struct i2c_device_id ad7879_id[] = { + { "ad7879", 0 }, + { "ad7889", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7879_id); + +static struct i2c_driver ad7879_i2c_driver = { + .driver = { + .name = "ad7879", + .owner = THIS_MODULE, + }, + .probe = ad7879_i2c_probe, + .remove = __devexit_p(ad7879_i2c_remove), + .suspend = ad7879_i2c_suspend, + .resume = ad7879_i2c_resume, + .id_table = ad7879_id, +}; + +static int __init ad7879_i2c_init(void) +{ + return i2c_add_driver(&ad7879_i2c_driver); +} +module_init(ad7879_i2c_init); + +static void __exit ad7879_i2c_exit(void) +{ + i2c_del_driver(&ad7879_i2c_driver); +} +module_exit(ad7879_i2c_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:ad7879"); diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c new file mode 100644 index 000000000000..5d1e5a050332 --- /dev/null +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -0,0 +1,190 @@ +/* + * AD7879/AD7889 touchscreen (SPI bus) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include /* BUS_SPI */ +#include + +#include "ad7879.h" + +#define AD7879_DEVID 0x7A /* AD7879/AD7889 */ + +#define MAX_SPI_FREQ_HZ 5000000 +#define AD7879_CMD_MAGIC 0xE000 +#define AD7879_CMD_READ (1 << 10) +#define AD7879_CMD(reg) (AD7879_CMD_MAGIC | ((reg) & 0xF)) +#define AD7879_WRITECMD(reg) (AD7879_CMD(reg)) +#define AD7879_READCMD(reg) (AD7879_CMD(reg) | AD7879_CMD_READ) + +#ifdef CONFIG_PM +static int ad7879_spi_suspend(struct spi_device *spi, pm_message_t message) +{ + struct ad7879 *ts = spi_get_drvdata(spi); + + ad7879_disable(ts); + + return 0; +} + +static int ad7879_spi_resume(struct spi_device *spi) +{ + struct ad7879 *ts = spi_get_drvdata(spi); + + ad7879_enable(ts); + + return 0; +} +#else +# define ad7879_spi_suspend NULL +# define ad7879_spi_resume NULL +#endif + +/* + * ad7879_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done in ad7879_collect(). + */ + +static int ad7879_spi_xfer(struct spi_device *spi, + u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf) +{ + struct spi_message msg; + struct spi_transfer *xfers; + void *spi_data; + u16 *command; + u16 *_rx_buf = _rx_buf; /* shut gcc up */ + u8 idx; + int ret; + + xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL); + if (!spi_data) + return -ENOMEM; + + spi_message_init(&msg); + + command = spi_data; + command[0] = cmd; + if (count == 1) { + /* ad7879_spi_{read,write} gave us buf on stack */ + command[1] = *tx_buf; + tx_buf = &command[1]; + _rx_buf = rx_buf; + rx_buf = &command[2]; + } + + ++xfers; + xfers[0].tx_buf = command; + xfers[0].len = 2; + spi_message_add_tail(&xfers[0], &msg); + ++xfers; + + for (idx = 0; idx < count; ++idx) { + if (rx_buf) + xfers[idx].rx_buf = &rx_buf[idx]; + if (tx_buf) + xfers[idx].tx_buf = &tx_buf[idx]; + xfers[idx].len = 2; + spi_message_add_tail(&xfers[idx], &msg); + } + + ret = spi_sync(spi, &msg); + + if (count == 1) + _rx_buf[0] = command[2]; + + kfree(spi_data); + + return ret; +} + +static int ad7879_spi_multi_read(struct device *dev, + u8 first_reg, u8 count, u16 *buf) +{ + struct spi_device *spi = to_spi_device(dev); + + return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf); +} + +static int ad7879_spi_read(struct device *dev, u8 reg) +{ + struct spi_device *spi = to_spi_device(dev); + u16 ret, dummy; + + return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret; +} + +static int ad7879_spi_write(struct device *dev, u8 reg, u16 val) +{ + struct spi_device *spi = to_spi_device(dev); + u16 dummy; + + return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy); +} + +static const struct ad7879_bus_ops ad7879_spi_bus_ops = { + .bustype = BUS_SPI, + .read = ad7879_spi_read, + .multi_read = ad7879_spi_multi_read, + .write = ad7879_spi_write, +}; + +static int __devinit ad7879_spi_probe(struct spi_device *spi) +{ + struct ad7879 *ts; + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); + return -EINVAL; + } + + ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + spi_set_drvdata(spi, ts); + + return 0; +} + +static int __devexit ad7879_spi_remove(struct spi_device *spi) +{ + struct ad7879 *ts = spi_get_drvdata(spi); + + ad7879_remove(ts); + spi_set_drvdata(spi, NULL); + + return 0; +} + +static struct spi_driver ad7879_spi_driver = { + .driver = { + .name = "ad7879", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7879_spi_probe, + .remove = __devexit_p(ad7879_spi_remove), + .suspend = ad7879_spi_suspend, + .resume = ad7879_spi_resume, +}; + +static int __init ad7879_spi_init(void) +{ + return spi_register_driver(&ad7879_spi_driver); +} +module_init(ad7879_spi_init); + +static void __exit ad7879_spi_exit(void) +{ + spi_unregister_driver(&ad7879_spi_driver); +} +module_exit(ad7879_spi_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ad7879"); diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index f947457c858b..1de19691c4a3 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -1,25 +1,9 @@ /* - * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc. + * AD7879/AD7889 based touchscreen and GPIO driver * - * Description: AD7879/AD7889 based touchscreen, and GPIO driver - * (I2C/SPI Interface) + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. * * History: * Copyright (c) 2005 David Brownell @@ -49,6 +33,7 @@ #include #include +#include "ad7879.h" #define AD7879_REG_ZEROS 0 #define AD7879_REG_CTRL1 1 @@ -119,29 +104,18 @@ enum { #define MAX_12BIT ((1<<12)-1) #define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -#define AD7879_DEVID 0x7A -typedef struct spi_device bus_device; -#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) -#define AD7879_DEVID 0x79 -typedef struct i2c_client bus_device; -#endif - struct ad7879 { - bus_device *bus; + const struct ad7879_bus_ops *bops; + + struct device *dev; struct input_dev *input; struct timer_list timer; #ifdef CONFIG_GPIOLIB struct gpio_chip gc; #endif + unsigned int irq; struct mutex mutex; bool disabled; /* P: mutex */ - -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) - struct spi_message msg; - struct spi_transfer xfer[AD7879_NR_SENSE + 1]; - u16 cmd; -#endif u16 conversion_data[AD7879_NR_SENSE]; char phys[32]; u8 first_conversion_delay; @@ -156,9 +130,20 @@ struct ad7879 { u16 cmd_crtl3; }; -static int ad7879_read(bus_device *, u8); -static int ad7879_write(bus_device *, u8, u16); -static void ad7879_collect(struct ad7879 *); +static int ad7879_read(struct ad7879 *ts, u8 reg) +{ + return ts->bops->read(ts->dev, reg); +} + +static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf) +{ + return ts->bops->multi_read(ts->dev, first_reg, count, buf); +} + +static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val) +{ + return ts->bops->write(ts->dev, reg, val); +} static void ad7879_report(struct ad7879 *ts) { @@ -173,12 +158,14 @@ static void ad7879_report(struct ad7879 *ts) /* * The samples processed here are already preprocessed by the AD7879. - * The preprocessing function consists of a median and an averaging filter. - * The combination of these two techniques provides a robust solution, - * discarding the spurious noise in the signal and keeping only the data of interest. - * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h) - * Other user-programmable conversion controls include variable acquisition time, - * and first conversion delay. Up to 16 averages can be taken per conversion. + * The preprocessing function consists of a median and an averaging + * filter. The combination of these two techniques provides a robust + * solution, discarding the spurious noise in the signal and keeping + * only the data of interest. The size of both filters is + * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other + * user-programmable conversion controls include variable acquisition + * time, and first conversion delay. Up to 16 averages can be taken + * per conversion. */ if (likely(x && z1)) { @@ -213,7 +200,7 @@ static irqreturn_t ad7879_irq(int irq, void *handle) { struct ad7879 *ts = handle; - ad7879_collect(ts); + ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data); ad7879_report(ts); mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); @@ -223,42 +210,44 @@ static irqreturn_t ad7879_irq(int irq, void *handle) static void ad7879_setup(struct ad7879 *ts) { - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); - ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); - ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); + ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts, AD7879_REG_CTRL3, ts->cmd_crtl3); + ad7879_write(ts, AD7879_REG_CTRL1, ts->cmd_crtl1); } -static void ad7879_disable(struct ad7879 *ts) +void ad7879_disable(struct ad7879 *ts) { mutex_lock(&ts->mutex); if (!ts->disabled) { ts->disabled = true; - disable_irq(ts->bus->irq); + disable_irq(ts->irq); if (del_timer_sync(&ts->timer)) ad7879_ts_event_release(ts); - ad7879_write(ts->bus, AD7879_REG_CTRL2, + ad7879_write(ts, AD7879_REG_CTRL2, AD7879_PM(AD7879_PM_SHUTDOWN)); } mutex_unlock(&ts->mutex); } +EXPORT_SYMBOL(ad7879_disable); -static void ad7879_enable(struct ad7879 *ts) +void ad7879_enable(struct ad7879 *ts) { mutex_lock(&ts->mutex); if (ts->disabled) { ad7879_setup(ts); ts->disabled = false; - enable_irq(ts->bus->irq); + enable_irq(ts->irq); } mutex_unlock(&ts->mutex); } +EXPORT_SYMBOL(ad7879_enable); static ssize_t ad7879_disable_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -308,7 +297,7 @@ static int ad7879_gpio_direction_input(struct gpio_chip *chip, mutex_lock(&ts->mutex); ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; - err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); mutex_unlock(&ts->mutex); return err; @@ -328,7 +317,7 @@ static int ad7879_gpio_direction_output(struct gpio_chip *chip, else ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; - err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); mutex_unlock(&ts->mutex); return err; @@ -340,7 +329,7 @@ static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) u16 val; mutex_lock(&ts->mutex); - val = ad7879_read(ts->bus, AD7879_REG_CTRL2); + val = ad7879_read(ts, AD7879_REG_CTRL2); mutex_unlock(&ts->mutex); return !!(val & AD7879_GPIO_DATA); @@ -357,14 +346,13 @@ static void ad7879_gpio_set_value(struct gpio_chip *chip, else ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); mutex_unlock(&ts->mutex); } -static int __devinit ad7879_gpio_add(struct device *dev) +static int ad7879_gpio_add(struct ad7879 *ts, + const struct ad7879_platform_data *pdata) { - struct ad7879 *ts = dev_get_drvdata(dev); - struct ad7879_platform_data *pdata = dev->platform_data; int ret = 0; if (pdata->gpio_export) { @@ -377,72 +365,78 @@ static int __devinit ad7879_gpio_add(struct device *dev) ts->gc.ngpio = 1; ts->gc.label = "AD7879-GPIO"; ts->gc.owner = THIS_MODULE; - ts->gc.dev = dev; + ts->gc.dev = ts->dev; ret = gpiochip_add(&ts->gc); if (ret) - dev_err(dev, "failed to register gpio %d\n", + dev_err(ts->dev, "failed to register gpio %d\n", ts->gc.base); } return ret; } -/* - * We mark ad7879_gpio_remove inline so there is a chance the code - * gets discarded when not needed. We can't do __devinit/__devexit - * markup since it is used in both probe and remove methods. - */ -static inline void ad7879_gpio_remove(struct device *dev) +static void ad7879_gpio_remove(struct ad7879 *ts) { - struct ad7879 *ts = dev_get_drvdata(dev); - struct ad7879_platform_data *pdata = dev->platform_data; + const struct ad7879_platform_data *pdata = ts->dev->platform_data; int ret; if (pdata->gpio_export) { ret = gpiochip_remove(&ts->gc); if (ret) - dev_err(dev, "failed to remove gpio %d\n", + dev_err(ts->dev, "failed to remove gpio %d\n", ts->gc.base); } } #else -static inline int ad7879_gpio_add(struct device *dev) +static inline int ad7879_gpio_add(struct ad7879 *ts, + const struct ad7879_platform_data *pdata) { return 0; } -static inline void ad7879_gpio_remove(struct device *dev) +static inline void ad7879_gpio_remove(struct ad7879 *ts) { } #endif -static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) +struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, + const struct ad7879_bus_ops *bops) { + struct ad7879_platform_data *pdata = dev->platform_data; + struct ad7879 *ts; struct input_dev *input_dev; - struct ad7879_platform_data *pdata = bus->dev.platform_data; int err; u16 revid; - if (!bus->irq) { - dev_err(&bus->dev, "no IRQ?\n"); - return -ENODEV; + if (!irq) { + dev_err(dev, "no IRQ?\n"); + err = -EINVAL; + goto err_out; } if (!pdata) { - dev_err(&bus->dev, "no platform data?\n"); - return -ENODEV; + dev_err(dev, "no platform data?\n"); + err = -EINVAL; + goto err_out; } + ts = kzalloc(sizeof(*ts), GFP_KERNEL); input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + ts->bops = bops; + ts->dev = dev; ts->input = input_dev; setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); mutex_init(&ts->mutex); + ts->irq = irq; + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; ts->pressure_max = pdata->pressure_max ? : ~0; @@ -452,11 +446,12 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ts->pen_down_acc_interval = pdata->pen_down_acc_interval; ts->median = pdata->median; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); input_dev->name = "AD7879 Touchscreen"; input_dev->phys = ts->phys; - input_dev->dev.parent = &bus->dev; + input_dev->dev.parent = dev; + input_dev->id.bustype = bops->bustype; __set_bit(EV_ABS, input_dev->evbit); __set_bit(ABS_X, input_dev->absbit); @@ -474,17 +469,18 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) input_set_abs_params(input_dev, ABS_PRESSURE, pdata->pressure_min, pdata->pressure_max, 0, 0); - err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET); - + err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET); if (err < 0) { - dev_err(&bus->dev, "Failed to write %s\n", input_dev->name); + dev_err(dev, "Failed to write %s\n", input_dev->name); goto err_free_mem; } - revid = ad7879_read(bus, AD7879_REG_REVID); - - if ((revid & 0xFF) != AD7879_DEVID) { - dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name); + revid = ad7879_read(ts, AD7879_REG_REVID); + input_dev->id.product = (revid & 0xff); + input_dev->id.version = revid >> 8; + if (input_dev->id.product != devid) { + dev_err(dev, "Failed to probe %s (%x vs %x)\n", + input_dev->name, devid, revid); err = -ENODEV; goto err_free_mem; } @@ -508,19 +504,19 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ad7879_setup(ts); - err = request_threaded_irq(bus->irq, NULL, ad7879_irq, + err = request_threaded_irq(ts->irq, NULL, ad7879_irq, IRQF_TRIGGER_FALLING, - bus->dev.driver->name, ts); + dev_name(dev), ts); if (err) { - dev_err(&bus->dev, "irq %d busy?\n", bus->irq); + dev_err(dev, "irq %d busy?\n", ts->irq); goto err_free_mem; } - err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group); + err = sysfs_create_group(&dev->kobj, &ad7879_attr_group); if (err) goto err_free_irq; - err = ad7879_gpio_add(&bus->dev); + err = ad7879_gpio_add(ts, pdata); if (err) goto err_remove_attr; @@ -528,321 +524,33 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) if (err) goto err_remove_gpio; - dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", - revid >> 8, bus->irq); - - return 0; + return ts; err_remove_gpio: - ad7879_gpio_remove(&bus->dev); + ad7879_gpio_remove(ts); err_remove_attr: - sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); + sysfs_remove_group(&dev->kobj, &ad7879_attr_group); err_free_irq: - free_irq(bus->irq, ts); + free_irq(ts->irq, ts); err_free_mem: input_free_device(input_dev); - - return err; + kfree(ts); +err_out: + return ERR_PTR(err); } +EXPORT_SYMBOL(ad7879_probe); -static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) +void ad7879_remove(struct ad7879 *ts) { - ad7879_gpio_remove(&bus->dev); + ad7879_gpio_remove(ts); ad7879_disable(ts); - sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); - free_irq(ts->bus->irq, ts); + sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group); + free_irq(ts->irq, ts); input_unregister_device(ts->input); - dev_dbg(&bus->dev, "unregistered touchscreen\n"); - - return 0; -} - -#ifdef CONFIG_PM -static int ad7879_suspend(bus_device *bus, pm_message_t message) -{ - struct ad7879 *ts = dev_get_drvdata(&bus->dev); - - ad7879_disable(ts); - - return 0; -} - -static int ad7879_resume(bus_device *bus) -{ - struct ad7879 *ts = dev_get_drvdata(&bus->dev); - - ad7879_enable(ts); - - return 0; -} -#else -#define ad7879_suspend NULL -#define ad7879_resume NULL -#endif - -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -#define MAX_SPI_FREQ_HZ 5000000 -#define AD7879_CMD_MAGIC 0xE000 -#define AD7879_CMD_READ (1 << 10) -#define AD7879_WRITECMD(reg) (AD7879_CMD_MAGIC | (reg & 0xF)) -#define AD7879_READCMD(reg) (AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF)) - -struct ser_req { - u16 command; - u16 data; - struct spi_message msg; - struct spi_transfer xfer[2]; -}; - -/* - * ad7879_read/write are only used for initial setup and for sysfs controls. - * The main traffic is done in ad7879_collect(). - */ - -static int ad7879_read(struct spi_device *spi, u8 reg) -{ - struct ser_req *req; - int status, ret; - - req = kzalloc(sizeof *req, GFP_KERNEL); - if (!req) - return -ENOMEM; - - spi_message_init(&req->msg); - - req->command = (u16) AD7879_READCMD(reg); - req->xfer[0].tx_buf = &req->command; - req->xfer[0].len = 2; - - req->xfer[1].rx_buf = &req->data; - req->xfer[1].len = 2; - - spi_message_add_tail(&req->xfer[0], &req->msg); - spi_message_add_tail(&req->xfer[1], &req->msg); - - status = spi_sync(spi, &req->msg); - ret = status ? : req->data; - - kfree(req); - - return ret; -} - -static int ad7879_write(struct spi_device *spi, u8 reg, u16 val) -{ - struct ser_req *req; - int status; - - req = kzalloc(sizeof *req, GFP_KERNEL); - if (!req) - return -ENOMEM; - - spi_message_init(&req->msg); - - req->command = (u16) AD7879_WRITECMD(reg); - req->xfer[0].tx_buf = &req->command; - req->xfer[0].len = 2; - - req->data = val; - req->xfer[1].tx_buf = &req->data; - req->xfer[1].len = 2; - - spi_message_add_tail(&req->xfer[0], &req->msg); - spi_message_add_tail(&req->xfer[1], &req->msg); - - status = spi_sync(spi, &req->msg); - - kfree(req); - - return status; -} - -static void ad7879_collect(struct ad7879 *ts) -{ - int status = spi_sync(ts->bus, &ts->msg); - - if (status) - dev_err(&ts->bus->dev, "spi_sync --> %d\n", status); -} - -static void ad7879_setup_ts_def_msg(struct ad7879 *ts) -{ - struct spi_message *m; - int i; - - ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS); - - m = &ts->msg; - spi_message_init(m); - ts->xfer[0].tx_buf = &ts->cmd; - ts->xfer[0].len = 2; - - spi_message_add_tail(&ts->xfer[0], m); - - for (i = 0; i < AD7879_NR_SENSE; i++) { - ts->xfer[i + 1].rx_buf = &ts->conversion_data[i]; - ts->xfer[i + 1].len = 2; - spi_message_add_tail(&ts->xfer[i + 1], m); - } -} - -static int __devinit ad7879_probe(struct spi_device *spi) -{ - struct ad7879 *ts; - int error; - - /* don't exceed max specified SPI CLK frequency */ - if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { - dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); - return -EINVAL; - } - - ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); - if (!ts) - return -ENOMEM; - - dev_set_drvdata(&spi->dev, ts); - ts->bus = spi; - - ad7879_setup_ts_def_msg(ts); - - error = ad7879_construct(spi, ts); - if (error) { - dev_set_drvdata(&spi->dev, NULL); - kfree(ts); - } - - return error; -} - -static int __devexit ad7879_remove(struct spi_device *spi) -{ - struct ad7879 *ts = dev_get_drvdata(&spi->dev); - - ad7879_destroy(spi, ts); - dev_set_drvdata(&spi->dev, NULL); kfree(ts); - - return 0; } - -static struct spi_driver ad7879_driver = { - .driver = { - .name = "ad7879", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = ad7879_probe, - .remove = __devexit_p(ad7879_remove), - .suspend = ad7879_suspend, - .resume = ad7879_resume, -}; - -static int __init ad7879_init(void) -{ - return spi_register_driver(&ad7879_driver); -} -module_init(ad7879_init); - -static void __exit ad7879_exit(void) -{ - spi_unregister_driver(&ad7879_driver); -} -module_exit(ad7879_exit); - -#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) - -/* All registers are word-sized. - * AD7879 uses a high-byte first convention. - */ -static int ad7879_read(struct i2c_client *client, u8 reg) -{ - return swab16(i2c_smbus_read_word_data(client, reg)); -} - -static int ad7879_write(struct i2c_client *client, u8 reg, u16 val) -{ - return i2c_smbus_write_word_data(client, reg, swab16(val)); -} - -static void ad7879_collect(struct ad7879 *ts) -{ - int i; - - for (i = 0; i < AD7879_NR_SENSE; i++) - ts->conversion_data[i] = ad7879_read(ts->bus, - AD7879_REG_XPLUS + i); -} - -static int __devinit ad7879_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ad7879 *ts; - int error; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_WORD_DATA)) { - dev_err(&client->dev, "SMBUS Word Data not Supported\n"); - return -EIO; - } - - ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); - if (!ts) - return -ENOMEM; - - i2c_set_clientdata(client, ts); - ts->bus = client; - - error = ad7879_construct(client, ts); - if (error) - kfree(ts); - - return error; -} - -static int __devexit ad7879_remove(struct i2c_client *client) -{ - struct ad7879 *ts = dev_get_drvdata(&client->dev); - - ad7879_destroy(client, ts); - kfree(ts); - - return 0; -} - -static const struct i2c_device_id ad7879_id[] = { - { "ad7879", 0 }, - { "ad7889", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ad7879_id); - -static struct i2c_driver ad7879_driver = { - .driver = { - .name = "ad7879", - .owner = THIS_MODULE, - }, - .probe = ad7879_probe, - .remove = __devexit_p(ad7879_remove), - .suspend = ad7879_suspend, - .resume = ad7879_resume, - .id_table = ad7879_id, -}; - -static int __init ad7879_init(void) -{ - return i2c_add_driver(&ad7879_driver); -} -module_init(ad7879_init); - -static void __exit ad7879_exit(void) -{ - i2c_del_driver(&ad7879_driver); -} -module_exit(ad7879_exit); -#endif +EXPORT_SYMBOL(ad7879_remove); MODULE_AUTHOR("Michael Hennerich "); MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:ad7879"); diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h new file mode 100644 index 000000000000..169f155db3b9 --- /dev/null +++ b/drivers/input/touchscreen/ad7879.h @@ -0,0 +1,30 @@ +/* + * AD7879/AD7889 touchscreen (bus interfaces) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _AD7879_H_ +#define _AD7879_H_ + +#include + +struct ad7879; +struct device; + +struct ad7879_bus_ops { + u16 bustype; + int (*read)(struct device *dev, u8 reg); + int (*multi_read)(struct device *dev, u8 first_reg, u8 count, u16 *buf); + int (*write)(struct device *dev, u8 reg, u16 val); +}; + +void ad7879_disable(struct ad7879 *); +void ad7879_enable(struct ad7879 *); +struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq, + const struct ad7879_bus_ops *bops); +void ad7879_remove(struct ad7879 *); + +#endif -- cgit v1.2.3