From 56a1740c21e4396164265c3ec80e29990ddcdc36 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Wed, 14 Aug 2013 14:23:50 -0700 Subject: leds-pca9633: Rename to leds-pca963x The driver now supports the chips pca9633 and pca9634, therefore we rename the files to more generic and meaningul names Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Bryan Wu --- Documentation/devicetree/bindings/leds/pca9633.txt | 47 --- Documentation/devicetree/bindings/leds/pca963x.txt | 47 +++ drivers/leds/Kconfig | 2 +- drivers/leds/Makefile | 2 +- drivers/leds/leds-pca9633.c | 461 --------------------- drivers/leds/leds-pca963x.c | 461 +++++++++++++++++++++ include/linux/platform_data/leds-pca9633.h | 41 -- include/linux/platform_data/leds-pca963x.h | 42 ++ 8 files changed, 552 insertions(+), 551 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/pca9633.txt create mode 100644 Documentation/devicetree/bindings/leds/pca963x.txt delete mode 100644 drivers/leds/leds-pca9633.c create mode 100644 drivers/leds/leds-pca963x.c delete mode 100644 include/linux/platform_data/leds-pca9633.h create mode 100644 include/linux/platform_data/leds-pca963x.h diff --git a/Documentation/devicetree/bindings/leds/pca9633.txt b/Documentation/devicetree/bindings/leds/pca9633.txt deleted file mode 100644 index aece3eac1b63..000000000000 --- a/Documentation/devicetree/bindings/leds/pca9633.txt +++ /dev/null @@ -1,47 +0,0 @@ -LEDs connected to pca9632, pca9633 or pca9634 - -Required properties: -- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634" - -Optional properties: -- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain -- nxp,hw-blink : use hardware blinking instead of software blinking - -Each led is represented as a sub-node of the nxp,pca963x device. - -LED sub-node properties: -- label : (optional) see Documentation/devicetree/bindings/leds/common.txt -- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633 - or 0 to 7 in pca9634) -- linux,default-trigger : (optional) - see Documentation/devicetree/bindings/leds/common.txt - -Examples: - -pca9632: pca9632 { - compatible = "nxp,pca9632"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x62>; - - red@0 { - label = "red"; - reg = <0>; - linux,default-trigger = "none"; - }; - green@1 { - label = "green"; - reg = <1>; - linux,default-trigger = "none"; - }; - blue@2 { - label = "blue"; - reg = <2>; - linux,default-trigger = "none"; - }; - unused@3 { - label = "unused"; - reg = <3>; - linux,default-trigger = "none"; - }; -}; diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt new file mode 100644 index 000000000000..aece3eac1b63 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/pca963x.txt @@ -0,0 +1,47 @@ +LEDs connected to pca9632, pca9633 or pca9634 + +Required properties: +- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634" + +Optional properties: +- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain +- nxp,hw-blink : use hardware blinking instead of software blinking + +Each led is represented as a sub-node of the nxp,pca963x device. + +LED sub-node properties: +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633 + or 0 to 7 in pca9634) +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +pca9632: pca9632 { + compatible = "nxp,pca9632"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x62>; + + red@0 { + label = "red"; + reg = <0>; + linux,default-trigger = "none"; + }; + green@1 { + label = "green"; + reg = <1>; + linux,default-trigger = "none"; + }; + blue@2 { + label = "blue"; + reg = <2>; + linux,default-trigger = "none"; + }; + unused@3 { + label = "unused"; + reg = <3>; + linux,default-trigger = "none"; + }; +}; diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e7977aa3ee59..a1a52bec03d4 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -291,7 +291,7 @@ config LEDS_PCA955X LED driver chips accessed via the I2C bus. Supported devices include PCA9550, PCA9551, PCA9552, and PCA9553. -config LEDS_PCA9633 +config LEDS_PCA963X tristate "LED support for PCA963x I2C chip" depends on LEDS_CLASS depends on I2C diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 3013113e74d2..c7e35423fed9 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_OT200) += leds-ot200.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o -obj-$(CONFIG_LEDS_PCA9633) += leds-pca9633.o +obj-$(CONFIG_LEDS_PCA963X) += leds-pca963x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o diff --git a/drivers/leds/leds-pca9633.c b/drivers/leds/leds-pca9633.c deleted file mode 100644 index aaa1c4a0dbc5..000000000000 --- a/drivers/leds/leds-pca9633.c +++ /dev/null @@ -1,461 +0,0 @@ -/* - * Copyright 2011 bct electronic GmbH - * Copyright 2013 Qtechnology/AS - * - * Author: Peter Meerwald - * Author: Ricardo Ribalda - * - * Based on leds-pca955x.c - * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * - * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62) - * LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.) - * - * Note that hardware blinking violates the leds infrastructure driver - * interface since the hardware only supports blinking all LEDs with the - * same delay_on/delay_off rates. That is, only the LEDs that are set to - * blink will actually blink but all LEDs that are set to blink will blink - * in identical fashion. The delay_on/delay_off values of the last LED - * that is set to blink will be used for all of the blinking LEDs. - * Hardware blinking is disabled by default but can be enabled by setting - * the 'blink_type' member in the platform_data struct to 'PCA9633_HW_BLINK' - * or by adding the 'nxp,hw-blink' property to the DTS. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* LED select registers determine the source that drives LED outputs */ -#define PCA9633_LED_OFF 0x0 /* LED driver off */ -#define PCA9633_LED_ON 0x1 /* LED driver on */ -#define PCA9633_LED_PWM 0x2 /* Controlled through PWM */ -#define PCA9633_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */ - -#define PCA9633_MODE2_DMBLNK 0x20 /* Enable blinking */ - -#define PCA9633_MODE1 0x00 -#define PCA9633_MODE2 0x01 -#define PCA9633_PWM_BASE 0x02 - -enum pca9633_type { - pca9633, - pca9634, -}; - -struct pca9633_chipdef { - u8 grppwm; - u8 grpfreq; - u8 ledout_base; - int n_leds; -}; - -static struct pca9633_chipdef pca9633_chipdefs[] = { - [pca9633] = { - .grppwm = 0x6, - .grpfreq = 0x7, - .ledout_base = 0x8, - .n_leds = 4, - }, - [pca9634] = { - .grppwm = 0xa, - .grpfreq = 0xb, - .ledout_base = 0xc, - .n_leds = 8, - }, -}; - -/* Total blink period in milliseconds */ -#define PCA9632_BLINK_PERIOD_MIN 42 -#define PCA9632_BLINK_PERIOD_MAX 10667 - -static const struct i2c_device_id pca9633_id[] = { - { "pca9632", pca9633 }, - { "pca9633", pca9633 }, - { "pca9634", pca9634 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, pca9633_id); - -enum pca9633_cmd { - BRIGHTNESS_SET, - BLINK_SET, -}; - -struct pca9633_led; - -struct pca9633 { - struct pca9633_chipdef *chipdef; - struct mutex mutex; - struct i2c_client *client; - struct pca9633_led *leds; -}; - -struct pca9633_led { - struct pca9633 *chip; - struct work_struct work; - enum led_brightness brightness; - struct led_classdev led_cdev; - int led_num; /* 0 .. 7 potentially */ - enum pca9633_cmd cmd; - char name[32]; - u8 gdc; - u8 gfrq; -}; - -static void pca9633_brightness_work(struct pca9633_led *pca9633) -{ - u8 ledout_addr = pca9633->chip->chipdef->ledout_base - + (pca9633->led_num / 4); - u8 ledout; - int shift = 2 * (pca9633->led_num % 4); - u8 mask = 0x3 << shift; - - mutex_lock(&pca9633->chip->mutex); - ledout = i2c_smbus_read_byte_data(pca9633->chip->client, ledout_addr); - switch (pca9633->brightness) { - case LED_FULL: - i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr, - (ledout & ~mask) | (PCA9633_LED_ON << shift)); - break; - case LED_OFF: - i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr, - ledout & ~mask); - break; - default: - i2c_smbus_write_byte_data(pca9633->chip->client, - PCA9633_PWM_BASE + pca9633->led_num, - pca9633->brightness); - i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr, - (ledout & ~mask) | (PCA9633_LED_PWM << shift)); - break; - } - mutex_unlock(&pca9633->chip->mutex); -} - -static void pca9633_blink_work(struct pca9633_led *pca9633) -{ - u8 ledout_addr = pca9633->chip->chipdef->ledout_base + - (pca9633->led_num / 4); - u8 ledout; - u8 mode2 = i2c_smbus_read_byte_data(pca9633->chip->client, - PCA9633_MODE2); - int shift = 2 * (pca9633->led_num % 4); - u8 mask = 0x3 << shift; - - i2c_smbus_write_byte_data(pca9633->chip->client, - pca9633->chip->chipdef->grppwm, pca9633->gdc); - - i2c_smbus_write_byte_data(pca9633->chip->client, - pca9633->chip->chipdef->grpfreq, pca9633->gfrq); - - if (!(mode2 & PCA9633_MODE2_DMBLNK)) - i2c_smbus_write_byte_data(pca9633->chip->client, PCA9633_MODE2, - mode2 | PCA9633_MODE2_DMBLNK); - - mutex_lock(&pca9633->chip->mutex); - ledout = i2c_smbus_read_byte_data(pca9633->chip->client, ledout_addr); - if ((ledout & mask) != (PCA9633_LED_GRP_PWM << shift)) - i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr, - (ledout & ~mask) | (PCA9633_LED_GRP_PWM << shift)); - mutex_unlock(&pca9633->chip->mutex); -} - -static void pca9633_work(struct work_struct *work) -{ - struct pca9633_led *pca9633 = container_of(work, - struct pca9633_led, work); - - switch (pca9633->cmd) { - case BRIGHTNESS_SET: - pca9633_brightness_work(pca9633); - break; - case BLINK_SET: - pca9633_blink_work(pca9633); - break; - } -} - -static void pca9633_led_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct pca9633_led *pca9633; - - pca9633 = container_of(led_cdev, struct pca9633_led, led_cdev); - - pca9633->cmd = BRIGHTNESS_SET; - pca9633->brightness = value; - - /* - * Must use workqueue for the actual I/O since I2C operations - * can sleep. - */ - schedule_work(&pca9633->work); -} - -static int pca9633_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, unsigned long *delay_off) -{ - struct pca9633_led *pca9633; - unsigned long time_on, time_off, period; - u8 gdc, gfrq; - - pca9633 = container_of(led_cdev, struct pca9633_led, led_cdev); - - time_on = *delay_on; - time_off = *delay_off; - - /* If both zero, pick reasonable defaults of 500ms each */ - if (!time_on && !time_off) { - time_on = 500; - time_off = 500; - } - - period = time_on + time_off; - - /* If period not supported by hardware, default to someting sane. */ - if ((period < PCA9632_BLINK_PERIOD_MIN) || - (period > PCA9632_BLINK_PERIOD_MAX)) { - time_on = 500; - time_off = 500; - period = time_on + time_off; - } - - /* - * From manual: duty cycle = (GDC / 256) -> - * (time_on / period) = (GDC / 256) -> - * GDC = ((time_on * 256) / period) - */ - gdc = (time_on * 256) / period; - - /* - * From manual: period = ((GFRQ + 1) / 24) in seconds. - * So, period (in ms) = (((GFRQ + 1) / 24) * 1000) -> - * GFRQ = ((period * 24 / 1000) - 1) - */ - gfrq = (period * 24 / 1000) - 1; - - pca9633->cmd = BLINK_SET; - pca9633->gdc = gdc; - pca9633->gfrq = gfrq; - - /* - * Must use workqueue for the actual I/O since I2C operations - * can sleep. - */ - schedule_work(&pca9633->work); - - *delay_on = time_on; - *delay_off = time_off; - - return 0; -} - -#if IS_ENABLED(CONFIG_OF) -static struct pca9633_platform_data * -pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip) -{ - struct device_node *np = client->dev.of_node, *child; - struct pca9633_platform_data *pdata; - struct led_info *pca9633_leds; - int count; - - count = of_get_child_count(np); - if (!count || count > chip->n_leds) - return ERR_PTR(-ENODEV); - - pca9633_leds = devm_kzalloc(&client->dev, - sizeof(struct led_info) * chip->n_leds, GFP_KERNEL); - if (!pca9633_leds) - return ERR_PTR(-ENOMEM); - - for_each_child_of_node(np, child) { - struct led_info led; - u32 reg; - int res; - - led.name = - of_get_property(child, "label", NULL) ? : child->name; - led.default_trigger = - of_get_property(child, "linux,default-trigger", NULL); - res = of_property_read_u32(child, "reg", ®); - if (res != 0) - continue; - pca9633_leds[reg] = led; - } - pdata = devm_kzalloc(&client->dev, - sizeof(struct pca9633_platform_data), GFP_KERNEL); - if (!pdata) - return ERR_PTR(-ENOMEM); - - pdata->leds.leds = pca9633_leds; - pdata->leds.num_leds = count; - - /* default to open-drain unless totem pole (push-pull) is specified */ - if (of_property_read_bool(np, "nxp,totem-pole")) - pdata->outdrv = PCA9633_TOTEM_POLE; - else - pdata->outdrv = PCA9633_OPEN_DRAIN; - - /* default to software blinking unless hardware blinking is specified */ - if (of_property_read_bool(np, "nxp,hw-blink")) - pdata->blink_type = PCA9633_HW_BLINK; - else - pdata->blink_type = PCA9633_SW_BLINK; - - return pdata; -} - -static const struct of_device_id of_pca9633_match[] = { - { .compatible = "nxp,pca9632", }, - { .compatible = "nxp,pca9633", }, - { .compatible = "nxp,pca9634", }, - {}, -}; -#else -static struct pca9633_platform_data * -pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip) -{ - return ERR_PTR(-ENODEV); -} -#endif - -static int pca9633_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct pca9633 *pca9633_chip; - struct pca9633_led *pca9633; - struct pca9633_platform_data *pdata; - struct pca9633_chipdef *chip; - int i, err; - - chip = &pca9633_chipdefs[id->driver_data]; - pdata = dev_get_platdata(&client->dev); - - if (!pdata) { - pdata = pca9633_dt_init(client, chip); - if (IS_ERR(pdata)) { - dev_warn(&client->dev, "could not parse configuration\n"); - pdata = NULL; - } - } - - if (pdata && (pdata->leds.num_leds < 1 || - pdata->leds.num_leds > chip->n_leds)) { - dev_err(&client->dev, "board info must claim 1-%d LEDs", - chip->n_leds); - return -EINVAL; - } - - pca9633_chip = devm_kzalloc(&client->dev, sizeof(*pca9633_chip), - GFP_KERNEL); - if (!pca9633_chip) - return -ENOMEM; - pca9633 = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca9633), - GFP_KERNEL); - if (!pca9633) - return -ENOMEM; - - i2c_set_clientdata(client, pca9633_chip); - - mutex_init(&pca9633_chip->mutex); - pca9633_chip->chipdef = chip; - pca9633_chip->client = client; - pca9633_chip->leds = pca9633; - - /* Turn off LEDs by default*/ - i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00); - if (chip->n_leds > 4) - i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00); - - for (i = 0; i < chip->n_leds; i++) { - pca9633[i].led_num = i; - pca9633[i].chip = pca9633_chip; - - /* Platform data can specify LED names and default triggers */ - if (pdata && i < pdata->leds.num_leds) { - if (pdata->leds.leds[i].name) - snprintf(pca9633[i].name, - sizeof(pca9633[i].name), "pca9633:%s", - pdata->leds.leds[i].name); - if (pdata->leds.leds[i].default_trigger) - pca9633[i].led_cdev.default_trigger = - pdata->leds.leds[i].default_trigger; - } - if (!pdata || i >= pdata->leds.num_leds || - !pdata->leds.leds[i].name) - snprintf(pca9633[i].name, sizeof(pca9633[i].name), - "pca9633:%d:%.2x:%d", client->adapter->nr, - client->addr, i); - - pca9633[i].led_cdev.name = pca9633[i].name; - pca9633[i].led_cdev.brightness_set = pca9633_led_set; - - if (pdata && pdata->blink_type == PCA9633_HW_BLINK) - pca9633[i].led_cdev.blink_set = pca9633_blink_set; - - INIT_WORK(&pca9633[i].work, pca9633_work); - - err = led_classdev_register(&client->dev, &pca9633[i].led_cdev); - if (err < 0) - goto exit; - } - - /* Disable LED all-call address and set normal mode */ - i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00); - - /* Configure output: open-drain or totem pole (push-pull) */ - if (pdata && pdata->outdrv == PCA9633_OPEN_DRAIN) - i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01); - - return 0; - -exit: - while (i--) { - led_classdev_unregister(&pca9633[i].led_cdev); - cancel_work_sync(&pca9633[i].work); - } - - return err; -} - -static int pca9633_remove(struct i2c_client *client) -{ - struct pca9633 *pca9633 = i2c_get_clientdata(client); - int i; - - for (i = 0; i < pca9633->chipdef->n_leds; i++) { - led_classdev_unregister(&pca9633->leds[i].led_cdev); - cancel_work_sync(&pca9633->leds[i].work); - } - - return 0; -} - -static struct i2c_driver pca9633_driver = { - .driver = { - .name = "leds-pca9633", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(of_pca9633_match), - }, - .probe = pca9633_probe, - .remove = pca9633_remove, - .id_table = pca9633_id, -}; - -module_i2c_driver(pca9633_driver); - -MODULE_AUTHOR("Peter Meerwald "); -MODULE_DESCRIPTION("PCA9633 LED driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c new file mode 100644 index 000000000000..35d56a62f92f --- /dev/null +++ b/drivers/leds/leds-pca963x.c @@ -0,0 +1,461 @@ +/* + * Copyright 2011 bct electronic GmbH + * Copyright 2013 Qtechnology/AS + * + * Author: Peter Meerwald + * Author: Ricardo Ribalda + * + * Based on leds-pca955x.c + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62) + * LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.) + * + * Note that hardware blinking violates the leds infrastructure driver + * interface since the hardware only supports blinking all LEDs with the + * same delay_on/delay_off rates. That is, only the LEDs that are set to + * blink will actually blink but all LEDs that are set to blink will blink + * in identical fashion. The delay_on/delay_off values of the last LED + * that is set to blink will be used for all of the blinking LEDs. + * Hardware blinking is disabled by default but can be enabled by setting + * the 'blink_type' member in the platform_data struct to 'PCA963X_HW_BLINK' + * or by adding the 'nxp,hw-blink' property to the DTS. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* LED select registers determine the source that drives LED outputs */ +#define PCA963X_LED_OFF 0x0 /* LED driver off */ +#define PCA963X_LED_ON 0x1 /* LED driver on */ +#define PCA963X_LED_PWM 0x2 /* Controlled through PWM */ +#define PCA963X_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */ + +#define PCA963X_MODE2_DMBLNK 0x20 /* Enable blinking */ + +#define PCA963X_MODE1 0x00 +#define PCA963X_MODE2 0x01 +#define PCA963X_PWM_BASE 0x02 + +enum pca963x_type { + pca9633, + pca9634, +}; + +struct pca963x_chipdef { + u8 grppwm; + u8 grpfreq; + u8 ledout_base; + int n_leds; +}; + +static struct pca963x_chipdef pca963x_chipdefs[] = { + [pca9633] = { + .grppwm = 0x6, + .grpfreq = 0x7, + .ledout_base = 0x8, + .n_leds = 4, + }, + [pca9634] = { + .grppwm = 0xa, + .grpfreq = 0xb, + .ledout_base = 0xc, + .n_leds = 8, + }, +}; + +/* Total blink period in milliseconds */ +#define PCA963X_BLINK_PERIOD_MIN 42 +#define PCA963X_BLINK_PERIOD_MAX 10667 + +static const struct i2c_device_id pca963x_id[] = { + { "pca9632", pca9633 }, + { "pca9633", pca9633 }, + { "pca9634", pca9634 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pca963x_id); + +enum pca963x_cmd { + BRIGHTNESS_SET, + BLINK_SET, +}; + +struct pca963x_led; + +struct pca963x { + struct pca963x_chipdef *chipdef; + struct mutex mutex; + struct i2c_client *client; + struct pca963x_led *leds; +}; + +struct pca963x_led { + struct pca963x *chip; + struct work_struct work; + enum led_brightness brightness; + struct led_classdev led_cdev; + int led_num; /* 0 .. 7 potentially */ + enum pca963x_cmd cmd; + char name[32]; + u8 gdc; + u8 gfrq; +}; + +static void pca963x_brightness_work(struct pca963x_led *pca963x) +{ + u8 ledout_addr = pca963x->chip->chipdef->ledout_base + + (pca963x->led_num / 4); + u8 ledout; + int shift = 2 * (pca963x->led_num % 4); + u8 mask = 0x3 << shift; + + mutex_lock(&pca963x->chip->mutex); + ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr); + switch (pca963x->brightness) { + case LED_FULL: + i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr, + (ledout & ~mask) | (PCA963X_LED_ON << shift)); + break; + case LED_OFF: + i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr, + ledout & ~mask); + break; + default: + i2c_smbus_write_byte_data(pca963x->chip->client, + PCA963X_PWM_BASE + pca963x->led_num, + pca963x->brightness); + i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr, + (ledout & ~mask) | (PCA963X_LED_PWM << shift)); + break; + } + mutex_unlock(&pca963x->chip->mutex); +} + +static void pca963x_blink_work(struct pca963x_led *pca963x) +{ + u8 ledout_addr = pca963x->chip->chipdef->ledout_base + + (pca963x->led_num / 4); + u8 ledout; + u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client, + PCA963X_MODE2); + int shift = 2 * (pca963x->led_num % 4); + u8 mask = 0x3 << shift; + + i2c_smbus_write_byte_data(pca963x->chip->client, + pca963x->chip->chipdef->grppwm, pca963x->gdc); + + i2c_smbus_write_byte_data(pca963x->chip->client, + pca963x->chip->chipdef->grpfreq, pca963x->gfrq); + + if (!(mode2 & PCA963X_MODE2_DMBLNK)) + i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2, + mode2 | PCA963X_MODE2_DMBLNK); + + mutex_lock(&pca963x->chip->mutex); + ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr); + if ((ledout & mask) != (PCA963X_LED_GRP_PWM << shift)) + i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr, + (ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift)); + mutex_unlock(&pca963x->chip->mutex); +} + +static void pca963x_work(struct work_struct *work) +{ + struct pca963x_led *pca963x = container_of(work, + struct pca963x_led, work); + + switch (pca963x->cmd) { + case BRIGHTNESS_SET: + pca963x_brightness_work(pca963x); + break; + case BLINK_SET: + pca963x_blink_work(pca963x); + break; + } +} + +static void pca963x_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct pca963x_led *pca963x; + + pca963x = container_of(led_cdev, struct pca963x_led, led_cdev); + + pca963x->cmd = BRIGHTNESS_SET; + pca963x->brightness = value; + + /* + * Must use workqueue for the actual I/O since I2C operations + * can sleep. + */ + schedule_work(&pca963x->work); +} + +static int pca963x_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct pca963x_led *pca963x; + unsigned long time_on, time_off, period; + u8 gdc, gfrq; + + pca963x = container_of(led_cdev, struct pca963x_led, led_cdev); + + time_on = *delay_on; + time_off = *delay_off; + + /* If both zero, pick reasonable defaults of 500ms each */ + if (!time_on && !time_off) { + time_on = 500; + time_off = 500; + } + + period = time_on + time_off; + + /* If period not supported by hardware, default to someting sane. */ + if ((period < PCA963X_BLINK_PERIOD_MIN) || + (period > PCA963X_BLINK_PERIOD_MAX)) { + time_on = 500; + time_off = 500; + period = time_on + time_off; + } + + /* + * From manual: duty cycle = (GDC / 256) -> + * (time_on / period) = (GDC / 256) -> + * GDC = ((time_on * 256) / period) + */ + gdc = (time_on * 256) / period; + + /* + * From manual: period = ((GFRQ + 1) / 24) in seconds. + * So, period (in ms) = (((GFRQ + 1) / 24) * 1000) -> + * GFRQ = ((period * 24 / 1000) - 1) + */ + gfrq = (period * 24 / 1000) - 1; + + pca963x->cmd = BLINK_SET; + pca963x->gdc = gdc; + pca963x->gfrq = gfrq; + + /* + * Must use workqueue for the actual I/O since I2C operations + * can sleep. + */ + schedule_work(&pca963x->work); + + *delay_on = time_on; + *delay_off = time_off; + + return 0; +} + +#if IS_ENABLED(CONFIG_OF) +static struct pca963x_platform_data * +pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip) +{ + struct device_node *np = client->dev.of_node, *child; + struct pca963x_platform_data *pdata; + struct led_info *pca963x_leds; + int count; + + count = of_get_child_count(np); + if (!count || count > chip->n_leds) + return ERR_PTR(-ENODEV); + + pca963x_leds = devm_kzalloc(&client->dev, + sizeof(struct led_info) * chip->n_leds, GFP_KERNEL); + if (!pca963x_leds) + return ERR_PTR(-ENOMEM); + + for_each_child_of_node(np, child) { + struct led_info led; + u32 reg; + int res; + + led.name = + of_get_property(child, "label", NULL) ? : child->name; + led.default_trigger = + of_get_property(child, "linux,default-trigger", NULL); + res = of_property_read_u32(child, "reg", ®); + if (res != 0) + continue; + pca963x_leds[reg] = led; + } + pdata = devm_kzalloc(&client->dev, + sizeof(struct pca963x_platform_data), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->leds.leds = pca963x_leds; + pdata->leds.num_leds = count; + + /* default to open-drain unless totem pole (push-pull) is specified */ + if (of_property_read_bool(np, "nxp,totem-pole")) + pdata->outdrv = PCA963X_TOTEM_POLE; + else + pdata->outdrv = PCA963X_OPEN_DRAIN; + + /* default to software blinking unless hardware blinking is specified */ + if (of_property_read_bool(np, "nxp,hw-blink")) + pdata->blink_type = PCA963X_HW_BLINK; + else + pdata->blink_type = PCA963X_SW_BLINK; + + return pdata; +} + +static const struct of_device_id of_pca963x_match[] = { + { .compatible = "nxp,pca9632", }, + { .compatible = "nxp,pca9633", }, + { .compatible = "nxp,pca9634", }, + {}, +}; +#else +static struct pca963x_platform_data * +pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip) +{ + return ERR_PTR(-ENODEV); +} +#endif + +static int pca963x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pca963x *pca963x_chip; + struct pca963x_led *pca963x; + struct pca963x_platform_data *pdata; + struct pca963x_chipdef *chip; + int i, err; + + chip = &pca963x_chipdefs[id->driver_data]; + pdata = dev_get_platdata(&client->dev); + + if (!pdata) { + pdata = pca963x_dt_init(client, chip); + if (IS_ERR(pdata)) { + dev_warn(&client->dev, "could not parse configuration\n"); + pdata = NULL; + } + } + + if (pdata && (pdata->leds.num_leds < 1 || + pdata->leds.num_leds > chip->n_leds)) { + dev_err(&client->dev, "board info must claim 1-%d LEDs", + chip->n_leds); + return -EINVAL; + } + + pca963x_chip = devm_kzalloc(&client->dev, sizeof(*pca963x_chip), + GFP_KERNEL); + if (!pca963x_chip) + return -ENOMEM; + pca963x = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca963x), + GFP_KERNEL); + if (!pca963x) + return -ENOMEM; + + i2c_set_clientdata(client, pca963x_chip); + + mutex_init(&pca963x_chip->mutex); + pca963x_chip->chipdef = chip; + pca963x_chip->client = client; + pca963x_chip->leds = pca963x; + + /* Turn off LEDs by default*/ + i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00); + if (chip->n_leds > 4) + i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00); + + for (i = 0; i < chip->n_leds; i++) { + pca963x[i].led_num = i; + pca963x[i].chip = pca963x_chip; + + /* Platform data can specify LED names and default triggers */ + if (pdata && i < pdata->leds.num_leds) { + if (pdata->leds.leds[i].name) + snprintf(pca963x[i].name, + sizeof(pca963x[i].name), "pca963x:%s", + pdata->leds.leds[i].name); + if (pdata->leds.leds[i].default_trigger) + pca963x[i].led_cdev.default_trigger = + pdata->leds.leds[i].default_trigger; + } + if (!pdata || i >= pdata->leds.num_leds || + !pdata->leds.leds[i].name) + snprintf(pca963x[i].name, sizeof(pca963x[i].name), + "pca963x:%d:%.2x:%d", client->adapter->nr, + client->addr, i); + + pca963x[i].led_cdev.name = pca963x[i].name; + pca963x[i].led_cdev.brightness_set = pca963x_led_set; + + if (pdata && pdata->blink_type == PCA963X_HW_BLINK) + pca963x[i].led_cdev.blink_set = pca963x_blink_set; + + INIT_WORK(&pca963x[i].work, pca963x_work); + + err = led_classdev_register(&client->dev, &pca963x[i].led_cdev); + if (err < 0) + goto exit; + } + + /* Disable LED all-call address and set normal mode */ + i2c_smbus_write_byte_data(client, PCA963X_MODE1, 0x00); + + /* Configure output: open-drain or totem pole (push-pull) */ + if (pdata && pdata->outdrv == PCA963X_OPEN_DRAIN) + i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01); + + return 0; + +exit: + while (i--) { + led_classdev_unregister(&pca963x[i].led_cdev); + cancel_work_sync(&pca963x[i].work); + } + + return err; +} + +static int pca963x_remove(struct i2c_client *client) +{ + struct pca963x *pca963x = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pca963x->chipdef->n_leds; i++) { + led_classdev_unregister(&pca963x->leds[i].led_cdev); + cancel_work_sync(&pca963x->leds[i].work); + } + + return 0; +} + +static struct i2c_driver pca963x_driver = { + .driver = { + .name = "leds-pca963x", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_pca963x_match), + }, + .probe = pca963x_probe, + .remove = pca963x_remove, + .id_table = pca963x_id, +}; + +module_i2c_driver(pca963x_driver); + +MODULE_AUTHOR("Peter Meerwald "); +MODULE_DESCRIPTION("PCA963X LED driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/leds-pca9633.h b/include/linux/platform_data/leds-pca9633.h deleted file mode 100644 index 3c1037a81d34..000000000000 --- a/include/linux/platform_data/leds-pca9633.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * PCA9633 LED chip driver. - * - * Copyright 2012 bct electronic GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef __LINUX_PCA9633_H -#define __LINUX_PCA9633_H -#include - -enum pca9633_outdrv { - PCA9633_OPEN_DRAIN, - PCA9633_TOTEM_POLE, /* aka push-pull */ -}; - -enum pca9633_blink_type { - PCA9633_SW_BLINK, - PCA9633_HW_BLINK, -}; - -struct pca9633_platform_data { - struct led_platform_data leds; - enum pca9633_outdrv outdrv; - enum pca9633_blink_type blink_type; -}; - -#endif /* __LINUX_PCA9633_H*/ diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h new file mode 100644 index 000000000000..e731f0036329 --- /dev/null +++ b/include/linux/platform_data/leds-pca963x.h @@ -0,0 +1,42 @@ +/* + * PCA963X LED chip driver. + * + * Copyright 2012 bct electronic GmbH + * Copyright 2013 Qtechnology A/S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_PCA963X_H +#define __LINUX_PCA963X_H +#include + +enum pca963x_outdrv { + PCA963X_OPEN_DRAIN, + PCA963X_TOTEM_POLE, /* aka push-pull */ +}; + +enum pca963x_blink_type { + PCA963X_SW_BLINK, + PCA963X_HW_BLINK, +}; + +struct pca963x_platform_data { + struct led_platform_data leds; + enum pca963x_outdrv outdrv; + enum pca963x_blink_type blink_type; +}; + +#endif /* __LINUX_PCA963X_H*/ -- cgit v1.2.3