From 25d5c699f983a2da51f5165eb9a8fc6338124b6c Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Sun, 7 Nov 2010 16:22:28 -0500 Subject: mmc: Fix printing of card DDR type We should not call mmc_card_set_ddr_mode() if we are in single data mode. This sets DDR and causes the kernel log to say the card is DDR when it is not. Explicitly set ddr to 0 rather then rely on MMC_SDR_MODE being 0 when doing the checks. Signed-off-by: Philip Rakity Acked-by: Linus Walleij Acked-by: Kyungmin Park Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 995261f7fd70..77f93c3b8808 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = MMC_SDR_MODE; + int err, ddr = 0; u32 cid[4]; unsigned int max_dtr; @@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, 1 << bus_width, ddr); err = 0; } else { - mmc_card_set_ddr_mode(card); + if (ddr) + mmc_card_set_ddr_mode(card); + else + ddr = MMC_SDR_MODE; + mmc_set_bus_width_ddr(card->host, bus_width, ddr); } } -- cgit v1.2.3 From 14d4031d21d8a63ad84e5ab9198d0503efabc780 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 4 Nov 2010 13:59:11 +0800 Subject: mmc: ushc: Return proper error code for ushc_probe() Improves error handling in the ushc driver. Signed-off-by: Axel Lin Acked-by: David Vrabel Signed-off-by: Chris Ball --- drivers/mmc/host/ushc.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c index b4ead4a13c98..f8f65df9b017 100644 --- a/drivers/mmc/host/ushc.c +++ b/drivers/mmc/host/ushc.c @@ -425,7 +425,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id struct usb_device *usb_dev = interface_to_usbdev(intf); struct mmc_host *mmc; struct ushc_data *ushc; - int ret = -ENOMEM; + int ret; mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev); if (mmc == NULL) @@ -462,11 +462,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id mmc->max_blk_count = 511; ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->int_urb == NULL) + if (ushc->int_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL); - if (ushc->int_data == NULL) + if (ushc->int_data == NULL) { + ret = -ENOMEM; goto err; + } usb_fill_int_urb(ushc->int_urb, ushc->usb_dev, usb_rcvintpipe(usb_dev, intf->cur_altsetting->endpoint[0].desc.bEndpointAddress), @@ -475,11 +479,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id intf->cur_altsetting->endpoint[0].desc.bInterval); ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->cbw_urb == NULL) + if (ushc->cbw_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); - if (ushc->cbw == NULL) + if (ushc->cbw == NULL) { + ret = -ENOMEM; goto err; + } ushc->cbw->signature = USHC_CBW_SIGNATURE; usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2), @@ -487,15 +495,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id cbw_callback, ushc); ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->data_urb == NULL) + if (ushc->data_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->csw_urb == NULL) + if (ushc->csw_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); - if (ushc->csw == NULL) + if (ushc->csw == NULL) { + ret = -ENOMEM; goto err; + } usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6), ushc->csw, sizeof(struct ushc_csw), csw_callback, ushc); -- cgit v1.2.3 From 5f619704d18b93869d045abc49e09cdba109b04b Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 4 Nov 2010 22:20:39 +0000 Subject: mmc: sdhci: Properly enable SDIO IRQ wakeups A little more work was needed for SDIO IRQ wakeups to be functional. Wake-on-WLAN on the SD WiFi adapter in the XO-1.5 laptop is now working. Signed-off-by: Daniel Drake Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 11 +++++++++-- drivers/mmc/host/sdhci.c | 10 ++++++++++ drivers/mmc/host/sdhci.h | 4 ++++ 3 files changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 55746bac2f44..d196e77a93dc 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -637,6 +637,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) { struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; + mmc_pm_flag_t slot_pm_flags; mmc_pm_flag_t pm_flags = 0; int i, ret; @@ -657,7 +658,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) return ret; } - pm_flags |= slot->host->mmc->pm_flags; + slot_pm_flags = slot->host->mmc->pm_flags; + if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ) + sdhci_enable_irq_wakeups(slot->host); + + pm_flags |= slot_pm_flags; } if (chip->fixes && chip->fixes->suspend) { @@ -671,8 +676,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) pci_save_state(pdev); if (pm_flags & MMC_PM_KEEP_POWER) { - if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) + if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) { + pci_pme_active(pdev, true); pci_enable_wake(pdev, PCI_D3hot, 1); + } pci_set_power_state(pdev, PCI_D3hot); } else { pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 782c0ee3c925..154cbf83c1ab 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1681,6 +1681,16 @@ int sdhci_resume_host(struct sdhci_host *host) EXPORT_SYMBOL_GPL(sdhci_resume_host); +void sdhci_enable_irq_wakeups(struct sdhci_host *host) +{ + u8 val; + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val |= SDHCI_WAKE_ON_INT; + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} + +EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups); + #endif /* CONFIG_PM */ /*****************************************************************************\ diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index b7b8a3b28b01..d52a7163b97a 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -87,6 +87,9 @@ #define SDHCI_BLOCK_GAP_CONTROL 0x2A #define SDHCI_WAKE_UP_CONTROL 0x2B +#define SDHCI_WAKE_ON_INT 0x01 +#define SDHCI_WAKE_ON_INSERT 0x02 +#define SDHCI_WAKE_ON_REMOVE 0x04 #define SDHCI_CLOCK_CONTROL 0x2C #define SDHCI_DIVIDER_SHIFT 8 @@ -317,6 +320,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead); #ifdef CONFIG_PM extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); extern int sdhci_resume_host(struct sdhci_host *host); +extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); #endif #endif /* __SDHCI_HW_H */ -- cgit v1.2.3 From 37865fe91582582a6f6c00652f6a2b1ff71f8a78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Sat, 23 Oct 2010 01:57:21 +0200 Subject: mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes timeout problems on i.MX's sdhci as suggested by Richard Zhu. Tested on: - i.MX257: not needed - i.MX357: needed - i.MX515: needed More details can be found here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-October/029748.html Signed-off-by: Eric Bénard Tested-by: Shawn Guo Acked-by: Wolfram Sang Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 2e9cca19c90b..28e63ef58d0f 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "sdhci.h" #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -112,6 +113,9 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd clk_enable(clk); pltfm_host->clk = clk; + if (cpu_is_mx35() || cpu_is_mx51()) + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + return 0; } -- cgit v1.2.3 From 16a790bcce87740d219b7227eaa4df72804097ea Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Sat, 23 Oct 2010 01:57:22 +0200 Subject: mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only these CPUs list the bug in their errata. Signed-off-by: Eric Bénard Acked-by: Wolfram Sang Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 28e63ef58d0f..9b82910b9dbb 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -116,6 +116,10 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd if (cpu_is_mx35() || cpu_is_mx51()) host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + /* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */ + if (cpu_is_mx25() || cpu_is_mx35()) + host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK; + return 0; } @@ -137,10 +141,8 @@ static struct sdhci_ops sdhci_esdhc_ops = { }; struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { - .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK - | SDHCI_QUIRK_BROKEN_ADMA, + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA, /* ADMA has issues. Might be fixable */ - /* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */ .ops = &sdhci_esdhc_ops, .init = esdhc_pltfm_init, .exit = esdhc_pltfm_exit, -- cgit v1.2.3 From 35ac6f081f26e1b6b3482b9c8dfccebe7817c691 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 9 Nov 2010 13:57:29 +0000 Subject: mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms SDHC2 is newly added in C0 stepping of Langwell. Without the Moorestown specific quirk, the default pci_probe will be called and crash the kernel. This patch unblocks the crash problem on C0 by using the same probing function as HC1, which limits the number of slots to one. Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 20 ++++++++++++++------ include/linux/pci_ids.h | 1 + 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index d196e77a93dc..3d9c2460d437 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -149,11 +149,11 @@ static const struct sdhci_pci_fixes sdhci_cafe = { * ADMA operation is disabled for Moorestown platform due to * hardware bugs. */ -static int mrst_hc1_probe(struct sdhci_pci_chip *chip) +static int mrst_hc_probe(struct sdhci_pci_chip *chip) { /* - * slots number is fixed here for MRST as SDIO3 is never used and has - * hardware bugs. + * slots number is fixed here for MRST as SDIO3/5 are never used and + * have hardware bugs. */ chip->num_slots = 1; return 0; @@ -163,9 +163,9 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = { .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT, }; -static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = { +static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = { .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT, - .probe = mrst_hc1_probe, + .probe = mrst_hc_probe, }; static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = { @@ -538,7 +538,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_INTEL_MRST_SD1, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1, + .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_MRST_SD2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2, }, { diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index c6bcfe93b9ca..d369b533dc2a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2441,6 +2441,7 @@ #define PCI_DEVICE_ID_INTEL_MFD_SDIO2 0x0822 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824 +#define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 #define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062 -- cgit v1.2.3 From d9bcbf343ec63e1104b5276195888ee06b4d086f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 11 Nov 2010 17:32:25 +0100 Subject: mmc: fix rmmod race for hosts using card-detection polling MMC hosts that poll for card detection by defining the MMC_CAP_NEEDS_POLL flag have a race on rmmod, where the delayed work is cancelled without waiting for completed polling. To prevent this a _sync version of the work cancellation has to be used. Signed-off-by: Guennadi Liakhovetski Cc: Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 8f86d702e46e..31ae07a36576 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1559,7 +1559,7 @@ void mmc_stop_host(struct mmc_host *host) if (host->caps & MMC_CAP_DISABLE) cancel_delayed_work(&host->disable); - cancel_delayed_work(&host->detect); + cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); /* clear pm flags now and let card drivers set them as needed */ -- cgit v1.2.3 From b432b4b3440a34c1430fcd66bab783640724bd28 Mon Sep 17 00:00:00 2001 From: kishore kadiyala Date: Wed, 17 Nov 2010 22:35:32 -0500 Subject: mmc: omap4: hsmmc: Fix improper card detection while booting While booting OMAP4 ES2.0 boards, cards on MMC1 and MMC2 controllers are not getting detected sometimes. During reset of command/data line, wrong pointer to base address was passed while read operation to SYSCTL register, thus impacting the updated reset logic. Passing the correct base address fixes the issue. Signed-off-by: Kishore Kadiyala Acked-by: Felipe Balbi Acked-by: Madhusudhan Chikkature Acked-by: Tony Lindgren Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 82a1079bbdc7..5d46021cbb57 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1002,7 +1002,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, * Monitor a 0->1 transition first */ if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) { - while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit)) + while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit)) && (i++ < limit)) cpu_relax(); } -- cgit v1.2.3 From 4d0812c37f2f6cf6fc7ca086b5a5e572cbbe7f6d Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Sun, 14 Nov 2010 12:40:33 +0200 Subject: mmc: sdio: fix nasty oops in mmc_sdio_detect Power off the card in mmc_sdio_detect __before__ a potential error handler, which completely removes the card, executes, and only if the card was successfully powered on beforehand. While we're at it, use the _sync variant of the runtime PM put API, in order to ensure that the card is left powered off in case an error occurred, and the card is going to be removed. Reproduced and tested on the OLPC XO-1.5. Reported-by: Daniel Drake Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball --- drivers/mmc/core/sdio.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index c3ad1058cd31..42a949b723b8 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -560,6 +560,19 @@ static void mmc_sdio_detect(struct mmc_host *host) mmc_release_host(host); + /* + * Tell PM core it's OK to power off the card now. + * + * The _sync variant is used in order to ensure that the card + * is left powered off in case an error occurred, and the card + * is going to be removed. + * + * Since there is no specific reason to believe a new user + * is about to show up at this point, the _sync variant is + * desirable anyway. + */ + pm_runtime_put_sync(&host->card->dev); + out: if (err) { mmc_sdio_remove(host); @@ -568,9 +581,6 @@ out: mmc_detach_bus(host); mmc_release_host(host); } - - /* Tell PM core that we're done */ - pm_runtime_put(&host->card->dev); } /* -- cgit v1.2.3 From ed919b0125b26dcc052e44836f66e7e1f5c49c7e Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Fri, 19 Nov 2010 09:29:09 +0200 Subject: mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD Some board/card/host configurations are not capable of powering off the card after boot. To support such configurations, and to allow smoother transition to runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to explicitly indicate whether it's OK to power off their cards after boot. SDIO core will enable runtime PM for a card only if that cap is set. As a result, the card will be powered down after boot, and will only be powered up again when a driver is loaded (and then it's up to the driver to decide whether power will be kept or not). This will prevent sdio_bus_probe() failures with setups that do not support powering off the card. Reported-and-tested-by: Daniel Drake Reported-and-tested-by: Arnd Hannemann Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball --- drivers/mmc/core/sdio.c | 37 +++++++++++++++++++++++-------------- drivers/mmc/core/sdio_bus.c | 33 ++++++++++++++++++++++----------- include/linux/mmc/host.h | 1 + 3 files changed, 46 insertions(+), 25 deletions(-) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 42a949b723b8..efef5f94ac42 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host) BUG_ON(!host->card); /* Make sure card is powered before detecting it */ - err = pm_runtime_get_sync(&host->card->dev); - if (err < 0) - goto out; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + err = pm_runtime_get_sync(&host->card->dev); + if (err < 0) + goto out; + } mmc_claim_host(host); @@ -571,7 +573,8 @@ static void mmc_sdio_detect(struct mmc_host *host) * is about to show up at this point, the _sync variant is * desirable anyway. */ - pm_runtime_put_sync(&host->card->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(&host->card->dev); out: if (err) { @@ -728,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) card = host->card; /* - * Let runtime PM core know our card is active + * Enable runtime PM only if supported by host+card+board */ - err = pm_runtime_set_active(&card->dev); - if (err) - goto remove; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + /* + * Let runtime PM core know our card is active + */ + err = pm_runtime_set_active(&card->dev); + if (err) + goto remove; - /* - * Enable runtime PM for this card - */ - pm_runtime_enable(&card->dev); + /* + * Enable runtime PM for this card + */ + pm_runtime_enable(&card->dev); + } /* * The number of functions on the card is encoded inside @@ -755,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove; /* - * Enable Runtime PM for this func + * Enable Runtime PM for this func (if supported) */ - pm_runtime_enable(&card->sdio_func[i]->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_enable(&card->sdio_func[i]->dev); } mmc_release_host(host); diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 2716c7ab6bbf..203da443e339 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -17,6 +17,7 @@ #include #include +#include #include #include "sdio_cis.h" @@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev) * it should call pm_runtime_put_noidle() in its probe routine and * pm_runtime_get_noresume() in its remove routine. */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } /* Set the default block size so the driver is sure it's something * sensible. */ @@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev) return 0; disable_runtimepm: - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; } @@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev) { struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); - int ret; + int ret = 0; /* Make sure card is powered before invoking ->remove() */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } drv->remove(func); @@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev) } /* First, undo the increment made directly above */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); /* Then undo the runtime PM settings in sdio_bus_probe() */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; @@ -191,6 +199,8 @@ out: static int sdio_bus_pm_prepare(struct device *dev) { + struct sdio_func *func = dev_to_sdio_func(dev); + /* * Resume an SDIO device which was suspended at run time at this * point, in order to allow standard SDIO suspend/resume paths @@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev) * since there is little point in failing system suspend if a * device can't be resumed. */ - pm_runtime_resume(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_resume(dev); return 0; } diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6d87f68ce4b6..30f6fad99a58 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -168,6 +168,7 @@ struct mmc_host { /* DDR mode at 1.8V */ #define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ /* DDR mode at 1.2V */ +#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ mmc_pm_flag_t pm_caps; /* supported pm features */ -- cgit v1.2.3 From 15ec44611904be0dcc97b84c29fbf964e5e2b36f Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Fri, 19 Nov 2010 16:48:39 -0500 Subject: mmc: sdhci: 8-bit bus width changes We now: * check for a v3 controller before setting 8-bit bus width * offer a callback for platform code to switch to 8-bit mode, which allows non-v3 controllers to support it * rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify that the board designers have indeed brought out all the pins for 8-bit to the slot. We were previously relying only on whether the *controller* supported 8-bit, which doesn't tell us anything about the pin configuration in the board design. This fixes the MMC card regression reported by Maxim Levitsky here: http://thread.gmane.org/gmane.linux.kernel.mmc/4336 by no longer assuming that 8-bit works by default. Signed-off-by: Philip Rakity Tested-by: Giuseppe Cavallaro Signed-off-by: Chris Ball --- arch/arm/plat-pxa/include/plat/sdhci.h | 3 +++ drivers/mmc/host/sdhci-pxa.c | 4 ++++ drivers/mmc/host/sdhci.c | 44 +++++++++++++++++++++++++--------- drivers/mmc/host/sdhci.h | 5 +++- 4 files changed, 44 insertions(+), 12 deletions(-) diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h index e49c5b6fc4e2..1ab332e37d7d 100644 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ b/arch/arm/plat-pxa/include/plat/sdhci.h @@ -17,6 +17,9 @@ /* Require clock free running */ #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) +/* Board design supports 8-bit data on SD/SDIO BUS */ +#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) + /* * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI * @max_speed: the maximum speed supported diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c index fc406ac5d193..5a61208cbc66 100644 --- a/drivers/mmc/host/sdhci-pxa.c +++ b/drivers/mmc/host/sdhci-pxa.c @@ -141,6 +141,10 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev) if (pdata->quirks) host->quirks |= pdata->quirks; + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + ret = sdhci_add_host(host); if (ret) { dev_err(&pdev->dev, "failed to add host\n"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 154cbf83c1ab..a25db426c910 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->ops->platform_send_init_74_clocks) host->ops->platform_send_init_74_clocks(host, ios->power_mode); - ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); - - if (ios->bus_width == MMC_BUS_WIDTH_8) - ctrl |= SDHCI_CTRL_8BITBUS; - else - ctrl &= ~SDHCI_CTRL_8BITBUS; + /* + * If your platform has 8-bit width support but is not a v3 controller, + * or if it requires special setup code, you should implement that in + * platform_8bit_width(). + */ + if (host->ops->platform_8bit_width) + host->ops->platform_8bit_width(host, ios->bus_width); + else { + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if (ios->bus_width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + if (host->version >= SDHCI_SPEC_300) + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + if (host->version >= SDHCI_SPEC_300) + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (ios->bus_width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } - if (ios->bus_width == MMC_BUS_WIDTH_4) - ctrl |= SDHCI_CTRL_4BITBUS; - else - ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); if ((ios->timing == MMC_TIMING_SD_HS || ios->timing == MMC_TIMING_MMC_HS) @@ -1855,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; + mmc->f_max = host->max_clk; mmc->caps |= MMC_CAP_SDIO_IRQ; + /* + * A controller may support 8-bit width, but the board itself + * might not have the pins brought out. Boards that support + * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in + * their platform code before calling sdhci_add_host(), and we + * won't assume 8-bit width for hosts without that CAP. + */ if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + mmc->caps |= MMC_CAP_4_BIT_DATA; if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index d52a7163b97a..e42d7f00c060 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -76,7 +76,7 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -155,6 +155,7 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_8BIT 0x00040000 #define SDHCI_CAN_DO_ADMA2 0x00080000 #define SDHCI_CAN_DO_ADMA1 0x00100000 #define SDHCI_CAN_DO_HISPD 0x00200000 @@ -215,6 +216,8 @@ struct sdhci_ops { unsigned int (*get_max_clock)(struct sdhci_host *host); unsigned int (*get_min_clock)(struct sdhci_host *host); unsigned int (*get_timeout_clock)(struct sdhci_host *host); + int (*platform_8bit_width)(struct sdhci_host *host, + int width); void (*platform_send_init_74_clocks)(struct sdhci_host *host, u8 power_mode); unsigned int (*get_ro)(struct sdhci_host *host); -- cgit v1.2.3