From 7eac0081a8e958106ed3aea402c8105f30fad6d9 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 10 Aug 2022 09:59:15 +0100 Subject: riscv: dts: microchip: add qspi compatible fallback The "hard" QSPI peripheral on PolarFire SoC is derived from version 2 of the FPGA IP core. The original binding had no fallback etc, so this device tree is valid as is. There was also no functional driver for the QSPI IP, so no device with a devicetree from a previous mainline release will regress. Link: https://lore.kernel.org/linux-spi/7c9f0d96-2882-964a-cd1f-916ddb3f0410@linaro.org/ Signed-off-by: Conor Dooley Acked-by: Krzysztof Kozlowski --- arch/riscv/boot/dts/microchip/mpfs.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 499c2e63ad35..45e3cc659882 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -330,7 +330,7 @@ }; qspi: spi@21000000 { - compatible = "microchip,mpfs-qspi"; + compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21000000 0x0 0x1000>; -- cgit v1.2.3 From 7ab72c597356be1e7f0f3d856e54ce78527f43c8 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Thu, 15 Sep 2022 15:37:01 -0400 Subject: riscv: Make VM_WRITE imply VM_READ RISC-V does not presently have write-only mappings as that PTE bit pattern is considered reserved in the privileged spec, so allow handling of read faults in VMAs that have VM_WRITE without VM_READ in order to be consistent with other architectures that have similar limitations. Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") Reviewed-by: Atish Patra Signed-off-by: Andrew Bresticker Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/fault.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/riscv/mm/fault.c b/arch/riscv/mm/fault.c index f2fbd1400b7c..d86f7cebd4a7 100644 --- a/arch/riscv/mm/fault.c +++ b/arch/riscv/mm/fault.c @@ -184,7 +184,8 @@ static inline bool access_error(unsigned long cause, struct vm_area_struct *vma) } break; case EXC_LOAD_PAGE_FAULT: - if (!(vma->vm_flags & VM_READ)) { + /* Write implies read */ + if (!(vma->vm_flags & (VM_READ | VM_WRITE))) { return true; } break; -- cgit v1.2.3 From 9e2e6042a7ec6504fe8e366717afa2f40cf16488 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Thu, 15 Sep 2022 15:37:02 -0400 Subject: riscv: Allow PROT_WRITE-only mmap() Commit 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout PROT_READ with the justification that a write-only PTE is considered a reserved PTE permission bit pattern in the privileged spec. This check is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is inconsistent with other architectures that don't support write-only PTEs, creating a potential software portability issue. Just remove the check altogether and let PROT_WRITE imply PROT_READ as is the case on other architectures. Note that this also allows PROT_WRITE|PROT_EXEC mappings which were disallowed prior to the aforementioned commit; PROT_READ is implied in such mappings as well. Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") Reviewed-by: Atish Patra Signed-off-by: Andrew Bresticker Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/sys_riscv.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c index 571556bb9261..5d3f2fbeb33c 100644 --- a/arch/riscv/kernel/sys_riscv.c +++ b/arch/riscv/kernel/sys_riscv.c @@ -18,9 +18,6 @@ static long riscv_sys_mmap(unsigned long addr, unsigned long len, if (unlikely(offset & (~PAGE_MASK >> page_shift_offset))) return -EINVAL; - if (unlikely((prot & PROT_WRITE) && !(prot & PROT_READ))) - return -EINVAL; - return ksys_mmap_pgoff(addr, len, prot, flags, fd, offset >> (PAGE_SHIFT - page_shift_offset)); } -- cgit v1.2.3 From a0d49a8f77f26609036a05e7832393b6279554db Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:13 +0100 Subject: dt-bindings: riscv: microchip: document icicle reference design The icicle kit reference design's v2022.09 release made some changes to the memory map - including adding the ability to read the fabric clock controllers via the system controller bus & making the PCI controller work with upstream Linux. While the PCI was not working in the v2022.03 design, so nothing is broken there in terms of backwards compatibility, the fabric clocks used in the v2022.03 design were chosen by the individual run of the synthesis tool. In the v2022.09 reference design, the clocks are fixed to use the "north west" fabric Clock Conditioning Circuitry. In the v2022.10 release, the memory map on the DDR side is also changing, so to avoid making a breaking change here twice, jump over the v2022.09 release and straight to the v2022.10 one. Make use of a new compatible to denote that v2022.{09,10} reference design releases are not backwards compatible. Acked-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley --- Documentation/devicetree/bindings/riscv/microchip.yaml | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 1aa7336a9672..5c1ad2108049 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -17,12 +17,18 @@ properties: $nodename: const: '/' compatible: - items: - - enum: - - microchip,mpfs-icicle-kit - - microchip,mpfs-icicle-reference-rtlv2203 - - sundance,polarberry - - const: microchip,mpfs + oneOf: + - items: + - enum: + - microchip,mpfs-icicle-reference-rtlv2203 + - microchip,mpfs-icicle-reference-rtlv2210 + - const: microchip,mpfs-icicle-kit + - const: microchip,mpfs + + - items: + - enum: + - sundance,polarberry + - const: microchip,mpfs additionalProperties: true -- cgit v1.2.3 From 0ebdc51787dbb8ef8d259daa98b8fd35babf8970 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:14 +0100 Subject: dt-bindings: riscv: microchip: document the aries m100pfsevp Add a compatible for the Aries Embedded M100PFSEVP SOM + EVK platform. Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes Signed-off-by: Conor Dooley Acked-by: Rob Herring --- Documentation/devicetree/bindings/riscv/microchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 5c1ad2108049..681cedc5578f 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -27,6 +27,7 @@ properties: - items: - enum: + - aries,m100pfsevp - sundance,polarberry - const: microchip,mpfs -- cgit v1.2.3 From db3d481698efe8a7a943ecbba9491648c5a49ef3 Mon Sep 17 00:00:00 2001 From: Shravan Chippa Date: Tue, 27 Sep 2022 12:19:15 +0100 Subject: dt-bindings: riscv: microchip: document the sev kit Update devicetree bindings document with PolarFire SoC Video Kit, known by its "sev-kit" product code. Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06 Signed-off-by: Shravan Chippa Reviewed-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley --- Documentation/devicetree/bindings/riscv/microchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 681cedc5578f..2b8c6a695e99 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -28,6 +28,7 @@ properties: - items: - enum: - aries,m100pfsevp + - microchip,mpfs-sev-kit - sundance,polarberry - const: microchip,mpfs -- cgit v1.2.3 From f890e67f292db46c9bd5b5c004ba0f98761d1a33 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:16 +0100 Subject: riscv: dts: microchip: add pci dma ranges for the icicle kit The recently removed, accidentally included, "matr0" property was used in place of a dma-ranges property. The PCI controller is non-functional with mainline Linux in the v2022.02 or later reference designs and has not worked without configuration of address-translation since v2021.08. Add the address translation that will be used by the v2022.09 reference design & update the compatible used by the dts. Since this change is not backwards compatible, update the compatible to denote this, jumping over v2022.09 directly to v2022.10. Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 7 ++++++- arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index 0d28858b83f2..eec5aba43436 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -2,7 +2,8 @@ /* Copyright (c) 2020-2021 Microchip Technology Inc */ / { - compatible = "microchip,mpfs-icicle-reference-rtlv2203", "microchip,mpfs"; + compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + "microchip,mpfs"; core_pwm0: pwm@41000000 { compatible = "microchip,corepwm-rtl-v4"; @@ -37,3 +38,7 @@ clock-frequency = <125000000>; }; }; + +&pcie { + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 044982a11df5..42d350fe6c6b 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -11,7 +11,8 @@ / { model = "Microchip PolarFire-SoC Icicle Kit"; - compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; + compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + "microchip,mpfs"; aliases { ethernet0 = &mac1; -- cgit v1.2.3 From 99d451a7db1624308bc9eb94b7befb3722f67b10 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:17 +0100 Subject: riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi In today's edition of moving things around: The PCIe root port on PolarFire SoC is more part of the FPGA than of the Core Complex. It is located on the other side of the chip and, apart from its interrupts, most of its configuration is determined by the FPGA bitstream rather. This includes: - address translation in both directions - the addresses at which the config and data regions appear to the core complex - the clocks used by the AXI bus - the plic interrupt used Moving the PCIe node to the -fabric.dtsi makes it clearer than a singular configuration for root port is not correct & allows the base SoC dtsi to be more easily included. Signed-off-by: Conor Dooley --- .../boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 32 ++++++++++++++++++++-- .../boot/dts/microchip/mpfs-polarberry-fabric.dtsi | 29 ++++++++++++++++++++ arch/riscv/boot/dts/microchip/mpfs.dtsi | 30 -------------------- 3 files changed, 58 insertions(+), 33 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index eec5aba43436..688ef0fc5a64 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -37,8 +37,34 @@ #clock-cells = <0>; clock-frequency = <125000000>; }; -}; -&pcie { - dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>; + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; }; diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi index 49380c428ec9..67303bc0e451 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi @@ -13,4 +13,33 @@ #clock-cells = <0>; clock-frequency = <125000000>; }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; }; diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 45e3cc659882..79fd8dfce96f 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -464,36 +464,6 @@ status = "disabled"; }; - pcie: pcie@2000000000 { - compatible = "microchip,pcie-host-1.0"; - #address-cells = <0x3>; - #interrupt-cells = <0x1>; - #size-cells = <0x2>; - device_type = "pci"; - reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; - reg-names = "cfg", "apb"; - bus-range = <0x0 0x7f>; - interrupt-parent = <&plic>; - interrupts = <119>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - interrupt-map-mask = <0 0 0 7>; - clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; - clock-names = "fic0", "fic1", "fic3"; - ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; - msi-parent = <&pcie>; - msi-controller; - microchip,axi-m-atr0 = <0x10 0x0>; - status = "disabled"; - pcie_intc: legacy-interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - mbox: mailbox@37020000 { compatible = "microchip,mpfs-mailbox"; reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; -- cgit v1.2.3 From 6fc655ed4986f88b91e3f7b339222fc1c4ffba08 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:18 +0100 Subject: riscv: dts: microchip: icicle: update pci address properties For the v2022.09 reference design the PCI root port's data region has been moved to FIC1 from FIC0. This is a shorter path, allowing for higher clock rates and improved through-put. As a result, the address at which the PCIe's data region appears to the core complex has changed. The config region's address is unchanged. As FIC0 is no longer used, its clock can be removed too. Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index 688ef0fc5a64..9ca2ac4ad8e2 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -38,13 +38,13 @@ clock-frequency = <125000000>; }; - pcie: pcie@2000000000 { + pcie: pcie@3000000000 { compatible = "microchip,pcie-host-1.0"; #address-cells = <0x3>; #interrupt-cells = <0x1>; #size-cells = <0x2>; device_type = "pci"; - reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; reg-names = "cfg", "apb"; bus-range = <0x0 0x7f>; interrupt-parent = <&plic>; @@ -54,9 +54,9 @@ <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; interrupt-map-mask = <0 0 0 7>; - clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; - clock-names = "fic0", "fic1", "fic3"; - ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + clocks = <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>; dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>; msi-parent = <&pcie>; msi-controller; -- cgit v1.2.3 From ab291621a8b85269496ae9a964b6d49cd1e030c8 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:19 +0100 Subject: riscv: dts: microchip: icicle: re-jig fabric peripheral addresses When users try to add onto the reference design, they find that the current addresses that peripherals connected to Fabric InterConnect (FIC) 3 use are restrictive. For the v2022.09 reference design, the peripherals have been shifted down, leaving more contiguous address space for their custom IP/peripherals. Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index 9ca2ac4ad8e2..35030ea330ee 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -5,18 +5,18 @@ compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", "microchip,mpfs"; - core_pwm0: pwm@41000000 { + core_pwm0: pwm@40000000 { compatible = "microchip,corepwm-rtl-v4"; - reg = <0x0 0x41000000 0x0 0xF0>; + reg = <0x0 0x40000000 0x0 0xF0>; microchip,sync-update-mask = /bits/ 32 <0>; #pwm-cells = <2>; clocks = <&fabric_clk3>; status = "disabled"; }; - i2c2: i2c@44000000 { + i2c2: i2c@40000200 { compatible = "microchip,corei2c-rtl-v7"; - reg = <0x0 0x44000000 0x0 0x1000>; + reg = <0x0 0x40000200 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; clocks = <&fabric_clk3>; -- cgit v1.2.3 From fa52935abef422d119dda3c10c02787a86e6289d Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:20 +0100 Subject: riscv: dts: microchip: reduce the fic3 clock rate For the v2022.09 release of the reference design, the fic3 clock rate been reduced from 62.5 MHz to 50 MHz as it allows timing to be closed significantly more quickly by customers who chose to build the reference design themselves. Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index 35030ea330ee..b6bfe177ccb2 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -29,7 +29,7 @@ fabric_clk3: fabric-clk3 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <62500000>; + clock-frequency = <50000000>; }; fabric_clk1: fabric-clk1 { -- cgit v1.2.3 From 978a17d1a688db025275d282665ab3f39407191d Mon Sep 17 00:00:00 2001 From: Vattipalli Praveen Date: Tue, 27 Sep 2022 12:19:21 +0100 Subject: riscv: dts: microchip: add sevkit device tree Add a basic dts for the Microchip Smart Embedded Vision dev kit. The SEV kit is an upcoming first party board, featuring an MPFS250T and: - Dual Sony Camera Sensors (IMX334) - IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi - Bluetooth 5 Low Energy - 4 GB DDR4 x64 - 2 GB LPDDR4 x32 - 1 GB SPI Flash - 8 GB eMMC flash & SD card slot (multiplexed) - HDMI2.0 Video Input/Output - MIPI DSI Output - MIPI CSI-2 Input Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06 Signed-off-by: Vattipalli Praveen Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/Makefile | 1 + .../boot/dts/microchip/mpfs-sev-kit-fabric.dtsi | 45 +++++++ arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts | 145 +++++++++++++++++++++ 3 files changed, 191 insertions(+) create mode 100644 arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index 39aae7b04f1c..f18477b2e86d 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi new file mode 100644 index 000000000000..8545baf4d129 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts new file mode 100644 index 000000000000..013cb666c72d --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2022 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-sev-kit-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define MTIMER_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PolarFire-SoC SEV Kit"; + compatible = "microchip,mpfs-sev-kit", "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + fabricbuf0ddrc: buffer@80000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x80000000 0x0 0x2000000>; + }; + + fabricbuf1ddrnc: buffer@c4000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xc4000000 0x0 0x4000000>; + }; + + fabricbuf2ddrncwcb: buffer@d4000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xd4000000 0x0 0x4000000>; + }; + }; + + ddrc_cache: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x0 0x0 0x76000000>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&mac0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy0>; + phy1: ethernet-phy@9 { + reg = <9>; + }; + phy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +&mac1 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy1>; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + status = "okay"; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; -- cgit v1.2.3 From d49166646e44064b694a2e631fcdba4f814746d9 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:22 +0100 Subject: riscv: dts: microchip: add a devicetree for aries' m100pfsevp Add device trees for both configs used by the Aries Embedded M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM, featuring: - 2GB DDR4 SDRAM dedicated to the HMS - 512MB DDR4 SDRAM dedicated to the FPGA - 32 MB SPI NOR Flash - 4 GByte eMMC and a carrier board with: - 2x Gigabit Ethernet - USB - 2x UART - 2x CAN - TFT connector - HSMC extension connector - 3x PMOD extension connectors - microSD-card slot Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf Co-developed-by: Wolfgang Grandegger Signed-off-by: Wolfgang Grandegger Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/Makefile | 1 + .../boot/dts/microchip/mpfs-m100pfs-fabric.dtsi | 45 ++++++ arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts | 179 +++++++++++++++++++++ 3 files changed, 225 insertions(+) create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index f18477b2e86d..7427a20934f3 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi new file mode 100644 index 000000000000..7b9ee13b6a3a --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts new file mode 100644 index 000000000000..184cb36a175e --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Original all-in-one devicetree: + * Copyright (C) 2021-2022 - Wolfgang Grandegger + * Rewritten to use includes: + * Copyright (C) 2022 - Conor Dooley + */ +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-m100pfs-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define MTIMER_FREQ 1000000 + +/ { + model = "Aries Embedded M100PFEVPS"; + compatible = "aries,m100pfsevp", "microchip,mpfs"; + + aliases { + ethernet0 = &mac0; + ethernet1 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + gpio0 = &gpio0; + gpio1 = &gpio2; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + ddrc_cache_hi: memory@1040000000 { + device_type = "memory"; + reg = <0x10 0x40000000 0x0 0x40000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&gpio0 { + interrupts = <13>, <14>, <15>, <16>, + <17>, <18>, <19>, <20>, + <21>, <22>, <23>, <24>, + <25>, <26>; + ngpios = <14>; + status = "okay"; + + pmic-irq-hog { + gpio-hog; + gpios = <13 0>; + input; + }; + + /* Set to low for eMMC, high for SD-card */ + mmc-sel-hog { + gpio-hog; + gpios = <12 0>; + output-high; + }; +}; + +&gpio2 { + interrupts = <13>, <14>, <15>, <16>, + <17>, <18>, <19>, <20>, + <21>, <22>, <23>, <24>, + <25>, <26>, <27>, <28>, + <29>, <30>, <31>, <32>, + <33>, <34>, <35>, <36>, + <37>, <38>, <39>, <40>, + <41>, <42>, <43>, <44>; + status = "okay"; +}; + +&mac0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mac1 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy1>; + phy1: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + max-frequency = <50000000>; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + no-1-8-v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; -- cgit v1.2.3 From 6c1193301791d3fcc0ad9ff3b861a8216e00773b Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:23 +0100 Subject: riscv: dts: microchip: update memory configuration for v2022.10 In the v2022.10 reference design, the seg registers are going to be changed, resulting in a required change to the memory map in Linux. A small 4M reservation is made at the end of 32-bit DDR to provide some memory for the HSS to use, so that it can cache its payload.bin between reboots of a specific context. Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 42d350fe6c6b..31f88cb4d5e5 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -33,15 +33,26 @@ ddrc_cache_lo: memory@80000000 { device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x2e000000>; + reg = <0x0 0x80000000 0x0 0x40000000>; status = "okay"; }; ddrc_cache_hi: memory@1000000000 { device_type = "memory"; - reg = <0x10 0x0 0x0 0x40000000>; + reg = <0x10 0x40000000 0x0 0x40000000>; status = "okay"; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss_payload: region@BFC00000 { + reg = <0x0 0xBFC00000 0x0 0x400000>; + no-map; + }; + }; }; &core_pwm0 { -- cgit v1.2.3 From 3baca1a4d490484fcd555413f1fec85b2e071912 Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Wed, 27 Jul 2022 10:08:29 +0530 Subject: RISC-V: Add mvendorid, marchid, and mimpid to /proc/cpuinfo output Identifying the underlying RISC-V implementation can be important for some of the user space applications. For example, the perf tool uses arch specific CPU implementation id (i.e. CPUID) to select a JSON file describing custom perf events on a CPU. Currently, there is no way to identify RISC-V implementation so we add mvendorid, marchid, and mimpid to /proc/cpuinfo output. Signed-off-by: Anup Patel Reviewed-by: Heinrich Schuchardt Tested-by: Nikita Shubin Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220727043829.151794-1-apatel@ventanamicro.com/ Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/cpu.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c index 0be8a2403212..250220e2cceb 100644 --- a/arch/riscv/kernel/cpu.c +++ b/arch/riscv/kernel/cpu.c @@ -3,10 +3,13 @@ * Copyright (C) 2012 Regents of the University of California */ +#include #include #include #include +#include #include +#include #include #include @@ -68,6 +71,50 @@ int riscv_of_parent_hartid(struct device_node *node, unsigned long *hartid) } #ifdef CONFIG_PROC_FS + +struct riscv_cpuinfo { + unsigned long mvendorid; + unsigned long marchid; + unsigned long mimpid; +}; +static DEFINE_PER_CPU(struct riscv_cpuinfo, riscv_cpuinfo); + +static int riscv_cpuinfo_starting(unsigned int cpu) +{ + struct riscv_cpuinfo *ci = this_cpu_ptr(&riscv_cpuinfo); + +#if IS_ENABLED(CONFIG_RISCV_SBI) + ci->mvendorid = sbi_spec_is_0_1() ? 0 : sbi_get_mvendorid(); + ci->marchid = sbi_spec_is_0_1() ? 0 : sbi_get_marchid(); + ci->mimpid = sbi_spec_is_0_1() ? 0 : sbi_get_mimpid(); +#elif IS_ENABLED(CONFIG_RISCV_M_MODE) + ci->mvendorid = csr_read(CSR_MVENDORID); + ci->marchid = csr_read(CSR_MARCHID); + ci->mimpid = csr_read(CSR_MIMPID); +#else + ci->mvendorid = 0; + ci->marchid = 0; + ci->mimpid = 0; +#endif + + return 0; +} + +static int __init riscv_cpuinfo_init(void) +{ + int ret; + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "riscv/cpuinfo:starting", + riscv_cpuinfo_starting, NULL); + if (ret < 0) { + pr_err("cpuinfo: failed to register hotplug callbacks.\n"); + return ret; + } + + return 0; +} +device_initcall(riscv_cpuinfo_init); + #define __RISCV_ISA_EXT_DATA(UPROP, EXTID) \ { \ .uprop = #UPROP, \ @@ -185,6 +232,7 @@ static int c_show(struct seq_file *m, void *v) { unsigned long cpu_id = (unsigned long)v - 1; struct device_node *node = of_get_cpu_node(cpu_id, NULL); + struct riscv_cpuinfo *ci = per_cpu_ptr(&riscv_cpuinfo, cpu_id); const char *compat, *isa; seq_printf(m, "processor\t: %lu\n", cpu_id); @@ -195,6 +243,9 @@ static int c_show(struct seq_file *m, void *v) if (!of_property_read_string(node, "compatible", &compat) && strcmp(compat, "riscv")) seq_printf(m, "uarch\t\t: %s\n", compat); + seq_printf(m, "mvendorid\t: 0x%lx\n", ci->mvendorid); + seq_printf(m, "marchid\t\t: 0x%lx\n", ci->marchid); + seq_printf(m, "mimpid\t\t: 0x%lx\n", ci->mimpid); seq_puts(m, "\n"); of_node_put(node); -- cgit v1.2.3 From c210b91818e81068ca2573c20684644b8e110a07 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 20 Sep 2022 10:37:35 +0100 Subject: riscv: dts: microchip: fix fabric i2c reg size The size of the reg should've been changed when the address was changed, but obviously I forgot to do so. Fixes: ab291621a8b8 ("riscv: dts: microchip: icicle: re-jig fabric peripheral addresses") Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index b6bfe177ccb2..24b1cfb9a73e 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -16,7 +16,7 @@ i2c2: i2c@40000200 { compatible = "microchip,corei2c-rtl-v7"; - reg = <0x0 0x40000200 0x0 0x1000>; + reg = <0x0 0x40000200 0x0 0x100>; #address-cells = <1>; #size-cells = <0>; clocks = <&fabric_clk3>; -- cgit v1.2.3 From 71c8517e004b950a148581ea2d2abe10aa46e02d Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 10 Oct 2022 23:17:04 +0100 Subject: MAINTAINERS: update polarfire soc clock binding The clock binding has been renamed and a new binding added for the clock controllers in the FPGA fabric. Generalise the pattern to cover both. Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20221010221704.2161221-2-conor@kernel.org/ Signed-off-by: Palmer Dabbelt --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0dc4a769216b..94cf47ea5f80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17645,7 +17645,7 @@ M: Conor Dooley M: Daire McNamara L: linux-riscv@lists.infradead.org S: Supported -F: Documentation/devicetree/bindings/clock/microchip,mpfs.yaml +F: Documentation/devicetree/bindings/clock/microchip,mpfs*.yaml F: Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml F: Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml F: Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml -- cgit v1.2.3 From abbb388d335f8c400d1baecb15d360fa0062de77 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 10 Oct 2022 23:17:05 +0100 Subject: dt-bindings: riscv: update microchip.yaml's maintainership Daire and I are the platform maintainers for Microchip's RISC-V FPGAs. Update the maintainers in microchip.yaml to reflect this and explicitly add the binding to the SoC's MAINTAINERS entry. Acked-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20221010221704.2161221-3-conor@kernel.org/ Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/riscv/microchip.yaml | 4 ++-- MAINTAINERS | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 1aa7336a9672..9faf8447332b 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip PolarFire SoC-based boards device tree bindings maintainers: - - Cyril Jean - - Lewis Hanly + - Conor Dooley + - Daire McNamara description: Microchip PolarFire SoC-based boards diff --git a/MAINTAINERS b/MAINTAINERS index 94cf47ea5f80..b3415857a812 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17651,6 +17651,7 @@ F: Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml F: Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml F: Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml F: Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml +F: Documentation/devicetree/bindings/riscv/microchip.yaml F: Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml F: Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml F: Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml -- cgit v1.2.3 From 10f6913c548b32ecb73801a16b120e761c6957ea Mon Sep 17 00:00:00 2001 From: Wenting Zhang Date: Fri, 8 Jul 2022 16:38:22 -0400 Subject: riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be used regardless of the result of device tree scanning. This especially fixes the case where a device tree without the chosen node is supplied to the kernel. In such cases, early_init_dt_scan would return true. But inside early_init_dt_scan_chosen, the cmdline won't be updated as there is no chosen node in the device tree. As a result, CONFIG_CMDLINE is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE is enabled. This commit allows properly update boot_command_line in this situation. Fixes: 8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed") Signed-off-by: Wenting Zhang Reviewed-by: Björn Töpel Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB3991.apcprd04.prod.outlook.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index 2dfc463b86bb..ad76bb59b059 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -252,10 +252,10 @@ static void __init parse_dtb(void) pr_info("Machine model: %s\n", name); dump_stack_set_arch_desc("%s (DT)", name); } - return; + } else { + pr_err("No DTB passed to the kernel\n"); } - pr_err("No DTB passed to the kernel\n"); #ifdef CONFIG_CMDLINE_FORCE strscpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); pr_info("Forcing kernel command line to: %s\n", boot_command_line); -- cgit v1.2.3 From 06267eb2decaa6baac81bbd882265a8e7782dba4 Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Thu, 28 Jul 2022 14:07:15 -0700 Subject: doc: RISC-V: Document that misaligned accesses are supported The RISC-V ISA manual used to mandate that misaligned accesses were supported in user mode, but that requirement was removed in 2018 via riscv-isa-manual commit 61cadb9 ("Provide new description of misaligned load/store behavior compatible with privileged architecture."). Since the Linux uABI was already frozen at that point it's just been demoted to part of the uABI, but that was never written down. Link: https://lore.kernel.org/r/20220728210715.17214-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt --- Documentation/riscv/index.rst | 1 + Documentation/riscv/uabi.rst | 6 ++++++ 2 files changed, 7 insertions(+) create mode 100644 Documentation/riscv/uabi.rst diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst index e23b876ad6eb..2e5b18fbb145 100644 --- a/Documentation/riscv/index.rst +++ b/Documentation/riscv/index.rst @@ -8,6 +8,7 @@ RISC-V architecture boot-image-header vm-layout patch-acceptance + uabi features diff --git a/Documentation/riscv/uabi.rst b/Documentation/riscv/uabi.rst new file mode 100644 index 000000000000..21a82cfb6c4d --- /dev/null +++ b/Documentation/riscv/uabi.rst @@ -0,0 +1,6 @@ +.. SPDX-License-Identifier: GPL-2.0 + +RISC-V Linux User ABI +===================== + +Misaligned accesses are supported in userspace, but they may perform poorly. -- cgit v1.2.3 From 826249942679a110353e71a1d92764fcf43e7cf7 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 23 Aug 2022 19:33:17 +0100 Subject: dt-bindings: timer: sifive,clint: add legacy riscv compatible While "real" hardware might not use the compatible string "riscv,clint0" it is present in the driver & QEMU uses it for automatically generated virt machine dtbs. To avoid dt-validate problems with QEMU produced dtbs, such as the following, add it to the binding. riscv-virt.dtb: clint@2000000: compatible:0: 'sifive,clint0' is not one of ['sifive,fu540-c000-clint', 'starfive,jh7100-clint', 'canaan,k210-clint'] Reported-by: Rob Herring Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ Reviewed-by: Rob Herring Signed-off-by: Conor Dooley Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20220823183319.3314940-2-mail@conchuod.ie Signed-off-by: Palmer Dabbelt --- .../devicetree/bindings/timer/sifive,clint.yaml | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index e64f46339079..bbad24165837 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -22,12 +22,18 @@ description: properties: compatible: - items: - - enum: - - sifive,fu540-c000-clint - - starfive,jh7100-clint - - canaan,k210-clint - - const: sifive,clint0 + oneOf: + - items: + - enum: + - sifive,fu540-c000-clint + - starfive,jh7100-clint + - canaan,k210-clint + - const: sifive,clint0 + - items: + - const: sifive,clint0 + - const: riscv,clint0 + deprecated: true + description: For the QEMU virt machine only description: Should be ",-clint" and "sifive,clint". -- cgit v1.2.3 From 6e965c9bd7388762b302dca5852eb25cbe9cc085 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 23 Aug 2022 19:33:18 +0100 Subject: dt-bindings: interrupt-controller: sifive,plic: add legacy riscv compatible While "real" hardware might not use the compatible string "riscv,plic0" it is present in the driver & QEMU uses it for automatically generated virt machine dtbs. To avoid dt-validate problems with QEMU produced dtbs, such as the following, add it to the binding. riscv-virt.dtb: plic@c000000: compatible: 'oneOf' conditional failed, one must be fixed: 'sifive,plic-1.0.0' is not one of ['sifive,fu540-c000-plic', 'starfive,jh7100-plic', 'canaan,k210-plic'] 'sifive,plic-1.0.0' is not one of ['allwinner,sun20i-d1-plic'] 'sifive,plic-1.0.0' was expected 'thead,c900-plic' was expected riscv-virt.dtb: plic@c000000: '#address-cells' is a required property Reported-by: Rob Herring Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ Reviewed-by: Rob Herring Signed-off-by: Conor Dooley Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20220823183319.3314940-3-mail@conchuod.ie Signed-off-by: Palmer Dabbelt --- .../devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 92e0f8c3eff2..99e01f4d0a69 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -66,6 +66,11 @@ properties: - enum: - allwinner,sun20i-d1-plic - const: thead,c900-plic + - items: + - const: sifive,plic-1.0.0 + - const: riscv,plic0 + deprecated: true + description: For the QEMU virt machine only reg: maxItems: 1 -- cgit v1.2.3 From 299824e68bd0fac60f8352c940fd731fde609de1 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 23 Aug 2022 19:33:19 +0100 Subject: dt-bindings: riscv: add new riscv,isa strings for emulators The QEMU virt and spike machines currently export a riscv,isa string of "rv64imafdcsuh", While the RISC-V foundation has been ratifying a bunch of extenstions etc, the kernel has remained relatively static with what hardware is supported - but the same is not true of QEMU. Using the virt machine and running dt-validate on the dumped dtb fails, partly due to the unexpected isa string. Rather than enumerate the many many possbilities, change the pattern to a regex, with the following assumptions: - ima are required - the single letter order is fixed & we don't care about things that can't even do "ima" - the standard multi letter extensions are all in a "_z" format where the first letter of is a valid single letter extension - _s & _h are used for supervisor and hyper visor extensions - convention says that after the first two chars, a standard multi letter extension name could be an english word (ifencei anyone?) so it's not worth restricting the charset - as the above is just convention, don't apply any charset restrictions to reduce future churn - vendor ISA extensions begind with _x and have no charset restrictions - we don't care about an e extension from an OS pov - that attempting to validate the contents of the multiletter extensions with dt-validate beyond the formatting is a futile, massively verbose or unwieldy exercise at best The following limitations also apply: - multi letter extension ordering is not enforced. dt-schema does not appear to allow for named match groups, so the resulting regex would be even more of a headache - ditto for the numbered extensions Finally, add me as a maintainer of the binding so that when it breaks in the future, I can be held responsible! Reported-by: Rob Herring Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ Reviewed-by: Andrew Jones Acked-by: Guo Ren Signed-off-by: Conor Dooley Acked-by: Heiko Stuebner Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220823183319.3314940-4-mail@conchuod.ie Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/riscv/cpus.yaml | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 873dd12f6e89..90a7cabf58fe 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -9,6 +9,7 @@ title: RISC-V bindings for 'cpus' DT nodes maintainers: - Paul Walmsley - Palmer Dabbelt + - Conor Dooley description: | This document uses some terminology common to the RISC-V community @@ -79,9 +80,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. $ref: "/schemas/types.yaml#/definitions/string" - enum: - - rv64imac - - rv64imafdc + pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$ # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false -- cgit v1.2.3 From f2913d006fcdb61719635e093d1b5dd0dafecac7 Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Tue, 20 Sep 2022 13:00:37 -0700 Subject: RISC-V: Avoid dereferening NULL regs in die() I don't think we can actually die() without a regs pointer, but the compiler was warning about a NULL check after a dereference. It seems prudent to just avoid the possibly-NULL dereference, given that when die()ing the system is already toast so who knows how we got there. Reported-by: kernel test robot Reported-by: Dan Carpenter Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220920200037.6727-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/traps.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c index 635e6ec26938..f3e96d60a2ff 100644 --- a/arch/riscv/kernel/traps.c +++ b/arch/riscv/kernel/traps.c @@ -33,6 +33,7 @@ void die(struct pt_regs *regs, const char *str) { static int die_counter; int ret; + long cause; oops_enter(); @@ -42,11 +43,13 @@ void die(struct pt_regs *regs, const char *str) pr_emerg("%s [#%d]\n", str, ++die_counter); print_modules(); - show_regs(regs); + if (regs) + show_regs(regs); - ret = notify_die(DIE_OOPS, str, regs, 0, regs->cause, SIGSEGV); + cause = regs ? regs->cause : -1; + ret = notify_die(DIE_OOPS, str, regs, 0, cause, SIGSEGV); - if (regs && kexec_should_crash(current)) + if (kexec_should_crash(current)) crash_kexec(regs); bust_spinlocks(0); -- cgit v1.2.3 From 3cebf80e9a0d3adcb174053be32c88a640b3344b Mon Sep 17 00:00:00 2001 From: Fangrui Song Date: Sun, 18 Sep 2022 02:29:34 -0700 Subject: riscv: Pass -mno-relax only on lld < 15.0.0 lld since llvm:6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be included in the 15.0.0 release, has implemented some RISC-V linker relaxation. -mno-relax is no longer needed in KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld can not handle: ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN requires unimplemented linker relaxation; recompile with -mno-relax but the .o is already compiled with -mno-relax Signed-off-by: Fangrui Song Link: https://lore.kernel.org/r/20220710071117.446112-1-maskray@google.com/ Link: https://lore.kernel.org/r/20220918092933.19943-1-palmer@rivosinc.com Reviewed-by: Nick Desaulniers Tested-by: Nick Desaulniers Tested-by: Nathan Chancellor Tested-by: Conor Dooley Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index d63295e21373..76364cf67a72 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -37,6 +37,7 @@ else endif ifeq ($(CONFIG_LD_IS_LLD),y) +ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 150000; echo $$?),0) KBUILD_CFLAGS += -mno-relax KBUILD_AFLAGS += -mno-relax ifndef CONFIG_AS_IS_LLVM @@ -44,6 +45,7 @@ ifndef CONFIG_AS_IS_LLVM KBUILD_AFLAGS += -Wa,-mno-relax endif endif +endif # ISA string setting riscv-march-$(CONFIG_ARCH_RV32I) := rv32ima -- cgit v1.2.3 From e47bddcb2ec531022a915f896f13586470b593d0 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 5 Sep 2022 13:10:23 +0200 Subject: riscv: cleanup svpbmt cpufeature probing For better readability (and compile time coverage) use IS_ENABLED instead of ifdef and drop the new unneeded switch statement. Signed-off-by: Heiko Stuebner Reviewed-by: Guo Ren Reviewed-by: Conor Dooley Reviewed-by: Andrew Jones Link: https://lore.kernel.org/r/20220905111027.2463297-2-heiko@sntech.de Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/cpufeature.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c index 553d755483ed..764ea220161f 100644 --- a/arch/riscv/kernel/cpufeature.c +++ b/arch/riscv/kernel/cpufeature.c @@ -253,16 +253,13 @@ void __init riscv_fill_hwcap(void) #ifdef CONFIG_RISCV_ALTERNATIVE static bool __init_or_module cpufeature_probe_svpbmt(unsigned int stage) { -#ifdef CONFIG_RISCV_ISA_SVPBMT - switch (stage) { - case RISCV_ALTERNATIVES_EARLY_BOOT: + if (!IS_ENABLED(CONFIG_RISCV_ISA_SVPBMT)) return false; - default: - return riscv_isa_extension_available(NULL, SVPBMT); - } -#endif - return false; + if (stage == RISCV_ALTERNATIVES_EARLY_BOOT) + return false; + + return riscv_isa_extension_available(NULL, SVPBMT); } static bool __init_or_module cpufeature_probe_zicbom(unsigned int stage) -- cgit v1.2.3 From f055268e3946555deb9bb80b2c8c9798c64dbc47 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 5 Sep 2022 13:10:24 +0200 Subject: riscv: drop some idefs from CMO initialization Wrapping things in #ifdefs makes the code harder to read while we also have IS_ENABLED() macros to do this in regular code and the extension detection is not _that_ runtime critical. So define a stub for riscv_noncoherent_supported() in the non-CONFIG_RISCV_DMA_NONCOHERENT case and move the code to us IS_ENABLED. Suggested-by: Conor Dooley Signed-off-by: Heiko Stuebner Reviewed-by: Guo Ren Reviewed-by: Conor Dooley Reviewed-by: Andrew Jones Link: https://lore.kernel.org/r/20220905111027.2463297-3-heiko@sntech.de Signed-off-by: Palmer Dabbelt --- arch/riscv/errata/thead/errata.c | 7 +++---- arch/riscv/include/asm/cacheflush.h | 2 ++ arch/riscv/kernel/cpufeature.c | 22 +++++++++------------- 3 files changed, 14 insertions(+), 17 deletions(-) diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c index 202c83f677b2..bffa711aaf64 100644 --- a/arch/riscv/errata/thead/errata.c +++ b/arch/riscv/errata/thead/errata.c @@ -30,7 +30,9 @@ static bool errata_probe_pbmt(unsigned int stage, static bool errata_probe_cmo(unsigned int stage, unsigned long arch_id, unsigned long impid) { -#ifdef CONFIG_ERRATA_THEAD_CMO + if (!IS_ENABLED(CONFIG_ERRATA_THEAD_CMO)) + return false; + if (arch_id != 0 || impid != 0) return false; @@ -39,9 +41,6 @@ static bool errata_probe_cmo(unsigned int stage, riscv_noncoherent_supported(); return true; -#else - return false; -#endif } static u32 thead_errata_probe(unsigned int stage, diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h index a60acaecfeda..4363d0beb38a 100644 --- a/arch/riscv/include/asm/cacheflush.h +++ b/arch/riscv/include/asm/cacheflush.h @@ -50,6 +50,8 @@ static inline void riscv_init_cbom_blocksize(void) { } #ifdef CONFIG_RISCV_DMA_NONCOHERENT void riscv_noncoherent_supported(void); +#else +static inline void riscv_noncoherent_supported(void) {} #endif /* diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c index 764ea220161f..729f7a218093 100644 --- a/arch/riscv/kernel/cpufeature.c +++ b/arch/riscv/kernel/cpufeature.c @@ -264,21 +264,17 @@ static bool __init_or_module cpufeature_probe_svpbmt(unsigned int stage) static bool __init_or_module cpufeature_probe_zicbom(unsigned int stage) { -#ifdef CONFIG_RISCV_ISA_ZICBOM - switch (stage) { - case RISCV_ALTERNATIVES_EARLY_BOOT: + if (!IS_ENABLED(CONFIG_RISCV_ISA_ZICBOM)) + return false; + + if (stage == RISCV_ALTERNATIVES_EARLY_BOOT) + return false; + + if (!riscv_isa_extension_available(NULL, ZICBOM)) return false; - default: - if (riscv_isa_extension_available(NULL, ZICBOM)) { - riscv_noncoherent_supported(); - return true; - } else { - return false; - } - } -#endif - return false; + riscv_noncoherent_supported(); + return true; } /* -- cgit v1.2.3 From 499590c084f13b6aca225e5766edeebd48437ee8 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 5 Sep 2022 13:10:25 +0200 Subject: riscv: use BIT() macros in t-head errata init Using the appropriate BIT macro makes the code better readable. Suggested-by: Conor Dooley Signed-off-by: Heiko Stuebner Reviewed-by: Guo Ren Reviewed-by: Conor Dooley Reviewed-by: Andrew Jones Link: https://lore.kernel.org/r/20220905111027.2463297-4-heiko@sntech.de Signed-off-by: Palmer Dabbelt --- arch/riscv/errata/thead/errata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c index bffa711aaf64..a6f4bd8ccf3f 100644 --- a/arch/riscv/errata/thead/errata.c +++ b/arch/riscv/errata/thead/errata.c @@ -49,10 +49,10 @@ static u32 thead_errata_probe(unsigned int stage, u32 cpu_req_errata = 0; if (errata_probe_pbmt(stage, archid, impid)) - cpu_req_errata |= (1U << ERRATA_THEAD_PBMT); + cpu_req_errata |= BIT(ERRATA_THEAD_PBMT); if (errata_probe_cmo(stage, archid, impid)) - cpu_req_errata |= (1U << ERRATA_THEAD_CMO); + cpu_req_errata |= BIT(ERRATA_THEAD_CMO); return cpu_req_errata; } -- cgit v1.2.3 From e283187c034cd80c1dd98ad732c73ce930a5efa4 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 5 Sep 2022 13:10:26 +0200 Subject: riscv: use BIT() marco for cpufeature probing Using the appropriate BIT macro makes the code better readable. Suggested-by: Conor Dooley Signed-off-by: Heiko Stuebner Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220905111027.2463297-5-heiko@sntech.de Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/cpufeature.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c index 729f7a218093..08f7445985dc 100644 --- a/arch/riscv/kernel/cpufeature.c +++ b/arch/riscv/kernel/cpufeature.c @@ -289,10 +289,10 @@ static u32 __init_or_module cpufeature_probe(unsigned int stage) u32 cpu_req_feature = 0; if (cpufeature_probe_svpbmt(stage)) - cpu_req_feature |= (1U << CPUFEATURE_SVPBMT); + cpu_req_feature |= BIT(CPUFEATURE_SVPBMT); if (cpufeature_probe_zicbom(stage)) - cpu_req_feature |= (1U << CPUFEATURE_ZICBOM); + cpu_req_feature |= BIT(CPUFEATURE_ZICBOM); return cpu_req_feature; } -- cgit v1.2.3 From 14057733109dcc83c35a6730f3b7112aac4d2b82 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 5 Sep 2022 13:10:27 +0200 Subject: riscv: check for kernel config option in t-head memory types errata The t-head variant of page-based memory types should also check first for the enabled kernel config option. Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head") Signed-off-by: Heiko Stuebner Reviewed-by: Conor Dooley Reviewed-by: Andrew Jones Reviewed-by: Guo Ren Link: https://lore.kernel.org/r/20220905111027.2463297-6-heiko@sntech.de Signed-off-by: Palmer Dabbelt --- arch/riscv/errata/thead/errata.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c index a6f4bd8ccf3f..902e12452821 100644 --- a/arch/riscv/errata/thead/errata.c +++ b/arch/riscv/errata/thead/errata.c @@ -17,6 +17,9 @@ static bool errata_probe_pbmt(unsigned int stage, unsigned long arch_id, unsigned long impid) { + if (!IS_ENABLED(CONFIG_ERRATA_THEAD_PBMT)) + return false; + if (arch_id != 0 || impid != 0) return false; -- cgit v1.2.3 From 44dce4b084f83f41922ed8c2a2c7d148254848bb Mon Sep 17 00:00:00 2001 From: Zong Li Date: Tue, 13 Sep 2022 06:18:11 +0000 Subject: dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache Since composable cache may be L3 cache if private L2 cache exists, we should use its original name Composable cache to prevent confusion. Signed-off-by: Zong Li Suggested-by: Conor Dooley Suggested-by: Ben Dooks Reviewed-by: Conor Dooley Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220913061817.22564-2-zong.li@sifive.com Signed-off-by: Palmer Dabbelt --- .../devicetree/bindings/riscv/sifive,ccache0.yaml | 164 +++++++++++++++++++++ .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 146 ------------------ 2 files changed, 164 insertions(+), 146 deletions(-) create mode 100644 Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml delete mode 100644 Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml diff --git a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml new file mode 100644 index 000000000000..bf3f07421f7e --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/sifive,ccache0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive Composable Cache Controller + +maintainers: + - Sagar Kadam + - Paul Walmsley + +description: + The SiFive Composable Cache Controller is used to provide access to fast copies + of memory for masters in a Core Complex. The Composable Cache Controller also + acts as directory-based coherency manager. + All the properties in ePAPR/DeviceTree specification applies for this platform. + +select: + properties: + compatible: + contains: + enum: + - sifive,ccache0 + - sifive,fu540-c000-ccache + - sifive,fu740-c000-ccache + + required: + - compatible + +properties: + compatible: + oneOf: + - items: + - enum: + - sifive,ccache0 + - sifive,fu540-c000-ccache + - sifive,fu740-c000-ccache + - const: cache + - items: + - const: microchip,mpfs-ccache + - const: sifive,fu540-c000-ccache + - const: cache + + cache-block-size: + const: 64 + + cache-level: + enum: [2, 3] + + cache-sets: + enum: [1024, 2048] + + cache-size: + const: 2097152 + + cache-unified: true + + interrupts: + minItems: 3 + items: + - description: DirError interrupt + - description: DataError interrupt + - description: DataFail interrupt + - description: DirFail interrupt + + reg: + maxItems: 1 + + next-level-cache: true + + memory-region: + maxItems: 1 + description: | + The reference to the reserved-memory for the L2 Loosely Integrated Memory region. + The reserved memory node should be defined as per the bindings in reserved-memory.txt. + +allOf: + - $ref: /schemas/cache-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - sifive,fu740-c000-ccache + - microchip,mpfs-ccache + + then: + properties: + interrupts: + description: | + Must contain entries for DirError, DataError, DataFail, DirFail signals. + minItems: 4 + + else: + properties: + interrupts: + description: | + Must contain entries for DirError, DataError and DataFail signals. + maxItems: 3 + + - if: + properties: + compatible: + contains: + const: sifive,fu740-c000-ccache + + then: + properties: + cache-sets: + const: 2048 + + else: + properties: + cache-sets: + const: 1024 + + - if: + properties: + compatible: + contains: + const: sifive,ccache0 + + then: + properties: + cache-level: + enum: [2, 3] + + else: + properties: + cache-level: + const: 2 + +additionalProperties: false + +required: + - compatible + - cache-block-size + - cache-level + - cache-sets + - cache-size + - cache-unified + - interrupts + - reg + +examples: + - | + cache-controller@2010000 { + compatible = "sifive,fu540-c000-ccache", "cache"; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + reg = <0x2010000 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <1>, + <2>, + <3>; + next-level-cache = <&L25>; + memory-region = <&l2_lim>; + }; diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml deleted file mode 100644 index ca3b9be58058..000000000000 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ /dev/null @@ -1,146 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -# Copyright (C) 2020 SiFive, Inc. -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/riscv/sifive-l2-cache.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: SiFive L2 Cache Controller - -maintainers: - - Sagar Kadam - - Paul Walmsley - -description: - The SiFive Level 2 Cache Controller is used to provide access to fast copies - of memory for masters in a Core Complex. The Level 2 Cache Controller also - acts as directory-based coherency manager. - All the properties in ePAPR/DeviceTree specification applies for this platform. - -select: - properties: - compatible: - contains: - enum: - - sifive,fu540-c000-ccache - - sifive,fu740-c000-ccache - - required: - - compatible - -properties: - compatible: - oneOf: - - items: - - enum: - - sifive,fu540-c000-ccache - - sifive,fu740-c000-ccache - - const: cache - - items: - - const: microchip,mpfs-ccache - - const: sifive,fu540-c000-ccache - - const: cache - - cache-block-size: - const: 64 - - cache-level: - const: 2 - - cache-sets: - enum: [1024, 2048] - - cache-size: - const: 2097152 - - cache-unified: true - - interrupts: - minItems: 3 - items: - - description: DirError interrupt - - description: DataError interrupt - - description: DataFail interrupt - - description: DirFail interrupt - - reg: - maxItems: 1 - - next-level-cache: true - - memory-region: - maxItems: 1 - description: | - The reference to the reserved-memory for the L2 Loosely Integrated Memory region. - The reserved memory node should be defined as per the bindings in reserved-memory.txt. - -allOf: - - $ref: /schemas/cache-controller.yaml# - - - if: - properties: - compatible: - contains: - enum: - - sifive,fu740-c000-ccache - - microchip,mpfs-ccache - - then: - properties: - interrupts: - description: | - Must contain entries for DirError, DataError, DataFail, DirFail signals. - minItems: 4 - - else: - properties: - interrupts: - description: | - Must contain entries for DirError, DataError and DataFail signals. - maxItems: 3 - - - if: - properties: - compatible: - contains: - const: sifive,fu740-c000-ccache - - then: - properties: - cache-sets: - const: 2048 - - else: - properties: - cache-sets: - const: 1024 - -additionalProperties: false - -required: - - compatible - - cache-block-size - - cache-level - - cache-sets - - cache-size - - cache-unified - - interrupts - - reg - -examples: - - | - cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; - cache-block-size = <64>; - cache-level = <2>; - cache-sets = <1024>; - cache-size = <2097152>; - cache-unified; - reg = <0x2010000 0x1000>; - interrupt-parent = <&plic0>; - interrupts = <1>, - <2>, - <3>; - next-level-cache = <&L25>; - memory-region = <&l2_lim>; - }; -- cgit v1.2.3 From ca120a79cf5a3323172c82e77efd70ae10d120ef Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Tue, 13 Sep 2022 06:18:12 +0000 Subject: soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. Since composable cache may be L3 cache if there is a L2 cache, we should use its original name composable cache to prevent confusion. There are some new lines were generated due to adding the compatible "sifive,ccache0" into ID table and indent requirement. The sifive L2 has been renamed to sifive CCACHE, EDAC driver needs to apply the change as well. Signed-off-by: Greentime Hu Signed-off-by: Zong Li Co-developed-by: Zong Li Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220913061817.22564-3-zong.li@sifive.com Signed-off-by: Palmer Dabbelt --- drivers/edac/Kconfig | 2 +- drivers/edac/sifive_edac.c | 12 +- drivers/soc/sifive/Kconfig | 6 +- drivers/soc/sifive/Makefile | 2 +- drivers/soc/sifive/sifive_ccache.c | 245 +++++++++++++++++++++++++++++++++++ drivers/soc/sifive/sifive_l2_cache.c | 237 --------------------------------- include/soc/sifive/sifive_ccache.h | 16 +++ include/soc/sifive/sifive_l2_cache.h | 16 --- 8 files changed, 272 insertions(+), 264 deletions(-) create mode 100644 drivers/soc/sifive/sifive_ccache.c delete mode 100644 drivers/soc/sifive/sifive_l2_cache.c create mode 100644 include/soc/sifive/sifive_ccache.h delete mode 100644 include/soc/sifive/sifive_l2_cache.h diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 17562cf1fe97..456602d373b7 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -473,7 +473,7 @@ config EDAC_ALTERA_SDMMC config EDAC_SIFIVE bool "Sifive platform EDAC driver" - depends on EDAC=y && SIFIVE_L2 + depends on EDAC=y && SIFIVE_CCACHE help Support for error detection and correction on the SiFive SoCs. diff --git a/drivers/edac/sifive_edac.c b/drivers/edac/sifive_edac.c index ee800aec7d47..b844e2626fd5 100644 --- a/drivers/edac/sifive_edac.c +++ b/drivers/edac/sifive_edac.c @@ -2,7 +2,7 @@ /* * SiFive Platform EDAC Driver * - * Copyright (C) 2018-2019 SiFive, Inc. + * Copyright (C) 2018-2022 SiFive, Inc. * * This driver is partially based on octeon_edac-pc.c * @@ -10,7 +10,7 @@ #include #include #include "edac_module.h" -#include +#include #define DRVNAME "sifive_edac" @@ -32,9 +32,9 @@ int ecc_err_event(struct notifier_block *this, unsigned long event, void *ptr) p = container_of(this, struct sifive_edac_priv, notifier); - if (event == SIFIVE_L2_ERR_TYPE_UE) + if (event == SIFIVE_CCACHE_ERR_TYPE_UE) edac_device_handle_ue(p->dci, 0, 0, msg); - else if (event == SIFIVE_L2_ERR_TYPE_CE) + else if (event == SIFIVE_CCACHE_ERR_TYPE_CE) edac_device_handle_ce(p->dci, 0, 0, msg); return NOTIFY_OK; @@ -67,7 +67,7 @@ static int ecc_register(struct platform_device *pdev) goto err; } - register_sifive_l2_error_notifier(&p->notifier); + register_sifive_ccache_error_notifier(&p->notifier); return 0; @@ -81,7 +81,7 @@ static int ecc_unregister(struct platform_device *pdev) { struct sifive_edac_priv *p = platform_get_drvdata(pdev); - unregister_sifive_l2_error_notifier(&p->notifier); + unregister_sifive_ccache_error_notifier(&p->notifier); edac_device_del_device(&pdev->dev); edac_device_free_ctl_info(p->dci); diff --git a/drivers/soc/sifive/Kconfig b/drivers/soc/sifive/Kconfig index 58cf8c40d08d..ed4c571f8771 100644 --- a/drivers/soc/sifive/Kconfig +++ b/drivers/soc/sifive/Kconfig @@ -2,9 +2,9 @@ if SOC_SIFIVE -config SIFIVE_L2 - bool "Sifive L2 Cache controller" +config SIFIVE_CCACHE + bool "Sifive Composable Cache controller" help - Support for the L2 cache controller on SiFive platforms. + Support for the composable cache controller on SiFive platforms. endif diff --git a/drivers/soc/sifive/Makefile b/drivers/soc/sifive/Makefile index b5caff77938f..1f5dc339bf82 100644 --- a/drivers/soc/sifive/Makefile +++ b/drivers/soc/sifive/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_SIFIVE_L2) += sifive_l2_cache.o +obj-$(CONFIG_SIFIVE_CCACHE) += sifive_ccache.o diff --git a/drivers/soc/sifive/sifive_ccache.c b/drivers/soc/sifive/sifive_ccache.c new file mode 100644 index 000000000000..949b824e89ad --- /dev/null +++ b/drivers/soc/sifive/sifive_ccache.c @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SiFive composable cache controller Driver + * + * Copyright (C) 2018-2022 SiFive, Inc. + * + */ +#include +#include +#include +#include +#include +#include +#include + +#define SIFIVE_CCACHE_DIRECCFIX_LOW 0x100 +#define SIFIVE_CCACHE_DIRECCFIX_HIGH 0x104 +#define SIFIVE_CCACHE_DIRECCFIX_COUNT 0x108 + +#define SIFIVE_CCACHE_DIRECCFAIL_LOW 0x120 +#define SIFIVE_CCACHE_DIRECCFAIL_HIGH 0x124 +#define SIFIVE_CCACHE_DIRECCFAIL_COUNT 0x128 + +#define SIFIVE_CCACHE_DATECCFIX_LOW 0x140 +#define SIFIVE_CCACHE_DATECCFIX_HIGH 0x144 +#define SIFIVE_CCACHE_DATECCFIX_COUNT 0x148 + +#define SIFIVE_CCACHE_DATECCFAIL_LOW 0x160 +#define SIFIVE_CCACHE_DATECCFAIL_HIGH 0x164 +#define SIFIVE_CCACHE_DATECCFAIL_COUNT 0x168 + +#define SIFIVE_CCACHE_CONFIG 0x00 +#define SIFIVE_CCACHE_WAYENABLE 0x08 +#define SIFIVE_CCACHE_ECCINJECTERR 0x40 + +#define SIFIVE_CCACHE_MAX_ECCINTR 4 + +static void __iomem *ccache_base; +static int g_irq[SIFIVE_CCACHE_MAX_ECCINTR]; +static struct riscv_cacheinfo_ops ccache_cache_ops; + +enum { + DIR_CORR = 0, + DATA_CORR, + DATA_UNCORR, + DIR_UNCORR, +}; + +#ifdef CONFIG_DEBUG_FS +static struct dentry *sifive_test; + +static ssize_t ccache_write(struct file *file, const char __user *data, + size_t count, loff_t *ppos) +{ + unsigned int val; + + if (kstrtouint_from_user(data, count, 0, &val)) + return -EINVAL; + if ((val < 0xFF) || (val >= 0x10000 && val < 0x100FF)) + writel(val, ccache_base + SIFIVE_CCACHE_ECCINJECTERR); + else + return -EINVAL; + return count; +} + +static const struct file_operations ccache_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .write = ccache_write +}; + +static void setup_sifive_debug(void) +{ + sifive_test = debugfs_create_dir("sifive_ccache_cache", NULL); + + debugfs_create_file("sifive_debug_inject_error", 0200, + sifive_test, NULL, &ccache_fops); +} +#endif + +static void ccache_config_read(void) +{ + u32 regval, val; + + regval = readl(ccache_base + SIFIVE_CCACHE_CONFIG); + val = regval & 0xFF; + pr_info("CCACHE: No. of Banks in the cache: %d\n", val); + val = (regval & 0xFF00) >> 8; + pr_info("CCACHE: No. of ways per bank: %d\n", val); + val = (regval & 0xFF0000) >> 16; + pr_info("CCACHE: Sets per bank: %llu\n", (uint64_t)1 << val); + val = (regval & 0xFF000000) >> 24; + pr_info("CCACHE: Bytes per cache block: %llu\n", (uint64_t)1 << val); + + regval = readl(ccache_base + SIFIVE_CCACHE_WAYENABLE); + pr_info("CCACHE: Index of the largest way enabled: %d\n", regval); +} + +static const struct of_device_id sifive_ccache_ids[] = { + { .compatible = "sifive,fu540-c000-ccache" }, + { .compatible = "sifive,fu740-c000-ccache" }, + { .compatible = "sifive,ccache0" }, + { /* end of table */ } +}; + +static ATOMIC_NOTIFIER_HEAD(ccache_err_chain); + +int register_sifive_ccache_error_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&ccache_err_chain, nb); +} +EXPORT_SYMBOL_GPL(register_sifive_ccache_error_notifier); + +int unregister_sifive_ccache_error_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&ccache_err_chain, nb); +} +EXPORT_SYMBOL_GPL(unregister_sifive_ccache_error_notifier); + +static int ccache_largest_wayenabled(void) +{ + return readl(ccache_base + SIFIVE_CCACHE_WAYENABLE) & 0xFF; +} + +static ssize_t number_of_ways_enabled_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%u\n", ccache_largest_wayenabled()); +} + +static DEVICE_ATTR_RO(number_of_ways_enabled); + +static struct attribute *priv_attrs[] = { + &dev_attr_number_of_ways_enabled.attr, + NULL, +}; + +static const struct attribute_group priv_attr_group = { + .attrs = priv_attrs, +}; + +static const struct attribute_group *ccache_get_priv_group(struct cacheinfo + *this_leaf) +{ + /* We want to use private group for composable cache only */ + if (this_leaf->level == 2) + return &priv_attr_group; + else + return NULL; +} + +static irqreturn_t ccache_int_handler(int irq, void *device) +{ + unsigned int add_h, add_l; + + if (irq == g_irq[DIR_CORR]) { + add_h = readl(ccache_base + SIFIVE_CCACHE_DIRECCFIX_HIGH); + add_l = readl(ccache_base + SIFIVE_CCACHE_DIRECCFIX_LOW); + pr_err("CCACHE: DirError @ 0x%08X.%08X\n", add_h, add_l); + /* Reading this register clears the DirError interrupt sig */ + readl(ccache_base + SIFIVE_CCACHE_DIRECCFIX_COUNT); + atomic_notifier_call_chain(&ccache_err_chain, + SIFIVE_CCACHE_ERR_TYPE_CE, + "DirECCFix"); + } + if (irq == g_irq[DIR_UNCORR]) { + add_h = readl(ccache_base + SIFIVE_CCACHE_DIRECCFAIL_HIGH); + add_l = readl(ccache_base + SIFIVE_CCACHE_DIRECCFAIL_LOW); + /* Reading this register clears the DirFail interrupt sig */ + readl(ccache_base + SIFIVE_CCACHE_DIRECCFAIL_COUNT); + atomic_notifier_call_chain(&ccache_err_chain, + SIFIVE_CCACHE_ERR_TYPE_UE, + "DirECCFail"); + panic("CCACHE: DirFail @ 0x%08X.%08X\n", add_h, add_l); + } + if (irq == g_irq[DATA_CORR]) { + add_h = readl(ccache_base + SIFIVE_CCACHE_DATECCFIX_HIGH); + add_l = readl(ccache_base + SIFIVE_CCACHE_DATECCFIX_LOW); + pr_err("CCACHE: DataError @ 0x%08X.%08X\n", add_h, add_l); + /* Reading this register clears the DataError interrupt sig */ + readl(ccache_base + SIFIVE_CCACHE_DATECCFIX_COUNT); + atomic_notifier_call_chain(&ccache_err_chain, + SIFIVE_CCACHE_ERR_TYPE_CE, + "DatECCFix"); + } + if (irq == g_irq[DATA_UNCORR]) { + add_h = readl(ccache_base + SIFIVE_CCACHE_DATECCFAIL_HIGH); + add_l = readl(ccache_base + SIFIVE_CCACHE_DATECCFAIL_LOW); + pr_err("CCACHE: DataFail @ 0x%08X.%08X\n", add_h, add_l); + /* Reading this register clears the DataFail interrupt sig */ + readl(ccache_base + SIFIVE_CCACHE_DATECCFAIL_COUNT); + atomic_notifier_call_chain(&ccache_err_chain, + SIFIVE_CCACHE_ERR_TYPE_UE, + "DatECCFail"); + } + + return IRQ_HANDLED; +} + +static int __init sifive_ccache_init(void) +{ + struct device_node *np; + struct resource res; + int i, rc, intr_num; + + np = of_find_matching_node(NULL, sifive_ccache_ids); + if (!np) + return -ENODEV; + + if (of_address_to_resource(np, 0, &res)) + return -ENODEV; + + ccache_base = ioremap(res.start, resource_size(&res)); + if (!ccache_base) + return -ENOMEM; + + intr_num = of_property_count_u32_elems(np, "interrupts"); + if (!intr_num) { + pr_err("CCACHE: no interrupts property\n"); + return -ENODEV; + } + + for (i = 0; i < intr_num; i++) { + g_irq[i] = irq_of_parse_and_map(np, i); + rc = request_irq(g_irq[i], ccache_int_handler, 0, "ccache_ecc", + NULL); + if (rc) { + pr_err("CCACHE: Could not request IRQ %d\n", g_irq[i]); + return rc; + } + } + + ccache_config_read(); + + ccache_cache_ops.get_priv_group = ccache_get_priv_group; + riscv_set_cacheinfo_ops(&ccache_cache_ops); + +#ifdef CONFIG_DEBUG_FS + setup_sifive_debug(); +#endif + return 0; +} + +device_initcall(sifive_ccache_init); diff --git a/drivers/soc/sifive/sifive_l2_cache.c b/drivers/soc/sifive/sifive_l2_cache.c deleted file mode 100644 index 59640a1d0b28..000000000000 --- a/drivers/soc/sifive/sifive_l2_cache.c +++ /dev/null @@ -1,237 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SiFive L2 cache controller Driver - * - * Copyright (C) 2018-2019 SiFive, Inc. - * - */ -#include -#include -#include -#include -#include -#include -#include - -#define SIFIVE_L2_DIRECCFIX_LOW 0x100 -#define SIFIVE_L2_DIRECCFIX_HIGH 0x104 -#define SIFIVE_L2_DIRECCFIX_COUNT 0x108 - -#define SIFIVE_L2_DIRECCFAIL_LOW 0x120 -#define SIFIVE_L2_DIRECCFAIL_HIGH 0x124 -#define SIFIVE_L2_DIRECCFAIL_COUNT 0x128 - -#define SIFIVE_L2_DATECCFIX_LOW 0x140 -#define SIFIVE_L2_DATECCFIX_HIGH 0x144 -#define SIFIVE_L2_DATECCFIX_COUNT 0x148 - -#define SIFIVE_L2_DATECCFAIL_LOW 0x160 -#define SIFIVE_L2_DATECCFAIL_HIGH 0x164 -#define SIFIVE_L2_DATECCFAIL_COUNT 0x168 - -#define SIFIVE_L2_CONFIG 0x00 -#define SIFIVE_L2_WAYENABLE 0x08 -#define SIFIVE_L2_ECCINJECTERR 0x40 - -#define SIFIVE_L2_MAX_ECCINTR 4 - -static void __iomem *l2_base; -static int g_irq[SIFIVE_L2_MAX_ECCINTR]; -static struct riscv_cacheinfo_ops l2_cache_ops; - -enum { - DIR_CORR = 0, - DATA_CORR, - DATA_UNCORR, - DIR_UNCORR, -}; - -#ifdef CONFIG_DEBUG_FS -static struct dentry *sifive_test; - -static ssize_t l2_write(struct file *file, const char __user *data, - size_t count, loff_t *ppos) -{ - unsigned int val; - - if (kstrtouint_from_user(data, count, 0, &val)) - return -EINVAL; - if ((val < 0xFF) || (val >= 0x10000 && val < 0x100FF)) - writel(val, l2_base + SIFIVE_L2_ECCINJECTERR); - else - return -EINVAL; - return count; -} - -static const struct file_operations l2_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .write = l2_write -}; - -static void setup_sifive_debug(void) -{ - sifive_test = debugfs_create_dir("sifive_l2_cache", NULL); - - debugfs_create_file("sifive_debug_inject_error", 0200, - sifive_test, NULL, &l2_fops); -} -#endif - -static void l2_config_read(void) -{ - u32 regval, val; - - regval = readl(l2_base + SIFIVE_L2_CONFIG); - val = regval & 0xFF; - pr_info("L2CACHE: No. of Banks in the cache: %d\n", val); - val = (regval & 0xFF00) >> 8; - pr_info("L2CACHE: No. of ways per bank: %d\n", val); - val = (regval & 0xFF0000) >> 16; - pr_info("L2CACHE: Sets per bank: %llu\n", (uint64_t)1 << val); - val = (regval & 0xFF000000) >> 24; - pr_info("L2CACHE: Bytes per cache block: %llu\n", (uint64_t)1 << val); - - regval = readl(l2_base + SIFIVE_L2_WAYENABLE); - pr_info("L2CACHE: Index of the largest way enabled: %d\n", regval); -} - -static const struct of_device_id sifive_l2_ids[] = { - { .compatible = "sifive,fu540-c000-ccache" }, - { .compatible = "sifive,fu740-c000-ccache" }, - { /* end of table */ }, -}; - -static ATOMIC_NOTIFIER_HEAD(l2_err_chain); - -int register_sifive_l2_error_notifier(struct notifier_block *nb) -{ - return atomic_notifier_chain_register(&l2_err_chain, nb); -} -EXPORT_SYMBOL_GPL(register_sifive_l2_error_notifier); - -int unregister_sifive_l2_error_notifier(struct notifier_block *nb) -{ - return atomic_notifier_chain_unregister(&l2_err_chain, nb); -} -EXPORT_SYMBOL_GPL(unregister_sifive_l2_error_notifier); - -static int l2_largest_wayenabled(void) -{ - return readl(l2_base + SIFIVE_L2_WAYENABLE) & 0xFF; -} - -static ssize_t number_of_ways_enabled_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%u\n", l2_largest_wayenabled()); -} - -static DEVICE_ATTR_RO(number_of_ways_enabled); - -static struct attribute *priv_attrs[] = { - &dev_attr_number_of_ways_enabled.attr, - NULL, -}; - -static const struct attribute_group priv_attr_group = { - .attrs = priv_attrs, -}; - -static const struct attribute_group *l2_get_priv_group(struct cacheinfo *this_leaf) -{ - /* We want to use private group for L2 cache only */ - if (this_leaf->level == 2) - return &priv_attr_group; - else - return NULL; -} - -static irqreturn_t l2_int_handler(int irq, void *device) -{ - unsigned int add_h, add_l; - - if (irq == g_irq[DIR_CORR]) { - add_h = readl(l2_base + SIFIVE_L2_DIRECCFIX_HIGH); - add_l = readl(l2_base + SIFIVE_L2_DIRECCFIX_LOW); - pr_err("L2CACHE: DirError @ 0x%08X.%08X\n", add_h, add_l); - /* Reading this register clears the DirError interrupt sig */ - readl(l2_base + SIFIVE_L2_DIRECCFIX_COUNT); - atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE, - "DirECCFix"); - } - if (irq == g_irq[DIR_UNCORR]) { - add_h = readl(l2_base + SIFIVE_L2_DIRECCFAIL_HIGH); - add_l = readl(l2_base + SIFIVE_L2_DIRECCFAIL_LOW); - /* Reading this register clears the DirFail interrupt sig */ - readl(l2_base + SIFIVE_L2_DIRECCFAIL_COUNT); - atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_UE, - "DirECCFail"); - panic("L2CACHE: DirFail @ 0x%08X.%08X\n", add_h, add_l); - } - if (irq == g_irq[DATA_CORR]) { - add_h = readl(l2_base + SIFIVE_L2_DATECCFIX_HIGH); - add_l = readl(l2_base + SIFIVE_L2_DATECCFIX_LOW); - pr_err("L2CACHE: DataError @ 0x%08X.%08X\n", add_h, add_l); - /* Reading this register clears the DataError interrupt sig */ - readl(l2_base + SIFIVE_L2_DATECCFIX_COUNT); - atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE, - "DatECCFix"); - } - if (irq == g_irq[DATA_UNCORR]) { - add_h = readl(l2_base + SIFIVE_L2_DATECCFAIL_HIGH); - add_l = readl(l2_base + SIFIVE_L2_DATECCFAIL_LOW); - pr_err("L2CACHE: DataFail @ 0x%08X.%08X\n", add_h, add_l); - /* Reading this register clears the DataFail interrupt sig */ - readl(l2_base + SIFIVE_L2_DATECCFAIL_COUNT); - atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_UE, - "DatECCFail"); - } - - return IRQ_HANDLED; -} - -static int __init sifive_l2_init(void) -{ - struct device_node *np; - struct resource res; - int i, rc, intr_num; - - np = of_find_matching_node(NULL, sifive_l2_ids); - if (!np) - return -ENODEV; - - if (of_address_to_resource(np, 0, &res)) - return -ENODEV; - - l2_base = ioremap(res.start, resource_size(&res)); - if (!l2_base) - return -ENOMEM; - - intr_num = of_property_count_u32_elems(np, "interrupts"); - if (!intr_num) { - pr_err("L2CACHE: no interrupts property\n"); - return -ENODEV; - } - - for (i = 0; i < intr_num; i++) { - g_irq[i] = irq_of_parse_and_map(np, i); - rc = request_irq(g_irq[i], l2_int_handler, 0, "l2_ecc", NULL); - if (rc) { - pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[i]); - return rc; - } - } - - l2_config_read(); - - l2_cache_ops.get_priv_group = l2_get_priv_group; - riscv_set_cacheinfo_ops(&l2_cache_ops); - -#ifdef CONFIG_DEBUG_FS - setup_sifive_debug(); -#endif - return 0; -} -device_initcall(sifive_l2_init); diff --git a/include/soc/sifive/sifive_ccache.h b/include/soc/sifive/sifive_ccache.h new file mode 100644 index 000000000000..4d4ed49388a0 --- /dev/null +++ b/include/soc/sifive/sifive_ccache.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * SiFive Composable Cache Controller header file + * + */ + +#ifndef __SOC_SIFIVE_CCACHE_H +#define __SOC_SIFIVE_CCACHE_H + +extern int register_sifive_ccache_error_notifier(struct notifier_block *nb); +extern int unregister_sifive_ccache_error_notifier(struct notifier_block *nb); + +#define SIFIVE_CCACHE_ERR_TYPE_CE 0 +#define SIFIVE_CCACHE_ERR_TYPE_UE 1 + +#endif /* __SOC_SIFIVE_CCACHE_H */ diff --git a/include/soc/sifive/sifive_l2_cache.h b/include/soc/sifive/sifive_l2_cache.h deleted file mode 100644 index 92ade10ed67e..000000000000 --- a/include/soc/sifive/sifive_l2_cache.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * SiFive L2 Cache Controller header file - * - */ - -#ifndef __SOC_SIFIVE_L2_CACHE_H -#define __SOC_SIFIVE_L2_CACHE_H - -extern int register_sifive_l2_error_notifier(struct notifier_block *nb); -extern int unregister_sifive_l2_error_notifier(struct notifier_block *nb); - -#define SIFIVE_L2_ERR_TYPE_CE 0 -#define SIFIVE_L2_ERR_TYPE_UE 1 - -#endif /* __SOC_SIFIVE_L2_CACHE_H */ -- cgit v1.2.3 From 95f196f3212bbc258611c22865aef12b98304e1d Mon Sep 17 00:00:00 2001 From: Zong Li Date: Tue, 13 Sep 2022 06:18:13 +0000 Subject: soc: sifive: ccache: determine the cache level from dts Composable cache could be L2 or L3 cache, use 'cache-level' property of device node to determine the level. Signed-off-by: Zong Li Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220913061817.22564-4-zong.li@sifive.com Signed-off-by: Palmer Dabbelt --- drivers/soc/sifive/sifive_ccache.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/soc/sifive/sifive_ccache.c b/drivers/soc/sifive/sifive_ccache.c index 949b824e89ad..b361b661ea09 100644 --- a/drivers/soc/sifive/sifive_ccache.c +++ b/drivers/soc/sifive/sifive_ccache.c @@ -38,6 +38,7 @@ static void __iomem *ccache_base; static int g_irq[SIFIVE_CCACHE_MAX_ECCINTR]; static struct riscv_cacheinfo_ops ccache_cache_ops; +static int level; enum { DIR_CORR = 0, @@ -144,7 +145,7 @@ static const struct attribute_group *ccache_get_priv_group(struct cacheinfo *this_leaf) { /* We want to use private group for composable cache only */ - if (this_leaf->level == 2) + if (this_leaf->level == level) return &priv_attr_group; else return NULL; @@ -215,6 +216,9 @@ static int __init sifive_ccache_init(void) if (!ccache_base) return -ENOMEM; + if (of_property_read_u32(np, "cache-level", &level)) + return -ENOENT; + intr_num = of_property_count_u32_elems(np, "interrupts"); if (!intr_num) { pr_err("CCACHE: no interrupts property\n"); -- cgit v1.2.3 From 3fb787e5bad50687a65ded7f3bb805cab70dff59 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 13 Sep 2022 06:18:14 +0000 Subject: soc: sifive: ccache: reduce printing on init The driver prints out 6 lines on startup, which can easily be redcued to two lines without losing any information. Note, to make the types work better, uint64_t has been replaced with ULL to make the unsigned long long match the format in the print statement. Signed-off-by: Ben Dooks Signed-off-by: Zong Li Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220913061817.22564-5-zong.li@sifive.com Signed-off-by: Palmer Dabbelt --- drivers/soc/sifive/sifive_ccache.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/drivers/soc/sifive/sifive_ccache.c b/drivers/soc/sifive/sifive_ccache.c index b361b661ea09..17080af7dfa0 100644 --- a/drivers/soc/sifive/sifive_ccache.c +++ b/drivers/soc/sifive/sifive_ccache.c @@ -81,20 +81,17 @@ static void setup_sifive_debug(void) static void ccache_config_read(void) { - u32 regval, val; - - regval = readl(ccache_base + SIFIVE_CCACHE_CONFIG); - val = regval & 0xFF; - pr_info("CCACHE: No. of Banks in the cache: %d\n", val); - val = (regval & 0xFF00) >> 8; - pr_info("CCACHE: No. of ways per bank: %d\n", val); - val = (regval & 0xFF0000) >> 16; - pr_info("CCACHE: Sets per bank: %llu\n", (uint64_t)1 << val); - val = (regval & 0xFF000000) >> 24; - pr_info("CCACHE: Bytes per cache block: %llu\n", (uint64_t)1 << val); - - regval = readl(ccache_base + SIFIVE_CCACHE_WAYENABLE); - pr_info("CCACHE: Index of the largest way enabled: %d\n", regval); + u32 cfg; + + cfg = readl(ccache_base + SIFIVE_CCACHE_CONFIG); + + pr_info("CCACHE: %u banks, %u ways, sets/bank=%llu, bytes/block=%llu\n", + (cfg & 0xff), (cfg >> 8) & 0xff, + BIT_ULL((cfg >> 16) & 0xff), + BIT_ULL((cfg >> 24) & 0xff)); + + cfg = readl(ccache_base + SIFIVE_CCACHE_WAYENABLE); + pr_info("CCACHE: Index of the largest way enabled: %u\n", cfg); } static const struct of_device_id sifive_ccache_ids[] = { -- cgit v1.2.3 From 696ab9bda22a770d079dc3a23bac9aaa553d98f4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 13 Sep 2022 06:18:15 +0000 Subject: soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes Use the pr_fmt() macro to prefix all the output with "CCACHE:" to avoid having to write it out each time, or make a large diff when the next change comes along. Signed-off-by: Ben Dooks Signed-off-by: Zong Li Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220913061817.22564-6-zong.li@sifive.com Signed-off-by: Palmer Dabbelt --- drivers/soc/sifive/sifive_ccache.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/soc/sifive/sifive_ccache.c b/drivers/soc/sifive/sifive_ccache.c index 17080af7dfa0..91f0c2b32ea2 100644 --- a/drivers/soc/sifive/sifive_ccache.c +++ b/drivers/soc/sifive/sifive_ccache.c @@ -5,6 +5,9 @@ * Copyright (C) 2018-2022 SiFive, Inc. * */ + +#define pr_fmt(fmt) "CCACHE: " fmt + #include #include #include @@ -85,13 +88,13 @@ static void ccache_config_read(void) cfg = readl(ccache_base + SIFIVE_CCACHE_CONFIG); - pr_info("CCACHE: %u banks, %u ways, sets/bank=%llu, bytes/block=%llu\n", + pr_info("%u banks, %u ways, sets/bank=%llu, bytes/block=%llu\n", (cfg & 0xff), (cfg >> 8) & 0xff, BIT_ULL((cfg >> 16) & 0xff), BIT_ULL((cfg >> 24) & 0xff)); cfg = readl(ccache_base + SIFIVE_CCACHE_WAYENABLE); - pr_info("CCACHE: Index of the largest way enabled: %u\n", cfg); + pr_info("Index of the largest way enabled: %u\n", cfg); } static const struct of_device_id sifive_ccache_ids[] = { @@ -155,7 +158,7 @@ static irqreturn_t ccache_int_handler(int irq, void *device) if (irq == g_irq[DIR_CORR]) { add_h = readl(ccache_base + SIFIVE_CCACHE_DIRECCFIX_HIGH); add_l = readl(ccache_base + SIFIVE_CCACHE_DIRECCFIX_LOW); - pr_err("CCACHE: DirError @ 0x%08X.%08X\n", add_h, add_l); + pr_err("DirError @ 0x%08X.%08X\n", add_h, add_l); /* Reading this register clears the DirError interrupt sig */ readl(ccache_base + SIFIVE_CCACHE_DIRECCFIX_COUNT); atomic_notifier_call_chain(&ccache_err_chain, @@ -175,7 +178,7 @@ static irqreturn_t ccache_int_handler(int irq, void *device) if (irq == g_irq[DATA_CORR]) { add_h = readl(ccache_base + SIFIVE_CCACHE_DATECCFIX_HIGH); add_l = readl(ccache_base + SIFIVE_CCACHE_DATECCFIX_LOW); - pr_err("CCACHE: DataError @ 0x%08X.%08X\n", add_h, add_l); + pr_err("DataError @ 0x%08X.%08X\n", add_h, add_l); /* Reading this register clears the DataError interrupt sig */ readl(ccache_base + SIFIVE_CCACHE_DATECCFIX_COUNT); atomic_notifier_call_chain(&ccache_err_chain, @@ -185,7 +188,7 @@ static irqreturn_t ccache_int_handler(int irq, void *device) if (irq == g_irq[DATA_UNCORR]) { add_h = readl(ccache_base + SIFIVE_CCACHE_DATECCFAIL_HIGH); add_l = readl(ccache_base + SIFIVE_CCACHE_DATECCFAIL_LOW); - pr_err("CCACHE: DataFail @ 0x%08X.%08X\n", add_h, add_l); + pr_err("DataFail @ 0x%08X.%08X\n", add_h, add_l); /* Reading this register clears the DataFail interrupt sig */ readl(ccache_base + SIFIVE_CCACHE_DATECCFAIL_COUNT); atomic_notifier_call_chain(&ccache_err_chain, @@ -218,7 +221,7 @@ static int __init sifive_ccache_init(void) intr_num = of_property_count_u32_elems(np, "interrupts"); if (!intr_num) { - pr_err("CCACHE: no interrupts property\n"); + pr_err("No interrupts property\n"); return -ENODEV; } @@ -227,7 +230,7 @@ static int __init sifive_ccache_init(void) rc = request_irq(g_irq[i], ccache_int_handler, 0, "ccache_ecc", NULL); if (rc) { - pr_err("CCACHE: Could not request IRQ %d\n", g_irq[i]); + pr_err("Could not request IRQ %d\n", g_irq[i]); return rc; } } -- cgit v1.2.3 From afc7a5834f0de13aee46df62f09e479c1bbf7b9d Mon Sep 17 00:00:00 2001 From: Zong Li Date: Tue, 13 Sep 2022 06:18:16 +0000 Subject: soc: sifive: ccache: define the macro for the register shifts Define the macro for the register shifts, it could make the code be more readable Signed-off-by: Zong Li Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220913061817.22564-7-zong.li@sifive.com Signed-off-by: Palmer Dabbelt --- drivers/soc/sifive/sifive_ccache.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/soc/sifive/sifive_ccache.c b/drivers/soc/sifive/sifive_ccache.c index 91f0c2b32ea2..1c171150e878 100644 --- a/drivers/soc/sifive/sifive_ccache.c +++ b/drivers/soc/sifive/sifive_ccache.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -33,6 +34,11 @@ #define SIFIVE_CCACHE_DATECCFAIL_COUNT 0x168 #define SIFIVE_CCACHE_CONFIG 0x00 +#define SIFIVE_CCACHE_CONFIG_BANK_MASK GENMASK_ULL(7, 0) +#define SIFIVE_CCACHE_CONFIG_WAYS_MASK GENMASK_ULL(15, 8) +#define SIFIVE_CCACHE_CONFIG_SETS_MASK GENMASK_ULL(23, 16) +#define SIFIVE_CCACHE_CONFIG_BLKS_MASK GENMASK_ULL(31, 24) + #define SIFIVE_CCACHE_WAYENABLE 0x08 #define SIFIVE_CCACHE_ECCINJECTERR 0x40 @@ -87,11 +93,11 @@ static void ccache_config_read(void) u32 cfg; cfg = readl(ccache_base + SIFIVE_CCACHE_CONFIG); - - pr_info("%u banks, %u ways, sets/bank=%llu, bytes/block=%llu\n", - (cfg & 0xff), (cfg >> 8) & 0xff, - BIT_ULL((cfg >> 16) & 0xff), - BIT_ULL((cfg >> 24) & 0xff)); + pr_info("%llu banks, %llu ways, sets/bank=%llu, bytes/block=%llu\n", + FIELD_GET(SIFIVE_CCACHE_CONFIG_BANK_MASK, cfg), + FIELD_GET(SIFIVE_CCACHE_CONFIG_WAYS_MASK, cfg), + BIT_ULL(FIELD_GET(SIFIVE_CCACHE_CONFIG_SETS_MASK, cfg)), + BIT_ULL(FIELD_GET(SIFIVE_CCACHE_CONFIG_BLKS_MASK, cfg))); cfg = readl(ccache_base + SIFIVE_CCACHE_WAYENABLE); pr_info("Index of the largest way enabled: %u\n", cfg); -- cgit v1.2.3 From da29dbcda49d60f34055df19bd4783b889fc7dfc Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Tue, 13 Sep 2022 06:18:17 +0000 Subject: riscv: Add cache information in AUX vector There are no standard CSR registers to provide cache information, the way for RISC-V is to get this information from DT. sysconf syscall could use them to get information of cache through AUX vector. The result of 'getconf -a|grep -i cache' as follows: LEVEL1_ICACHE_SIZE 32768 LEVEL1_ICACHE_ASSOC 2 LEVEL1_ICACHE_LINESIZE 64 LEVEL1_DCACHE_SIZE 32768 LEVEL1_DCACHE_ASSOC 4 LEVEL1_DCACHE_LINESIZE 64 LEVEL2_CACHE_SIZE 524288 LEVEL2_CACHE_ASSOC 8 LEVEL2_CACHE_LINESIZE 64 LEVEL3_CACHE_SIZE 4194304 LEVEL3_CACHE_ASSOC 16 LEVEL3_CACHE_LINESIZE 64 LEVEL4_CACHE_SIZE 0 LEVEL4_CACHE_ASSOC 0 LEVEL4_CACHE_LINESIZE 0 Signed-off-by: Greentime Hu Signed-off-by: Zong Li Suggested-by: Zong Li Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220913061817.22564-8-zong.li@sifive.com Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/elf.h | 4 ++++ arch/riscv/include/uapi/asm/auxvec.h | 4 +++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h index 14fc7342490b..e7acffdf21d2 100644 --- a/arch/riscv/include/asm/elf.h +++ b/arch/riscv/include/asm/elf.h @@ -99,6 +99,10 @@ do { \ get_cache_size(2, CACHE_TYPE_UNIFIED)); \ NEW_AUX_ENT(AT_L2_CACHEGEOMETRY, \ get_cache_geometry(2, CACHE_TYPE_UNIFIED)); \ + NEW_AUX_ENT(AT_L3_CACHESIZE, \ + get_cache_size(3, CACHE_TYPE_UNIFIED)); \ + NEW_AUX_ENT(AT_L3_CACHEGEOMETRY, \ + get_cache_geometry(3, CACHE_TYPE_UNIFIED)); \ } while (0) #define ARCH_HAS_SETUP_ADDITIONAL_PAGES struct linux_binprm; diff --git a/arch/riscv/include/uapi/asm/auxvec.h b/arch/riscv/include/uapi/asm/auxvec.h index 32c73ba1d531..fb187a33ce58 100644 --- a/arch/riscv/include/uapi/asm/auxvec.h +++ b/arch/riscv/include/uapi/asm/auxvec.h @@ -30,8 +30,10 @@ #define AT_L1D_CACHEGEOMETRY 43 #define AT_L2_CACHESIZE 44 #define AT_L2_CACHEGEOMETRY 45 +#define AT_L3_CACHESIZE 46 +#define AT_L3_CACHEGEOMETRY 47 /* entries in ARCH_DLINFO */ -#define AT_VECTOR_SIZE_ARCH 7 +#define AT_VECTOR_SIZE_ARCH 9 #endif /* _UAPI_ASM_RISCV_AUXVEC_H */ -- cgit v1.2.3 From a8616d2dc193b6becc36b5f3cfeaa9ac7a5762f9 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Sat, 24 Sep 2022 15:07:37 +0800 Subject: riscv: vdso: fix NULL deference in vdso_join_timens() when vfork Testing tools/testing/selftests/timens/vfork_exec.c got below kernel log: [ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020 [ 6.842255] Oops [#1] [ 6.842871] Modules linked in: [ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8 [ 6.845861] Hardware name: riscv-virtio,qemu (DT) [ 6.848009] epc : vdso_join_timens+0xd2/0x110 [ 6.850097] ra : vdso_join_timens+0xd2/0x110 [ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0 [ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030 [ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40 [ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c [ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000 [ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000 [ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38 [ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e [ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f [ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00 [ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d [ 6.868046] [] timens_commit+0x38/0x11a [ 6.869089] [] timens_on_fork+0x72/0xb4 [ 6.870055] [] begin_new_exec+0x3c6/0x9f0 [ 6.871231] [] load_elf_binary+0x628/0x1214 [ 6.872304] [] bprm_execve+0x1f2/0x4e4 [ 6.873243] [] do_execveat_common+0x16e/0x1ee [ 6.874258] [] sys_execve+0x3c/0x48 [ 6.875162] [] ret_from_syscall+0x0/0x2 [ 6.877484] ---[ end trace 0000000000000000 ]--- This is because the mm->context.vdso_info is NULL in vfork case. From another side, mm->context.vdso_info either points to vdso info for RV64 or vdso info for compat, there's no need to bloat riscv's mm_context_t, we can handle the difference when setup the additional page for vdso. Signed-off-by: Jisheng Zhang Suggested-by: Palmer Dabbelt Fixes: 3092eb456375 ("riscv: compat: vdso: Add setup additional pages implementation") Link: https://lore.kernel.org/r/20220924070737.3048-1-jszhang@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/mmu.h | 1 - arch/riscv/kernel/vdso.c | 13 ++++++++++--- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h index cedcf8ea3c76..0099dc116168 100644 --- a/arch/riscv/include/asm/mmu.h +++ b/arch/riscv/include/asm/mmu.h @@ -16,7 +16,6 @@ typedef struct { atomic_long_t id; #endif void *vdso; - void *vdso_info; #ifdef CONFIG_SMP /* A local icache flush is needed before user execution can resume. */ cpumask_t icache_stale_mask; diff --git a/arch/riscv/kernel/vdso.c b/arch/riscv/kernel/vdso.c index 69b05b6c181b..4abc9aebdfae 100644 --- a/arch/riscv/kernel/vdso.c +++ b/arch/riscv/kernel/vdso.c @@ -60,6 +60,11 @@ struct __vdso_info { struct vm_special_mapping *cm; }; +static struct __vdso_info vdso_info; +#ifdef CONFIG_COMPAT +static struct __vdso_info compat_vdso_info; +#endif + static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struct *new_vma) { @@ -114,15 +119,18 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns) { struct mm_struct *mm = task->mm; struct vm_area_struct *vma; - struct __vdso_info *vdso_info = mm->context.vdso_info; mmap_read_lock(mm); for (vma = mm->mmap; vma; vma = vma->vm_next) { unsigned long size = vma->vm_end - vma->vm_start; - if (vma_is_special_mapping(vma, vdso_info->dm)) + if (vma_is_special_mapping(vma, vdso_info.dm)) zap_page_range(vma, vma->vm_start, size); +#ifdef CONFIG_COMPAT + if (vma_is_special_mapping(vma, compat_vdso_info.dm)) + zap_page_range(vma, vma->vm_start, size); +#endif } mmap_read_unlock(mm); @@ -264,7 +272,6 @@ static int __setup_additional_pages(struct mm_struct *mm, vdso_base += VVAR_SIZE; mm->context.vdso = (void *)vdso_base; - mm->context.vdso_info = (void *)vdso_info; ret = _install_special_mapping(mm, vdso_base, vdso_text_len, -- cgit v1.2.3 From 5a5294fbe0200d1327f0e089135dad77b45aa2ee Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Wed, 28 Sep 2022 06:18:07 -0700 Subject: RISC-V: Re-enable counter access from userspace These counters were part of the ISA when we froze the uABI, removing them breaks userspace. Link: https://lore.kernel.org/all/YxEhC%2FmDW1lFt36J@aurel32.net/ Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Tested-by: Conor Dooley Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220928131807.30386-1-palmer@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- drivers/perf/riscv_pmu_sbi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c index 15e5a47be7d5..3852c18362f5 100644 --- a/drivers/perf/riscv_pmu_sbi.c +++ b/drivers/perf/riscv_pmu_sbi.c @@ -652,8 +652,11 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node) struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node); struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); - /* Enable the access for TIME csr only from the user mode now */ - csr_write(CSR_SCOUNTEREN, 0x2); + /* + * Enable the access for CYCLE, TIME, and INSTRET CSRs from userspace, + * as is necessary to maintain uABI compatibility. + */ + csr_write(CSR_SCOUNTEREN, 0x7); /* Stop all the counters so that they can be enabled from perf */ pmu_sbi_stop_all(pmu); -- cgit v1.2.3 From c45fc916c2b2cc2a0587659c18d6ceef9b7299be Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Fri, 29 Jul 2022 12:11:17 +0100 Subject: riscv: enable software resend of irqs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The PLIC specification does not describe the interrupt pendings bits as read-write, only that they "can be read". To allow for retriggering of interrupts (and the use of the irq debugfs interface) enable HARDIRQS_SW_RESEND for RISC-V. Link: https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc#interrupt-pending-bits Signed-off-by: Conor Dooley Acked-by: Marc Zyngier Acked-by: Palmer Dabbelt Tested-by: Palmer Dabbelt # on QEMU Reviewed-by: Björn Töpel Link: https://lore.kernel.org/r/20220729111116.259146-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index e84f2742b6bb..c56bc70158ac 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -70,6 +70,7 @@ config RISCV select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL if MMU && 64BIT select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO + select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL -- cgit v1.2.3 From 9cc205e3c17d5716da7ebb7fa0c985555e95d009 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 22 Sep 2022 22:56:06 +0100 Subject: RISC-V: Make port I/O string accessors actually work Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [] parport_pc_compat_write_block_pio+0xfe/0x200 [] parport_write+0x46/0xf8 [] lp_write+0x158/0x2d2 [] vfs_write+0x8e/0x2c2 [] ksys_write+0x52/0xc2 [] sys_write+0xe/0x16 [] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work. Signed-off-by: Maciej W. Rozycki Fixes: fab957c11efe2 ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/io.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/riscv/include/asm/io.h b/arch/riscv/include/asm/io.h index 69605a474270..92080a227937 100644 --- a/arch/riscv/include/asm/io.h +++ b/arch/riscv/include/asm/io.h @@ -101,9 +101,9 @@ __io_reads_ins(reads, u32, l, __io_br(), __io_ar(addr)) __io_reads_ins(ins, u8, b, __io_pbr(), __io_par(addr)) __io_reads_ins(ins, u16, w, __io_pbr(), __io_par(addr)) __io_reads_ins(ins, u32, l, __io_pbr(), __io_par(addr)) -#define insb(addr, buffer, count) __insb((void __iomem *)(long)addr, buffer, count) -#define insw(addr, buffer, count) __insw((void __iomem *)(long)addr, buffer, count) -#define insl(addr, buffer, count) __insl((void __iomem *)(long)addr, buffer, count) +#define insb(addr, buffer, count) __insb(PCI_IOBASE + (addr), buffer, count) +#define insw(addr, buffer, count) __insw(PCI_IOBASE + (addr), buffer, count) +#define insl(addr, buffer, count) __insl(PCI_IOBASE + (addr), buffer, count) __io_writes_outs(writes, u8, b, __io_bw(), __io_aw()) __io_writes_outs(writes, u16, w, __io_bw(), __io_aw()) @@ -115,22 +115,22 @@ __io_writes_outs(writes, u32, l, __io_bw(), __io_aw()) __io_writes_outs(outs, u8, b, __io_pbw(), __io_paw()) __io_writes_outs(outs, u16, w, __io_pbw(), __io_paw()) __io_writes_outs(outs, u32, l, __io_pbw(), __io_paw()) -#define outsb(addr, buffer, count) __outsb((void __iomem *)(long)addr, buffer, count) -#define outsw(addr, buffer, count) __outsw((void __iomem *)(long)addr, buffer, count) -#define outsl(addr, buffer, count) __outsl((void __iomem *)(long)addr, buffer, count) +#define outsb(addr, buffer, count) __outsb(PCI_IOBASE + (addr), buffer, count) +#define outsw(addr, buffer, count) __outsw(PCI_IOBASE + (addr), buffer, count) +#define outsl(addr, buffer, count) __outsl(PCI_IOBASE + (addr), buffer, count) #ifdef CONFIG_64BIT __io_reads_ins(reads, u64, q, __io_br(), __io_ar(addr)) #define readsq(addr, buffer, count) __readsq(addr, buffer, count) __io_reads_ins(ins, u64, q, __io_pbr(), __io_par(addr)) -#define insq(addr, buffer, count) __insq((void __iomem *)addr, buffer, count) +#define insq(addr, buffer, count) __insq(PCI_IOBASE + (addr), buffer, count) __io_writes_outs(writes, u64, q, __io_bw(), __io_aw()) #define writesq(addr, buffer, count) __writesq(addr, buffer, count) __io_writes_outs(outs, u64, q, __io_pbr(), __io_paw()) -#define outsq(addr, buffer, count) __outsq((void __iomem *)addr, buffer, count) +#define outsq(addr, buffer, count) __outsq(PCI_IOBASE + (addr), buffer, count) #endif #include -- cgit v1.2.3 From ab0c23b535f3f9d8345d8ad4c18c0a8594459d55 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 11 Oct 2022 17:07:45 +0100 Subject: MAINTAINERS: add RISC-V's patchwork The RISC-V patchwork instance on kernel.org has had some necromancy performed on it & will be used going forward. The statuses that are intended to be used are: - New: No action has been taken yet - Under Review: The maintainer is waiting for review comments from others - Changes Requested: Either the maintainer or a reviewer requested changes in the patch. The patch author is expected to submit a new version - Superseded: There's a new version of the patch available - Not Applicable: The patch is not intended for the RISC-V tree - Accepted: The patch has been applied - Rejected: The patch has been rejected, with reasons stated in an email Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20221011160744.2167025-1-conor@kernel.org/ Signed-off-by: Palmer Dabbelt --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index b3415857a812..557da4a32717 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17634,6 +17634,7 @@ M: Palmer Dabbelt M: Albert Ou L: linux-riscv@lists.infradead.org S: Supported +Q: https://patchwork.kernel.org/project/linux-riscv/list/ P: Documentation/riscv/patch-acceptance.rst T: git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git F: arch/riscv/ -- cgit v1.2.3